summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-08ARM: dts: vf: Add memory node unit nameFabio Estevam6-6/+6
Include memory node unit name in order to fix the following W=1 warnings: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-08ARM: dts: vf500: Remove skeleton.dtsi inclusionFabio Estevam1-1/+6
Since commit 9c0da3cc61f1 ("ARM: dts: explicitly mark skeleton.dtsi as deprecated") the inclusion of skeleton.dtsi is deprecated, so remove it as this file will eventually go away someday. Move its content to the SoC dtsi file, so that the resultant dtb is the same. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-08ARM: dts: imx7s: add temperature monitor supportAnson Huang1-0/+20
Add i.MX7 temperature monitor support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-08ARM: dts: imx: Add missing #sound-dai-cells for sgtl5000 codecRob Herring14-0/+14
dtc now warns about missing #sound-dai-cells: arch/arm/boot/dts/imx6ul-geam.dtb: Warning (sound_dai_property): /sound/simple-audio-card,codec: Missing property '#sound-dai-cells' in node /soc/aips-bus@2100000/i2c@21a0000/codec@a or bad phandle (referred from sound-dai[0]) arch/arm/boot/dts/imx6ul-isiot-emmc.dtb: Warning (sound_dai_property): /sound/simple-audio-card,codec: Missing property '#sound-dai-cells' in node /soc/aips-bus@2100000/i2c@21a0000/codec@a or bad phandle (referred from sound-dai[0]) arch/arm/boot/dts/imx6ul-isiot-nand.dtb: Warning (sound_dai_property): /sound/simple-audio-card,codec: Missing property '#sound-dai-cells' in node /soc/aips-bus@2100000/i2c@21a0000/codec@a or bad phandle (referred from sound-dai[0]) Lots of i.MX boards use the SGTL5000 codec, but not all get the warning because only some reference the codec with "sound-dai" property. However, the codec should always provide #sound-dai-cells regardless, so fix all the occurrences. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-08ARM: dts: imx51-zii-rdu1: Add node for RAVE SP deviceAndrey Smirnov1-0/+9
With MFD and watchdog drivers for RAVE SP device support added by 538ee27290fa ("mfd: Add driver for RAVE Supervisory Processor") and c3bb33345721 ("watchdog: Add RAVE SP watchdog driver") add corresponding DT node for RDU. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Chris Healy <cphealy@gmail.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-08ARM: dts: imx6: RDU2: Add RAVE SP deviceAndrey Smirnov1-0/+9
With MFD and watchdog drivers for RAVE SP device support added by 538ee27290fa ("mfd: Add driver for RAVE Supervisory Processor") and c3bb33345721 ("watchdog: Add RAVE SP watchdog driver") add corresponding DT node for RDU2. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Chris Healy <cphealy@gmail.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-01ARM: dts: imx5: Pass the memory unit-addressFabio Estevam2-4/+4
Pass the memory unit-address to fix the following build warnings with W=1: arch/arm/boot/dts/imx51-zii-rdu1.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name arch/arm/boot/dts/imx53-tx53-x03x.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name arch/arm/boot/dts/imx53-tx53-x13x.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name In theses cases an empty memory node is passed, which will be filled by the bootloader. Passing the memory base address still allows the bootloader to fill the memory size. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-28ARM: dts: imx7s: add spba-bus abstractionStefan Agner1-103/+111
According to the i.MX 7Solo/Dual Application Processor Reference Manual the ECSPI1/2/3, UART1/2/3 and SAI1/2/3 peripherals are connected through the SPBA bus. Other similar SoCs such as i.MX 6UL add this bus abstraction. This adds the bus also to the i.MX 7 device tree. The i.MX SDMA driver uses this abstraction to configure watermark levels slightly differently, so this might change behavior slightly. There have no issues been observed before or after the patch. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-28ARM: dts: imx6dl-icore-rqs: Fix invalid PHY address assignment for ethernetShyam Saini1-1/+5
Add "reg" property for ethernet to fix this issue. Errors in boot logs: mdio_bus 2188000.ethernet-1: /soc/aips-bus@02100000/ethernet@02188000/mdio/ethernet-phy has invalid PHY address mdio_bus 2188000.ethernet-1: scan phy ethernet-phy at address 0 mdio_bus 2188000.ethernet-1: scan phy ethernet-phy at address 1 mdio_bus 2188000.ethernet-1: scan phy ethernet-phy at address 2 mdio_bus 2188000.ethernet-1: scan phy ethernet-phy at address 3 Reported-by: Shyam Saini <shyam@amarulasolutions.com> Suggested-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Shyam Saini <shyam@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-28ARM: dts: imx6ul: add wdog3 nodeJörg Krause1-0/+8
The i.MX6UL(L) has a WDOG3 located at start address 0x021E0000 in the AIPS-2 memory region [1]. [1] i.MX 6UltraLite Applications Processor Reference Manual, Rev. 1, 04/2016, Table-2-3 AIPS-2 memory map, p. 166 Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-28ARM: dts: imx7: add CPU PMU supportStefan Agner1-0/+6
Enable support for ARM Performance Monitoring Units available on the Cortex-A7 CPU. There is only a single interrupt for the PMU in both variants of the family, i.MX 7Solo and 7Dual. Tested with perf on a i.MX 7Dual: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-28ARM: dts: imx6dl-colibri-eval-v3: Add chosen nodeStefan Agner1-0/+4
Add Colibri UART_A as default serial console. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-28ARM: dts: imx6: Pass memory unit-adressFabio Estevam19-36/+36
Pass the memory unit-adress to fix the following build warnings with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name There are cases where dts passes an empty memory node, which will be filled by the bootloader. Passing the memory base address still allows the bootloader to fill the memory size. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-By: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-24ARM: dts: imx6dl: remove 'lcdif' nodeLothar Waßmann1-5/+0
According to the "i.MX 6Solo/6DualLite Applications Processor Reference Manual" Rev. 3, 09/2017 there is no LCDIF unit on the i.MX6DL. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-24ARM: dts: hummingboard: Remove mention of nonexistent nodeBaruch Siach2-4/+2
There is no pinctrl_usbotg_2 node in current Hummingboard dts files. Drop reference to that. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-24ARM: dts: imx6qdl-hummingboard: fix USBOTG-ID pinJon Nettleton1-1/+1
Fix the USBOTG-ID pin to the correct definition. The top USB port stays in device-mode without this change. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-24ARM: dts: imx28-tx28: Pass the memory unit nameFabio Estevam1-2/+2
Pass the memory unit name in order to fix the following dtc warning with W=1: arch/arm/boot/dts/imx28-tx28.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-24ARM: dts: imx6: remove GPU subsystem nodesLucas Stach3-15/+0
They aren't needed by the etnaviv driver anymore and have been removed from the binding. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-24ARM: dts: imx6: RDU2: detail USDHC descriptionLucas Stach1-0/+7
None of the slots support 1.8V signaling or SDIO. There is no point in probing for a SD card on the eMMC controller. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-24ARM: dts: imx: Add support for Advantech DMS-BA16Ken Lin2-0/+140
Add support for Advantech DMS-BA16 board, which uses the Advantech BA-16 module. Signed-off-by: Ken Lin <yungching0725@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6ull: add Toradex Colibri iMX6ULL supportStefan Agner7-1/+829
Add support for the Computer on Module Colibri iMX6ULL and its Bluetooth/Wifi variant along with the development/evaluation carrier board device trees. Follow the usual hierarchic include model, maintaining shared configuration in imx6ull-colibri.dtsi and imx6ull-colibri-eval-v3.dtsi respectively. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6ul: rename mux mode name REF_CLK_32K to OSC32K_32K_OUTJörg Krause1-3/+3
This is a rebased version of patch [0]. The 32 kHz reference clock on the i.MX6UL(L) can be output by setting the external signal XTALOSC_REF_CLK_32K in one of the following ways [1]: |----------------------------------------------------------| | Signal | Pad | Mode | Direction | |----------------------------------------------------------| | XTALOSC_REF_CLK_32K | ENET1_RX_EN | ALT2 | O | | | GPIO1_IO03 | ALT3 | | | | JTAG_TCK | ALT6 | | |----------------------------------------------------------| Before patch [2] the mux mode for the external reference clock was missing. The patch named the mux mode as used in the NXP Linux 4.9.11_1.0.0 release, but the Reference Manual uses the name OSC32K_32K_OUT, e.g. in [3]. As Philipp and Shawn suggest the name from the RM should be used instead. [0] https://patchwork.kernel.org/patch/10172187/ [1] IMX6ULRM, Rev. 1, 04/2016, Table 58-1, p. 3649 [2] https://patchwork.kernel.org/patch/10156121/ [3] IMX6ULRM, Rev. 1, 04/2016, 30.5.47 SW_MUX_CTL_PAD_ENET1_RX_EN SW MUX Control Register (IOMUXC_SW_MUX_CTL_PAD_ENET1_RX_EN), p. 1357 Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6ull: fix the imx6ull-14x14-evk configurationLothar Waßmann3-491/+504
imx6ull-14x14-evk.dts currently includes the imx6ul.dtsi file for an i.MX6ULL SoC which is plain wrong. Rename the current imx6ul-14x14-evk.dts to .dtsi and include it from imx6ul-14x14-evk.dts and imx6ull-14x14-evk.dts, so that both can include the appropriate SoC specific (imx6ul.dtsi/imx6ull.dtsi) file. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6q-bx50v3: Enable secure-reg-accessPeter Senna Tschudin2-1/+5
Enable secure debug enable register access for Bx50v3 devices to enable PMU and hardware counters for perf. Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx27-eukrea-cpuimx27: Put the clock node directly into rootFabio Estevam1-11/+4
Put the UART clock node directly under root with a unique node name and drop unit-address in order to fix the following build warning with W=1: arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dtb: Warning (simple_bus_reg): Node /clocks/osc26m missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx7d: cl-som-imx7: fix pinctrl_enetAapo Vienamo1-26/+26
The missing last digit of the CONFIG values is added. Looks like a typo of some sort when comparing to the downstream dt. This fixes intermittent behavior behaviour of the ethernet controllers. Signed-off-by: Aapo Vienamo <aapo@tuxera.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx25-pinfunc: Always set SION for eSDHC CMDBenoît Thébaudeau1-7/+11
The eSDHC does not work properly if the SION bit is not set for the bidirectional CMD signal, whatever the eSDHC instance and the selected pad. Therefore, setting SION is mandatory for all eSDHC CMD ports. Do this for MX25_PAD_*__ESDHCn_CMD in imx25-pinfunc.h in order to enforce this behavior for all boards. This had already been done for eSDHC1, but not for eSDHC2. Also, define MX25_PAD_FEC_MDC__ESDHC2_CMD so that all the possible cases are covered from now on. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx25-pinfunc: Use consistent naming for eSDHCBenoît Thébaudeau3-36/+60
This file had several naming inconsistencies for eSDHC: - the instances were named sometimes SDn, sometimes SDHCn, whereas they are named ESDHCn in the reference manual, e.g.: MX25_PAD_SD1_CMD__SD1_CMD MX25_PAD_D15__SDHC1_DAT7 - the data ports were named sometimes DATAn, sometimes DATn like in the reference manual, e.g.: MX25_PAD_SD1_DATA0__SD1_DATA0 MX25_PAD_D15__SDHC1_DAT7 - in one case, the clock port was named DAT_CLK instead of CLK: MX25_PAD_CSI_D7__SDHC2_DAT_CLK This change: - introduces new definitions using the naming from the reference manual, - keeps definitions using the legacy naming in order not to break compatibility for out-of-tree users (they can be removed later), - updates the in-tree files that were using the legacy naming. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: fix the at24 compatible string in imx6q-h100Bartosz Golaszewski1-1/+1
Using 'at24' as fallback is now deprecated - use the full 'atmel,<model>' string. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: use 'atmel' as at24 manufacturer for imx6qdl-rexBartosz Golaszewski1-1/+1
Using 'at' as the <manufacturer> part of the compatible string is now deprecated. Use a correct string: 'atmel,<model>'. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: use 'atmel' as at24 manufacturer for imx6qdl-zii-rdu2Bartosz Golaszewski1-1/+1
Using 'at' as the <manufacturer> part of the compatible string is now deprecated. Use a correct string: 'atmel,<model>'. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx: Add memory node unit nameMarco Franchi121-121/+121
Fix the following warnings from dtc by adding the unit name to memory nodes: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Converted using the following command: perl -p0777i -e 's/memory \{\n\t\treg = \<0x+([0-9a-f])/memory\@$1$\0000000 \{\n\t\treg = <0x$1/m' `find ./arch/arm/boot/dts -name "imx*"` The files below were manually fixed: -imx1-ads.dts -imx1-apf9328.dts -imx6q-pistachio.dts Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx: Remove empty memory size nodesMarco Franchi15-15/+15
Remove the empty reg property from the SoC dtsi files in order to avoid duplicate memory nodes when the correct size is passed in board dts files. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx: Pass empty memory size on board dtsMarco Franchi17-0/+85
In preparation for removing 'reg = <0 0>;' from the dtsi SoC files, pass 'reg = <0 0 >;' to the dts/dtsi board files that do not pass the memory size. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6sx: add ARM power domain supportAnson Huang1-0/+5
Add ARM power domain in PGC. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6sx: add pu power domain supportAnson Huang1-0/+8
Add PU power domain support, GPU is the only module inside PU power domain, and PU power is supplied by LDO_SOC. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx7s-warp: enable uart6 on mikroBusRyan Harkin1-0/+16
This patch configures the board to output UART6 to the mikroBus. The NXP WaRP7 board can route UART6 to the mikroBus, where an RS232 click board can be plugged in to get an additional serial port. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6q-bx50v3: disable SD cardIan Ray1-0/+4
Default boot medium must be internal eMMC, we don't want the SDIO to be used for these devices. This commit disables the SD card interface for GE Healthcare Bx50v3 devices. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx53-ppd: use PMIC's TSI pins in adc modeSebastian Reichel1-0/+10
PPD uses the PMIC's TSI pins in general purpose ADC mode. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx53-ppd: Add touchscreen reset lineMartyn Welch1-0/+1
Utilise new support in Atmel MaxTouch driver to drive the touchscreen controllers reset line correctly. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6ull: add UART8 supportStefan Agner1-0/+14
In i.MX 6ULL UART8 is part of the AIPS-3 memory map instead of AIPS-1. Clocks and interrupts remain the same. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6ull: add IOMUXC SNVS instanceStefan Agner1-0/+17
The i.MX 6ULL features another IOMUX Controller called IOMUXC SNVS which allows to control BOOT_MODE and TAMPER pins. Add the controller to the i.MX 6ULL specific imx6ull.dtsi device tree. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6ul: add ARM architected timerStefan Agner1-0/+10
Add per-core ARM architected timer. Unfortunately bootloaders (U-Boot) currently do not make the necessary initialization. Also specifing the clock manually using the clock-frequency property seems not to help. Therefor leave the timer disabled by default for now. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6ul: add interrupt of virt-capable GICStefan Agner1-0/+2
The Cortex-A7 and its GIC support virtualization extensions. To make use of them the CPU private interrupt needs to be specified. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6ull: add additional pinfunc defines for i.MX 6ULLBai Ping2-0/+27
On i.MX 6ULL, the pin MUX and CTRL register of BOOT_MODEx and TAMPERx pins are available through IOMUXC_SNVS. Add additional pinfunc defines. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6ul: update i.MX 6UltraLite iomux headersFugang Duan1-72/+97
Add previously missing daisy chain configurations and several additional pinmux options. Synchronized with NXP Linux 4.9.11_1.0.0 release. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6: Add support for phyBOARD-Mira with i.MX 6QuadPlusEnrico Scholz2-0/+73
Add support for the PHYTEC phyBOARD-Mira with i.MX 6QuadPlus with NAND. It is based on the phyBOARD-Mira with i.MX 6Quad/Dual and supports the same interfaces. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6 DualLight/Solo RDKChristian Hemp2-0/+65
Add support for the PHYTEC phyBOARD-Mira Low-Cost Rapid Development Kit with i.MX 6DualLight/Solo with NAND. Following interfaces are supported: - 100 MBit Ethernet - USB Host - RS232 - HDMI Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6Quad/Dual RDKChristian Hemp3-0/+146
Add support for the PHYTEC phyBOARD-Mira Rapid Development Kit with i.MX 6Quad/Dual with eMMC or NAND. Following interfaces are supported: - Gigabit Ethernet - USB Host - CAN - RS232 - PCIe - LVDS - HDMI Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6: Add initial support for phyBOARD-MiraStefan Riedmueller1-0/+390
This patch adds basic support for PHYTEC phyBOARD-Mira as carrier board for PHYTEC phyCORE-i.MX 6. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 07:16:06 +0300