summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2005-05-23[MTD] Add reboot notifier to Intel NOR flash driverNicolas Pitre2-3/+47
to make sure the flash is in array mode whenever we're about to reboot. This is especially useful to allow "soft" reboot to work which consists of branching back into the bootloader. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Avoid compile warnings for Intel CFI flash without OTP support.Todd Poynor1-1/+3
Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] cfi_cmdset_0001: Skip delay if Instant Block Locking is setTodd Poynor1-4/+12
Skip jiffy delay after each block lock/unlock for Intel CFI flash with the "Instant Individual Block Locking" feature bit set. Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip: Scan the entire device for Media Headers. Dan Brown1-22/+28
Add a new module param, show_firmware_partition. Signed-off-by: Dan Brown <dan_brown@ieee.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Use arrays of needed size instead of constant-sized.Artem B. Bityuckiy1-5/+5
Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] sharpsl-flash: Correct error pathsRichard Purdie1-5/+10
Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Add support for more SharpSL machines and fix missing mapping initRichard Purdie1-6/+20
Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Prevent deadlock when flushing write bufferArtem B. Bityuckiy1-1/+3
Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Forbid to free inode_cache objects if its nlink isn't zero.Artem B. Bityuckiy2-4/+4
Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Improve garbage collector block selectionArtem B. Bityuckiy1-1/+7
Make sure the erase_pending_wbuf_list's blocks are taken into account when picking the block to GC. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] plat-ram: Make it usable on non ARM platformsThomas Gleixner1-2/+2
Use memset instead of ARM only memzero function Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] block2mtd: Fix incompatible pointer typeThomas Gleixner1-9/+8
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] cfi_cmdset_0001: Fix compiler warningsThomas Gleixner1-5/+5
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND nandsim: Use NAND_SKIP_BBT optionArtem B. Bityuckiy1-29/+12
Use the new NAND_SKIP_BBT option instead of defining a fake scan_bbt handler. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] ixp2000: Remove port setting codeLennert Buytenhek1-6/+1
Setting the slowport to 8-bit mode is something that ought to be done in the IXP2000 generic code, not in the MTD map driver. See the description for ARM patch 2493/1 for an explanation. http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=2493/1 Now that 2493/1 has been accepted and will be upstream soon, this doesn't need to be done in the map driver anymore. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Kernel Janitor fixes.Domen Puncer4-8/+8
Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Use function to manipulate superblock dirty flagArtem B. Bityuckiy1-2/+2
Use the corresponding function to mark Superblock dirty instead of doing it directly. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Fix typo in KconfigThomas Gleixner1-2/+2
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND s3c2410: Simplify command handlingBen Dooks1-106/+12
Updated with tglx's suggestion to simply the command invocation by simply changing the address of the IO write area Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] cfi_cmdset_0001: Fix state after syncNicolas Pitre1-1/+2
oldstate has to be reset to FL_READY after sync completion. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] cfi_cmdset_0001: Fix the buggy status check. Thomas Gleixner1-13/+3
The change makes the code endianess aware and replaces the bogus nested loop to or the status flags together. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Add the reverse operation of cfi_build_cmd()Thomas Gleixner1-1/+64
This is necessary to fix the broken status check in cfi_cmdset_0001 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] plat-ram: removed extraneous debugging codeBen Dooks1-10/+2
removed define of DEBUG removed extraneous debugging code Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Fixed unused loop variableBen Dooks1-2/+2
Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Fixed signed 1bit bitfieldBen Dooks1-3/+3
Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] phram: Allow short reads. Joern Engel1-8/+22
Jffs2 apparently needs this. Accept newline at the end of input. Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] block2mtd: Remove copyright. Fix offset calculationJoern Engel1-4/+3
- Remove Gareth from the Copyrights (at his own request) - Fix the "fscking embarrassment" Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Remove Elan-104NCDavid Vrabel3-241/+2
Remove support for the Arcom Elan-104NC since it's no longer being maintained. Signed-off-by: David Vrabel <dvrabel@arcom.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Add symlink caching support.Artem B. Bityuckiy5-70/+117
Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Use cond_resched instead of msleepThomas Gleixner1-2/+2
Replace msleep by cond_resched. On machines with HZ=100 (e.g. ARM) msleep slows down the operation by factor 10 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Fix NOR specific scan BUG Artem B. Bityuckiy3-10/+15
Fix fairly sad NOR-specific bug - during FS building ic->scan_dents isn't zero, but jffs2_mark_node_obsolete() migt be called it tries to finde the ic corresponding to ref - this requires ic->scan_dents = 0. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Prevent ino cache removal for inodes in useDavid Woodhouse5-16/+24
Don't remove inocache for inodes which are in read_inode() or clear_inode() until they're done. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Replace all the Au1x mapping drivers with a simplified single driverPete Popov7-867/+199
This driver does not have as many options but it's easier to maintain. And, it turns out AMD never shipped boards with different flash densities. Signed-off-by: Pete Popov <ppopov@pacbell.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Use after free, found by the Coverity toolJoern Engel1-3/+3
Signed-off-by: Alexander Nyberg <alexn@dsv.su.se> Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Check command timeoutThomas Gleixner1-11/+26
Check timeout while we wait for the command to finish. No worry about a false result. This prevents deadlocking when detecting an unknown number of chips and is useful for removable media too. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip: Wait for the command to finish.Thomas Gleixner1-2/+9
Do not use the ready function here, as it might hang for ever. The result will show, whether the chip is there or not Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Sparse fixesBen Dooks1-9/+11
Fix sparse errors due to lack of address-space markers Updated header comments Small re-format of initialiser Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Fix unregister_mtd_user() public function documentation.Artem B. Bityuckiy1-3/+3
Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Update BAST driver configurationBen Dooks1-4/+5
update the BAST driver config (which already supports the vr1000) to be selected only if the vr1000 has been configured Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Make OTP actually work.Nicolas Pitre1-3/+5
The OTP code is rather broken without this. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Fix node lookupArtem B. Bityuckiy1-3/+3
Look the ref->next_phys field instead of ->next_in_ino to determine if the block has more then one node. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Fix bad block table scan for small page devicesArtem B. Bityuckiy1-29/+30
Scan 1st and 2nd pages of SP devices for BB marker by default. Fix more then one page scanning in create_bbt.c. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Quiet unused variable warningNicolas Pitre1-2/+2
Signed-off-by: Nioclas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Early Manufacturer ID lookupKyungmin Park2-12/+11
Move manufacturer ID search to display correct ID in case of buswidth mismatch. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Add SST 39VF1601 (MPF+) IDBen Dooks1-1/+17
Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Fixup probing logic for single 16bit devicesBen Dooks1-1/+11
The change to the generic probe to look for the smallest width of chip first is causing some problems on boards with a single 16bit device. The problem seems to be the jedec_match() is truncating the device-id read from the table to match against the one read from the hardware, causing a match against the partial id of some chips with 16bit IDs (such as the SST39LF160) This fixes things for my own board, but something may need to be done if the same problem is exhibited for chips with an 8bit ID Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Read only OOB bytes during bad block scanArtem B. Bityuckiy1-14/+38
When scanning NAND for bad blocks, don't read the whole page, read only needed OOB bytes instead. Also check the return code of the nand_read_raw() function. Correctly free the this->bbt array in case of failure. Tested with Large page NAND. Fix debugging message. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Allow operation without bad block tableArtem B. Bityuckiy1-2/+3
Small bugfix. Sometimes it may be handy not to have bbt. So, this->bbt might be NULL. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Skip bad block table scan on requestThomas Gleixner2-3/+8
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Use a single config option for write buffer supportAndrew Victor9-70/+35
This patch replaces the current CONFIG_JFFS2_FS_NAND, CONFIG_JFFS2_FS_NOR_ECC and CONFIG_JFFS2_FS_DATAFLASH with a single configuration option - CONFIG_JFFS2_FS_WRITEBUFFER. The only functional change of this patch is that the slower div/mod calculations for SECTOR_ADDR(), PAGE_DIV() and PAGE_MOD() are now always used when CONFIG_JFFS2_FS_WRITEBUFFER is enabled. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-04 07:06:29 +0300