| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The macro was always used together with can_dlc2len() which sanitizes the
given dlc value on its own.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201110101852.1973-4-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The get_can_dlc() macro is used to ensure the payload length information of
the Classical CAN frame to be max 8 bytes (the CAN_MAX_DLEN).
Rename the macro and use the correct constant in preparation of the len/dlc
cleanup for Classical CAN frames.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201110101852.1973-3-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
ISO 11898-1 Chapter 8.4.2.3 defines a 4 bit data length code (DLC) table which
maps the DLC to the payload length of the CAN frame in bytes:
DLC -> payload length
0 .. 8 -> 0 .. 8
9 .. 15 -> 8
Although the DLC values 8 .. 15 in Classical CAN always result in a payload
length of 8 bytes these DLC values are transparently transmitted on the CAN
bus. As the struct can_frame only provides a 'len' element (formerly 'can_dlc')
which contains the plain payload length ( 0 .. 8 ) of the CAN frame, the raw
DLC is not visible to the application programmer, e.g. for testing use-cases.
To access the raw DLC values 9 .. 15 the len8_dlc element is introduced, which
is only valid when the payload length 'len' is 8 and the DLC is greater than 8.
The len8_dlc element is filled by the CAN interface driver and used for CAN
frame creation by the CAN driver when the CAN_CTRLMODE_CC_LEN8_DLC flag is
supported by the driver and enabled via netlink configuration interface.
Reported-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201110101852.1973-2-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use table markup to show the structure of the CAN identifier, PGN, PDU1, and
PDU2 formats. Also add introductory sentence.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20201104155730.25196-1-yegorslists@googlemail.com
[mkl: removed trailing whitespace]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Claudiu Manoil says:
====================
enetc: Clean endianness warnings up
Cleanup patches to address the outstanding endianness issues
in the driver reported by sparse.
====================
Link: https://lore.kernel.org/r/20201119101215.19223-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the control buffer descriptor (cbd) fields have endianness
restrictions while the commands passed into the control buffers
don't (with one exception). This patch fixes offending code,
by adding endianness accessors for cbd fields and removing the
unnecessary ones in case of data buffer fields. Currently there's
no need to convert all commands to little endian format, the patch
only focuses on fixing current endianness issues reported by sparse.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These particular fields are specified in the H/W reference
manual as having network byte order format, so enforce big
endian annotation for them and clear the related sparse
warnings in the process.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds an IPv6 routes encapsulation attribute
to the result of netlink RTM_GETROUTE requests
(i.e. ip route get 2001:db8::).
Signed-off-by: Oliver Herms <oliver.peter.herms@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201118230651.GA8861@tws
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We must start the retransmission timer only there are
pending data in the rtx queue.
Otherwise we can hit a WARN_ON in mptcp_reset_timer(),
as syzbot demonstrated.
Reported-and-tested-by: syzbot+42aa53dafb66a07e5a24@syzkaller.appspotmail.com
Fixes: d9ca1de8c0cd ("mptcp: move page frag allocation in mptcp_sendmsg()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/1a72039f112cae048c44d398ffa14e0a1432db3d.1605737083.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jacob Keller says:
====================
devlink: move common flash_update calls to core
This series moves a couple common pieces done by all drivers of the
->flash_update interface into devlink.c flash update handler. Specifically,
the core code will now request_firmware and
devlink_flash_update_(begin|end)_notify.
This cleanup is intended to simplify driver implementations so that they
have less work to do and are less capable of doing the "wrong" thing.
For request_firmware, this simplification is done as it is not expected that
drivers would do anything else. It also standardizes all drivers so that
they use the same interface (request_firmware, as opposed to
request_firmware_direct), and allows reporting the netlink extended ack with
the file name attribute.
For status notification, this change prevents drivers from sending a status
message without properly sending the status end notification. The current
userspace implementation of devlink relies on this end notification to
properly close the flash update channel. Without this, the flash update
process may hang indefinitely. By moving the begin and end calls into the
core code, it is no longer possible for a driver author to get this wrong.
Changes since v3
* picked up acked-by and reviewed-by comments
* fixed the ionic driver to leave the print statement in place
For the original patch that moved request_firmware, see [1]. For the v2 see
[2]. For further discussion of the issues with devlink flash status see [3].
For v3 see [4].
[1] https://lore.kernel.org/netdev/20201113000142.3563690-1-jacob.e.keller@intel.com/
[2] https://lore.kernel.org/netdev/20201113224559.3910864-1-jacob.e.keller@intel.com/
[3] https://lore.kernel.org/netdev/6352e9d3-02af-721e-3a54-ef99a666be29@intel.com/
[4] https://lore.kernel.org/netdev/20201117200820.854115-1-jacob.e.keller@intel.com/
====================
Link: https://lore.kernel.org/r/20201118190636.1235045-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When performing a flash update via devlink, device drivers may inform
user space of status updates via
devlink_flash_update_(begin|end|timeout|status)_notify functions.
It is expected that drivers do not send any status notifications unless
they send a begin and end message. If a driver sends a status
notification without sending the appropriate end notification upon
finishing (regardless of success or failure), the current implementation
of the devlink userspace program can get stuck endlessly waiting for the
end notification that will never come.
The current ice driver implementation may send such a status message
without the appropriate end notification in rare cases.
Fixing the ice driver is relatively simple: we just need to send the
begin_notify at the start of the function and always send an end_notify
no matter how the function exits.
Rather than assuming driver authors will always get this right in the
future, lets just fix the API so that it is not possible to get wrong.
Make devlink_flash_update_begin_notify and
devlink_flash_update_end_notify static, and call them in devlink.c core
code. Always send the begin_notify just before calling the driver's
flash_update routine. Always send the end_notify just after the routine
returns regardless of success or failure.
Doing this makes the status notification easier to use from the driver,
as it no longer needs to worry about catching failures and cleaning up
by calling devlink_flash_update_end_notify. It is now no longer possible
to do the wrong thing in this regard. We also save a couple of lines of
code in each driver.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All drivers which implement the devlink flash update support, with the
exception of netdevsim, use either request_firmware or
request_firmware_direct to locate the firmware file. Rather than having
each driver do this separately as part of its .flash_update
implementation, perform the request_firmware within net/core/devlink.c
Replace the file_name parameter in the struct devlink_flash_update_params
with a pointer to the fw object.
Use request_firmware rather than request_firmware_direct. Although most
Linux distributions today do not have the fallback mechanism
implemented, only about half the drivers used the _direct request, as
compared to the generic request_firmware. In the event that
a distribution does support the fallback mechanism, the devlink flash
update ought to be able to use it to provide the firmware contents. For
distributions which do not support the fallback userspace mechanism,
there should be essentially no difference between request_firmware and
request_firmware_direct.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc5, including fixes from the WiFi
(mac80211), can and bpf (including the strncpy_from_user fix).
Current release - regressions:
- mac80211: fix memory leak of filtered powersave frames
- mac80211: free sta in sta_info_insert_finish() on errors to avoid
sleeping in atomic context
- netlabel: fix an uninitialized variable warning added in -rc4
Previous release - regressions:
- vsock: forward all packets to the host when no H2G is registered,
un-breaking AWS Nitro Enclaves
- net: Exempt multicast addresses from five-second neighbor lifetime
requirement, decreasing the chances neighbor tables fill up
- net/tls: fix corrupted data in recvmsg
- qed: fix ILT configuration of SRC block
- can: m_can: process interrupt only when not runtime suspended
Previous release - always broken:
- page_frag: Recover from memory pressure by not recycling pages
allocating from the reserves
- strncpy_from_user: Mask out bytes after NUL terminator
- ip_tunnels: Set tunnel option flag only when tunnel metadata is
present, always setting it confuses Open vSwitch
- bpf, sockmap:
- Fix partial copy_page_to_iter so progress can still be made
- Fix socket memory accounting and obeying SO_RCVBUF
- net: Have netpoll bring-up DSA management interface
- net: bridge: add missing counters to ndo_get_stats64 callback
- tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt
- enetc: Workaround MDIO register access HW bug
- net/ncsi: move netlink family registration to a subsystem init,
instead of tying it to driver probe
- net: ftgmac100: unregister NC-SI when removing driver to avoid
crash
- lan743x:
- prevent interrupt storm on open
- fix freeing skbs in the wrong context
- net/mlx5e: Fix socket refcount leak on kTLS RX resync
- net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097
- fix 21 unset return codes and other mistakes on error paths, mostly
detected by the Hulk Robot"
* tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (115 commits)
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid()
net/smc: fix matching of existing link groups
ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
libbpf: Fix VERSIONED_SYM_COUNT number parsing
net/mlx4_core: Fix init_hca fields offset
atm: nicstar: Unmap DMA on send error
page_frag: Recover from memory pressure
net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
mlxsw: core: Use variable timeout for EMAD retries
mlxsw: Fix firmware flashing
net: Have netpoll bring-up DSA management interface
atl1e: fix error return code in atl1e_probe()
atl1c: fix error return code in atl1c_probe()
ah6: fix error return code in ah6_input()
net: usb: qmi_wwan: Set DTR quirk for MR400
can: m_can: process interrupt only when not runtime suspended
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
...
|
|
Pull rdma fixes from Jason Gunthorpe:
"The last two weeks have been quiet here, just the usual smattering of
long standing bug fixes.
A collection of error case bug fixes:
- Improper nesting of spinlock types in cm
- Missing error codes and kfree()
- Ensure dma_virt_ops users have the right kconfig symbols to work
properly
- Compilation failure of tools/testing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
tools/testing/scatterlist: Fix test to compile and run
IB/hfi1: Fix error return code in hfi1_init_dd()
RMDA/sw: Don't allow drivers using dma_virt_ops on highmem configs
RDMA/pvrdma: Fix missing kfree() in pvrdma_register_device()
RDMA/cm: Make the local_id_table xarray non-irq
|
|
Alexei Starovoitov says:
====================
1) libbpf should not attempt to load unused subprogs, from Andrii.
2) Make strncpy_from_user() mask out bytes after NUL terminator, from Daniel.
3) Relax return code check for subprograms in the BPF verifier, from Dmitrii.
4) Fix several sockmap issues, from John.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
libbpf: Fix VERSIONED_SYM_COUNT number parsing
bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list
bpf, sockmap: Handle memory acct if skb_verdict prog redirects to self
bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self
bpf, sockmap: Use truesize with sk_rmem_schedule()
bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect
bpf, sockmap: Fix partial copy_page_to_iter so progress can still be made
selftests/bpf: Fix error return code in run_getsockopt_test()
bpf: Relax return code check for subprograms
tools, bpftool: Add missing close before bpftool net attach exit
MAINTAINERS/bpf: Update Andrii's entry.
selftests/bpf: Fix unused attribute usage in subprogs_unused test
bpf: Fix unsigned 'datasec_id' compared with zero in check_pseudo_btf_id
bpf: Fix passing zero to PTR_ERR() in bpf_btf_printf_prepare
libbpf: Don't attempt to load unused subprog as an entry-point BPF program
====================
Link: https://lore.kernel.org/r/20201119200721.288-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a mutex_unlock() issue where before copy_from_user() is
not called mutex_locked.
Fixes: 4b1a29a7f542 ("error-injection: Support fault injection framework")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/160570737118.263807.8358435412898356284.stgit@devnote2
|
|
Daniel Xu says:
====================
6ae08ae3dea2 ("bpf: Add probe_read_{user, kernel} and probe_read_{user,
kernel}_str helpers") introduced a subtle bug where
bpf_probe_read_user_str() would potentially copy a few extra bytes after
the NUL terminator.
This issue is particularly nefarious when strings are used as map keys,
as seemingly identical strings can occupy multiple entries in a map.
This patchset fixes the issue and introduces a selftest to prevent
future regressions.
v6 -> v7:
* Add comments
v5 -> v6:
* zero-pad up to sizeof(unsigned long) after NUL
v4 -> v5:
* don't read potentially uninitialized memory
v3 -> v4:
* directly pass userspace pointer to prog
* test more strings of different length
v2 -> v3:
* set pid filter before attaching prog in selftest
* use long instead of int as bpf_probe_read_user_str() retval
* style changes
v1 -> v2:
* add Fixes: tag
* add selftest
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Previously, bpf_probe_read_user_str() could potentially overcopy the
trailing bytes after the NUL due to how do_strncpy_from_user() does the
copy in long-sized strides. The issue has been fixed in the previous
commit.
This commit adds a selftest that ensures we don't regress
bpf_probe_read_user_str() again.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4d977508fab4ec5b7b574b85bdf8b398868b6ee9.1605642949.git.dxu@dxuuu.xyz
|
|
do_strncpy_from_user() may copy some extra bytes after the NUL
terminator into the destination buffer. This usually does not matter for
normal string operations. However, when BPF programs key BPF maps with
strings, this matters a lot.
A BPF program may read strings from user memory by calling the
bpf_probe_read_user_str() helper which eventually calls
do_strncpy_from_user(). The program can then key a map with the
destination buffer. BPF map keys are fixed-width and string-agnostic,
meaning that map keys are treated as a set of bytes.
The issue is when do_strncpy_from_user() overcopies bytes after the NUL
terminator, it can result in seemingly identical strings occupying
multiple slots in a BPF map. This behavior is subtle and totally
unexpected by the user.
This commit masks out the bytes following the NUL while preserving
long-sized stride in the fast path.
Fixes: 6ae08ae3dea2 ("bpf: Add probe_read_{user, kernel} and probe_read_{user, kernel}_str helpers")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/21efc982b3e9f2f7b0379eed642294caaa0c27a7.1605642949.git.dxu@dxuuu.xyz
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes for CVE-2020-4788.
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1
cache before it has been completely validated, via a way-prediction
mechanism. It is not possible for an attacker to determine the
contents of impermissible memory using this method, since these
systems implement a combination of hardware and software security
measures to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker
induces the operating system to speculatively execute instructions
using data that the attacker controls. This can be used for example to
speculatively bypass "kernel user access prevention" techniques, as
discovered by Anthony Steinhauser of Google's Safeside Project. This
is not an attack by itself, but there is a possibility it could be
used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and
after the kernel performs any user accesses (patch 3). It also adds a
self-test and performs some related cleanups"
* tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations
selftests/powerpc: refactor entry and rfi_flush tests
selftests/powerpc: entry flush test
powerpc: Only include kup-radix.h for 64-bit Book3S
powerpc/64s: flush L1D after user accesses
powerpc/64s: flush L1D on kernel entry
selftests/powerpc: rfi_flush: disable entry flush if present
|
|
Pull xtensa fixes from Max Filippov:
- fix placement of cache alias remapping area
- disable preemption around cache alias management calls
- add missing __user annotation to strncpy_from_user argument
* tag 'xtensa-20201119' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: uaccess: Add missing __user to strncpy_from_user() prototype
xtensa: disable preemption around cache alias management calls
xtensa: fix TLBTEMP area placement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix recent regression in the APEI code and initialization issue
in the ACPI fan driver.
Specifics:
- Make the APEI code avoid attempts to obtain logical addresses for
registers located in the I/O address space to fix initialization
issues (Aili Yao)
- Fix sysfs attribute initialization in the ACPI fan driver (Guenter
Roeck)"
* tag 'acpi-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI, APEI, Fix error return value in apei_map_generic_address()
ACPI: fan: Initialize performance state sysfs attribute
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in ARM cpufreq drivers and one cpuidle driver
issue.
Specifics:
- Add missing RCU_NONIDLE() annotations to the Tegra cpuidle driver
(Dmitry Osipenko)
- Fix boot frequency computation in the tegra186 cpufreq driver (Jon
Hunter)
- Make the SCMI cpufreq driver register a dummy clock provider to
avoid OPP addition failures (Sudeep Holla)"
* tag 'pm-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scmi: Fix OPP addition failure with a dummy clock provider
cpufreq: tegra186: Fix get frequency callback
cpuidle: tegra: Annotate tegra_pm_set_cpu_in_lp2() with RCU_NONIDLE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"This is a relatively large set of fixes, the bulk of it being a series
from Lukas Wunner which fixes confusion with the lifetime of driver
data allocated along with the SPI controller structure that's been
created as part of the conversion to devm APIs.
The simplest fix, explained in detail in Lukas' commit message, is to
move to a devm_ function for allocation of the controller and hence
driver data in order to push the free of that after anything tries to
reference the driver data in the remove path. This results in a
relatively large diff due to the addition of a new function but isn't
particularly complex.
There's also a fix from Sven van Asbroeck which fixes yet more fallout
from the conflicts between the various different places one can
configure the polarity of GPIOs in modern systems.
Otherwise everything is fairly small and driver specific"
* tag 'spi-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: npcm-fiu: Don't leak SPI master in probe error path
spi: dw: Set transfer handler before unmasking the IRQs
spi: cadence-quadspi: Fix error return code in cqspi_probe
spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe
spi: lpspi: Fix use-after-free on unbind
spi: bcm-qspi: Fix use-after-free on unbind
spi: bcm2835aux: Fix use-after-free on unbind
spi: bcm2835: Fix use-after-free on unbind
spi: Introduce device-managed SPI controller allocation
spi: fsi: Fix transfer returning without finalizing message
spi: fix client driver breakages when using GPIO descriptors
|
|
Karsten Graul says:
====================
net/smc: fixes 2020-11-18
Patch 1 fixes the matching of link groups because with SMC-Dv2 the vlanid
should no longer be part of this matching. Patch 2 removes a sparse message.
====================
Link: https://lore.kernel.org/r/20201118214038.24039-1-kgraul@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sparse complaints 3 times about:
net/smc/smc_ib.c:203:52: warning: incorrect type in argument 1 (different address spaces)
net/smc/smc_ib.c:203:52: expected struct net_device const *dev
net/smc/smc_ib.c:203:52: got struct net_device [noderef] __rcu *const ndev
Fix that by using the existing and validated ndev variable instead of
accessing attr->ndev directly.
Fixes: 5102eca9039b ("net/smc: Use rdma_read_gid_l2_fields to L2 fields")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the multi-subnet support of SMC-Dv2 the match for existing link
groups should not include the vlanid of the network device.
Set ini->smcd_version accordingly before the call to smc_conn_create()
and use this value in smc_conn_create() to skip the vlanid check.
Fixes: 5c21c4ccafe8 ("net/smc: determine accepted ISM devices")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Mostly core fixes here, one set from Michał Mirosław which cleans up
some issues introduced as part of the coupled regulators work, one
memory leak during probe and two due to regulators which have an input
supply name and regulator name which are identical, which is very
unusual.
There's also a fix for our handling of the similarly unusual case
where we can't determine if a regulator is enabled during boot"
* tag 'regulator-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: ti-abb: Fix array out of bound read access on the first transition
regulator: workaround self-referent regulators
regulator: avoid resolve_supply() infinite recursion
regulator: fix memory leak with repeated set_machine_constraints()
regulator: pfuze100: limit pfuze-support-disable-sw to pfuze{100,200}
regulator: core: don't disable regulator if is_enabled return error.
|
|
IPV6=m
NF_DEFRAG_IPV6=y
ld: net/ipv6/netfilter/nf_conntrack_reasm.o: in function
`nf_ct_frag6_gather':
net/ipv6/netfilter/nf_conntrack_reasm.c:462: undefined reference to
`ipv6_frag_thdr_truncated'
Netfilter is depending on ipv6 symbol ipv6_frag_thdr_truncated. This
dependency is forcing IPV6=y.
Remove this dependency by moving ipv6_frag_thdr_truncated out of ipv6. This
is the same solution as used with a similar issues: Referring to
commit 70b095c843266 ("ipv6: remove dependency of nf_defrag_ipv6 on ipv6
module")
Fixes: 9d9e937b1c8b ("ipv6/netfilter: Discard first fragment not including all headers")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20201119095833.8409-1-geokohma@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fix from Daniel Lezcano:
"Disable the CPU PM notifier for OMAP4430 for suspend in order to
prevent wrong temperature leading to a critical shutdown (Peter
Ujfalusi)"
* tag 'thermal-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal: ti-soc-thermal: Disable the CPU PM notifier for OMAP4430
|
|
We remove "other info" from "readelf -s --wide" output when
parsing GLOBAL_SYM_COUNT variable, which was added in [1].
But we don't do that for VERSIONED_SYM_COUNT and it's failing
the check_abi target on powerpc Fedora 33.
The extra "other info" wasn't problem for VERSIONED_SYM_COUNT
parsing until commit [2] added awk in the pipe, which assumes
that the last column is symbol, but it can be "other info".
Adding "other info" removal for VERSIONED_SYM_COUNT the same
way as we did for GLOBAL_SYM_COUNT parsing.
[1] aa915931ac3e ("libbpf: Fix readelf output parsing for Fedora")
[2] 746f534a4809 ("tools/libbpf: Avoid counting local symbols in ABI check")
Fixes: 746f534a4809 ("tools/libbpf: Avoid counting local symbols in ABI check")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201118211350.1493421-1-jolsa@kernel.org
|
|
Avoid r8153_ecm is compiled as built-in, if r8152 driver is compiled
as modules. Otherwise, the r8153_ecm would be used, even though the
device is supported by r8152 driver.
Fixes: c1aedf015ebd ("net/usb/r8153_ecm: support ECM mode for RTL8153")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/1394712342-15778-394-Taiwan-albertk@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* acpi-fan:
ACPI: fan: Initialize performance state sysfs attribute
|
|
* pm-cpuidle:
cpuidle: tegra: Annotate tegra_pm_set_cpu_in_lp2() with RCU_NONIDLE
|
|
pseries|pnv_setup_rfi_flush already does the count cache flush setup, and
we just added entry and uaccess flushes. So the name is not very accurate
any more. In both platforms we then also immediately setup the STF flush.
Rename them to _setup_security_mitigations and fold the STF flush in.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
For simplicity in backporting, the original entry_flush test contained
a lot of duplicated code from the rfi_flush test. De-duplicate that code.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add a test modelled on the RFI flush test which counts the number
of L1D misses doing a simple syscall with the entry flush on and off.
For simplicity of backporting, this test duplicates a lot of code from
rfi_flush. We clean that up in the next patch.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In kup.h we currently include kup-radix.h for all 64-bit builds, which
includes Book3S and Book3E. The latter doesn't make sense, Book3E
never uses the Radix MMU.
This has worked up until now, but almost by accident, and the recent
uaccess flush changes introduced a build breakage on Book3E because of
the bad structure of the code.
So disentangle things so that we only use kup-radix.h for Book3S. This
requires some more stubs in kup.h and fixing an include in
syscall_64.c.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache after user accesses.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache on kernel entry.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We are about to add an entry flush. The rfi (exit) flush test measures
the number of L1D flushes over a syscall with the RFI flush enabled and
disabled. But if the entry flush is also enabled, the effect of enabling
and disabling the RFI flush is masked.
If there is a debugfs entry for the entry flush, disable it during the RFI
flush and restore it later.
Reported-by: Spoorthy S <spoorts2@in.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-18
Jimmy Assarsson provides two patches for the kvaser_pciefd and kvaser_usb
drivers, where the can_bittiming_const are fixed.
The next patch is by me and fixes an erroneous flexcan_transceiver_enable()
during bus-off recovery in the flexcan driver.
Jarkko Nikula's patch for the m_can driver fixes the IRQ handler to only
process the interrupts if the device is not suspended.
* tag 'linux-can-fixes-for-5.10-20201118' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: m_can: process interrupt only when not runtime suspended
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
can: kvaser_usb: kvaser_usb_hydra: Fix KCAN bittiming limits
can: kvaser_pciefd: Fix KCAN bittiming limits
====================
Link: https://lore.kernel.org/r/20201118160414.2731659-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Slave function read the following capabilities from the wrong offset:
1. log_mc_entry_sz
2. fs_log_entry_sz
3. log_mc_hash_sz
Fix that by adjusting these capabilities offset to match firmware
layout.
Due to the wrong offset read, the following issues might occur:
1+2. Negative value reported at max_mcast_qp_attach.
3. Driver to init FW with multicast hash size of zero.
Fixes: a40ded604365 ("net/mlx4_core: Add masking for a few queries on HCA caps")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20201118081922.553-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Link: https://lore.kernel.org/r/20201117081137epcms2p84b5dd8d84ca608f44b0bb722b48f50b1@epcms2p8
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
stucture should be replaced by structure.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Link: https://lore.kernel.org/r/20201117080950epcms2p4d332688ce351321c3222734bca680b57@epcms2p4
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
max_payload is unused.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Link: https://lore.kernel.org/r/20201117080824epcms2p36f70e06e2d8bd51d1af278b26ca65725@epcms2p3
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Julian Wiedmann says:
====================
s390/qeth: updates 2020-11-17
This brings some cleanups, and a bunch of improvements for our
.get_link_ksettings() code.
====================
Link: https://lore.kernel.org/r/20201117161520.1089-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The link mode is a combination of port speed and port mode. But we
currently only consider the speed, and then typically select the
corresponding TP-based link mode. For 1G and 10G Fibre links this means
we display the wrong link modes.
Move the SPEED_* switch statements inside the PORT_* cases, and only
consider valid combinations where we can select the corresponding
link mode. Add the relevant link modes (1000baseX, 10000baseSR and
1000baseLR) that were introduced back with
commit 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G link modes").
To differentiate between 10000baseSR and 10000baseLR, use the detailed
media_type information that QUERY OAT provides.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Improve the initial link info with data obtained from QUERY OAT.
Doing so _only_ at initialization time avoids
1. dealing with multi-part replies, and
2. sifting through all the data that may get returned at runtime.
This allows us to determine the correct port type for the 1000BT variant
of recent OSA adapter generations (where the .card_type field in
QUERY CARD INFO is no longer sufficient).
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
