summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-03-21ipv6: convert temporary address list to list macrosstephen hemminger2-20/+14
Use list macros instead of open coded linked list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21Merge branch 'master' of ↵David S. Miller37-184/+346
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-03-21Merge branch 'vhost' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostDavid S. Miller2-10/+18
2010-03-21netfilter: ctnetlink: fix reliable event delivery if message building failsPablo Neira Ayuso3-4/+6
This patch fixes a bug that allows to lose events when reliable event delivery mode is used, ie. if NETLINK_BROADCAST_SEND_ERROR and NETLINK_RECV_NO_ENOBUFS socket options are set. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21netlink: fix NETLINK_RECV_NO_ENOBUFS in netlink_set_err()Pablo Neira Ayuso2-4/+15
Currently, ENOBUFS errors are reported to the socket via netlink_set_err() even if NETLINK_RECV_NO_ENOBUFS is set. However, that should not happen. This fixes this problem and it changes the prototype of netlink_set_err() to return the number of sockets that have set the NETLINK_RECV_NO_ENOBUFS socket option. This return value is used in the next patch in these bugfix series. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21NET_DMA: free skbs periodicallySteven J. Magnani1-20/+43
Under NET_DMA, data transfer can grind to a halt when userland issues a large read on a socket with a high RCVLOWAT (i.e., 512 KB for both). This appears to be because the NET_DMA design queues up lots of memcpy operations, but doesn't issue or wait for them (and thus free the associated skbs) until it is time for tcp_recvmesg() to return. The socket hangs when its TCP window goes to zero before enough data is available to satisfy the read. Periodically issue asynchronous memcpy operations, and free skbs for ones that have completed, to prevent sockets from going into zero-window mode. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20netlink: fix unaligned access in nla_get_be64()Pablo Neira Ayuso1-1/+5
This patch fixes a unaligned access in nla_get_be64() that was introduced by myself in a17c859849402315613a0015ac8fbf101acf0cc1. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20tcp: Fix tcp_mark_head_lost() with packets == 0Lennart Schulte1-0/+3
A packet is marked as lost in case packets == 0, although nothing should be done. This results in a too early retransmitted packet during recovery in some cases. This small patch fixes this issue by returning immediately. Signed-off-by: Lennart Schulte <lennart.schulte@nets.rwth-aachen.de> Signed-off-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20net: ipmr/ip6mr: fix potential out-of-bounds vif_table accessPatrick McHardy2-0/+6
mfc_parent of cache entries is used to index into the vif_table and is initialised from mfcctl->mfcc_parent. This can take values of to 2^16-1, while the vif_table has only MAXVIFS (32) entries. The same problem affects ip6mr. Refuse invalid values to fix a potential out-of-bounds access. Unlike the other validity checks, this is checked in ipmr_mfc_add() instead of the setsockopt handler since its unused in the delete path and might be uninitialized. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20KS8695: update ksp->next_rx_desc_read at the end of rx loopYegor Yefremov1-15/+9
There is no need to adjust the next rx descriptor after each packet, so do it only once at the end of the routine. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2010-03-20igb: Add support for 82576 ET2 Quad Port Server AdapterCarolyn Wyborny3-0/+3
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ixgbevf: Message formatting cleanupsGreg Rose1-2/+2
Clean up some text output formatting. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ixgbevf: Shorten up delay timer for watchdog taskGreg Rose1-1/+1
The recovery from PF reset works better when you shorten up the delay until the watchdog task executes. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ixgbevf: Fix VF Stats accounting after resetGreg Rose3-38/+78
The counters in the 82599 Virtual Function are not clear on read. They accumulate to the maximum value and then roll over. They are also not cleared when the VF executes a soft reset, so it is possible they are non-zero when the driver loads and starts. This has all been accounted for in the code that keeps the stats up to date but there is one case that is not. When the PF driver is reset the counters in the VF are all reset to zero. This adds an additional accounting overhead into the VF driver when the PF is reset under its feet. This patch adds additional counters that are used by the VF driver to accumulate and save stats after a PF reset has been detected. Prior to this patch displaying the stats in the VF after the PF has reset would show bogus data. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ixgbe: Set IXGBE_RSC_CB(skb)->DMA field to zero after unmapping the addressMallikarjuna R Chilakala1-2/+6
As per Simon Horman's feedback set IXGBE_RSC_CB(skb)->dma to zero after unmapping HWRSC DMA address to avoid double freeing. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ixgbe: fix for real_num_tx_queues update issueVasu Dev1-3/+3
Currently netdev_features_change is called before fcoe tx queues setup is done, so this patch moves calling of netdev_features_change after tx queues setup is done in ixgbe_init_interrupt_scheme, so that real_num_tx_queues is updated correctly on each fcoe enable or disable. This allows additional fcoe queues updated correctly in vlan driver for their correct queue selection. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20TCP: check min TTL on received ICMP packetsstephen hemminger1-0/+5
This adds RFC5082 checks for TTL on received ICMP packets. It adds some security against spoofed ICMP packets disrupting GTSM protected sessions. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ipv6: Remove redundant dst NULL check in ip6_dst_checkHerbert Xu1-1/+1
As the only path leading to ip6_dst_check makes an indirect call through dst->ops, dst cannot be NULL in ip6_dst_check. This patch removes this check in case it misleads people who come across this code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ipv4: check rt_genid in dst_checkTimo Teräs1-4/+10
Xfrm_dst keeps a reference to ipv4 rtable entries on each cached bundle. The only way to renew xfrm_dst when the underlying route has changed, is to implement dst_check for this. This is what ipv6 side does too. The problems started after 87c1e12b5eeb7b30b4b41291bef8e0b41fc3dde9 ("ipsec: Fix bogus bundle flowi") which fixed a bug causing xfrm_dst to not get reused, until that all lookups always generated new xfrm_dst with new route reference and path mtu worked. But after the fix, the old routes started to get reused even after they were expired causing pmtu to break (well it would occationally work if the rtable gc had run recently and marked the route obsolete causing dst_check to get called). Signed-off-by: Timo Teras <timo.teras@iki.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19smsc95xx: Fix tx checksum offload for small packetsSteve Glendinning1-3/+15
TX checksum offload does not work properly when transmitting UDP packets with 0, 1 or 2 bytes of data. This patch works around the problem by calculating checksums for these packets in the driver. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbe: Fix 82599 KX4 Wake on LAN issue after an improper system shutdownMallikarjuna R Chilakala1-3/+0
Advanced Power Management is disabled for 82599 KX4 connections by clearing GRC.APME bit, causing it to not wake the system from an improper system shutdown. By default GRC.APME is enabled and software is not supposed to clear these settings during adapter probe. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbe: Fix 82599 multispeed fiber link issues due to Tx laser flappingMallikarjuna R Chilakala3-36/+54
Fix 82599 link issues during driver load and unload test using multi-speed 10G & 1G fiber modules. When connected back to back sometime 82599 multispeed fiber modules would link at 1G speed instead of 10G highest speed, due to a race condition in autotry process involving Tx laser flapping. Move autotry autoneg-37 tx laser flapping process from multispeed module init setup to driver unload. This will alert the link partner to restart its autotry process when it tries to establish the link with the link partner Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19enic: Clean up: Change driver description; Fix tab space; Update MAINTAINERSVasanthy Kolluri4-6/+7
1) Change enic driver description to "Cisco VIC Ethernet NIC Driver" 2) Fix tab space 3) Update MAINTAINERS list Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19enic: Clean up: Add wrapper functionsVasanthy Kolluri2-11/+44
Add wrapper functions vnic_dev_notify_setcmd and vnic_dev_notify_unsetcmd for firmware notify commands. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19enic: Do not advertise NETIF_F_HW_VLAN_RXVasanthy Kolluri1-2/+1
Hardware does not honor vlan filters from the host and so the driver does not need to advertise this. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19enic: Bug Fix: Fix timeout for hardware Tx and Rx queue disable operationsVasanthy Kolluri2-4/+4
The timeout for hardware Tx and Rx queue disable operations is increased to work-around an erratum for "unnamed" chipset where a DMA completion may take upto 10ms. We have to wait atleast this long for hardware to signal that Tx and Rx queues are quiesced. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19enic: Bug Fix: Fix hardware descriptor readsVasanthy Kolluri2-5/+9
The last bit written to a completion descriptor by hardware is the color bit. Driver must read all other descriptor fields only after reading the color bit to avoid reading stale descriptor fields. There is a rmb() after reading the color bit to avoid any compiler/cpu reordering of the reads. The color bit is the generation bit that toggles each pass through the completion descriptor ring. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19Merge branch 'master' of ↵David S. Miller3-22/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-03-19net: Potential null skb->dev dereferenceEric Dumazet3-9/+11
When doing "ifenslave -d bond0 eth0", there is chance to get NULL dereference in netif_receive_skb(), because dev->master suddenly becomes NULL after we tested it. We should use ACCESS_ONCE() to avoid this (or rcu_dereference()) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19jme: Advance driver version numberGuo-Fu Tseng1-1/+1
Advance driver version number after some bug fix. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19jme: Protect vlgrp structure by pause RX actions.Guo-Fu Tseng1-0/+33
Temporary stop the RX IRQ, and disable (sync) tasklet or napi. And restore it after finished the vlgrp pointer assignment. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19jme: Fix VLAN memory leakGuo-Fu Tseng1-0/+2
Fix memory leak while receiving 8021q tagged packet which is not registered by user. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19KS8851: Avoid NULL pointer in set rx modeAbraham Arce1-1/+0
Kernel NULL pointer dereference when setting mode for IFF_MULTICAST. Tested on SDP OMAP4430 board. ks8851 spi1.0: message enable is 0 ks8851 spi1.0: revision 0, MAC f2:f4:2f:56:37:de, IRQ 194 Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.34-rc1-01039-g38d7ed1-dirty #3) PC is at ks8851_set_rx_mode+0x88/0x124 LR is at bitrev32+0x24/0x2c <snip> Backtrace: [<c01bfbd8>] ? (ks8851_set_rx_mode+0x0/0x124) [<c01d4164>] (__dev_set_rx_mode+0x0/0x90) [<c01dc460>] (dev_mc_add+0x0/0x78) [<c021f0bc>] (igmp_group_added+0x0/0x64) [<c021f174>] (ip_mc_inc_group+0x0/0x150) [<c021f3b8>] (ip_mc_up+0x0/0x64) [<c0219eb0>] (inetdev_event+0x0/0x3d4) [<c0066818>] (notifier_call_chain+0x0/0x78) [<c00668b8>] (__raw_notifier_call_chain+0x0/0x24) [<c00668dc>] (raw_notifier_call_chain+0x0/0x28) [<c01d7484>] (call_netdevice_notifiers+0x0/0x24) [<c01d7780>] (__dev_notify_flags+0x0/0x68) [<c01d77e8>] (dev_change_flags+0x0/0x4c) [<c001f0bc>] (ip_auto_config+0x0/0xf1c) [<c0028490>] (do_one_initcall+0x0/0x1bc) [<c00084dc>] (kernel_init+0x0/0x234) Code: e15130bc e1833012 e14130bc e5943000 (e5934000) ---[ end trace ed0fb00a94142792 ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19tcp: Fix OOB POLLIN avoidance.Alexandra Kossovsky1-1/+1
From: Alexandra.Kossovsky@oktetlabs.ru Fixes kernel bugzilla #15541 Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19net: remove unused #include <linux/version.h>Huang Weiyi1-1/+0
Remove unused #include <linux/version.h>('s) in drivers/net/ksz884x.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19net: forbid underlaying devices to change its typeJiri Pirko3-0/+11
It's not desired for underlaying devices to change type. At the time, there is for example possible to have bond with changed type from Ethernet to Infiniband as a port of a bridge. This patch fixes this. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19bonding: check return value of nofitier when changing typeJiri Pirko3-5/+12
This patch adds the possibility to refuse the bonding type change for other subsystems (such as for example bridge, vlan, etc.) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19net: rename notifier defines for netdev type changeJiri Pirko4-14/+16
Since generally there could be more netdevices changing type other than bonding, making this event type name "bonding-unrelated" Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19rps: Fixed build with CONFIG_SMP not enabled.Tom Herbert2-0/+26
Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18Net / e1000e: Fix build issue introduced by runtime PM patchRafael J. Wysocki1-59/+57
The recent PCI runtime PM patch broke build for CONFIG_PM_RUNTIME and CONFIG_PM_SLEEP undefined. Fix that by moving the PM callbacks under suitable #ifdefs. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18gigaset: fix build failureTilman Schmidt1-3/+11
Update the dummy LL interface to the LL interface change introduced by commit daab433c03c15fd642c71c94eb51bdd3f32602c8. This fixes the build failure occurring after that commit when enabling ISDN_DRV_GIGASET but neither ISDN_I4L nor ISDN_CAPI. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18vhost: fix error handling in vring ioctlsMichael S. Tsirkin1-6/+12
Stanse found a locking problem in vhost_set_vring: several returns from VHOST_SET_VRING_KICK, VHOST_SET_VRING_CALL, VHOST_SET_VRING_ERR with the vq->mutex held. Fix these up. Reported-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Laurent Chavey <chavey@google.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-03-17vhost: fix interrupt mitigation with raw socketsMichael S. Tsirkin1-1/+1
A thinko in code means we never trigger interrupt mitigation. Fix this. Reported-by: Juan Quintela <quintela@redhat.com> Reported-by: Unai Uribarri <unai.uribarri@optenet.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-03-17e1000e: Fix build with CONFIG_PM disabled.David S. Miller1-0/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17drivers/net/e100.c: Use pr_<level> and netif_<level>Joe Perches1-85/+98
Convert DPRINTK, commonly used for debugging, to netif_<level> Remove #define PFX Use #define pr_fmt Consistently use no periods for non-sentence logging messages Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17NET: Support clause 45 MDIO commands at the MDIO bus levelJason Gunthorpe3-15/+61
IEEE 802.3ae clause 45 specifies a somewhat modified MDIO protocol for use by 10GIGE phys. The main change is a 21 bit address split into a 5 bit device ID and a 16 bit register offset. The definition is designed so that normal and extended devices can run on the same MDIO bus. Extend mdio-bitbang to do the new protocol. At the MDIO bus level the protocol is requested by or'ing MII_ADDR_C45 into the register offset. Make phy_read/phy_write/etc pass a full 32 bit register offset. This does not attempt to make the phy layer support C45 style PHYs, just to provide the MDIO bus support. Tested against a Broadcom 10GE phy with ID 0x206034, and several Broadcom 10/100/1000 Phys in normal mode. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17e1000e / PCI / PM: Add basic runtime PM support (rev. 4)Rafael J. Wysocki2-27/+138
Use the PCI runtime power management framework to add basic PCI runtime PM support to the e1000e driver. Namely, make the driver suspend the device when the link is off and set it up for generating a wakeup event after the link has been detected again. [This feature is disabled until the user space enables it with the help of the /sys/devices/.../power/contol device attribute.] Based on a patch from Matthew Garrett. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17r8169 / PCI / PM: Add simplified runtime PM support (rev. 3)Rafael J. Wysocki1-27/+125
Use the PCI runtime power management framework to add basic PCI runtime PM support to the r8169 driver. Namely, make the driver suspend the device when the link is not present and set it up for generating a wakeup event after the link has been detected again. [This feature is disabled until the user space enables it with the help of the /sys/devices/.../power/contol device attribute.] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17net: convert multiple drivers to use netdev_for_each_mc_addr, part7Jiri Pirko5-41/+29
In mlx4, using char * to store mc address in private structure instead. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17drivers/net/ks*: Use netdev_<level>, netif_<level> and pr_<level>Joe Perches4-120/+91
I'm not sure this is correct. It changes logging macros from: dev_<level>(&ks->spidev->dev, to netdev_<level>(ks->netdev, Comments? Use netdev_<level> Use netif_<level> Use pr_<level> Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Add missing line to message in ks8851_remove Change kmalloc/memset(,0) to kzalloc Remove ks_<level> macros Consolidation code into set_media_state Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 23:47:42 +0300