summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2007-05-20[ARM] 4397/1: S3C2443: remove SDI0/1 IRQ ambiguityBen Dooks1-1/+1
Change the name of the S3C2443_SDI1 to S3C2443_HSMMC to ensure that it is correctly identified. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4396/1: S3C2443: Add missing HCLK clocksBen Dooks1-1/+21
Add the clocks missing form HCLKCON back into the set of clocks being registered at initalisation time. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4395/1: S3C24XX: add include of <linux/sysdev.h> to relevant machinesBen Dooks5-0/+5
Include <linux/sysdev.h> in any machines that use the PM functions which require struct sys_device. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4388/1: no need for arm/mm mmap range checks for non-mmuGreg Ungerer1-0/+2
We don't need valid_phys_addr_range() or valid_mmap_phys_addr_range() for the !CONFIG_MMU case. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4387/1: fix /proc/cpuinfo formatting for pre-ARM7 partsGreg Ungerer1-1/+1
Fix the formating of the "CPU part" field to be consistent with the other fields for pre-ARM7 parts. One tab to many for them to all line up. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-17[ARM] ARMv6: add CPU_HAS_ASID configurationRussell King4-4/+12
Presently, we check for the minimum ARM architecture that we're building for to determine whether we need ASID support. This is wrong - if we're going to support a range of CPUs which include ARMv6 or higher, we need the ASID. Convert the checks to use a new configuration symbol, and arrange for ARMv6 and higher CPU entries to select it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-17[ARM] integrator: fix pci_v3 compile error with DEBUG_LLRussell King1-0/+1
If DEBUG_LL is enabled, we want to use get_irq_regs(), but this causes a build error due to the inline function missing. Add the necessary header file. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-17[ARM] gic: Fix gic cascade irq handlingRussell King1-11/+9
No need for the cascade irq function to have a "fastcall" annotation. Fix the range checking for valid IRQ numbers - comparing the value returned by the GIC with NR_IRQS is meaningless since we translate the GIC irq number to a Linux IRQ number afterwards. Check the GIC returned IRQ number is within limits first, then add the IRQ offset, and only then compare with NR_IRQS. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] Silence OMAP kernel configuration warningRussell King1-1/+1
arch/arm/mach-omap1/Kconfig:41:warning: 'select' used by config symbol 'MACH_OMAP_H3' refers to undefined symbol 'GPIOEXPANDER_OMAP' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] Update ARM syscallsRussell King2-0/+14
Add utimensat, signalfd, timerfd, eventfd syscalls. Add ignore defines for sync_file_range and fadvise64_64 which we implement differently. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] 4384/1: S3C2412/13 SPI registers offset correctionSandeep Sanjay Patil4-4/+16
Change the SPI Channel 1 register offset in s3c_spi1_resource[], and s3c2412_dma_mappings[]. Offset has to be 0x100 in s3c2412/13's case. Also, total SPI memory resource size changed to 0x24 for s3c2412/13. Signed-off-by: Sandeep Patil <psandeep.s@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] 4383/1: iop: fix usage of '__init' and 'inline' in iop filesDan Williams12-74/+38
WARNING: arch/arm/mach-iop13xx/built-in.o - Section mismatch: reference to .init.text:iop13xx_pcie_map_irq from .text between 'iop13xx_pci_setup' (at offset 0x7fc) and 'iop13xx_map_pci_memory' While fixing this warning I also recalled Adrian Bunk's recommendation to not use inline in .c files, as 'iop13xx_map_pci_memory' is needlessly inlined. Removing 'inline' uncovered some dead code so that is cleaned up as well. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] 4382/1: iop13xx: fix msi supportDan Williams1-1/+1
updates iop13xx msi support for a msi api change in 2.6.22 rev7: * update for Michael Ellerman's "MSI: arch must connect the irq and the msi_desc" patch Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] Remove Integrator/CP SMP platform supportRussell King5-277/+1
The Integrator/CP SMP platform support was never fully merged, and now it's causing build breakage. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] 4378/1: KS8695: Serial driver fixAndrew Victor1-2/+2
A fix for a really stupid typo in the KS8695 serial driver. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] 4376/1: Selects GENERIC_GPIO for ARCH_IXP4XX in KconfigMilan Svoboda1-0/+1
Selects GENERIC_GPIO for ARCH_IXP4XX in Kconfig. IXP4XX has generic GPIO support; however, ARCH_IXP4XX Kconfig entry currently does not select GENERIC_GPIO like other arch entries. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] 4375/1: sharpsl_pm: Fix compile warningsRichard Purdie1-4/+8
Fix compile warnings from sharpsl_pm.c. Attribute registration failure doesn't stop the driver working so just warn about it. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16arm: walk_stacktrace() needs to be exportedAl Viro1-0/+2
oprofile depends on having it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16fix uml-x86_64Al Viro3-3/+14
__NR_syscall_max is done in x86_64 asm-offsets; do an equivalent in uml kern_constants.h Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16audit_match_signal() and friends are used only if CONFIG_AUDITSYSCALL is setAl Viro1-0/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16m32r: __xchg() should be always_inlineAl Viro1-1/+2
it depends on elimination of unreachable branches in switch (by object size), so we must declare it always_inline Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16rpadlpar breakage - fallout of struct subsystem removalAl Viro1-2/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16em28xx and ivtv should depend on PCIAl Viro2-2/+2
.. because video-buf.c requires PCI, and VIDEO_EM28XX selects it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16missing includes in mlx4Al Viro4-0/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16missing dependencies for USB drivers in inputAl Viro5-0/+12
stuff that does select USB should depend on USB_ARCH_HAS_HCD, or we'll end up with unbuildable configs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16missing mm.h in fw-ohciAl Viro1-0/+1
need it for page_private(), not all targets have it pulled indirectly Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6Linus Torvalds23-204/+296
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Add .gitignore entry for syscalltab. sh64: generic quicklist support. sh64: Update cayman defconfig. sh64: Fixup sh-sci build. sh64: ppoll/pselect6() and restartable syscalls. sh64: dma-mapping updates. sh64: Fixups for the irq_regs changes. sh64: Wire up many new syscalls. spelling fixes: arch/sh64/ sh64: ROUND_UP macro cleanup in arch/sh64/kernel/pci_sh5.c
2007-05-16Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds19-682/+340
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: Use menuconfig objects: IDE sl82c105: Switch to ref counting API ide: remove ide_use_dma() ide: add missing validity checks for identify words 62 and 63 ide: remove ide_dma_enable() sl82c105: add speedproc() method and MWDMA0/1 support cs5530/sc1200: add ->speedproc support cs5530/sc1200: DMA support cleanup ide: use ide_tune_dma() part #2 cs5530/sc1200: add ->udma_filter methods ide: always disable DMA before tuning it pdc202xx_new: use ide_tune_dma() alim15x3: use ide_tune_dma() sis5513: PIO mode setup fixes serverworks: PIO mode setup fixes pdc202xx_old: rewrite mode programming code (v2)
2007-05-16Merge branch 'upstream-linus' of ↵Linus Torvalds6-56/+58
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: ucc_geth: eliminate max-speed, change interface-type to phy-connection-type smc911x: fix compilation breakage pasemi_mac: Fix local-mac-address parsing pasemi_mac: Terminate PCI ID list pasemi_mac: Interrupt ack fixes pasemi_mac: Fix register defines
2007-05-16x86: Fix discontigmem + non-HIGHMEM compileLinus Torvalds1-6/+3
It's not necessarily a very sane configuration, but people running "make randconfig" noticed it wouldn't compile. This fixes some obvious problems in discontig.c to allow a clean compile. Acked-by: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16Use menuconfig objects: IDEJan Engelhardt1-11/+4
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16sl82c105: Switch to ref counting APIAlan Cox1-3/+5
Not sure how this one got missed in the great purge some time ago but it did. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ide: remove ide_use_dma()Bartlomiej Zolnierkiewicz2-39/+5
ide_use_dma() duplicates a lot of ide_max_dma_mode() functionality and as all users of ide_use_dma() were converted to use ide_tune_dma() now it is possible to add missing checks to ide_tune_dma() and remove ide_use_dma() completely, so do it. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ide: add missing validity checks for identify words 62 and 63Bartlomiej Zolnierkiewicz1-2/+4
Check validity of identify words 62 and 63 before using them in ide_get_mode_mask(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ide: remove ide_dma_enable()Bartlomiej Zolnierkiewicz9-101/+11
* check ->speedproc return value in ide_tune_dma() * use ide_tune_dma() in cmd64x/cs5530/sc1200/siimage/sl82c105/scc_pata drivers * remove no longer needed ide_dma_enable() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16sl82c105: add speedproc() method and MWDMA0/1 supportSergei Shtylyov1-5/+66
Add the speedproc() method for setting transfer modes, modify config_for_dma() to call it and use ide_max_dma_mode() to select the best DMA mode. Add support for the multiword DMA modes 0 and 1, using the upper half of the 'drive_data' field to store the DMA timings to program into the drive control register when DMA is turned on for real. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16cs5530/sc1200: add ->speedproc supportBartlomiej Zolnierkiewicz2-46/+81
* add {cs5530,sc1200}_tunepio() for programming PIO timings * add {cs5530,sc1200}_tune_chipset() (->speedproc method) for setting transfer mode and convert {cs5530,sc1200}_config_dma() to use it * bump driver version Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16cs5530/sc1200: DMA support cleanupBartlomiej Zolnierkiewicz2-21/+13
sc1200.c: * remove open-coded variant of ide_dma_host_off() (== ->dma_host_off), it is not needed because ->dma_off_quietly calls ->dma_host_off * use ->dma_host_on (== ide_dma_host_on() for this driver) instead of open-coded variant, call it from the users of sc1200_config_dma2() [ there is no need to call ->dma_host_on in sc1200_config_dma() because core code takes care of calling ->ide_dma_on on successful execution of ->ide_dma_check ] * add comment about ->tuneproc interface abuse cs5530.c/sc1200.c: * core code takes care of calling ->dma_off_quietly before calling ->ide_dma_check so there is no need to call it in ->ide_dma_check methods * bump driver version Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ide: use ide_tune_dma() part #2Bartlomiej Zolnierkiewicz4-58/+4
Use ide_tune_dma() in ide-cris/it821x/pdc202xx_old/serverworks drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16cs5530/sc1200: add ->udma_filter methodsBartlomiej Zolnierkiewicz2-117/+89
CS5530/SC1200 specifies that two drives on the same cable cannot mix UDMA/MDMA. Add {cs5530,sc1200}_udma_filter() to handle this. This also makes it possible to remove open-coded best DMA mode selection and use standard ide_use_dma()/ide_max_dma_mode() helpers. While at it bump version numbers. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ide: always disable DMA before tuning itBartlomiej Zolnierkiewicz2-0/+2
ide_start_power_step() and set_using_dma() were missing ->dma_off_quietly call (comment in probe_hwif() states that DMA should be always cleared before tuning is attempted). Fix it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16pdc202xx_new: use ide_tune_dma()Bartlomiej Zolnierkiewicz1-28/+1
* remove code enabling IORDY and prefetch from config_chipset_for_dma(), as the comment states it has no real effect because these settings are overriden when the PIO mode is set (and for this driver ->autotune == 1 so PIO mode is always programmed) * use ide_tune_dma() in pdcnew_config_drive_xfer_rate() and remove no longer needed config_chipset_for_dma() There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16alim15x3: use ide_tune_dma()Bartlomiej Zolnierkiewicz1-62/+7
Use ide_tune_dma() in ali15x3_config_drive_for_dma() and remove all the open coded DMA tuning code and also config_chipset_for_dma(). Set ->atapi_dma flag correctly in init_hwif_common_ali15x3() so ide_tune_dma() can take care of checking if ATAPI DMA is allowed and remove open coded ATAPI DMA check from ali15x3_config_drive_for_dma(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16sis5513: PIO mode setup fixesBartlomiej Zolnierkiewicz1-49/+36
* limit max PIO mode to PIO4, this driver doesn't support PIO5 and attempt to program PIO5 by config_art_rwp_pio() could result in incorrect PIO timings being programmed and possibly the data corruption (for < ATA100 family chipsets PIO0 timings were used, for ATA100 and ATA100a - the random content of test1 variable was used, for ATA133 - MWDMA0 timings were used) * BUG() in sis5513_tune_chipset() if somebody tries to force unsupported PIO5, also cleanup this function a bit while at it * add comment about PIO0 timings for < ATA100 family chipsets * remove open-coded best PIO mode selection from config_art_rwp_pio(), it contained numerous bugs: - it didn't check for validity of id->eide_pio_modes and id->eide_pio_iordy before using them - it tried to found out maximum PIO mode basing on minimum IORDY cycle time (moreover wrong cycle times were used for PIO1/5) - it was overriding PIO blacklist and conservative PIO "downgrade" done by ide_get_best_pio_mode() * use sis5513_tune_drive() instead of config_art_rwp_pio() in sis5513_config_xfer_rate() so the correct PIO mode is also set on drive even if the device is not IORDY/DMA capable * config_art_rwp_pio() was always setting the best possible mode and not the wanted one - fix it and move ide_get_best_pio_mode() call to config_chipset_for_pio() * don't use ide_find_best_mode() in config_chipset_for_pio(), it was being overriden by config_art_rwp_pio() for the host timings anyway + we need to set the same PIO mode on the device and the host * pass correct "pio" argument (255 instead of 5) to sis5513_tune_drive() call in sis5513_config_xfer_rate() so the best PIO mode is set on the drive and not PIO4 * rename sis5513_tune_drive() to sis5513_tuneproc() and config_chipset_for_pio() to sis5513_tune_driver() * bump driver version Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16serverworks: PIO mode setup fixesBartlomiej Zolnierkiewicz1-53/+15
* limit max PIO mode to PIO4, this driver doesn't support PIO5 and attempt to program PIO5 by svwks_tune_chipset() could result in incorrect PIO timings being programmed and possibly the data corruption (it seems that the minimum possible values were used but I lack the datasheets to be sure) * select best PIO mode in svwks_tune_drive() and not in svwks_tune_chipset() when doing PIO autotuning (pio == 255) * don't try to tune PIO in config_chipset_for_dma() as ide_dma_enable() could return 1 if DMA was previously enabled (svwks_config_drive_xfer_rate() takes care of PIO tuning if no suitable DMA mode is found) * remove config_chipset_for_pio() and use svwks_tune_drive() instead, config_chipset_for_pio() contained numerous bugs when selecting PIO mode (luckily it was only used for devices limited to PIO by capabilities/BIOS): - it didn't check for validity of id->eide_pio_modes and id->eide_pio_iordy before using them - it tried to found out maximum PIO mode basing on minimum IORDY cycle time (moreover wrong cycle times were used for PIO0/1/5) - it was overriding PIO blacklist and conservative PIO "downgrade" done by ide_get_best_pio_mode() - if the max drive PIO was PIO5 then XFER_PIO_0/XFER_PIO_SLOW was selected (XFER_PIO_SLOW is not supported by svwks_tune_chipset() so the result was the same as if using XFER_PIO_5 => wrong PIO timings were set) - it was overriding drive->current_speed * bump driver version Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16pdc202xx_old: rewrite mode programming code (v2)Bartlomiej Zolnierkiewicz1-134/+44
This patch is based on the documentation (I would like to thank Promise for it) and also partially on the older vendor driver. Rewrite mode programming code: * disable 66MHz clock in pdc202xx_tune_chipset() so it is correctly disabled even if both devices on the channel are not DMA capable and after reset * enable/disable IORDY and PREFETCH bits in pdc202xx_tune_chipset() as they need to be setup correctly also for PIO only devices, plus IORDY wasn't disabled for non-IORDY devices and PREFETCH wasn't disabled for ATAPI devices * remove dead code for setting SYNC_ERDDY_EN bits from config_chipset_for_dma() (driver sets ->autotune to 1 so PIO modes are always programmed => lower nibble of register A never equals 4 => "chipset_is_set" is always true) * enable PIO mode programming for all ATAPI devices (it was limited to ->media == ide_cdrom devices) * remove extra reads of registers A/B/C, don't read register D et all * do clearing / programming of registers A/B/C in one go (gets rid of extra PCI config space read/write cycle) * set initial values of drive_conf/AP/BP/CP variables to zero (paranoia for the case when PCI reads fail) * remove XFER_UDMA6 to XFER_UDMA5 remapping case - it can't happen (ide_rate_filter() takes care of it) * fix XFER_MW_DMA0 timings (they were overclocked, use the official ones) * fix bitmasks for clearing bits of register B: - when programming DMA mode bit 0x10 of register B was cleared which resulted in overclocked PIO timing setting (iff PIO0 was used) - when programming PIO mode bits 0x18 weren't cleared so suboptimal timings were used for PIO1-4 if PIO0 was previously set (bit 0x10) and for PIO0/3/4 if PIO1/2 was previously set (bit 0x08) * add FIXME comment about missing locking for 66MHz clock register Also while at it: * remove unused defines * do a few cosmetic / CodingStyle fixes * bump driver version v2: * in pdc202xx_tune_chipset() the old content of drive configuration registers is used only by the debugging code so cover "drive_conf" PCI registers read by #if PDC202XX_DEBUG_DRIVE_INFO (Noticed by Sergei Shtylyov) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ucc_geth: eliminate max-speed, change interface-type to phy-connection-typeKim Phillips3-33/+26
It was agreed that phy-connection-type was a better name for the interface-type property, so this patch renames it. Also, the max-speed property name was determined too generic, and is therefore eliminated in favour of phy-connection-type derivation logic. includes corrections to copyright text. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-16smc911x: fix compilation breakageVitaly Wool1-4/+2
Looks like the new version of this patch has been overlooked, so I'm resending it. It just adapts the driver to the new IRQ API according to what Russell has pointed out. drivers/net/smc911x.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-) Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-16pasemi_mac: Fix local-mac-address parsingolof@lixom.net1-3/+14
Turns out we have an old version of firmware that stores the mac address in 'mac-address' as a string instead of a byte array. All versions that use local-mac-address should have it as byte array, so no need to do string parsing for that case. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-16pasemi_mac: Terminate PCI ID listolof@lixom.net1-0/+1
This caused some very interesting behaviour depending on what happened to be built at the same time. Add terminating empty entry to the list of IDs. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-11 01:37:57 +0300