summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2008-10-08nfs: ERR_PTR is expected on failure from nfs_do_clone_mountDenis V. Lunev1-1/+1
Replace NULL with ERR_PTR(-EINVAL). Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-08fix fs/nfs/nfsroot.c compilationAdrian Bunk1-1/+1
This patch fixes the following compile error caused by commit f9247273cb69ba101877e946d2d83044409cc8c5 (UFS: add const to parser token tabl): <-- snip --> ... CC fs/nfs/nfsroot.o /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/nfs/nfsroot.c:130: error: tokens causes a section type conflict make[3]: *** [fs/nfs/nfsroot.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-08NFS: Allow concurrent inode revalidationTrond Myklebust2-46/+6
Currently, if two processes are both trying to revalidate metadata for the same inode, they will find themselves being serialised. There is no good justification for this now that we have improved our ability to detect stale attribute data, so we should remove that serialisation. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-08NFS: Fix up nfs_setattr_update_inode()Trond Myklebust1-1/+1
Ensure that it sets the inode metadata under the correct spinlock. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-08NFS: Don't clear nfsi->cache_validity in nfs_check_inode_attributes()Trond Myklebust1-7/+0
If we're merely checking the inode attributes because we suspect that the 'updated' attributes returned by the RPC call are stale, then we shouldn't be doing weak cache consistency updates or clearing the cache_validity flags. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-08NFS: Convert __nfs_revalidate_inode() to use nfs_refresh_inode()Trond Myklebust1-4/+1
In the case where there are parallel RPC calls to the same inode, we may receive stale metadata due to the lack of ordering, hence the sanity checking of metadata in nfs_refresh_inode(). Currently, __nfs_revalidate_inode() is calling nfs_update_inode() directly, without any further sanity checks, and hence may end up setting the inode up with stale metadata. Fix is to use nfs_refresh_inode() instead of nfs_update_inode(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-08NFS: Fix nfs_post_op_update_inode_force_wcc()Trond Myklebust1-8/+27
If we believe that the attributes are old (see nfs_refresh_inode()), then we shouldn't force an update. Also ensure that we hold the inode->i_lock across attribute checks and the call to nfs_refresh_inode_locked() to ensure that we don't race with other attribute updates. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-08NFS: Fix the NFS attribute updateTrond Myklebust1-3/+41
Currently nfs_refresh_inode() will only update the inode metadata if it sees that the RPC call that returned the nfs_fattr was started after the last update of the inode. This means that if we have parallel RPC calls to the same inode (when sending WRITE calls, for instance), we may often miss updates. This patch attempts to recover those missed updates by also accepting them if the ctime in the nfs_fattr is more recent than the inode's cached ctime. It also recovers the case where the file size has increased, but the ctime has not been updated due to limited ctime resolution. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-08NFS: Clean up nfs_refresh_inode() and nfs_post_op_update_inode()Trond Myklebust1-7/+14
Try to avoid taking and dropping the inode->i_lock more than once. Do so by moving the code in nfs_refresh_inode() that needs to be done under the spinlock into a function nfs_refresh_inode_locked(), and then having both nfs_refresh_inode() and nfs_post_op_update_inode() call it directly. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-08NFS: Add mount options for controlling the lookup cacheTrond Myklebust1-0/+43
Add the following NFS-specific mount options to the parser. -o lookupcache=all /* Default: cache positive & negative dentries */ -o lookupcache=pos[itive] /* Don't cache negative dentries */ -o lookupcache=none /* Strict revalidation of all dentries */ Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-08NFS: Don't apply NFS_MOUNT_FLAGMASK to text-based mountsTrond Myklebust2-3/+3
The point of introducing text-based mounts was to allow us to add functionality without having to worry about legacy binary mount formats. The mask should be there in order to ensure that binary formats don't start enabling features that they cannot support. There is no justification for applying it to the text mount path. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-08NFS: Add options for finer control of the lookup cacheTrond Myklebust2-0/+8
Add the flag NFS_MOUNT_LOOKUP_CACHE_NONEG to turn off the caching of negative dentries. In reality what we do is to force nfs_lookup_revalidate() to always discard negative dentries. Add the flag NFS_MOUNT_LOOKUP_CACHE_NONE for enforcing stricter revalidation of dentries. It forces the revalidate code to always do a lookup instead of just checking the cached mtime of the parent directory. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07NFS: Clean up nfs_sb_active/nfs_sb_deactiveTrond Myklebust5-22/+13
Instead of causing umount requests to block on server->active_wq while the asynchronous sillyrename deletes are executing, we can use the sb->s_active counter to obtain a reference to the super_block, and then release that reference in nfs_async_unlink_release(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07NFS: Fix nfs_file_llseek()Trond Myklebust1-4/+7
After the BKL removal patches were applied to the rest of the NFS code, the BKL protection in nfs_file_llseek() is no longer sufficient to ensure that inode->i_size is read safely in generic_file_llseek_unlocked(). In order to fix the situation, we either have to replace the naked read of inode->i_size in generic_file_llseek_unlocked() with i_size_read(), or the whole thing needs to be executed under the inode->i_lock; In order to avoid disrupting other filesystems, avoid touching generic_file_llseek_unlocked() for now... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07Linux 2.6.27-rc9Linus Torvalds1-1/+1
2008-10-07Marker depmod fix core kernel listMathieu Desnoyers1-2/+4
* Theodore Ts'o (tytso@mit.edu) wrote: > > I've been playing with adding some markers into ext4 to see if they > could be useful in solving some problems along with Systemtap. It > appears, though, that as of 2.6.27-rc8, markers defined in code which is > compiled directly into the kernel (i.e., not as modules) don't show up > in Module.markers: > > kvm_trace_entryexit arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u > kvm_trace_handler arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u > kvm_trace_entryexit arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u > kvm_trace_handler arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u > > (Note the lack of any of the kernel_sched_* markers, and the markers I > added for ext4_* and jbd2_* are missing as wel.) > > Systemtap apparently depends on in-kernel trace_mark being recorded in > Module.markers, and apparently it's been claimed that it used to be > there. Is this a bug in systemtap, or in how Module.markers is getting > built? And is there a file that contains the equivalent information > for markers located in non-modules code? I think the problem comes from "markers: fix duplicate modpost entry" (commit d35cb360c29956510b2fe1a953bd4968536f7216) Especially : - add_marker(mod, marker, fmt); + if (!mod->skip) + add_marker(mod, marker, fmt); } return; fail: Here is a fix that should take care if this problem. Thanks for the bug report! Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Tested-by: "Theodore Ts'o" <tytso@mit.edu> CC: Greg KH <greg@kroah.com> CC: David Smith <dsmith@redhat.com> CC: Roland McGrath <roland@redhat.com> CC: Sam Ravnborg <sam@ravnborg.org> CC: Wenji Huang <wenji.huang@oracle.com> CC: Takashi Nishiie <t-nishiie@np.css.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-07Merge branch 'for_linus' of ↵Linus Torvalds2-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: call touch_softlockup_watchdog on resume kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI
2008-10-07Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds1-9/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: gart iommu have direct mapping when agp is present too
2008-10-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds9-207/+93
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: workaround for bogus gcc warning in ide_sysfs_register_port() ide-cd: Optiarc DVD RW AD-7200A does play audio IDE: Fix platform device registration in Swarm IDE driver (v2) ide-dma: fix ide_build_dmatable() for TRM290 ide-cd: temporary tray close fix
2008-10-07Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds3-15/+21
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y [MIPS] Fix CMP Kconfig configuration and mark as broken.
2008-10-07Merge branch 'fixes' of ↵Linus Torvalds31-86/+130
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits) V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U V4L/DVB (9092): gspca: Bad init values for sonixj ov7660. V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors. V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561. V4L/DVB (9053): fix buffer overflow in uvc-video V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow V4L/DVB (9037): Fix support for Hauppauge Nova-S SE V4L/DVB (9029): Fix deadlock in demux code V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStick V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600 V4L/DVB (8963): s2255drv field count fix V4L/DVB (8961): zr36067: Fix RGBR pixel format V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.h V4L/DVB (8958): zr36067: Return proper bytes-per-line value V4L/DVB (8957): zr36067: Restore the default pixel format V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_open V4L/DVB (8935): em28xx-cards: Remove duplicate entry (EM2800_BOARD_KWORLD_USB2800) V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom. ...
2008-10-07atmel-mci: Initialize BLKR before sending data transfer commandHaavard Skinnemoen1-2/+4
The atmel-mci driver sometimes fails data transfers like this: mmcblk0: error -5 transferring data end_request: I/O error, dev mmcblk0, sector 2749769 end_request: I/O error, dev mmcblk0, sector 2749777 It turns out that this might be caused by the BLKR register (which contains the block size and the number of blocks being transfered) being initialized too late. This patch moves the initialization of BLKR so that it contains the correct value before the block transfer command is sent. This error is difficult to reproduce, but if you insert a long delay (mdelay(10) or thereabouts) between the calls to atmci_start_command() and atmci_submit_data(), all transfers seem to fail without this patch, while I haven't seen any failures with this patch. Reported-by: Hein_Tibosch <hein_tibosch@yahoo.es> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-06kgdb: call touch_softlockup_watchdog on resumeJason Wessel1-0/+3
The softlockup watchdog needs to be touched when resuming the from the kgdb stopped state to avoid the printk that a CPU is stuck if the debugger was active for longer than the softlockup threshold. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-10-06kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMIJan Kiszka1-6/+1
Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest, I came across spurious unhandled NMIs while running the singlestep test. Looking closer at the code path each NMI takes when KGDB is enabled, I noticed that kgdb_nmicallback is called twice per event: One time via DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first invocation cures the unhandled NMIs here. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-10-06x86 ACPI: Blacklist two HP machines with buggy BIOSesRafael J. Wysocki1-0/+16
There is a bug in the BIOSes of some HP boxes with AMD Turions which connects IO-APIC pins with ACPI thermal trip points in such a way that if the state of the IO-APIC is not as expected by the (buggy) BIOS, the thermal trip points are set to insanely low values (usually all of them become 16 degrees Celsius). As a result, thermal throttling kicks in and knock the system down to its shoes. Unfortunately some of the recent IO-APIC changes made the bug show up. To prevent this from happening, blacklist machines that are known to be affected (nx6115 and 6715b in this particular case). This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as a regression from 2.6.26. On my box it was caused by: commit 691874fa96d6349a8b60f8ea9c2bae52ece79941 Author: Maciej W. Rozycki <macro@linux-mips.org> Date: Tue May 27 21:19:51 2008 +0100 x86: I/O APIC: timer through 8259A second-chance Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> and the whole story is described in this (huge) thread: http://marc.info/?l=linux-kernel&m=121358440508410&w=4 Matthew Garrett told us about that happening on the nx6125: http://marc.info/?l=linux-kernel&m=121396307411930&w=4 and then Maciej analysed the breakage on the basis of a DSDT from the nx6325: http://marc.info/?l=linux-kernel&m=121401068718826&w=4 As far as the Dmitry's and Jason's boxes are concerned, I recognized the symptoms and asked them to verify that the blacklisting helped. It appears that the buggy BIOS code has been copy-pasted to the entire range of machines, for no good reason. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Jason Vas Dias <jason.vas.dias@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-06[MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=yRalf Baechle2-4/+5
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-06[MIPS] Fix CMP Kconfig configuration and mark as broken.Ralf Baechle1-11/+16
Because sync-r4k.c doesn't build. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-05ide: workaround for bogus gcc warning in ide_sysfs_register_port()Bartlomiej Zolnierkiewicz1-1/+1
Reported-by: "Steven Noonan" <steven@uplinklabs.net> Suggested-by: "Elias Oltmanns" <eo@nebensachen.de> Cc: mingo@elte.hu Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05ide-cd: Optiarc DVD RW AD-7200A does play audioBodo Eggert1-0/+1
The Optiarc DVD RW AD-7200A can play audio, but tells it could not. Signed-off-by: Bodo Eggert <7eggert@gmx.de> Tested-by: Nick Warne <nick@ukfsn.org> Received-from: Borislav Petkov <petkovbb@googlemail.com> [bart: keep "audio" quirks together] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05IDE: Fix platform device registration in Swarm IDE driver (v2)Ralf Baechle5-203/+83
The Swarm IDE driver uses a release method which is defined in the driver itself thus potentially oopsable. The simple fix would be to just leak the device but this patch goes the full length and moves the entire handling of the platform device in the platform code and retains only the platform driver code in drivers/ide/mips/swarm.c. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> [bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05ide-dma: fix ide_build_dmatable() for TRM290Sergei Shtylylov1-1/+1
Apparently, 'xcount' being 0 does not mean 0 bytes for TRM290; it means 4 bytes, judging from the code immediately preceding this check. So, we must never try to "split" the PRD for TRM290. This is probably never hit anyway -- with the DMA buffers aligned to at least 512 bytes and ATAPI DMA not being used for non block I/O commands... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05ide-cd: temporary tray close fixBorislav Petkov2-2/+7
This one fixes http://bugzilla.kernel.org/show_bug.cgi?id=11602. A more generic fix for drives which cannot autoclose tray will follow. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> [bart: add an extra parentheses for consistency with the rest of kernel code] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05x86: gart iommu have direct mapping when agp is present tooYinghai Lu1-9/+11
move init_memory_mapping() out of init_k8_gatt. for: http://bugzilla.kernel.org/show_bug.cgi?id=11676 2.6.27-rc2 to rc8, apgart fails, iommu=soft works, regression This is needed because we need to map the GART aperture even if the GATT is not initialized. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-05V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issueWiktor Grebla2-3/+3
Fixed audio clicking problem which could be heard when using analog tv or composite input Signed-off-by: Wiktor Grebla <greblus@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310UDarron Broad3-6/+31
Correct firmware type to MTS Correct audio routing for composite/s-video Add DVB-T detection. This patch uses the eeprom hash method for detection as the vendor/product ids are also used for the DIGIVOX_AD. This may be a clone of the same product. Explanatory text has been added prior to the hask look-up in anticipation that it may help others. The following has been tested to work: Analogue TV (PAL-I) Composite In DVB-T (UK Crystal Palace) USB AUDIO The following has not been tested but probably works: S-Video In Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (9092): gspca: Bad init values for sonixj ov7660.Jean-Francois Moine1-5/+13
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors.Jean-Francois Moine1-0/+1
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561.Shane1-1/+1
This makes auto gain functional on 04fc:0561. Signed-off-by: Shane <gnome42@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (9053): fix buffer overflow in uvc-videoRalph Loader1-1/+1
There is a buffer overflow in drivers/media/video/uvc/uvc_ctrl.c: INFO: 0xf2c5ce08-0xf2c5ce0b. First byte 0xa1 instead of 0xcc INFO: Allocated in uvc_query_v4l2_ctrl+0x3c/0x239 [uvcvideo] age=13 cpu=1 pid=4975 ... A fixed size 8-byte buffer is allocated, and a variable size field is read into it; there is no particular bound on the size of the field (it is dependent on hardware and configuration) and it can overflow [also verified by inserting printk's.] The patch attempts to size the buffer to the correctly. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflowPatrick Boettcher1-1/+1
The array size of 'shadow' still needs to be fixed in order to not overflow when reading register 0x00. Thanks to Oliver Endriss for pointing that out. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (9037): Fix support for Hauppauge Nova-S SEPatrick Boettcher3-6/+12
Different backends have different input busses (saa7146, flexcop). To reflect that a config-option to the s5h1420-driver was added which makes the output mode selectable. Furthermore the s5h1420-driver is now doing the same i2c-method as it was done before adding support for other i2c-users. This patch needs to go into the current release of the kernel, as this driver is currently broken. (Thanks to Eberhard Kaltenhaeuser for helping out to debug this issue.) Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (9029): Fix deadlock in demux codeAndreas Oberritter2-13/+19
The functions dvb_dmxdev_section_callback, dvb_dmxdev_ts_callback, dvb_dmx_swfilter_packet, dvb_dmx_swfilter_packets, dvb_dmx_swfilter and dvb_dmx_swfilter_204 may be called from both interrupt and process context. Therefore they need to be protected by spin_lock_irqsave() instead of spin_lock(). This fixes a deadlock discovered by lockdep. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStickMichael Krufky1-0/+2
2040:5510 is the same hardware as 2040:5500 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStickMichael Krufky1-1/+1
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600Devin Heitmueller2-1/+5
The AMD ATI TV Wonder 600 has an XC3028L and *not* an XC3028, so we need to load the proper firmware to prevent the device from overheating. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (8963): s2255drv field count fixDean Anderson1-1/+2
Fixes videobuf field_count Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (8961): zr36067: Fix RGBR pixel formatJean Delvare1-1/+1
The zr36067 driver is improperly declaring pixel format RGBP twice, once as "16-bit RGB LE" and once as "16-bit RGB BE". The latter is actually RGBR. Fix the code to properly map both pixel formats. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.hAndrew Morton1-0/+1
sparc32 allmodconfig: drivers/media/video/cafe_ccic.c: In function 'cafe_setup_siobuf': drivers/media/video/cafe_ccic.c:1192: error: implicit declaration of function 'PAGE_ALIGN' drivers/media/video/cafe_ccic.c: At top level: drivers/media/video/cafe_ccic.c:1430: error: variable 'cafe_v4l_vm_ops' has initializer but incomplete type drivers/media/video/cafe_ccic.c:1431: error: unknown field 'open' specified in initializer drivers/media/video/cafe_ccic.c:1431: warning: excess elements in struct initializer drivers/media/video/cafe_ccic.c:1431: warning: (near initialization for 'cafe_v4l_vm_ops') drivers/media/video/cafe_ccic.c:1432: error: unknown field 'close' specified in initializer drivers/media/video/cafe_ccic.c:1433: warning: excess elements in struct initializer drivers/media/video/cafe_ccic.c:1433: warning: (near initialization for 'cafe_v4l_vm_ops') drivers/media/video/cafe_ccic.c: In function 'cafe_v4l_mmap': drivers/media/video/cafe_ccic.c:1444: error: 'VM_WRITE' undeclared (first use in this function) drivers/media/video/cafe_ccic.c:1444: error: (Each undeclared identifier is reported only once drivers/media/video/cafe_ccic.c:1444: error: for each function it appears in.) drivers/media/video/cafe_ccic.c:1444: error: 'VM_SHARED' undeclared (first use in this function) drivers/media/video/cafe_ccic.c:1461: error: 'VM_DONTEXPAND' undeclared (first use in this function) This build breakage is caused by some header file shuffle in linux-next. But I suggest that this patch be merged ahead of linux-next to avoid bisection breakage. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (8958): zr36067: Return proper bytes-per-line valueJean Delvare1-8/+5
The zr36067 driver should return the actual bytes-per-line value when queried with ioctl VIDIOC_G_FMT, instead of 0. Otherwise user-space applications can get confused. Likewise, with ioctl VIDIOC_S_FMT, we are supposed to fill the bytes-per-line value. And we shouldn't fail if the caller sets the initial value to something different from 0. This is perfectly valid for applications to pre-fill this field with the value they expect. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-05V4L/DVB (8957): zr36067: Restore the default pixel formatJean Delvare1-1/+1
Restore the default pixel format to YUYV as it used to be before kernel 2.6.23. It was accidentally changed to BGR3 by commit 603d6f2c8f9f3604f9c6c1f8903efc2df30a000f. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 01:38:25 +0300