summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-29Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo20-150/+580
ath.git patches for 4.17. Major changes: ath10k * enable chip temperature measurement for QCA6174/QCA9377 * add firmware memory dump for QCA9984 * enable buffer STA on TDLS link for QCA6174 * support different beacon internals in multiple interface scenario for QCA988X/QCA99X0/QCA9984/QCA4019
2018-03-29ath: Remove unnecessary ath_bcast_mac and use eth_broadcast_addrJoe Perches4-5/+3
Remove the static array and use the generic routine to set the Ethernet broadcast address. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: fix vdev stats for 10.4 firmwareRajkumar Manoharan4-21/+184
Currently vdev stats displayed in fw_stats are applicable only for TLV based firmware and fix it for 10.4 firmware as of now. The vdev stats in 10.4 firmware is split into two parts (vdev_stats, vdev_stats_extended). The actual stats are captured only in extended vdev stats. In order to enable vdev stats, appropriate feature bit will be set on extended resource config. As FTM related counters are available only on newer 10.4 based firmware, these counters will be displayed only on valid data. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: fix recent bandwidth conversion bugChristian Lamparter1-18/+24
The commit "cfg80211: make RATE_INFO_BW_20 the default" changed the index of RATE_INFO_BW_20, but the updates to ath10k missed the special bandwidth calculation case in ath10k_update_per_peer_tx_stats(). This will fix below warning, WARNING: CPU: 0 PID: 609 at net/wireless/util.c:1254 cfg80211_calculate_bitrate+0x174/0x220 invalid rate bw=1, mcs=9, nss=2 (unwind_backtrace) from (cfg80211_calculate_bitrate+0x174/0x220) (cfg80211_calculate_bitrate) from (nl80211_put_sta_rate+0x44/0x1dc)from (nl80211_put_sta_rate) from (nl80211_send_station+0x388/0xaf0) (nl80211_get_station+0xa8/0xec) [ end trace da8257d6a850e91a ] Fixes: 842be75c77cb ("cfg80211: make RATE_INFO_BW_20 the default") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: advertize beacon_int_min_gcdAnilkumar Kolli1-0/+2
This patch fixes regression caused by 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals"), with this change cfg80211 expects the driver to advertize 'beacon_int_min_gcd' to support different beacon intervals in multivap scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019. Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and 1000msec respectively. Frimware: firmware-5.bin_10.4-3.5.3-00053 Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals") Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: fix TDLS peer TX data failure issue on encryped APYingying Tang1-0/+4
For WPA encryption, QCA6174 firmware(version: WLAN.RM.4.4) will unblock data when M4 was sent successfully. For other encryption which didn't need 4-way handshake firmware will unblock the data when peer authorized. Since TDLS is 3-way handshake host need send authorize cmd to firmware to unblock data. Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: avoid to set WEP key for TDLS peerYingying Tang1-1/+1
TDLS peer do not need WEP key. Setting WEP key will lead to TDLS setup failure. Add fix to avoid setting WEP key for TDLS peer. Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: enable TDLS peer inactivity detectionYingying Tang3-0/+60
Enable TDLS peer inactivity detetion feature. QCA6174 firmware(version: WLAN.RM.4.4) support TDLS link inactivity detecting. Set related parameters in TDLS WMI command to enable this feature. Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: enable TDLS peer buffer STA featureYingying Tang2-0/+6
Enable TDLS peer buffer STA feature. QCA6174 firmware(version: WLAN.RM.4.4) support TDLS peer buffer STA, it reports this capability through wmi service map in wmi service ready event. Set related parameter in TDLS WMI command to enable this feature. Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29wcn36xx: dequeue all pending indicator messagesDaniel Mack1-43/+52
In case wcn36xx_smd_rsp_process() is called more than once before hal_ind_work was dispatched, the messages will end up in hal_ind_queue, but wcn36xx_ind_smd_work() will only look at the first message in that list. Fix this by dequeing the messages from the list in a loop, and only stop when it's empty. This issue was found during a review of the driver. In my tests, that race never actually occured. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29wcn36xx: Fix firmware crash due to corrupted buffer addressLoic Poulain3-32/+16
wcn36xx_start_tx function retrieves the buffer descriptor from the channel control queue to start filling tx buffer information. However, nothing prevents this same buffer to be concurrently accessed in a concurent tx call, leading to potential buffer coruption and firmware crash (observed during iperf test). The channel control queue should only be accessed and updated with the channel lock. Fix this issue by using a local buffer descriptor which will be copied in the thread-safe wcn36xx_dxe_tx_frame. Note that buffer descriptor size is few bytes so the introduced copy overhead is insignificant. Moreover, this allows to keep the locked section minimal. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29wcn36xx: turn off probe response offloadingRamon Fried1-2/+0
It appears that the WCN36xx firmware doesn't actually respond to probe requests. Until it's resolved, switch the probe response responsibility to the 802.11 layer to allow creation of hidden SSID AP's. Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: add memory dump support QCA9984Anilkumar Kolli3-0/+135
QCA9984/QCA99X0/QCA4019 chipsets have 8 memory regions, dump all of them to the firmware coredump file. Some of the regions need to be read using ioread() so add new region types for them. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> [kvalo: refactoring etc] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: refactor ath10k_pci_dump_memory() in preparation for QCA9984 supportKalle Valo1-19/+36
As QCA9984 needs two region types refactor the code to make it easier add the new types. No functional changes. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: suppress "Unknown eventid: 36925" warningsSathishkumar Muruganandam1-0/+1
FW has Smart Logging feature enabled by default for detecting failures and processing FATAL_CONDITION_EVENTID (36925 - 0x903D) back to host. Since ath10k doesn't implement the Smart Logging and FATAL CONDITION EVENT processing yet, suppressing the unknown event ID warning by moving this under ATH10K_DBG_WMI. Simulated the same issue by having associated STA powered off when ping flood was running from AP backbone. This triggerd STA KICKOUT in AP followed by FATAL CONDITION event 36925. Issue was reproduced and verified in below DUT ------------------------------------------------ AP mode of OpenWRT QCA9984 running 6.0.8 with FW ver 10.4-3.5.3-00053 Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: add FW API 6 firmware image for QCA9377Ryan Hsu1-0/+1
Firmware WLAN.TF.2.1-00014-QCARMSWP-1 now supports reading the board ID information and also required 9 IRAM bank, which older ath10k version don't have the support will fail to be enabled, so in order to maintain the backward compatibility, we need to update the FW API to 6. Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: enable QCA6174/QCA9377 to read the chip temperatureRyan Hsu2-2/+48
The firmware of QCA6174/QCA9377 already support the feature, just enable it to be able to handle the get_temperature command and process the event. You can read the temperature by using the hwmon interface, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Verified with the following hardware and software combination, QCA6174, only firmware-4.bin doesn't support this, otherwise all support. QCA9377, all the firmwares upstreamed support this command Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29Revert "ath10k: send (re)assoc peer command when NSS changed"Karthikeyan Periyasamy1-3/+2
This reverts commit 55884c045d31a29cf69db8332d1064a1b61dd159. When Ath10k is in AP mode and an unassociated STA sends a VHT action frame (Operating Mode Notification for the NSS change) periodically to AP this causes ath10k to call ath10k_station_assoc() which sends WMI_PEER_ASSOC_CMDID during NSS update. Over the time (with a certain client it can happen within 15 mins when there are over 500 of these VHT action frames) continuous calls of WMI_PEER_ASSOC_CMDID cause firmware to assert due to resource exhaust. To my knowledge setting WMI_PEER_NSS peer param itself enough to handle NSS updates and no need to call ath10k_station_assoc(). So revert the original commit from 2014 as it's unclear why the change was really needed. Now the firmware assert doesn't happen anymore. Issue observed in QCA9984 platform with firmware version:10.4-3.5.3-00053. This Change tested in QCA9984 with firmware version: 10.4-3.5.3-00053 and QCA988x platform with firmware version: 10.2.4-1.0-00036. Firmware Assert log: ath10k_pci 0002:01:00.0: firmware crashed! (guid e61f1274-9acd-4c5b-bcca-e032ea6e723c) ath10k_pci 0002:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0002:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1 ath10k_pci 0002:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 4c56a386 ath10k_pci 0002:01:00.0: board_file api 2 bmi_id 0:4 crc32 c2271344 ath10k_pci 0002:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0002:01:00.0: firmware register dump: ath10k_pci 0002:01:00.0: [00]: 0x0000000A 0x000015B3 0x00981E5F 0x00975B31 ath10k_pci 0002:01:00.0: [04]: 0x00981E5F 0x00060530 0x00000011 0x00446C60 ath10k_pci 0002:01:00.0: [08]: 0x0042F1FC 0x00458080 0x00000017 0x00000000 ath10k_pci 0002:01:00.0: [12]: 0x00000009 0x00000000 0x00973ABC 0x00973AD2 ath10k_pci 0002:01:00.0: [16]: 0x00973AB0 0x00960E62 0x009606CA 0x00000000 ath10k_pci 0002:01:00.0: [20]: 0x40981E5F 0x004066DC 0x00400000 0x00981E34 ath10k_pci 0002:01:00.0: [24]: 0x80983B48 0x0040673C 0x000000C0 0xC0981E5F ath10k_pci 0002:01:00.0: [28]: 0x80993DEB 0x0040676C 0x00431AB8 0x0045D0C4 ath10k_pci 0002:01:00.0: [32]: 0x80993E5C 0x004067AC 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [36]: 0x80994AAB 0x004067DC 0x00000000 0x0045D0C4 ath10k_pci 0002:01:00.0: [40]: 0x809971A0 0x0040681C 0x004303C0 0x00441B00 ath10k_pci 0002:01:00.0: [44]: 0x80991904 0x0040688C 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [48]: 0x80963AD3 0x00406A7C 0x004303C0 0x009918FC ath10k_pci 0002:01:00.0: [52]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000 ath10k_pci 0002:01:00.0: [56]: 0x80960E51 0x00406ACC 0x00400000 0x00000000 ath10k_pci 0002:01:00.0: Copy Engine register dump: ath10k_pci 0002:01:00.0: index: addr: sr_wr_idx: sr_r_idx: dst_wr_idx: dst_r_idx: ath10k_pci 0002:01:00.0: [00]: 0x0004a000 15 15 3 3 ath10k_pci 0002:01:00.0: [01]: 0x0004a400 17 17 212 213 ath10k_pci 0002:01:00.0: [02]: 0x0004a800 21 21 20 21 ath10k_pci 0002:01:00.0: [03]: 0x0004ac00 25 25 27 25 ath10k_pci 0002:01:00.0: [04]: 0x0004b000 515 515 144 104 ath10k_pci 0002:01:00.0: [05]: 0x0004b400 28 28 155 156 ath10k_pci 0002:01:00.0: [06]: 0x0004b800 12 12 12 12 ath10k_pci 0002:01:00.0: [07]: 0x0004bc00 1 1 1 1 ath10k_pci 0002:01:00.0: [08]: 0x0004c000 0 0 127 0 ath10k_pci 0002:01:00.0: [09]: 0x0004c400 1 1 1 1 ath10k_pci 0002:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0002:01:00.0: [11]: 0x0004cc00 0 0 0 0 ath10k_pci 0002:01:00.0: CE[1] write_index 212 sw_index 213 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: CE[2] write_index 20 sw_index 21 hw_index 0 nentries_mask 0x0000007f ath10k_pci 0002:01:00.0: CE[5] write_index 155 sw_index 156 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: DMA addr: nbytes: meta data: byte swap: gather: ath10k_pci 0002:01:00.0: [455]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [456]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [457]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [458]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [459]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [460]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [461]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [462]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [463]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [464]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [465]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [466]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [467]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [468]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [469]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [470]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [471]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [472]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [473]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [474]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [475]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [476]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [477]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [478]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [479]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [480]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [481]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [482]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [483]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [484]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [485]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [486]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [487]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [488]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [489]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [490]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [491]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [492]: 0x58174040 0 1 0 0 ath10k_pci 0002:01:00.0: [493]: 0x5a946040 0 1 0 0 ath10k_pci 0002:01:00.0: [494]: 0x59909040 0 1 0 0 ath10k_pci 0002:01:00.0: [495]: 0x5ae5a040 0 1 0 0 ath10k_pci 0002:01:00.0: [496]: 0x58096040 0 1 0 0 ath10k_pci 0002:01:00.0: [497]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [498]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [499]: 0x5c1e0040 0 1 0 0 ath10k_pci 0002:01:00.0: [500]: 0x58153040 0 1 0 0 ath10k_pci 0002:01:00.0: [501]: 0x58129040 0 1 0 0 ath10k_pci 0002:01:00.0: [502]: 0x5952f040 0 1 0 0 ath10k_pci 0002:01:00.0: [503]: 0x59535040 0 1 0 0 ath10k_pci 0002:01:00.0: [504]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [505]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [506]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [507]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [508]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [509]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [510]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [511]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [512]: 0x5adcc040 0 1 0 0 ath10k_pci 0002:01:00.0: [513]: 0x5cf3d040 0 1 0 0 ath10k_pci 0002:01:00.0: [514]: 0x5c1e9040 64 1 0 0 ath10k_pci 0002:01:00.0: [515]: 0x00000000 0 0 0 0 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath9k: fix DFS detector synchronizationTimothy Redaelli1-4/+5
some userspace programs (e.g. hostapd) need to set the regulatory domain before selecting the operating channel. Synchronize DFS detector regardless of the value of ah->curchan, to avoid situations where wireless scan can't be done on some 5GHz sub-bands, because dfs_region is constantly UNSET. Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Timothy Redaelli <tredaelli@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29Merge tag 'iwlwifi-next-for-kalle-2018-03-28' of ↵Kalle Valo18-196/+600
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for 4.14 * Fix a UBSAN warning; * Improvement in the net-stack/driver log syncing * An RCU lock fix in the new rate-scaling code; * Support for new PCI IDs for the 9000 family; * Support for a new API version; * Initial work for supporting the new ETSI rules; * Support for advanced dwell in scanning; * Support for OCE in scanning; * Some debugging improvements; * Other small improvements and cleanups here and there.
2018-03-28iwlwifi: wrt: add fw force restart via triggersShahar S Matityahu2-1/+17
We can set triggers that cause a debug data collection when something of interest happens (e.g. when too many probes are lost conscutively). Normally, this triggers don't cause the FW to be restarted, but in some cases that may be desired, so we recover from the problem. To support this, add a flag that indicates that the FW should be restarted when the trigger fires. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: save low latency causes in an enumSara Sharon3-17/+38
Currently we have a boolean variable for each cause. This costs space, and requires to check each separately when determining low latency. Since we have another cause incoming, convert it to an enum. While at it, move the retrieval of the prev value and the assignment of the new value to be inside iwl_mvm_update_low_latency and save the need for each caller to do it separately. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: bump the max API version for 9000 and 22000 devicesEmmanuel Grumbach2-2/+6
We are now ready to load 38.ucode Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: api: Add geographic profile information to MCC_UPDATE_CMDHaim Dreyfuss1-3/+17
Some geographic profiles require specific handling. For example ETSI profile requires special channel access handling. Add geographic profile information to MCC_UPDATE response to allow it. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: add a bunch of new 9000 PCI IDsLuca Coelho1-2/+155
A lot of new PCI IDs were added for the 9000 series. Add them to the list of supported PCI IDs. Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: fw api: support the new scan request FW API versionAyala Beker4-54/+136
Remove fragmented_dwell_time and add num_of_fragments to support the new API version. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: Allow iwl_mvm_mac_mgd_prepare_tx() when associatedIlan Peer1-3/+1
The FW does not allocate quota air time for the binding of a station MAC before iwlmvm indicates that it is associated. Currently iwlmvm indicates that the MAC is associated only after hearing a beacon from the AP. In case a deauthentication frame is sent before the MAC is associated, the frame might not be sent as the corresponding binding is not scheduled. To handle such cases, set IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP in the HW flags, requesting mac80211 to call the mgd_prepare_tx() callback before transmitting a deauthentication frame if associated but no beacon was heard from the AP. In addition, do not warn in iwl_mvm_mac_mgd_prepare_tx() when already associated as now the callback can be called also when associated. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: add support for oceZamir, Roee5-1/+44
Add support for Optimized Connectivity Experience (OCE). Get capabilities from the fw, expose them with nl80211, and enable them in UMAC scan if the relevant nl80211 flags are set by the userspace. Signed-off-by: Roee Zamir <roee.zamir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: add adaptive dwell supportZamir, Roee2-33/+67
Update the scan command API with support for adaptive dwell. Adaptive dwell is a type of scan that dynamically changes the time it remains on each channel listening for beacons or probe responses. Signed-off-by: Roee Zamir <roee.zamir@intel.com> Signed-off-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: check if mac80211_queue is valid in iwl_mvm_disable_txqLuca Coelho1-2/+9
Sometimes iwl_mvm_disable_txq() may be called with mac80211_queue == IEEE80211_INVAL_HW_QUEUE, and this would cause us to use BIT(0xFF) which is way too large for the u16 we used to store it in hw_queue_to_mac820211. If this happens the following UBSAN warning will be generated: [ 167.185167] UBSAN: Undefined behaviour in drivers/net/wireless/intel/iwlwifi/mvm/utils.c:838:5 [ 167.185171] shift exponent 255 is too large for 64-bit type 'long unsigned int' Fix that by checking that it is not IEEE80211_INVAL_HW_QUEUE and, while at it, add a warning if the queue number is larger than IEEE80211_MAX_QUEUES. Fixes: 34e10860ae8d ("iwlwifi: mvm: remove references to queue_info in new TX path") Reported-by: Paul Menzel <pmenzel+linux-wireless@molgen.mpg.de> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: set default timstamp marker cmdMordechay Goodstein3-9/+24
In case debug configuration is started with LDBG cmd also start timestamp marker for syncing logs witn the FW. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: move TSO segment to a separate functionSara Sharon1-75/+83
This makes future bail-outs from transmitting an AMSDU more readable. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: take RCU lock before dereferencingSara Sharon1-1/+5
RCU isn't properly locked. Fixes: 46d372af9935 ("iwlwifi: mvm: rs: new rate scale API - add FW notifications") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: flip AMSDU addresses only for 9000 familySara Sharon1-10/+15
Hardware bug was fixed in later generation. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo15-82/+225
Requested by Luca, needed for upcoming patch "iwlwifi: add a bunch of new 9000 PCI IDs".
2018-03-27mt76x2: fix warning in ieee80211_get_key_rx_seq()Lorenzo Bianconi1-0/+11
Fall back to software encryption for hw unsupported ciphers in order to fix the following warning in ieee80211_get_key_rx_seq routine: WARNING: CPU: 1 PID: 1277 at backports-2017-11-01/net/mac80211/key.c: 1010 mt76_wcid_key_setup+0x6c/0x138 [mt76] CPU: 1 PID: 1277 Comm: hostapd Tainted: G W 4.9.86 #0 Stack : 00000000 00000000 80527b4a 00000042 80523824 00000000 00000000 80520000 8fd79a9c 804bbda7 80454c84 00000001 000004fd 80523824 8f7e4ba0 8eceda12 00000010 8006af94 00000001 80520000 804c1f04 804c1f08 80459890 8ec999b4 00000003 800a7840 8f7e4ba0 8eceda12 8121de20 00000000 00000001 00c999b4 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ... Call Trace: [<8000f52c>] show_stack+0x70/0x8c [<801d8d04>] dump_stack+0x94/0xd0 [<8002bcd4>] __warn+0x110/0x118 [<8002bd70>] warn_slowpath_null+0x1c/0x2c [<8f0415cc>] mt76_wcid_key_setup+0x6c/0x138 [mt76] [<8f1311b4>] mt76x2_dma_cleanup+0xa38/0x1048 [mt76x2e] Fixes: 30ce7f4456ae ("mt76: validate rx CCMP PN") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27mt76x2: fix possible NULL pointer dereferencing in mt76x2_tx()Lorenzo Bianconi1-1/+4
Fix a theoretical NULL pointer dereferencing in mt76x2_tx routine that can occurs for injected frames in a monitor vif since vif pointer could be NULL for that interfaces Fixes: 23405236460b ("mt76: fix transmission of encrypted mgmt frames") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27mt76: use mt76_poll_msec routine in mt76pci_load_firmware()Lorenzo Bianconi1-11/+2
Use mt76_poll_msec() in mt76pci_load_firmware to check if the firmware has been started instead of explicitly poll MCU running register Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmsmac: allocate ucode with GFP_KERNELTakashi Iwai1-2/+2
The brcms_ucode_init_buf() duplicates the ucode chunks via kmemdup() with GFP_ATOMIC as a precondition of wl->lock acquired. This caused allocation failures sometimes as reported in the bugzilla below. When looking at the the real usage, one can find that it's called solely from brcms_request_fw(), and it's obviously outside the lock. Hence we can use GFP_KERNEL there safely for avoiding such allocation errors. Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=1085174 Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: add kerneldoc for struct brcmf_bus::msgbufArend Van Spriel1-0/+1
This field did not have kerneldoc description so adding it now. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: get rid of brcmf_fw_get_full_name()Arend Van Spriel1-10/+4
The function was pretty minimal and now it is called only from one place so just get rid of it. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: get rid of brcmf_fw_map_chip_to_name()Arend Van Spriel2-57/+0
The function is no longer used so removing it. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: add extension to .get_fwname() callbacksArend Van Spriel5-78/+51
This changes the bus layer api by having the caller provide an extension. With this the callback can use brcmf_fw_alloc_request() to get the needed firmware name. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: introduce brcmf_fw_alloc_request() functionArend Van Spriel5-60/+147
The function brcmf_fw_alloc_request() takes a list of required files and allocated the struct brcmf_fw_request instance accordingly. The request can be modified by the caller before being passed to the brcmf_fw_request_firmwares() function. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: pass struct in brcmf_fw_get_firmwares()Arend Van Spriel5-86/+245
Make the function brcmf_fw_get_firmwares() a bit more easy to extend using a structure to pass the request parameters. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: derive firmware filenames from basename mappingArend Van Spriel5-98/+96
Instead of defining individual filenames for firmware and nvram use a basename and derive the names from that. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: use wiphy debugfs dir entryArend Van Spriel12-74/+47
The driver used to create a brcmfmac dir entry at the top level debugfs mount point. This moves the debugfs entries into the wiphy debugfs dir entry. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: allocate struct brcmf_pub instance using wiphy_new()Arend Van Spriel7-61/+76
Rework the driver so the wiphy instance holds the main driver information in its private buffer. Previously it held struct brcmf_cfg80211_info instance so a bit of reorg was needed. This was done so that the wiphy name or its parent device can be shown in debug output. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: use brcmf_chip_name() for consistencyArend Van Spriel2-5/+7
When logging the chip id/revision information make use of brcmf_chip_name() so it is always the same. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: use brcmf_chip_name() to store name in revinfoArend Van Spriel5-22/+26
The chip id can either be four or five digits. For the chip name either the hexadecimal value needs to be taken (four digits) or the decimal value (five digits). The function brcmf_chip_name() does this conversion so use it to store the name in driver revision info. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 10:05:29 +0300