summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-03-07Linux 4.5-rc7Linus Torvalds1-1/+1
2016-03-07Merge tag 'armsoc-fixes' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fix from Olof Johansson: "Tiny fixes branch this week, in fact only one patch. Turns out the USB support for a Renesas board was developed on a pre-release board that ended up being changed before shipping. To avoid breakage on those boards, and avoid confusion, it's a reasonable idea to patch now instead of later. There are no known users of the pre-release variant any more" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: porter: remove enable prop from HS-USB device node
2016-03-07Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds3-0/+6
Pull ARM fixes from Russell King: "Just two ARM fixes this time: one to fix the hyp-stub for older ARM CPUs, and another to fix the set_memory_xx() permission functions to deal with zero sizes correctly" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8544/1: set_memory_xx fixes ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs
2016-03-06Merge branch 'for-linus' of ↵Linus Torvalds7-3/+49
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph fix from Sage Weil: "This is a final commit we missed to align the protocol compatibility with the feature bits. It decodes a few extra fields in two different messages and reports EIO when they are used (not yet supported)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 support
2016-03-06Merge tag 'upstream-4.5-rc7' of git://git.infradead.org/linux-ubifsLinus Torvalds1-1/+1
Pull UBI fix from Richard Weinberger: "This contains a single bug fix for UBI" * tag 'upstream-4.5-rc7' of git://git.infradead.org/linux-ubifs: ubi: Fix out of bounds write in volume update code
2016-03-06Merge branch 'for-linus-4.5-rc7' of ↵Linus Torvalds3-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fixes from Richard Weinberger: "This contains three bug/build fixes" * 'for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: use %lx format specifiers for unsigned longs um: Export pm_power_off Revert "um: Fix get_signal() usage"
2016-03-06Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds5-14/+18
Pull MIPS fixes from Ralf Baechle: "Another round of fixes for 4.5: - Fix the use of an undocumented syntactial variant of the .type pseudo op which is not supported by the LLVM assembler. - Fix invalid initialization on S-cache-less systems. - Fix possible information leak from the kernel stack for SIGFPE. - Fix handling of copy_{from,to}_user() return value in KVM - Fix the last instance of irq_to_gpio() which now was causing build errors" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp' MIPS: kvm: Fix ioctl error handling. MIPS: scache: Fix scache init with invalid line size. MIPS: Avoid variant of .type unsupported by LLVM Assembler MIPS: jz4740: Fix surviving instance of irq_to_gpio()
2016-03-06Merge tag 'powerpc-4.5-5' of ↵Linus Torvalds3-2/+16
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - cxl: Fix PSL timebase synchronization detection from Frederic Barrat - Fix oops when destroying hw_breakpoint event from Ravi Bangoria - Avoid lbarx on e5500 from Scott Wood * tag 'powerpc-4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/fsl-book3e: Avoid lbarx on e5500 powerpc/hw_breakpoint: Fix oops when destroying hw_breakpoint event cxl: Fix PSL timebase synchronization detection
2016-03-06Merge branch 'i2c/for-current' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "One I2C bugfix ensuring correct memory allocation in a driver" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: brcmstb: allocate correct amount of memory for regmap
2016-03-06Merge tag 'usb-4.5-rc7' of ↵Linus Torvalds7-1026/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB driver ids for 4.5-rc7, and the removal of a driver we merged in 4.5-rc1 but it turns out it's not needed as the hardware is the same as a driver we already have in the tree. This was only figured out after doing a lot of cleanup on it, gotta love vendor-provided drivers... The new device ids for the devices for this driver will be added later on when testing is completed, but for now, we will remove the driver to keep people from accidentally cleaning it up. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: qcserial: add Sierra Wireless EM74xx device ID Revert "USB: serial: add Moxa UPORT 11x0 driver" USB: serial: option: add support for Quectel UC20 USB: serial: option: add support for Telit LE922 PID 0x1045 USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3) usb: chipidea: otg: change workqueue ci_otg as freezable
2016-03-06um: use %lx format specifiers for unsigned longsColin Ian King1-2/+2
static analysis from cppcheck detected %x being used for unsigned longs: [arch/x86/um/os-Linux/task_size.c:112]: (warning) %x in format string (no. 1) requires 'unsigned int' but the argument type is 'unsigned long'. Use %lx instead of %x Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-03-06um: Export pm_power_offRichard Weinberger1-0/+1
...modules are using this symbol. Export it like all other archs to. Signed-off-by: Richard Weinberger <richard@nod.at>
2016-03-06Revert "um: Fix get_signal() usage"Richard Weinberger1-1/+1
Commit db2f24dc240856fb1d78005307f1523b7b3c121b was plain wrong. I did not realize the we are allowed to loop here. In fact we have to loop and must not return to userspace before all SIGSEGVs have been delivered. Other archs do this directly in their entry code, UML does it here. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-03-05ubi: Fix out of bounds write in volume update codeRichard Weinberger1-1/+1
ubi_start_leb_change() allocates too few bytes. ubi_more_leb_change_data() will write up to req->upd_bytes + ubi->min_io_size bytes. Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-03-05Merge tag 'sound-4.5-rc7' of ↵Linus Torvalds12-53/+348
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "It's our tradition to get a high volume of fixes late at rc7: this time, X32 ABI breakage was found and this resulted in a high number LOCs. The necessary changes to ALSA core codes were fairly straightforward, and more importantly, they are specific to X32, thus should be safe to apply. Other than that, rather a collection of small fixes: - Removal of the code that blocks too long at closing the OSS sequencer client (which was spotted by syzkaller, unsurprisingly) - Fixes races at HD-audio HDMI i915 audio binding - a few HDSP/HDPM zero-division fixes - Quirks for HD-audio and USB-audio as usual" * tag 'sound-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - hdmi defer to register acomp eld notifier ALSA: hda - hdmi add wmb barrier for audio component ALSA: hda - Fix mic issues on Acer Aspire E1-472 ALSA: seq: oss: Don't drain at closing a client ALSA: usb-audio: Add a quirk for Plantronics DA45 ALSA: hdsp: Fix wrong boolean ctl value accesses ALSA: hdspm: Fix zero-division ALSA: hdspm: Fix wrong boolean ctl value accesses ALSA: timer: Fix ioctls for X32 ABI ALSA: timer: Fix broken compat timer user status ioctl ALSA: rawmidi: Fix ioctls X32 ABI ALSA: rawmidi: Use comapt_put_timespec() ALSA: pcm: Fix ioctls for X32 ABI ALSA: ctl: Fix ioctls for X32 ABI
2016-03-05Merge tag 'dmaengine-fix-4.5-rc7' of ↵Linus Torvalds1-1/+7
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fix from Vinod Koul: "One minor fix on pxa driver to fix the cyclic dma tranfers" * tag 'dmaengine-fix-4.5-rc7' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: pxa_dma: fix cyclic transfers
2016-03-05Merge tag 'media/v4.5-4' of ↵Linus Torvalds6-34/+34
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - some last time changes before we stablize the new entity function integer numbers at uAPI - probe: fix erroneous return value on i2c/adp1653 driver - fix tx 5v detect regression on adv7604 driver - fix missing unlock on error in vpfe_prepare_pipeline() on davinci_vpfe driver * tag 'media/v4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] media: Sanitise the reserved fields of the G_TOPOLOGY IOCTL arguments [media] media.h: postpone connectors entities [media] media.h: use hex values for range offsets, move connectors base up. [media] adv7604: fix tx 5v detect regression [media] media.h: get rid of MEDIA_ENT_F_CONN_TEST [media] [for,v4.5] media.h: increase the spacing between function ranges [media] media: i2c/adp1653: probe: fix erroneous return value [media] media: davinci_vpfe: fix missing unlock on error in vpfe_prepare_pipeline()
2016-03-05Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds1-4/+11
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvcimm fix from Dan Williams: "One straggling fix for NVDIMM support. The KVM/QEMU enabling for NVDIMMs has recently reached the point where it is able to accept some ACPI _DSM requests from a guest VM. However they immediately found that the 4.5-rc kernel is unusable because the kernel's 'nfit' driver fails to load upon seeing a valid "not supported" response from the virtual BIOS for an address range scrub command. It is not mandatory that a platform implement address range scrubbing, so this fix from Vishal properly treats the 'not supported' response as 'skip scrubbing and continue loading the driver'" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: Continue init even if ARS commands are unimplemented
2016-03-05Merge tag 'scsi-fixes' of ↵Linus Torvalds2-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two fairly simple fixes. One is a regression with ipr firmware loading caused by one of the trivial patches in the last merge window which failed to strip the \n from the file name string, so now the firmware loader no longer works leading to a lot of unhappy ipr users; fix by stripping the \n. The second is a memory leak within SCSI: the BLK_PREP_INVALID state was introduced a recent fix but we forgot to account for it correctly when freeing state, resulting in memory leakage. Add the correct state freeing in scsi_prep_return()" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ipr: Fix regression when loading firmware SCSI: Free resources when we return BLKPREP_INVALID
2016-03-05Merge branch 'for-4.5-fixes' of ↵Linus Torvalds8-59/+171
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Assorted fixes for libata drivers. - Turns out HDIO_GET_32BIT ioctl was subtly broken all along. - Recent update to ahci external port handling was incorrectly marking hotpluggable ports as external making userland handle devices connected to those ports incorrectly. - ahci_xgene needs its own irq handler to work around a hardware erratum. libahci updated to allow irq handler override. - Misc driver specific updates" * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: ahci: don't mark HotPlugCapable Ports as external/removable ahci: Workaround for ThunderX Errata#22536 libata: Align ata_device's id on a cacheline Adding Intel Lewisburg device IDs for SATA pata-rb532-cf: get rid of the irq_to_gpio() call libata: fix HDIO_GET_32BIT ioctl ahci_xgene: Implement the workaround to fix the missing of the edge interrupt for the HOST_IRQ_STAT. ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci. libahci: Implement the capability to override the generic ahci interrupt handler.
2016-03-05Merge branch 'for-linus2' of git://git.kernel.dk/linux-blockLinus Torvalds10-148/+341
Pull block fixes from Jens Axboe: "Round 2 of this. I cut back to the bare necessities, the patch is still larger than it usually would be at this time, due to the number of NVMe fixes in there. This pull request contains: - The 4 core fixes from Ming, that fix both problems with exceeding the virtual boundary limit in case of merging, and the gap checking for cloned bio's. - NVMe fixes from Keith and Christoph: - Regression on larger user commands, causing problems with reading log pages (for instance). This touches both NVMe, and the block core since that is now generally utilized also for these types of commands. - Hot removal fixes. - User exploitable issue with passthrough IO commands, if !length is given, causing us to fault on writing to the zero page. - Fix for a hang under error conditions - And finally, the current series regression for umount with cgroup writeback, where the final flush would happen async and hence open up window after umount where the device wasn't consistent. fsck right after umount would show this. From Tejun" * 'for-linus2' of git://git.kernel.dk/linux-block: block: support large requests in blk_rq_map_user_iov block: fix blk_rq_get_max_sectors for driver private requests nvme: fix max_segments integer truncation nvme: set queue limits for the admin queue writeback: flush inode cgroup wb switches instead of pinning super_block NVMe: Fix 0-length integrity payload NVMe: Don't allow unsupported flags NVMe: Move error handling to failed reset handler NVMe: Simplify device reset failure NVMe: Fix namespace removal deadlock NVMe: Use IDA for namespace disk naming NVMe: Don't unmap controller registers on reset block: merge: get the 1st and last bvec via helpers block: get the 1st and last bvec via helpers block: check virt boundary in bio_will_gap() block: bio: introduce helpers to get the 1st and last bvec
2016-03-05Merge tag 'for-linus' of ↵Linus Torvalds4-23/+30
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Additional 4.5-rc6 fixes. I have four patches today. I had previously thought I had submitted two of them last week, but they were accidentally skipped :-(. - One fix to an error path in the core - One fix for RoCE in the core - Two related fixes for the core/mlx5" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/core: Use GRH when the path hop-limit > 0 IB/{core, mlx5}: Fix input len in vendor part of create_qp/srq IB/mlx5: Avoid using user-index for SRQs IB/core: Fix missed clean call in registration path
2016-03-05Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds15-35/+60
Pull drm fixes from Dave Airlie: "This contains one i915 patch twice, as I merged it locally for testing, and then pulled some stuff in on top, and then Jani sent to me, I didn't think it was worth redoing all the merges of what I had tested. Summary: - amdgpu/radeon fixes for some more power management and VM races. - Two i915 fixes, one for the a recent regression, one another power management fix for skylake. - Two tegra dma mask fixes for a regression. - One ast fix for a typo I made transcribing the userspace driver, that I'd like to get into stable so I don't forget about it" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: gpu: host1x: Set DMA ops on device creation gpu: host1x: Set DMA mask drm/amdgpu: return from atombios_dp_get_dpcd only when error drm/amdgpu/cz: remove commented out call to enable vce pg drm/amdgpu/powerplay/cz: enable/disable vce dpm independent of vce pg drm/amdgpu/cz: enable/disable vce dpm even if vce pg is disabled drm/amdgpu/gfx8: specify which engine to wait before vm flush drm/amdgpu: apply gfx_v8 fixes to gfx_v7 as well drm/amd/powerplay: send event to notify powerplay all modules are initialized. drm/amd/powerplay: export AMD_PP_EVENT_COMPLETE_INIT task to amdgpu. drm/radeon/pm: update current crtc info after setting the powerstate drm/amdgpu/pm: update current crtc info after setting the powerstate drm/i915: Balance assert_rpm_wakelock_held() for !IS_ENABLED(CONFIG_PM) drm/i915/skl: Fix power domain suspend sequence drm/ast: Fix incorrect register check for DRAM width drm/i915: Balance assert_rpm_wakelock_held() for !IS_ENABLED(CONFIG_PM)
2016-03-05Merge tag 'pm+acpi-4.5-rc7' of ↵Linus Torvalds4-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "Two build fixes for cpufreq drivers (including one for breakage introduced recently) and a fix for a graph tracer crash when used over suspend-to-RAM on x86. Specifics: - Prevent the graph tracer from crashing when used over suspend-to- RAM on x86 by pausing it before invoking do_suspend_lowlevel() and un-pausing it when that function has returned (Todd Brandt). - Fix build issues in the qoriq and mediatek cpufreq drivers related to broken dependencies on THERMAL (Arnd Bergmann)" * tag 'pm+acpi-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / sleep / x86: Fix crash on graph trace through x86 suspend cpufreq: mediatek: allow building as a module cpufreq: qoriq: allow building as module with THERMAL=m
2016-03-05Merge tag 'arm64-fixes' of ↵Linus Torvalds2-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Will Deacon: "Arm64 fix for -rc7. Without it, our struct page array can overflow the vmemmap region on systems with a large PHYS_OFFSET. Nothing else on the radar at the moment, so hopefully that's it for 4.5 from us. Summary: Ensure struct page array fits within vmemmap area" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: vmemmap: use virtual projection of linear region
2016-03-05Merge tag 'for-linus-20160304' of git://git.infradead.org/linux-mtdLinus Torvalds6-52/+98
Pull jffs2 fixes from David Woodhouse: "This contains two important JFFS2 fixes marked for stable: - a lock ordering problem between the page lock and the internal f->sem mutex, which was causing occasional deadlocks in garbage collection - a scan failure causing moved directories to sometimes end up appearing to have hard links. There are also a couple of trivial MAINTAINERS file updates" * tag 'for-linus-20160304' of git://git.infradead.org/linux-mtd: MAINTAINERS: add maintainer entry for FREESCALE GPMI NAND driver Fix directory hardlinks from deleted directories jffs2: Fix page lock / f->sem deadlock Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin" MAINTAINERS: update Han's email
2016-03-05Merge branch 'for-linus-4.5' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fix from Chris Mason: "Filipe nailed down a problem where tree log replay would do some work that orphan code wasn't expecting to be done yet, leading to BUG_ON" * 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix loading of orphan roots leading to BUG_ON
2016-03-05Merge tag 'trace-fixes-v4.5-rc6' of ↵Linus Torvalds3-12/+17
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "A feature was added in 4.3 that allowed users to filter trace points on a tasks "comm" field. But this prevented filtering on a comm field that is within a trace event (like sched_migrate_task). When trying to filter on when a program migrated, this change prevented the filtering of the sched_migrate_task. To fix this, the event fields are examined first, and then the extra fields like "comm" and "cpu" are examined. Also, instead of testing to assign the comm filter function based on the field's name, the generic comm field is given a new filter type (FILTER_COMM). When this field is used to filter the type is checked. The same is done for the cpu filter field. Two new special filter types are added: "COMM" and "CPU". This allows users to still filter the tasks comm for events that have "comm" as one of their fields, in cases that users would like to filter sched_migrate_task on the comm of the task that called the event, and not the comm of the task that is being migrated" * tag 'trace-fixes-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not have 'comm' filter override event 'comm' field
2016-03-05nfit: Continue init even if ARS commands are unimplementedVishal Verma1-4/+11
If firmware doesn't implement any of the ARS commands, take that to mean that ARS is unsupported, and continue to initialize regions without bad block lists. We cannot make the assumption that ARS commands will be unconditionally supported on all NVDIMMs. Reported-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Tested-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-03-05ARM: 8544/1: set_memory_xx fixesMika Penttilä1-0/+3
Allow zero size updates. This makes set_memory_xx() consistent with x86, s390 and arm64 and makes apply_to_page_range() not to BUG() when loading modules. Signed-off-by: Mika Penttilä mika.penttila@nextfour.com Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-03-05Merge tag 'drm/tegra/for-4.5-rc7' of ↵Dave Airlie3-0/+10
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v4.5-rc7 Two small fixes that restore PRIME support. * tag 'drm/tegra/for-4.5-rc7' of git://anongit.freedesktop.org/tegra/linux: gpu: host1x: Set DMA ops on device creation gpu: host1x: Set DMA mask
2016-03-05MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp'Maciej W. Rozycki1-7/+6
Avoid sending a partially initialised `siginfo_t' structure along SIGFPE signals issued from `do_ov' and `do_trap_or_bp', leading to information leaking from the kernel stack. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: stable@vger.kernel.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-03-05Merge branches 'pm-cpufreq-fixes' and 'pm-sleep-fixes'Rafael J. Wysocki4-2/+11
* pm-cpufreq-fixes: cpufreq: mediatek: allow building as a module cpufreq: qoriq: allow building as module with THERMAL=m * pm-sleep-fixes: PM / sleep / x86: Fix crash on graph trace through x86 suspend
2016-03-04ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 supportYan, Zheng7-3/+49
Add support for the format change of MClientReply/MclientCaps. Also add code that denies access to inodes with pool_ns layouts. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-03-04gpu: host1x: Set DMA ops on device creationAlexandre Courbot1-0/+2
Currently host1x-instanciated devices have their dma_ops left to NULL, which makes any DMA operation (like buffer import) on ARM64 fallback to the dummy_dma_ops and fail with an error. This patch calls of_dma_configure() with the host1x node when creating such a device, so the proper DMA operations are set. Suggested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-03-04gpu: host1x: Set DMA maskAlexandre Courbot2-0/+8
The default DMA mask covers a 32 bits address range, but host1x devices can address a larger range on TK1 and TX1. Set the DMA mask to the range addressable when we use the IOMMU to prevent the use of bounce buffers. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-03-04tracing: Do not have 'comm' filter override event 'comm' fieldSteven Rostedt (Red Hat)3-12/+17
Commit 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and process names" added a 'comm' filter that will filter events based on the current tasks struct 'comm'. But this now hides the ability to filter events that have a 'comm' field too. For example, sched_migrate_task trace event. That has a 'comm' field of the task to be migrated. echo 'comm == "bash"' > events/sched_migrate_task/filter will now filter all sched_migrate_task events for tasks named "bash" that migrates other tasks (in interrupt context), instead of seeing when "bash" itself gets migrated. This fix requires a couple of changes. 1) Change the look up order for filter predicates to look at the events fields before looking at the generic filters. 2) Instead of basing the filter function off of the "comm" name, have the generic "comm" filter have its own filter_type (FILTER_COMM). Test against the type instead of the name to assign the filter function. 3) Add a new "COMM" filter that works just like "comm" but will filter based on the current task, even if the trace event contains a "comm" field. Do the same for "cpu" field, adding a FILTER_CPU and a filter "CPU". Cc: stable@vger.kernel.org # v4.3+ Fixes: 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and process names" Reported-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04ALSA: hda - hdmi defer to register acomp eld notifierLibin Yang1-12/+12
Defer to register acomp eld notifier until hdmi audio driver is fully ready. After registering eld notifier, gfx driver can use this callback function to notify audio driver the monitor connection event. However this action may happen when audio driver is adding the pins or doing other initialization. This is not always safe, however. For example, using per_pin->lock before the lock is initialized. Let's register the eld notifier after the initialization is done. Signed-off-by: Libin Yang <libin.yang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-04ALSA: hda - hdmi add wmb barrier for audio componentLibin Yang1-0/+5
To make sure audio_ptr is set before intel_audio_codec_enable() or intel_audio_codec_disable() calling pin_eld_notify(), this patch adds wmb barrier to prevent optimizing. Signed-off-by: Libin Yang <libin.yang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-04powerpc/fsl-book3e: Avoid lbarx on e5500Scott Wood1-0/+13
lbarx/stbcx. are implemented on e6500, but not on e5500. Likewise, SMT is on e6500, but not on e5500. So, avoid executing an unimplemented instruction by only locking when needed (i.e. in the presence of SMT). Signed-off-by: Scott Wood <oss@buserror.net>
2016-03-04Merge tag 'drm-intel-fixes-2016-03-03' of ↵Dave Airlie1-3/+3
git://anongit.freedesktop.org/drm-intel into drm-fixes Small conflict as I had the balance in my tree already for testing. * tag 'drm-intel-fixes-2016-03-03' of git://anongit.freedesktop.org/drm-intel: drm/i915: Balance assert_rpm_wakelock_held() for !IS_ENABLED(CONFIG_PM) drm/i915/skl: Fix power domain suspend sequence
2016-03-04Btrfs: fix loading of orphan roots leading to BUG_ONFilipe Manana1-1/+9
When looking for orphan roots during mount we can end up hitting a BUG_ON() (at root-item.c:btrfs_find_orphan_roots()) if a log tree is replayed and qgroups are enabled. This is because after a log tree is replayed, a transaction commit is made, which triggers qgroup extent accounting which in turn does backref walking which ends up reading and inserting all roots in the radix tree fs_info->fs_root_radix, including orphan roots (deleted snapshots). So after the log tree is replayed, when finding orphan roots we hit the BUG_ON with the following trace: [118209.182438] ------------[ cut here ]------------ [118209.183279] kernel BUG at fs/btrfs/root-tree.c:314! [118209.184074] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [118209.185123] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic ppdev xor raid6_pq evdev sg parport_pc parport acpi_cpufreq tpm_tis tpm psmouse processor i2c_piix4 serio_raw pcspkr i2c_core button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs] [118209.186318] CPU: 14 PID: 28428 Comm: mount Tainted: G W 4.5.0-rc5-btrfs-next-24+ #1 [118209.186318] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [118209.186318] task: ffff8801ec131040 ti: ffff8800af34c000 task.ti: ffff8800af34c000 [118209.186318] RIP: 0010:[<ffffffffa04237d7>] [<ffffffffa04237d7>] btrfs_find_orphan_roots+0x1fc/0x244 [btrfs] [118209.186318] RSP: 0018:ffff8800af34faa8 EFLAGS: 00010246 [118209.186318] RAX: 00000000ffffffef RBX: 00000000ffffffef RCX: 0000000000000001 [118209.186318] RDX: 0000000080000000 RSI: 0000000000000001 RDI: 00000000ffffffff [118209.186318] RBP: ffff8800af34fb08 R08: 0000000000000001 R09: 0000000000000000 [118209.186318] R10: ffff8800af34f9f0 R11: 6db6db6db6db6db7 R12: ffff880171b97000 [118209.186318] R13: ffff8801ca9d65e0 R14: ffff8800afa2e000 R15: 0000160000000000 [118209.186318] FS: 00007f5bcb914840(0000) GS:ffff88023edc0000(0000) knlGS:0000000000000000 [118209.186318] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [118209.186318] CR2: 00007f5bcaceb5d9 CR3: 00000000b49b5000 CR4: 00000000000006e0 [118209.186318] Stack: [118209.186318] fffffbffffffffff 010230ffffffffff 0101000000000000 ff84000000000000 [118209.186318] fbffffffffffffff 30ffffffffffffff 0000000000000101 ffff880082348000 [118209.186318] 0000000000000000 ffff8800afa2e000 ffff8800afa2e000 0000000000000000 [118209.186318] Call Trace: [118209.186318] [<ffffffffa042e2db>] open_ctree+0x1e37/0x21b9 [btrfs] [118209.186318] [<ffffffffa040a753>] btrfs_mount+0x97e/0xaed [btrfs] [118209.186318] [<ffffffff8108e1c0>] ? trace_hardirqs_on+0xd/0xf [118209.186318] [<ffffffff8117b87e>] mount_fs+0x67/0x131 [118209.186318] [<ffffffff81192d2b>] vfs_kern_mount+0x6c/0xde [118209.186318] [<ffffffffa0409f81>] btrfs_mount+0x1ac/0xaed [btrfs] [118209.186318] [<ffffffff8108e1c0>] ? trace_hardirqs_on+0xd/0xf [118209.186318] [<ffffffff8108c26b>] ? lockdep_init_map+0xb9/0x1b3 [118209.186318] [<ffffffff8117b87e>] mount_fs+0x67/0x131 [118209.186318] [<ffffffff81192d2b>] vfs_kern_mount+0x6c/0xde [118209.186318] [<ffffffff81195637>] do_mount+0x8a6/0x9e8 [118209.186318] [<ffffffff8119598d>] SyS_mount+0x77/0x9f [118209.186318] [<ffffffff81493017>] entry_SYSCALL_64_fastpath+0x12/0x6b [118209.186318] Code: 64 00 00 85 c0 89 c3 75 24 f0 41 80 4c 24 20 20 49 8b bc 24 f0 01 00 00 4c 89 e6 e8 e8 65 00 00 85 c0 89 c3 74 11 83 f8 ef 75 02 <0f> 0b 4c 89 e7 e8 da 72 00 00 eb 1c 41 83 bc 24 00 01 00 00 00 [118209.186318] RIP [<ffffffffa04237d7>] btrfs_find_orphan_roots+0x1fc/0x244 [btrfs] [118209.186318] RSP <ffff8800af34faa8> [118209.230735] ---[ end trace 83938f987d85d477 ]--- So fix this by not treating the error -EEXIST, returned when attempting to insert a root already inserted by the backref walking code, as an error. The following test case for xfstests reproduces the bug: seq=`basename $0` seqres=$RESULT_DIR/$seq echo "QA output created by $seq" tmp=/tmp/$$ status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 _cleanup() { _cleanup_flakey cd / rm -f $tmp.* } # get standard environment, filters and checks . ./common/rc . ./common/filter . ./common/dmflakey # real QA test starts here _supported_fs btrfs _supported_os Linux _require_scratch _require_dm_target flakey _require_metadata_journaling $SCRATCH_DEV rm -f $seqres.full _scratch_mkfs >>$seqres.full 2>&1 _init_flakey _mount_flakey _run_btrfs_util_prog quota enable $SCRATCH_MNT # Create 2 directories with one file in one of them. # We use these just to trigger a transaction commit later, moving the file from # directory a to directory b and doing an fsync against directory a. mkdir $SCRATCH_MNT/a mkdir $SCRATCH_MNT/b touch $SCRATCH_MNT/a/f sync # Create our test file with 2 4K extents. $XFS_IO_PROG -f -s -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foobar | _filter_xfs_io # Create a snapshot and delete it. This doesn't really delete the snapshot # immediately, just makes it inaccessible and invisible to user space, the # snapshot is deleted later by a dedicated kernel thread (cleaner kthread) # which is woke up at the next transaction commit. # A root orphan item is inserted into the tree of tree roots, so that if a # power failure happens before the dedicated kernel thread does the snapshot # deletion, the next time the filesystem is mounted it resumes the snapshot # deletion. _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/snap # Now overwrite half of the extents we wrote before. Because we made a snapshpot # before, which isn't really deleted yet (since no transaction commit happened # after we did the snapshot delete request), the non overwritten extents get # referenced twice, once by the default subvolume and once by the snapshot. $XFS_IO_PROG -c "pwrite -S 0xbb 4K 8K" $SCRATCH_MNT/foobar | _filter_xfs_io # Now move file f from directory a to directory b and fsync directory a. # The fsync on the directory a triggers a transaction commit (because a file # was moved from it to another directory) and the file fsync leaves a log tree # with file extent items to replay. mv $SCRATCH_MNT/a/f $SCRATCH_MNT/a/b $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/a $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar echo "File digest before power failure:" md5sum $SCRATCH_MNT/foobar | _filter_scratch # Now simulate a power failure and mount the filesystem to replay the log tree. # After the log tree was replayed, we used to hit a BUG_ON() when processing # the root orphan item for the deleted snapshot. This is because when processing # an orphan root the code expected to be the first code inserting the root into # the fs_info->fs_root_radix radix tree, while in reallity it was the second # caller attempting to do it - the first caller was the transaction commit that # took place after replaying the log tree, when updating the qgroup counters. _flakey_drop_and_remount echo "File digest before after failure:" # Must match what he got before the power failure. md5sum $SCRATCH_MNT/foobar | _filter_scratch _unmount_flakey status=0 exit Fixes: 2d9e97761087 ("Btrfs: use btrfs_get_fs_root in resolve_indirect_ref") Cc: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-03-04block: support large requests in blk_rq_map_user_iovChristoph Hellwig1-30/+61
This patch adds support for larger requests in blk_rq_map_user_iov by allowing it to build multiple bios for a request. This functionality used to exist for the non-vectored blk_rq_map_user in the past, and this patch reuses the existing functionality for it on the unmap side, which stuck around. Thanks to the iov_iter API supporting multiple bios is fairly trivial, as we can just iterate the iov until we've consumed the whole iov_iter. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jeff Lien <Jeff.Lien@hgst.com> Tested-by: Jeff Lien <Jeff.Lien@hgst.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-04block: fix blk_rq_get_max_sectors for driver private requestsChristoph Hellwig1-1/+1
Driver private request types should not get the artifical cap for the FS requests. This is important to use the full device capabilities for internal command or NVMe pass through commands. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jeff Lien <Jeff.Lien@hgst.com> Tested-by: Jeff Lien <Jeff.Lien@hgst.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Updated by me to use an explicit check for the one command type that does support extended checking, instead of relying on the ordering of the enum command values - as suggested by Keith. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-04nvme: fix max_segments integer truncationChristoph Hellwig1-2/+4
The block layer uses an unsigned short for max_segments. The way we calculate the value for NVMe tends to generate very large 32-bit values, which after integer truncation may lead to a zero value instead of the desired outcome. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jeff Lien <Jeff.Lien@hgst.com> Tested-by: Jeff Lien <Jeff.Lien@hgst.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-04nvme: set queue limits for the admin queueChristoph Hellwig1-10/+19
Factor out a helper to set all the device specific queue limits and apply them to the admin queue in addition to the I/O queues. Without this the command size on the admin queue is arbitrarily low, and the missing other limitations are just minefields waiting for victims. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jeff Lien <Jeff.Lien@hgst.com> Tested-by: Jeff Lien <Jeff.Lien@hgst.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-04writeback: flush inode cgroup wb switches instead of pinning super_blockTejun Heo3-13/+47
If cgroup writeback is in use, inodes can be scheduled for asynchronous wb switching. Before 5ff8eaac1636 ("writeback: keep superblock pinned during cgroup writeback association switches"), this could race with umount leading to super_block being destroyed while inodes are pinned for wb switching. 5ff8eaac1636 fixed it by bumping s_active while wb switches are in flight; however, this allowed in-flight wb switches to make umounts asynchronous when the userland expected synchronosity - e.g. fsck immediately following umount may fail because the device is still busy. This patch removes the problematic super_block pinning and instead makes generic_shutdown_super() flush in-flight wb switches. wb switches are now executed on a dedicated isw_wq so that they can be flushed and isw_nr_in_flight keeps track of the number of in-flight wb switches so that flushing can be avoided in most cases. v2: Move cgroup_writeback_umount() further below and add MS_ACTIVE check in inode_switch_wbs() as Jan an Al suggested. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Tahsin Erdogan <tahsin@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@ZenIV.linux.org.uk> Link: http://lkml.kernel.org/g/CAAeU0aNCq7LGODvVGRU-oU_o-6enii5ey0p1c26D1ZzYwkDc5A@mail.gmail.com Fixes: 5ff8eaac1636 ("writeback: keep superblock pinned during cgroup writeback association switches") Cc: stable@vger.kernel.org #v4.5 Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-04NVMe: Fix 0-length integrity payloadKeith Busch1-1/+1
A user could send a passthrough IO command with a metadata pointer to a namespace without metadata. With metadata length of 0, kmalloc returns ZERO_SIZE_PTR. Since that is not NULL, the driver would have set this as the bio's integrity payload, which causes an access fault on completion. This patch ignores the users metadata buffer if the namespace format does not support separate metadata. Reported-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-04NVMe: Don't allow unsupported flagsKeith Busch1-0/+4
The command flags can change the meaning of other fields in the command that the driver is not prepared to handle. Specifically, the user could passthrough an SGL flag, causing the controller to misinterpret the PRP list the driver created, potentially corrupting memory or data. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-04NVMe: Move error handling to failed reset handlerKeith Busch3-18/+50
This moves failed queue handling out of the namespace removal path and into the reset failure path, fixing a hanging condition if the controller fails or link down during del_gendisk. Previously the driver had to see the controller as degraded prior to calling del_gendisk to setup the queues to fail. But, if the controller happened to fail after this, there was no task to end outstanding requests. On failure, all namespace states are set to dead. This has capacity revalidate to 0, and ends all new requests with error status. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>