summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-01-11rtc: Add Epson RX8010SJ RTC driverAkshay Bhat3-0/+534
This driver supports the following functions: - reading and setting time - alarms when connected to an IRQ - reading and clearing the voltage low flags Datasheet: http://www.epsondevice.com/docs/qd/en/DownloadServlet?id=ID000956 Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: lpc32xx: remove irq > NR_IRQS check from probe()Vladimir Zapolskiy1-1/+1
If the driver is used on an ARM platform with SPARSE_IRQ defined, semantics of NR_IRQS is different (minimal value of virtual irqs) and by default it is set to 16, see arch/arm/include/asm/irq.h. This value may be less than the actual number of virtual irqs, which may break the driver initialization. The check removal allows to use the driver on such a platform, and, if irq controller driver works correctly, the check is not needed on legacy platforms. Fixes a runtime problem: rtc-lpc32xx 40024000.rtc: Can't get interrupt resource Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: imxdi: fix spelling mistake in warning messageColin Ian King1-1/+1
Minor issue, fix spelling mistake, happend -> happened Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: ds1685: don't try to micromanage sysfs output sizeRasmus Villemoes1-7/+5
...and don't do it wrong. "not ok or N/A" has length 13. Add the trailing newline, and the snprintf return value will be 14. However, we lied to snprintf and told it that only 13 bytes were available. Hence snprintf has only written "not ok or N/" and a trailing '\0' to the buffer. Next we continue lying, this time to the upper sysfs layer, claiming that we wrote 14 meaningful bytes to the buffer. That'll make the upper layer copy "not ok or N/" plus two nul bytes to user space (one nul byte from snprintf, the other since sysfs takes care to clear the buffer before giving it to the ->show method). In the other cases, the claimed buffer size is closer to sufficient, but we'll still get a nul byte instead of a newline written to user space. There's absolutely no reason to try to predict the output size, and there's plenty of room in the buffer, so just use sprintf. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: use %ph for short hex dumpsRasmus Villemoes3-26/+11
This makes the generated code slightly smaller. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: da9063: avoid writing undefined data to rtcEnrico Scholz1-17/+6
driver did | static void da9063_tm_to_data(struct rtc_time *tm, u8 *data, | { | const struct da9063_compatible_rtc_regmap *config = rtc->config; | | data[RTC_SEC] &= ~config->rtc_count_sec_mask; | data[RTC_SEC] |= tm->tm_sec & config->rtc_count_sec_mask; | ... | } | ... | static int da9063_rtc_set_time(struct device *dev, struct rtc_time *tm) | { | ... | u8 data[RTC_DATA_LEN]; | int ret; | | da9063_tm_to_data(tm, data, rtc); which means that some bits of stack content (in 'data[]') was masked out and written to the RTC. Because da9063_tm_to_data() is used only by da9063_rtc_set_time() and da9063_rtc_set_alarm(), we can write fields directly. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: sunxi: use of_device_get_match_dataLABBE Corentin1-4/+2
The usage of of_device_get_match_data reduce the code size a bit. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: sunxi: constify the data_year_param structureLABBE Corentin1-3/+3
The data_year_param struct is never modified, so lets constify it. This permit to remove cast since of_device_id is const also. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: sunxi: fix signedness issuesLABBE Corentin1-4/+4
The variable year must be set as unsigned since it is used with sunxi_rtc_data_year{.min|.max} and as parameter of is_leap_year() which wait for unsigned int. Only tm_year is not unsigned, but it is long. This patch fix also the format of printing of min/max. (must use %u since they are unsigned) The parameter to of sunxi_rtc_setaie() must be set to uint since callers give always uint data. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: gemini: Remove unnecessary platform_set_drvdata()Nizam Haider1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure Signed-off-by: Nizam Haider <nijamh@cdac.in> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: efi: add efi_procfs in efi_rtc_opsGeliang Tang1-4/+62
Add efi_procfs in efi_rtc_ops to show rtc-efi info in /proc/driver/rtc. Most of the code comes from efi_rtc_proc_show() in efirtc. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: fix module reference count in rtc-procGeliang Tang1-3/+5
rtc-proc.c is not built as a module. Thus, rather than dealing with THIS_MODULE's reference count, we should deal with rtc->owner's reference count. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: pcf8523: refuse to write dates later than 2099Uwe Kleine-König1-0/+11
When the chip increments the YEAR register and it already holds bin2bcd(99) it reads as 0 afterwards. With this behaviour the last valid day (without trickery) that has a representation is 2099-12-31 23:59:59. So refuse to write later dates. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11Merge tag 'ib-mfd-regulator-rtc-v4.5' into rtc-nextAlexandre Belloni8-7/+369
Immutable branch between MFD, Regulator and RTC for the v4.5 merge window
2016-01-11Linux 4.4Linus Torvalds1-1/+1
2016-01-10Merge tag 'scsi-fixes' of ↵Linus Torvalds1-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix for machines with pages > 4k (PPC mostly). There's a bug in our optimal transfer size code where we don't account for pages > 4k and can set the transfer size to be less than the page size causing nasty failures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Reject optimal transfer length smaller than page size
2016-01-10Merge tag 'pci-v4.4-fixes-4' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixlet from Bjorn Helgaas: "This marks the TI DRA7xx host bridge driver as broken. Apparently it has never worked without some additional out-of-tree code, so I'm going to mark it broken now and remove it completely next cycle unless it's fixed" * tag 'pci-v4.4-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dra7xx: Mark driver as broken
2016-01-09vmstat: allocate vmstat_wq before it is usedMichal Hocko1-1/+1
kernel test robot has reported the following crash: BUG: unable to handle kernel NULL pointer dereference at 00000100 IP: [<c1074df6>] __queue_work+0x26/0x390 *pdpt = 0000000000000000 *pde = f000ff53f000ff53 *pde = f000ff53f000ff53 Oops: 0000 [#1] PREEMPT PREEMPT SMP SMP CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.4.0-rc4-00139-g373ccbe #1 Workqueue: events vmstat_shepherd task: cb684600 ti: cb7ba000 task.ti: cb7ba000 EIP: 0060:[<c1074df6>] EFLAGS: 00010046 CPU: 0 EIP is at __queue_work+0x26/0x390 EAX: 00000046 EBX: cbb37800 ECX: cbb37800 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: cb7bbe68 ESP: cb7bbe38 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000100 CR3: 01fd5000 CR4: 000006b0 Stack: Call Trace: __queue_delayed_work+0xa1/0x160 queue_delayed_work_on+0x36/0x60 vmstat_shepherd+0xad/0xf0 process_one_work+0x1aa/0x4c0 worker_thread+0x41/0x440 kthread+0xb0/0xd0 ret_from_kernel_thread+0x21/0x40 The reason is that start_shepherd_timer schedules the shepherd work item which uses vmstat_wq (vmstat_shepherd) before setup_vmstat allocates that workqueue so if the further initialization takes more than HZ we might end up scheduling on a NULL vmstat_wq. This is really unlikely but not impossible. Fixes: 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress") Reported-by: kernel test robot <ying.huang@linux.intel.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-09Merge tag 'fixes-for-linus' of ↵Linus Torvalds7-12/+49
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "This is the final small set of ARM SoC bug fixes for linux-4.4, almost all regressions: OMAP: - data corruption on the Nokia N900 flash Allwinner: - Two defconfig change to get USB working again ARM Versatile: - Interrupt numbers gone bad after an older bug fix Nomadik: - Crashes from incorrect L2 cache settings VIA vt8500: - SD/MMC support on WM8650 never worked" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: dts: vt8500: Add SDHC node to DTS file for WM8650 ARM: Fix broken USB support in multi_v7_defconfig for sunxi devices ARM: versatile: fix MMC/SD interrupt assignment ARM: nomadik: set latencies to 8 cycles ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption ARM: Fix broken USB support in sunxi_defconfig
2016-01-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-1/+3
Pull KVM fix from Paolo Bonzini: "A simple fix. I'm sending it before the merge window, because it refines a patch found in your master branch but not yet in the kvm/next branch that is destined for 4.5" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: only channel 0 of the i8254 is linked to the HPET
2016-01-09Merge tag 'pm+acpi-4.4-final' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Just one obvious fix that adds a missing function argument in ACPI code introduced recently (Kees Cook)" * tag 'pm+acpi-4.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / property: avoid leaking format string into kobject name
2016-01-09Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds13-32/+96
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A handful of x86 fixes: - a syscall ABI fix, fixing an Android breakage - a Xen PV guest fix relating to the RTC device, causing a non-working console - a Xen guest syscall stack frame fix - an MCE hotplug CPU crash fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/numachip: Fix NumaConnect2 MMCFG PCI access x86/entry: Restore traditional SYSENTER calling convention x86/entry: Fix some comments x86/paravirt: Prevent rtc_cmos platform device init on PV guests x86/xen: Avoid fast syscall path for Xen PV guests x86/mce: Ensure offline CPUs don't participate in rendezvous process
2016-01-09Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds3-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc scheduler fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Reset task's lockless wake-queues on fork() sched/core: Fix unserialized r-m-w scribbling stuff sched/core: Check tgid in is_global_init() sched/fair: Fix multiplication overflow on 32-bit systems
2016-01-09Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds5-32/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two core subsystem fixes, plus a handful of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix race in swevent hash perf: Fix race in perf_event_exec() perf list: Robustify event printing routine perf list: Add support for PERF_COUNT_SW_BPF_OUT perf hists browser: Fix segfault if use symbol filter in cmdline perf hists browser: Reset selection when refresh perf hists browser: Add NULL pointer check to prevent crash perf buildid-list: Fix return value of perf buildid-list -k perf buildid-list: Show running kernel build id fix
2016-01-09Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "Fixes a core IRQ subsystem deadlock" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Prevent chip buslock deadlock
2016-01-09Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block revert from Jens Axboe: "The previous pull request had a split fix for NVMe, however there are corner cases where that ends up blowing up. So let's revert it for 4.4. The regression isn't introduced in this cycle, and it's "just" a performance regression, not a stability/integrity issue" * 'for-linus' of git://git.kernel.dk/linux-block: Revert "block: Split bios on chunk boundaries"
2016-01-08Merge tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds6-17/+16
Pull dmaengine fixes from Vinod Koul: "Late fixes for 4.4 are three fixes for drivers which include a revert of mic-x100 fix which is causing regression, xgene fix for double IRQ and async_tx fix to use GFP_NOWAIT" * tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: xgene-dma: Fix double IRQ issue by setting IRQ_DISABLE_UNLAZY flag async_tx: use GFP_NOWAIT rather than GFP_IO dmaengine: Revert "dmaengine: mic_x100: add missing spin_unlock"
2016-01-08Merge branch 'dmi-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi fix from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi_scan: Fix UUID endianness for SMBIOS >= 2.6
2016-01-08Merge tag 'sound-4.4' of ↵Linus Torvalds8-18/+104
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A slightly higher volume than a new year's wish, but not too worrisome: a large LOC is only for HD-audio device-specific quirks, so fairly safe to apply. The rest ASoC fixes are all trivial and small; a simple replacement of mutex call with nested lock version, a few Arizona and Realtek codec fixes, and a regression fix for Skylake firmware handling" * tag 'sound-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: Intel: Skylake: Fix the memory leak ASoC: Intel: Skylake: Revert previous broken fix memory leak fix ASoC: Use nested lock for snd_soc_dapm_mutex_lock ASoC: rt5645: add sys clk detection ALSA: hda - Add keycode map for alc input device ALSA: hda - Add mic mute hotkey quirk for Lenovo ThinkCentre AIO ASoC: arizona: Fix bclk for sample rates that are multiple of 4kHz
2016-01-08Merge tag 'omap-for-v4.4/onenand-corruption' of ↵Arnd Bergmann1-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Pull "urgent onenand file system corruption fix for n900" from Tony Lindgren: Last minute urgent pull request to prevent file system corruption on Nokia N900. Looks like we have a GPMC bus timing bug that has gone unnoticed because of bootloader configured registers until few days ago. We are not detecting the onenand clock rate properly unless we have CONFIG_OMAP_GPMC_DEBUG set and this causes onenand corruption that can be easily be reproduced. There seems to be also an additional bug still lurking around for onenand corruption. But that is still being investigated and it does not seem to be GPMC timings related. Meanwhile, it would be good to get this fix into v4.4 to prevent wrong timings from corrupting onenand. * tag 'omap-for-v4.4/onenand-corruption' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption
2016-01-08Revert "block: Split bios on chunk boundaries"Jens Axboe1-1/+1
This reverts commit d3805611130af9b911e908af9f67a3f64f4f0914. If we end up splitting on the first segment, we don't adjust the sector count. That results in hitting a BUG() with attempting to split 0 sectors. As this is just a performance issue and not a regression since 4.3 release, let's just rever this change. That gives us more time to test a real fix for 4.5, which would be marked for stable anyway.
2016-01-08PCI: dra7xx: Mark driver as brokenRichard Cochran1-0/+1
Mark the dra7xx PCI host driver as broken. This driver was first merged in v3.17 and has never worked. Although the driver compiles just fine, it is missing an essential device reset. If the driver is included, the kernel locks up hard shortly after booting, before any console output appears. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-08firmware: dmi_scan: Fix UUID endianness for SMBIOS >= 2.6Andrea Arcangeli1-3/+3
The dmi_ver wasn't updated correctly before the dmi_decode method run to save the uuid. That resulted in "dmidecode -s system-uuid" and /sys/class/dmi/id/product_uuid disagreeing. The latter was buggy and this fixes it. Reported-by: Federico Simoncelli <fsimonce@redhat.com> Fixes: 9f9c9cbb6057 ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") Fixes: 79bae42d51a5 ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2016-01-08ACPI / property: avoid leaking format string into kobject nameKees Cook1-1/+1
The dn->name is expected to be used as a literal, so add the missing "%s". Fixes: 263b4c1a64bc (ACPI / property: Expose data-only subnodes via sysfs) Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-08Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-0/+1
Pull drm nouveau fix from Dave Airlie: "Still not back to work, but I decided to forward this fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/gr/nv40: fix oops in interrupt handler
2016-01-07Merge tag 'iommu-fixes-v4.4-rc8' of ↵Linus Torvalds2-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Two build issues, one in the ipmmu-vmsa driver and one for the new generic dma-api implemention used on arm64 - A performance fix for said dma-api implemention - An issue caused by a wrong offset in map_sg in the same code as above * tag 'iommu-fixes-v4.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dma: Use correct offset in map_sg iommu/ipmmu-vmsa: Don't truncate ttbr if LPAE is not enabled iommu/dma: Avoid unlikely high-order allocations iommu/dma: Add some missing #includes
2016-01-07Merge tag 'trace-v4.4-rc4-4' of ↵Linus Torvalds2-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fix from Steven Rostedt: "PeiyangX Qiu reported that if a module fails to load between calling ftrace_module_init() and do_init_module() that the allocations made in ftrace_module_init() will not be freed, resulting in a memory leak. The solution is to call ftrace_release_mod() on the failing module in the fail path befor do_init_module() is called. This will remove any allocations made for that module, and nothing if ftrace_module_init() wasn't called yet for that module. Note, once do_init_module() is called, the MODULE_GOING notifiers are called for the failed module, which calls into the ftrace code to do the proper clean up (basically calling ftrace_release_mod())" * tag 'trace-v4.4-rc4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/module: Call clean up function when module init fails early
2016-01-07ftrace/module: Call clean up function when module init fails earlySteven Rostedt (Red Hat)2-0/+7
If the module init code fails after calling ftrace_module_init() and before calling do_init_module(), we can suffer from a memory leak. This is because ftrace_module_init() allocates pages to store the locations that ftrace hooks are placed in the module text. If do_init_module() fails, it still calls the MODULE_GOING notifiers which will tell ftrace to do a clean up of the pages it allocated for the module. But if load_module() fails before then, the pages allocated by ftrace_module_init() will never be freed. Call ftrace_release_mod() on the module if load_module() fails before getting to do_init_module(). Link: http://lkml.kernel.org/r/567CEA31.1070507@intel.com Reported-by: "Qiu, PeiyangX" <peiyangx.qiu@intel.com> Fixes: a949ae560a511 "ftrace/module: Hardcode ftrace_module_init() call into load_module()" Cc: stable@vger.kernel.org # v2.6.38+ Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-01-07dts: vt8500: Add SDHC node to DTS file for WM8650Roman Volkov1-0/+9
Since WM8650 has the same 'WMT' SDHC controller as WM8505, and the driver is already in the kernel, this node enables the controller support for WM8650 Signed-off-by: Roman Volkov <rvolkov@v1ros.org> Reviewed-by: Alexey Charkov <alchark@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-07ARM: Fix broken USB support in multi_v7_defconfig for sunxi devicesTimo Sigurdsson1-0/+1
Commit 69fb4dcada77 ("power: Add an axp20x-usb-power driver") introduced a new driver for the USB power supply used on various Allwinner based SBCs. However, the driver was not added to multi_v7_defconfig which breaks USB support for some boards (e.g. LeMaker BananaPi) as the kernel will now turn off the USB power supply during boot by default if the driver isn't present. (This was not the case in linux 4.3 or lower where the USB power was always left on.) Hence, add the driver to multi_v7_defconfig in order to keep USB support working on those boards that require it. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Tested-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-07kvm: x86: only channel 0 of the i8254 is linked to the HPETPaolo Bonzini2-1/+3
While setting the KVM PIT counters in 'kvm_pit_load_count', if 'hpet_legacy_start' is set, the function disables the timer on channel[0], instead of the respective index 'channel'. This is because channels 1-3 are not linked to the HPET. Fix the caller to only activate the special HPET processing for channel 0. Reported-by: P J P <pjp@fedoraproject.org> Fixes: 0185604c2d82c560dab2f2933a18f797e74ab5a8 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-07iommu/dma: Use correct offset in map_sgRobin Murphy1-1/+1
When mapping a non-page-aligned scatterlist entry, we copy the original offset to the output DMA address before aligning it to hand off to iommu_map_sg(), then later adding the IOVA page address portion to get the final mapped address. However, when the IOVA page size is smaller than the CPU page size, it is the offset within the IOVA page we want, not that within the CPU page, which can easily be larger than an IOVA page and thus result in an incorrect final address. Fix the bug by taking only the IOVA-aligned part of the offset as the basis of the DMA address, not the whole thing. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-07Merge branch 'linux-4.4' of git://github.com/skeggsb/linux into drm-fixesDave Airlie1-0/+1
single nv40 oops fix. * 'linux-4.4' of git://github.com/skeggsb/linux: drm/nouveau/gr/nv40: fix oops in interrupt handler
2016-01-07dmaengine: xgene-dma: Fix double IRQ issue by setting IRQ_DISABLE_UNLAZY flagRameshwar Prasad Sahu1-0/+4
For interrupt controller that doesn't support irq_disable and hardware with level interrupt, an extra interrupt can be pending. This patch fixes the issue by setting IRQ_DISABLE_UNLAZY flag for the interrupt line. Reference: http://git.kernel.org/tip/e9849777d0e27cdd2902805be51da73e7c79578c Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-07async_tx: use GFP_NOWAIT rather than GFP_IONeilBrown4-7/+7
These async_XX functions are called from md/raid5 in an atomic section, between get_cpu() and put_cpu(), so they must not sleep. So use GFP_NOWAIT rather than GFP_IO. Dan Williams writes: Longer term async_tx needs to be merged into md directly as we can allocate this unmap data statically per-stripe rather than per request. Fixed: 7476bd79fc01 ("async_pq: convert to dmaengine_unmap_data") Cc: stable@vger.kernel.org (v3.13+) Reported-and-tested-by: Stanislav Samsonov <slava@annapurnalabs.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-07ARM: versatile: fix MMC/SD interrupt assignmentLinus Walleij2-4/+26
Commit 0976c946a610d06e907335b7a3afa6db046f8e1b "arm/versatile: Fix versatile irq specifications" has an off-by-one error on the Versatile AB that has been regressing the Versatile AB hardware for some time. However it seems like the interrupt assignments have never been correct and I have now adjusted them according to the specification. The masks for the valid interrupts made it impossible to assign the right SIC interrupt for the MMCI, so I went in and fixed these to correspond to the specifications, and added references if anyone wants to double-check. Due to the Versatile PB including the Versatile AB as a base DTS file, we need to override and correct some values to correspond to the actual changes in the hardware. For the Versatile PB I don't think the IRQ line assignment for MMCI has ever been correct for either of the two MMCI blocks. It would be nice if someone with the physical PB board could test this. Patch tested on the Versatile AB, QEMU for Versatile AB and QEMU for Versatile PB. Cc: Rob Herring <robh@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: stable@vger.kernel.org Fixes: 0976c946a610 ("arm/versatile: Fix versatile irq specifications") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-01-07ARM: nomadik: set latencies to 8 cyclesLinus Walleij1-3/+3
The Nomadik has sporadic crashes because of these latencies, setting them to max makes the platform work nicely, so use this values for now. These latencies were set to 2 since the Nomadik platform was merged, but I suspect they never took effect until the right size and associativity for the cache was specified in the device tree and that is why the crash comes now. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-01-07Merge tag 'for-linus-20160106' of git://git.infradead.org/linux-mtdLinus Torvalds3-16/+22
Pull MTD fixes from Brian Norris: "Three last MTD fixes for v4.4. These are all fixes for regressions and bugs reported mid cycle. Unfortunately, some of them took a bit long to get proper testing and feedback. - Assign the default MTD name earlier in the registration process, so partition parsers (like cmdlinepart) see the right name. Without this, some systems may come up with unpartitioned flash. This was a v4.4-rc1 regression. - Revert some new Winbond SPI NOR flash unlocking/locking support; new code in v4.4 caused regressions on some Spansion flash. - Fix mis-typed parameter ordering in SPI NOR unlock function; this bug was introduced in v4.4-rc1" * tag 'for-linus-20160106' of git://git.infradead.org/linux-mtd: mtd: spi-nor: fix stm_is_locked_sr() parameters mtd: spi-nor: fix Spansion regressions (aliased with Winbond) mtd: fix cmdlinepart parser, early naming for auto-filled MTD
2016-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds24-117/+150
Pull networking fixes from David Miller: "As usual, there are a couple straggler bug fixes: 1) qlcnic_alloc_mbx_args() error returns are not checked in qlcnic driver. Fix from Insu Yun. 2) SKB refcounting bug in connector, from Florian Westphal. 3) vrf_get_saddr() has to propagate fib_lookup() errors to it's callers, from David Ahern. 4) Fix AF_UNIX splice/bind deadlock, from Rainer Weikusat. 5) qdisc_rcu_free() fails to free the per-cpu qstats. Fix from John Fastabend. 6) vmxnet3 driver passes wrong page to dma_map_page(), fix from Shrikrishna Khare. 7) Don't allow zero cwnd in tcp_cwnd_reduction(), from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tcp: fix zero cwnd in tcp_cwnd_reduction Driver: Vmxnet3: Fix regression caused by 5738a09 net: qmi_wwan: Add WeTelecom-WPD600N mkiss: fix scribble on freed memory net: possible use after free in dst_release net: sched: fix missing free per cpu on qstats ARM: net: bpf: fix zero right shift 6pack: fix free memory scribbles net: filter: make JITs zero A for SKF_AD_ALU_XOR_X bridge: Only call /sbin/bridge-stp for the initial network namespace af_unix: Fix splice-bind deadlock net: Propagate lookup failure in l3mdev_get_saddr to caller r8152: add reset_resume function connector: bump skb->users before callback invocation cxgb4: correctly handling failed allocation qlcnic: correctly handle qlcnic_alloc_mbx_args
2016-01-07tcp: fix zero cwnd in tcp_cwnd_reductionYuchung Cheng1-0/+3
Patch 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally") introduced a bug that cwnd may become 0 when both inflight and sndcnt are 0 (cwnd = inflight + sndcnt). This may lead to a div-by-zero if the connection starts another cwnd reduction phase by setting tp->prior_cwnd to the current cwnd (0) in tcp_init_cwnd_reduction(). To prevent this we skip PRR operation when nothing is acked or sacked. Then cwnd must be positive in all cases as long as ssthresh is positive: 1) The proportional reduction mode inflight > ssthresh > 0 2) The reduction bound mode a) inflight == ssthresh > 0 b) inflight < ssthresh sndcnt > 0 since newly_acked_sacked > 0 and inflight < ssthresh Therefore in all cases inflight and sndcnt can not both be 0. We check invalid tp->prior_cwnd to avoid potential div0 bugs. In reality this bug is triggered only with a sequence of less common events. For example, the connection is terminating an ECN-triggered cwnd reduction with an inflight 0, then it receives reordered/old ACKs or DSACKs from prior transmission (which acks nothing). Or the connection is in fast recovery stage that marks everything lost, but fails to retransmit due to local issues, then receives data packets from other end which acks nothing. Fixes: 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 14:43:21 +0300