summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-12-22net: stmmac: fix tc flower deletion for VLAN priority Rx steeringOng Boon Leong2-13/+90
[ Upstream commit aeb7c75cb77478fdbf821628e9c95c4baa9adc63 ] To replicate the issue:- 1) Add 1 flower filter for VLAN Priority based frame steering:- $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \ flower vlan_prio 0 hw_tc 0 2) Get the 'pref' id $ tc filter show dev $IFDEVNAME ingress 3) Delete a specific tc flower record (say pref 49151) $ tc filter del dev $IFDEVNAME parent ffff: pref 49151 From dmesg, we will observe kernel NULL pointer ooops [ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 197.171367] #PF: supervisor read access in kernel mode [ 197.171367] #PF: error_code(0x0000) - not-present page [ 197.171367] PGD 0 P4D 0 [ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI <snip> [ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac] <snip> [ 197.171367] Call Trace: [ 197.171367] <TASK> [ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac] [ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac] [ 197.171367] tc_setup_cb_destroy+0xb3/0x180 [ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] The above issue is due to previous incorrect implementation of tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule() to get struct flow_rule *rule which is no longer valid for tc filter delete operation. struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(), this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload record for 'RX frame steering' tc flower, currently used for VLAN priority. The implementation has taken consideration for future extension to include other type RX frame steering such as EtherType based. v2: - Clean up overly extensive backtrace and rewrite git message to better explain the kernel NULL pointer issue. Fixes: 0e039f5cf86c ("net: stmmac: add RX frame steering based on VLAN priority in tc flower") Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22mac80211: fix lookup when adding AddBA extension elementJohannes Berg1-2/+3
[ Upstream commit 511ab0c1dfb260a6b17b8771109e8d63474473a7 ] We should be doing the HE capabilities lookup based on the full interface type so if P2P doesn't have HE but client has it doesn't get confused. Fix that. Fixes: 2ab45876756f ("mac80211: add support for the ADDBA extension element") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.010fc1d61137.If3a468145f29d670cb00a693bed559d8290ba693@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22cfg80211: Acquire wiphy mutex on regulatory workIlan Peer1-1/+6
[ Upstream commit e08ebd6d7b90ae81f21425ca39136f5b2272580f ] The function cfg80211_reg_can_beacon_relax() expects wiphy mutex to be held when it is being called. However, when reg_leave_invalid_chans() is called the mutex is not held. Fix it by acquiring the lock before calling the function. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211202152831.527686cda037.I40ad9372a47cbad53b4aae7b5a6ccc0dc3fddf8b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22mac80211: agg-tx: don't schedule_and_wake_txq() under sta->lockJohannes Berg1-2/+8
[ Upstream commit 06c41bda0ea14aa7fba932a9613c4ee239682cf0 ] When we call ieee80211_agg_start_txq(), that will in turn call schedule_and_wake_txq(). Called from ieee80211_stop_tx_ba_cb() this is done under sta->lock, which leads to certain circular lock dependencies, as reported by Chris Murphy: https://lore.kernel.org/r/CAJCQCtSXJ5qA4bqSPY=oLRMbv-irihVvP7A2uGutEbXQVkoNaw@mail.gmail.com In general, ieee80211_agg_start_txq() is usually not called with sta->lock held, only in this one place. But it's always called with sta->ampdu_mlme.mtx held, and that's therefore clearly sufficient. Change ieee80211_stop_tx_ba_cb() to also call it without the sta->lock held, by factoring it out of ieee80211_remove_tid_tx() (which is only called in this one place). This breaks the locking chain and makes it less likely that we'll have similar locking chain problems in the future. Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") Reported-by: Chris Murphy <lists@colorremedies.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211202152554.f519884c8784.I555fef8e67d93fff3d9a304886c4a9f8b322e591@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22drm/i915/display: Fix an unsigned subtraction which can never be negative.Harshit Mogalapalli1-1/+1
[ Upstream commit 53b3495273282aa844c4613d19c3b30558c70c84 ] smatch warning: drivers/gpu/drm/i915/display/intel_dmc.c:601 parse_dmc_fw() warn: unsigned 'fw->size - offset' is never less than zero Firmware size is size_t and offset is u32. So the subtraction is unsigned which can never be less than zero. Fixes: 3d5928a168a9 ("drm/i915/xelpd: Pipe A DMC plugging") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211210044129.12422-1-harshit.m.mogalapalli@oracle.com (cherry picked from commit 87bb2a410dcfb617b88e4695edf4beb6336dc314) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22drm/ast: potential dereference of null pointerJiasheng Jiang1-1/+4
[ Upstream commit fea3fdf975dd9f3e5248afaab8fe023db313f005 ] The return value of kzalloc() needs to be checked. To avoid use of null pointer '&ast_state->base' in case of the failure of alloc. Fixes: f0adbc382b8b ("drm/ast: Allocate initial CRTC state of the correct size") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211214014126.2211535-1-jiasheng@iscas.ac.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22mptcp: never allow the PM to close a listener subflowPaolo Abeni1-0/+3
[ Upstream commit b0cdc5dbcf2ba0d99785da5aabf1b17943805b8a ] Currently, when deleting an endpoint the netlink PM treverses all the local MPTCP sockets, regardless of their status. If an MPTCP listener socket is bound to the IP matching the delete endpoint, the listener TCP socket will be closed. That is unexpected, the PM should only affect data subflows. Additionally, syzbot was able to trigger a NULL ptr dereference due to the above: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 6550 Comm: syz-executor122 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xd7d/0x54a0 kernel/locking/lockdep.c:4897 Code: 0f 0e 41 be 01 00 00 00 0f 86 c8 00 00 00 89 05 69 cc 0f 0e e9 bd 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85 f3 2f 00 00 48 81 3b 20 75 17 8f 0f 84 52 f3 ff RSP: 0018:ffffc90001f2f818 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000018 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000a R12: 0000000000000000 R13: ffff88801b98d700 R14: 0000000000000000 R15: 0000000000000001 FS: 00007f177cd3d700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f177cd1b268 CR3: 000000001dd55000 CR4: 0000000000350ee0 Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5602 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x39/0x50 kernel/locking/spinlock.c:162 finish_wait+0xc0/0x270 kernel/sched/wait.c:400 inet_csk_wait_for_connect net/ipv4/inet_connection_sock.c:464 [inline] inet_csk_accept+0x7de/0x9d0 net/ipv4/inet_connection_sock.c:497 mptcp_accept+0xe5/0x500 net/mptcp/protocol.c:2865 inet_accept+0xe4/0x7b0 net/ipv4/af_inet.c:739 mptcp_stream_accept+0x2e7/0x10e0 net/mptcp/protocol.c:3345 do_accept+0x382/0x510 net/socket.c:1773 __sys_accept4_file+0x7e/0xe0 net/socket.c:1816 __sys_accept4+0xb0/0x100 net/socket.c:1846 __do_sys_accept net/socket.c:1864 [inline] __se_sys_accept net/socket.c:1861 [inline] __x64_sys_accept+0x71/0xb0 net/socket.c:1861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f177cd8b8e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f177cd3d308 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007f177ce13408 RCX: 00007f177cd8b8e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f177ce13400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f177ce1340c R13: 00007f177cde1004 R14: 6d705f706374706d R15: 0000000000022000 </TASK> Fix the issue explicitly skipping MPTCP socket in TCP_LISTEN status. Reported-and-tested-by: syzbot+e4d843bb96a9431e6331@syzkaller.appspotmail.com Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Fixes: 740d798e8767 ("mptcp: remove id 0 address") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/ebc7594cdd420d241fb2172ddb8542ba64717657.1639238695.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22selftest/net/forwarding: declare NETIFS p9 p10Hangbin Liu1-0/+2
[ Upstream commit 71da1aec215290e249d09c44c768df859f3a3bba ] The recent GRE selftests defined NUM_NETIFS=10. If the users copy forwarding.config.sample to forwarding.config directly, they will get error "Command line is not complete" when run the GRE tests, because create_netif_veth() failed with no interface name defined. Fix it by extending the NETIFS with p9 and p10. Fixes: 2800f2485417 ("selftests: forwarding: Test multipath hashing on inner IP pkts for GRE tunnel") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22net: dsa: mv88e6xxx: Unforce speed & duplex in mac_link_down()Marek Behún1-0/+4
[ Upstream commit 9d591fc028b6bddb38c6585874f331267cbdadae ] Commit 64d47d50be7a ("net: dsa: mv88e6xxx: configure interface settings in mac_config") removed forcing of speed and duplex from mv88e6xxx_mac_config(), where the link is forced down, and left it only in mv88e6xxx_mac_link_up(), by which time link is unforced. It seems that (at least on 88E6190) when changing cmode to 2500base-x, if the link is not forced down, but the speed or duplex are still forced, the forcing of new settings for speed & duplex doesn't take in mv88e6xxx_mac_link_up(). Fix this by unforcing speed & duplex in mv88e6xxx_mac_link_down(). Fixes: 64d47d50be7a ("net: dsa: mv88e6xxx: configure interface settings in mac_config") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22selftests/net: toeplitz: fix udp optionWillem de Bruijn1-1/+1
[ Upstream commit a8d13611b4a7b1b20d17bf2b9a89a3efcabde56c ] Tiny fix. Option -u ("use udp") does not take an argument. It can cause the next argument to silently be ignored. Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22net/sched: sch_ets: don't remove idle classes from the round-robin listDavide Caratti1-2/+2
[ Upstream commit c062f2a0b04d86c5b8c9d973bea43493eaca3d32 ] Shuang reported that the following script: 1) tc qdisc add dev ddd0 handle 10: parent 1: ets bands 8 strict 4 priomap 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 2) mausezahn ddd0 -A 10.10.10.1 -B 10.10.10.2 -c 0 -a own -b 00:c1:a0:c1:a0:00 -t udp & 3) tc qdisc change dev ddd0 handle 10: ets bands 4 strict 2 quanta 2500 2500 priomap 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 crashes systematically when line 2) is commented: list_del corruption, ffff8e028404bd30->next is LIST_POISON1 (dead000000000100) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 954 Comm: tc Not tainted 5.16.0-rc4+ #478 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000682f48 CR3: 00000001058be000 CR4: 0000000000350ef0 Call Trace: <TASK> ets_qdisc_change+0x58b/0xa70 [sch_ets] tc_modify_qdisc+0x323/0x880 rtnetlink_rcv_msg+0x169/0x4a0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1a5/0x280 netlink_sendmsg+0x257/0x4d0 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1f2/0x260 ___sys_sendmsg+0x7c/0xc0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7efdc8031338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffdf1ce9828 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000061b37a97 RCX: 00007efdc8031338 RDX: 0000000000000000 RSI: 00007ffdf1ce9890 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000078a940 R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000688880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev pcspkr i2c_i801 virtio_balloon i2c_smbus lpc_ich ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel serio_raw ghash_clmulni_intel ahci libahci libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: sch_ets] ---[ end trace f35878d1912655c2 ]--- RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000682f48 CR3: 00000001058be000 CR4: 0000000000350ef0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x4e00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- we can remove 'q->classes[i].alist' only if DRR class 'i' was part of the active list. In the ETS scheduler DRR classes belong to that list only if the queue length is greater than zero: we need to test for non-zero value of 'q->classes[i].qdisc->q.qlen' before removing from the list, similarly to what has been done elsewhere in the ETS code. Fixes: de6d25924c2a ("net/sched: sch_ets: don't peek at classes beyond 'nbands'") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22drm: simpledrm: fix wrong unit with pixel clockAlejandro Concepcion-Rodriguez1-1/+1
[ Upstream commit 5cf06065bd1f7b94fbb80e7eeb033899f77ab5ba ] Pixel clock has to be set in kHz. Signed-off-by: Alejandro Concepcion-Rodriguez <asconcepcion@acoro.eu> Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/6f8554ef-1305-0dda-821c-f7d2e5644a48@acoro.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22dmaengine: st_fdma: fix MODULE_ALIASAlyssa Ross1-1/+1
[ Upstream commit 822c9f2b833c53fc67e8adf6f63ecc3ea24d502c ] modprobe can't handle spaces in aliases. Fixes: 6b4cd727eaf1 ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support") Signed-off-by: Alyssa Ross <hi@alyssa.is> Link: https://lore.kernel.org/r/20211125154441.2626214-1-hi@alyssa.is Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22dmaengine: idxd: fix missed completion on abort pathDave Jiang1-1/+17
[ Upstream commit 8affd8a4b5ce356c8900cfb037674f3a4a11fbdb ] Ming reported that with the abort path of the descriptor submission, there can be a window where a completed descriptor can be missed to be completed by the irq completion thread: CPU A CPU B Submit (successful) Submit (fail) irq_process_work_list() // empty llist_abort_desc() // remove all descs from pending list irq_process_pending_llist() // empty exit idxd_wq_thread() with no processing Add opportunistic descriptor completion in the abort path in order to remove the missed completion. Fixes: 6b4b87f2c31a ("dmaengine: idxd: fix submission race window") Reported-by: Ming Li <ming4.li@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/163898288714.443911.16084982766671976640.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22selftests: Fix IPv6 address bind testsDavid Ahern1-3/+11
[ Upstream commit 28a2686c185e84b6aa6a4d9c9a972360eb7ca266 ] IPv6 allows binding a socket to a device then binding to an address not on the device (__inet6_bind -> ipv6_chk_addr with strict flag not set). Update the bind tests to reflect legacy behavior. Fixes: 34d0302ab861 ("selftests: Add ipv6 address bind tests to fcnal-test") Reported-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22selftests: Fix raw socket bind tests with VRFDavid Ahern1-1/+2
[ Upstream commit 0f108ae4452025fef529671998f6c7f1c4526790 ] Commit referenced below added negative socket bind tests for VRF. The socket binds should fail since the address to bind to is in a VRF yet the socket is not bound to the VRF or a device within it. Update the expected return code to check for 1 (bind failure) so the test passes when the bind fails as expected. Add a 'show_hint' comment to explain why the bind is expected to fail. Fixes: 75b2b2b3db4c ("selftests: Add ipv4 address bind tests to fcnal-test") Reported-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22selftests: Add duplicate config only for MD5 VRF testsDavid Ahern1-6/+20
[ Upstream commit 7e0147592b5c4f9e2eb8c54a7857a56d4863f74e ] Commit referenced below added configuration in the default VRF that duplicates a VRF to check MD5 passwords are properly used and fail when expected. That config should not be added all the time as it can cause tests to pass that should not (by matching on default VRF setup when it should not). Move the duplicate setup to a function that is only called for the MD5 tests and add a cleanup function to remove it after the MD5 tests. Fixes: 5cad8bce26e0 ("fcnal-test: Add TCP MD5 tests for VRF") Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22net: hns3: fix race condition in debugfsYufeng Mo2-6/+16
[ Upstream commit 6dde452bceca3f2ed2b33bc46a16ff5682a03a2e ] When multiple threads concurrently access the debugfs content, data and pointer exceptions may occur. Therefore, mutex lock protection is added for debugfs. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22net: hns3: fix use-after-free bug in hclgevf_send_mbx_msgJie Wang1-1/+2
[ Upstream commit 27cbf64a766e86f068ce6214f04c00ceb4db1af4 ] Currently, the hns3_remove function firstly uninstall client instance, and then uninstall acceletion engine device. The netdevice is freed in client instance uninstall process, but acceletion engine device uninstall process still use it to trace runtime information. This causes a use after free problem. So fixes it by check the instance register state to avoid use after free. Fixes: d8355240cf8f ("net: hns3: add trace event support for PF/VF mailbox") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22selftests: icmp_redirect: pass xfail=0 to log_test()Po-Hsu Lin1-1/+1
[ Upstream commit 3748939bce3fc7a15ef07161826507fbe410bb7a ] If any sub-test in this icmp_redirect.sh is failing but not expected to fail. The script will complain: ./icmp_redirect.sh: line 72: [: 1: unary operator expected This is because when the sub-test is not expected to fail, we won't pass any value for the xfail local variable in log_test() and thus it's empty. Fix this by passing 0 as the 4th variable to log_test() for non-xfail cases. v2: added fixes tag Fixes: 0a36a75c6818 ("selftests: icmp_redirect: support expected failures") Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22netdevsim: don't overwrite read only ethtool parmsFilip Pokryvka1-1/+4
[ Upstream commit ee60e626d536da4c710b3634afe68fe7c6d69b59 ] Ethtool ring feature has _max_pending attributes read-only. Set only read-write attributes in nsim_set_ringparam. This patch is useful, if netdevsim device is set-up using NetworkManager, because NetworkManager sends 0 as MAX values, as it is pointless to retrieve them in extra call, because they should be read-only. Then, the device is left in incosistent state (value > MAX). Fixes: a7fc6db099b5 ("netdevsim: support ethtool ring and coalesce settings") Signed-off-by: Filip Pokryvka <fpokryvk@redhat.com> Link: https://lore.kernel.org/r/20211210175032.411872-1-fpokryvk@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22inet_diag: fix kernel-infoleak for UDP socketsEric Dumazet1-3/+1
[ Upstream commit 71ddeac8cd1d217744a0e060ff520e147c9328d1 ] KMSAN reported a kernel-infoleak [1], that can exploited by unpriv users. After analysis it turned out UDP was not initializing r->idiag_expires. Other users of inet_sk_diag_fill() might make the same mistake in the future, so fix this in inet_sk_diag_fill(). [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:156 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670 instrument_copy_to_user include/linux/instrumented.h:121 [inline] copyout lib/iov_iter.c:156 [inline] _copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670 copy_to_iter include/linux/uio.h:155 [inline] simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519 __skb_datagram_iter+0x2cb/0x1280 net/core/datagram.c:425 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533 skb_copy_datagram_msg include/linux/skbuff.h:3657 [inline] netlink_recvmsg+0x660/0x1c60 net/netlink/af_netlink.c:1974 sock_recvmsg_nosec net/socket.c:944 [inline] sock_recvmsg net/socket.c:962 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1035 call_read_iter include/linux/fs.h:2156 [inline] new_sync_read fs/read_write.c:400 [inline] vfs_read+0x1631/0x1980 fs/read_write.c:481 ksys_read+0x28c/0x520 fs/read_write.c:619 __do_sys_read fs/read_write.c:629 [inline] __se_sys_read fs/read_write.c:627 [inline] __x64_sys_read+0xdb/0x120 fs/read_write.c:627 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] netlink_dump+0x3d5/0x16a0 net/netlink/af_netlink.c:2245 __netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:254 [inline] inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1343 sock_diag_rcv_msg+0x24a/0x620 netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:276 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] sock_write_iter+0x594/0x690 net/socket.c:1057 do_iter_readv_writev+0xa7f/0xc70 do_iter_write+0x52c/0x1500 fs/read_write.c:851 vfs_writev fs/read_write.c:924 [inline] do_writev+0x63f/0xe30 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Bytes 68-71 of 312 are uninitialized Memory access of size 312 starts at ffff88812ab54000 Data copied to user address 0000000020001440 CPU: 1 PID: 6365 Comm: syz-executor801 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 3c4d05c80567 ("inet_diag: Introduce the inet socket dumping routine") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20211209185058.53917-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22sch_cake: do not call cake_destroy() from cake_init()Eric Dumazet1-5/+1
[ Upstream commit ab443c53916730862cec202078d36fd4008bea79 ] qdiscs are not supposed to call their own destroy() method from init(), because core stack already does that. syzbot was able to trigger use after free: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock_common kernel/locking/mutex.c:586 [inline] WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740 Modules linked in: CPU: 0 PID: 21902 Comm: syz-executor189 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mutex_lock_common kernel/locking/mutex.c:586 [inline] RIP: 0010:__mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740 Code: 08 84 d2 0f 85 19 08 00 00 8b 05 97 38 4b 04 85 c0 0f 85 27 f7 ff ff 48 c7 c6 20 00 ac 89 48 c7 c7 a0 fe ab 89 e8 bf 76 ba ff <0f> 0b e9 0d f7 ff ff 48 8b 44 24 40 48 8d b8 c8 08 00 00 48 89 f8 RSP: 0018:ffffc9000627f290 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802315d700 RSI: ffffffff815f1db8 RDI: fffff52000c4fe44 RBP: ffff88818f28e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815ebb5e R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: ffffc9000627f458 R15: 0000000093c30000 FS: 0000555556abc400(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fda689c3303 CR3: 000000001cfbb000 CR4: 0000000000350ef0 Call Trace: <TASK> tcf_chain0_head_change_cb_del+0x2e/0x3d0 net/sched/cls_api.c:810 tcf_block_put_ext net/sched/cls_api.c:1381 [inline] tcf_block_put_ext net/sched/cls_api.c:1376 [inline] tcf_block_put+0xbc/0x130 net/sched/cls_api.c:1394 cake_destroy+0x3f/0x80 net/sched/sch_cake.c:2695 qdisc_create.constprop.0+0x9da/0x10f0 net/sched/sch_api.c:1293 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1bb06badb9 Code: Unable to access opcode bytes at RIP 0x7f1bb06bad8f. RSP: 002b:00007fff3012a658 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1bb06badb9 RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000003 R11: 0000000000000246 R12: 00007fff3012a688 R13: 00007fff3012a6a0 R14: 00007fff3012a6e0 R15: 00000000000013c2 </TASK> Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20211210142046.698336-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22s390/kexec_file: fix error handling when applying relocationsPhilipp Rudo1-1/+6
[ Upstream commit 41967a37b8eedfee15b81406a9f3015be90d3980 ] arch_kexec_apply_relocations_add currently ignores all errors returned by arch_kexec_do_relocs. This means that every unknown relocation is silently skipped causing unpredictable behavior while the relocated code runs. Fix this by checking for errors and fail kexec_file_load if an unknown relocation type is encountered. The problem was found after gcc changed its behavior and used R_390_PLT32DBL relocations for brasl instruction and relied on ld to resolve the relocations in the final link in case direct calls are possible. As the purgatory code is only linked partially (option -r) ld didn't resolve the relocations leaving them for arch_kexec_do_relocs. But arch_kexec_do_relocs doesn't know how to handle R_390_PLT32DBL relocations so they were silently skipped. This ultimately caused an endless loop in the purgatory as the brasl instructions kept branching to itself. Fixes: 71406883fd35 ("s390/kexec_file: Add kexec_file_load system call") Reported-by: Tao Liu <ltao@redhat.com> Signed-off-by: Philipp Rudo <prudo@redhat.com> Link: https://lore.kernel.org/r/20211208130741.5821-3-prudo@redhat.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22selftests: net: Correct ping6 expected rc from 2 to 1Jie2x Zhou1-1/+1
[ Upstream commit 92816e2629808726af015c7f5b14adc8e4f8b147 ] ./fcnal-test.sh -v -t ipv6_ping TEST: ping out, VRF bind - ns-B IPv6 LLA [FAIL] TEST: ping out, VRF bind - multicast IP [FAIL] ping6 is failing as it should. COMMAND: ip netns exec ns-A /bin/ping6 -c1 -w1 fe80::7c4c:bcff:fe66:a63a%red strace of ping6 shows it is failing with '1', so change the expected rc from 2 to 1. Fixes: c0644e71df33 ("selftests: Add ipv6 ping tests to fcnal-test") Reported-by: kernel test robot <lkp@intel.com> Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com> Link: https://lore.kernel.org/r/20211209020230.37270-1-jie2x.zhou@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22Revert "drm/fb-helper: improve DRM fbdev emulation device names"Javier Martinez Canillas1-1/+7
[ Upstream commit 842470c4e211f284a224842849b1fa81b130c154 ] This reverts commit b3484d2b03e4c940a9598aa841a52d69729c582a. That change attempted to improve the DRM drivers fbdev emulation device names to avoid having confusing names like "simpledrmdrmfb" in /proc/fb. But unfortunately, there are user-space programs such as pm-utils that match against the fbdev names and so broke after the mentioned commit. Since the names in /proc/fb are used by tools that consider it an uAPI, let's restore the old names even when this lead to silly names like the one mentioned above. Fixes: b3484d2b03e4 ("drm/fb-helper: improve DRM fbdev emulation device names") Reported-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211020165740.3011927-1-javierm@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22vdpa: Consider device id larger than 31Parav Pandit1-1/+2
[ Upstream commit bb47620be322c5e9e372536cb6b54e17b3a00258 ] virtio device id value can be more than 31. Hence, use BIT_ULL in assignment. Fixes: 33b347503f01 ("vdpa: Define vdpa mgmt device, ops and a netlink interface") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Parav Pandit <parav@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211130042949.88958-1-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22virtio/vsock: fix the transport to work with VMADDR_CID_ANYWei Wang1-1/+2
[ Upstream commit 1db8f5fc2e5c66a5c51e1f6488e0ba7d45c29ae4 ] The VMADDR_CID_ANY flag used by a socket means that the socket isn't bound to any specific CID. For example, a host vsock server may want to be bound with VMADDR_CID_ANY, so that a guest vsock client can connect to the host server with CID=VMADDR_CID_HOST (i.e. 2), and meanwhile, a host vsock client can connect to the same local server with CID=VMADDR_CID_LOCAL (i.e. 1). The current implementation sets the destination socket's svm_cid to a fixed CID value after the first client's connection, which isn't an expected operation. For example, if the guest client first connects to the host server, the server's svm_cid gets set to VMADDR_CID_HOST, then other host clients won't be able to connect to the server anymore. Reproduce steps: 1. Run the host server: socat VSOCK-LISTEN:1234,fork - 2. Run a guest client to connect to the host server: socat - VSOCK-CONNECT:2:1234 3. Run a host client to connect to the host server: socat - VSOCK-CONNECT:1:1234 Without this patch, step 3. above fails to connect, and socat complains "socat[1720] E connect(5, AF=40 cid:1 port:1234, 16): Connection reset by peer". With this patch, the above works well. Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Signed-off-by: Wei Wang <wei.w.wang@intel.com> Link: https://lore.kernel.org/r/20211126011823.1760-1-wei.w.wang@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22virtio: always enter drivers/virtio/Arnd Bergmann1-2/+1
[ Upstream commit 27d9839f17940e8edc475df616bbd9cf7ede8d05 ] When neither VIRTIO_PCI_LIB nor VIRTIO are enabled, but the alibaba vdpa driver is, the kernel runs into a link error because the legacy virtio module never gets built: x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_set_features': eni_vdpa.c:(.text+0x23f): undefined reference to `vp_legacy_set_features' x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_set_vq_state': eni_vdpa.c:(.text+0x2fe): undefined reference to `vp_legacy_get_queue_enable' x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_set_vq_address': eni_vdpa.c:(.text+0x376): undefined reference to `vp_legacy_set_queue_address' x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_set_vq_ready': eni_vdpa.c:(.text+0x3b4): undefined reference to `vp_legacy_set_queue_address' x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_free_irq': eni_vdpa.c:(.text+0x460): undefined reference to `vp_legacy_queue_vector' x86_64-linux-ld: eni_vdpa.c:(.text+0x4b7): undefined reference to `vp_legacy_config_vector' x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_reset': When VIRTIO_PCI_LIB was added, it was correctly added to drivers/Makefile as well, but for the legacy module, this is missing. Solve this by always entering drivers/virtio during the build and letting its Makefile take care of the individual options, rather than having a separate line for each sub-option. Fixes: 64b9f64f80a6 ("vdpa: introduce virtio pci driver") Fixes: e85087beedca ("eni_vdpa: add vDPA driver for Alibaba ENI") Fixes: d89c8169bd70 ("virtio-pci: introduce legacy device module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211206085034.2836099-1-arnd@kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22iwlwifi: mvm: don't crash on invalid rate w/o STAJohannes Berg1-2/+3
[ Upstream commit d599f714b73e4177dfdfe64fce09175568288ee9 ] If we get to the WARN_ONCE(..., "Got a HT rate (...)", ...) here with a NULL sta, then we crash because mvmsta is bad and we try to dereference it. Fix that by printing -1 as the state if no station was given. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 6761a718263a ("iwlwifi: mvm: add explicit check for non-data frames in get Tx rate") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/iwlwifi.20211203140410.1a1541d7dcb5.I606c746e11447fe168cf046376b70b04e278c3b4@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22soc: imx: Register SoC device only on i.MX boardsStephan Gerhold1-0/+4
[ Upstream commit 4ebd29f91629e69da7d57390cdc953772eee03ab ] At the moment, using the ARM32 multi_v7_defconfig always results in two SoCs being exposed in sysfs. This is wrong, as far as I'm aware the Qualcomm DragonBoard 410c does not actually make use of a i.MX SoC. :) qcom-db410c:/sys/devices/soc0$ grep . * family:Freescale i.MX machine:Qualcomm Technologies, Inc. APQ 8016 SBC revision:0.0 serial_number:0000000000000000 soc_id:Unknown qcom-db410c:/sys/devices/soc1$ grep . * family:Snapdragon machine:APQ8016 ... This happens because imx_soc_device_init() registers the soc device unconditionally, even when running on devices that do not make use of i.MX. Arnd already reported this more than a year ago and even suggested a fix similar to this commit, but for some reason it was never submitted. Fix it by checking if the "__mxc_cpu_type" variable was actually initialized by earlier platform code. On devices without i.MX it will simply stay 0. Cc: Peng Fan <peng.fan@nxp.com> Fixes: d2199b34871b ("ARM: imx: use device_initcall for imx_soc_device_init") Reported-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/CAK8P3a0hxO1TmK6oOMQ70AHSWJnP_CAq57YMOutrxkSYNjFeuw@mail.gmail.com/ Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22clk: Don't parent clks until the parent is fully registeredMike Tipton1-3/+12
[ Upstream commit 54baf56eaa40aa5cdcd02b3c20d593e4e1211220 ] Before commit fc0c209c147f ("clk: Allow parents to be specified without string names") child clks couldn't find their parent until the parent clk was added to a list in __clk_core_init(). After that commit, child clks can reference their parent clks directly via a clk_hw pointer, or they can lookup that clk_hw pointer via DT if the parent clk is registered with an OF clk provider. The common clk framework treats hw->core being non-NULL as "the clk is registered" per the logic within clk_core_fill_parent_index(): parent = entry->hw->core; /* * We have a direct reference but it isn't registered yet? * Orphan it and let clk_reparent() update the orphan status * when the parent is registered. */ if (!parent) Therefore we need to be extra careful to not set hw->core until the clk is fully registered with the clk framework. Otherwise we can get into a situation where a child finds a parent clk and we move the child clk off the orphan list when the parent isn't actually registered, wrecking our enable accounting and breaking critical clks. Consider the following scenario: CPU0 CPU1 ---- ---- struct clk_hw clkBad; struct clk_hw clkA; clkA.init.parent_hws = { &clkBad }; clk_hw_register(&clkA) clk_hw_register(&clkBad) ... __clk_register() hw->core = core ... __clk_register() __clk_core_init() clk_prepare_lock() __clk_init_parent() clk_core_get_parent_by_index() clk_core_fill_parent_index() if (entry->hw) { parent = entry->hw->core; At this point, 'parent' points to clkBad even though clkBad hasn't been fully registered yet. Ouch! A similar problem can happen if a clk controller registers orphan clks that are referenced in the DT node of another clk controller. Let's fix all this by only setting the hw->core pointer underneath the clk prepare lock in __clk_core_init(). This way we know that clk_core_fill_parent_index() can't see hw->core be non-NULL until the clk is fully registered. Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20211109043438.4639-1-quic_mdtipton@quicinc.com [sboyd@kernel.org: Reword commit text, update comment] Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22arm64: dts: imx8mq: remove interconnect property from lcdifMartin Kepplinger1-2/+0
[ Upstream commit e5e6268f77badf18bd6ab435364cfe21c7396c31 ] The mxsfb driver handling imx8mq lcdif doesn't yet request the interconnect bandwidth that's needed at runtime when the description is present in the DT node. So remove that description and bring it back when it's supported. Fixes: ad1abc8a03fd ("arm64: dts: imx8mq: Add interconnect for lcdif") Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22ARM: socfpga: dts: fix qspi node compatibleDinh Nguyen7-8/+8
[ Upstream commit cb25b11943cbcc5a34531129952870420f8be858 ] The QSPI flash node needs to have the required "jedec,spi-nor" in the compatible string. Fixes: 1df99da8953 ("ARM: dts: socfpga: Enable QSPI in Arria10 devkit") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22ceph: initialize pathlen variable in reconnect_caps_cbXiubo Li1-2/+1
[ Upstream commit ee2a095d3b24f300a5e11944d208801e928f108c ] The smatch static checker warned about an uninitialized symbol usage in this function, in the case where ceph_mdsc_build_path returns an error. It turns out that that case is harmless, but it just looks sketchy. Initialize the variable at declaration time, and remove the unneeded setting of it later. Fixes: a33f6432b3a6 ("ceph: encode inodes' parent/d_name in cap reconnect message") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22ceph: fix duplicate increment of opened_inodes metricHu Weiwen1-8/+8
[ Upstream commit 973e5245637accc4002843f6b888495a6a7762bc ] opened_inodes is incremented twice when the same inode is opened twice with O_RDONLY and O_WRONLY respectively. To reproduce, run this python script, then check the metrics: import os for _ in range(10000): fd_r = os.open('a', os.O_RDONLY) fd_w = os.open('a', os.O_WRONLY) os.close(fd_r) os.close(fd_w) Fixes: 1dd8d4708136 ("ceph: metrics for opened files, pinned caps and opened inodes") Signed-off-by: Hu Weiwen <sehuww@mail.scut.edu.cn> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22tee: amdtee: fix an IS_ERR() vs NULL bugDan Carpenter1-3/+2
[ Upstream commit 9d7482771fac8d8e38e763263f2ca0ca12dd22c6 ] The __get_free_pages() function does not return error pointers it returns NULL so fix this condition to avoid a NULL dereference. Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22mac80211: track only QoS data frames for admission controlJohannes Berg1-3/+10
[ Upstream commit d5e568c3a4ec2ddd23e7dc5ad5b0c64e4f22981a ] For admission control, obviously all of that only works for QoS data frames, otherwise we cannot even access the QoS field in the header. Syzbot reported (see below) an uninitialized value here due to a status of a non-QoS nullfunc packet, which isn't even long enough to contain the QoS header. Fix this to only do anything for QoS data packets. Reported-by: syzbot+614e82b88a1a4973e534@syzkaller.appspotmail.com Fixes: 02219b3abca5 ("mac80211: add WMM admission control support") Link: https://lore.kernel.org/r/20211122124737.dad29e65902a.Ieb04587afacb27c14e0de93ec1bfbefb238cc2a0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22dmaengine: idxd: fix calling wq quiesce inside spinlockDave Jiang1-1/+1
[ Upstream commit fa51b16d05583c7aebbc06330afb50276243d198 ] Dan reports that smatch has found idxd_wq_quiesce() is being called inside the idxd->dev_lock. idxd_wq_quiesce() calls wait_for_completion() and therefore it can sleep. Move the call outside of the spinlock as it does not need device lock. Fixes: 5b0c68c473a1 ("dmaengine: idxd: support reporting of halt interrupt") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/163716858508.1721911.15051495873516709923.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22dmaengine: idxd: add halt interrupt supportDave Jiang2-0/+6
[ Upstream commit 88d97ea82cbe352851a8654ee952d3a694c8c2c6 ] Add halt interrupt support. Given that the misc interrupt handler already check halt state, the driver just need to run the halt handling code when receiving the halt interrupt. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/163114224352.846654.14334468363464318828.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22arm64: dts: rockchip: fix poweroff on helios64Florian Klink1-0/+1
[ Upstream commit aef4b9a89a376a9cabe5e744729914e7766c59bb ] Adding the rockchip,system-power-controller property here will use the rk808 to power off the system. Fixes: 09e006cfb43e ("arm64: dts: rockchip: Add basic support for Kobol's Helios64") Signed-off-by: Florian Klink <flokli@flokli.de> Tested-by: Dennis Gilmore <dgilmore@redhat.com> Link: https://lore.kernel.org/r/20211020095926.735938-2-flokli@flokli.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22arm64: dts: rockchip: fix audio-supply for Rock Pi 4Alex Bee1-1/+1
[ Upstream commit 8240e87f16d17a9592c9d67857a3dcdbcb98f10d ] As stated in the schematics [1] and [2] P5 the APIO5 domain is supplied by RK808-D Buck4, which in our case vcc1v8_codec - i.e. a 1.8 V regulator. Currently only white noise comes from the ES8316's output, which - for whatever reason - came up only after the the correct switch from i2s0_8ch_bus to i2s0_2ch_bus for i2s0's pinctrl was done. Fix this by setting the correct regulator for audio-supply. [1] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi4_v13_sch_20181112.pdf [2] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi_4c_v12_sch_20200620.pdf Fixes: 1b5715c602fd ("arm64: dts: rockchip: add ROCK Pi 4 DTS support") Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20211027143726.165809-1-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supplyJohn Keeping1-1/+1
[ Upstream commit 2b454a90e2ccdd6e03f88f930036da4df577be76 ] Correct a typo in the vin-supply property. The input supply is always-on, so this mistake doesn't affect whether the supply is actually enabled correctly. Fixes: fc702ed49a86 ("arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC") Signed-off-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20211102182908.3409670-3-john@metanate.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supplyJohn Keeping1-1/+1
[ Upstream commit 772fb46109f635dd75db20c86b7eaf48efa46cef ] Correct a typo in the vin-supply property. The input supply is always-on, so this mistake doesn't affect whether the supply is actually enabled correctly. Fixes: 4403e1237be3 ("arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc") Signed-off-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20211102182908.3409670-2-john@metanate.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edgeArtem Lapkin1-1/+0
[ Upstream commit 6dd0053683804427529ef3523f7872f473440a19 ] Remove mmc-hs400-enhanced-strobe from the rk3399-khadas-edge dts to improve compatibility with a wider range of eMMC chips. Before (BJTD4R 29.1 GiB): [ 7.001493] mmc2: CQHCI version 5.10 [ 7.027971] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA ....... [ 7.207086] mmc2: mmc_select_hs400es failed, error -110 [ 7.207129] mmc2: error -110 whilst initialising MMC card [ 7.308893] mmc2: mmc_select_hs400es failed, error -110 [ 7.308921] mmc2: error -110 whilst initialising MMC card [ 7.427524] mmc2: mmc_select_hs400es failed, error -110 [ 7.427546] mmc2: error -110 whilst initialising MMC card [ 7.590993] mmc2: mmc_select_hs400es failed, error -110 [ 7.591012] mmc2: error -110 whilst initialising MMC card After: [ 6.960785] mmc2: CQHCI version 5.10 [ 6.984672] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA [ 7.175021] mmc2: Command Queue Engine enabled [ 7.175053] mmc2: new HS400 MMC card at address 0001 [ 7.175808] mmcblk2: mmc2:0001 BJTD4R 29.1 GiB [ 7.176033] mmcblk2boot0: mmc2:0001 BJTD4R 4.00 MiB [ 7.176245] mmcblk2boot1: mmc2:0001 BJTD4R 4.00 MiB [ 7.176495] mmcblk2rpmb: mmc2:0001 BJTD4R 4.00 MiB, chardev (242:0) Fixes: c2aacceedc86 ("arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards") Signed-off-by: Artem Lapkin <art@khadas.com> Link: https://lore.kernel.org/r/20211115083321.2627461-1-art@khadas.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22pinctrl: amd: Fix wakeups when IRQ is shared with SCIMario Limonciello1-3/+26
commit 2d54067fcd23aae61e23508425ae5b29e973573d upstream. On some Lenovo AMD Gen2 platforms the IRQ for the SCI and pinctrl drivers are shared. Due to how the s2idle loop handling works, this case needs an extra explicit check whether the interrupt was caused by SCI or by the GPIO controller. To fix this rework the existing IRQ handler function to function as a checker and an IRQ handler depending on the calling arguments. BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1738 Reported-by: Joerie de Gram <j.de.gram@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Link: https://lore.kernel.org/r/20211101014853.6177-2-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22drm/i915/hdmi: Turn DP++ TMDS output buffers back on in encoder->shutdown()Ville Syrjälä4-2/+17
commit cecbc0c7eba7983965cac94f88d2db00b913253b upstream. Looks like our VBIOS/GOP generally fail to turn the DP dual mode adater TMDS output buffers back on after a reboot. This leads to a black screen after reboot if we turned the TMDS output buffers off prior to reboot. And if i915 decides to do a fastboot the black screen will persist even after i915 takes over. Apparently this has been a problem ever since commit b2ccb822d376 ("drm/i915: Enable/disable TMDS output buffers in DP++ adaptor as needed") if one rebooted while the display was turned off. And things became worse with commit fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot") since now we always turn the display off before a reboot. This was reported on a RKL, but I confirmed the same behaviour on my SNB as well. So looks pretty universal. Let's fix this by explicitly turning the TMDS output buffers back on in the encoder->shutdown() hook. Note that this gets called after irqs have been disabled, so the i2c communication with the DP dual mode adapter has to be performed via polling (which the gmbus code is perfectly happy to do for us). We also need a bit of care in handling DDI encoders which may or may not be set up for HDMI output. Specifically ddc_pin will not be populated for a DP only DDI encoder, in which case we don't want to call intel_gmbus_get_adapter(). We can handle that by simply doing the dual mode adapter type check before calling intel_gmbus_get_adapter(). Cc: <stable@vger.kernel.org> # v5.11+ Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4371 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211029191802.18448-2-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (cherry picked from commit 49c55f7b035b87371a6d3c53d9af9f92ddc962db) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22drm/i915/hdmi: convert intel_hdmi_to_dev to intel_hdmi_to_i915Jani Nikula1-9/+7
commit 7ceb751b615900086eed1d65955933923f127d99 upstream. Prefer i915 over drm pointer. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210921110244.8666-1-jani.nikula@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22scsi: ufs: core: Retry START_STOP on UNIT_ATTENTIONJaegeuk Kim1-3/+9
commit af21c3fd5b3ec540a97b367a70b26616ff7e0c55 upstream. Commit 57d104c153d3 ("ufs: add UFS power management support") made the UFS driver submit a REQUEST SENSE command before submitting a power management command to a WLUN to clear the POWER ON unit attention. Instead of submitting a REQUEST SENSE command before submitting a power management command, retry the power management command until it succeeds. This is the preparation to get rid of all UNIT ATTENTION code which should be handled by users. Link: https://lore.kernel.org/r/20211001182015.1347587-2-jaegeuk@kernel.org Cc: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22btrfs: remove stale comment about the btrfs_show_devnameAnand Jain1-7/+0
Commit cdccc03a8a369b59cff5e7ea3292511cfa551120 upstream. There were few lockdep warnings because btrfs_show_devname() was using device_list_mutex as recorded in the commits: 0ccd05285e7f ("btrfs: fix a possible umount deadlock") 779bf3fefa83 ("btrfs: fix lock dep warning, move scratch dev out of device_list_mutex and uuid_mutex") And finally, commit 88c14590cdd6 ("btrfs: use RCU in btrfs_show_devname for device list traversal") removed the device_list_mutex from btrfs_show_devname for performance reasons. This patch removes a stale comment about the function btrfs_show_devname and device_list_mutex. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-22 04:52:41 +0300