summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-05net: fman: Mark mac methods staticSean Anderson3-61/+72
These methods are no longer accessed outside of the driver file, so mark them as static. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: fman: Move initialization to mac-specific filesSean Anderson7-323/+277
This moves mac-specific initialization to mac-specific files. This will make it easier to work with individual macs. It will also make it easier to refactor the initialization to simplify the control flow. No functional change intended. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05r8169: remove useless PCI region size checkHeiner Kallweit1-6/+0
Let's trust the hardware here and remove this useless check. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05Merge branch 'lan937x-phy-link-interrupt'David S. Miller6-4/+410
Arun Ramadoss says: ==================== net: dsa: microchip: lan937x: enable interrupt for internal phy link detection This patch series enables the internal phy link detection for lan937x using the interrupt method. lan937x acts as the interrupt controller for the internal ports and phy, the irq_domain is registered for the individual ports and in turn for the individual port interrupts. RFC v3 -> Patch v1 - Removed the RFC v3 1/3 from the series - changing exit from reset - Changed the variable name in ksz_port from irq to pirq - Added the check for return value of irq_find_mapping during phy irq registeration. - Moved the clearing of POR_READY_INT from girq_thread_fn to lan937x_reset_switch RFC v2 -> v3 - Used the interrupt controller implementation of phy link Changes in RFC v2 - fixed the compilation issue ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: dsa: microchip: lan937x: add interrupt support for port phy linkArun Ramadoss6-4/+399
This patch enables the interrupts for internal phy link detection for LAN937x. The interrupt enable bits are active low. There is global interrupt mask for each port. And each port has the individual interrupt mask for TAS. QCI, SGMII, PTP, PHY and ACL. The first level of interrupt domain is registered for global port interrupt and second level of interrupt domain for the individual port interrupts. The phy interrupt is enabled in the lan937x_mdio_register function. Interrupt from which port is raised will be detected based on the interrupt host data. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: dsa: microchip: lan937x: clear the POR_READY_INT status bitArun Ramadoss1-0/+4
In the lan937x_reset_switch(), it masks all the switch and port registers. In the Global_Int_status register, POR ready bit is write 1 to clear bit and all other bits are read only. So, this patch clear the por_ready_int status bit by writing 1. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: dsa: microchip: add reference to ksz_device inside the ksz_portArun Ramadoss2-0/+7
struct ksz_port doesn't have reference to ksz_device as of now. In order to find out from which port interrupt has triggered, we need to pass the struct ksz_port as a host data. When the interrupt is triggered, we can get the port from which interrupt triggered, but to identify it is phy interrupt we have to read status register. The regmap structure for accessing the device register is present in the ksz_device struct. To access the ksz_device from the ksz_port, the reference is added to it with port number as well. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05Merge branch 'ipa-transaction-IDs'David S. Miller3-58/+79
Alex Elder says: ==================== net: ipa: start using transaction IDs A previous group of patches added ID fields to track the state of transactions: https://lore.kernel.org/netdev/20220831224017.377745-1-elder@linaro.org This series starts using those IDs instead of the lists used previously. Most of this series involves reworking the function that determines which transaction is the "last", which determines when a channel has been quiesed. The last patch is mainly used to prove that the new index method of tracking transaction state is equivalent to the previous use of lists. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: ipa: verify a few more IDsAlex Elder1-3/+43
The completed transaction list is used in gsi_channel_trans_complete() to return the next transaction in completed state. Add some temporary checks to verify the transaction indicated by the completed ID matches the one first in this list. Similarly, we use the pending and completed transaction lists when cancelling pending transactions in gsi_channel_trans_cancel_pending(). Add temporary checks there to verify the transactions indicated by IDs match those tracked by these lists. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: ipa: further simplify gsi_channel_trans_last()Alex Elder1-28/+18
Do a little more refactoring in gsi_channel_trans_last() to simplify it further. The resulting code should behave exactly as before. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: ipa: simplify gsi_channel_trans_last()Alex Elder1-26/+7
Using a little logic we can simplify gsi_channel_trans_last(). The first condition in that function looks like this: if (trans_info->allocated_id != trans_info->free_id) And if that's false, we proceed to the next one: if (trans_info->committed_id != trans_info->allocated_id) Failure of the first test implies: trans_info->allocated_id == trans_info->free_id And therefore, the second one can be rewritten this way: if (trans_info->committed_id != trans_info->free_id) Substituting free_id for allocated_id and committed_id can also be done in the code blocks executed when these conditions yield true. The net result is that all three blocks for TX endpoints can be consolidated into just one. The two blocks of code at the end of that function (used for both TX and RX channels) can be similarly consolidated into a single block. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: ipa: use IDs exclusively for last transactionAlex Elder1-15/+27
Always use transaction IDs when finding the "last" transaction to await when quiescing a channel. This basically extends what was done in the previous patch to all other transaction state IDs. As a result we are no longer updating any transaction lists inside gsi_channel_trans_last(), so there's no need to take the spinlock. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: ipa: use IDs for last allocated transactionAlex Elder1-3/+9
Use the allocated and free transaction IDs to determine whether the "last" transaction used for quiescing a channel is in allocated state. The last allocated transaction that has not been committed (if any) immediately precedes the first free transaction in the transaction array. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: ipa: rework last transaction determinationAlex Elder3-36/+28
When quiescing a channel, we find the "last" transaction, which is the latest one to have been allocated. (New transaction allocation will have been prevented by the time this is called.) Currently we do this by looking for the first non-empty transaction list in each state, then return the last entry from that last. Instead, determine the last entry in each list (if any) and return that entry if found. Temporarily (locally) introduce list_last_entry_or_null() as a helper for this, mirroring list_first_entry_or_null(). This macro definition will be removed by an upcoming patch. Remove the temporary warnings added by the previous commit. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05r8169: use devm_clk_get_optional_enabled() to simplify the codeHeiner Kallweit1-34/+3
Now that we have devm_clk_get_optional_enabled(), we don't have to open-code it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05r8169: remove comment about apparently non-existing chip versionsHeiner Kallweit1-6/+0
It's not clear where these entries came from, and as I wrote in the comment: Not even Realtek's r8101 driver knows these chip id's. So remove the comment. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05r8169: merge handling of chip versions 12 and 17 (RTL8168B)Heiner Kallweit3-8/+1
It's not clear why XID's 380 and 381..387 ever got different chip version id's. VER_12 and VER_17 are handled exactly the same. Therefore merge handling under the VER_17 umbrella. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05Merge branch 'altera-tse-phylink'David S. Miller11-447/+536
Maxime Chevallier says: ==================== net: altera: tse: phylink conversion This is V4 of a series converting the Altera TSE driver to phylink, introducing a new PCS driver along the way. The Altera TSE can be built with a SGMII/1000BaseX PCS, allowing to use SFP ports with this MAC, which is the end goal of adding phylink support and a proper PCS driver. The PCS itself can either be mapped in the MAC's register space, in that case, it's accessed through 32 bits registers, with the higher 16 bits always 0. Alternatively, it can sit on its own register space, exposing 16 bits registers, some of which ressemble the standard PHY registers. To tackle that rework, several things needs updating, starting by the DT binding, since we add support for a new register range for the PCS. Hence, the first patch of the series is a conversion to YAML of the existing binding. Then, patch 2 does a bit of simple cleanup to the TSE driver, using nice reverse xmas tree definitions. Patch 3 adds the actual PCS driver, as a standalone driver. Some future series will then reuse that PCS driver from the dwmac-socfpga driver, which implements support for this exact PCS too, allowing to share the code nicely. Patch 4 is then a phylink conversion of the altera_tse driver, to use this new PCS driver. Finally, patch 5 updates the newly converted DT binding to support the pcs register range. This series contains bits and pieces for this conversion, please tell me if you want me to send it as individual patches. V4 Changes: - Add missing MODULE_* macros to the TSE PCS driver V3 Changes: - YAML binding conversion changes and PCS addition changes thanks to Krzysztof's reviews V2 Changes : - Fixed the binding after the YAML conversion - Added a pcs_validate() callback - Introduced a comment to justify a soft reset for the PCS ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05dt-bindings: net: altera: tse: add an optional pcs register rangeMaxime Chevallier1-0/+27
Some implementations of the TSE have their PCS as an external bloc, exposed at its own register range. Document this, and add a new example showing a case using the pcs and the new phylink conversion to connect an sfp port to a TSE mac. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: altera: tse: convert to phylinkMaxime Chevallier4-314/+141
Convert the Altera Triple Speed Ethernet Controller to phylink. This controller supports MII, GMII and RGMII with its MAC, and SGMII + 1000BaseX through a small embedded PCS. The PCS itself has a register set very similar to what is found in a typical 802.3 ethernet PHY, but this register set memory-mapped instead of lying on an mdio bus. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: pcs: add new PCS driver for altera TSE PCSMaxime Chevallier5-0/+206
The Altera Triple Speed Ethernet has a SGMII/1000BaseC PCS that can be integrated in several ways. It can either be part of the TSE MAC's address space, accessed through 32 bits accesses on the mapped mdio device 0, or through a dedicated 16 bits register set. This driver allows using the TSE PCS outside of altera TSE's driver, since it can be used standalone by other MACs. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: altera: tse: cosmetic change to use reverse xmas tree orderingMaxime Chevallier2-22/+23
Make the driver code cleaner through a strictly cosmetic change, using he reverse xmas tree variable declaration ordering. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05dt-bindings: net: Convert Altera TSE bindings to yamlMaxime Chevallier2-113/+141
Convert the bindings for the Altera Triple-Speed Ethernet to yaml. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-04Merge tag 'wireless-next-2022-09-03' of ↵David S. Miller71-7097/+26678
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== drivers - rtw89: large update across the map, e.g. coex, pci(e), etc. - ath9k: uninit memory read fix - ath10k: small peer map fix and a WCN3990 device fix - wfx: underflow stack - the "change MAC address while IFF_UP" change from James we discussed - more MLO work, including a set of fixes for the previous code, now that we have more code we can exercise it more - prevent some features with MLO that aren't ready yet (AP_VLAN and 4-address connections) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03wifi: mac80211_hwsim: fix multi-channel handling in netlink RXJohannes Berg1-22/+4
In netlink RX, now that we can actually have multiple channel contexts for MLO, things don't work well as we only keep a single pointer, and then on link switching we might NULL it, and hit the return if the channel is NULL. However, we already use mac80211_hwsim_tx_iter() which deals with all this, so remove the test and adjust the remaining code a bit. This then means we no longer use the chanctx pointer, so remove it as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: call drv_sta_state() under sdata_lock() in reconfigJohannes Berg1-15/+13
Currently, other paths calling drv_sta_state() hold the mutex and therefore drivers can assume that, and look at links with that protection. Fix that for the reconfig path as well; to do it more easily use ieee80211_reconfig_stations() for the AP/AP_VLAN station reconfig as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: nl80211: add MLD address to assoc BSS entriesJohannes Berg2-2/+6
Add an MLD address attribute to BSS entries that the interface is currently associated with to help userspace figure out what's going on. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: mlme: refactor QoS settings codeJohannes Berg2-13/+27
Refactor the code to apply QoS settings to the driver so we can call it on link switch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: warn on invalid link addressJohannes Berg1-0/+2
Catch the bugs fixed in mac80211 by the previous commits and warn if an invalid address is added (or removed). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: fix double SW scan stopJohannes Berg1-1/+1
When we stop a not-yet-started scan, we erroneously call into the driver, causing a sequence of sw_scan_start() followed by sw_scan_complete() twice. This will cause a warning in hwsim with next in line commit that validates the address passed to wmediumd/virtio. Fix this by doing the calls only if we were actually scanning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: mlme: assign link address correctlyJohannes Berg1-3/+2
Right now, we assign the link address only after we add the link to the driver, which is quite obviously wrong. It happens to work in many cases because it gets updated immediately, and then link_conf updates may update it, but it's clearly not really right. Set the link address during ieee80211_mgd_setup_link() so it's set before telling the driver about the link. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: move link code to a new fileJohannes Berg4-254/+274
We probably should've done that originally, we already have about 300 lines of code there, and will add more. Move all the link code we wrote to a new file. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: refactor RX a bitJohannes Berg1-11/+15
Refactor some common RX functionality between the netlink and non-netlink paths, adding the special hwsim TLV (if compiled) also in the netlink path. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: check STA magic in change_sta_linksJohannes Berg1-0/+2
Just as an additional check that mac80211 isn't doing anything strange, add a check of the STA magic (which gets assigned when the station is added, and cleared when the station is removed). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: remove unused arg to ieee80211_chandef_eht_operJohannes Berg3-6/+4
We don't need the sdata argument, and it doesn't make any sense for a direct conversion from one value to another, so just remove the argument Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: remove multicast workaroundJohannes Berg1-6/+1
Now that we have proper multicast TX in mac80211, there's no longer a need to fake something here. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: nl80211: remove redundant err variableJinpeng Cui1-4/+1
Return value from rdev_set_mcast_rate() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: Support POWERED_ADDR_CHANGE featureJames Prestwood2-2/+71
Adds support in mac80211 for NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE. The motivation behind this functionality is to fix limitations of address randomization on frequencies which are disallowed in world roaming. The way things work now, if a client wants to randomize their address per-connection it must power down the device, change the MAC, and power back up. Here lies a problem since powering down the device may result in frequencies being disabled (until the regdom is set). If the desired BSS is on one such frequency the client is unable to connect once the phy is powered again. For mac80211 based devices changing the MAC while powered is possible but currently disallowed (-EBUSY). This patch adds some logic to allow a MAC change while powered by removing the interface, changing the MAC, and adding it again. mac80211 will advertise support for this feature so userspace can determine the best course of action e.g. disallow address randomization on certain frequencies if not supported. There are certain limitations put on this which simplify the logic: - No active connection - No offchannel work, including scanning. Signed-off-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: nl80211: Add POWERED_ADDR_CHANGE featureJames Prestwood1-0/+9
Add a new extended feature bit signifying that the wireless hardware supports changing the MAC address while the underlying net_device is powered. Note that this has a different meaning from IFF_LIVE_ADDR_CHANGE as additional restrictions might be imposed by the hardware, such as: - No connection is active on this interface, carrier is off - No scan is in progress - No offchannel operations are in progress Signed-off-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: prevent 4-addr use on MLDsJohannes Berg2-0/+11
We haven't tried this yet, and it's not very likely to work well right now, so for now disable 4-addr use on interfaces that are MLDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220902161143.f2e4cc2efaa1.I5924e8fb44a2d098b676f5711b36bbc1b1bd68e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: prevent VLANs on MLDsJohannes Berg1-0/+5
Do not allow VLANs to be added to AP interfaces that are MLDs, this isn't going to work because the link structs aren't propagated to the VLAN interfaces yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220902161144.8c88531146e9.If2ef9a3b138d4f16ed2fda91c852da156bdf5e4d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03Merge branch 'net_sched-redundant-resource-cleanups'David S. Miller2-44/+17
Zhengchao Shao says: ==================== net: sched: remove redundant resource cleanup when init() fails qdisc_create() calls .init() to initialize qdisc. If the initialization fails, qdisc_create() will call .destroy() to release resources. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03net: sched: htb: remove redundant resource cleanup in htb_init()Zhengchao Shao1-27/+9
If htb_init() fails, qdisc_create() invokes htb_destroy() to clear resources. Therefore, remove redundant resource cleanup in htb_init(). Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()Zhengchao Shao1-17/+8
If fq_codel_init() fails, qdisc_create() invokes fq_codel_destroy() to clear resources. Therefore, remove redundant resource cleanup in fq_codel_init(). Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03net: fec: add stop mode support for imx8 platformWei Fang2-0/+39
The current driver support stop mode by calling machine api. The patch add dts support to set GPR register for stop request. imx8mq enter stop/exit stop mode by setting GPR bit, which can be accessed by A core. imx8qm enter stop/exit stop mode by calling IMX_SC ipc APIs that communicate with M core ipc service, and the M core set the related GPR bit at last. Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03r8152: Add MAC passthrough support for Lenovo Travel HubAndré Apitzsch1-0/+2
The Lenovo USB-C Travel Hub supports MAC passthrough. Signed-off-by: André Apitzsch <git@apitzsch.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03net/ipv4: Use __DECLARE_FLEX_ARRAY() helperGustavo A. R. Silva1-14/+6
We now have a cleaner way to keep compatibility with user-space (a.k.a. not breaking it) when we need to keep in place a one-element array (for its use in user-space) together with a flexible-array member (for its use in kernel-space) without making it hard to read at the source level. This is through the use of the new __DECLARE_FLEX_ARRAY() helper macro. The size and memory layout of the structure is preserved after the changes. See below. Before changes: $ pahole -C ip_msfilter net/ipv4/igmp.o struct ip_msfilter { union { struct { __be32 imsf_multiaddr_aux; /* 0 4 */ __be32 imsf_interface_aux; /* 4 4 */ __u32 imsf_fmode_aux; /* 8 4 */ __u32 imsf_numsrc_aux; /* 12 4 */ __be32 imsf_slist[1]; /* 16 4 */ }; /* 0 20 */ struct { __be32 imsf_multiaddr; /* 0 4 */ __be32 imsf_interface; /* 4 4 */ __u32 imsf_fmode; /* 8 4 */ __u32 imsf_numsrc; /* 12 4 */ __be32 imsf_slist_flex[0]; /* 16 0 */ }; /* 0 16 */ }; /* 0 20 */ /* size: 20, cachelines: 1, members: 1 */ /* last cacheline: 20 bytes */ }; After changes: $ pahole -C ip_msfilter net/ipv4/igmp.o struct ip_msfilter { __be32 imsf_multiaddr; /* 0 4 */ __be32 imsf_interface; /* 4 4 */ __u32 imsf_fmode; /* 8 4 */ __u32 imsf_numsrc; /* 12 4 */ union { __be32 imsf_slist[1]; /* 16 4 */ struct { struct { } __empty_imsf_slist_flex; /* 16 0 */ __be32 imsf_slist_flex[0]; /* 16 0 */ }; /* 16 0 */ }; /* 16 4 */ /* size: 20, cachelines: 1, members: 5 */ /* last cacheline: 20 bytes */ }; In the past, we had to duplicate the whole original structure within a union, and update the names of all the members. Now, we just need to declare the flexible-array member to be used in kernel-space through the __DECLARE_FLEX_ARRAY() helper together with the one-element array, within a union. This makes the source code more clean and easier to read. Link: https://github.com/KSPP/linux/issues/193 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03net/sched: cls_api: remove redundant 0 check in tcf_qevent_init()Zhengchao Shao1-3/+0
tcf_qevent_parse_block_index() never returns a zero block_index. Therefore, it is unnecessary to check the value of block_index in tcf_qevent_init(). Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220901011617.14105-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-03net: lantiq_etop: Fix return type for implementation of ndo_start_xmitGUO Zihua1-1/+1
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic. ltq_etop_tx() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly. Signed-off-by: GUO Zihua <guozihua@huawei.com> Link: https://lore.kernel.org/r/20220902081521.59867-1-guozihua@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-03net: sunplus: Fix return type for implementation of ndo_start_xmitGUO Zihua1-1/+2
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic. spl2sw_ethernet_start_xmit() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly. Signed-off-by: GUO Zihua <guozihua@huawei.com> Link: https://lore.kernel.org/r/20220902081550.60095-1-guozihua@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-20 22:53:03 +0300