summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-09-07Merge branch 'pci/dpc' into nextBjorn Helgaas2-10/+187
* pci/dpc: PCI/DPC: Add local struct device pointers PCI/DPC: Add eDPC support
2017-09-07Merge branch 'pci/aer' into nextBjorn Helgaas4-141/+19
* pci/aer: PCI/AER: Reformat AER register definitions PCI/portdrv: Move error handler methods to struct pcie_port_service_driver
2017-09-07Merge branch 'pci/endpoint' into nextBjorn Helgaas11-78/+276
* pci/endpoint: tools: PCI: Add a missing option help line misc: pci_endpoint_test: Enable/Disable MSI using module param misc: pci_endpoint_test: Avoid using hard-coded BAR sizes misc: pci_endpoint_test: Add support to not enable MSI interrupts misc: pci_endpoint_test: Add support to provide aligned buffer addresses misc: pci_endpoint_test: Add support for PCI_ENDPOINT_TEST regs to be mapped to any BAR PCI: designware-ep: Do not disable BARs during initialization PCI: dra7xx: Reset all BARs during initialization PCI: dwc: designware: Provide page_size to pci_epc_mem PCI: endpoint: Remove the ->remove() callback PCI: endpoint: Add support to poll early for host commands PCI: endpoint: Add support to use _any_ BAR to map PCI_ENDPOINT_TEST regs PCI: endpoint: Do not reset *command* inadvertently PCI: endpoint: Add "volatile" to pci_epf_test_reg PCI: endpoint: Add support for configurable page size PCI: endpoint: Make ->remove() callback optional PCI: endpoint: Add an API to get matching "pci_epf_device_id" PCI: endpoint: Use of_dma_configure() to set initial DMA mask
2017-09-07Merge branch 'pci/host-xilinx' into nextBjorn Helgaas3-45/+28
* pci/host-xilinx: PCI: xilinx-nwl: Fix platform_get_irq() error handling PCI: xilinx: Allow build on MIPS platforms PCI: xilinx: Don't enable config completion interrupts PCI: xilinx: Unify INTx & MSI interrupt decode PCI: xilinx-nwl: Translate INTx range to hwirqs 0-3 PCI: xilinx: Translate INTx range to hwirqs 0-3
2017-09-07Merge branch 'pci/host-xgene' into nextBjorn Helgaas2-22/+21
* pci/host-xgene: PCI: xgene: Clean up whitespace PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset PCI: xgene: Fix platform_get_irq() error handling
2017-09-07Merge branch 'pci/host-vmd' into nextBjorn Helgaas5-19/+42
* pci/host-vmd: iommu/vt-d: Prevent VMD child devices from being remapping targets x86/PCI: Use is_vmd() rather than relying on the domain number x86/PCI: Move VMD quirk to x86 fixups MAINTAINERS: Add Jonathan Derrick as VMD maintainer PCI: vmd: Remove IRQ affinity so we can allocate more IRQs PCI: vmd: Free up IRQs on suspend path PCI: vmd: Assign vector zero to all bridges PCI: vmd: Reserve IRQ pre-vector for better affinity
2017-09-07Merge branch 'pci/host-tegra' into nextBjorn Helgaas1-3/+3
* pci/host-tegra: PCI: tegra: Explicitly request exclusive reset control
2017-09-07Merge branch 'pci/host-spear13xx' into nextBjorn Helgaas1-2/+2
* pci/host-spear13xx: PCI: spear13xx: Fix platform_get_irq() error handling
2017-09-07Merge branch 'pci/host-rockchip' into nextBjorn Helgaas5-163/+433
* pci/host-rockchip: PCI: rockchip: Fix platform_get_irq() error handling PCI: rockchip: Umap IO space if probe fails PCI: rockchip: Remove IRQ domain if probe fails PCI: rockchip: Disable vpcie0v9 if resume_noirq fails PCI: rockchip: Clean up PHY if driver probe or resume fails PCI: rockchip: Factor out rockchip_pcie_deinit_phys() PCI: rockchip: Factor out rockchip_pcie_disable_clocks() PCI: rockchip: Factor out rockchip_pcie_enable_clocks() PCI: rockchip: Factor out rockchip_pcie_setup_irq() PCI: rockchip: Use gpiod_set_value_cansleep() to allow reset via expanders PCI: rockchip: Use PCI_NUM_INTX PCI: rockchip: Explicitly request exclusive reset control dt-bindings: phy-rockchip-pcie: Convert to per-lane PHY model dt-bindings: PCI: rockchip: Convert to per-lane PHY model arm64: dts: rockchip: convert PCIe to use per-lane PHYs for rk3339 PCI: rockchip: Idle inactive PHY(s) phy: rockchip-pcie: Reconstruct driver to support per-lane PHYs PCI: rockchip: Add per-lane PHY support PCI: rockchip: Factor out rockchip_pcie_get_phys() PCI: rockchip: Control optional 12v power supply dt-bindings: PCI: rockchip: Add vpcie12v-supply for Rockchip PCIe controller
2017-09-07Merge branch 'pci/host-rcar' into nextBjorn Helgaas2-8/+11
* pci/host-rcar: PCI: rcar: Add device tree support for r8a7743/5 PCI: rcar: Fix memory leak when no PCIe card is inserted PCI: rcar: Fix error exit path
2017-09-07Merge branch 'pci/host-qcom' into nextBjorn Helgaas2-87/+323
* pci/host-qcom: PCI: qcom: Add support for IPQ8074 PCIe controller dt-bindings: PCI: qcom: Add support for IPQ8074 PCI: qcom: Use block IP version for operations PCI: qcom: Explicitly request exclusive reset control PCI: qcom: Use gpiod_set_value_cansleep() to allow reset via expanders
2017-09-07Merge branch 'pci/host-mvebu' into nextBjorn Helgaas1-2/+1
* pci/host-mvebu: PCI: mvebu: Remove unneeded gpiod NULL check
2017-09-07Merge branch 'pci/host-mediatek' into nextBjorn Helgaas4-200/+975
* pci/host-mediatek: PCI: mediatek: Use PCI_NUM_INTX PCI: mediatek: Add MSI support for MT2712 and MT7622 PCI: mediatek: Use bus->sysdata to get host private data dt-bindings: PCI: Add support for MT2712 and MT7622 PCI: mediatek: Add controller support for MT2712 and MT7622 dt-bindings: PCI: Cleanup MediaTek binding text dt-bindings: PCI: Rename MediaTek binding PCI: mediatek: Switch to use platform_get_resource_byname() PCI: mediatek: Add a structure to abstract the controller generations PCI: mediatek: Rename port->index and mtk_pcie_parse_ports() PCI: mediatek: Use readl_poll_timeout() to wait for Gen2 training PCI: mediatek: Explicitly request exclusive reset control
2017-09-07Merge branch 'pci/host-layerscape' into nextBjorn Helgaas5-49/+92
* pci/host-layerscape: PCI: layerscape: Add support for ls1088a PCI: layerscape: Add support for ls2088a PCI: artpec6: Stop enabling writes to DBI read-only registers PCI: layerscape: Remove unnecessary class code fixup PCI: dwc: Enable write permission for Class Code, Interrupt Pin updates PCI: dwc: Add accessors for write permission of DBI read-only registers PCI: layerscape: Disable outbound windows configured by bootloader PCI: layerscape: Refactor ls1021_pcie_host_init() PCI: layerscape: Move generic init functions earlier in file PCI: layerscape: Add class code and multifunction fixups for ls1021a PCI: layerscape: Move STRFMR1 access out from the DBI write-enable bracket PCI: layerscape: Call dw_pcie_setup_rc() from ls_pcie_host_init()
2017-09-07Merge branch 'pci/host-kirin' into nextBjorn Helgaas1-1/+1
* pci/host-kirin: PCI: kirin: Constify dw_pcie_host_ops structure
2017-09-07Merge branch 'pci/host-keystone' into nextBjorn Helgaas3-18/+4
* pci/host-keystone: PCI: keystone: Use PCI_NUM_INTX PCI: keystone: Remove duplicate MAX_*_IRQS defs PCI: keystone-dw: Remove unused ks_pcie, pci variables
2017-09-07Merge branch 'pci/host-iproc' into nextBjorn Helgaas4-152/+259
* pci/host-iproc: PCI: iproc: Clean up whitespace PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP PCI: iproc: Add 500ms delay during device shutdown PCI: iproc: Work around Stingray CRS defects PCI: iproc: Factor out memory-mapped config access address calculation PCI: iproc: Remove unused struct iproc_pcie *pcie
2017-09-07Merge branch 'pci/host-imx6' into nextBjorn Helgaas1-3/+4
* pci/host-imx6: PCI: imx6: Explicitly request exclusive reset control
2017-09-07Merge branch 'pci/host-hv' into nextBjorn Helgaas1-1/+7
* pci/host-hv: PCI: hv: Do not sleep in compose_msi_msg()
2017-09-07Merge branch 'pci/host-hisi' into nextBjorn Helgaas1-4/+1
* pci/host-hisi: PCI: hisi: Constify dw_pcie_host_ops structure PCI: hisi: Remove unused variable driver
2017-09-07Merge branch 'pci/host-faraday' into nextBjorn Helgaas1-3/+3
* pci/host-faraday: PCI: faraday: Use PCI_NUM_INTX PCI: faraday: Fix of_irq_get() error check
2017-09-07Merge branch 'pci/host-exynos' into nextBjorn Helgaas1-4/+4
* pci/host-exynos: PCI: exynos: Fix platform_get_irq() error handling
2017-09-07Merge branch 'pci/host-dra7xx' into nextBjorn Helgaas1-4/+4
* pci/host-dra7xx: PCI: dra7xx: Fix platform_get_irq() error handling PCI: dra7xx: Propagate platform_get_irq() errors in dra7xx_pcie_probe() PCI: dra7xx: Use PCI_NUM_INTX
2017-09-07Merge branch 'pci/host-designware' into nextBjorn Helgaas14-28/+73
* pci/host-designware: PCI: dwc: Clear MSI interrupt status after it is handled, not before PCI: qcom: Allow ->post_init() to fail PCI: qcom: Don't unroll init if ->init() fails PCI: dwc: designware: Handle ->host_init() failures PCI: dwc: designware: Test PCIE_ATU_ENABLE bit specifically PCI: dwc: designware: Make dw_pcie_prog_*_atu_unroll() static
2017-09-07Merge branch 'pci/host-artpec6' into nextBjorn Helgaas1-2/+2
* pci/host-artpec6: PCI: artpec6: Fix platform_get_irq() error handling
2017-09-07Merge branch 'pci/host-armada' into nextBjorn Helgaas1-3/+5
* pci/host-armada: PCI: armada8k: Fix platform_get_irq() error handling PCI: armada8k: Check the return value from clk_prepare_enable()
2017-09-07Merge branch 'pci/host-altera' into nextBjorn Helgaas2-11/+8
* pci/host-altera: PCI: altera: Fix platform_get_irq() error handling PCI: altera: Use size=4 IRQ domain for legacy INTx PCI: altera: Remove unused num_of_vectors variable
2017-09-07Merge branch 'pci/host-aardvark' into nextBjorn Helgaas1-3/+2
* pci/host-aardvark: PCI: aardvark: Use PCI_NUM_INTX
2017-09-07Merge branch 'pci/irq-intx' into nextBjorn Helgaas2-8/+55
* pci/irq-intx: PCI: Add pci_irqd_intx_xlate() PCI: Move enum pci_interrupt_pin to linux/pci.h
2017-09-07PCI: xgene: Clean up whitespaceBjorn Helgaas1-19/+18
Use tabs (not spaces) for indentation. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-09-07PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offsetBjorn Helgaas1-2/+2
Apparently the PCIe capability is at address 0x40 in config space of X-Gene v1 Root Ports. Add a definition of that and use the generic PCI_EXP_RTCTL offset into the capability. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-09-07PCI: xgene: Fix platform_get_irq() error handlingFabio Estevam1-1/+1
When platform_get_irq() fails we should propagate the real error value instead of always returning -EINVAL. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Duc Dang <dhdang@apm.com>
2017-09-05PCI: xilinx-nwl: Fix platform_get_irq() error handlingFabio Estevam1-1/+1
When platform_get_irq() fails we should propagate the real error value instead of always returning -EINVAL. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Michal Simek <michal.simek@xilinx.com>
2017-09-05PCI: rockchip: Fix platform_get_irq() error handlingFabio Estevam1-3/+3
When platform_get_irq() fails we should propagate the real error value instead of always returning -EINVAL. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Shawn Lin <shawn.lin@rock-chips.com>
2017-09-05PCI: altera: Fix platform_get_irq() error handlingFabio Estevam2-4/+4
platform_get_irq() returns a negative number on failure, so adjust the logic to detect such condition and propagate the real error value on failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ley Foon Tan <lftan@altera.com>
2017-09-05PCI: spear13xx: Fix platform_get_irq() error handlingFabio Estevam1-2/+2
platform_get_irq() returns a negative number on failure, so adjust the logic to detect such condition and propagate the real error value on failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Pratyush Anand <pratyush.anand@gmail.com>
2017-09-05PCI: artpec6: Fix platform_get_irq() error handlingFabio Estevam1-2/+2
platform_get_irq() returns a negative number on failure, so adjust the logic to detect such condition and propagate the real error value on failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Niklas Cassel <niklas.cassel@axis.com>
2017-09-05PCI: armada8k: Fix platform_get_irq() error handlingFabio Estevam1-2/+2
platform_get_irq() returns a negative number on failure, so adjust the logic to detect such condition and propagate the real error value on failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-09-05PCI: dra7xx: Fix platform_get_irq() error handlingFabio Estevam1-1/+1
When platform_get_irq() fails we should propagate the real error value instead of always returning -EINVAL. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-05PCI: exynos: Fix platform_get_irq() error handlingFabio Estevam1-4/+4
platform_get_irq() returns a negative number on failure, so adjust the logic to detect such condition and propagate the real error value on failure. Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jingoohan1@gmail.com>
2017-09-05PCI: iproc: Clean up whitespaceBjorn Helgaas1-116/+115
Use tabs (not spaces) for indentation. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-09-05PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAPBjorn Helgaas1-10/+9
PCI_EXP_CAP is an iProc-specific value, so rename it to IPROC_PCI_EXP_CAP to make it obvious that it's not related to the generic values like PCI_EXP_RTCTL, etc. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-09-05PCI: iproc: Add 500ms delay during device shutdownOza Pawandeep3-15/+33
During soft reset (e.g., "reboot" from Linux) on some iProc-based SOCs, the LCPLL clock and PERST both go off simultaneously. This seems in accordance with the PCIe Card Electromechanical spec, r2.0, sec 2.2.3, which says the clock goes inactive after PERST# goes active, but doesn't specify how long the clock should be valid after PERST#. However, we have observed that with the iProc Stingray, some Intel NVMe endpoints, e.g., the P3700 400GB series, are not detected correctly upon the next boot sequence unless the clock remains valid for some time after PERST# is asserted. Delay 500ms after asserting PERST# before performing a reboot. The 500ms is experimentally determined. Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com> [bhelgaas: changelog, add spec reference, fold in iproc_pcie_shutdown() export from Arnd Bergmann <arnd@arndb.de>] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
2017-08-31PCI/AER: Reformat AER register definitionsBjorn Helgaas1-16/+10
Reformat so comments fit on same line as definition. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-31iommu/vt-d: Prevent VMD child devices from being remapping targetsJon Derrick1-0/+7
VMD child devices must use the VMD endpoint's ID as the requester. Because of this, there needs to be a way to link the parent VMD endpoint's IOMMU group and associated mappings to the VMD child devices such that attaching and detaching child devices modify the endpoint's mappings, while preventing early detaching on a singular device removal or unbinding. The reassignment of individual VMD child devices devices to VMs is outside the scope of VMD, but may be implemented in the future. For now it is best to prevent any such attempts. Prevent VMD child devices from returning an IOMMU, which prevents it from exposing an iommu_group sysfs directory and allowing subsequent binding by userspace-access drivers such as VFIO. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-31x86/PCI: Use is_vmd() rather than relying on the domain numberJon Derrick1-1/+1
Use the is_vmd() predicate to identify devices below a VMD host rather than relying on the domain number. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-31x86/PCI: Move VMD quirk to x86 fixupsJon Derrick2-17/+17
VMD currently only exists for Intel x86 products, so move the VMD quirk to arch/x86. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-31MAINTAINERS: Add Jonathan Derrick as VMD maintainerJon Derrick1-0/+1
Add Jonathan Derrick as VMD maintainer. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2017-08-31PCI: vmd: Remove IRQ affinity so we can allocate more IRQsKeith Busch1-10/+2
VMD hardware has to share its vectors among child devices in its PCI domain so we should allocate as many as possible rather than just ones that can be affinitized. pci_alloc_irq_vectors_affinity() limits the number of affinitized IRQs to the number of present CPUs (see irq_calc_affinity_vectors()). But we'd prefer to have more vectors, even if they aren't distributed across the CPUs, so use pci_alloc_irq_vectors() instead. Reported-by: Brad Goodman <Bradley.Goodman@dell.com> Signed-off-by: Keith Busch <keith.busch@intel.com> [bhelgaas: add irq_calc_affinity_vectors() reference to changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-30PCI: rcar: Add device tree support for r8a7743/5Biju Das1-2/+5
Add internal PCI bridge support for r8a7743/5 SoC. The Renesas RZ/G1[ME] (R8A7743/5) internal PCI bridge is identical to the R-Car Gen2 family. This doesn't change the driver, so it does nothing by itself. But it does mean that checkpatch won't complain about a future patch that adds "renesas,pci-r8a7743" to a DT, which helps ensure that shipped DTs use documented compatibility strings. Signed-off-by: Biju Das <biju.das@bp.renesas.com> [bhelgaas: add explanatory note] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-07 08:46:44 +0300