summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-02-04Blackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warningBryan Wu1-0/+1
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2Graf Yang1-42/+42
bss_l2 section is garbage when the data in this section is used by _bfin_relocate_l1_mem, so move the zero out function ahead. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: base SIC_IWR# programming on whether the MMR existsMike Frysinger2-14/+8
base SIC_IWR# programming on whether the MMR exists rather than having to maintain another list of processors Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in itMike Frysinger1-0/+6
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: fixup board init function nameMike Frysinger6-12/+12
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefsMike Frysinger8-42/+0
Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this already by stubbing things out Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: bfin_reset->_bfin_reset redirection no longer neededMike Frysinger1-7/+1
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: sync reboot handler with version in u-bootMike Frysinger1-11/+15
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Faster Implementation of csum_tcpudp_nofold()Michael Hennerich1-17/+17
Avoid conditional branch instructions during carry bit additions. Special thanks to Bernd. Simplify: Use ((len + proto) << 8) like every other __LITTLE_ENDIAN__ machine Cc: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix bug - BF518 port F, G, and H have different mux offset ↵Graf Yang1-5/+12
compare to BF527 [Mike Frysinger <vapier.adi@gmail.com>: keep the ifdef nest down] Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Add in cflag to support mlong-calls for kgdb_testGrace Pan1-0/+2
Signed-off-by: Grace Pan <grace.pan@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrdSonic Zhang16-15/+19
[Mike Frysinger <vapier.adi@gmail.com>: - setup P_DEFAULT_BOOT_SPI_CS for every arch based on the default bootrom behavior and convert all our boards to it - revert previous anomaly change ... bf51x is not affected by anomaly 05000353] Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04MAINTIANERS: Blackfin: remove subscribers-only markingMike Frysinger1-1/+1
remove subscribers-only marking as the list is automatically & silently moderated for people Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Add ability to count and display number of NMI interruptsRobin Getz2-1/+8
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Add a few more instructions that can cause the trace buffer ↵Robin Getz1-0/+12
to be discontiguous Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix URLRobin Getz1-1/+1
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: cleanup bf54x ifdef mess in gpio codeMike Frysinger3-409/+208
merge more of the bf54x and !bf54x gpio code together to cut down on #ifdef mess Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Add one more check on `fp' to prevent double faultJie Zhang1-5/+3
Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: explicit add a might sleep to gpio_freeUwe Kleine-Koenig1-0/+2
According to the documentation gpio_free should only be called from task context only. To make this more explicit add a might sleep to all implementations. This patch changes the gpio_free implementations for the blackfin architecture. Signed-off-by: Uwe Kleine-Koenig <ukleinek@strlen.de> Cc: David Brownell <david-b@pacbell.net> Acked-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-02-04Blackfin arch: don't accidently re-enable interruptsRobin Getz1-6/+13
Make sure we don't accidently re-enable interrupts if we are being called in atomic context Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Print out where the bootmode is coming from (for easier ↵Robin Getz1-0/+2
debugging). Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: reset POLAR setting when acquiring a gpio for the first timeMichael Hennerich1-1/+7
when requesting a GPIO for the first time, the POLAR setting is not set to a sane state. this can lead to indeterminate behavior that cannot be resolved without an explicit write to the Blackfin port POLAR register. when requesting a GPIO for the first time via gpio_request(), the POLAR setting for the GPIO in question should be set to sane state. this should occur if the GPIO has not been allocated in any other way. some examples: - when doing something like "request_irq(); gpio_request();" on the same GPIO, the POLAR setting should not be reset. - when doing "gpio_request(); gpio_request();" on the same GPIO, the POLAR setting should be reset only the first time and not the second. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix Bug - request lines with peripheral_request_list, but ↵Michael Hennerich1-3/+0
don't get freed with peripheral_free_list Remove erroneous check_gpio(ident) in peripheral_free() Reported-by: Michael McTernan <mmcternan@airvana.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix Bug - Kernel does not boot if re-program clocksMichael Hennerich2-2/+3
On BF561 EBIU_SDGCTL bit 31 controls the SDRAM external data path width, typically set 0 for a 32-bit bus width. On other Blackfin derivatives this bit should be set by default. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: fix bug - Dmacopy failed in BF537-STAMPMike Frysinger1-0/+7
Dmacopy failed in BF537-STAMP when copy from SRAM to SDRAM and kernel will reboot automatically. Fixing by doing a SSYNC before mucking with DMA registers Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: enable bfin_eth in bf51x by defaultSonic Zhang1-1/+6
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: line up machine-/cpu- vars after BF54xM additionMike Frysinger1-48/+48
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: add support for mobile ddr bf54x partsMike Frysinger3-11/+63
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: scrub comments/whitespace/cvs keywordsMike Frysinger1-38/+15
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04write-back: fix nr_to_write counterArtem Bityutskiy1-6/+15
Commit 05fe478dd04e02fa230c305ab9b5616669821dd3 introduced some @wbc->nr_to_write breakage. It made the following changes: 1. Decrement wbc->nr_to_write instead of nr_to_write 2. Decrement wbc->nr_to_write _only_ if wbc->sync_mode == WB_SYNC_NONE 3. If synced nr_to_write pages, stop only if if wbc->sync_mode == WB_SYNC_NONE, otherwise keep going. However, according to the commit message, the intention was to only make change 3. Change 1 is a bug. Change 2 does not seem to be necessary, and it breaks UBIFS expectations, so if needed, it should be done separately later. And change 2 does not seem to be documented in the commit message. This patch does the following: 1. Undo changes 1 and 2 2. Add a comment explaining change 3 (it very useful to have comments in _code_, not only in the commit). Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: Nick Piggin <npiggin@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-04Fix my email address in qd65xx.[ch]/pata_qdi.cSamuel Thibault3-3/+3
The @fnac.net will be shut down within a couple of months, so fix my email address. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-04Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds16-293/+393
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: remove fast unmounting UBIFS: return sensible error codes UBIFS: remount ro fixes UBIFS: spelling fix 'date' -> 'data' UBIFS: sync wbufs after syncing inodes and pages UBIFS: fix LPT out-of-space bug (again) UBIFS: fix no_chk_data_crc UBIFS: fix assertions UBIFS: ensure orphan area head is initialized UBIFS: always clean up GC LEB space UBIFS: add re-mount debugging checks UBIFS: fix LEB list freeing UBIFS: simplify locking UBIFS: document dark_wm and dead_wm better UBIFS: do not treat all data as short term UBIFS: constify operations UBIFS: do not commit twice
2009-02-04Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds23-249/+122
* master.kernel.org:/home/rmk/linux-2.6-arm: NVRAM depends on RTC_DRV_CMOS rename platform_driver name "flash" to "sa1100-mtd" annotate that [fp, #-4] is the saved lr Use __SPIN_LOCK_UNLOCKED to initialize bad_irq_desc.lock ARM: OMAP: fix fault in enter_full_retention() ARM: OMAP: Mask interrupts when disabling interrupts, v2 ARM: OMAP: gptimer min_delta_ns corrected ARM: OMAP: Fix hsmmc init, v2 ARM: OMAP: Fix omap34xx revision detection for ES3.1 ARM: OMAP: DMA: Fix uninitialized channel flags ARM: OMAP: Fix race in OMAP2/3 DMA IRQ handling ARM: OMAP: Fix McBSP spin_lock deadlock [ARM] 5366/1: fix shared memory coherency with VIVT L1 + L2 caches [ARM] call undefined instruction exception handler with irqs enabled [ARM] msm: fix build errors [ARM] etherh: continue fixing build failure
2009-02-04Merge branch 'upstream-linus' of ↵Linus Torvalds9-14/+133
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: add quota call to ocfs2_remove_btree_range() ocfs2: Wakeup the downconvert thread after a successful cancel convert ocfs2: Access the xattr bucket only before modifying it. configfs: Silence lockdep on mkdir(), rmdir() and configfs_depend_item() ocfs2: Fix possible deadlock in ocfs2_write_dquot() ocfs2: Push out dropping of dentry lock to ocfs2_wq
2009-02-04Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds3-16/+31
* 'for-linus' of git://oss.sgi.com/xfs/xfs: [XFS] Warn on transaction in flight on read-only remount xfs: Check buffer lengths in log recovery don't reallocate sxp variable passed into xfs_swapext
2009-02-03[XFS] Warn on transaction in flight on read-only remountFelix Blyakher1-1/+5
Till VFS can correctly support read-only remount without racing, use WARN_ON instead of BUG_ON on detecting transaction in flight after quiescing filesystem. Signed-off-by: Felix Blyakher <felixb@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2009-02-03xfs: Check buffer lengths in log recoveryDave Chinner1-6/+25
Before trying to obtain, read or write a buffer, check that the buffer length is actually valid. If it is not valid, then something read in the recovery process has been corrupted and we should abort recovery. Reported-by: Eric Sesterhenn <snakebyte@gmx.de> Tested-by: Eric Sesterhenn <snakebyte@gmx.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-02-03Merge branch 'master' of ↵Felix Blyakher1444-11635/+26705
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus
2009-02-03Merge branch 'upstream-linus' of ↵Linus Torvalds11-53/+193
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: implement HORKAGE_1_5_GBPS and apply it to WD My Book libata: add no penalty retry request for EH device handling routines libata: improve probe failure handling libata: add @spd_limit to sata_down_spd_limit() libata: clear dev->ering in smarter way libata: check onlineness before using SPD in sata_down_spd_limit() libata: move ata_dev_disable() to libata-eh.c libata: fix EH device failure handling sata_nv: ck804 has borked hardreset too ide/libata: fix ata_id_is_cfa() (take 4) libata: fix kernel-doc warnings ahci: add a module parameter to ignore the SSS flags for async scanning sata_mv: Fix chip type for Hightpoint RocketRaid 1740/1742 [libata] sata_sil: Fix compilation error with libata debugging enabled
2009-02-03libata: implement HORKAGE_1_5_GBPS and apply it to WD My BookTejun Heo2-0/+42
3Gbps is often much more prone to transmission failures. It's usually okay to let EH handle speed down after transmission failures but some WD My Book drives completely shutdown after certain transmission failures and after it only power cycling can revive them. Combined with the fact that external drives often end up with cable assembly which is longer than usual and more likely to have intervening gender, this makes these drives very likely to shutdown under certain configurations virtually rendering them unusable. This patch implements HOARKGE_1_5_GBPS and applies it to WD My Book such that 1.5Gbps is forced once the device is identified. Please take a look at the following bz for related reports. http://bugzilla.kernel.org/show_bug.cgi?id=9913 Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-03libata: add no penalty retry request for EH device handling routinesTejun Heo1-1/+5
Let -EAGAIN from EH device handling routines trigger EH retry without consuming its tries count. This will be used to implement link SPD horkage which requires hardreset to adjust SPD without affecting other EH decisions. As it bypasses the forward progress guarantee provided by the tries count, the requester is responsible for ensuring forward progress. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-03libata: improve probe failure handlingTejun Heo1-0/+38
When link is flaky at high speed, it isn't uncommon for a device to repeatedly fail probing sequence early after successfully negotiating high link speed. This often leads to consecutive hotplug events without successful probing. This patch improves libata EH such that it remembers probing trials and if there have been more than two unsuccessful trials in the past 60 seconds, slows down link speed to 1.5Gbps. As link speed negotiation is the duty of the PHY layer proper, the goal of this fallback mechanism is to provide the last resort when everything else fails, which unfortunately happens not too infrequently, so no fancy 6->3->1.5 speeding down or highest successful transmission speed seen kind of logics (yet). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-03libata: add @spd_limit to sata_down_spd_limit()Tejun Heo4-12/+27
Add @spd_limit to sata_down_spd_limit() so that the caller can specify the SPD limit it wants. This parameter doesn't get in the way even when it's too low. The closest possible limit is applied. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-03libata: clear dev->ering in smarter wayTejun Heo3-10/+19
dev->ering used to be cleared together with the rest of ata_device in ata_dev_init() which is called whenever a probing event occurs. dev->ering is about to be used to track probing failures so it needs to remain persistent over multiple porbing events. This patch achieves this by doing the following. * Instead of CLEAR_OFFSET, define CLEAR_BEGIN and CLEAR_END and only clear between BEGIN and END. ering is moved after END. The split of persistent area is to allow hotter items remain at the head. * ering is explicitly cleared on ata_dev_disable() and when device attach succeeds. So, ering is persistent throug a device's life time (unless explicitly cleared of course) and also through periods inbetween disablement of an attached device and successful detection of the next one. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-03libata: check onlineness before using SPD in sata_down_spd_limit()Tejun Heo1-3/+8
sata_down_spd_limit() should check whether the link is online before using the SPD value to determine how to limit the link speed. Factor out onlineness test and test it from sata_down_spd_limit(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-03libata: move ata_dev_disable() to libata-eh.cTejun Heo3-13/+22
ata_dev_disable() is about to be more tightly integrated into EH logic. Move it to libata-eh.c. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-03libata: fix EH device failure handlingTejun Heo1-2/+3
The dev->pio_mode > XFER_PIO_0 test is there to avoid unnecessary speed down warning messages but it accidentally disabled SATA link spd down during configuration phase after reset where PIO mode is always zero. This patch fixes the problem by moving the test where it belongs. This makes libata probing sequence behave better when the connection is flaky at higher link speeds which isn't too uncommon for eSATA devices. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-03sata_nv: ck804 has borked hardreset tooTejun Heo1-1/+6
While playing with nvraid, I found out that rmmoding and insmoding often trigger hardreset failure on the first port (the second one was always okay). Seriously, how diverse can you get with hardreset behaviors? Anyways, make ck804 use noclassify variant too. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-03ide/libata: fix ata_id_is_cfa() (take 4)Sergei Shtylyov1-5/+10
When checking for the CFA feature set support, ata_id_is_cfa() tests bit 2 in word 82 of the identify data instead the word 83; it also checks the ATA/PI version support in the word 80 (which the CompactFlash specifications have as reserved), this having no slightest chance to work on the modern CF cards that don't have 0x848A in the word 0... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-03libata: fix kernel-doc warningsRandy Dunlap2-2/+2
Fix libata kernel-doc warnings: Warning(linux-next-20090120//drivers/ata/libata-core.c:4720): Excess function parameter 'dev' description in 'ata_qc_new' Warning(linux-next-20090120//drivers/ata/libata-scsi.c:428): No description found for parameter 'ap' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-11 12:59:16 +0300