summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller141-605/+899
Three sets of overlapping changes. Nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03Linux 4.8Linus Torvalds1-1/+1
2016-10-03Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds3-5/+13
Pull ARM fixes from Russell King: "Three relatively small fixes for ARM: - Roger noticed that dma_max_pfn() was calculating the upper limit wrongly, by adding the PFN offset of memory twice. - A fix from Robin to correct parsing of MPIDR values when the address size is larger than one BE32 unit. - A fix from Srinivas to ensure that we do not rely on the boot loader (or previous Linux kernel) setting the translation table base register a certain way in the decompressor, which can lead to crashes" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 ARM: 8617/1: dma: fix dma_max_pfn() ARM: 8616/1: dt: Respect property size when parsing CPUs
2016-10-02ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7Srinivas Ramana1-1/+1
If the bootloader uses the long descriptor format and jumps to kernel decompressor code, TTBCR may not be in a right state. Before enabling the MMU, it is required to clear the TTBCR.PD0 field to use TTBR0 for translation table walks. The commit dbece45894d3a ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but doesn't consider all the bits for the size of TTBCR.N. Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to indicate the use of TTBR0 and the correct base address width. Fixes: dbece45894d3 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Srinivas Ramana <sramana@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-10-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds5-19/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "The last regression fixes for 4.8 final: - Two patches addressing the fallout of the CR4 optimizations which caused CR4-less machines to fail. - Fix the VDSO build on big endian machines - Take care of FPU initialization if no CPUID is available otherwise task struct size ends up being zero - Fix up context tracking in case load_gs_index fails" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Fix context tracking state warning when load_gs_index fails x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID x86/vdso: Fix building on big endian host x86/boot: Fix another __read_cr4() case on 486 x86/init: Fix cr4_init_shadow() on CR4-less machines
2016-10-02Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds12-55/+101
Pull MIPS fixes from Ralf Baechle: "Another round of fixes: - CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems - CPS: Avoid BUG() when offlining pre-r6 CPUs - DEC: Avoid gas warnings due to suspicious instruction scheduling by manually expanding assembler macros. - FTLB: Fix configuration by moving confiuguratoin after probing - FTLB: clear execution hazard after changing FTLB enable - Highmem: Fix detection of unsupported highmem with cache aliases - I6400: Don't touch FTLBP chicken bits - microMIPS: Fix BUILD_ROLLBACK_PROLOGUE - Malta: Fix IOCU disable switch read for MIPS64 - Octeon: Fix probing of devices attached to GPIO lines - uprobes: Misc small fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems MIPS: Fix detection of unsupported highmem with cache aliases MIPS: Malta: Fix IOCU disable switch read for MIPS64 MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS MIPS: clear execution hazard after changing FTLB enable MIPS: Configure FTLB after probing TLB sizes from config4 MIPS: Stop setting I6400 FTLBP MIPS: DEC: Avoid la pseudo-instruction in delay slots MIPS: Octeon: mark GPIO controller node not populated after IRQ init. MIPS: uprobes: fix use of uninitialised variable MIPS: uprobes: remove incorrect set_orig_insn MIPS: fix uretprobe implementation MIPS: smp-cps: Avoid BUG() when offlining pre-r6 CPUs
2016-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds8-29/+90
Pull sparc fixes from David Miller: 1) Fix section mismatches in some builds, from Paul Gortmaker. 2) Need to count huge zero page mappings when doing TSB sizing, from Mike Kravetz. 3) Fix handing of cpu_possible_mask when nr_cpus module option is specified, from Atish Patra. 4) Don't allocate irq stacks until nr_irqs has been processed, also from Atish Patra. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix non-SMP build. sparc64: Fix irq stack bootmem allocation. sparc64: Fix cpu_possible_mask if nr_cpus is set sparc64 mm: Fix more TSB sizing issues sparc64: fix section mismatch in find_numa_latencies_for_group
2016-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds26-127/+171
Pull networking fixes from David Miller: 1) Fix wrong TCP checksums on MTU probing when checksum offloading is disabled, from Douglas Caetano dos Santos. 2) Fix qdisc backlog updates in qfq and sfb schedulers, from Cong Wang. 3) Route lookup flow key protocol value is wrong in ip6gre_xmit_other(), fix from Lance Richardson. 4) Scheduling while atomic in multicast routing code of ipv4 and ipv6, fix from Nikolay Aleksandrov. 5) Fix packet alignment in fec driver, from Eric Nelson. 6) Fix perf regression in sctp due to struct layout and cache misses, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() act_ife: Fix false encoding act_ife: Fix external mac header on encode VSOCK: Don't dec ack backlog twice for rejected connections Revert "net: ethernet: bcmgenet: use phydev from struct net_device" net: fec: align IP header in hardware net: fec: remove QUIRK_HAS_RACC from i.mx27 net: fec: remove QUIRK_HAS_RACC from i.mx25 ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route ip6_gre: fix flowi6_proto value in ip6gre_xmit_other() tcp: fix a compile error in DBGUNDO() tcp: fix wrong checksum calculation on MTU probing sch_sfb: keep backlog updated with qlen sch_qfq: keep backlog updated with qlen can: dev: fix deadlock reported after bus-off
2016-10-02MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systemsPaul Burton1-0/+11
When discovering the number of VPEs per core, smp_num_siblings will be incorrect for kernels built without support for the MIPS MultiThreading (MT) ASE running on systems which implement said ASE. This leads to accesses to VPEs in secondary cores being performed incorrectly since mips_cm_vp_id calculates the wrong ID to write to the local "other" registers. Fix this by examining the number of VPEs in the core as reported by the CM. This patch presumes that the number of VPEs will be the same in each core of the system. As this path only applies to systems with CM version 2.5 or lower, and this property is true of all such known systems, this is likely to be fine but is described in a comment for good measure. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-01Merge tag 'scsi-fixes' of ↵Linus Torvalds4-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One final fix before 4.8. There was a memory leak triggered by turning scsi mq off due to the fact that we assume on host release that the already running hosts weren't mq based because that's the state of the global flag (even though they were). Fix it by tracking this on a per host host basis" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Avoid that toggling use_blk_mq triggers a memory leak
2016-10-01net: Use ns_capable_noaudit() when determining net sysctl permissionsTyler Hicks1-1/+1
The capability check should not be audited since it is only being used to determine the inode permissions. A failed check does not indicate a violation of security policy but, when an LSM is enabled, a denial audit message was being generated. The denial audit message caused confusion for some application authors because root-running Go applications always triggered the denial. To prevent this confusion, the capability check in net_ctl_permissions() is switched to the noaudit variant. BugLink: https://launchpad.net/bugs/1465724 Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by: James Morris <james.l.morris@oracle.com> [dtor: reapplied after e79c6a4fc923 ("net: make net namespace sysctls belong to container's owner") accidentally reverted the change.] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-01Merge branch 'for-linus' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "One small change to make joydev (which is used by older games) to bind to devices that export Z axis but not X or Y (such as TRC rudder)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: joydev - recognize devices with Z axis as joysticks
2016-10-01Merge branch 'akpm' (patches from Andrew)Linus Torvalds5-64/+74
Merge more fixes from Andrew Morton: "Three fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/property.h: fix typo/compile error ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()
2016-10-01include/linux/property.h: fix typo/compile errorJohn Youn1-1/+1
This fixes commit d76eebfa175e ("include/linux/property.h: fix build issues with gcc-4.4.4"). With that commit we get the following compile error when using the PROPERTY_ENTRY_INTEGER_ARRAY macro. include/linux/property.h:201:39: error: `u32_data' undeclared (first use in this function) PROPERTY_ENTRY_INTEGER_ARRAY(_name_, u32, _val_) ^ include/linux/property.h:193:17: note: in definition of macro `PROPERTY_ENTRY_INTEGER_ARRAY' { .pointer = { _type_##_data = _val_ } }, \ ^ This needs a '.' to reference the union member. It seems this was just overlooked here since it is done correctly in similar constructs in other parts of the original commit. This fix is in preparation of upcoming commits that will use this macro. Fixes: commit d76eebfa175e ("include/linux/property.h: fix build issues with gcc-4.4.4") Link: http://lkml.kernel.org/r/2de3b929290d88a723ed829a3e3cbd02044714df.1475114627.git.johnyoun@synopsys.com Signed-off-by: John Youn <johnyoun@synopsys.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-01ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock()Eric Ren1-0/+10
The testcase "mmaptruncate" of ocfs2-test deadlocks occasionally. In this testcase, we create a 2*CLUSTER_SIZE file and mmap() on it; there are 2 process repeatedly performing the following operations respectively: one is doing memset(mmaped_addr + 2*CLUSTER_SIZE - 1, 'a', 1), while the another is playing ftruncate(fd, 2*CLUSTER_SIZE) and then ftruncate(fd, CLUSTER_SIZE) again and again. This is the backtrace when the deadlock happens: __wait_on_bit_lock+0x50/0xa0 __lock_page+0xb7/0xc0 ocfs2_write_begin_nolock+0x163f/0x1790 [ocfs2] ocfs2_page_mkwrite+0x1c7/0x2a0 [ocfs2] do_page_mkwrite+0x66/0xc0 handle_mm_fault+0x685/0x1350 __do_page_fault+0x1d8/0x4d0 trace_do_page_fault+0x37/0xf0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 In ocfs2_write_begin_nolock(), we first grab the pages and then allocate disk space for this write; ocfs2_try_to_free_truncate_log() will be called if -ENOSPC is returned; if we're lucky to get enough clusters, which is usually the case, we start over again. But in ocfs2_free_write_ctxt() the target page isn't unlocked, so we will deadlock when trying to grab the target page again. Also, -ENOMEM might be returned in ocfs2_grab_pages_for_write(). Another deadlock will happen in __do_page_mkwrite() if ocfs2_page_mkwrite() returns non-VM_FAULT_LOCKED, and along with a locked target page. These two errors fail on the same path, so fix them by unlocking the target page manually before ocfs2_free_write_ctxt(). Jan Kara helps me clear out the JBD2 part, and suggest the hint for root cause. Changes since v1: 1. Also put ENOMEM error case into consideration. Link: http://lkml.kernel.org/r/1474173902-32075-1-git-send-email-zren@suse.com Signed-off-by: Eric Ren <zren@suse.com> Reviewed-by: He Gang <ghe@suse.com> Acked-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-01mm: workingset: fix crash in shadow node shrinker caused by ↵Johannes Weiner3-63/+63
replace_page_cache_page() Antonio reports the following crash when using fuse under memory pressure: kernel BUG at /build/linux-a2WvEb/linux-4.4.0/mm/workingset.c:346! invalid opcode: 0000 [#1] SMP Modules linked in: all of them CPU: 2 PID: 63 Comm: kswapd0 Not tainted 4.4.0-36-generic #55-Ubuntu Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013 task: ffff88040cae6040 ti: ffff880407488000 task.ti: ffff880407488000 RIP: shadow_lru_isolate+0x181/0x190 Call Trace: __list_lru_walk_one.isra.3+0x8f/0x130 list_lru_walk_one+0x23/0x30 scan_shadow_nodes+0x34/0x50 shrink_slab.part.40+0x1ed/0x3d0 shrink_zone+0x2ca/0x2e0 kswapd+0x51e/0x990 kthread+0xd8/0xf0 ret_from_fork+0x3f/0x70 which corresponds to the following sanity check in the shadow node tracking: BUG_ON(node->count & RADIX_TREE_COUNT_MASK); The workingset code tracks radix tree nodes that exclusively contain shadow entries of evicted pages in them, and this (somewhat obscure) line checks whether there are real pages left that would interfere with reclaim of the radix tree node under memory pressure. While discussing ways how fuse might sneak pages into the radix tree past the workingset code, Miklos pointed to replace_page_cache_page(), and indeed there is a problem there: it properly accounts for the old page being removed - __delete_from_page_cache() does that - but then does a raw raw radix_tree_insert(), not accounting for the replacement page. Eventually the page count bits in node->count underflow while leaving the node incorrectly linked to the shadow node LRU. To address this, make sure replace_page_cache_page() uses the tracked page insertion code, page_cache_tree_insert(). This fixes the page accounting and makes sure page-containing nodes are properly unlinked from the shadow node LRU again. Also, make the sanity checks a bit less obscure by using the helpers for checking the number of pages and shadows in a radix tree node. Fixes: 449dd6984d0e ("mm: keep page cache radix tree nodes in check") Link: http://lkml.kernel.org/r/20160919155822.29498-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Antonio SJ Musumeci <trapexit@spawn.link> Debugged-by: Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@vger.kernel.org> [3.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-30MAINTAINERS: Switch to kernel.org email address for Javi MerinoJavi Merino2-1/+2
Change my email address to my kernel.org account instead of the ARM one. Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-30x86/entry/64: Fix context tracking state warning when load_gs_index failsWanpeng Li1-2/+2
This warning: WARNING: CPU: 0 PID: 3331 at arch/x86/entry/common.c:45 enter_from_user_mode+0x32/0x50 CPU: 0 PID: 3331 Comm: ldt_gdt_64 Not tainted 4.8.0-rc7+ #13 Call Trace: dump_stack+0x99/0xd0 __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 enter_from_user_mode+0x32/0x50 error_entry+0x6d/0xc0 ? general_protection+0x12/0x30 ? native_load_gs_index+0xd/0x20 ? do_set_thread_area+0x19c/0x1f0 SyS_set_thread_area+0x24/0x30 do_int80_syscall_32+0x7c/0x220 entry_INT80_compat+0x38/0x50 ... can be reproduced by running the GS testcase of the ldt_gdt test unit in the x86 selftests. do_int80_syscall_32() will call enter_form_user_mode() to convert context tracking state from user state to kernel state. The load_gs_index() call can fail with user gsbase, gsbase will be fixed up and proceed if this happen. However, enter_from_user_mode() will be called again in the fixed up path though it is context tracking kernel state currently. This patch fixes it by just fixing up gsbase and telling lockdep that IRQs are off once load_gs_index() failed with user gsbase. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1475197266-3440-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-30x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUIDAndy Lutomirski1-12/+11
Otherwise arch_task_struct_size == 0 and we die. While we're at it, set X86_FEATURE_ALWAYS, too. Reported-by: David Saggiorato <david@saggiorato.net> Tested-by: David Saggiorato <david@saggiorato.net> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: aaeb5c01c5b ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86") Link: http://lkml.kernel.org/r/8de723afbf0811071185039f9088733188b606c9.1475103911.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-30x86/vdso: Fix building on big endian hostSegher Boessenkool1-1/+1
We need to call GET_LE to read hdr->e_type. Fixes: 57f90c3dfc75 ("x86/vdso: Error out if the vDSO isn't a valid DSO") Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-next@vger.kernel.org Link: http://lkml.kernel.org/r/20160929193442.GA16617@gate.crashing.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-30x86/boot: Fix another __read_cr4() case on 486Andy Lutomirski1-3/+1
The condition for reading CR4 was wrong: there are some CPUs with CPUID but not CR4. Rather than trying to make the condition exact, use __read_cr4_safe(). Fixes: 18bc7bd523e0 ("x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly") Reported-by: david@saggiorato.net Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Link: http://lkml.kernel.org/r/8c453a61c4f44ab6ff43c29780ba04835234d2e5.1475178369.git.luto@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-30mlx5: Add ndo_poll_controller() implementationCalvin Owens1-0/+20
This implements ndo_poll_controller in net_device_ops callbacks for mlx5, which is necessary to use netconsole with this driver. Acked-By: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Calvin Owens <calvinowens@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30nfp: bpf: zero extend 4 byte context loadsJakub Kicinski1-0/+2
Set upper 32 bits of destination register to zeros after load from the context structure. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lockXin Long2-21/+47
When sctp dumps all the ep->assocs, it needs to lock_sock first, but now it locks sock in rcu_read_lock, and lock_sock may sleep, which would break rcu_read_lock. This patch is to get and hold one sock when traversing the list. After that and get out of rcu_read_lock, lock and dump it. Then it will traverse the list again to get the next one until all sctp socks are dumped. For sctp_diag_dump_one, it fixes this issue by holding asoc and moving cb() out of rcu_read_lock in sctp_transport_lookup_process. Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30Merge branch 'sctp-fixes'David S. Miller4-34/+17
Xin Long says: ==================== sctp: a bunch of fixes for prsctp polices This patchset is to fix 2 issues for prsctp polices: 1. patch 1 and 2 fix "netperf-Throughput_Mbps -37.2% regression" issue when overloading the CPU. 2. patch 3 fix "prsctp polices should check both sides' prsctp_capable, instead of only local side". ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30sctp: change to check peer prsctp_capable when using prsctp policesXin Long2-6/+6
Now before using prsctp polices, sctp uses asoc->prsctp_enable to check if prsctp is enabled. However asoc->prsctp_enable is set only means local host support prsctp, sctp should not abandon packet if peer host doesn't enable prsctp. So this patch is to use asoc->peer.prsctp_capable to check if prsctp is enabled on both side, instead of asoc->prsctp_enable, as asoc's peer.prsctp_capable is set only when local and peer both enable prsctp. Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30sctp: remove prsctp_param from sctp_chunkXin Long4-26/+9
Now sctp uses chunk->prsctp_param to save the prsctp param for all the prsctp polices, we didn't need to introduce prsctp_param to sctp_chunk. We can just use chunk->sinfo.sinfo_timetolive for RTX and BUF polices, and reuse msg->expires_at for TTL policy, as the prsctp polices and old expires policy are mutual exclusive. This patch is to remove prsctp_param from sctp_chunk, and reuse msg's expires_at for TTL and chunk's sinfo.sinfo_timetolive for RTX and BUF polices. Note that sctp can't use chunk's sinfo.sinfo_timetolive for TTL policy, as it needs a u64 variables to save the expires_at time. This one also fixes the "netperf-Throughput_Mbps -37.2% regression" issue. Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30sctp: move sent_count to the memory hole in sctp_chunkXin Long1-3/+3
Now pahole sctp_chunk, it has 2 memory holes: struct sctp_chunk { struct list_head list; atomic_t refcnt; /* XXX 4 bytes hole, try to pack */ ... long unsigned int prsctp_param; int sent_count; /* XXX 4 bytes hole, try to pack */ This patch is to move up sent_count to fill the 1st one and eliminate the 2nd one. It's not just another struct compaction, it also fixes the "netperf- Throughput_Mbps -37.2% regression" issue when overloading the CPU. Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30mlx4: remove unused fieldsDavid Decotigny2-6/+0
This also can address following UBSAN warnings: [ 36.640343] ================================================================================ [ 36.648772] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx4/fw.c:857:26 [ 36.656853] shift exponent 64 is too large for 32-bit type 'int' [ 36.663348] ================================================================================ [ 36.671783] ================================================================================ [ 36.680213] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx4/fw.c:861:27 [ 36.688297] shift exponent 35 is too large for 32-bit type 'int' [ 36.694702] ================================================================================ Tested: reboot with UBSAN, no warning. Signed-off-by: David Decotigny <decot@googlers.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30ipv6 addrconf: implement RFC7559 router solicitation backoffMaciej Żenczykowski5-8/+49
This implements: https://tools.ietf.org/html/rfc7559 Backoff is performed according to RFC3315 section 14: https://tools.ietf.org/html/rfc3315#section-14 We allow setting /proc/sys/net/ipv6/conf/*/router_solicitations to a negative value meaning an unlimited number of retransmits, and we make this the new default (inline with the RFC). We also add a new setting: /proc/sys/net/ipv6/conf/*/router_solicitation_max_interval defaulting to 1 hour (per RFC recommendation). Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-by: Erik Kline <ek@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30Merge branch 'net_proc_perf'David S. Miller6-58/+129
Jia He says: ==================== Reduce cache miss for snmp_fold_field In a PowerPc server with large cpu number(160), besides commit a3a773726c9f ("net: Optimize snmp stat aggregation by walking all the percpu data at once"), I watched several other snmp_fold_field callsites which would cause high cache miss rate. test source code: ================ My simple test case, which read from the procfs items endlessly: /***********************************************************/ int main(int argc, char **argv) { int i; int fd = -1 ; int rdsize = 0; char buf[LINELEN+1]; buf[LINELEN] = 0; memset(buf,0,LINELEN); if(1 >= argc) { printf("file name empty\n"); return -1; } fd = open(argv[1], O_RDWR, 0644); if(0 > fd){ printf("open error\n"); return -2; } for(i=0;i<0xffffffff;i++) { while(0 < (rdsize = read(fd,buf,LINELEN))){ //nothing here } lseek(fd, 0, SEEK_SET); } close(fd); return 0; } /**********************************************************/ compile and run: ================ gcc test.c -o test perf stat -d -e cache-misses ./test /proc/net/snmp perf stat -d -e cache-misses ./test /proc/net/snmp6 perf stat -d -e cache-misses ./test /proc/net/sctp/snmp perf stat -d -e cache-misses ./test /proc/net/xfrm_stat before the patch set: ==================== Performance counter stats for 'system wide': 355911097 cache-misses [40.08%] 2356829300 L1-dcache-loads [60.04%] 355642645 L1-dcache-load-misses # 15.09% of all L1-dcache hits [60.02%] 346544541 LLC-loads [59.97%] 389763 LLC-load-misses # 0.11% of all LL-cache hits [40.02%] 6.245162638 seconds time elapsed After the patch set: =================== Performance counter stats for 'system wide': 194992476 cache-misses [40.03%] 6718051877 L1-dcache-loads [60.07%] 194871921 L1-dcache-load-misses # 2.90% of all L1-dcache hits [60.11%] 187632232 LLC-loads [60.04%] 464466 LLC-load-misses # 0.25% of all LL-cache hits [39.89%] 6.868422769 seconds time elapsed The cache-miss rate can be reduced from 15% to 2.9% changelog ========= v6: - correct v5 v5: - order local variables from longest to shortest line v4: - move memset into one block of if statement in snmp6_seq_show_item - remove the changes in netstat_seq_show considerred the stack usage is too large v3: - introduce generic interface (suggested by Marcelo Ricardo Leitner) - use max_t instead of self defined macro (suggested by David Miller) v2: - fix bug in udplite statistics. - snmp_seq_show is split into 2 parts ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: Suppress the "Comparison to NULL could be written" warningsJia He2-17/+17
This is to suppress the checkpatch.pl warning "Comparison to NULL could be written". No functional changes here. Signed-off-by: Jia He <hejianet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30ipv6: Remove useless parameter in __snmp6_fill_statsdevJia He1-6/+6
The parameter items(is always ICMP6_MIB_MAX) is useless for __snmp6_fill_statsdev Signed-off-by: Jia He <hejianet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30proc: Reduce cache miss in xfrm_statistics_seq_showJia He1-2/+8
This is to use the generic interfaces snmp_get_cpu_field{,64}_batch to aggregate the data by going through all the items of each cpu sequentially. Signed-off-by: Jia He <hejianet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30proc: Reduce cache miss in sctp_snmp_seq_showJia He1-2/+6
This is to use the generic interfaces snmp_get_cpu_field{,64}_batch to aggregate the data by going through all the items of each cpu sequentially. Signed-off-by: Jia He <hejianet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30proc: Reduce cache miss in snmp6_seq_showJia He1-8/+22
This is to use the generic interfaces snmp_get_cpu_field{,64}_batch to aggregate the data by going through all the items of each cpu sequentially. Signed-off-by: Jia He <hejianet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30proc: Reduce cache miss in snmp_seq_showJia He1-23/+47
This is to use the generic interfaces snmp_get_cpu_field{,64}_batch to aggregate the data by going through all the items of each cpu sequentially. Then snmp_seq_show is split into 2 parts to avoid build warning "the frame size" larger than 1024. Signed-off-by: Jia He <hejianet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net:snmp: Introduce generic interfaces for snmp_get_cpu_field{, 64}Jia He1-0/+23
This is to introduce the generic interfaces for snmp_get_cpu_field{,64}. It exchanges the two for-loops for collecting the percpu statistics data. This can aggregate the data by going through all the items of each cpu sequentially. Signed-off-by: Jia He <hejianet@gmail.com> Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30Merge tag 'rxrpc-rewrite-20160929' of ↵David S. Miller13-64/+68
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Fixes and adjustments This set of patches contains some fixes and adjustments: (1) Connections for exclusive calls are being reused because the check to work out whether to set RXRPC_CONN_DONT_REUSE is checking where the parameters will be copied to (but haven't yet). (2) Make Tx loss-injection go through the normal return, so the state gets set correctly for what the code thinks it has done. Note lost Tx packets in the tx_data trace rather than the skb tracepoint. (3) Activate channels according to the current state from within the channel_lock to avoid someone changing it on us. (4) Reduce the local endpoint's services list to a single pointer as we don't allow service AF_RXRPC sockets to share UDP ports with other AF_RXRPC sockets, so there can't be more than one element in the list. (5) Request more ACKs in slow-start mode to help monitor the state driving the window configuration. (6) Display the serial number of the packet being ACK'd rather than the ACK packet's own serial number in the congestion trace as this can be related to other entries in the trace. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30Merge tag 'wireless-drivers-next-for-davem-2016-09-29' of ↵David S. Miller122-1437/+2383
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: wireless-drivers-next patches for 4.9 Major changes: iwlwifi * work for new hardware support continues * dynamic queue allocation stabilization * improvements in the MSIx code * multiqueue support work continues * new firmware version support (API 26) * add 8275 series support * add 9560 series support * add support for MU-MIMO sniffer * add support for RRM by scan * add support for "reverse" rx packet injection faking hw descriptors * migrate to devm memory allocation handling * Remove support for older firmwares (API older than -17 and -22) wl12xx * support booting the same rootfs with both wl12xx and wl18xx hostap * mark the driver as obsolete ath9k * disable RNG by default ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30tg3: Avoid NULL pointer dereference in tg3_io_error_detected()Milton Miller1-5/+5
While the driver is probing the adapter, an error may occur before the netdev structure is allocated and attached to pci_dev. In this case, not only netdev isn't available, but the tg3 private structure is also not available as it is just math from the NULL pointer, so dereferences must be skipped. The following trace is seen when the error is triggered: [1.402247] Unable to handle kernel paging request for data at address 0x00001a99 [1.402410] Faulting instruction address: 0xc0000000007e33f8 [1.402450] Oops: Kernel access of bad area, sig: 11 [#1] [1.402481] SMP NR_CPUS=2048 NUMA PowerNV [1.402513] Modules linked in: [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000 [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0 [1.402787] REGS: c000001fe4e8b790 TRAP: 0300 Not tainted (4.4.0-36-generic) [1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28000422 XER: 20000000 [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1 GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000 GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299 GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006 GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768 GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002 GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000 [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340 [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340 This patch avoids the NULL pointer dereference by moving the access after the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan]. Fixes: 0486a063b1ff ("tg3: prevent ifup/ifdown during PCI error recovery") Fixes: dfc8f370316b ("net/tg3: Release IRQs on permanent error") Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30Merge branch 'dsa-global-cosmetics'David S. Miller6-443/+607
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: Global (1) cosmetics The Global (1) internal SMI device of Marvell switches is a set of registers providing support to different units for MAC addresses (ATU), VLANs (VTU), PHY polling (PPU), etc. Chips (like 88E6060) may use a different address for it, or have subtleties in the units (e.g. different number of databases, changing how registers must be accessed), making it hard to maintain properly. This patchset is a first step to polish the Global (1) support, with no functional changes though. Here's basically what it does: - add helpers to access Global1 registers (same for Global2) - remove a few family checks (VTU/STU FID registers) - s/mv88e6xxx_vtu_stu_entry/mv88e6xxx_vtu_entry/ - add a per-chip mv88e6xxx_ops structure of function pointers: struct mv88e6xxx_ops { int (*get_eeprom)(struct mv88e6xxx_chip *chip, struct ethtool_eeprom *eeprom, u8 *data); int (*set_eeprom)(struct mv88e6xxx_chip *chip, struct ethtool_eeprom *eeprom, u8 *data); int (*set_switch_mac)(struct mv88e6xxx_chip *chip, u8 *addr); int (*phy_read)(struct mv88e6xxx_chip *chip, int addr, int reg, u16 *val); int (*phy_write)(struct mv88e6xxx_chip *chip, int addr, int reg, u16 val); }; Future patchsets will add ATU/VTU ops, software reset, etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add eeprom opsVivien Didelot2-24/+26
Remove EEPROM flags in favor of new {get,set}_eeprom chip-wide functions in the mv88e6xxx_ops structure. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add set_switch_mac to opsVivien Didelot2-13/+23
Add a set_switch_mac chip-wide function to mv88e6xxx_ops and remove MV88E6XXX_FLAG_G2_SWITCH_MAC flags. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add chip-wide opsVivien Didelot2-43/+121
Introduce a mv88e6xxx_ops structure to describe supported chip-wide functions and assign the correct variant to the chip models. For the moment, add only PHY access routines. This allows to get rid of the PHY ops structures and the usage of PHY flags. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: rename mv88e6xxx_opsVivien Didelot2-9/+9
The mv88e6xxx_ops is used to describe how to access the chip registers. It can be through SMI (via an MDIO bus), or via another interface such as crafted remote management frames. The correct BUS operations structure is chosen at runtime, depending on the chip address and connectivity. We will need the mv88e6xxx_ops name for future chip-wide operation structure, thus rename mv88e6xxx_ops to more explicit mv88e6xxx_bus_ops. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: rename mv88e6xxx_vtu_stu_entryVivien Didelot2-27/+24
The STU (if the switch has one) is abstracted and accessed through the VTU operations and data registers. Thus rename the mv88e6xxx_vtu_stu_entry struct to mv88e6xxx_vtu_entry. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add mv88e6xxx_num_ports helperVivien Didelot3-19/+24
Add an mv88e6xxx_num_ports helper instead of digging in the chip info structure. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: expose mv88e6xxx_num_databasesVivien Didelot2-5/+5
The mv88e6xxx_num_databases will be used by shared code, so move it inline to the header file. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add flags for FID registersVivien Didelot2-17/+23
Add flags to describe the presence of Global 1 ATU FID register (0x01) and VTU FID register (0x02), instead of checking families. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-24 00:07:58 +0300