| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In MTRR code use_intel() is only used in one source file, and the
relevant use_intel_if member of struct mtrr_ops is set only in
generic_mtrr_ops.
Replace use_intel() with a single flag in cacheinfo.c which can be
set when assigning generic_mtrr_ops to mtrr_if. This allows to drop
use_intel_if from mtrr_ops, while preparing to decouple PAT from MTRR.
As another preparation for the PAT/MTRR decoupling use a bit for MTRR
control and one for PAT control. For now set both bits together, this
can be changed later.
As the new flag will be set only if mtrr_enabled is set, the test for
mtrr_enabled can be dropped at some places.
[ bp: Massage commit message. ]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-4-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Intel processors support additional software hint called EPB ("Energy
Performance Bias") to guide the hardware heuristic of power management
features to favor increasing dynamic performance or conserve energy
consumption.
Since this EPB hint is processor specific, the same value of hint can
result in different behavior across generations of processors.
commit 4ecc933b7d1f ("x86: intel_epb: Allow model specific normal EPB
value")' introduced capability to update the default power up EPB
based on the CPU model and updated the default EPB to 7 for Alder Lake
mobile CPUs.
The same change is required for other Alder Lake-N and Raptor Lake-P
mobile CPUs as the current default of 6 results in higher uncore power
consumption. This increase in power is related to memory clock
frequency setting based on the EPB value.
Depending on the EPB the minimum memory frequency is set by the
firmware. At EPB = 7, the minimum memory frequency is 1/4th compared to
EPB = 6. This results in significant power saving for idle and
semi-idle workload on a Chrome platform.
For example Change in power and performance from EPB change from 6 to 7
on Alder Lake-N:
Workload Performance diff (%) power diff
----------------------------------------------------
VP9 FHD30 0 (FPS) -218 mw
Google meet 0 (FPS) -385 mw
This 200+ mw power saving is very significant for mobile platform for
battery life and thermal reasons.
But as the workload demands more memory bandwidth, the memory frequency
will be increased very fast. There is no power savings for such busy
workloads.
For example:
Workload Performance diff (%) from EPB 6 to 7
-------------------------------------------------------
Speedometer 2.0 -0.8
WebGL Aquarium 10K
Fish -0.5
Unity 3D 2018 0.2
WebXPRT3 -0.5
There are run to run variations for performance scores for
such busy workloads. So the difference is not significant.
Add a new define ENERGY_PERF_BIAS_NORMAL_POWERSAVE for EPB 7
and use it for Alder Lake-N and Raptor Lake-P mobile CPUs.
This modification is done originally by
Jeremy Compostella <jeremy.compostella@intel.com>.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/all/20221027220056.1534264-1-srinivas.pandruvada%40linux.intel.com
|
|
The Cyrix CPU specific MTRR function cyrix_set_all() will never be
called as the mtrr_ops->set_all() callback will only be called in the
use_intel() case, which would require the use_intel_if member of struct
mtrr_ops to be set, which isn't the case for Cyrix.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221004081023.32402-3-jgross@suse.com
|
|
Add a comment about set_mtrr_state() needing serialization.
[ bp: Touchups. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220820092533.29420-2-jgross@suse.com
|
|
Those mitigations are very talkative; use the printing helper which pays
attention to the buffer size.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220809153419.10182-1-bp@alien8.de
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
when using bperf (perf BPF based counters) with cgroups.
- Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
monitors bandwidth, latency, bus utilization and buffer occupancy.
Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.
- User space tasks can migrate between CPUs, so when tracing selected
CPUs, system-wide sideband is still needed, fix it in the setup of
Intel PT on hybrid systems.
- Fix metricgroups title message in 'perf list', it should state that
the metrics groups are to be used with the '-M' option, not '-e'.
- Sync the msr-index.h copy with the kernel sources, adding support for
using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well
as decoding it when printing the MSR tracepoint arguments.
- Fix program header size and alignment when generating a JIT ELF in
'perf inject'.
- Add multiple new Intel PT 'perf test' entries, including a jitdump
one.
- Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
running on PowerPC due to an invalid topology number in that arch.
- Fix the 'perf test' for arm_coresight failures on the ARM Juno
system.
- Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this
option to the or expression expected in the intercepted
perf_event_open() syscall.
- Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the
'perf annotate' asm parser.
- Fix 'perf mem record -C' option processing, it was being chopped up
when preparing the underlying 'perf record -e mem-events' and thus
being ignored, requiring using '-- -C CPUs' as a workaround.
- Improvements and tidy ups for 'perf test' shell infra.
- Fix Intel PT information printing segfault in uClibc, where a NULL
format was being passed to fprintf.
* tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
perf tests stat+json_output: Include sanity check for topology
perf tests stat+csv_output: Include sanity check for topology
perf intel-pt: Fix system_wide dummy event for hybrid
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
perf test: Fix attr tests for PERF_FORMAT_LOST
perf test: test_intel_pt.sh: Add 9 tests
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
perf test: test_intel_pt.sh: Add jitdump test
perf test: test_intel_pt.sh: Tidy some alignment
perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
perf test: test_intel_pt.sh: Tidy some perf record options
perf test: test_intel_pt.sh: Fix return checking again
perf: Skip and warn on unknown format 'configN' attrs
perf list: Fix metricgroups title message
perf mem: Fix -C option behavior for perf mem record
perf annotate: Add missing condition flags for arm64
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the
combination of Clang >= 14 and GAS <= 2.35.
- Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
the package size.
- Fix modpost error under build environments using musl.
- Make *.ll files keep value names for easier debugging
- Fix single directory build
- Prevent RISC-V from selecting the broken DWARF5 support when Clang
and GAS are used together.
* tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
kbuild: fix single directory build
kbuild: add -fno-discard-value-names to cmd_cc_ll_c
scripts/clang-tools: Convert clang-tidy args to list
modpost: put modpost options before argument
kbuild: Stop including vmlinux.bz2 in the rpm's
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"This is the final part of the clk patches for this merge window.
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top
to make sure it doesn't break so easily again. The majority of the
series fixes up how the clk_set_rate_*() APIs work, particularly
around when the rate constraints are dropped and how they move around
when reparenting clks. Overall it's a much needed improvement to the
clk rate range APIs that used to be pretty broken if you looked
sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that
the system actually boots on the affected devices"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
clk: tegra: Fix Tegra PWM parent clock
clk: at91: fix the build with binutils 2.27
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
...
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- fix a regression in guest mounts to old servers
- improvements to directory leasing (caching directory entries safely
beyond the root directory)
- symlink improvement (reducing roundtrips needed to process symlinks)
- an lseek fix (to problem where some dir entries could be skipped)
- improved ioctl for returning more detailed information on directory
change notifications
- clarify multichannel interface query warning
- cleanup fix (for better aligning buffers using ALIGN and round_up)
- a compounding fix
- fix some uninitialized variable bugs found by Coverity and the kernel
test robot
* tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve SMB3 change notification support
cifs: lease key is uninitialized in two additional functions when smb1
cifs: lease key is uninitialized in smb1 paths
smb3: must initialize two ACL struct fields to zero
cifs: fix double-fault crash during ntlmssp
cifs: fix static checker warning
cifs: use ALIGN() and round_up() macros
cifs: find and use the dentry for cached non-root directories also
cifs: enable caching of directories for which a lease is held
cifs: prevent copying past input buffer boundaries
cifs: fix uninitialised var in smb2_compound_op()
cifs: improve symlink handling for smb2+
smb3: clarify multichannel warning
cifs: fix regression in very old smb1 mounts
cifs: fix skipping to incorrect offset in emit_cached_dirents
|
|
This reverts commit 78e5a3399421 ("cpumask: fix checking valid cpu range").
syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit 78e5a3399421 ("cpumask: fix checking
valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE()
when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.
Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately. As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].
Andrew Jones proposed a fix for x86 and riscv architectures [4]. But
[2] and [5] indicate that affected locations are not limited to arch
code. More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.
We should have inspected and fixed basically all cpumask users before
applying that patch. We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.
Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1]
Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2]
Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3]
Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com [4]
Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5]
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When building with a RISC-V kernel with DWARF5 debug info using clang
and the GNU assembler, several instances of the following error appear:
/tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported
Dumping the .s file reveals these .uleb128 directives come from
.debug_loc and .debug_ranges:
.Ldebug_loc0:
.byte 4 # DW_LLE_offset_pair
.uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp1-.Lfunc_begin0 # ending offset
.byte 1 # Loc expr size
.byte 90 # DW_OP_reg10
.byte 0 # DW_LLE_end_of_list
.Ldebug_ranges0:
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp6-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp27-.Lfunc_begin0 # ending offset
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp28-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp30-.Lfunc_begin0 # ending offset
.byte 0 # DW_RLE_end_of_list
There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.
To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
Link: https://github.com/ClangBuiltLinux/linux/issues/1719
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit f110e5a250e3 ("kbuild: refactor single builds of *.ko") was wrong.
KBUILD_MODULES _is_ needed for single builds.
Otherwise, "make foo/bar/baz/" does not build module objects at all.
Fixes: f110e5a250e3 ("kbuild: refactor single builds of *.ko")
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab hotfix from Vlastimil Babka:
"A single fix for the common-kmalloc series, for warnings on mips and
sparc64 reported by Guenter Roeck"
* tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
|
|
Pull OpenRISC updates from Stafford Horne:
"I have relocated to London so not much work from me while I get
settled.
Still, OpenRISC picked up two patches in this window:
- Fix for kernel page table walking from Jann Horn
- MAINTAINER entry cleanup from Palmer Dabbelt"
* tag 'for-linus' of https://github.com/openrisc/linux:
MAINTAINERS: git://github -> https://github.com for openrisc
openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert the attempt to distribute spare resources to unconfigured
hotplug bridges at boot time.
This fixed some dock hot-add scenarios, but Jonathan Cameron reported
that it broke a topology with a multi-function device where one
function was a Switch Upstream Port and the other was an Endpoint"
* tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Distribute available resources for root buses, too"
|
|
After commit d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than
order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2)
requests to buddy like SLUB does.
SLAB has been using kmalloc caches to allocate freelist_idx_t array for
off slab caches. But after the commit, freelist_size can be bigger than
KMALLOC_MAX_CACHE_SIZE.
Instead of using pointer to kmalloc cache, use kmalloc_node() and only
check if the kmalloc cache is off slab during calculate_slab_order().
If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens
as it allocates freelist_idx_t array directly from buddy.
Link: https://lore.kernel.org/all/20221014205818.GA1428667@roeck-us.net/
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Change notification is a commonly supported feature by most servers,
but the current ioctl to request notification when a directory is
changed does not return the information about what changed
(even though it is returned by the server in the SMB3 change
notify response), it simply returns when there is a change.
This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify
information structure which includes the name of the file(s) that
changed and why. See MS-SMB2 2.2.35 for details on the individual
filter flags and the file_notify_information structure returned.
To use this simply pass in the following (with enough space
to fit at least one file_notify_information structure)
struct __attribute__((__packed__)) smb3_notify {
uint32_t completion_filter;
bool watch_tree;
uint32_t data_len;
uint8_t data[];
} __packed;
using CIFS_IOC_NOTIFY_INFO 0xc009cf0b
or equivalently _IOWR(CIFS_IOCTL_MAGIC, 11, struct smb3_notify_info)
The ioctl will block until the server detects a change to that
directory or its subdirectories (if watch_tree is set).
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized
in smb1 mounts. It is cleaner to set lease key to zero in these
places where leases are not supported (smb1 can not return lease keys
so the field was uninitialized).
Addresses-Coverity: 1514207 ("Uninitialized scalar variable")
Addresses-Coverity: 1514331 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It is cleaner to set lease key to zero in the places where leases are not
supported (smb1 can not return lease keys so the field was uninitialized).
Addresses-Coverity: 1513994 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity spotted that we were not initalizing Stbz1 and Stbz2 to
zero in create_sd_buf.
Addresses-Coverity: 1513848 ("Uninitialized scalar variable")
Cc: <stable@vger.kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The crash occurred because we were calling memzero_explicit() on an
already freed sess_data::iov[1] (ntlmsspblob) in sess_free_buffer().
Fix this by not calling memzero_explicit() on sess_data::iov[1] as
it's already by handled by callers.
Fixes: a4e430c8c8ba ("cifs: replace kfree() with kfree_sensitive() for sensitive data")
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
To pick up the changes in:
b8d1d163604bd1e6 ("x86/apic: Don't disable x2APIC if locked")
ca5b7c0d9621702e ("perf/x86/amd/lbr: Add LbrExtV2 branch record support")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2022-10-14 18:06:34.294561729 -0300
+++ after 2022-10-14 18:06:41.285744044 -0300
@@ -264,6 +264,7 @@
[0xc0000102 - x86_64_specific_MSRs_offset] = "KERNEL_GS_BASE",
[0xc0000103 - x86_64_specific_MSRs_offset] = "TSC_AUX",
[0xc0000104 - x86_64_specific_MSRs_offset] = "AMD64_TSC_RATIO",
+ [0xc000010e - x86_64_specific_MSRs_offset] = "AMD64_LBR_SELECT",
[0xc000010f - x86_64_specific_MSRs_offset] = "AMD_DBG_EXTN_CFG",
[0xc0000300 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS",
[0xc0000301 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_CTL",
$
Now one can trace systemwide asking to see backtraces to where that MSR
is being read/written, see this example with a previous update:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
^C#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
Using CPUID AuthenticAMD-25-21-0
0x6a0
0x6a8
New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
0x6a0
0x6a8
New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/lkml/Y0nQkz2TUJxwfXJd@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support for using 'perf report --dump-raw-trace' to parse PTT packet.
Example usage:
Output will contain raw PTT data and its textual representation, such
as (8DW format):
0 0 0x5810 [0x30]: PERF_RECORD_AUXTRACE size: 0x400000 offset: 0
ref: 0xa5d50c725 idx: 0 tid: -1 cpu: 0
.
. ... HISI PTT data: size 4194304 bytes
. 00000000: 00 00 00 00 Prefix
. 00000004: 08 20 00 60 Header DW0
. 00000008: ff 02 00 01 Header DW1
. 0000000c: 20 08 00 00 Header DW2
. 00000010: 10 e7 44 ab Header DW3
. 00000014: 2a a8 1e 01 Time
. 00000020: 00 00 00 00 Prefix
. 00000024: 01 00 00 60 Header DW0
. 00000028: 0f 1e 00 01 Header DW1
. 0000002c: 04 00 00 00 Header DW2
. 00000030: 40 00 81 02 Header DW3
. 00000034: ee 02 00 00 Time
....
This patch only add basic parsing support according to the definition of
the PTT packet described in Documentation/trace/hisi-ptt.rst. And the
fields of each packet can be further decoded following the PCIe Spec's
definition of TLP packet.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi6124@gmail.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zeng Prime <prime.zeng@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20220927081400.14364-4-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
HiSilicon PCIe tune and trace device (PTT) could dynamically tune the
PCIe link's events, and trace the TLP headers).
This patch add support for PTT device in perf tool, so users could use
'perf record' to get TLP headers trace data.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi6124@gmail.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zeng Prime <prime.zeng@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20220927081400.14364-3-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add find_pmu_for_event() and use to simplify logic in
auxtrace_record_init(). find_pmu_for_event() will be reused in
subsequent patches.
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi6124@gmail.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zeng Prime <prime.zeng@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20220927081400.14364-2-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Testcase stat+json_output.sh fails in powerpc:
86: perf stat JSON output linter : FAILED!
The testcase "stat+json_output.sh" verifies perf stat JSON output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes: 0c343af2a2f82844 ("perf test: JSON format checking")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221006155149.67205-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Testcase stat+csv_output.sh fails in powerpc:
84: perf stat CSV output linter: FAILED!
The testcase "stat+csv_output.sh" verifies perf stat CSV output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes: 7473ee56dbc91c98 ("perf test: Add checking for perf stat CSV output.")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221006155149.67205-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
User space tasks can migrate between CPUs, so when tracing selected CPUs,
system-wide sideband is still needed, however evlist->core.has_user_cpus
is not set in the hybrid case, so check the target cpu_list instead.
Fixes: 7d189cadbeebc778 ("perf intel-pt: Track sideband system-wide when needed")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221012082259.22394-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
uClibc segfaulted because NULL was passed as the format to fprintf().
That happened because one of the format strings was missing and
intel_pt_print_info() didn't check that before calling fprintf().
Add the missing format string, and check format is not NULL before calling
fprintf().
Fixes: 11fa7cb86b56d361 ("perf tools: Pass Intel PT information for decoding MTC and CYC")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221012082259.22394-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since PERF_FORMAT_LOST was added, the default read format has that bit
set, so add it to the tests. Keep the old value as well so that the test
still passes on older kernels.
This fixes the following failure:
expected read_format=0|4, got 20
FAILED './tests/attr/test-record-C0' - match failure
Fixes: 85b425f31c8866e0 ("perf record: Set PERF_FORMAT_LOST by default")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221012094633.21669-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add tests:
Test with MTC and TSC disabled
Test with branches disabled
Test with/without CYC
Test recording with sample mode
Test with kernel trace
Test virtual LBR
Test power events
Test with TNT packets disabled
Test with event_trace
These tests mostly check that perf record works with the corresponding
Intel PT config terms, sometimes also checking that certain packets do or
do not appear in the resulting trace as appropriate.
The "Test virtual LBR" is slightly trickier, using a Python script to
check that branch stacks are actually synthesized.
Signed-off-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-8-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When a program header was added, it moved the text section but
GEN_ELF_TEXT_OFFSET was not updated.
Fix by adding the program header size and aligning.
Fixes: babd04386b1df8c3 ("perf jit: Include program header in ELF files")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lieven Hey <lieven.hey@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test for decoding self-modifying code using a jitdump file.
The test creates a workload that uses self-modifying code and generates its
own jitdump file. The result is processed with perf inject --jit and
checked for decoding errors.
Note the test will fail without patch "perf inject: Fix GEN_ELF_TEXT_OFFSET
for jit" applied.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Tidy alignment of test function lines to make them more readable.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Messages display with the perf test -v option. Add a message to show when
skipping a test because the user cannot do kernel tracing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When not decoding, the options "-B -N --no-bpf-event" speed up perf record.
Make a common function for them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
count_result() does not always reset ret=0 which means the value can spill
into the next test result.
Fix by explicitly setting it to zero between tests.
Committer testing:
# perf test "Miscellaneous Intel PT testing"
110: Miscellaneous Intel PT testing : Ok
#
Tested as well with:
# perf test -v "Miscellaneous Intel PT testing"
Fixes: fd9b45e39cfaf885 ("perf test: test_intel_pt.sh: Fix return checking")
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Dan Williams:
"Some small cleanups and fixes in and around the nvdimm subsystem. The
most significant change is a regression fix for nvdimm namespace
(volume) creation when the namespace size is smaller than 2MB/
Summary:
- Fix nvdimm namespace creation on platforms that do not publish
associated 'DIMM' metadata for a persistent memory region.
- Miscellaneous fixes and cleanups"
* tag 'libnvdimm-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
ACPI: HMAT: Release platform device in case of platform_device_add_data() fails
dax: Remove usage of the deprecated ida_simple_xxx API
libnvdimm/region: Allow setting align attribute on regions without mappings
nvdimm/namespace: Fix comment typo
nvdimm: make __nvdimm_security_overwrite_query static
nvdimm/region: Fix kernel-doc
nvdimm/namespace: drop unneeded temporary variable in size_store()
nvdimm/namespace: return uuid_null only once in nd_dev_to_uuid()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A great rework of the isl12022 driver makes up the bulk of the
changes. There is also an important fix for CMOS and then the usual
small fixes:
- switch to devm_clk_get_enabled() where relevant
- cmos: event handler registration fix
- isl12022: code improvements"
* tag 'rtc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rv3028: Fix codestyle errors
rtc: cmos: Fix event handler registration ordering issue
rtc: k3: Use devm_clk_get_enabled() helper
rtc: jz4740: Use devm_clk_get_enabled() helper
rtc: mpfs: Use devm_clk_get_enabled() helper
rtc: ds1685: Fix spelling of function name in comment block
rtc: isl12022: switch to using regmap API
rtc: isl12022: drop redundant write to HR register
rtc: isl12022: use dev_set_drvdata() instead of i2c_set_clientdata()
rtc: isl12022: use %ptR
rtc: isl12022: simplify some expressions
rtc: isl12022: drop a dev_info()
rtc: isl12022: specify range_min and range_max
rtc: isl12022: stop using deprecated devm_rtc_device_register()
rtc: stmp3xxx: Add failure handling for stmp3xxx_wdt_register()
rtc: mxc: Use devm_clk_get_enabled() helper
rtc: gamecube: Always reset HW_SRNPROT after read
rtc: k3: detect SoC to determine erratum fix
rtc: k3: wait until the unlock field is not zero
rtc: mpfs: Remove printing of stray CR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Not much this cycle, only two fixes for a rare event"
- fix device reattach issues"
* tag 'i3c/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Remove the wrong place of reattach.
i3c: master: Free the old_dyn_addr when reattach.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Use bitmap API to allocate bitmaps
- New attach mode, disable_fm, to attach without fastmap
- Fixes for various typos in comments
UBIFS:
- Fix for a deadlock when setting xattrs for encrypted file
- Fix for an assertion failures when truncating encrypted files
- Fixes for various typos in comments"
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: fastmap: Add fastmap control support for 'UBI_IOCATT' ioctl
ubi: fastmap: Use the bitmap API to allocate bitmaps
ubifs: Fix AA deadlock when setting xattr for encrypted file
ubifs: Fix UBIFS ro fail due to truncate in the encrypted directory
mtd: ubi: drop unexpected word 'a' in comments
ubi: block: Fix typos in comments
ubi: fastmap: Fix typo in comments
ubi: Fix repeated words in comments
ubi: ubi-media.h: Fix comment typo
ubi: block: Remove in vain semicolon
ubifs: Fix ubifs_check_dir_empty() kernel-doc comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Move to strscpy()
- Improve panic notifiers
- Fix NR_CPUS usage
- Fixes for various comments
- Fixes for virtio driver
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
uml: Remove the initialization of statics to 0
um: Do not initialise statics to 0.
um: Fix comment typo
um: Improve panic notifiers consistency and ordering
um: remove unused reactivate_chan() declaration
um: mmaper: add __exit annotations to module exit funcs
um: virt-pci: add __init/__exit annotations to module init/exit funcs
hostfs: move from strlcpy with unused retval to strscpy
um: move from strlcpy with unused retval to strscpy
um: increase default virtual physical memory to 64 MiB
UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
um: read multiple msg from virtio slave request fd
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"A last-minute arch/alpha regression fix: the previous asm-generic
branch contained a new regression from a typo"
* tag 'asm-generic-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
alpha: fix marvel_ioread8 build regression
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are three fixes for build warnings that came in during the merge
window"
* tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: mmp: Make some symbols static
ARM: spear6xx: Staticize few definitions
clk: spear: Move prototype to accessible header
|
|
- Various clk rate range fixes
- Drop clk rate range constraints on clk_put() (redux)
* clk-rate-range: (28 commits)
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
clk: tests: Add some tests for orphan with multiple parents
clk: tests: Add tests for mux with multiple parents
clk: tests: Add tests for single parent mux
...
|
|
Commit 8c193f4714df ("pwm: tegra: Optimize period calculation") updated
the period calculation in the Tegra PWM driver and now returns an error
if the period requested is less than minimum period supported. This is
breaking PWM support on various Tegra platforms. For example, on the
Tegra210 Jetson Nano platform this is breaking the PWM fan support and
probing the PWM fan driver now fails ...
pwm-fan pwm-fan: Failed to configure PWM: -22
pwm-fan: probe of pwm-fan failed with error -22
The problem is that the default parent clock for the PWM on Tegra210 is
a 32kHz clock and is unable to support the requested PWM period.
Fix PWM support on Tegra20, Tegra30, Tegra114, Tegra124 and Tegra210 by
updating the parent clock for the PWM to be the PLL_P.
Fixes: 8c193f4714df ("pwm: tegra: Optimize period calculation")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # TF101 T20
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # TF201 T30
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # TF700T T3
Link: https://lore.kernel.org/r/20221010100046.6477-1-jonathanh@nvidia.com
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
There is an issue when build with older versions of binutils 2.27.0,
arch/arm/mach-at91/pm_suspend.S: Assembler messages:
arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL'
Use UL() macro to fix the issue in assembly file.
Fixes: 4fd36e458392 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20221012030635.13140-1-wangkefeng.wang@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
