summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2008-11-30Bluetooth: Fix format arguments warningMarcel Holtmann1-1/+1
Newer GCC versions are a little bit picky about how to deal with format arguments: net/bluetooth/hci_sysfs.c: In function ‘hci_register_sysfs’: net/bluetooth/hci_sysfs.c:418: warning: format not a string literal and no format arguments It is simple enough to fix and makes the compiler happy. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30Bluetooth: Enable per-module dynamic debug messagesMarcel Holtmann31-157/+11
With the introduction of CONFIG_DYNAMIC_PRINTK_DEBUG it is possible to allow debugging without having to recompile the kernel. This patch turns all BT_DBG() calls into pr_debug() to support dynamic debug messages. As a side effect all CONFIG_BT_*_DEBUG statements are now removed and some broken debug entries have been fixed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30Bluetooth: Allow SCO audio with Asus WL-BTD202 dongleMarcel Holtmann1-7/+8
This patch allows the Asus WL-BTD202 dongle to be used with a mono headset without having to specify "options btusb force_scofix=1". Based on a patch from Guillaume Bedot <littletux@zarb.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30Bluetooth: Send HCI Reset command by default on device initializationMarcel Holtmann6-57/+54
The Bluetooth subsystem was not using the HCI Reset command when doing device initialization. The Bluetooth 1.0b specification was ambiguous on how the device firmware was suppose to handle it. Almost every device was triggering a transport reset at the same time. In case of USB this ended up in disconnects from the bus. All modern Bluetooth dongles handle this perfectly fine and a lot of them actually require that HCI Reset is sent. If not then they are either stuck in their HID Proxy mode or their internal structures for inquiry and paging are not correctly setup. To handle old and new devices smoothly the Bluetooth subsystem contains a quirk to force the HCI Reset on initialization. However maintaining such a quirk becomes more and more complicated. This patch turns the logic around and lets the old devices disable the HCI Reset command. The only device where the HCI_QUIRK_NO_RESET is still needed are the original Digianswer devices and dongles with an early CSR firmware. CSR reported that they fixed this for version 12 firmware. The last official release of version 11 firmware is build ID 115. The first version 12 candidate was build ID 117. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30Bluetooth: Remove deprecated hci_usb driverMarcel Holtmann4-1286/+0
The old hci_usb driver has been fully replaced with the new btusb driver and all major distributions switched to the new driver now. This removes it since it should not be used at all anymore. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30Bluetooth: Respect HCI_UART_DEBUG config in hci_ll.cNick Pelly1-0/+5
Following the pattern from hci_*.c, turn off BT_DBG messages unless they have been requested via HCI_UART_DEBUG Signed-off-by: Nick Pelly <npelly@google.com> Acked-by: Brian Swetland <swetland@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30Bluetooth: Change simple_strtol to simple_strtoulJulia Lawall1-4/+4
Since size, addr, fcs, and tmp are unsigned, it would seem better to use simple_strtoul that simple_strtol. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r2@ long e; position p; @@ e = simple_strtol@p(...) @@ position p != r2.p; type T; T e; @@ e = - simple_strtol@p + simple_strtoul (...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30Bluetooth: Fix warnings for bt_key_strings and bt_slock_key_stringsMarcel Holtmann1-18/+23
After adding proper lockdep annotations for Bluetooth protocols the case when lockdep is disabled produced two compiler warnings: net/bluetooth/af_bluetooth.c:60: warning: ‘bt_key_strings’ defined but not used net/bluetooth/af_bluetooth.c:71: warning: ‘bt_slock_key_strings’ defined but not used Fix both of them by adding a CONFIG_DEBUG_LOCK_ALLOC conditional around them and re-arranging the code a little bit. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30Bluetooth: Fix leak of uninitialized data to userspaceVegard Nossum1-1/+1
struct hci_dev_list_req { __u16 dev_num; struct hci_dev_req dev_req[0]; /* hci_dev_req structures */ }; sizeof(struct hci_dev_list_req) == 4, so the two bytes immediately following "dev_num" will never be initialized. When this structure is copied to userspace, these uninitialized bytes are leaked. Fix by using kzalloc() instead of kmalloc(). Found using kmemcheck. Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30Bluetooth: Fix TX error path in btsdio driverTomas Winkler1-0/+1
This patch fixes accumulating of the header in case packet was requeued in the error path. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30Bluetooth: Add suspend/resume support to btusb driverMarcel Holtmann1-0/+62
During suspend it is important that all URBs are cancelled and then on resume re-submitted. This gives initial suspend/resume support. Based on initial work from Oliver Neukum <oneukum@suse.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30Bluetooth: Handle bulk URBs in btusb driver from notify callbackMarcel Holtmann1-14/+13
With the addition of usb_unlink_anchored_urbs() it is possible to fully control the bulk URBs from the notify callback. There is no need to schedule work and so only do this for the ISOC URBs. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30Bluetooth: Add fine grained mem_flags usage to btusb driverMarcel Holtmann1-17/+17
The URB submission routines need more fine grained control for the mem_flags used by kmalloc(), usb_alloc_urb() and usb_submit_urb() to better support different caller situations. Add a mem_flags parameter and give the caller full control. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30gigaset: get rid of info() and warn() macrosTilman Schmidt6-17/+7
Join the move away from the obsolete info() macro, opencoding the remaining uses. While we're at it, also get rid of the warn() macro by promoting the three remaining uses to err(). Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-30gigaset: remove unnecessary poll methodTilman Schmidt1-15/+0
The N_GIGASET_M101 line discipline implemented by the ser_gigaset driver does not transfer any data from/to userspace through the tty interface. Therefore a poll method is not needed. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29cxgb3: Fix sparse warning and micro-optimize is_pure_response()Roland Dreier1-1/+1
The function is_pure_response() does "ntohl(var) & const" and then essentially just tests whether the result is 0 or not; this can be done more efficiently by computing "var & htonl(const)" instead and doing the byte swap at compile time instead of run time. This change slightly shrinks the compiled code; eg on x86-64 we save a couple of bswapl instructions: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-8 (-8) function old new delta t3_sge_intr_msix_napi 544 536 -8 and this also has the pleasant side effect of fixing a sparse warning: drivers/net/cxgb3/sge.c:2313:15: warning: restricted degrades to integer Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29phy: add the ST ste10Xp PHYsGiuseppe Cavallaro3-0/+144
This patch adds the STMicroelectronics ste10xp PHY device driver. It supports both the ste100p and the ste101p devices. Suspend/resume alredy added. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29phy: Add file missed in previous commit.David S. Miller1-0/+155
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29phy: power management supportGiuseppe Cavallaro3-5/+42
This patch adds the power management support into the physical abstraction layer. Suspend and resume functions respectively turns on/off the bit 11 into the PHY Basic mode control register. Generic PHY device starts supporting PM. In order to support the wake-on LAN and avoid to put in power down the PHY device, the MDIO is aware of what the Ethernet device wants to do. Voluntary, no CONFIG_PM defines were added into the sources. Also generic suspend/resume functions are exported to allow other drivers use them (such as genphy_config_aneg etc.). Within the phy_driver_register function, we need to remove the memset. It overrides the device driver owner and it is not good. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29phy: add natsemi PHY driverGiuseppe Cavallaro2-0/+6
This patch adds the PHY device driver for the National Semiconductor DP83865 Gig PHYTER. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29ne2: silence static never defined warningsIlpo Järvinen1-3/+0
These warning originate from 50014f1 (ne2: convert to net_device_ops) which did drop those functions. drivers/net/ne2.c:140: warning: 'ne_open' declared 'static' but never defined drivers/net/ne2.c:141: warning: 'ne_close' declared 'static' but never defined Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29bnx2: use net_device_stats nowadays available in net_deviceIlpo Järvinen2-3/+1
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29niu: use net_device_stats nowadays available in net_deviceIlpo Järvinen2-9/+8
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28pkt_sched: fix sparse warningHannes Eder1-1/+1
Impact: make global function static Fix the following sparse warning: net/sched/sch_api.c:192:14: warning: symbol 'qdisc_match_from_root' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28netlink: allow empty nested attributesPatrick McHardy1-0/+6
validate_nla() currently doesn't allow empty nested attributes. This makes userspace code unnecessarily complicated when starting and ending the nested attribute is done by generic upper level code and the inner attributes are dumped by a module. Add a special case to accept empty nested attributes. When the nested attribute is non empty, the same checks as before are performed. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28Merge branch 'master' of ↵David S. Miller40-221/+514
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6 Conflicts: net/netfilter/nf_conntrack_netlink.c
2008-11-28decnet: compile fix for removal of byteorder wrapperHarvey Harrison1-1/+1
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28ixgbe: section fixesAl Viro1-3/+2
ixgbe_init_interrupt_scheme() is called from ixgbe_resume(). Build that with CONFIG_PM and without CONFIG_HOTPLUG and you've got a problem. Several helpers called by it also are misannotated __devinit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28sctp: fix missing label when PROC_FS=nRandy Dunlap1-2/+3
Fix missing label when CONFIG_PROC_FS=n: net/sctp/protocol.c: In function 'sctp_proc_init': net/sctp/protocol.c:106: error: label 'out_nomem' used but not defined make[3]: *** [net/sctp/protocol.o] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27igb: Add support for pci-e Advanced Error ReportingAlexander Duyck1-10/+20
Add the calls necessary to enable advanced error reporting for igb on systems with AER enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27e100: cleanup link up/down messagesJeff Kirsher1-4/+6
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27ixgb: cleanup link up/down messagesJeff Kirsher1-3/+11
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27e1000: cleanup link up/down messagesJeff Kirsher1-5/+7
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27ixgbe: cleanup link up/down messagesJeff Kirsher1-10/+12
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27igb: link up/down messages must follow a specific formatAlexander Duyck1-3/+6
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27decnet: remove private wrappers of endian helpersHarvey Harrison10-94/+94
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27Merge branch 'master' of ↵David S. Miller31-85/+215
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/hp-plus.c drivers/net/wireless/ath5k/base.c drivers/net/wireless/ath9k/recv.c net/wireless/reg.c
2008-11-27cxgb3: Update FW loading path.Divy Le Ray1-2/+2
Update FW loading path to accomodate in-kernel images location Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27cxgb3: integrate FW and protocol engines in the kernelDivy Le Ray5-0/+2219
Include firmware and protocol images in the kernel image if requested Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27cxgb3: avoid potential memory leak.Divy Le Ray1-3/+2
Add consistency in alloc_ring() parameter checking to avoid potential memory leaks. alloc_ring() callers are correct fo far. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27cxgb3: set hard_xmit in the netdev_opsDivy Le Ray1-0/+1
Fix t3_eth_xmit() missing into the netdev_ops structure. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27Merge branch 'master' of ↵David S. Miller83-5991/+6608
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-11-27pkt_sched: gen_estimator: Optimize gen_estimator_active()Jarek Poplawski3-20/+13
Since all other gen_estimator functions use bstats and rate_est params together, and searching for them is optimized now, let's use this also in gen_estimator_active(). The return type of gen_estimator_active() is changed to bool, and gen_find_node() parameters to const, btw. In tcf_act_police_locate() a check for ACT_P_CREATED is added before calling gen_estimator_active(). Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26mac80211_hwsim: fix-up some print_mac merge damageJohn W. Linville1-8/+6
Some print_mac -> %pM conversions got lost in some merge or another... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26mac80211: fix unaligned access in ieee80211_wep_encrypt_dataIvan Kuten1-3/+4
Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26p54: fix wmm queue settingsChristian Lamparter1-2/+1
This patch fixes a regression (introduced by "p54: more definitions form lmac_longbow.h and pda.h") It turned out that the "ret" variable wasn't initialized and this caused the following warnings/errors to appear: wmaster1: failed to set TX queue parameters for queue 2 wmaster1: failed to set TX queue parameters for queue 3 wmaster1: failed to set TX queue parameters for queue 1 wmaster1: failed to set TX queue parameters for queue 0 Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Use proper TX channel width for setting channelsSujith4-69/+60
The TX channel width of the BSS can be obtained only after association. In all cases, default to HT20 if HT is enabled, and set chan width to HT40 only if the BSS supports it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Code scrubSujith8-1865/+1231
Merge core.c and base.c Remove Antenna Diversity (unused now). Remove unused chainmask handling code. Comment, indentation scrub. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26nl80211: Change max TX power to be in mBm instead of dBmJouni Malinen2-3/+4
In order to be consistent with NL80211_ATTR_POWER_RULE_MAX_EIRP, change NL80211_FREQUENCY_ATTR_MAX_TX_POWER to use mBm and U32 instead of dBm and U8. This is a userspace interface change, but the previous version had not yet been pushed upstream and there are no userspace programs using this yet, so there is justification to get this change in as long as it goes in before the previous version gets out. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Provide option to avoid unnecessary fw cachingDavid Kilroy3-0/+75
Make firmware caching on startup optional, and make it default. When the option is not selected and PM_SLEEP is configured, then cache firmware in the suspend pm_notifier. This configuration saves about 64k RAM in normal use, but can lead to a situation where the driver is configured to use a different firmware. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 04:27:46 +0300