summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-06-24lkdtm/heap: Add vmalloc linear overflow testKees Cook4-4/+27
Similar to the existing slab overflow and stack exhaustion tests, add VMALLOC_LINEAR_OVERFLOW (and rename the slab test SLAB_LINEAR_OVERFLOW). Additionally unmarks the test as destructive. (It should be safe in the face of misbehavior.) Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210623203936.3151093-6-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITEKees Cook1-0/+3
When built under CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, this test is expected to fail (i.e. not trip an exception). Fixes: 46d1a0f03d66 ("selftests/lkdtm: Add tests for LKDTM targets") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210623203936.3151093-5-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24selftests/lkdtm: Fix expected text for free poisonKees Cook1-2/+2
Freed memory poisoning can be tested a few ways, so update the expected text to reflect the non-Oopsing alternative. Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210623203936.3151093-4-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24selftests/lkdtm: Fix expected text for CR4 pinningKees Cook1-1/+1
The error text for CR4 pinning changed. Update the test to match. Fixes: a13b9d0b9721 ("x86/cpu: Use pinning mask for CR4 bits needing to be 0") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210623203936.3151093-3-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24selftests/lkdtm: Avoid needing explicit sub-shellKees Cook1-4/+8
Some environments do not set $SHELL when running tests. There's no need to use $SHELL here anyway, since "cat" can be used to receive any delivered signals from the kernel. Additionally avoid using bash-isms in the command, and record stderr for posterity. Fixes: 46d1a0f03d66 ("selftests/lkdtm: Add tests for LKDTM targets") Cc: stable@vger.kernel.org Suggested-by: Guillaume Tucker <guillaume.tucker@collabora.com> Suggested-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210623203936.3151093-2-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23Merge tag 'extcon-next-for-5.14' of ↵Greg Kroah-Hartman7-69/+310
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon next for v5.14 Detailed description for this pull request: 1. Update extcon-sm5502 provider driver - Convert devicetree binding document sytle with yaml for extcon-sm5502.c and add support for SM5504 chip to extcon-sm5502.c. - Use devm_regmap_add_irq_chip and probe_new for extcon-sm5502.c 2. Add missing modalias string for extcon-max8997.c. 3. Initialize the status data of extcon-intel-mrfld.c on probe time in order to prevent the mismatch issue. * tag 'extcon-next-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: extcon: sm5502: Add support for SM5504 extcon: sm5502: Refactor driver to use chip-specific struct dt-bindings: extcon: sm5502: Document siliconmitus,sm5504-muic dt-bindings: extcon: sm5502: Convert to DT schema extcon: sm5502: Implement i2c_driver->probe_new() extcon: sm5502: Use devm_regmap_add_irq_chip() extcon: max8997: Add missing modalias string extcon: sm5502: Drop invalid register write in sm5502_reg_data extcon: intel-mrfld: Sync hardware and software state on init
2021-06-23Merge tag 'phy-for-5.14_v2' of ↵Greg Kroah-Hartman36-136/+1601
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.14 version 2 - Updates: - Yaml conversion for renesas,rcar-gen3 pcie phy and rockchip-usb-phy bindings - Support for devm_phy_get() taking NULL phy name - New support: - PCIe phy for Qualcomm IPQ60xx - PCIe phy for Qualcomm SDX55 - USB phy for RK3308 - CAN transceivers phy for TI TCAN104x - Innosilicon-based CSI dphy for rockchip * tag 'phy-for-5.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (36 commits) phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'" phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe() phy: uniphier-pcie: Fix updating phy parameters phy/rockchip: add Innosilicon-based CSI dphy dt-bindings: phy: add yaml binding for rockchip-inno-csi-dphy phy: rockchip: remove redundant initialization of pointer cfg phy: phy-can-transceiver: Add support for generic CAN transceiver driver dt-bindings: phy: Add binding for TI TCAN104x CAN transceivers phy: core: Reword the comment specifying the units of max_link_rate to be Mbps phy: phy-mtk-hdmi: Remove redundant dev_err call in mtk_hdmi_phy_probe() phy: phy-mtk-mipi-dsi: Remove redundant dev_err call in mtk_mipi_tx_probe() phy: phy-mmp3-hsic: Remove redundant dev_err call in mmp3_hsic_phy_probe() phy: bcm-ns-usb3: Remove redundant dev_err call in bcm_ns_usb3_mdio_probe() MAINTAINERS: update marvell,armada-3700-utmi-phy.yaml reference phy: phy-twl4030-usb: use DEVICE_ATTR_RO macro dt-bindings: phy: convert rockchip-usb-phy.txt to YAML phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy dt-bindings: phy: rockchip-inno-usb2: add compatible for rk3308 USB phy phy: stm32: manage optional vbus regulator on phy_power_on/off dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc ...
2021-06-23phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'"Vinod Koul1-2/+2
This reverts commit 6eded551cefe ("phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'") as we don't want drivers to be built in and should be a module instead Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-22Merge tag 'icc-5.14-rc1' of ↵Greg Kroah-Hartman6-0/+2280
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.14 Here are changes for the 5.14-rc1 merge window consisting of interconnect driver updates. Driver changes: - New driver for SC7280 platforms. Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: Add SC7280 interconnect provider driver dt-bindings: interconnect: Add Qualcomm SC7280 DT bindings
2021-06-22mei: revamp mei extension header structure layout.Tomas Winkler3-27/+38
The mei extension header was build as array of flexible structures which will not work if actually more headers are added. (Currently only vtag header was used). Sparse reports: drivers/misc/mei/hw.h:253:32: warning: array of flexible structures Use basic type u8 for the variable sized extension. Define explicitly mei_ext_hdr_vtag structure. And also fix mei_ext_next() function to point correctly to the end of the header. Note: the headers are part of firmware interface and need to be __packed. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210621193756.134027-2-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-22mei: fix kdoc in the driverTamar Mashiah8-12/+12
Over time the functions were renamed, but this was not always reflected in kdoc, fix that. Signed-off-by: Tamar Mashiah <tamar.mashiah@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210621193756.134027-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-22Merge tag 'misc-habanalabs-next-2021-06-22' of ↵Greg Kroah-Hartman30-878/+3209
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next Oded writes: This tag contains habanalabs driver changes for v5.14: - Change communication protocol with f/w. The new protocl allows better backward compatibility between different f/w versions and is more stable. - Send hard-reset cause to f/w after a hard-reset has happened. - Move to indirection when generating interrupts to f/w. - Better progress and error messages during the f/w load stage. - Recognize that f/w is with enabled security according to device ID. - Add validity check to event queue mechanism. - Add new event from f/w that will indicate a daemon has been terminated inside the f/w. - Move to TLB cache range invalidation in the device's MMU. - Disable memory scrubbing by default for performance. - Many fixes for sparse/smatch reported errors. - Enable by default stop-on-err in the ASIC. - Move to ASYNC device probing to speedup loading of driver in server with multiple devices. - Fix to stop using disabled NIC ports when doing collective operation. - Use standard error codes instead of positive values. - Add support for resetting device after user has finished using it. - Add debugfs option to avoid reset when a CS has got stuck. - Add print of the last 8 CS pointers in case of error in QMANs. - Add statistics on opening of the FD of a device. * tag 'misc-habanalabs-next-2021-06-22' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (72 commits) habanalabs/gaudi: refactor hard-reset related code habanalabs/gaudi: add support for NIC DERR habanalabs: add validity check for signal cs habanalabs: get lower/upper 32 bits via masking habanalabs: allow reset upon device release debugfs: add skip_reset_on_timeout option habanalabs: fix typo habanalabs/gaudi: correct driver events numbering habanalabs: remove a rogue #ifdef habanalabs/gaudi: print last QM PQEs on error habanalabs/goya: add '__force' attribute to suppress false alarm habanalabs: added open_stats info ioctl habanalabs/gaudi: set the correct rc in case of err habanalabs/gaudi: update coresight configuration habanalabs: remove node from list before freeing the node habanalabs: set rc as 'valid' in case of intentional func exit habanalabs: zero complex structures using memset habanalabs: print more info when failing to pin user memory habanalabs: Fix an error handling path in 'hl_pci_probe()' habanalabs: print firmware versions ...
2021-06-22Merge tag 'soundwire-5.14-rc1' of ↵Greg Kroah-Hartman14-239/+299
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.14-rc1 Updates for v5.14-rc1 are: - Core has odd updates including improving clock stop codes, write api, handling ENODATA etc - Drivers has Big move of Intel driver to be aux dev and minor updates to Intel/cadence driver * tag 'soundwire-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: stream: Fix test for DP prepare complete soundwire: bus: Make sdw_nwrite() data pointer argument const soundwire: intel: move to auxiliary bus soundwire: cadence: remove the repeated declaration soundwire: dmi-quirks: remove duplicate initialization soundwire: cadence_master: always set CMD_ACCEPT soundwire: bus: add missing \n in dynamic debug soundwire: bus: handle -ENODATA errors in clock stop/start sequences soundwire: add missing kernel-doc description soundwire: bus: only use CLOCK_STOP_MODE0 and fix confusions soundwire: bandwidth allocation: improve error messages soundwire/ASoC: add leading zeroes in peripheral device name
2021-06-21extcon: sm5502: Add support for SM5504Stephan Gerhold3-8/+204
SM5504 is another MUIC from Silicon Mitus that is fairly similar to SM5502. They seem to use the same register set, but: - SM5504 has some additional bits in SM5502_REG_CONTROL - SM5504 has a quite different set of interrupts - SM5504 reports USB OTG as dev_type1 = BIT(0) instead of BIT(7) Overall it's minor and we can support this by defining a separate struct sm5502_type for SM5504. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: sm5502: Refactor driver to use chip-specific structStephan Gerhold2-28/+44
Prepare for supporting SM5504 in the extcon-sm5502 driver by replacing enum sm5504_types with a struct sm5504_type that stores the chip-specific definitions. This struct can then be defined separately for SM5504 without having to add if (type == TYPE_SM5504) everywhere in the code. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21dt-bindings: extcon: sm5502: Document siliconmitus,sm5504-muicStephan Gerhold1-2/+4
Document support for SM5504 with the new siliconmitus,sm5504-muic compatible. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21dt-bindings: extcon: sm5502: Convert to DT schemaStephan Gerhold2-21/+50
Convert the extcon-sm5502 device tree bindings to DT schema. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: sm5502: Implement i2c_driver->probe_new()Stephan Gerhold1-3/+2
sm5022_muic_i2c_probe() does not use the i2c_device_id, so implement i2c_driver->probe_new() instead of probe(). Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: sm5502: Use devm_regmap_add_irq_chip()Stephan Gerhold1-12/+2
Use devm_regmap_add_irq_chip() to avoid having to remove the irqchip explicitly in sm5502_muic_i2c_remove(). Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: max8997: Add missing modalias stringMarek Szyprowski1-0/+1
The platform device driver name is "max8997-muic", so advertise it properly in the modalias string. This fixes automated module loading when this driver is compiled as a module. Fixes: b76668ba8a77 ("Extcon: add MAX8997 extcon driver") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: sm5502: Drop invalid register write in sm5502_reg_dataStephan Gerhold1-1/+0
When sm5502_init_dev_type() iterates over sm5502_reg_data to initialize the registers it is limited by ARRAY_SIZE(sm5502_reg_data). There is no need to add another empty element to sm5502_reg_data. Having the additional empty element in sm5502_reg_data will just result in writing 0xff to register 0x00, which does not really make sense. Fixes: 914b881f9452 ("extcon: sm5502: Add support new SM5502 extcon device driver") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: intel-mrfld: Sync hardware and software state on initFerry Toth1-0/+9
extcon driver for Basin Cove PMIC shadows the switch status used for dwc3 DRD to detect a change in the switch position. This change initializes the status at probe time. Cc: stable@vger.kernel.org Fixes: 492929c54791 ("extcon: mrfld: Introduce extcon driver for Basin Cove PMIC") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21habanalabs/gaudi: refactor hard-reset related codeKoby Elbaz4-47/+56
There is code related to hard-reset, which is done in gaudi specific code. However, this code can be used by future ASICs and therefore it is better to move it to the common code section. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-21habanalabs/gaudi: add support for NIC DERROfir Bitton3-5/+16
We add support for NIC DERR ECC error events, in case this error is received a device reset will be performed. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-21habanalabs: add validity check for signal csfarah kassabri3-24/+75
In preparation for a new feature that allows the user to reserve signals ahead of submissions, we need to change a current assumption in the code. Currently, the driver uses 2 SOBs to support signal CS. When the first SOB reaches max value, the driver switches to the other one and assumes that when it will need to switch back to the first one, all of the signals have already been handled. This assumption won't hold when the new feature will be added, because using signal reservation, the driver can reach the max SOB value very fast. The change is to add a validity check when submitting a signal CS, to make sure the previous SOB is available (all the signals attached to it indeed finished). Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-21habanalabs: get lower/upper 32 bits via maskingKoby Elbaz2-2/+2
fix multiple similar occurrences of the following sparse warning: 'warning: cast truncates bits from constant value (7ffc113000 becomes fc113000)' Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-21habanalabs: allow reset upon device releaseOfir Bitton4-5/+30
We introduce a new type of reset which is reset upon device release. This reset is very similar to soft reset except the fact it is performed only upon device release and not upon user sysfs request nor TDR. The purpose of this reset is to make sure the device is returned to IDLE state after the current user has finished working with the device. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-21phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()Christophe JAILLET1-4/+13
Add an error handling path in the probe to release some resources, as already done in the remove function. Fixes: 609adde838f4 ("phy: Add a driver for dm816x USB PHY") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ac5136881f6bdec50be19b3bf73b3bc1b15ef1f1.1622898974.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21phy: uniphier-pcie: Fix updating phy parametersKunihiko Hayashi1-4/+7
The current driver uses a value from register TEST_O as the original value for register TEST_I, though, the value is overwritten by "param", so there is a bug that the original value isn't no longer used. The value of TEST_O[7:0] should be masked with "mask", replaced with "param", and placed in the bitfield TESTI_DAT_MASK as new TEST_I value. Fixes: c6d9b1324159 ("phy: socionext: add PCIe PHY driver support") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1623037842-19363-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21phy/rockchip: add Innosilicon-based CSI dphyHeiko Stuebner3-0/+469
The CSI dphy found for example on the rk3326/px30 and rk3368 is based on an IP design from Innosilicon. Add a driver for it. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210610212935.3520341-3-heiko@sntech.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21dt-bindings: phy: add yaml binding for rockchip-inno-csi-dphyHeiko Stuebner1-0/+79
Some Rockchip SoCs like the rk3368, rk3326, px30 use a CSI dphy based on an Innosilicon IP. Add a binding for them. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210610212935.3520341-2-heiko@sntech.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21phy: rockchip: remove redundant initialization of pointer cfgColin Ian King1-2/+2
The pointer cfg is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210609113901.185230-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-20soundwire: stream: Fix test for DP prepare completeRichard Fitzgerald1-7/+6
In sdw_prep_deprep_slave_ports(), after the wait_for_completion() the DP prepare status register is read. If this indicates that the port is now prepared, the code should continue with the port setup. It is irrelevant whether the wait_for_completion() timed out if the port is now ready. The previous implementation would always fail if the wait_for_completion() timed out, even if the port was reporting successful prepare. This patch also fixes a minor bug where the return from sdw_read() was not checked for error - any error code with LSBits clear could be misinterpreted as a successful port prepare. Fixes: 79df15b7d37c ("soundwire: Add helpers for ports operations") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210618144745.30629-1-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-20soundwire: bus: Make sdw_nwrite() data pointer argument constRichard Fitzgerald2-5/+5
Idiomatically, write functions should take const pointers to the data buffer, as they don't change the data. They are also likely to be called from functions that receive a const data pointer. Internally the pointer is passed to function/structs shared with the read functions, requiring a cast, but this is an implementation detail that should be hidden by the public API. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210616145901.29402-1-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-18debugfs: add skip_reset_on_timeout optionYuri Nudelman4-0/+17
To be able to debug long-running CS better, without changing the userspace code, we are adding a new option through debugfs interface to skip the reset of the device in case of CS timeout. Signed-off-by: Yuri Nudelman <ynudelman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: fix typoZvika Yehudai1-1/+1
fix a spelling error in comment Signed-off-by: Zvika Yehudai <zyehudai@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs/gaudi: correct driver events numberingOfir Bitton3-16/+20
Currently driver sends fc interrupt id to FW instead of using cpu interrupt id. We intend to fix that and keep backward compatibility by using the same interrupt values. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: remove a rogue #ifdefOded Gabbay1-5/+0
There was a rogue #ifdef that crept into the upstream code for backwards compatibility which isn't needed of course. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs/gaudi: print last QM PQEs on errorOhad Sharabi2-37/+182
In case QMAN has an error and stop_on_err is true, print specific information of the "offending" command buffer batch. If the error occurred on one of the higher CPs, the CQ pointer and size will be printed along with (up to) last 8 PQEs of the stream. If the error occurred in the lower CP, the CQ pointer and size will be printed along with (up to) last 8 PQEs of ALL upper CPs as we have no way to know which upper CP sent the job there. This is done so higher SW levels will be able to debug their CS by extracting the raw data of the offending command buffer batch and examine those offline to detect the issue. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs/goya: add '__force' attribute to suppress false alarmKoby Elbaz1-1/+1
fix (suppress) the following sparse warnings: 'warning: cast removes address space of expression' Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: added open_stats info ioctlYuri Nudelman5-0/+47
In a system with multiple ASICs, there is a need to provide monitoring tools with information on how long a device was opened and how many times a device was opened. Therefore, we add a new opcode to the INFO ioctl to provide that information. Signed-off-by: Yuri Nudelman <ynudelman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs/gaudi: set the correct rc in case of errKoby Elbaz1-1/+3
fix the following smatch warnings: gaudi_internal_cb_pool_init() warn: missing error code 'rc' Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs/gaudi: update coresight configurationTal Albo1-2/+2
Update STMTCSR and STMSYNCR values in order to reduce amount of sync packets Signed-off-by: Tal Albo <talbo@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: remove node from list before freeing the nodeKoby Elbaz2-0/+2
fix the following smatch warnings: goya_pin_memory_before_cs() warn: '&userptr->job_node' not removed from list gaudi_pin_memory_before_cs() warn: '&userptr->job_node' not removed from list Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: set rc as 'valid' in case of intentional func exitKoby Elbaz2-3/+7
fix the following smatch warnings: hl_fw_static_init_cpu() warn: missing error code 'rc' Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: zero complex structures using memsetKoby Elbaz1-1/+2
fix the following sparse warnings: 'warning: Using plain integer as NULL pointer' 'warning: missing braces around initializer' Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: print more info when failing to pin user memoryTomer Tayar1-2/+2
pin_user_pages_fast() might fail and return a negative number, or pin less pages than requested and return the number of the pages that were pinned. For the latter, it is informative to print also the memory size and the number of requested pages. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: Fix an error handling path in 'hl_pci_probe()'Christophe JAILLET1-0/+1
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 2e5eda4681f9 ("habanalabs: PCIe Advanced Error Reporting support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: print firmware versionsOded Gabbay1-10/+95
Firmware in habanalabs devices is composed of several components. During device initialization, we read these versions from the device. Print them during device initialization to allow better visibility in automated systems. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: add hard reset timeout for PLDMOmer Shpigelman2-2/+8
Hard reset flow on PLDM might take more than 2 minutes. Hence add a dedicated hard reset timeout of 6 minutes for PLDM. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-13 17:09:32 +0300