summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-08-15Bluetooth: trivial: Shorten variable scopeAndrei Emeltchenko1-4/+2
Make code more clear by moving sk and bt vars to the place where they are actually used. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-15Bluetooth: Add type information to the hci_connect() debug statementVinicius Costa Gomes1-1/+1
Now that we have a "connect" function for each link type, we should be able to indentify which function is going to be called. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-15Bluetooth: Simplify a the connection type handlingVinicius Costa Gomes1-4/+7
Now that we have separate ways of doing connections for each link type, we can do better than an "if" statement to handle each link type. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-15Bluetooth: Refactor SCO connection into its own functionVinicius Costa Gomes1-14/+19
We can do the same that we did for the other link types, for SCO connections. The only thing that's worth noting is that as SCO links need an ACL link, this functions uses the function that adds an ACL link. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-15Bluetooth: Refactor ACL connection into its own functionVinicius Costa Gomes1-10/+22
The hci_connect() function was starting to get too complicated to be quickly understood. We can separate the creation of a new ACL connection into its own function. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-15Bluetooth: Refactor LE connection into its own functionVinicius Costa Gomes1-24/+29
The code that handles LE connection is already quite separated from the rest of the connection procedure, so we can easily put it into its own. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-15Bluetooth: Rename LE and ACL connection functionsVinicius Costa Gomes1-9/+9
These names were causing much confusion, so we rename these functions that send HCI commands to be more similar in naming to the actual HCI commands that will be sent. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-15Bluetooth: Remove some functions from being exportedVinicius Costa Gomes2-4/+2
Some connection related functions are only used inside hci_conn.c so no need to have them exported. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-13p54: fix powerpc gcc warningsChristian Lamparter1-4/+8
My commit "p54: parse output power table" introduced the following compiler warnings for powerpc-allmodconfig eeprom.c: In function 'p54_get_maxpower': eeprom.c:291 warning: comparison of distinct pointer types lacks a cast eeporm.c:292 warning: comparison of distinct pointer types lacks a cast eeprom.c:293 warning: comparison of distinct pointer types lacks a cast eeprom.c:294 warning: comparison of distinct pointer types lacks a cast This patch fixes those by using max_t(u16 which forces a type cast. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-13mac80211: fix unnecessary beacon update after peering status changeMarco Porsch3-34/+33
ieee80211_bss_info_change_notify is called everytime a peer link is established or closed, because the accepting_plinks flag in the meshconf IE *might* have changed. With this patch the corresponding functions return the BSS_CHANGED_BEACON flag when a beacon update is necessary. Also it makes mesh_accept_plinks_update the common place to update the accepting_plinks flag. mesh_accept_plinks_update is called upon plink change and also periodically from ieee80211_mesh_housekeeping. Thus, it also picks up changes of local->num_sta. Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> Acked-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10brcmsmac: document firmware dependenciesJeff Mahoney1-1/+3
The brcmsmac driver requests firmware but doesn't document the dependency. This means that software that analyzes the modules to determine if firmware is needed won't detect it. Specifically, (at least) openSUSE won't install the kernel-firmware package if no hardware requires it. This patch adds the MODULE_FIRMWARE directives. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: tune rc_stats to display only valid ratesRajkumar Manoharan1-2/+3
This could make rc_stats more simpler and ease the debugging. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Trim rate tableSujith Manoharan2-180/+174
Remove ctrl_rate, cw40index, sgi_index, ht_index and calculate the rate index for TX status from the valid_rate_index that is populated at initialization time. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Remove MIMO-PS specific codeSujith Manoharan1-9/+0
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup TX status APISujith Manoharan1-42/+29
Calculate the final rate index inside ath_rc_tx_status(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Bail out properly before calculating rate indexSujith Manoharan1-13/+11
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Fix RTS/CTS rate selectionSujith Manoharan1-27/+14
The current method of assigning the RTS/CTS rate is completely broken for HT mode and breaks P2P operation. Fix this by using the basic_rates provided to the driver by mac80211. For now, choose the lowest supported basic rate for HT frames. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Do not set IEEE80211_TX_RC_USE_SHORT_PREAMBLESujith Manoharan1-2/+0
mac80211 does it for us. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Unify valid rate calculation routinesSujith Manoharan1-35/+39
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Remove ath_rc_set_valid_rate_idxSujith Manoharan1-10/+3
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Change rateset calculationSujith Manoharan1-26/+9
Commit "ath9k: Change rate control to use legacy rate as last MRR" resulted in the mixing of HT/legacy rates in a single rateset, which is undesirable. Revert this behavior. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup index retrieval routinesSujith Manoharan1-29/+27
Trim API and remove unused variables. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup ath_rc_setvalid_htratesSujith Manoharan1-8/+9
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup ath_rc_setvalid_ratesSujith Manoharan1-28/+21
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup RC init APISujith Manoharan1-64/+35
A reference to the rate table is stored inside the private structure, so there is no need to pass "rate_table" around. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Simplify rate table initializationSujith Manoharan1-48/+17
Remove various local variables that duplicate information already stored in mac80211. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: use GFP_ATOMIC under spin lockDan Carpenter1-1/+1
We're holding the sta_list_spinlock here so we can't sleep. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: notify cfg80211 about MIC failuresAmitkumar Karwar1-0/+6
Call cfg80211_michael_mic_failure() handler when there is a MIC error event from firmware. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: fix 'smatch' warning in preparing key_material cmdBing Zhao1-1/+1
The key length can be 32 bytes for TKIP and 16 bytes for AES_CMAC. 'smatch' warns on memcpy using key_len variable to copy data to a 16 bytes buffer. Use fixed length to avoid the warning. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ssb: check for flash presentenceRafał Miłecki2-8/+24
We can not assume parallel flash is always present, there are boards with *serial* flash and probably some without flash at all. Define some bits by the way. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10b43legacy: fix logic in GPIO initRafał Miłecki1-1/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10b43: N-PHY: fix 0x2057 radio calib copy/paste mistakeRafał Miłecki1-0/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10bcma: add (mostly) NAND definesRafał Miłecki2-0/+87
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: fix powerpc64-linux- compilation warningsBing Zhao2-9/+9
These warnings can be detected by using powerpc64-linux toolchain (gcc-4.6.3-nolibc). CC [M] drivers/net/wireless/mwifiex/sta_event.o drivers/net/wireless/mwifiex/sta_event.c: In function 'mwifiex_process_sta_event': drivers/net/wireless/mwifiex/sta_event.c:388:4: warning: comparison of distinct pointer types lacks a cast [enabled by default] CC [M] drivers/net/wireless/mwifiex/uap_event.o drivers/net/wireless/mwifiex/uap_event.c: In function 'mwifiex_process_uap_event': drivers/net/wireless/mwifiex/uap_event.c:258:11: warning: comparison of distinct pointer types lacks a cast [enabled by default] Use min_t() instead of min() to fix the warnings. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10iwlegacy: clean up suspend/resumeJohannes Berg2-14/+3
There's no need to export the il_pci_suspend and il_pci_resume functions since they're only referenced from il_pm_ops. The latter can also be defined using SIMPLE_DEV_PM_OPS instead of open-coding it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: fix code mis-alignment after the if statementFengguang Wu1-2/+2
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath5k: Put power_level where it belongs and rename itNick Kossifidis4-8/+17
Put power_level to ah_txpower struct with the rest tx power infos and also rename it to txp_requested to make more sense. v2 make sure we don't memset it to zero on reset Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath5k: Preserve tx power level requested from above on phy_initNick Kossifidis1-2/+2
By using cur_pwr on phy_init we re-use the power level previously set by the driver, not the one we got from above. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath5k: Fix range scaling when setting rate power tableNick Kossifidis1-3/+7
rates[i] is unsigned but txp_offset can be negative for newer parts with PDADC table. We cover the case when rates[i] + txp_offset > 63 but we must also cover the case when its < 0 or else rates[i] will overflow. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath5k: Use correct value for min_pwr and cur_pwrNick Kossifidis1-5/+14
Make sure we don't store the table offsets for min and cur power levels, store the 0.25dB values instead. This way we don't clamp the tx power level to max (because now cur_pwr holds the 0.25dB value, not the table offset) after re-using cur_pwr on reset. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10bcma: make some functions staticHauke Mehrtens3-8/+9
The functions and structs are not used in an other file and the prototypes are in no header file, just make them static so the compiler is able to optimize them better. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10p54: parse output power tableChristian Lamparter2-24/+92
For the upcoming tpc changes, the driver needs to provide sensible max output values for each supported channel. And while the eeprom always had a output_limit table, which defines the upper limit for each frequency and modulation, it was never really useful for anything... until now. Note: For anyone wondering about what your card is calibrated for: check "iw list". * 2412 MHz [1] (18.0 dBm) * 2437 MHz [6] (19.0 dBm) [...] * 5180 MHz [36] (18.0 dBm) * 5260 MHz [52] (17.0 dBm) (radar detection) * 5680 MHz [136] (19.0 dBm) (radar detection) (for a Dell Wireless 1450 USB Adapter) Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10Merge branch 'master' of ↵John W. Linville29-197/+415
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2012-08-06mwifiex: add AES_CMAC support in key_material cmdYing Luo2-10/+52
The sequence counter will be sent to firmware via key_material command. Signed-off-by: Ying Luo <luoy@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: pass key_params pointer in mwifiex_set_encodeYing Luo4-12/+22
'cipher' and 'seq' coming from cfg80211 add_key handler will be parsed in mwifiex_set_encode() to handle AES_CMAC cipher suite. Signed-off-by: Ying Luo <luoy@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: rename wapi_rxpn to pnYing Luo2-3/+3
This array was used for wapi_rxpn only. Now it will be used for AES_CMAC as well. So make a generic name for it. Signed-off-by: Ying Luo <luoy@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: cleanup TX/RX BA tables for uAPAvinash Patil5-0/+58
Cleanup TX/RX BA tables when AP receives deauthentication from associated station. During BSS_IDLE event, all wmm queues, BA streams created for AP interface are deleted. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: add 11n Block Ack support for uAPAvinash Patil6-9/+105
This patch adds support for handling BA request and BA setup events for AP interface. RA list is marked as either 11n enabled or disabled from station's capabilities in association request. BA setup is initiated only after some specific number of packets for particular RA list are transmitted. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: support RX AMSDU aggregation for uAPAvinash Patil4-9/+88
This patch adds support for reception and decoding of AMSDU aggregation frames for AP interface. Patch also adds support for handling AMSDU aggregation event. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: improve uAP RX handlingAvinash Patil6-0/+244
1. Separate file for uAP RX handling. 2. If received packet is broadcast/multicast, send it to kernel as well as requeue it back to uAP TX queue. 3. If received packet is for associated STA (intra-BSS), requeue it back to uAP TX queue. 4. In all other cases (packets for AP or inter-BSS packets), pass packet to kernel to handle it accordingly. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-10 03:07:54 +0300