summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-06-12x86/entry: Force rcu_irq_enter() when in idle taskThomas Gleixner1-7/+28
The idea of conditionally calling into rcu_irq_enter() only when RCU is not watching turned out to be not completely thought through. Paul noticed occasional premature end of grace periods in RCU torture testing. Bisection led to the commit which made the invocation of rcu_irq_enter() conditional on !rcu_is_watching(). It turned out that this conditional breaks RCU assumptions about the idle task when the scheduler tick happens to be a nested interrupt. Nested interrupts can happen when the first interrupt invokes softirq processing on return which enables interrupts. If that nested tick interrupt does not invoke rcu_irq_enter() then the RCU's irq-nesting checks will believe that this interrupt came directly from idle, which will cause RCU to report a quiescent state. Because this interrupt instead came from a softirq handler which might have been executing an RCU read-side critical section, this can cause the grace period to end prematurely. Change the condition from !rcu_is_watching() to is_idle_task(current) which enforces that interrupts in the idle task unconditionally invoke rcu_irq_enter() independent of the RCU state. This is also correct vs. user mode entries in NOHZ full scenarios because user mode entries bring RCU out of EQS and force the RCU irq nesting state accounting to nested. As only the first interrupt can enter from user mode a nested tick interrupt will enter from kernel mode and as the nesting state accounting is forced to nesting it will not do anything stupid even if rcu_irq_enter() has not been invoked. Fixes: 3eeec3858488 ("x86/entry: Provide idtentry_entry/exit_cond_rcu()") Reported-by: "Paul E. McKenney" <paulmck@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: "Paul E. McKenney" <paulmck@kernel.org> Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lkml.kernel.org/r/87wo4cxubv.fsf@nanos.tec.linutronix.de
2020-06-12x86/entry: Make NMI use IDTENTRY_RAWThomas Gleixner2-3/+3
For no reason other than beginning brainmelt, IDTENTRY_NMI was mapped to IDTENTRY_IST. This is not a problem on 64bit because the IST default entry point maps to IDTENTRY_RAW which does not any entry handling. The surplus function declaration for the noist C entry point is unused and as there is no ASM code emitted for NMI this went unnoticed. On 32bit IDTENTRY_IST maps to a regular IDTENTRY which does the normal entry handling. That is clearly the wrong thing to do for NMI. Map it to IDTENTRY_RAW to unbreak it. The IDTENTRY_NMI mapping needs to stay to avoid emitting ASM code. Fixes: 6271fef00b34 ("x86/entry: Convert NMI to IDTENTRY_NMI") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Debugged-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/CA+G9fYvF3cyrY+-iw_SZtpN-i2qA2BruHg4M=QYECU2-dNdsMw@mail.gmail.com
2020-06-12x86/entry: Treat BUG/WARN as NMI-like entriesAndy Lutomirski3-29/+52
BUG/WARN are cleverly optimized using UD2 to handle the BUG/WARN out of line in an exception fixup. But if BUG or WARN is issued in a funny RCU context, then the idtentry_enter...() path might helpfully WARN that the RCU context is invalid, which results in infinite recursion. Split the BUG/WARN handling into an nmi_enter()/nmi_exit() path in exc_invalid_op() to increase the chance to survive the experience. [ tglx: Make the declaration match the implementation ] Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/f8fe40e0088749734b4435b554f73eee53dcf7a8.1591932307.git.luto@kernel.org
2020-06-11x86/entry: Unbreak __irqentry_text_start/end magicThomas Gleixner9-25/+36
The entry rework moved interrupt entry code from the irqentry to the noinstr section which made the irqentry section empty. This breaks boundary checks which rely on the __irqentry_text_start/end markers to find out whether a function in a stack trace is interrupt/exception entry code. This affects the function graph tracer and filter_irq_stacks(). As the IDT entry points are all sequentialy emitted this is rather simple to unbreak by injecting __irqentry_text_start/end as global labels. To make this work correctly: - Remove the IRQENTRY_TEXT section from the x86 linker script - Define __irqentry so it breaks the build if it's used - Adjust the entry mirroring in PTI - Remove the redundant kprobes and unwinder bound checks Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2020-06-11x86/entry: __always_inline CR2 for noinstrPeter Zijlstra3-6/+6
vmlinux.o: warning: objtool: exc_page_fault()+0x9: call to read_cr2() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_page_fault()+0x24: call to prefetchw() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_page_fault()+0x21: call to kvm_handle_async_pf.isra.0() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_nmi()+0x1cc: call to write_cr2() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200603114052.243227806@infradead.org
2020-06-11lockdep: __always_inline more for noinstrPeter Zijlstra2-3/+3
vmlinux.o: warning: objtool: debug_locks_off()+0xd: call to __debug_locks_off() leaves .noinstr.text section vmlinux.o: warning: objtool: match_held_lock()+0x6a: call to look_up_lock_class.isra.0() leaves .noinstr.text section vmlinux.o: warning: objtool: lock_is_held_type()+0x90: call to lockdep_recursion_finish() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200603114052.185201076@infradead.org
2020-06-11x86/entry: Re-order #DB handler to avoid *SAN instrumentationPeter Zijlstra1-28/+27
vmlinux.o: warning: objtool: exc_debug()+0xbb: call to clear_ti_thread_flag.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: noist_exc_debug()+0x55: call to clear_ti_thread_flag.constprop.0() leaves .noinstr.text section Rework things so that handle_debug() looses the noinstr and move the clear_thread_flag() into that. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200603114052.127756554@infradead.org
2020-06-11x86/entry: __always_inline arch_atomic_* for noinstrPeter Zijlstra1-7/+7
vmlinux.o: warning: objtool: rcu_dynticks_eqs_exit()+0x33: call to arch_atomic_and.constprop.0() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200603114052.070166551@infradead.org
2020-06-11x86/entry: __always_inline irqflags for noinstrPeter Zijlstra1-10/+10
vmlinux.o: warning: objtool: lockdep_hardirqs_on()+0x65: call to arch_local_save_flags() leaves .noinstr.text section vmlinux.o: warning: objtool: lockdep_hardirqs_off()+0x5d: call to arch_local_save_flags() leaves .noinstr.text section vmlinux.o: warning: objtool: lock_is_held_type()+0x35: call to arch_local_irq_save() leaves .noinstr.text section vmlinux.o: warning: objtool: check_preemption_disabled()+0x31: call to arch_local_save_flags() leaves .noinstr.text section vmlinux.o: warning: objtool: check_preemption_disabled()+0x33: call to arch_irqs_disabled_flags() leaves .noinstr.text section vmlinux.o: warning: objtool: lock_is_held_type()+0x2f: call to native_irq_disable() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200603114052.012171668@infradead.org
2020-06-11x86/entry: __always_inline debugreg for noinstrPeter Zijlstra1-3/+3
vmlinux.o: warning: objtool: exc_debug()+0x21: call to native_get_debugreg() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200603114051.954401211@infradead.org
2020-06-11x86/idt: Consolidate idt functionalityThomas Gleixner3-52/+44
- Move load_current_idt() out of line and replace the hideous comment with a lockdep assert. This allows to make idt_table and idt_descr static. - Mark idt_table read only after the IDT initialization is complete. - Shuffle code around to consolidate the #ifdef sections into one. - Adapt the F00F bug code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200528145523.084915381@linutronix.de
2020-06-11x86/idt: Cleanup trap_init()Thomas Gleixner2-9/+18
No point in having all the IDT cruft in trap_init(). Move it into the IDT code and fixup the comments. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200528145522.992376498@linutronix.de
2020-06-11x86/idt: Use proper constants for table sizeThomas Gleixner1-1/+2
Use the actual struct size to calculate the IDT table size instead of hardcoded values. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200528145522.898591501@linutronix.de
2020-06-11x86/idt: Add comments about early #PF handlingThomas Gleixner1-2/+8
The difference between 32 and 64 bit vs. early #PF handling is not documented. Replace the FIXME at idt_setup_early_pf() with proper comments. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200528145522.807135882@linutronix.de
2020-06-11x86/idt: Mark init only functions __initThomas Gleixner1-2/+2
Since 8175cfbbbfcb ("x86/idt: Remove update_intr_gate()") set_intr_gate() and idt_setup_from_table() are only called from __init functions. Mark them as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200528145522.715816477@linutronix.de
2020-06-11x86/entry: Rename trace_hardirqs_off_prepare()Peter Zijlstra6-14/+14
The typical pattern for trace_hardirqs_off_prepare() is: ENTRY lockdep_hardirqs_off(); // because hardware ... do entry magic instrumentation_begin(); trace_hardirqs_off_prepare(); ... do actual work trace_hardirqs_on_prepare(); lockdep_hardirqs_on_prepare(); instrumentation_end(); ... do exit magic lockdep_hardirqs_on(); which shows that it's named wrong, rename it to trace_hardirqs_off_finish(), as it concludes the hardirq_off transition. Also, given that the above is the only correct order, make the traditional all-in-one trace_hardirqs_off() follow suit. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200529213321.415774872@infradead.org
2020-06-11x86/entry: Clarify irq_{enter,exit}_rcu()Peter Zijlstra2-9/+14
Because: irq_enter_rcu() includes lockdep_hardirq_enter() irq_exit_rcu() does *NOT* include lockdep_hardirq_exit() Which resulted in two 'stray' lockdep_hardirq_exit() calls in idtentry.h, and me spending a long time trying to find the matching enter calls. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200529213321.359433429@infradead.org
2020-06-11x86/entry: Remove DBn stacksPeter Zijlstra5-35/+5
Both #DB itself, as all other IST users (NMI, #MC) now clear DR7 on entry. Combined with not allowing breakpoints on entry/noinstr/NOKPROBE text and no single step (EFLAGS.TF) inside the #DB handler should guarantee no nested #DB. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200529213321.303027161@infradead.org
2020-06-11x86/entry: Remove debug IDT frobbingPeter Zijlstra5-108/+1
This is all unused now. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200529213321.245019500@infradead.org
2020-06-11x86/entry: Optimize local_db_save() for virtPeter Zijlstra3-6/+27
Because DRn access is 'difficult' with virt; but the DR7 read is cheaper than a cacheline miss on native, add a virt specific fast path to local_db_save(), such that when breakpoints are not in use to avoid touching DRn entirely. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200529213321.187833200@infradead.org
2020-06-11x86/entry, mce: Disallow #DB during #MCPeter Zijlstra1-0/+12
#MC is fragile as heck, don't tempt fate. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200529213321.131187767@infradead.org
2020-06-11x86/entry, nmi: Disable #DBPeter Zijlstra1-52/+3
Instead of playing stupid games with IST stacks, fully disallow #DB during NMIs. There is absolutely no reason to allow them, and killing this saves a heap of trouble. #DB is already forbidden on noinstr and CEA, so there can't be a #DB before this. Disabling it right after nmi_enter() ensures that the full NMI code is protected. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200529213321.069223695@infradead.org
2020-06-11x86/entry: Introduce local_db_{save,restore}()Peter Zijlstra2-16/+32
In order to allow other exceptions than #DB to disable breakpoints, provide common helpers. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200529213321.012060983@infradead.org
2020-06-11x86/hw_breakpoint: Prevent data breakpoints on user_pcid_flush_maskLai Jiangshan1-0/+11
The per-CPU user_pcid_flush_mask is used in the low level entry code. A data breakpoint can cause #DB recursion. Protect the full cpu_tlbstate structure for simplicity. Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200526014221.2119-5-laijs@linux.alibaba.com Link: https://lkml.kernel.org/r/20200529213320.955117574@infradead.org
2020-06-11x86/hw_breakpoint: Prevent data breakpoints on per_cpu cpu_tss_rwLai Jiangshan1-0/+9
cpu_tss_rw is not directly referenced by hardware, but cpu_tss_rw is accessed in CPU entry code, especially when #DB shifts its stacks. If a data breakpoint would be set on cpu_tss_rw.x86_tss.ist[IST_INDEX_DB], it would cause recursive #DB ending up in a double fault. Add it to the list of protected items. Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200526014221.2119-4-laijs@linux.alibaba.com Link: https://lkml.kernel.org/r/20200529213320.897976479@infradead.org
2020-06-11x86/hw_breakpoint: Prevent data breakpoints on direct GDTLai Jiangshan1-8/+22
A data breakpoint on the GDT can be fatal and must be avoided. The GDT in the CPU entry area is already protected, but not the direct GDT. Add the necessary protection. Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200526014221.2119-3-laijs@linux.alibaba.com Link: https://lkml.kernel.org/r/20200529213320.840953950@infradead.org
2020-06-11x86/hw_breakpoint: Add within_area() to check data breakpointsLai Jiangshan1-2/+11
Add a within_area() helper to checking whether the data breakpoints overlap with cpu_entry_area. It will be used to completely prevent data breakpoints on GDT, IDT, or TSS. Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200526014221.2119-2-laijs@linux.alibaba.com Link: https://lkml.kernel.org/r/20200529213320.784524504@infradead.org
2020-06-11xen: Move xen_setup_callback_vector() definition to include/xen/hvm.hVitaly Kuznetsov4-1/+5
Kbuild test robot reports the following problem on ARM: for 'xen_setup_callback_vector' [-Wmissing-prototypes] 1664 | void xen_setup_callback_vector(void) {} | ^~~~~~~~~~~~~~~~~~~~~~~~~ The problem is that xen_setup_callback_vector is a x86 only thing, its definition is present in arch/x86/xen/xen-ops.h but not on ARM. In events_base.c there is a stub for !CONFIG_XEN_PVHVM but it is not declared as 'static'. On x86 the situation is hardly better: drivers/xen/events/events_base.c doesn't include 'xen-ops.h' from arch/x86/xen/, it includes its namesake from include/xen/ which also results in a 'no previous prototype' warning. Currently, xen_setup_callback_vector() has two call sites: one in drivers/xen/events_base.c and another in arch/x86/xen/suspend_hvm.c. The former is placed under #ifdef CONFIG_X86 and the later is only compiled in when CONFIG_XEN_PVHVM. Resolve the issue by moving xen_setup_callback_vector() declaration to arch neutral 'include/xen/hvm.h' as the implementation lives in arch neutral drivers/xen/events/events_base.c. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lkml.kernel.org/r/20200520161600.361895-1-vkuznets@redhat.com
2020-06-11x86/entry: Remove the TRACE_IRQS cruftThomas Gleixner3-31/+1
No more users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202120.523289762@linutronix.de
2020-06-11x86/entry: Move paranoid irq tracing out of ASM codeThomas Gleixner4-13/+17
The last step to remove the irq tracing cruft from ASM. Ignore #DF as the maschine is going to die anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202120.414043330@linutronix.de
2020-06-11x86/entry/64: Remove TRACE_IRQS_*_DEBUGThomas Gleixner1-45/+3
Since INT3/#BP no longer runs on an IST, this workaround is no longer required. Tested by running lockdep+ftrace as described in the initial commit: 5963e317b1e9 ("ftrace/x86: Do not change stacks in DEBUG when calling lockdep") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202120.319418546@linutronix.de
2020-06-11x86/entry/32: Remove redundant irq disable codeThomas Gleixner1-76/+0
All exceptions/interrupts return with interrupts disabled now. No point in doing this in ASM again. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202120.221223450@linutronix.de
2020-06-11x86/entry: Make enter_from_user_mode() staticThomas Gleixner1-1/+1
The ASM users are gone. All callers are local. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202120.129232680@linutronix.de
2020-06-11x86/entry/64: Remove IRQ stack switching ASMThomas Gleixner1-96/+0
No more users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202120.021462159@linutronix.de
2020-06-11x86/entry: Remove the apic/BUILD interrupt leftoversThomas Gleixner5-196/+4
Remove all the code which was there to emit the system vector stubs. All users are gone. Move the now unused GET_CR2_INTO macro muck to head_64.S where the last user is. Fixup the eye hurting comment there while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202119.927433002@linutronix.de
2020-06-11x86/entry: Convert reschedule interrupt to IDTENTRY_SYSVEC_SIMPLEThomas Gleixner9-63/+7
The scheduler IPI does not need the full interrupt entry handling logic when the entry is from kernel mode. Use IDTENTRY_SYSVEC_SIMPLE and spare all the overhead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202119.835425642@linutronix.de
2020-06-11x86/entry: Convert XEN hypercall vector to IDTENTRY_SYSVECThomas Gleixner6-21/+18
Convert the last oldstyle defined vector to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes Fixup the related XEN code by providing the primary C entry point in x86 to avoid cluttering the generic code with X86'isms. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202119.741950104@linutronix.de
2020-06-11x86/entry: Convert various hypervisor vectors to IDTENTRY_SYSVECThomas Gleixner9-98/+27
Convert various hypervisor vectors to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20200521202119.647997594@linutronix.de
2020-06-11x86/entry: Convert KVM vectors to IDTENTRY_SYSVEC*Thomas Gleixner7-42/+15
Convert KVM specific system vectors to IDTENTRY_SYSVEC*: The two empty stub handlers which only increment the stats counter do no need to run on the interrupt stack. Use IDTENTRY_SYSVEC_SIMPLE for them. The wakeup handler does more work and runs on the interrupt stack. None of these handlers need to save and restore the irq_regs pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202119.555715519@linutronix.de
2020-06-11x86/entry: Convert various system vectorsThomas Gleixner14-102/+48
Convert various system vectors to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202119.464812973@linutronix.de
2020-06-11x86/entry: Convert SMP system vectors to IDTENTRY_SYSVECThomas Gleixner8-37/+21
Convert SMP system vectors to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202119.372234635@linutronix.de
2020-06-11x86/entry: Convert APIC interrupts to IDTENTRY_SYSVECThomas Gleixner9-44/+19
Convert APIC interrupts to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202119.280728850@linutronix.de
2020-06-11x86/entry: Provide IDTENTRY_SYSVECThomas Gleixner3-0/+91
Provide IDTENTRY variants for system vectors to consolidate the different mechanisms to emit the ASM stubs for 32- and 64-bit. On 64-bit this also moves the stack switching from ASM to C code. 32-bit will excute the system vectors w/o stack switching as before. The simple variant is meant for "empty" system vectors like scheduler IPI and KVM posted interrupt vectors. These do not need the full glory of irq enter/exit handling with softirq processing and more. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202119.185317067@linutronix.de
2020-06-11x86/entry: Use idtentry for interruptsThomas Gleixner9-100/+28
Replace the extra interrupt handling code and reuse the existing idtentry machinery. This moves the irq stack switching on 64-bit from ASM to C code; 32-bit already does the stack switching in C. This requires to remove HAVE_IRQ_EXIT_ON_IRQ_STACK as the stack switch is not longer in the low level entry code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202119.078690991@linutronix.de
2020-06-11x86/entry: Add IRQENTRY_IRQ macroThomas Gleixner3-0/+77
Provide a seperate IDTENTRY macro for device interrupts. Similar to IDTENTRY_ERRORCODE with the addition of invoking irq_enter/exit_rcu() and providing the errorcode as a 'u8' argument to the C function, which truncates the sign extended vector number. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202118.984573165@linutronix.de
2020-06-11x86/irq: Rework handle_irq() for 64-bitThomas Gleixner3-3/+12
To consolidate the interrupt entry/exit code vs. the other exceptions make handle_irq() an inline and handle both 64-bit and 32-bit mode. Preparatory change to move irq stack switching for 64-bit to C which allows to consolidate the entry exit handling by reusing the idtentry machinery both in ASM and C. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202118.889972748@linutronix.de
2020-06-11x86/irq: Convey vector as argument and not in ptregsThomas Gleixner11-78/+103
Device interrupts which go through do_IRQ() or the spurious interrupt handler have their separate entry code on 64 bit for no good reason. Both 32 and 64 bit transport the vector number through ORIG_[RE]AX in pt_regs. Further the vector number is forced to fit into an u8 and is complemented and offset by 0x80 so it's in the signed character range. Otherwise GAS would expand the pushq to a 5 byte instruction for any vector > 0x7F. Treat the vector number like an error code and hand it to the C function as argument. This allows to get rid of the extra entry code in a later step. Simplify the error code push magic by implementing the pushq imm8 via a '.byte 0x6a, vector' sequence so GAS is not able to screw it up. As the pushq imm8 is sign extending the resulting error code needs to be truncated to 8 bits in C code. Originally-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202118.796915981@linutronix.de
2020-06-11x86/irq: Use generic irq_regs implementationThomas Gleixner2-35/+0
The only difference is the name of the per-CPU variable: irq_regs vs. __irq_regs, but the accessor functions are identical. Remove the pointless copy and use the generic variant. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202118.704169051@linutronix.de
2020-06-11x86/entry/32: Remove common_exception()Thomas Gleixner1-21/+0
No more users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202118.611906966@linutronix.de
2020-06-11x86/entry/64: Remove error_exit()Thomas Gleixner1-9/+0
No more users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202118.516757524@linutronix.de
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 00:32:20 +0300