summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-01-03intel-iommu: move struct dmar_domain def out dma_remapping.hMark McLoughlin2-20/+20
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move DMA PTE defs out of dma_remapping.hMark McLoughlin2-22/+22
DMA_PTE_READ/WRITE are needed by kvm. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move context entry defs out from dma_remapping.hMark McLoughlin2-38/+38
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move root entry defs from dma_remapping.hMark McLoughlin2-33/+34
We keep the struct root_entry forward declaration for the pointer in struct intel_iommu. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move DMA_32/64BIT_PFN into intel-iommu.cMark McLoughlin2-5/+3
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: make init_dmars() staticMark McLoughlin2-2/+1
init_dmars() is not used outside of drivers/pci/intel-iommu.c Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: remove some unused struct intel_iommu fieldsMark McLoughlin2-6/+0
The seg, saved_msg and sysdev fields appear to be unused since before the code was first merged. linux/msi.h is not needed in linux/intel-iommu.h anymore since there is no longer a reference to struct msi_msg. The MSI code in drivers/pci/intel-iommu.c still has linux/msi.h included via linux/dmar.h. linux/sysdev.h isn't needed because there is no reference to struct sys_device. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-02Disallow gcc versions 3.{0,1}Ingo Molnar1-0/+4
GCC 3.0 and 3.1 are too old to build a working kernel. Signed-off-by: Ingo Molnar <mingo@elte.hu> [ This check got dropped as obsolete when I simplified the gcc header inclusion mess in f153b82121b0366fe0e5f9553545cce237335175, but Willy Tarreau reports actually having those old versions still.. -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Merge branch 'cpus4096-for-linus-2' of ↵Linus Torvalds198-1423/+2018
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits) x86: export vector_used_by_percpu_irq x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and() sched: nominate preferred wakeup cpu, fix x86: fix lguest used_vectors breakage, -v2 x86: fix warning in arch/x86/kernel/io_apic.c sched: fix warning in kernel/sched.c sched: move test_sd_parent() to an SMP section of sched.h sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0 sched: activate active load balancing in new idle cpus sched: bias task wakeups to preferred semi-idle packages sched: nominate preferred wakeup cpu sched: favour lower logical cpu number for sched_mc balance sched: framework for sched_mc/smt_power_savings=N sched: convert BALANCE_FOR_xx_POWER to inline functions x86: use possible_cpus=NUM to extend the possible cpus allowed x86: fix cpu_mask_to_apicid_and to include cpu_online_mask x86: update io_apic.c to the new cpumask code x86: Introduce topology_core_cpumask()/topology_thread_cpumask() x86: xen: use smp_call_function_many() x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c ... Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-02Merge branch 'kvm-updates/2.6.29' of ↵Linus Torvalds68-2606/+4760
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (140 commits) KVM: MMU: handle large host sptes on invlpg/resync KVM: Add locking to virtual i8259 interrupt controller KVM: MMU: Don't treat a global pte as such if cr4.pge is cleared MAINTAINERS: Maintainership changes for kvm/ia64 KVM: ia64: Fix kvm_arch_vcpu_ioctl_[gs]et_regs() KVM: x86: Rework user space NMI injection as KVM_CAP_USER_NMI KVM: VMX: Fix pending NMI-vs.-IRQ race for user space irqchip KVM: fix handling of ACK from shared guest IRQ KVM: MMU: check for present pdptr shadow page in walk_shadow KVM: Consolidate userspace memory capability reporting into common code KVM: Advertise the bug in memory region destruction as fixed KVM: use cpumask_var_t for cpus_hardware_enabled KVM: use modern cpumask primitives, no cpumask_t on stack KVM: Extract core of kvm_flush_remote_tlbs/kvm_reload_remote_mmus KVM: set owner of cpu and vm file operations anon_inodes: use fops->owner for module refcount x86: KVM guest: kvm_get_tsc_khz: return khz, not lpj KVM: MMU: prepopulate the shadow on invlpg KVM: MMU: skip global pgtables on sync due to cr3 switch KVM: MMU: collapse remote TLB flushes on root sync ...
2009-01-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds22-1609/+614
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (32 commits) ide-atapi: start dma in a drive-specific way ide-atapi: put the rest of non-ide-cd code into the else-clause of ide_transfer_pc ide-atapi: remove timeout arg to ide_issue_pc ide-cd: remove handler wrappers ide-cd: remove xferlen arg to cdrom_start_packet_command ide-atapi: split drive-specific functionality in ide_issue_pc ide-atapi: assign expiry and timeout based on device type ide-atapi: compute cmd_len based on device type in ide_transfer_pc ide: remove the last ide-scsi remnants ide-atapi: remove ide-scsi remnants from ide_pc_intr() ide-atapi: remove ide-scsi remnants from ide_transfer_pc() ide-atapi: remove ide-scsi remnants from ide_issue_pc ide-cd: move cdrom_timer_expiry to ide-atapi.c ide-atapi: teach ide atapi about drive->waiting_for_dma ide-atapi: accomodate transfer length calculation for ide-cd ide-atapi: setup dma for ide-cd ide-atapi: combine drive-specific assignments ide-atapi: add a dev_is_idecd-inline remove ide-scsi ide-floppy: allocate only toplevel packet commands ...
2009-01-02Merge branch 'for-upstream' of ↵Linus Torvalds75-2837/+3252
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (31 commits) uwb: remove beacon cache entry after calling uwb_notify() uwb: remove unused include/linux/uwb/debug.h uwb: use print_hex_dump() uwb: use dev_dbg() for debug messages uwb: fix memory leak in uwb_rc_notif() wusb: fix oops when terminating a non-existant reservation uwb: fix oops when terminating an already terminated reservation uwb: improved MAS allocator and reservation conflict handling wusb: add debug files for ASL, PZL and DI to the whci-hcd driver uwb: fix oops in debug PAL's reservation callback uwb: clean up whci_wait_for() timeout error message wusb: whci-hcd shouldn't do ASL/PZL updates while channel is inactive uwb: remove unused beacon group join/leave events wlp: start/stop radio on network interface up/down uwb: add basic radio manager uwb: add pal parameter to new reservation callback uwb: fix races between events and neh timers uwb: don't unbind the radio controller driver when resetting uwb: per-radio controller event thread and beacon cache uwb: add commands to add/remove IEs to the debug interface ...
2009-01-02Update powerpc maintainersPaul Mackerras1-3/+3
Ben Herrenschmidt is taking over as the primary powerpc architecture maintainer. I'll still be around as his backup/deputy. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Merge branch 'i8k-updates' from AlanLinus Torvalds1-1/+15
* i8k-updates: i8k: Add Dell Vostro systems i8k: Enable i8k on Dell Precision Systems
2009-01-02i8k: Add Dell Vostro systemsFederico Heinz1-1/+8
This trivial patch adds support for i8k on the new Dell Vostro models. I tested it on my Vostro 1400, and it works. It does print a warning when loading the module: i8k: unable to get SMM BIOS version But I couldn't figure out how to fix that. The module seems to work fine, anyway... Signed-off-by: Federico Heinz <fheinz@vialibre.org.ar> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02i8k: Enable i8k on Dell Precision SystemsAndy Spencer1-0/+7
Patch to enable i8k on Dell Precisions. Signed-off-by: Andy Spencer <spenceal@rose-hulman.edu> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Fix compiler warning in arch/x86/mm/init_32.cIngo Brueckl1-2/+6
Signed-off-by: Ingo Brueckl <ib@wupperonline.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Merge branch 'tty-updates' from AlanLinus Torvalds64-2604/+3538
* tty-updates: (75 commits) serial_8250: support for Sealevel Systems Model 7803 COMM+8 hso maintainers update patch hso modem detect fix patch against Alan Cox'es tty tree tty: Fix an ircomm warning and note another bug drivers/char/cyclades.c: cy_pci_probe: fix error path Serial: UART driver changes for Cavium OCTEON. Serial: Allow port type to be specified when calling serial8250_register_port. 8250: Serial driver changes to support future Cavium OCTEON serial patches. 8250: Don't clobber spinlocks. fix for tty-serial-move-port tty: We want the port object to be persistent __FUNCTION__ is gcc-specific, use __func__ serial: RS485 ioctl structure uses __u32 include linux/types.h tty: Drop the lock_kernel in the private ioctl hook synclink_cs: Convert to tty_port tty: use port methods for the rocket driver tty: kref the rocket driver tty: make rocketport use standard port->flags tty: Redo the rocket driver locking tty: Make epca use the port helpers ...
2009-01-02serial_8250: support for Sealevel Systems Model 7803 COMM+8Flavio Leitner2-0/+4
Add support for Sealevel Systems Model 7803 COMM+8 Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02hso maintainers update patchDenis Joseph Barrow2-0/+8
Added D.J. Barrow as maintainer of hso driver. Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02hso modem detect fix patch against Alan Cox'es tty treeDenis Joseph Barrow1-1/+1
Fixed incorrect check for the modem port, this prevents crashes caused by issueing a tiocmget_submit_urb on endpoints which don't exist for non modem devices. Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: Fix an ircomm warning and note another bugAlan Cox1-2/+3
Roel Kluin noted that line is unsigned so one test is unneccessary. Also add a warning for another flaw I noticed while making this change. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02drivers/char/cyclades.c: cy_pci_probe: fix error pathAndrew Morton1-1/+1
We forgot to release resources in one case. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12137 Reported-by: Florian Lohoff <flo@rfc822.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Serial: UART driver changes for Cavium OCTEON.David Daney2-1/+9
Cavium UART implementation is not covered by existing uart_configS. Define a new uart_config (PORT_OCTEON) which is specified by OCTEON platform device registration code. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Serial: Allow port type to be specified when calling serial8250_register_port.David Daney4-2/+17
Add flag value UPF_FIXED_TYPE which specifies that the UART type is known and should not be probed. For this case the UARTs properties are just copied out of the uart_config entry. This allows us to keep SOC specific 8250 probe code out of 8250.c. In this case we know the serial hardware will not be changing as it is on the same silicon as the CPU, and we can specify it with certainty in the board/cpu setup code. The alternative is to load up 8250.c with a bunch of OCTEON specific special cases in the probing code. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-028250: Serial driver changes to support future Cavium OCTEON serial patches.David Daney3-58/+140
In order to use Cavium OCTEON specific serial i/o drivers, we first patch the 8250 driver to use replaceable I/O functions. Compatible I/O functions are added for existing iotypeS. An added benefit of this change is that it makes it easy to factor some of the existing special cases out to board/SOC specific support code. The alternative is to load up 8250.c with a bunch of OCTEON specific iotype code and bug work-arounds. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-028250: Don't clobber spinlocks.David Daney1-2/+13
In serial8250_isa_init_ports(), the port's lock is initialized. We should not overwrite it. In early_serial_setup(), only copy in the fields we need. Since the early console code only uses a subset of the fields, these are sufficient. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02fix for tty-serial-move-portAlexander Beregalov1-3/+1
Hi Alan next-20081204 crashes with the following message: BUG: unable to handle kernel paging request at ffff88007d320248 IP: [<ffffffff803de934>] uart_remove_one_port+0xef/0x111 kfree(info); 393: 49 8d 7d 10 lea 0x10(%r13),%rdi 397: e8 00 00 00 00 callq 39c <uart_remove_one_port+0xef> Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: We want the port object to be persistentAlan Cox3-112/+96
Move the tty_port and uart_info bits around a little. By embedding the uart_info into the uart_port we get rid of lots of corner case testing and also get the ability to go port<->state<->info which is a bit more elegant than the current data structures. Downsides - we allocate a tiny bit more memory for unused ports, upside we've removed as much code as it saved for most users.. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02__FUNCTION__ is gcc-specific, use __func__Harvey Harrison1-30/+30
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02serial: RS485 ioctl structure uses __u32 include linux/types.hAndy Whitcroft1-1/+2
In the commit below a new struct serial_rs485 was introduced for a new ioctl: commit c26c56c0f40e200e61d1390629c806f6adaffbcc Author: Alan Cox <alan@redhat.com> Date: Mon Oct 13 10:37:48 2008 +0100 tty: Cris has a nice RS485 ioctl so we should steal it This structure uses the __u32 types for some of its members, which leads to the following compile error: $ cc -I.../include -c X.c In file included from X.c:2: .../include/linux/serial.h:185: error: expected specifier-qualifier-list before ‘__u32’ $ It seems that these types are appropriate for this structure as it is to be exposed to userspace. These types are available via linux/types.h so move the include of that outside the __KERNEL__ section. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: Drop the lock_kernel in the private ioctl hookAlan Cox5-8/+14
We don't need the BKL here any more so it can go. In a couple of spots the driver requirements are not clear so push the lock down into the driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02synclink_cs: Convert to tty_portAlan Cox1-298/+181
Use the tty port operations, add refcounting, and refactor a bit to make the refcounting work cleanly. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: use port methods for the rocket driverAlan Cox2-159/+21
Now we have our ducks in order we can begin switching to the port operations Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: kref the rocket driverAlan Cox1-37/+41
We will need this kref fitted to make full use of the port operations. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: make rocketport use standard port->flagsAlan Cox1-19/+19
We need to this ready for using the standard helpers Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: Redo the rocket driver lockingAlan Cox2-24/+20
Bring this driver into the port locking model Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: Make epca use the port helpersAlan Cox2-149/+26
Now the locking is straight and the port kref usage is straight we can replace lots of chunks of code with the standard port helpers Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: refcount the epca driverAlan Cox1-12/+15
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: relock epcaAlan Cox1-91/+104
Bring epca into line with the port locking. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: Modem functions for the HSO driverDenis Joseph Barrow1-13/+318
Makes TIOCM ioctls for Data Carrier Detect & related functions work like /drivers/serial/serial-core.c potentially needed for pppd & similar user programs. Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: Fix the HSO termios handling a bitAlan Cox1-24/+31
Init the tty structure once Don't set ->low_latency twice in a row Don't force bits we should be leaving to the user Don't allocate termios arrays as these are in fact allocated by the tty layer for you and just overwrite the ones allocated in the driver Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02hso: net driver using tty without lockingAlan Cox1-12/+42
Checking tty == NULL doesn't help us unless we have a clear semantic for the locking of the tty object in the driver. Use the tty kref objects so that we can take references to the tty in the USB event handling paths. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: kref nozomiAlan Cox1-40/+45
Update the nozomi driver to use krefs Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: Remove some pointless castsAlan Cox16-150/+150
disc_data and driver_data are void * Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: PTYs set TTY_DO_WRITE_WAKEUP when they don't need toAlan Cox1-3/+0
The write wakeup is done anyway for the poll while DO_WRITE_WAKUP is cleared, set and managed by the ldisc layer and is no business of the pty code. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: N_TTY SIGIO only works for readThomas Pfaff1-3/+3
The N_TTY ldisc layer does not send SIGIO POLL_OUTs correctly when output is possible due to flawed handling of the TTY_DO_WRITE_WAKEUP bit. It will either send no SIGIOs at all or on every tty wakeup. The fix is to set the bit when the tty driver write would block and test and clear it on write wakeup. [Merged with existing N_TTY patches and a small buglet fixed -- Alan] Signed-off-by: Thomas Pfaff <tpfaff@pcs.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: USB tty devices can block in tcdrain when unpluggedAlan Cox1-0/+4
The underlying problem is that the device methods don't all correctly handle disconnected status and some keep reporting bytes pending which causes tcdrain to stall. When the cable is unplugged they are definitely gone, and as this is true for all USB cables we can fix it in the core usb serial code. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02serial: set correct baud_base for Oxford Semiconductor Ltd EXSYS EX-41092 ↵Niels de Vos2-0/+4
Dual 16950 Serial adapter The PCI-card identified as "Oxford Semiconductor Ltd EXSYS EX-41092 Dual 16950 Serial adapter" is only usable with other devices (i.e. not the same card) after doing a "setserial /dev/ttyS<n> baud_base 115200". This baud_base should be default for this card. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: Introduce some close helpers for portsAlan Cox11-391/+126
Again this is a lot of common code we can unify Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 18:51:05 +0300