summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-08-19ARM: dts: imx6: replace simple-bus by simple-mfd for anatopMarco Felsch1-1/+1
Replace it to fix the following DTC warnings: arch/arm/boot/dts/imx6qdl.dtsi:702.19-715.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-1p1: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:717.19-730.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-3p0: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:732.19-745.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-2p5: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:747.32-762.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddcore: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:764.29-779.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddpu: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:781.31-796.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddsoc: missing or empty reg/ranges property Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx6qdl-colibri: add phy to fecPhilippe Schenker1-0/+11
Add the phy-node and mdio bus to the fec-node, represented as is on hardware. This commit includes micrel,led-mode that is set to the default value, prepared for someone who wants to change this. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7-colibri: add recovery for I2C for iMX7Oleksandr Suvorov1-2/+23
- add recovery mode for applicable i2c buses for Colibri iMX7 module. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7-colibri: Add sleep pinctrl to ethernetPhilippe Schenker1-1/+18
Add sleep pinmux to the fec so it can properly sleep. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7-colibri: prepare module device tree for FlexCANPhilippe Schenker1-5/+30
Prepare FlexCAN use on SODIMM 55/63 178/188. Those SODIMM pins are compatible for CAN bus use with several modules from the Colibri family. Add Better drivestrength and also add flexcan2. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7-colibri: disable HS400Stefan Agner1-0/+1
Force HS200 by masking bit 63 of the SDHCI capability register. The i.MX ESDHC driver uses SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400. With that the stack checks bit 63 to descide whether HS400 is available. Using sdhci-caps-mask allows to mask bit 63. The stack then selects HS200 as operating mode. This prevents rare communication errors with minimal effect on performance: sdhci-esdhc-imx 30b60000.usdhc: warning! HS400 strobe DLL status REF not lock! Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7-colibri: make sure module supplies are always onMarcel Ziswiler1-0/+2
Prevent regulators from being switched off. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7d: cl-som-imx7: add compatible for phyAndré Draszik1-0/+2
While not strictly needed as "ethernet-phy-ieee802.3-c22" is assumed by default if not given explicitly, having the compatible string here makes it more clear what this is and which driver handles this - an Ethernet phy attached to mdio, handled by of_mdio.c Signed-off-by: André Draszik <git@andred.net> CC: Ilya Ledvich <ilya@compulab.co.il> CC: Igor Grinberg <grinberg@compulab.co.il> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Pengutronix Kernel Team <kernel@pengutronix.de> CC: Fabio Estevam <festevam@gmail.com> CC: NXP Linux Team <linux-imx@nxp.com> CC: devicetree@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7d: cl-som-imx7: make ethernet work againAndré Draszik1-2/+2
Recent changes to the atheros at803x driver caused ethernet to stop working on this board. In particular commit 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode") and commit cd28d1d6e52e ("net: phy: at803x: Disable phy delay for RGMII mode") fix the AR8031 driver to configure the phy's (RX/TX) delays as per the 'phy-mode' in the device tree. This now prevents ethernet from working on this board. It used to work before those commits, because the AR8031 comes out of reset with RX delay enabled, and the at803x driver didn't touch the delay configuration at all when "rgmii" mode was selected, and because arch/arm/mach-imx/mach-imx7d.c:ar8031_phy_fixup() unconditionally enables TX delay. Since above commits ar8031_phy_fixup() also has no effect anymore, and the end-result is that all delays are disabled in the phy, no ethernet. Update the device tree to restore functionality. Signed-off-by: André Draszik <git@andred.net> CC: Ilya Ledvich <ilya@compulab.co.il> CC: Igor Grinberg <grinberg@compulab.co.il> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Pengutronix Kernel Team <kernel@pengutronix.de> CC: Fabio Estevam <festevam@gmail.com> CC: NXP Linux Team <linux-imx@nxp.com> CC: devicetree@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx6ul: Add csi nodeSébastien Szymanski1-0/+9
Add csi node for i.MX6UL SoC. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12ARM: dts: imx25: mbimxsd25: native-mode is part of display-timingsMartin Kaiser1-1/+1
Move the native-mode property inside the display-timings node. According to Documentation/devicetree/bindings/display/panel/display-timing.txt. native-mode is a property of the display-timings node. If it's located outside of display-timings, the native-mode setting is ignored and the first display timing is used (which is a problem only if someone adds another display timing). Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12ARM: dts: apf27dev: native-mode is part of display-timingsMartin Kaiser1-1/+1
Move the native-mode property inside the display-timings node. According to Documentation/devicetree/bindings/display/panel/display-timing.txt. native-mode is a property of the display-timings node. If it's located outside of display-timings, the native-mode setting is ignored and the first display timing is used (which is a problem only if someone adds another display timing). Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12ARM: dts: edb7211: native-mode is part of display-timingsMartin Kaiser1-1/+1
Move the native-mode property inside the display-timings node. According to Documentation/devicetree/bindings/display/panel/display-timing.txt. native-mode is a property of the display-timings node. If it's located outside of display-timings, the native-mode setting is ignored and the first display timing is used (which is a problem only if someone adds another display timing). Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12ARM: dts: imx27-phytec-phycore-rdk: native-mode is part of display-timingsMartin Kaiser1-1/+1
Move the native-mode property inside the display-timings node. According to Documentation/devicetree/bindings/display/panel/display-timing.txt. native-mode is a property of the display-timings node. If it's located outside of display-timings, the native-mode setting is ignored and the first display timing is used (which is a problem only if someone adds another display timing). Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12ARM: dts: mbimxsd25: native-mode is part of display-timingsMartin Kaiser1-1/+1
Move the native-mode property inside the display-timings node. According to Documentation/devicetree/bindings/display/panel/display-timing.txt. native-mode is a property of the display-timings node. If it's located outside of display-timings, the native-mode setting is ignored and the first display timing is used (which is a problem only if someone adds another display timing). Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12ARM: dts: eukrea-mbimxsd27: native-mode is part of display-timingsMartin Kaiser1-1/+1
Move the native-mode property inside the display-timings node. According to Documentation/devicetree/bindings/display/panel/display-timing.txt. native-mode is a property of the display-timings node. If it's located outside of display-timings, the native-mode setting is ignored and the first display timing is used (which is a problem only if someone adds another display timing). Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12ARM: dts: imx25: mbimxsd25: native-mode is part of display-timingsMartin Kaiser1-1/+1
Move the native-mode property inside the display-timings node. According to Documentation/devicetree/bindings/display/panel/display-timing.txt. native-mode is a property of the display-timings node. If it's located outside of display-timings, the native-mode setting is ignored and the first display timing is used (which is a problem only if someone adds another display timing). Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12ARM: dts: imx27 phyCARD-S: native-mode is part of display-timingsMartin Kaiser1-1/+1
Move the native-mode property inside the display-timings node. According to Documentation/devicetree/bindings/display/panel/display-timing.txt. native-mode is a property of the display-timings node. If it's located outside of display-timings, the native-mode setting is ignored and the first display timing is used (which is a problem only if someone adds another display timing). Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03ARM: dts: imx53: Update LCD panel node on M53MenloMarek Vasut1-1/+2
Update the panel node with latest version of the panel used on the system. Add missing pincontrol phandle to the panel node. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03ARM: dts: imx25-pdk: native-mode is part of display-timingsMartin Kaiser1-1/+1
Move the native-mode property inside the display-timings node. According to Documentation/devicetree/bindings/display/panel/display-timing.txt. native-mode is a property of the display-timings node. If it's located outside of display-timings, the native-mode setting is ignored and the first display timing is used (which is a problem only if someone adds another display timing). Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03ARM: dts: imx: Cleanup style around assignment operatorKrzysztof Kozlowski7-20/+20
Use a space before and after assignment operator to have consistent style. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03ARM: dts: imx6qdl-nit6xlite: Remove invalid propertiesFabio Estevam1-2/+0
The "vqmmc-1-8-v" and "ocr-limit" properties are not documented anywhere, so just remove them. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03ARM: dts: imx6qdl-wandboard: Add OV5645 camera supportEzequiel Garcia1-4/+69
imx6qdl-wandboard can be connected to a OV5645 camera via MIPI CSI port. Add support for it. PAD_GPIO_6 has been originally used for the Ethernet FEC ERR006687 workaround, but it needs to be used to provide the camera sensor clock, so adjust it accordingly. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6sll: move GIC to right location in DTAnson Huang1-9/+9
GIC is inside of SoC from architecture perspective, it should be located inside of soc node in DT. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6ul: move GIC to right location in DTAnson Huang1-12/+12
GIC is inside of SoC from architecture perspective, it should be located inside of soc node in DT. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6sl: move GIC to right location in DTAnson Huang1-9/+9
GIC is inside of SoC from architecture perspective, it should be located inside of soc node in DT. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6sx: move GIC to right location in DTAnson Huang1-9/+9
GIC is inside of SoC from architecture perspective, it should be located inside of soc node in DT. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: vf610-zii-scu4-aib: Drop unused pinctrl_i2c3 pinmux configAndrey Smirnov1-7/+0
Pinctrl_i2c3 pinmux config is not used anywhere. Drop it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: vf610-zii-scu4-aib: Fix pinctrl_i2c1's identationAndrey Smirnov1-1/+2
Fix pinctrl_i2c1's inconsistent identation. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: vf610-zii-spb4: Drop unused pinctrl_i2c1 pinmux configAndrey Smirnov1-7/+0
Pinctrl_i2c1 pinmux config is not used anywhere. Drop it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX 6ULLStefan Riedmueller7-0/+315
In addition to the PHYTEC phyCORE-i.MX 6UL the PHYTEC phyBOARD-Segin is also available with the PHYTEC phyCORE-i.MX 6ULL. So this adds support for this SOM and its baseboards. It comes in a full featured option with either NAND flash or eMMC and in a low cost option only available with NAND flash. The hardware specs are: - Full featured with NAND or eMMC: * i.MX 6ULL Y2 * 512MB DDR3 memory * 512MB NAND flash or 4GB/8GB eMMC * Dual 10/100 Ethernet * USB Host and USB OTG * RS232 * MicroSD external storage * Audio, RS232, I2C, SPI, CAN headers * Further I/O options via A/V and Expansion headers - Low cost with NAND: * i.MX 6ULL Y0 * 256MB DDR3 memory * 128MB NAND flash * Single 10/100 Ethernet * USB OTG * RS232 * MicroSD external storage * I2C * Further I/O options via Expansion headers Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6ul: segin: Move machine include to dts filesStefan Riedmueller2-1/+1
Move the imx6ul.dtsi include to the dts files so it is easier to reuse the SOM dtsi for e.g. an i.MX 6ULL SOM. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6ul: segin: Move ECSPI interface to board include fileStefan Riedmueller2-14/+16
The ECSPI interface is available on the expansion connector of every PHYTEC phyBOARD-Segin. Move its definition to the board include file for better reuse. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6ul: phycore: Add eMMC at usdhc2Stefan Riedmueller1-0/+24
The phyCORE-i.MX 6UL/ULL now can have eMMC instead of the NAND flash memory. Add the eMMC node and disable it by default so it can be enabled in case it is populated. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6ul: segin: Only enable NAND if it is populatedStefan Riedmueller2-1/+5
The phyCORE-i.MX 6UL/ULL now comes either with NAND flash or eMMC. We have to configure the populated memory type in the device tree files. So the GPMI node gets disabled by default and only enabled if populated. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dtsStefan Riedmueller3-5/+19
To disable Ethernet interfaces in case they are not populated make the FEC and Ethernet PHY status configurable in the dts files. Also change the Ethernet PHYs labels to make them correspond to the MDIO address. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01Stefan Riedmueller2-9/+10
Fix node name for the user LEDs to prevent the pinctrl of the phyCORE's leds node from being overwritten. Also use more generic names for user LEDs. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6ul: segin: Reduce eth drive strengthStefan Riedmueller2-10/+10
Reduce the drive strength for the MDC, MDIO and TX pins of FEC1 and FEC2 on the phyBOARD-Segin to improve signal quality and EMC. Also disable internal pull-ups on the MDC and MDIO pins. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6ul: segin: Add boot media to dts filenameStefan Riedmueller2-3/+4
There is now a PHYTEC phyCORE-i.MX 6UL with eMMC instead of NAND flash available. The dts filename needs to reflect that to differentiate both. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name schemeStefan Riedmueller5-7/+7
Use the same name scheme for the phyBOARD-Segin and the phyCORE-i.MX 6UL as is used for the PHYTEC phyBOARD-Mira and phyCORE-i.MX 6. This is only a cosmetic change and there is no functional change intended. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-22ARM: dts: opos6uldev: use OF graph to describe the displaySébastien Szymanski1-21/+16
To make use of the new eLCDIF DRM driver OF graph description is required. Describe the display using OF graph nodes. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-22ARM: dts: imx7ulp: add edma device nodeRobin Gong1-0/+28
Add edma device node in dts. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-22ARM: dts: imx7-colibri: Remove unneeded snvs_pwrkey nodeFabio Estevam1-4/+0
Since commit 4664179fe679 ("ARM: dts: imx7s: Enable SNVS power key according to board design") snvs_pwrkey is disabled by default, so there is no need for disabling it explicitly in the board dts anymore. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-22ARM: dts: imx7d-zii-rpu2: Remove unneeded snvs_pwrkey nodeFabio Estevam1-4/+0
Since commit 4664179fe679 ("ARM: dts: imx7s: Enable SNVS power key according to board design") snvs_pwrkey is disabled by default, so there is no need for disabling it explicitly in the board dts anymore. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-22ARM: dts: Add ZII support for ZII i.MX7 RMU2 boardAndrey Smirnov2-0/+358
Add support for ZII's i.MX7 based Remote Modem Unit 2 (RMU2) board. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Bob Langer <Bob.Langer@zii.aero> Cc: Liang Pan <Liang.Pan@zii.aero> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-22ARM: dts: imx6sll: correct sdma compatibleRobin Gong1-1/+1
Correct sdma compatible since ecspi errata ERR009165 has been fixed on i.mx6sll as i.mx6ul. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-22ARM: dts: imx6ul: add dma support on ecspiRobin Gong1-0/+8
Add dma support on ecspi. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-22Linus 5.3-rc1Linus Torvalds1-2/+2
2019-07-21Merge tag 'devicetree-fixes-for-5.3' of ↵Linus Torvalds11-122/+119
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object'
2019-07-21Merge branch 'work.misc' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-28 03:43:46 +0300