summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2007-10-11[CRYPTO] blkcipher: Added blkcipher_walk_virt_blockHerbert Xu2-10/+28
This patch adds the helper blkcipher_walk_virt_block which is similar to blkcipher_walk_virt but uses a supplied block size instead of the block size of the block cipher. This is useful for CTR where the block size is 1 but we still want to walk by the block size of the underlying cipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] blkcipher: Increase kmalloc amount to aligned block sizeHerbert Xu1-1/+1
Now that the block size is no longer a multiple of the alignment, we need to increase the kmalloc amount in blkcipher_next_slow to use the aligned block size. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] api: Explain the comparison on larval cra_nameHerbert Xu1-0/+5
This patch adds a comment to explain why we compare the cra_driver_name of the algorithm being registered against the cra_name of a larval as opposed to the cra_driver_name of the larval. In fact larvals have only one name, cra_name which is the name that was requested by the user. The test here is simply trying to find out whether the algorithm being registered can or can not satisfy the larval. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] blkcipher: Remove alignment restriction on block sizeHerbert Xu2-8/+8
Previously we assumed for convenience that the block size is a multiple of the algorithm's required alignment. With the pending addition of CTR this will no longer be the case as the block size will be 1 due to it being a stream cipher. However, the alignment requirement will be that of the underlying implementation which will most likely be greater than 1. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] authenc: Kill spaces in algorithm namesHerbert Xu1-2/+2
We do not allow spaces in algorithm names or parameters. Thanks to Joy Latten for pointing this out. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] cryptomgr: Fix parsing of recursive algorithmsHerbert Xu1-1/+2
As Joy Latten points out, inner algorithm parameters will miss the closing bracket which will also cause the outer algorithm to terminate prematurely. This patch fixes that also kills the WARN_ON if the number of parameters exceed the maximum as that is a user error. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] xts: XTS blockcipher mode implementation without partial blocksRik Snel7-0/+746
XTS currently considered to be the successor of the LRW mode by the IEEE1619 workgroup. LRW was discarded, because it was not secure if the encyption key itself is encrypted with LRW. XTS does not have this problem. The implementation is pretty straightforward, a new function was added to gf128mul to handle GF(128) elements in ble format. Four testvectors from the specification http://grouper.ieee.org/groups/1619/email/pdf00086.pdf were added, and they verify on my system. Signed-off-by: Rik Snel <rsnel@cube.dyndns.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] blkcipher: Use max() in blkcipher_get_spot() to state the intentionIngo Oeser1-1/+1
Use max in blkcipher_get_spot() instead of open coding it. Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] api: Kill crypto_km_typesHerbert Xu2-11/+8
When scatterwalk is built as a module digest.c was broken because it requires the crypto_km_types structure which is in scatterwalk. This patch removes the crypto_km_types structure by encoding the logic into crypto_kmap_type directly. In fact, this even saves a few bytes of code (not to mention the data structure itself) on i386 which is about the only place where it's needed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] aead: Add authencHerbert Xu5-4/+472
This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] api: Fixed crypto_*_reqsize return typeHerbert Xu1-2/+3
This patch changes the return type of crypto_*_reqsize from int to unsigned int which matches what the underlying type is (and should be). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] scatterwalk: Add scatterwalk_map_and_copyHerbert Xu2-0/+25
This patch adds the function scatterwalk_map_and_copy which reads or writes a chunk of data from a scatterlist at a given offset. It will be used by authenc which would read/write the authentication data at the end of the cipher/plain text. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] api: Move scatterwalk into algapiHerbert Xu1-2/+2
The scatterwalk code is only used by algorithms that can be built as a module. Therefore we can move it into algapi. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] ablkcipher: Remove queue pointer from common alg objectHerbert Xu4-18/+10
Since not everyone needs a queue pointer and those who need it can always get it from the context anyway the queue pointer in the common alg object is redundant. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] api: Add missing headers for setkey_unalignedHerbert Xu4-7/+12
This patch ensures that kernel.h and slab.h are included for the setkey_unaligned function. It also breaks a couple of long lines. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] api: Add support for multiple template parametersHerbert Xu3-27/+84
This patch adds support for having multiple parameters to a template, separated by a comma. It also adds support for integer parameters in addition to the current algorithm parameter type. This will be used by the authenc template which will have four parameters: the authentication algorithm, the encryption algorithm, the authentication size and the encryption key length. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] api: Add aead crypto typeHerbert Xu5-0/+312
This patch adds crypto_aead which is the interface for AEAD (Authenticated Encryption with Associated Data) algorithms. AEAD algorithms perform authentication and encryption in one step. Traditionally users (such as IPsec) would use two different crypto algorithms to perform these. With AEAD this comes down to one algorithm and one operation. Of course if traditional algorithms were used we'd still be doing two operations underneath. However, real AEAD algorithms may allow the underlying operations to be optimised as well. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] seed: New cipher algorithmHye-Shik Chang5-1/+591
This patch adds support for the SEED cipher (RFC4269). This patch have been used in few VPN appliance vendors in Korea for several years. And it was verified by KISA, who developed the algorithm itself. As its importance in Korean banking industry, it would be great if linux incorporates the support. Signed-off-by: Hye-Shik Chang <perky@FreeBSD.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] api: Add crypto_ablkcipher_ctx_alignedSebastian Siewior1-0/+5
This is function does the same thing for ablkcipher that is done for blkcipher by crypto_blkcipher_ctx_aligned(): it returns an aligned address of the private ctx. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] drivers/Kconfig: Remove "default m"sAdrian Bunk1-5/+0
Hardware drivers shouldn't default to m. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[CRYPTO] Kconfig: Remove "default m"sAdrian Bunk1-3/+0
Other options requiring specific block cipher algorithms already have the appropriate select's. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-11[SUNRPC]: Make the sunrpc use the seq_open_private()Pavel Emelyanov1-10/+2
Just switch to the consolidated code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[IRDA]: Make the IRDA use the seq_open_private()Pavel Emelyanov3-60/+8
Just switch to the consolidated code Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[DECNET]: Make decnet code use the seq_open_private()Pavel Emelyanov2-35/+4
Just switch to the consolidated code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[NETFILTER]: Make netfilter code use the seq_open_privatePavel Emelyanov6-109/+14
Just switch to the consolidated calls. ipt_recent() has to initialize the private, so use the __seq_open_private() helper. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[NET]: Make core networking code use seq_open_privatePavel Emelyanov15-335/+37
This concerns the ipv4 and ipv6 code mostly, but also the netlink and unix sockets. The netlink code is an example of how to use the __seq_open_private() call - it saves the net namespace on this private. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[FS] seq_file: Introduce the seq_open_private()Pavel Emelyanov2-0/+35
This function allocates the zeroed chunk of memory and call seq_open(). The __seq_open_private() helper returns the allocated memory to make it possible for the caller to initialize it. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11ibm_emac: Convert to use napi_struct independent of struct net_deviceRoland Dreier2-37/+20
Commit da3dedd9 ("[NET]: Make NAPI polling independent of struct net_device objects.") changed the interface to NAPI polling. Fix up the ibm_newemac driver so that it works with this new interface. This is actually a nice cleanup because ibm_newemac is one of the drivers that wants to have multiple NAPI structures for a single net_device. Compile-tested only as I don't have a system that uses the ibm_newemac driver. This conversion the conversion for the ibm_emac driver that was tested on real PowerPC 440SPe hardware. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11ibm_new_emac: Nuke SET_MODULE_OWNER() useRoland Dreier1-1/+0
Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11ibm_emac: Convert to use napi_struct independent of struct net_deviceRoland Dreier3-32/+28
Commit da3dedd9 ("[NET]: Make NAPI polling independent of struct net_device objects.") changed the interface to NAPI polling. Fix up the ibm_emac driver so that it works with this new interface. This is actually a nice cleanup because ibm_emac is one of the drivers that wants to have multiple NAPI structures for a single net_device. Tested with the internal MAC of a PowerPC 440SPe SoC with an AMCC 'Yucca' evaluation board. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11IPoIB: Fix unused variable warningRoland Dreier1-1/+0
The conversion to use netdevice internal stats left an unused variable in ipoib_neigh_free(), since there's no longer any reason to get netdev_priv() in order to increment dropped packets. Delete the unused priv variable. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11natsemi: Use NATSEMI_TIMER_FREQ consistentlyMark Brown1-2/+2
The natsemi driver has a define NATSEMI_TIMER_FREQ which looks like it controls the normal frequency of the chip poll timer but in fact only takes effect for the first run of the timer. Adjust the value of the define to match that used by the timer and use the define consistently. Signed-off-by: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11cxgb3 sparse warning fixesStephen Hemminger5-33/+31
Fix warnings from sparse related to shadowed variables and routines that should be declared static. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11chelsio: sparse warning fixes (old cxgb2)Stephen Hemminger4-370/+3
Fix problems detected by sparse: 1. whole chunk of MAC code was for defined and never used 2. hook for running ext intr in workqueue wasn't being used Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11ehea: use kernel event queueJan-Bernd Themann3-24/+10
eHEA recovery and DLPAR functions are called seldomly. The eHEA workqueues are replaced by the kernel event queue. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11network drivers: sparse warning fixesStephen Hemminger7-33/+32
Fix some of the easy warnings in network device drivers. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11s2io: sparse warnings fix (rev2)Stephen Hemminger1-47/+50
Fix warnings from sparse checker about shadowed definition and improperly formatted ethtool_strings. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11e1000e: restore flow control settings properlyAuke Kok3-3/+11
After a cable unplug the forced flow control settings were lost accidentally and the flow control settings fell back to the default EEPROM determined values. This breaks for people who want to run without fc enabled - after a cable reset the driver would refuse to run with fc disabled. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11e1000e: Simple optimizations in e1000_xmit_frameAuke Kok1-5/+4
After an e1000 patch from Krishna Kumar <krkumar2@in.ibm.com>. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11e1000: Simple optimizations in e1000_xmit_frameKrishna Kumar1-5/+4
Some simple optimizations in e1000_xmit_frame. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11[PATCH] mac80211: Defer setting of RX_FLAG_DECRYPTED.Mattias Nissler1-9/+11
The decryption handlers will skip the frame if the RX_FLAG_DECRYPTED flag is set, so the early flag setting introduced by Johannes breaks decryption. To work around this, call the handlers first and then set the flag. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] ieee80211_if_set_type: make check for master dev more explicitJohn W. Linville1-1/+1
Problem description by Daniel Drake <dsd@gentoo.org>: "This sequence of events causes loss of connectivity: <plug in> <associate as normal in managed mode> ifconfig eth7 down iwconfig eth7 mode monitor ifconfig eth7 up ifconfig eth7 down iwconfig eth7 mode managed <associate as normal> At this point you are associated but TX does not work. This is because the eth7 hard_start_xmit is still ieee80211_monitor_start_xmit." The problem is caused by ieee80211_if_set_type checking for a non-zero hard_start_xmit pointer value in order to avoid changing that value for master devices. The fix is to make that check more explicitly linked to master devices rather than simply checking if the value has been previously set. CC: Daniel Drake <dsd@gentoo.org> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: let get nick return what set nick has setHolger Schurig1-27/+7
Make the get-nickname wireless extension actually work. Before this patch, I could do "iwconfig eth1 nick BLAH" but "iwconfig eth1" would have still showed "MRVL-USB8388" to me. Hey, and that was wrong anyway, I'm on a CF card, not on USB :-) Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-By: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove one superfluous includeHolger Schurig1-1/+0
This makes scripts/checkincludes.pl happy. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: clean up scan debug messagesHolger Schurig2-68/+155
* make scan debug output cleaner * change some LBS_DEB_ASSOC messages to LBS_DEB_SCAN, which is more correct * move helper functions together * print function return value in the tracing code at one central location Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-By: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: fix "warning: Using plain integer as NULL pointer" sparse ↵Holger Schurig1-1/+1
warnings This fixes three "warning: Using plain integer as NULL pointer" sparse warnings. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: fix a debug statementHolger Schurig1-1/+1
Fix a debug statement Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas link error due to gcc `smartness'Geert Uytterhoeven1-2/+3
Some versions of gcc replace strstr() calls with a single-character `needle' parameter by strchr() behind our back. This causes a link error if strchr() is defined as an inline function in <asm/string.h> (e.g. on m68k): | drivers/built-in.o: In function `libertas_parse_chan': | linux/drivers/net/wireless/libertas/debugfs.c:209: undefined reference to `strchr' | drivers/built-in.o: In function `libertas_parse_ssid': | linux/drivers/net/wireless/libertas/debugfs.c:260: undefined reference to `strchr' Avoid this by explicitly calling strchr() instead. Also include <linux/string.h>, because this file calls lots of str*() routines. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-By: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-By: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: fix u8 constantHolger Schurig2-4/+4
Don't write constants that are (per documentation and struct) u8 as 0x0001, use 0x01 instead. Also remove an useless cast. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-By: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: problems setting wpa keysDan Williams1-5/+30
The 88w8385 chip, using SDIO interface and firmware release 5.0.11p0, has problems when both unicast and multicast WPA keys are set in one command. This patch ensures the keys are set independently. The original author of this patch is Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 01:04:01 +0300