summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-11-18octeontx2-af: Handle PF-VF mac address changesHariprasad Kelam4-4/+36
This patch handles the VF mac address changes as given below. 1. mac addr configrued by VF will be retained until VF module unload. 2. mac addr configred by PF for VF will be retained until power cycle. 3. mac addr confgired by PF for its VF can't be overwritten by VF. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18octeontx2-pf: Add support for SR-IOV management functionsNaveen Mamindlapalli9-2/+420
This patch adds support for ndo_set_vf_mac, ndo_set_vf_vlan and ndo_get_vf_config handlers. The traffic redirection based on the VF mac address or vlan id is done by installing MCAM rules. Reserved RX_VTAG_TYPE7 in each NIXLF for VF VLAN which strips the VLAN tag from ingress VLAN traffic. The NIX PF allocates two MCAM entries for VF VLAN feature, one used for ingress VTAG strip and another entry for egress VTAG insertion. This patch also updates the MAC address in PF installed VF VLAN rule upon receiving nix_lf_start_rx mbox request for VF since Administrative Function driver will assign a valid MAC addr in nix_lf_start_rx function. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Co-developed-by: Tomasz Duszynski <tduszynski@marvell.com> Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18octeontx2-pf: Implement ingress/egress VLAN offloadHariprasad Kelam8-4/+167
This patch implements egress VLAN offload by appending NIX_SEND_EXT_S header to NIX_SEND_HDR_S. The VLAN TCI information is specified in the NIX_SEND_EXT_S. The VLAN offload in the ingress path is implemented by configuring the NIX_RX_VTAG_ACTION_S to strip and capture the outer vlan fields. The NIX PF allocates one MCAM entry for Rx VLAN offload. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entriesVamsi Attunuru3-13/+250
This patch modifies the existing nix_vtag_config mailbox message to allocate and free TX VTAG entries as requested by a NIX PF. The TX VTAG entries are global resource that shared by all PFs and each entry specifies the size of VTAG to insert and the VTAG header data to insert. The mailbox response contains the entry index which is used by mailbox requester in configuring the NPC_TX_VTAG_ACTION for any MCAM entry. Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18octeontx2-af: Add debugfs entry to dump the MCAM rulesSubbaraya Sundeep1-0/+197
Add debugfs support to dump the MCAM rules installed using NPC_INSTALL_FLOW mbox message. Debugfs file can display mcam entry, counter if any, flow type and counter hits. Ethtool will dump the ntuple flows related to the PF only. The debugfs file gives systemwide view of the MCAM rules installed by all the PF's. Below is the example output when the debugfs file is read: ~ # mount -t debugfs none /sys/kernel/debug ~ # cat /sys/kernel/debug/octeontx2/npc/mcam_rules Installed by: PF1 direction: RX mcam entry: 227 udp source port 23 mask 0xffff Forward to: PF1 VF0 action: Direct to queue 0 enabled: yes counter: 1 hits: 0 Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18octeontx2-pf: Add support for unicast MAC address filteringHariprasad Kelam3-7/+143
Add unicast MAC address filtering support using install flow message. Total of 8 MCAM entries are allocated for adding unicast mac filtering rules. If the MCAM allocation fails, the unicast filtering support will not be advertised. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18octeontx2-pf: Add support for ethtool ntuple filtersSubbaraya Sundeep5-5/+707
This patch adds support for adding and deleting ethtool ntuple filters. The filters for ether, ipv4, ipv6, tcp, udp and sctp are supported. The mask is also supported. The supported actions are drop and direct to a queue. Additionally we support FLOW_EXT field vlan_tci and FLOW_MAC_EXT. The NIX PF will allocate total 32 MCAM entries for the use of ethtool ntuple filters. The Administrative Function(AF) will install/delete the MCAM rules when NIX PF sends mailbox message to install/delete the ntuple filters. Ethtool ntuple filters support is restricted to PFs as of now and PF can install ntuple filters to direct the traffic to its VFs. Hence added a separate callback for VFs to get/set RSS configuration. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18octeontx2-af: Add mbox messages to install and delete MCAM rulesSubbaraya Sundeep8-52/+1064
Added new mailbox messages to install and delete MCAM rules. These mailbox messages will be used for adding/deleting ethtool n-tuple filters by NIX PF. The installed MCAM rules are stored in a list that will be traversed later to delete the MCAM entries when the interface is brought down or when PCIe FLR is received. The delete mailbox supports deleting a single MCAM entry or range of entries or all the MCAM entries owned by the pcifunc. Each MCAM entry can be associated with a HW match stat entry if the mailbox requester wants to check the hit count for debugging. Modified adding default unicast DMAC match rule using install flow API. The default unicast DMAC match entry installed by Administrative Function is saved and can be changed later by the mailbox user to fit additional fields, or the default MCAM entry rule action can be used for other flow rules installed later. Modified rvu_mbox_handler_nix_lf_free mailbox to add a flag to disable or delete the MCAM entries. The MCAM entries are disabled when the interface is brought down and deleted in FLR handler. The disabled MCAM entries will be re-enabled when the interface is brought up again. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18octeontx2-af: Generate key field bit mask from KEX profileSubbaraya Sundeep5-3/+658
Key Extraction(KEX) profile decides how the packet metadata such as layer information and selected packet data bytes at each layer are placed in MCAM search key. This patch reads the configured KEX profile parameters to find out the bit position and bit mask for each field. The information is used when programming the MCAM match data by SW to match a packet flow and take appropriate action on the flow. This patch also verifies the mandatory fields such as channel and DMAC are not overwritten by the KEX configuration of other fields. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18octeontx2-af: Verify MCAM entry channel and PF_FUNCSubbaraya Sundeep3-2/+82
This patch adds support to verify the channel number sent by mailbox requester before writing MCAM entry for Ingress packets. Similarly for Egress packets, verifying the PF_FUNC sent by the mailbox user. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18octeontx2-af: Modify default KEX profile to extract TX packet fieldsStanislaw Kardach3-14/+120
The current default Key Extraction(KEX) profile can only use RX packet fields while generating the MCAM search key. The profile can't be used for matching TX packet fields. This patch modifies the default KEX profile to add support for extracting TX packet fields into MCAM search key. Enabled Tx KPU packet parsing by configuring TX PKIND in tx_parse_cfg. Modified the KEX profile to extract 2 bytes of VLAN TCI from an offset of 2 bytes from LB_PTR. The LB_PTR points to the byte offset where the VLAN header starts. The NPC KPU parser profile has been modified to point LB_PTR to the starting byte offset of VLAN header which points to the tpid field. Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18net: wan: Delete the DLCI / SDLA driversXie He15-2902/+0
The DLCI driver (dlci.c) implements the Frame Relay protocol. However, we already have another newer and better implementation of Frame Relay provided by the HDLC_FR driver (hdlc_fr.c). The DLCI driver's implementation of Frame Relay is used by only one hardware driver in the kernel - the SDLA driver (sdla.c). The SDLA driver provides Frame Relay support for the Sangoma S50x devices. However, the vendor provides their own driver (along with their own multi-WAN-protocol implementations including Frame Relay), called WANPIPE. I believe most users of the hardware would use the vendor-provided WANPIPE driver instead. (The WANPIPE driver was even once in the kernel, but was deleted in commit 8db60bcf3021 ("[WAN]: Remove broken and unmaintained Sangoma drivers.") because the vendor no longer updated the in-kernel WANPIPE driver.) Cc: Mike McLagan <mike.mclagan@linux.org> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201114150921.685594-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17Merge branch 'net-hns3-updates-for-next'Jakub Kicinski9-37/+182
Huazhong Tan says: ==================== net: hns3: updates for -next There are several updates relating to the interrupt coalesce for the HNS3 ethernet driver. based on the frame quantity). a fixed value in code. based on the gap time). its new usage. change log: V4 - remove #5~#10 from this series, which needs more discussion. V3 - fix a typo error in #1 reported by Jakub Kicinski. rewrite #9 commit log. remove #11 from this series. V2 - reorder #2 & #3 to fix compiler error. fix some checkpatch warnings in #10 & #11. previous version: V3: https://patchwork.ozlabs.org/project/netdev/cover/1605151998-12633-1-git-send-email-tanhuazhong@huawei.com/ V2: https://patchwork.ozlabs.org/project/netdev/cover/1604892159-19990-1-git-send-email-tanhuazhong@huawei.com/ V1: https://patchwork.ozlabs.org/project/netdev/cover/1604730681-32559-1-git-send-email-tanhuazhong@huawei.com/ ==================== Link: https://lore.kernel.org/r/1605514854-11205-1-git-send-email-tanhuazhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: hns3: rename gl_adapt_enable in struct hns3_enet_coalesceHuazhong Tan3-11/+11
Besides GL(Gap Limiting), QL(Quantity Limiting) can be modified dynamically when DIM is supported. So rename gl_adapt_enable as adapt_enable in struct hns3_enet_coalesce. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: hns3: add support for 1us unit GL configurationHuazhong Tan3-4/+31
For device whose version is above V3(include V3), the GL configuration can set as 1us unit, so adds support for configuring this field. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: hns3: add support for querying maximum value of GLHuazhong Tan8-7/+38
For maintainability and compatibility, add support for querying the maximum value of GL. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: hns3: add support for configuring interrupt quantity limitingHuazhong Tan5-18/+105
QL(quantity limiting) means that hardware supports the interrupt coalesce based on the frame quantity. QL can be configured when int_ql_max in device's specification is non-zero, so add support to configure it. Also, rename two coalesce init function to fit their purpose. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17Merge branch 'net-phy-add-support-for-shared-interrupts-part-2'Jakub Kicinski10-122/+405
Ioana Ciornei says: ==================== net: phy: add support for shared interrupts (part 2) This patch set aims to actually add support for shared interrupts in phylib and not only for multi-PHY devices. While we are at it, streamline the interrupt handling in phylib. For a bit of context, at the moment, there are multiple phy_driver ops that deal with this subject: - .config_intr() - Enable/disable the interrupt line. - .ack_interrupt() - Should quiesce any interrupts that may have been fired. It's also used by phylib in conjunction with .config_intr() to clear any pending interrupts after the line was disabled, and before it is going to be enabled. - .did_interrupt() - Intended for multi-PHY devices with a shared IRQ line and used by phylib to discern which PHY from the package was the one that actually fired the interrupt. - .handle_interrupt() - Completely overrides the default interrupt handling logic from phylib. The PHY driver is responsible for checking if any interrupt was fired by the respective PHY and choose accordingly if it's the one that should trigger the link state machine. From my point of view, the interrupt handling in phylib has become somewhat confusing with all these callbacks that actually read the same PHY register - the interrupt status. A more streamlined approach would be to just move the responsibility to write an interrupt handler to the driver (as any other device driver does) and make .handle_interrupt() the only way to deal with interrupts. Another advantage with this approach would be that phylib would gain support for shared IRQs between different PHY (not just multi-PHY devices), something which at the moment would require extending every PHY driver anyway in order to implement their .did_interrupt() callback and duplicate the same logic as in .ack_interrupt(). The disadvantage of making .did_interrupt() mandatory would be that we are slightly changing the semantics of the phylib API and that would increase confusion instead of reducing it. What I am proposing is the following: - As a first step, make the .ack_interrupt() callback optional so that we do not break any PHY driver amid the transition. - Every PHY driver gains a .handle_interrupt() implementation that, for the most part, would look like below: irq_status = phy_read(phydev, INTR_STATUS); if (irq_status < 0) { phy_error(phydev); return IRQ_NONE; } if (!(irq_status & irq_mask)) return IRQ_NONE; phy_trigger_machine(phydev); return IRQ_HANDLED; - Remove each PHY driver's implementation of the .ack_interrupt() by actually taking care of quiescing any pending interrupts before enabling/after disabling the interrupt line. - Finally, after all drivers have been ported, remove the .ack_interrupt() and .did_interrupt() callbacks from phy_driver. This patch set is part 2 of the entire change set and it addresses the changes needed in 9 PHY drivers. The rest can be found on my Github branch here: https://github.com/IoanaCiornei/linux/commits/phylib-shared-irq ==================== Link: https://lore.kernel.org/r/20201113165226.561153-1-ciorneiioana@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: adin: remove the use of the .ack_interrupt()Ioana Ciornei1-7/+18
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: adin: implement generic .handle_interrupt() callbackIoana Ciornei1-0/+20
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: ste10Xp: remove the use of .ack_interrupt()Ioana Ciornei1-19/+22
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: ste10Xp: implement generic .handle_interrupt() callbackIoana Ciornei1-0/+20
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: smsc: remove the use of .ack_interrupt()Ioana Ciornei1-15/+18
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Andre Edich <andre.edich@microchip.com> Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: smsc: implement generic .handle_interrupt() callbackIoana Ciornei1-0/+30
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Andre Edich <andre.edich@microchip.com> Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: amd: remove the use of .ack_interrupt()Ioana Ciornei1-3/+11
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: amd: implement generic .handle_interrupt() callbackIoana Ciornei1-0/+23
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: nxp-tja11xx: remove the use of .ack_interrupt()Ioana Ciornei1-4/+15
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Marek Vasut <marex@denx.de> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: nxp-tja11xx: implement generic .handle_interrupt() callbackIoana Ciornei1-0/+23
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Marek Vasut <marex@denx.de> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: lxt: remove the use of .ack_interrupt()Ioana Ciornei1-10/+34
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: lxt: implement generic .handle_interrupt() callbackIoana Ciornei1-0/+50
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: marvell: remove the use of .ack_interrupt()Ioana Ciornei1-20/+11
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Maxim Kochetkov <fido_max@inbox.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: marvell: implement generic .handle_interrupt() callbackIoana Ciornei1-21/+36
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Maxim Kochetkov <fido_max@inbox.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: microchip: remove the use of .ack_interrupt()Ioana Ciornei2-18/+12
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Nisar Sayed <Nisar.Sayed@microchip.com> Cc: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: microchip: implement generic .handle_interrupt() callbackIoana Ciornei2-0/+38
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Nisar Sayed <Nisar.Sayed@microchip.com> Cc: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: vitesse: remove the use of .ack_interrupt()Ioana Ciornei1-21/+3
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Kavya Sree Kotagiri <kavyasree.kotagiri@microchip.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: vitesse: implement generic .handle_interrupt() callbackIoana Ciornei1-0/+37
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Kavya Sree Kotagiri <kavyasree.kotagiri@microchip.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: linux/skbuff.h: combine SKB_EXTENSIONS + KCOV handlingRandy Dunlap1-2/+2
The previous Kconfig patch led to some other build errors as reported by the 0day bot and my own overnight build testing. These are all in <linux/skbuff.h> when KCOV is enabled but SKB_EXTENSIONS is not enabled, so fix those by combining those conditions in the header file. Fixes: 6370cc3bbd8a ("net: add kcov handle to skb extensions") Fixes: 85ce50d337d1 ("net: kcov: don't select SKB_EXTENSIONS when there is no NET") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Aleksandr Nogikh <nogikh@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20201116212108.32465-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17lan743x: replace devicetree phy parse code with library functionSven Van Asbroeck2-28/+8
The code in this driver which parses the devicetree to determine the phy/fixed link setup, can be replaced by a single library function: of_phy_get_and_connect(). Behaviour is identical, except that the library function will complain when 'phy-connection-type' is omitted, instead of blindly using PHY_INTERFACE_MODE_NA, which would result in an invalid phy configuration. The library function no longer brings out the exact phy_mode, but the driver doesn't need this, because phy_interface_is_rgmii() queries the phydev directly. Remove 'phy_mode' from the private adapter struct. While we're here, log info about the attached phy on connect, this is useful because the phy type and connection method is now fully configurable via the devicetree. Tested on a lan7430 chip with built-in phy. Verified that adding fixed-link/phy-connection-type in the devicetree results in a fixed-link setup. Used ethtool to verify that the devicetree settings are used. Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201116170155.26967-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: don't duplicate driver name in phy_attached_printHeiner Kallweit1-8/+6
Currently we print the driver name twice in phy_attached_print(): - phy_dev_info() prints it as part of the device info - and we print it as part of the info string This is a little bit ugly, it makes the info harder to read, especially if the driver name is a little bit longer. Therefore omit the driver name (if set) in the info string. Example from r8169 that uses phylib: old: Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver \ [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) new: Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver \ (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/8ab72586-f079-41d8-84ee-9f6a5bd97b2a@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17r8169: remove nr_frags argument from rtl_tx_slots_availHeiner Kallweit1-9/+6
The only time when nr_frags isn't SKB_MAX_FRAGS is when entering rtl8169_start_xmit(). However we can use SKB_MAX_FRAGS also here because when queue isn't stopped there should always be room for MAX_SKB_FRAGS + 1 descriptors. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/3d1f2ad7-31d5-2cac-4f4a-394f8a3cab63@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: mscc: fix excluded_middle.cocci warningskernel test robot1-1/+1
Condition !A || A && B is equivalent to !A || B. Generated by: scripts/coccinelle/misc/excluded_middle.cocci Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2011161633240.2682@hadrien Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17Merge branch 'net-dsa-tag_dsa-unify-regular-and-ethertype-dsa-taggers'Jakub Kicinski4-268/+271
Tobias Waldekranz says: ==================== net: dsa: tag_dsa: Unify regular and ethertype DSA taggers The first patch ports tag_edsa.c's handling of IGMP/MLD traps to tag_dsa.c. That way, we start from two logically equivalent taggers that are then merged. The second commit does the heavy lifting of actually fusing tag_dsa.c and tag_edsa.c. The final one just follows up with some clean up of existing comments. v2 -> v3: - Add the first patch described above as suggested by Andrew. - Better documentation of TO_SNIFFER and FORWARD tags. - Spelling. v1 -> v2: - Fixed some grammar and whitespace errors. - Removed unnecessary default value in Kconfig. - Removed unnecessary #ifdef. - Split out comment fixes from functional changes. - Fully document enum dsa_code. ==================== Link: https://lore.kernel.org/r/20201114234558.31203-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: dsa: tag_dsa: Use a consistent comment styleTobias Waldekranz1-20/+8
Use a consistent style of one-line/multi-line comments throughout the file. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: dsa: tag_dsa: Unify regular and ethertype DSA taggersTobias Waldekranz4-263/+252
Ethertype DSA encodes exactly the same information in the DSA tag as the non-ethertype variety. So refactor out the common parts and reuse them for both protocols. This is ensures tag parsing and generation is always consistent across all mv88e6xxx chips. While we are at it, explicitly deal with all possible CPU codes on receive, making sure to set offload_fwd_mark as appropriate. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: dsa: tag_dsa: Allow forwarding of redirected IGMP trafficTobias Waldekranz1-3/+29
When receiving an IGMP/MLD frame with a TO_CPU tag, the switch has not performed any forwarding of it. This means that we should not set the offload_fwd_mark on the skb, in case a software bridge wants it forwarded. This is a port of: 1ed9ec9b08ad ("dsa: Allow forwarding of redirected IGMP traffic") Which corrected the issue for chips using EDSA tags, but not for those using regular DSA tags. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16Merge branch 'mptcp-improve-multiple-xmit-streams-support'Jakub Kicinski8-498/+776
Paolo Abeni says: ==================== mptcp: improve multiple xmit streams support This series improves MPTCP handling of multiple concurrent xmit streams. The to-be-transmitted data is enqueued to a subflow only when the send window is open, keeping the subflows xmit queue shorter and allowing for faster switch-over. The above requires a more accurate msk socket state tracking and some additional infrastructure to allow pushing the data pending in the msk xmit queue as soon as the MPTCP's send window opens (patches 6-10). As a side effect, the MPTCP socket could enqueue data to subflows after close() time - to completely spooling the data sitting in the msk xmit queue. Dealing with the requires some infrastructure and core TCP changes (patches 1-5) Finally, patches 11-12 introduce a more accurate tracking of the other end's receive window. Overall this refactor the MPTCP xmit path, without introducing new features - the new code is covered by the existing self-tests. v2 -> v3: - rebased, - fixed checkpatch issue in patch 1/13 - fixed some state tracking issues in patch 8/13 v1 -> v2: - this is just a repost, to cope with patchwork issues, no changes at all ==================== Link: https://lore.kernel.org/r/cover.1605458224.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16mptcp: send explicit ack on delayed ack_seq incrPaolo Abeni1-13/+21
When the worker moves some bytes from the OoO queue into the receive queue, the msk->ask_seq is updated, the MPTCP-level ack carrying that value needs to wait the next ingress packet, possibly slowing down or hanging the peer Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16mptcp: keep track of advertised windows right edgeFlorian Westphal3-5/+69
Before sending 'x' new bytes also check that the new snd_una would be within the permitted receive window. For every ACK that also contains a DSS ack, check whether its tcp-level receive window would advance the current mptcp window right edge and update it if so. Signed-off-by: Florian Westphal <fw@strlen.de> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16mptcp: rework poll+nospace handlingFlorian Westphal3-51/+54
MPTCP maintains a status bit, MPTCP_SEND_SPACE, that is set when at least one subflow and the mptcp socket itself are writeable. mptcp_poll returns EPOLLOUT if the bit is set. mptcp_sendmsg makes sure MPTCP_SEND_SPACE gets cleared when last write has used up all subflows or the mptcp socket wmem. This reworks nospace handling as follows: MPTCP_SEND_SPACE is replaced with MPTCP_NOSPACE, i.e. inverted meaning. This bit is set when the mptcp socket is not writeable. The mptcp-level ack path schedule will then schedule the mptcp worker to allow it to free already-acked data (and reduce wmem usage). This will then wake userspace processes that wait for a POLLOUT event. sendmsg will set MPTCP_NOSPACE only when it has to wait for more wmem (blocking I/O case). poll path will set MPTCP_NOSPACE in case the mptcp socket is not writeable. Normal tcp-level notification (SOCK_NOSPACE) is only enabled in case the subflow socket has no available wmem. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16mptcp: try to push pending data on snd una updatesPaolo Abeni1-0/+3
After the previous patch we may end-up with unsent data in the write buffer. If such buffer is full, the writer will block for unlimited time. We need to trigger the MPTCP xmit path even for the subflow rx path, on MPTCP snd_una updates. Keep things simple and just schedule the work queue if needed. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-17 04:15:24 +0300