diff options
Diffstat (limited to 'tools')
31 files changed, 524 insertions, 306 deletions
diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c index 5215e0870bcb..6a71324be628 100644 --- a/tools/bpf/bpftool/common.c +++ b/tools/bpf/bpftool/common.c @@ -204,7 +204,11 @@ int do_pin_fd(int fd, const char *name) if (err) return err; - return bpf_obj_pin(fd, name); + err = bpf_obj_pin(fd, name); + if (err) + p_err("can't pin the object (%s): %s", name, strerror(errno)); + + return err; } int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)) @@ -237,7 +241,7 @@ int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)) fd = get_fd_by_id(id); if (fd < 0) { - p_err("can't get prog by id (%u): %s", id, strerror(errno)); + p_err("can't open object by id (%u): %s", id, strerror(errno)); return -1; } diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c index 66f04a4846a5..43fdbbfe41bb 100644 --- a/tools/bpf/bpftool/prog.c +++ b/tools/bpf/bpftool/prog.c @@ -363,7 +363,9 @@ static int do_show(int argc, char **argv) if (fd < 0) return -1; - return show_prog(fd); + err = show_prog(fd); + close(fd); + return err; } if (argc) diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c index f5597503c771..e9ef4ca6a655 100644 --- a/tools/hv/hv_kvp_daemon.c +++ b/tools/hv/hv_kvp_daemon.c @@ -809,7 +809,7 @@ kvp_get_ip_info(int family, char *if_name, int op, int sn_offset = 0; int error = 0; char *buffer; - struct hv_kvp_ipaddr_value *ip_buffer; + struct hv_kvp_ipaddr_value *ip_buffer = NULL; char cidr_mask[5]; /* /xyz */ int weight; int i; diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 4e455018da65..a5aa7d3ac6a1 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -1466,8 +1466,8 @@ union bpf_attr { * If no cookie has been set yet, generate a new cookie. Once * generated, the socket cookie remains stable for the life of the * socket. This helper can be useful for monitoring per socket - * networking traffic statistics as it provides a unique socket - * identifier per namespace. + * networking traffic statistics as it provides a global socket + * identifier that can be assumed unique. * Return * A 8-byte long non-decreasing number on success, or 0 if the * socket field is missing inside *skb*. @@ -1571,8 +1571,11 @@ union bpf_attr { * but this is only implemented for native XDP (with driver * support) as of this writing). * - * All values for *flags* are reserved for future usage, and must - * be left at zero. + * The lower two bits of *flags* are used as the return code if + * the map lookup fails. This is so that the return value can be + * one of the XDP program return codes up to XDP_TX, as chosen by + * the caller. Any higher bits in the *flags* argument must be + * unset. * * When used to redirect packets to net devices, this helper * provides a high performance increase over **bpf_redirect**\ (). diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index 2586b6cb8f34..2b57d7ea7836 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -182,7 +182,6 @@ struct bpf_program { bpf_program_clear_priv_t clear_priv; enum bpf_attach_type expected_attach_type; - int btf_fd; void *func_info; __u32 func_info_rec_size; __u32 func_info_cnt; @@ -313,7 +312,6 @@ void bpf_program__unload(struct bpf_program *prog) prog->instances.nr = -1; zfree(&prog->instances.fds); - zclose(prog->btf_fd); zfree(&prog->func_info); zfree(&prog->line_info); } @@ -392,7 +390,6 @@ bpf_program__init(void *data, size_t size, char *section_name, int idx, prog->instances.fds = NULL; prog->instances.nr = -1; prog->type = BPF_PROG_TYPE_UNSPEC; - prog->btf_fd = -1; return 0; errout: @@ -2288,9 +2285,6 @@ bpf_program_reloc_btf_ext(struct bpf_program *prog, struct bpf_object *obj, prog->line_info_rec_size = btf_ext__line_info_rec_size(obj->btf_ext); } - if (!insn_offset) - prog->btf_fd = btf__fd(obj->btf); - return 0; } @@ -2463,7 +2457,7 @@ load_program(struct bpf_program *prog, struct bpf_insn *insns, int insns_cnt, char *cp, errmsg[STRERR_BUFSIZE]; int log_buf_size = BPF_LOG_BUF_SIZE; char *log_buf; - int ret; + int btf_fd, ret; if (!insns || !insns_cnt) return -EINVAL; @@ -2478,7 +2472,12 @@ load_program(struct bpf_program *prog, struct bpf_insn *insns, int insns_cnt, load_attr.license = license; load_attr.kern_version = kern_version; load_attr.prog_ifindex = prog->prog_ifindex; - load_attr.prog_btf_fd = prog->btf_fd >= 0 ? prog->btf_fd : 0; + /* if .BTF.ext was loaded, kernel supports associated BTF for prog */ + if (prog->obj->btf_ext) + btf_fd = bpf_object__btf_fd(prog->obj); + else + btf_fd = -1; + load_attr.prog_btf_fd = btf_fd >= 0 ? btf_fd : 0; load_attr.func_info = prog->func_info; load_attr.func_info_rec_size = prog->func_info_rec_size; load_attr.func_info_cnt = prog->func_info_cnt; @@ -5000,13 +4999,15 @@ int libbpf_num_possible_cpus(void) static const char *fcpu = "/sys/devices/system/cpu/possible"; int len = 0, n = 0, il = 0, ir = 0; unsigned int start = 0, end = 0; + int tmp_cpus = 0; static int cpus; char buf[128]; int error = 0; int fd = -1; - if (cpus > 0) - return cpus; + tmp_cpus = READ_ONCE(cpus); + if (tmp_cpus > 0) + return tmp_cpus; fd = open(fcpu, O_RDONLY); if (fd < 0) { @@ -5029,7 +5030,7 @@ int libbpf_num_possible_cpus(void) } buf[len] = '\0'; - for (ir = 0, cpus = 0; ir <= len; ir++) { + for (ir = 0, tmp_cpus = 0; ir <= len; ir++) { /* Each sub string separated by ',' has format \d+-\d+ or \d+ */ if (buf[ir] == ',' || buf[ir] == '\0') { buf[ir] = '\0'; @@ -5041,13 +5042,15 @@ int libbpf_num_possible_cpus(void) } else if (n == 1) { end = start; } - cpus += end - start + 1; + tmp_cpus += end - start + 1; il = ir + 1; } } - if (cpus <= 0) { - pr_warning("Invalid #CPUs %d from %s\n", cpus, fcpu); + if (tmp_cpus <= 0) { + pr_warning("Invalid #CPUs %d from %s\n", tmp_cpus, fcpu); return -EINVAL; } - return cpus; + + WRITE_ONCE(cpus, tmp_cpus); + return tmp_cpus; } diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile index 9063fca480b3..c8622497ef23 100644 --- a/tools/power/cpupower/Makefile +++ b/tools/power/cpupower/Makefile @@ -18,7 +18,6 @@ OUTDIR := $(shell cd $(OUTPUT) && pwd) $(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist)) endif -include ../../scripts/Makefile.arch # --- CONFIGURATION BEGIN --- @@ -69,11 +68,6 @@ bindir ?= /usr/bin sbindir ?= /usr/sbin mandir ?= /usr/man includedir ?= /usr/include -ifeq ($(IS_64_BIT), 1) -libdir ?= /usr/lib64 -else -libdir ?= /usr/lib -endif localedir ?= /usr/share/locale docdir ?= /usr/share/doc/packages/cpupower confdir ?= /etc/ @@ -100,6 +94,14 @@ RANLIB = $(CROSS)ranlib HOSTCC = gcc MKDIR = mkdir +# 64bit library detection +include ../../scripts/Makefile.arch + +ifeq ($(IS_64_BIT), 1) +libdir ?= /usr/lib64 +else +libdir ?= /usr/lib +endif # Now we set up the build system # diff --git a/tools/power/cpupower/bench/cpufreq-bench_plot.sh b/tools/power/cpupower/bench/cpufreq-bench_plot.sh index 9061b4f1244e..f5f8b3c8f062 100644 --- a/tools/power/cpupower/bench/cpufreq-bench_plot.sh +++ b/tools/power/cpupower/bench/cpufreq-bench_plot.sh @@ -88,4 +88,4 @@ done echo >> $dir/plot_script.gpl gnuplot $dir/plot_script.gpl -rm -r $dir
\ No newline at end of file +rm -r $dir diff --git a/tools/power/cpupower/bench/cpufreq-bench_script.sh b/tools/power/cpupower/bench/cpufreq-bench_script.sh index 4e9714b876d2..785a3679c704 100644 --- a/tools/power/cpupower/bench/cpufreq-bench_script.sh +++ b/tools/power/cpupower/bench/cpufreq-bench_script.sh @@ -85,4 +85,4 @@ function create_plots() } measure -create_plots
\ No newline at end of file +create_plots diff --git a/tools/power/cpupower/po/de.po b/tools/power/cpupower/po/de.po index 70887bb8ba95..9780a447bb55 100644 --- a/tools/power/cpupower/po/de.po +++ b/tools/power/cpupower/po/de.po @@ -8,66 +8,66 @@ msgstr "" "Project-Id-Version: cpufrequtils 006\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2011-03-08 17:03+0100\n" -"PO-Revision-Date: 2009-08-08 17:18+0100\n" -"Last-Translator: <linux@dominikbrodowski.net>\n" +"PO-Revision-Date: 2019-06-02 15:23+0200\n" +"Last-Translator: Benjamin Weis <benjamin.weis@gmx.com>\n" "Language-Team: NONE\n" "Language: \n" "MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=ISO-8859-1\n" +"Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: utils/idle_monitor/nhm_idle.c:36 msgid "Processor Core C3" -msgstr "" +msgstr "Prozessorkern C3" #: utils/idle_monitor/nhm_idle.c:43 msgid "Processor Core C6" -msgstr "" +msgstr "Prozessorkern C6" #: utils/idle_monitor/nhm_idle.c:51 msgid "Processor Package C3" -msgstr "" +msgstr "Prozessorpaket C3" #: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 msgid "Processor Package C6" -msgstr "" +msgstr "Prozessorpaket C6" #: utils/idle_monitor/snb_idle.c:33 msgid "Processor Core C7" -msgstr "" +msgstr "Prozessorkern C7" #: utils/idle_monitor/snb_idle.c:40 msgid "Processor Package C2" -msgstr "" +msgstr "Prozessorpaket C2" #: utils/idle_monitor/snb_idle.c:47 msgid "Processor Package C7" -msgstr "" +msgstr "Prozessorpaket C7" #: utils/idle_monitor/amd_fam14h_idle.c:56 msgid "Package in sleep state (PC1 or deeper)" -msgstr "" +msgstr "Paket in Schlafzustand (PC1 oder tiefer)" #: utils/idle_monitor/amd_fam14h_idle.c:63 msgid "Processor Package C1" -msgstr "" +msgstr "Prozessorpaket C1" #: utils/idle_monitor/amd_fam14h_idle.c:77 msgid "North Bridge P1 boolean counter (returns 0 or 1)" -msgstr "" +msgstr "North Bridge P1 boolescher Zähler (gibt 0 oder 1 zurück)" #: utils/idle_monitor/mperf_monitor.c:35 msgid "Processor Core not idle" -msgstr "" +msgstr "Prozessorkern ist nicht im Leerlauf" #: utils/idle_monitor/mperf_monitor.c:42 msgid "Processor Core in an idle state" -msgstr "" +msgstr "Prozessorkern ist in einem Ruhezustand" #: utils/idle_monitor/mperf_monitor.c:50 msgid "Average Frequency (including boost) in MHz" -msgstr "" +msgstr "Durchschnittliche Frequenz (einschließlich Boost) in MHz" #: utils/idle_monitor/cpupower-monitor.c:66 #, c-format @@ -75,6 +75,8 @@ msgid "" "cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " "interval_sec | -c command ...]\n" msgstr "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c Befehl ...]\n" #: utils/idle_monitor/cpupower-monitor.c:69 #, c-format @@ -82,36 +84,40 @@ msgid "" "cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " "interval_sec | -c command ...]\n" msgstr "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c Befehl ...]\n" #: utils/idle_monitor/cpupower-monitor.c:71 #, c-format msgid "\t -v: be more verbose\n" -msgstr "" +msgstr "\t -v: ausführlicher\n" #: utils/idle_monitor/cpupower-monitor.c:73 #, c-format msgid "\t -h: print this help\n" -msgstr "" +msgstr "\t -h: diese Hilfe ausgeben\n" #: utils/idle_monitor/cpupower-monitor.c:74 #, c-format msgid "\t -i: time interval to measure for in seconds (default 1)\n" -msgstr "" +msgstr "\t -i: Zeitintervall für die Messung in Sekunden (Standard 1)\n" #: utils/idle_monitor/cpupower-monitor.c:75 #, c-format msgid "\t -t: show CPU topology/hierarchy\n" -msgstr "" +msgstr "\t -t: CPU-Topologie/Hierarchie anzeigen\n" #: utils/idle_monitor/cpupower-monitor.c:76 #, c-format msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" msgstr "" +"\t -l: verfügbare CPU-Schlafwächter auflisten (für Verwendung mit -m)\n" #: utils/idle_monitor/cpupower-monitor.c:77 #, c-format msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" msgstr "" +"\t -m: spezifische CPU-Schlafwächter anzeigen (in gleicher Reihenfolge)\n" #: utils/idle_monitor/cpupower-monitor.c:79 #, c-format @@ -119,71 +125,73 @@ msgid "" "only one of: -t, -l, -m are allowed\n" "If none of them is passed," msgstr "" +"nur einer von: -t, -l, -m ist erlaubt\n" +"Wenn keiner von ihnen übergeben wird," #: utils/idle_monitor/cpupower-monitor.c:80 #, c-format msgid " all supported monitors are shown\n" -msgstr "" +msgstr " werden alle unterstützten Wächter angezeigt\n" #: utils/idle_monitor/cpupower-monitor.c:197 #, c-format msgid "Monitor %s, Counter %s has no count function. Implementation error\n" -msgstr "" +msgstr "Wächter %s, Zähler %s hat keine Zählfunktion. Implementierungsfehler\n" #: utils/idle_monitor/cpupower-monitor.c:207 #, c-format msgid " *is offline\n" -msgstr "" +msgstr " *ist offline\n" #: utils/idle_monitor/cpupower-monitor.c:236 #, c-format msgid "%s: max monitor name length (%d) exceeded\n" -msgstr "" +msgstr "%s: max. Wächternamenslänge (%d) überschritten\n" #: utils/idle_monitor/cpupower-monitor.c:250 #, c-format msgid "No matching monitor found in %s, try -l option\n" -msgstr "" +msgstr "Kein passender Wächter in %s gefunden, versuchen Sie die Option -l\n" #: utils/idle_monitor/cpupower-monitor.c:266 #, c-format msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" -msgstr "" +msgstr "Wächter \"%s\" (%d Zustände) - Könnte nach %u s überlaufen\n" #: utils/idle_monitor/cpupower-monitor.c:319 #, c-format msgid "%s took %.5f seconds and exited with status %d\n" -msgstr "" +msgstr "%s hat %.5f Sekunden gedauert und hat sich mit Status %d beendet\n" #: utils/idle_monitor/cpupower-monitor.c:406 #, c-format msgid "Cannot read number of available processors\n" -msgstr "" +msgstr "Anzahl der verfügbaren Prozessoren kann nicht gelesen werden\n" #: utils/idle_monitor/cpupower-monitor.c:417 #, c-format msgid "Available monitor %s needs root access\n" -msgstr "" +msgstr "Verfügbarer Wächter %s benötigt root-Zugriff\n" #: utils/idle_monitor/cpupower-monitor.c:428 #, c-format msgid "No HW Cstate monitors found\n" -msgstr "" +msgstr "Keine HW C-Zustandswächter gefunden\n" #: utils/cpupower.c:78 #, c-format msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" -msgstr "" +msgstr "cpupower [ -c cpulist ] Unterbefehl [ARGS]\n" #: utils/cpupower.c:79 #, c-format msgid "cpupower --version\n" -msgstr "" +msgstr "cpupower --version\n" #: utils/cpupower.c:80 #, c-format msgid "Supported subcommands are:\n" -msgstr "" +msgstr "Unterstützte Unterbefehle sind:\n" #: utils/cpupower.c:83 #, c-format @@ -191,11 +199,15 @@ msgid "" "\n" "Some subcommands can make use of the -c cpulist option.\n" msgstr "" +"\n" +"Einige Unterbefehle können die Option -c cpulist verwenden.\n" #: utils/cpupower.c:84 #, c-format msgid "Look at the general cpupower manpage how to use it\n" msgstr "" +"Schauen Sie sich die allgemeine cpupower manpage an, um zu erfahren, wie man " +"es benutzt\n" #: utils/cpupower.c:85 #, c-format @@ -217,30 +229,31 @@ msgstr "Bitte melden Sie Fehler an %s.\n" #: utils/cpupower.c:114 #, c-format msgid "Error parsing cpu list\n" -msgstr "" +msgstr "Fehler beim Parsen der CPU-Liste\n" #: utils/cpupower.c:172 #, c-format msgid "Subcommand %s needs root privileges\n" -msgstr "" +msgstr "Unterbefehl %s benötigt root-Rechte\n" #: utils/cpufreq-info.c:31 #, c-format msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" msgstr "" -"Konnte nicht die Anzahl der CPUs herausfinden (%s : %s), nehme daher 1 an.\n" +"Anzahl der CPUs konnte nicht herausgefinden werden (%s: %s), es wird daher 1 " +"angenommen\n" #: utils/cpufreq-info.c:63 #, c-format msgid "" " minimum CPU frequency - maximum CPU frequency - governor\n" -msgstr "" -" minimale CPU-Taktfreq. - maximale CPU-Taktfreq. - Regler \n" +msgstr " minimale CPU-Frequenz - maximale CPU-Frequenz - Regler\n" #: utils/cpufreq-info.c:151 #, c-format msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" msgstr "" +"Fehler beim Evaluieren der Boost-Fähigkeiten bei CPU %d -- sind Sie root?\n" #. P state changes via MSR are identified via cpuid 80000007 #. on Intel and AMD, but we assume boost capable machines can do that @@ -250,50 +263,50 @@ msgstr "" #: utils/cpufreq-info.c:161 #, c-format msgid " boost state support: \n" -msgstr "" +msgstr " Boost-Zustand-Unterstützung: \n" #: utils/cpufreq-info.c:163 #, c-format msgid " Supported: %s\n" -msgstr "" +msgstr " Unterstützt: %s\n" #: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 msgid "yes" -msgstr "" +msgstr "ja" #: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 msgid "no" -msgstr "" +msgstr "nein" #: utils/cpufreq-info.c:164 -#, fuzzy, c-format +#, c-format msgid " Active: %s\n" -msgstr " Treiber: %s\n" +msgstr " Aktiv: %s\n" #: utils/cpufreq-info.c:177 #, c-format msgid " Boost States: %d\n" -msgstr "" +msgstr " Boost-Zustände: %d\n" #: utils/cpufreq-info.c:178 #, c-format msgid " Total States: %d\n" -msgstr "" +msgstr " Gesamtzustände: %d\n" #: utils/cpufreq-info.c:181 #, c-format msgid " Pstate-Pb%d: %luMHz (boost state)\n" -msgstr "" +msgstr " Pstate-Pb%d: %luMHz (Boost-Zustand)\n" #: utils/cpufreq-info.c:184 #, c-format msgid " Pstate-P%d: %luMHz\n" -msgstr "" +msgstr " Pstate-P%d: %luMHz\n" #: utils/cpufreq-info.c:211 #, c-format msgid " no or unknown cpufreq driver is active on this CPU\n" -msgstr " kein oder nicht bestimmbarer cpufreq-Treiber aktiv\n" +msgstr " kein oder ein unbekannter cpufreq-Treiber ist auf dieser CPU aktiv\n" #: utils/cpufreq-info.c:213 #, c-format @@ -303,12 +316,12 @@ msgstr " Treiber: %s\n" #: utils/cpufreq-info.c:219 #, c-format msgid " CPUs which run at the same hardware frequency: " -msgstr " Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: " +msgstr " CPUs, die mit der gleichen Hardwarefrequenz laufen: " #: utils/cpufreq-info.c:230 #, c-format msgid " CPUs which need to have their frequency coordinated by software: " -msgstr " Die Taktfrequenz folgender CPUs werden per Software koordiniert: " +msgstr " CPUs, die ihre Frequenz mit Software koordinieren müssen: " #: utils/cpufreq-info.c:241 #, c-format @@ -318,22 +331,22 @@ msgstr " Maximale Dauer eines Taktfrequenzwechsels: " #: utils/cpufreq-info.c:247 #, c-format msgid " hardware limits: " -msgstr " Hardwarebedingte Grenzen der Taktfrequenz: " +msgstr " Hardwarebegrenzungen: " #: utils/cpufreq-info.c:256 #, c-format msgid " available frequency steps: " -msgstr " mögliche Taktfrequenzen: " +msgstr " verfügbare Frequenzschritte: " #: utils/cpufreq-info.c:269 #, c-format msgid " available cpufreq governors: " -msgstr " mögliche Regler: " +msgstr " verfügbare cpufreq-Regler: " #: utils/cpufreq-info.c:280 #, c-format msgid " current policy: frequency should be within " -msgstr " momentane Taktik: die Frequenz soll innerhalb " +msgstr " momentane Richtlinie: Frequenz sollte innerhalb " #: utils/cpufreq-info.c:282 #, c-format @@ -346,29 +359,28 @@ msgid "" "The governor \"%s\" may decide which speed to use\n" " within this range.\n" msgstr "" -" liegen. Der Regler \"%s\" kann frei entscheiden,\n" -" welche Taktfrequenz innerhalb dieser Grenze verwendet " -"wird.\n" +" sein. Der Regler \"%s\" kann frei entscheiden,\n" +" welche Geschwindigkeit er in diesem Bereich verwendet.\n" #: utils/cpufreq-info.c:293 #, c-format msgid " current CPU frequency is " -msgstr " momentane Taktfrequenz ist " +msgstr " momentane CPU-Frequenz ist " #: utils/cpufreq-info.c:296 #, c-format msgid " (asserted by call to hardware)" -msgstr " (verifiziert durch Nachfrage bei der Hardware)" +msgstr " (durch Aufruf der Hardware sichergestellt)" #: utils/cpufreq-info.c:304 #, c-format msgid " cpufreq stats: " -msgstr " Statistik:" +msgstr " cpufreq-Statistiken: " #: utils/cpufreq-info.c:472 -#, fuzzy, c-format +#, c-format msgid "Usage: cpupower freqinfo [options]\n" -msgstr "Aufruf: cpufreq-info [Optionen]\n" +msgstr "Aufruf: cpupower freqinfo [Optionen]\n" #: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 #: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 @@ -377,11 +389,9 @@ msgid "Options:\n" msgstr "Optionen:\n" #: utils/cpufreq-info.c:474 -#, fuzzy, c-format +#, c-format msgid " -e, --debug Prints out debug information [default]\n" -msgstr "" -" -e, --debug Erzeugt detaillierte Informationen, hilfreich\n" -" zum Aufspüren von Fehlern\n" +msgstr " -e, --debug Gibt Debug-Informationen aus [Standard]\n" #: utils/cpufreq-info.c:475 #, c-format @@ -424,7 +434,7 @@ msgstr " -p, --policy Findet die momentane Taktik heraus *\n" #: utils/cpufreq-info.c:482 #, c-format msgid " -g, --governors Determines available cpufreq governors *\n" -msgstr " -g, --governors Erzeugt eine Liste mit verfügbaren Reglern *\n" +msgstr " -g, --governors Ermittelt verfügbare cpufreq-Regler *\n" #: utils/cpufreq-info.c:483 #, c-format @@ -449,8 +459,7 @@ msgstr "" #: utils/cpufreq-info.c:486 #, c-format msgid " -s, --stats Shows cpufreq statistics if available\n" -msgstr "" -" -s, --stats Zeigt, sofern möglich, Statistiken über cpufreq an.\n" +msgstr " -s, --stats Zeigt cpufreq-Statistiken an, falls vorhanden\n" #: utils/cpufreq-info.c:487 #, c-format @@ -464,13 +473,13 @@ msgstr "" #: utils/cpufreq-info.c:488 #, c-format msgid " -b, --boost Checks for turbo or boost modes *\n" -msgstr "" +msgstr " -b, --boost Prüft auf Turbo- oder Boost-Modi *\n" #: utils/cpufreq-info.c:489 #, c-format msgid "" -" -o, --proc Prints out information like provided by the /proc/" -"cpufreq\n" +" -o, --proc Prints out information like provided by the " +"/proc/cpufreq\n" " interface in 2.4. and early 2.6. kernels\n" msgstr "" " -o, --proc Erzeugt Informationen in einem ähnlichem Format zu " @@ -509,8 +518,8 @@ msgid "" "For the arguments marked with *, omitting the -c or --cpu argument is\n" "equivalent to setting it to zero\n" msgstr "" -"Bei den mit * markierten Parametern wird '--cpu 0' angenommen, soweit nicht\n" -"mittels -c oder --cpu etwas anderes angegeben wird\n" +"Für die mit * markierten Argumente ist das Weglassen des Arguments\n" +"-c oder --cpu gleichbedeutend mit der Einstellung auf Null\n" #: utils/cpufreq-info.c:580 #, c-format @@ -525,8 +534,8 @@ msgid "" "You can't specify more than one --cpu parameter and/or\n" "more than one output-specific argument\n" msgstr "" -"Man kann nicht mehr als einen --cpu-Parameter und/oder mehr als einen\n" -"informationsspezifischen Parameter gleichzeitig angeben\n" +"Sie können nicht mehr als einen Parameter --cpu und/oder\n" +"mehr als ein ausgabespezifisches Argument angeben\n" #: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 #: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 @@ -538,17 +547,17 @@ msgstr "unbekannter oder falscher Parameter\n" #, c-format msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" msgstr "" -"Konnte nicht die CPU %d analysieren, da sie (scheinbar?) nicht existiert.\n" +"CPU %d konnte nicht analysiert werden, da sie scheinbar nicht existiert\n" #: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 #, c-format msgid "analyzing CPU %d:\n" -msgstr "analysiere CPU %d:\n" +msgstr "CPU %d wird analysiert:\n" #: utils/cpufreq-set.c:25 -#, fuzzy, c-format +#, c-format msgid "Usage: cpupower frequency-set [options]\n" -msgstr "Aufruf: cpufreq-set [Optionen]\n" +msgstr "Aufruf: cpupower frequency-set [Optionen]\n" #: utils/cpufreq-set.c:27 #, c-format @@ -556,7 +565,7 @@ msgid "" " -d FREQ, --min FREQ new minimum CPU frequency the governor may " "select\n" msgstr "" -" -d FREQ, --min FREQ neue minimale Taktfrequenz, die der Regler\n" +" -d FREQ, --min FREQ neue minimale CPU-Frequenz, die der Regler\n" " auswählen darf\n" #: utils/cpufreq-set.c:28 @@ -571,7 +580,7 @@ msgstr "" #: utils/cpufreq-set.c:29 #, c-format msgid " -g GOV, --governor GOV new cpufreq governor\n" -msgstr " -g GOV, --governors GOV wechsle zu Regler GOV\n" +msgstr " -g GOV, --governors GOV neuer cpufreq-Regler\n" #: utils/cpufreq-set.c:30 #, c-format @@ -579,29 +588,29 @@ msgid "" " -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" " governor to be available and loaded\n" msgstr "" -" -f FREQ, --freq FREQ setze exakte Taktfrequenz. Benötigt den Regler\n" -" 'userspace'.\n" +" -f FREQ, --freq FREQ bestimmte Frequenz, die eingestellt werden soll.\n" +" Erfordert einen verfügbaren und geladenen " +"userspace-Regler\n" #: utils/cpufreq-set.c:32 #, c-format msgid " -r, --related Switches all hardware-related CPUs\n" -msgstr "" -" -r, --related Setze Werte für alle CPUs, deren Taktfrequenz\n" -" hardwarebedingt identisch ist.\n" +msgstr " -r, --related Schaltet alle hardwarebezogenen CPUs um\n" #: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 #, c-format msgid " -h, --help Prints out this screen\n" -msgstr " -h, --help Gibt diese Kurzübersicht aus\n" +msgstr " -h, --help Gibt diesen Bildschirm aus\n" #: utils/cpufreq-set.c:35 -#, fuzzy, c-format +#, c-format msgid "" "Notes:\n" "1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" msgstr "" -"Bei den mit * markierten Parametern wird '--cpu 0' angenommen, soweit nicht\n" -"mittels -c oder --cpu etwas anderes angegeben wird\n" +"Hinweis:\n" +"1. Das Weglassen des Arguments -c oder --cpu ist gleichbedeutend mit der " +"Einstellung auf \"all\"\n" #: utils/cpufreq-set.c:37 #, fuzzy, c-format @@ -636,17 +645,21 @@ msgid "" "frequency\n" " or because the userspace governor isn't loaded?\n" msgstr "" -"Beim Einstellen ist ein Fehler aufgetreten. Typische Fehlerquellen sind:\n" -"- nicht ausreichende Rechte (Administrator)\n" -"- der Regler ist nicht verfügbar bzw. nicht geladen\n" -"- die angegebene Taktik ist inkorrekt\n" -"- eine spezifische Frequenz wurde angegeben, aber der Regler 'userspace'\n" -" kann entweder hardwarebedingt nicht genutzt werden oder ist nicht geladen\n" +"Fehler beim Festlegen neuer Werte. Häufige Fehler:\n" +"- Verfügen Sie über die erforderlichen Administrationsrechte? (Superuser?)\n" +"- Ist der von Ihnen gewünschte Regler verfügbar und mittels modprobe " +"geladen?\n" +"- Versuchen Sie eine ungültige Richtlinie festzulegen?\n" +"- Versuchen Sie eine bestimmte Frequenz festzulegen, aber der " +"userspace-Regler ist nicht verfügbar,\n" +" z.B. wegen Hardware, die nicht auf eine bestimmte Frequenz eingestellt " +"werden kann\n" +" oder weil der userspace-Regler nicht geladen ist?\n" #: utils/cpufreq-set.c:170 #, c-format msgid "wrong, unknown or unhandled CPU?\n" -msgstr "unbekannte oder nicht regelbare CPU\n" +msgstr "falsche, unbekannte oder nicht regelbare CPU?\n" #: utils/cpufreq-set.c:302 #, c-format @@ -654,8 +667,8 @@ msgid "" "the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" "-g/--governor parameters\n" msgstr "" -"Der -f bzw. --freq-Parameter kann nicht mit den Parametern -d/--min, -u/--" -"max\n" +"Der -f bzw. --freq-Parameter kann nicht mit den Parametern -d/--min, " +"-u/--max\n" "oder -g/--governor kombiniert werden\n" #: utils/cpufreq-set.c:308 @@ -664,18 +677,18 @@ msgid "" "At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" "-g/--governor must be passed\n" msgstr "" -"Es muss mindestens ein Parameter aus -f/--freq, -d/--min, -u/--max oder\n" -"-g/--governor angegeben werden.\n" +"Mindestens ein Parameter aus -f/--freq, -d/--min, -u/--max und\n" +"-g/--governor muss übergeben werden\n" #: utils/cpufreq-set.c:347 #, c-format msgid "Setting cpu: %d\n" -msgstr "" +msgstr "CPU einstellen: %d\n" #: utils/cpupower-set.c:22 #, c-format msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" -msgstr "" +msgstr "Aufruf: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" #: utils/cpupower-set.c:24 #, c-format @@ -689,6 +702,8 @@ msgstr "" msgid "" " -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" msgstr "" +" -m, --sched-mc [VAL] Legt die Mehrkern-Scheduler-Richtlinie des " +"Kernels fest.\n" #: utils/cpupower-set.c:27 #, c-format @@ -700,37 +715,37 @@ msgstr "" #: utils/cpupower-set.c:80 #, c-format msgid "--perf-bias param out of range [0-%d]\n" -msgstr "" +msgstr "--perf-bias-Parameter außerhalb des Bereichs [0-%d]\n" #: utils/cpupower-set.c:91 #, c-format msgid "--sched-mc param out of range [0-%d]\n" -msgstr "" +msgstr "Parameter --sched-mc außerhalb des Bereichs [0-%d]\n" #: utils/cpupower-set.c:102 #, c-format msgid "--sched-smt param out of range [0-%d]\n" -msgstr "" +msgstr "Parameter --sched-smt außerhalb des Bereichs [0-%d]\n" #: utils/cpupower-set.c:121 #, c-format msgid "Error setting sched-mc %s\n" -msgstr "" +msgstr "Fehler beim Einstellen von sched-mc %s\n" #: utils/cpupower-set.c:127 #, c-format msgid "Error setting sched-smt %s\n" -msgstr "" +msgstr "Fehler beim Einstellen von sched-smt %s\n" #: utils/cpupower-set.c:146 #, c-format msgid "Error setting perf-bias value on CPU %d\n" -msgstr "" +msgstr "Fehler beim Einstellen des perf-bias-Wertes auf der CPU %d\n" #: utils/cpupower-info.c:21 #, c-format msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" -msgstr "" +msgstr "Aufruf: cpupower info [ -b ] [ -m ] [ -s ]\n" #: utils/cpupower-info.c:23 #, c-format @@ -740,9 +755,10 @@ msgid "" msgstr "" #: utils/cpupower-info.c:25 -#, fuzzy, c-format +#, c-format msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" -msgstr " -p, --policy Findet die momentane Taktik heraus *\n" +msgstr "" +" -m, --sched-mc Ruft die Mehrkern-Scheduler-Richtlinie des Kernels ab.\n" #: utils/cpupower-info.c:26 #, c-format @@ -756,17 +772,20 @@ msgid "" "\n" "Passing no option will show all info, by default only on core 0\n" msgstr "" +"\n" +"Wenn Sie keine Option übergeben, werden alle Informationen angezeigt, " +"standardmäßig nur auf Kern 0\n" #: utils/cpupower-info.c:102 #, c-format msgid "System's multi core scheduler setting: " -msgstr "" +msgstr "Mehrkern-Scheduler-Einstellung des Systems: " #. if sysfs file is missing it's: errno == ENOENT #: utils/cpupower-info.c:105 utils/cpupower-info.c:114 #, c-format msgid "not supported\n" -msgstr "" +msgstr "nicht unterstützt\n" #: utils/cpupower-info.c:111 #, c-format @@ -786,164 +805,161 @@ msgstr "" #: utils/cpupower-info.c:147 #, c-format msgid "Could not read perf-bias value\n" -msgstr "" +msgstr "perf-bias-Wert konnte nicht gelesen werden\n" #: utils/cpupower-info.c:150 #, c-format msgid "perf-bias: %d\n" -msgstr "" +msgstr "perf-bias: %d\n" #: utils/cpuidle-info.c:28 -#, fuzzy, c-format +#, c-format msgid "Analyzing CPU %d:\n" -msgstr "analysiere CPU %d:\n" +msgstr "CPU %d wird analysiert:\n" #: utils/cpuidle-info.c:32 #, c-format msgid "CPU %u: No idle states\n" -msgstr "" +msgstr "CPU %u: Keine Ruhezustände\n" #: utils/cpuidle-info.c:36 #, c-format msgid "CPU %u: Can't read idle state info\n" -msgstr "" +msgstr "CPU %u: Ruhezustands-Informationen können nicht gelesen werden\n" #: utils/cpuidle-info.c:41 #, c-format msgid "Could not determine max idle state %u\n" -msgstr "" +msgstr "Max. Ruhezustand %u konnte nicht bestimmt werden\n" #: utils/cpuidle-info.c:46 #, c-format msgid "Number of idle states: %d\n" -msgstr "" +msgstr "Anzahl der Ruhezustände: %d\n" #: utils/cpuidle-info.c:48 -#, fuzzy, c-format +#, c-format msgid "Available idle states:" -msgstr " mögliche Taktfrequenzen: " +msgstr "Verfügbare Ruhezustände:" #: utils/cpuidle-info.c:71 #, c-format msgid "Flags/Description: %s\n" -msgstr "" +msgstr "Merker/Beschreibung: %s\n" #: utils/cpuidle-info.c:74 #, c-format msgid "Latency: %lu\n" -msgstr "" +msgstr "Latenz: %lu\n" #: utils/cpuidle-info.c:76 #, c-format msgid "Usage: %lu\n" -msgstr "" +msgstr "Aufruf: %lu\n" #: utils/cpuidle-info.c:78 #, c-format msgid "Duration: %llu\n" -msgstr "" +msgstr "Dauer: %llu\n" #: utils/cpuidle-info.c:90 #, c-format msgid "Could not determine cpuidle driver\n" -msgstr "" +msgstr "cpuidle-Treiber konnte nicht bestimmt werden\n" #: utils/cpuidle-info.c:94 -#, fuzzy, c-format +#, c-format msgid "CPUidle driver: %s\n" -msgstr " Treiber: %s\n" +msgstr "CPUidle-Treiber: %s\n" #: utils/cpuidle-info.c:99 #, c-format msgid "Could not determine cpuidle governor\n" -msgstr "" +msgstr "cpuidle-Regler konnte nicht bestimmt werden\n" #: utils/cpuidle-info.c:103 #, c-format msgid "CPUidle governor: %s\n" -msgstr "" +msgstr "CPUidle-Regler: %s\n" #: utils/cpuidle-info.c:122 #, c-format msgid "CPU %u: Can't read C-state info\n" -msgstr "" +msgstr "CPU %u: C-Zustands-Informationen können nicht gelesen werden\n" #. printf("Cstates: %d\n", cstates); #: utils/cpuidle-info.c:127 #, c-format msgid "active state: C0\n" -msgstr "" +msgstr "aktiver Zustand: C0\n" #: utils/cpuidle-info.c:128 #, c-format msgid "max_cstate: C%u\n" -msgstr "" +msgstr "max_cstate: C%u\n" #: utils/cpuidle-info.c:129 -#, fuzzy, c-format +#, c-format msgid "maximum allowed latency: %lu usec\n" -msgstr " Maximale Dauer eines Taktfrequenzwechsels: " +msgstr "maximal erlaubte Latenz: %lu usec\n" #: utils/cpuidle-info.c:130 #, c-format msgid "states:\t\n" -msgstr "" +msgstr "Zustände:\t\n" #: utils/cpuidle-info.c:132 #, c-format msgid " C%d: type[C%d] " -msgstr "" +msgstr " C%d: Typ[C%d] " #: utils/cpuidle-info.c:134 #, c-format msgid "promotion[--] demotion[--] " -msgstr "" +msgstr "promotion[--] demotion[--] " #: utils/cpuidle-info.c:135 #, c-format msgid "latency[%03lu] " -msgstr "" +msgstr "Latenz[%03lu] " #: utils/cpuidle-info.c:137 #, c-format msgid "usage[%08lu] " -msgstr "" +msgstr "Aufruf[%08lu] " #: utils/cpuidle-info.c:139 #, c-format msgid "duration[%020Lu] \n" -msgstr "" +msgstr "Dauer[%020Lu] \n" #: utils/cpuidle-info.c:147 -#, fuzzy, c-format +#, c-format msgid "Usage: cpupower idleinfo [options]\n" -msgstr "Aufruf: cpufreq-info [Optionen]\n" +msgstr "Aufruf: cpupower idleinfo [Optionen]\n" #: utils/cpuidle-info.c:149 -#, fuzzy, c-format +#, c-format msgid " -s, --silent Only show general C-state information\n" msgstr "" -" -e, --debug Erzeugt detaillierte Informationen, hilfreich\n" -" zum Aufspüren von Fehlern\n" +" -s, --silent Nur allgemeine C-Zustands-Informationen anzeigen\n" #: utils/cpuidle-info.c:150 -#, fuzzy, c-format +#, c-format msgid "" -" -o, --proc Prints out information like provided by the /proc/" -"acpi/processor/*/power\n" +" -o, --proc Prints out information like provided by the " +"/proc/acpi/processor/*/power\n" " interface in older kernels\n" msgstr "" -" -o, --proc Erzeugt Informationen in einem ähnlichem Format zu " -"dem\n" -" der /proc/cpufreq-Datei in 2.4. und frühen 2.6.\n" -" Kernel-Versionen\n" +" -o, --proc Gibt Informationen so aus, wie sie von der " +"Schnittstelle\n" +" /proc/acpi/processor/*/power in älteren Kerneln " +"bereitgestellt werden\n" #: utils/cpuidle-info.c:209 -#, fuzzy, c-format +#, c-format msgid "You can't specify more than one output-specific argument\n" -msgstr "" -"Man kann nicht mehr als einen --cpu-Parameter und/oder mehr als einen\n" -"informationsspezifischen Parameter gleichzeitig angeben\n" +msgstr "Sie können nicht mehr als ein ausgabenspezifisches Argument angeben\n" #~ msgid "" #~ " -c CPU, --cpu CPU CPU number which information shall be determined " @@ -956,6 +972,6 @@ msgstr "" #~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " #~ "modified\n" #~ msgstr "" -#~ " -c CPU, --cpu CPU Nummer der CPU, deren Taktfrequenz-" -#~ "Einstellung\n" +#~ " -c CPU, --cpu CPU Nummer der CPU, deren " +#~ "Taktfrequenz-Einstellung\n" #~ " werden soll\n" diff --git a/tools/power/x86/turbostat/Makefile b/tools/power/x86/turbostat/Makefile index 045f5f7d68ab..13f1e8b9ac52 100644 --- a/tools/power/x86/turbostat/Makefile +++ b/tools/power/x86/turbostat/Makefile @@ -9,9 +9,10 @@ ifeq ("$(origin O)", "command line") endif turbostat : turbostat.c -override CFLAGS += -Wall -I../../../include +override CFLAGS += -O2 -Wall -I../../../include override CFLAGS += -DMSRHEADER='"../../../../arch/x86/include/asm/msr-index.h"' override CFLAGS += -DINTEL_FAMILY_HEADER='"../../../../arch/x86/include/asm/intel-family.h"' +override CFLAGS += -D_FORTIFY_SOURCE=2 %: %.c @mkdir -p $(BUILD_OUTPUT) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 75fc4fb9901c..b2a86438f074 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -39,7 +39,6 @@ FILE *outf; int *fd_percpu; struct timeval interval_tv = {5, 0}; struct timespec interval_ts = {5, 0}; -struct timespec one_msec = {0, 1000000}; unsigned int num_iterations; unsigned int debug; unsigned int quiet; @@ -60,6 +59,7 @@ unsigned int do_irtl_hsw; unsigned int units = 1000000; /* MHz etc */ unsigned int genuine_intel; unsigned int authentic_amd; +unsigned int hygon_genuine; unsigned int max_level, max_extended_level; unsigned int has_invariant_tsc; unsigned int do_nhm_platform_info; @@ -100,6 +100,7 @@ unsigned int has_hwp_epp; /* IA32_HWP_REQUEST[bits 31:24] */ unsigned int has_hwp_pkg; /* IA32_HWP_REQUEST_PKG */ unsigned int has_misc_feature_control; unsigned int first_counter_read = 1; +int ignore_stdin; #define RAPL_PKG (1 << 0) /* 0x610 MSR_PKG_POWER_LIMIT */ @@ -166,6 +167,7 @@ size_t cpu_present_setsize, cpu_affinity_setsize, cpu_subset_size; struct thread_data { struct timeval tv_begin; struct timeval tv_end; + struct timeval tv_delta; unsigned long long tsc; unsigned long long aperf; unsigned long long mperf; @@ -506,6 +508,7 @@ unsigned long long bic_enabled = (0xFFFFFFFFFFFFFFFFULL & ~BIC_DISABLED_BY_DEFAU unsigned long long bic_present = BIC_USEC | BIC_TOD | BIC_sysfs | BIC_APIC | BIC_X2APIC; #define DO_BIC(COUNTER_NAME) (bic_enabled & bic_present & COUNTER_NAME) +#define DO_BIC_READ(COUNTER_NAME) (bic_present & COUNTER_NAME) #define ENABLE_BIC(COUNTER_NAME) (bic_enabled |= COUNTER_NAME) #define BIC_PRESENT(COUNTER_BIT) (bic_present |= COUNTER_BIT) #define BIC_NOT_PRESENT(COUNTER_BIT) (bic_present &= ~COUNTER_BIT) @@ -849,7 +852,6 @@ int dump_counters(struct thread_data *t, struct core_data *c, outp += sprintf(outp, "pc8: %016llX\n", p->pc8); outp += sprintf(outp, "pc9: %016llX\n", p->pc9); outp += sprintf(outp, "pc10: %016llX\n", p->pc10); - outp += sprintf(outp, "pc10: %016llX\n", p->pc10); outp += sprintf(outp, "cpu_lpi: %016llX\n", p->cpu_lpi); outp += sprintf(outp, "sys_lpi: %016llX\n", p->sys_lpi); outp += sprintf(outp, "Joules PKG: %0X\n", p->energy_pkg); @@ -911,7 +913,7 @@ int format_counters(struct thread_data *t, struct core_data *c, if (DO_BIC(BIC_TOD)) outp += sprintf(outp, "%10ld.%06ld\t", t->tv_end.tv_sec, t->tv_end.tv_usec); - interval_float = tv_delta.tv_sec + tv_delta.tv_usec/1000000.0; + interval_float = t->tv_delta.tv_sec + t->tv_delta.tv_usec/1000000.0; tsc = t->tsc * tsc_tweak; @@ -1287,6 +1289,14 @@ delta_core(struct core_data *new, struct core_data *old) } } +int soft_c1_residency_display(int bic) +{ + if (!DO_BIC(BIC_CPU_c1) || use_c1_residency_msr) + return 0; + + return DO_BIC_READ(bic); +} + /* * old = new - old */ @@ -1309,6 +1319,7 @@ delta_thread(struct thread_data *new, struct thread_data *old, * over-write old w/ new so we can print end of interval values */ + timersub(&new->tv_begin, &old->tv_begin, &old->tv_delta); old->tv_begin = new->tv_begin; old->tv_end = new->tv_end; @@ -1322,7 +1333,8 @@ delta_thread(struct thread_data *new, struct thread_data *old, old->c1 = new->c1 - old->c1; - if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz)) { + if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz) || + soft_c1_residency_display(BIC_Avg_MHz)) { if ((new->aperf > old->aperf) && (new->mperf > old->mperf)) { old->aperf = new->aperf - old->aperf; old->mperf = new->mperf - old->mperf; @@ -1404,6 +1416,8 @@ void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data t->tv_begin.tv_usec = 0; t->tv_end.tv_sec = 0; t->tv_end.tv_usec = 0; + t->tv_delta.tv_sec = 0; + t->tv_delta.tv_usec = 0; t->tsc = 0; t->aperf = 0; @@ -1573,6 +1587,9 @@ void compute_average(struct thread_data *t, struct core_data *c, for_all_cpus(sum_counters, t, c, p); + /* Use the global time delta for the average. */ + average.threads.tv_delta = tv_delta; + average.threads.tsc /= topo.num_cpus; average.threads.aperf /= topo.num_cpus; average.threads.mperf /= topo.num_cpus; @@ -1714,7 +1731,7 @@ void get_apic_id(struct thread_data *t) if (!DO_BIC(BIC_X2APIC)) return; - if (authentic_amd) { + if (authentic_amd || hygon_genuine) { unsigned int topology_extensions; if (max_extended_level < 0x8000001e) @@ -1762,19 +1779,20 @@ int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) struct msr_counter *mp; int i; - gettimeofday(&t->tv_begin, (struct timezone *)NULL); - if (cpu_migrate(cpu)) { fprintf(outf, "Could not migrate to CPU %d\n", cpu); return -1; } + gettimeofday(&t->tv_begin, (struct timezone *)NULL); + if (first_counter_read) get_apic_id(t); retry: t->tsc = rdtsc(); /* we are running on local CPU of interest */ - if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz)) { + if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz) || + soft_c1_residency_display(BIC_Avg_MHz)) { unsigned long long tsc_before, tsc_between, tsc_after, aperf_time, mperf_time; /* @@ -1851,20 +1869,20 @@ retry: if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) goto done; - if (DO_BIC(BIC_CPU_c3)) { + if (DO_BIC(BIC_CPU_c3) || soft_c1_residency_display(BIC_CPU_c3)) { if (get_msr(cpu, MSR_CORE_C3_RESIDENCY, &c->c3)) return -6; } - if (DO_BIC(BIC_CPU_c6) && !do_knl_cstates) { + if ((DO_BIC(BIC_CPU_c6) || soft_c1_residency_display(BIC_CPU_c6)) && !do_knl_cstates) { if (get_msr(cpu, MSR_CORE_C6_RESIDENCY, &c->c6)) return -7; - } else if (do_knl_cstates) { + } else if (do_knl_cstates || soft_c1_residency_display(BIC_CPU_c6)) { if (get_msr(cpu, MSR_KNL_CORE_C6_RESIDENCY, &c->c6)) return -7; } - if (DO_BIC(BIC_CPU_c7)) + if (DO_BIC(BIC_CPU_c7) || soft_c1_residency_display(BIC_CPU_c7)) if (get_msr(cpu, MSR_CORE_C7_RESIDENCY, &c->c7)) return -8; @@ -2912,6 +2930,7 @@ int snapshot_cpu_lpi_us(void) if (retval != 1) { fprintf(stderr, "Disabling Low Power Idle CPU output\n"); BIC_NOT_PRESENT(BIC_CPU_LPI); + fclose(fp); return -1; } @@ -2938,6 +2957,7 @@ int snapshot_sys_lpi_us(void) if (retval != 1) { fprintf(stderr, "Disabling Low Power Idle System output\n"); BIC_NOT_PRESENT(BIC_SYS_LPI); + fclose(fp); return -1; } fclose(fp); @@ -2985,8 +3005,6 @@ static void signal_handler (int signal) fprintf(stderr, "SIGUSR1\n"); break; } - /* make sure this manually-invoked interval is at least 1ms long */ - nanosleep(&one_msec, NULL); } void setup_signal_handler(void) @@ -3005,29 +3023,38 @@ void setup_signal_handler(void) void do_sleep(void) { - struct timeval select_timeout; + struct timeval tout; + struct timespec rest; fd_set readfds; int retval; FD_ZERO(&readfds); FD_SET(0, &readfds); - if (!isatty(fileno(stdin))) { + if (ignore_stdin) { nanosleep(&interval_ts, NULL); return; } - select_timeout = interval_tv; - retval = select(1, &readfds, NULL, NULL, &select_timeout); + tout = interval_tv; + retval = select(1, &readfds, NULL, NULL, &tout); if (retval == 1) { switch (getc(stdin)) { case 'q': exit_requested = 1; break; + case EOF: + /* + * 'stdin' is a pipe closed on the other end. There + * won't be any further input. + */ + ignore_stdin = 1; + /* Sleep the rest of the time */ + rest.tv_sec = (tout.tv_sec + tout.tv_usec / 1000000); + rest.tv_nsec = (tout.tv_usec % 1000000) * 1000; + nanosleep(&rest, NULL); } - /* make sure this manually-invoked interval is at least 1ms long */ - nanosleep(&one_msec, NULL); } } @@ -3209,6 +3236,7 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) break; case INTEL_FAM6_HASWELL_CORE: /* HSW */ case INTEL_FAM6_HASWELL_X: /* HSX */ + case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ @@ -3405,6 +3433,7 @@ int has_config_tdp(unsigned int family, unsigned int model) case INTEL_FAM6_IVYBRIDGE: /* IVB */ case INTEL_FAM6_HASWELL_CORE: /* HSW */ case INTEL_FAM6_HASWELL_X: /* HSX */ + case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ @@ -3803,6 +3832,7 @@ double get_tdp_amd(unsigned int family) { switch (family) { case 0x17: + case 0x18: default: /* This is the max stock TDP of HEDT/Server Fam17h chips */ return 250.0; @@ -3841,6 +3871,7 @@ void rapl_probe_intel(unsigned int family, unsigned int model) case INTEL_FAM6_SANDYBRIDGE: case INTEL_FAM6_IVYBRIDGE: case INTEL_FAM6_HASWELL_CORE: /* HSW */ + case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ @@ -3982,6 +4013,7 @@ void rapl_probe_amd(unsigned int family, unsigned int model) switch (family) { case 0x17: /* Zen, Zen+ */ + case 0x18: /* Hygon Dhyana */ do_rapl = RAPL_AMD_F17H | RAPL_PER_CORE_ENERGY; if (rapl_joules) { BIC_PRESENT(BIC_Pkg_J); @@ -4002,7 +4034,7 @@ void rapl_probe_amd(unsigned int family, unsigned int model) rapl_energy_units = ldexp(1.0, -(msr >> 8 & 0x1f)); rapl_power_units = ldexp(1.0, -(msr & 0xf)); - tdp = get_tdp_amd(model); + tdp = get_tdp_amd(family); rapl_joule_counter_range = 0xFFFFFFFF * rapl_energy_units / tdp; if (!quiet) @@ -4018,7 +4050,7 @@ void rapl_probe(unsigned int family, unsigned int model) { if (genuine_intel) rapl_probe_intel(family, model); - if (authentic_amd) + if (authentic_amd || hygon_genuine) rapl_probe_amd(family, model); } @@ -4032,6 +4064,7 @@ void perf_limit_reasons_probe(unsigned int family, unsigned int model) switch (model) { case INTEL_FAM6_HASWELL_CORE: /* HSW */ + case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ do_gfx_perf_limit_reasons = 1; case INTEL_FAM6_HASWELL_X: /* HSX */ @@ -4251,6 +4284,7 @@ int has_snb_msrs(unsigned int family, unsigned int model) case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ case INTEL_FAM6_HASWELL_CORE: /* HSW */ case INTEL_FAM6_HASWELL_X: /* HSW */ + case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ @@ -4267,7 +4301,7 @@ int has_snb_msrs(unsigned int family, unsigned int model) } /* - * HSW adds support for additional MSRs: + * HSW ULT added support for C8/C9/C10 MSRs: * * MSR_PKG_C8_RESIDENCY 0x00000630 * MSR_PKG_C9_RESIDENCY 0x00000631 @@ -4278,13 +4312,13 @@ int has_snb_msrs(unsigned int family, unsigned int model) * MSR_PKGC10_IRTL 0x00000635 * */ -int has_hsw_msrs(unsigned int family, unsigned int model) +int has_c8910_msrs(unsigned int family, unsigned int model) { if (!genuine_intel) return 0; switch (model) { - case INTEL_FAM6_HASWELL_CORE: + case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ @@ -4568,9 +4602,6 @@ unsigned int intel_model_duplicates(unsigned int model) case INTEL_FAM6_XEON_PHI_KNM: return INTEL_FAM6_XEON_PHI_KNL; - case INTEL_FAM6_HASWELL_ULT: - return INTEL_FAM6_HASWELL_CORE; - case INTEL_FAM6_BROADWELL_X: case INTEL_FAM6_BROADWELL_XEON_D: /* BDX-DE */ return INTEL_FAM6_BROADWELL_X; @@ -4582,7 +4613,11 @@ unsigned int intel_model_duplicates(unsigned int model) return INTEL_FAM6_SKYLAKE_MOBILE; case INTEL_FAM6_ICELAKE_MOBILE: + case INTEL_FAM6_ICELAKE_NNPI: return INTEL_FAM6_CANNONLAKE_MOBILE; + + case INTEL_FAM6_ATOM_TREMONT_X: + return INTEL_FAM6_ATOM_GOLDMONT_X; } return model; } @@ -4600,6 +4635,8 @@ void process_cpuid() genuine_intel = 1; else if (ebx == 0x68747541 && ecx == 0x444d4163 && edx == 0x69746e65) authentic_amd = 1; + else if (ebx == 0x6f677948 && ecx == 0x656e6975 && edx == 0x6e65476e) + hygon_genuine = 1; if (!quiet) fprintf(outf, "CPUID(0): %.4s%.4s%.4s ", @@ -4820,12 +4857,12 @@ void process_cpuid() BIC_NOT_PRESENT(BIC_CPU_c7); BIC_NOT_PRESENT(BIC_Pkgpc7); } - if (has_hsw_msrs(family, model)) { + if (has_c8910_msrs(family, model)) { BIC_PRESENT(BIC_Pkgpc8); BIC_PRESENT(BIC_Pkgpc9); BIC_PRESENT(BIC_Pkgpc10); } - do_irtl_hsw = has_hsw_msrs(family, model); + do_irtl_hsw = has_c8910_msrs(family, model); if (has_skl_msrs(family, model)) { BIC_PRESENT(BIC_Totl_c0); BIC_PRESENT(BIC_Any_c0); @@ -5123,7 +5160,7 @@ int initialize_counters(int cpu_id) void allocate_output_buffer() { - output_buffer = calloc(1, (1 + topo.num_cpus) * 1024); + output_buffer = calloc(1, (1 + topo.num_cpus) * 2048); outp = output_buffer; if (outp == NULL) err(-1, "calloc output buffer"); @@ -5269,7 +5306,7 @@ int get_and_dump_counters(void) } void print_version() { - fprintf(outf, "turbostat version 19.03.20" + fprintf(outf, "turbostat version 19.08.31" " - Len Brown <lenb@kernel.org>\n"); } diff --git a/tools/power/x86/x86_energy_perf_policy/Makefile b/tools/power/x86/x86_energy_perf_policy/Makefile index 1fdeef864e7c..666b325a62a2 100644 --- a/tools/power/x86/x86_energy_perf_policy/Makefile +++ b/tools/power/x86/x86_energy_perf_policy/Makefile @@ -9,8 +9,9 @@ ifeq ("$(origin O)", "command line") endif x86_energy_perf_policy : x86_energy_perf_policy.c -override CFLAGS += -Wall -I../../../include +override CFLAGS += -O2 -Wall -I../../../include override CFLAGS += -DMSRHEADER='"../../../../arch/x86/include/asm/msr-index.h"' +override CFLAGS += -D_FORTIFY_SOURCE=2 %: %.c @mkdir -p $(BUILD_OUTPUT) diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 index 17db1c3af4d0..78c6361898b1 100644 --- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 +++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 @@ -40,7 +40,7 @@ in the same processor package. Hardware P-States (HWP) are effectively an expansion of hardware P-state control from the opportunistic turbo-mode P-state range to include the entire range of available P-states. -On Broadwell Xeon, the initial HWP implementation, EBP influenced HWP. +On Broadwell Xeon, the initial HWP implementation, EPB influenced HWP. That influence was removed in subsequent generations, where it was moved to the Energy_Performance_Preference (EPP) field in diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c index 34a796b303fe..3fe1eed900d4 100644 --- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c +++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c @@ -545,7 +545,7 @@ void cmdline(int argc, char **argv) progname = argv[0]; - while ((opt = getopt_long_only(argc, argv, "+a:c:dD:E:e:f:m:M:rt:u:vw", + while ((opt = getopt_long_only(argc, argv, "+a:c:dD:E:e:f:m:M:rt:u:vw:", long_options, &option_index)) != -1) { switch (opt) { case 'a': @@ -1259,6 +1259,15 @@ void probe_dev_msr(void) if (system("/sbin/modprobe msr > /dev/null 2>&1")) err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" "); } + +static void get_cpuid_or_exit(unsigned int leaf, + unsigned int *eax, unsigned int *ebx, + unsigned int *ecx, unsigned int *edx) +{ + if (!__get_cpuid(leaf, eax, ebx, ecx, edx)) + errx(1, "Processor not supported\n"); +} + /* * early_cpuid() * initialize turbo_is_enabled, has_hwp, has_epb @@ -1266,15 +1275,10 @@ void probe_dev_msr(void) */ void early_cpuid(void) { - unsigned int eax, ebx, ecx, edx, max_level; + unsigned int eax, ebx, ecx, edx; unsigned int fms, family, model; - __get_cpuid(0, &max_level, &ebx, &ecx, &edx); - - if (max_level < 6) - errx(1, "Processor not supported\n"); - - __get_cpuid(1, &fms, &ebx, &ecx, &edx); + get_cpuid_or_exit(1, &fms, &ebx, &ecx, &edx); family = (fms >> 8) & 0xf; model = (fms >> 4) & 0xf; if (family == 6 || family == 0xf) @@ -1288,7 +1292,7 @@ void early_cpuid(void) bdx_highest_ratio = msr & 0xFF; } - __get_cpuid(0x6, &eax, &ebx, &ecx, &edx); + get_cpuid_or_exit(0x6, &eax, &ebx, &ecx, &edx); turbo_is_enabled = (eax >> 1) & 1; has_hwp = (eax >> 7) & 1; has_epb = (ecx >> 3) & 1; @@ -1306,7 +1310,7 @@ void parse_cpuid(void) eax = ebx = ecx = edx = 0; - __get_cpuid(0, &max_level, &ebx, &ecx, &edx); + get_cpuid_or_exit(0, &max_level, &ebx, &ecx, &edx); if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e) genuine_intel = 1; @@ -1315,7 +1319,7 @@ void parse_cpuid(void) fprintf(stderr, "CPUID(0): %.4s%.4s%.4s ", (char *)&ebx, (char *)&edx, (char *)&ecx); - __get_cpuid(1, &fms, &ebx, &ecx, &edx); + get_cpuid_or_exit(1, &fms, &ebx, &ecx, &edx); family = (fms >> 8) & 0xf; model = (fms >> 4) & 0xf; stepping = fms & 0xf; @@ -1340,7 +1344,7 @@ void parse_cpuid(void) errx(1, "CPUID: no MSR"); - __get_cpuid(0x6, &eax, &ebx, &ecx, &edx); + get_cpuid_or_exit(0x6, &eax, &ebx, &ecx, &edx); /* turbo_is_enabled already set */ /* has_hwp already set */ has_hwp_notify = eax & (1 << 8); diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index c085964e1d05..96752ebd938f 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -34,6 +34,9 @@ TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test BPF_OBJ_FILES = $(patsubst %.c,%.o, $(notdir $(wildcard progs/*.c))) TEST_GEN_FILES = $(BPF_OBJ_FILES) +BTF_C_FILES = $(wildcard progs/btf_dump_test_case_*.c) +TEST_FILES = $(BTF_C_FILES) + # Also test sub-register code-gen if LLVM has eBPF v3 processor support which # contains both ALU32 and JMP32 instructions. SUBREG_CODEGEN := $(shell echo "int cal(int a) { return a > 0; }" | \ @@ -68,7 +71,8 @@ TEST_PROGS := test_kmod.sh \ TEST_PROGS_EXTENDED := with_addr.sh \ with_tunnels.sh \ tcp_client.py \ - tcp_server.py + tcp_server.py \ + test_xdp_vlan.sh # Compile but not part of 'make run_tests' TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr test_skb_cgroup_id_user \ diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config index f7a0744db31e..5dc109f4c097 100644 --- a/tools/testing/selftests/bpf/config +++ b/tools/testing/selftests/bpf/config @@ -34,3 +34,4 @@ CONFIG_NET_MPLS_GSO=m CONFIG_MPLS_ROUTING=m CONFIG_MPLS_IPTUNNEL=m CONFIG_IPV6_SIT=m +CONFIG_BPF_JIT=y diff --git a/tools/testing/selftests/bpf/test_btf_dump.c b/tools/testing/selftests/bpf/test_btf_dump.c index 8f850823d35f..6e75dd3cb14f 100644 --- a/tools/testing/selftests/bpf/test_btf_dump.c +++ b/tools/testing/selftests/bpf/test_btf_dump.c @@ -97,6 +97,13 @@ int test_btf_dump_case(int n, struct btf_dump_test_case *test_case) } snprintf(test_file, sizeof(test_file), "progs/%s.c", test_case->name); + if (access(test_file, R_OK) == -1) + /* + * When the test is run with O=, kselftest copies TEST_FILES + * without preserving the directory structure. + */ + snprintf(test_file, sizeof(test_file), "%s.c", + test_case->name); /* * Diff test output and expected test output, contained between * START-EXPECTED-OUTPUT and END-EXPECTED-OUTPUT lines in test case. diff --git a/tools/testing/selftests/bpf/test_cgroup_storage.c b/tools/testing/selftests/bpf/test_cgroup_storage.c index 2fc4625c1a15..655729004391 100644 --- a/tools/testing/selftests/bpf/test_cgroup_storage.c +++ b/tools/testing/selftests/bpf/test_cgroup_storage.c @@ -20,9 +20,9 @@ int main(int argc, char **argv) BPF_MOV64_IMM(BPF_REG_2, 0), /* flags, not used */ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_get_local_storage), - BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_0, 0), + BPF_LDX_MEM(BPF_DW, BPF_REG_3, BPF_REG_0, 0), BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, 0x1), - BPF_STX_MEM(BPF_W, BPF_REG_0, BPF_REG_3, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_3, 0), BPF_LD_MAP_FD(BPF_REG_1, 0), /* map fd */ BPF_MOV64_IMM(BPF_REG_2, 0), /* flags, not used */ @@ -30,7 +30,7 @@ int main(int argc, char **argv) BPF_FUNC_get_local_storage), BPF_MOV64_IMM(BPF_REG_1, 1), BPF_STX_XADD(BPF_DW, BPF_REG_0, BPF_REG_1, 0), - BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_0, 0), + BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_0, 0), BPF_ALU64_IMM(BPF_AND, BPF_REG_1, 0x1), BPF_MOV64_REG(BPF_REG_0, BPF_REG_1), BPF_EXIT_INSN(), diff --git a/tools/testing/selftests/bpf/test_sock.c b/tools/testing/selftests/bpf/test_sock.c index fb679ac3d4b0..0e6652733462 100644 --- a/tools/testing/selftests/bpf/test_sock.c +++ b/tools/testing/selftests/bpf/test_sock.c @@ -13,6 +13,7 @@ #include <bpf/bpf.h> #include "cgroup_helpers.h" +#include "bpf_endian.h" #include "bpf_rlimit.h" #include "bpf_util.h" @@ -232,7 +233,8 @@ static struct sock_test tests[] = { /* if (ip == expected && port == expected) */ BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_6, offsetof(struct bpf_sock, src_ip6[3])), - BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 0x01000000, 4), + BPF_JMP_IMM(BPF_JNE, BPF_REG_7, + __bpf_constant_ntohl(0x00000001), 4), BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_6, offsetof(struct bpf_sock, src_port)), BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 0x2001, 2), @@ -261,7 +263,8 @@ static struct sock_test tests[] = { /* if (ip == expected && port == expected) */ BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_6, offsetof(struct bpf_sock, src_ip4)), - BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 0x0100007F, 4), + BPF_JMP_IMM(BPF_JNE, BPF_REG_7, + __bpf_constant_ntohl(0x7F000001), 4), BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_6, offsetof(struct bpf_sock, src_port)), BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 0x1002, 2), diff --git a/tools/testing/selftests/bpf/verifier/loops1.c b/tools/testing/selftests/bpf/verifier/loops1.c index 5e980a5ab69d..1fc4e61e9f9f 100644 --- a/tools/testing/selftests/bpf/verifier/loops1.c +++ b/tools/testing/selftests/bpf/verifier/loops1.c @@ -159,3 +159,31 @@ .errstr = "loop detected", .prog_type = BPF_PROG_TYPE_TRACEPOINT, }, +{ + "not-taken loop with back jump to 1st insn", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 123), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 4, -2), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_XDP, + .retval = 123, +}, +{ + "taken loop with back jump to 1st insn", + .insns = { + BPF_MOV64_IMM(BPF_REG_1, 10), + BPF_MOV64_IMM(BPF_REG_2, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 1), + BPF_EXIT_INSN(), + BPF_ALU64_REG(BPF_ADD, BPF_REG_2, BPF_REG_1), + BPF_ALU64_IMM(BPF_SUB, BPF_REG_1, 1), + BPF_JMP_IMM(BPF_JNE, BPF_REG_1, 0, -3), + BPF_MOV64_REG(BPF_REG_0, BPF_REG_2), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_XDP, + .retval = 55, +}, diff --git a/tools/testing/selftests/kvm/include/evmcs.h b/tools/testing/selftests/kvm/include/evmcs.h index 4059014d93ea..4912d23844bc 100644 --- a/tools/testing/selftests/kvm/include/evmcs.h +++ b/tools/testing/selftests/kvm/include/evmcs.h @@ -220,6 +220,8 @@ struct hv_enlightened_vmcs { struct hv_enlightened_vmcs *current_evmcs; struct hv_vp_assist_page *current_vp_assist; +int vcpu_enable_evmcs(struct kvm_vm *vm, int vcpu_id); + static inline int enable_vp_assist(uint64_t vp_assist_pa, void *vp_assist) { u64 val = (vp_assist_pa & HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_MASK) | diff --git a/tools/testing/selftests/kvm/lib/x86_64/processor.c b/tools/testing/selftests/kvm/lib/x86_64/processor.c index 6cb34a0fa200..0a5e487dbc50 100644 --- a/tools/testing/selftests/kvm/lib/x86_64/processor.c +++ b/tools/testing/selftests/kvm/lib/x86_64/processor.c @@ -1060,9 +1060,11 @@ struct kvm_x86_state *vcpu_save_state(struct kvm_vm *vm, uint32_t vcpuid) TEST_ASSERT(r == 0, "Unexpected result from KVM_GET_XSAVE, r: %i", r); - r = ioctl(vcpu->fd, KVM_GET_XCRS, &state->xcrs); - TEST_ASSERT(r == 0, "Unexpected result from KVM_GET_XCRS, r: %i", - r); + if (kvm_check_cap(KVM_CAP_XCRS)) { + r = ioctl(vcpu->fd, KVM_GET_XCRS, &state->xcrs); + TEST_ASSERT(r == 0, "Unexpected result from KVM_GET_XCRS, r: %i", + r); + } r = ioctl(vcpu->fd, KVM_GET_SREGS, &state->sregs); TEST_ASSERT(r == 0, "Unexpected result from KVM_GET_SREGS, r: %i", @@ -1103,9 +1105,11 @@ void vcpu_load_state(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_x86_state *s TEST_ASSERT(r == 0, "Unexpected result from KVM_SET_XSAVE, r: %i", r); - r = ioctl(vcpu->fd, KVM_SET_XCRS, &state->xcrs); - TEST_ASSERT(r == 0, "Unexpected result from KVM_SET_XCRS, r: %i", - r); + if (kvm_check_cap(KVM_CAP_XCRS)) { + r = ioctl(vcpu->fd, KVM_SET_XCRS, &state->xcrs); + TEST_ASSERT(r == 0, "Unexpected result from KVM_SET_XCRS, r: %i", + r); + } r = ioctl(vcpu->fd, KVM_SET_SREGS, &state->sregs); TEST_ASSERT(r == 0, "Unexpected result from KVM_SET_SREGS, r: %i", diff --git a/tools/testing/selftests/kvm/lib/x86_64/vmx.c b/tools/testing/selftests/kvm/lib/x86_64/vmx.c index 204f847bd065..9cef0455b819 100644 --- a/tools/testing/selftests/kvm/lib/x86_64/vmx.c +++ b/tools/testing/selftests/kvm/lib/x86_64/vmx.c @@ -12,6 +12,26 @@ bool enable_evmcs; +int vcpu_enable_evmcs(struct kvm_vm *vm, int vcpu_id) +{ + uint16_t evmcs_ver; + + struct kvm_enable_cap enable_evmcs_cap = { + .cap = KVM_CAP_HYPERV_ENLIGHTENED_VMCS, + .args[0] = (unsigned long)&evmcs_ver + }; + + vcpu_ioctl(vm, vcpu_id, KVM_ENABLE_CAP, &enable_evmcs_cap); + + /* KVM should return supported EVMCS version range */ + TEST_ASSERT(((evmcs_ver >> 8) >= (evmcs_ver & 0xff)) && + (evmcs_ver & 0xff) > 0, + "Incorrect EVMCS version range: %x:%x\n", + evmcs_ver & 0xff, evmcs_ver >> 8); + + return evmcs_ver; +} + /* Allocate memory regions for nested VMX tests. * * Input Args: diff --git a/tools/testing/selftests/kvm/x86_64/evmcs_test.c b/tools/testing/selftests/kvm/x86_64/evmcs_test.c index f95c08343b48..92915e6408e7 100644 --- a/tools/testing/selftests/kvm/x86_64/evmcs_test.c +++ b/tools/testing/selftests/kvm/x86_64/evmcs_test.c @@ -79,11 +79,6 @@ int main(int argc, char *argv[]) struct kvm_x86_state *state; struct ucall uc; int stage; - uint16_t evmcs_ver; - struct kvm_enable_cap enable_evmcs_cap = { - .cap = KVM_CAP_HYPERV_ENLIGHTENED_VMCS, - .args[0] = (unsigned long)&evmcs_ver - }; /* Create VM */ vm = vm_create_default(VCPU_ID, 0, guest_code); @@ -96,13 +91,7 @@ int main(int argc, char *argv[]) exit(KSFT_SKIP); } - vcpu_ioctl(vm, VCPU_ID, KVM_ENABLE_CAP, &enable_evmcs_cap); - - /* KVM should return supported EVMCS version range */ - TEST_ASSERT(((evmcs_ver >> 8) >= (evmcs_ver & 0xff)) && - (evmcs_ver & 0xff) > 0, - "Incorrect EVMCS version range: %x:%x\n", - evmcs_ver & 0xff, evmcs_ver >> 8); + vcpu_enable_evmcs(vm, VCPU_ID); run = vcpu_state(vm, VCPU_ID); @@ -146,7 +135,7 @@ int main(int argc, char *argv[]) kvm_vm_restart(vm, O_RDWR); vm_vcpu_add(vm, VCPU_ID); vcpu_set_cpuid(vm, VCPU_ID, kvm_get_supported_cpuid()); - vcpu_ioctl(vm, VCPU_ID, KVM_ENABLE_CAP, &enable_evmcs_cap); + vcpu_enable_evmcs(vm, VCPU_ID); vcpu_load_state(vm, VCPU_ID, state); run = vcpu_state(vm, VCPU_ID); free(state); diff --git a/tools/testing/selftests/kvm/x86_64/hyperv_cpuid.c b/tools/testing/selftests/kvm/x86_64/hyperv_cpuid.c index f72b3043db0e..ee59831fbc98 100644 --- a/tools/testing/selftests/kvm/x86_64/hyperv_cpuid.c +++ b/tools/testing/selftests/kvm/x86_64/hyperv_cpuid.c @@ -18,6 +18,7 @@ #include "test_util.h" #include "kvm_util.h" #include "processor.h" +#include "vmx.h" #define VCPU_ID 0 @@ -106,12 +107,7 @@ int main(int argc, char *argv[]) { struct kvm_vm *vm; int rv; - uint16_t evmcs_ver; struct kvm_cpuid2 *hv_cpuid_entries; - struct kvm_enable_cap enable_evmcs_cap = { - .cap = KVM_CAP_HYPERV_ENLIGHTENED_VMCS, - .args[0] = (unsigned long)&evmcs_ver - }; /* Tell stdout not to buffer its content */ setbuf(stdout, NULL); @@ -136,14 +132,14 @@ int main(int argc, char *argv[]) free(hv_cpuid_entries); - rv = _vcpu_ioctl(vm, VCPU_ID, KVM_ENABLE_CAP, &enable_evmcs_cap); - - if (rv) { + if (!kvm_check_cap(KVM_CAP_HYPERV_ENLIGHTENED_VMCS)) { fprintf(stderr, "Enlightened VMCS is unsupported, skip related test\n"); goto vm_free; } + vcpu_enable_evmcs(vm, VCPU_ID); + hv_cpuid_entries = kvm_get_supported_hv_cpuid(vm); if (!hv_cpuid_entries) return 1; diff --git a/tools/testing/selftests/kvm/x86_64/platform_info_test.c b/tools/testing/selftests/kvm/x86_64/platform_info_test.c index 40050e44ec0a..f9334bd3cce9 100644 --- a/tools/testing/selftests/kvm/x86_64/platform_info_test.c +++ b/tools/testing/selftests/kvm/x86_64/platform_info_test.c @@ -99,8 +99,8 @@ int main(int argc, char *argv[]) msr_platform_info = vcpu_get_msr(vm, VCPU_ID, MSR_PLATFORM_INFO); vcpu_set_msr(vm, VCPU_ID, MSR_PLATFORM_INFO, msr_platform_info | MSR_PLATFORM_INFO_MAX_TURBO_RATIO); - test_msr_platform_info_disabled(vm); test_msr_platform_info_enabled(vm); + test_msr_platform_info_disabled(vm); vcpu_set_msr(vm, VCPU_ID, MSR_PLATFORM_INFO, msr_platform_info); kvm_vm_free(vm); diff --git a/tools/testing/selftests/kvm/x86_64/vmx_set_nested_state_test.c b/tools/testing/selftests/kvm/x86_64/vmx_set_nested_state_test.c index ed7218d166da..853e370e8a39 100644 --- a/tools/testing/selftests/kvm/x86_64/vmx_set_nested_state_test.c +++ b/tools/testing/selftests/kvm/x86_64/vmx_set_nested_state_test.c @@ -25,24 +25,17 @@ #define VMCS12_REVISION 0x11e57ed0 #define VCPU_ID 5 +bool have_evmcs; + void test_nested_state(struct kvm_vm *vm, struct kvm_nested_state *state) { - volatile struct kvm_run *run; - vcpu_nested_state_set(vm, VCPU_ID, state, false); - run = vcpu_state(vm, VCPU_ID); - vcpu_run(vm, VCPU_ID); - TEST_ASSERT(run->exit_reason == KVM_EXIT_SHUTDOWN, - "Got exit_reason other than KVM_EXIT_SHUTDOWN: %u (%s),\n", - run->exit_reason, - exit_reason_str(run->exit_reason)); } void test_nested_state_expect_errno(struct kvm_vm *vm, struct kvm_nested_state *state, int expected_errno) { - volatile struct kvm_run *run; int rv; rv = vcpu_nested_state_set(vm, VCPU_ID, state, true); @@ -50,12 +43,6 @@ void test_nested_state_expect_errno(struct kvm_vm *vm, "Expected %s (%d) from vcpu_nested_state_set but got rv: %i errno: %s (%d)", strerror(expected_errno), expected_errno, rv, strerror(errno), errno); - run = vcpu_state(vm, VCPU_ID); - vcpu_run(vm, VCPU_ID); - TEST_ASSERT(run->exit_reason == KVM_EXIT_SHUTDOWN, - "Got exit_reason other than KVM_EXIT_SHUTDOWN: %u (%s),\n", - run->exit_reason, - exit_reason_str(run->exit_reason)); } void test_nested_state_expect_einval(struct kvm_vm *vm, @@ -90,8 +77,9 @@ void set_default_vmx_state(struct kvm_nested_state *state, int size) { memset(state, 0, size); state->flags = KVM_STATE_NESTED_GUEST_MODE | - KVM_STATE_NESTED_RUN_PENDING | - KVM_STATE_NESTED_EVMCS; + KVM_STATE_NESTED_RUN_PENDING; + if (have_evmcs) + state->flags |= KVM_STATE_NESTED_EVMCS; state->format = 0; state->size = size; state->hdr.vmx.vmxon_pa = 0x1000; @@ -141,13 +129,19 @@ void test_vmx_nested_state(struct kvm_vm *vm) /* * Setting vmxon_pa == -1ull and vmcs_pa == -1ull exits early without * setting the nested state but flags other than eVMCS must be clear. + * The eVMCS flag can be set if the enlightened VMCS capability has + * been enabled. */ set_default_vmx_state(state, state_sz); state->hdr.vmx.vmxon_pa = -1ull; state->hdr.vmx.vmcs12_pa = -1ull; test_nested_state_expect_einval(vm, state); - state->flags = KVM_STATE_NESTED_EVMCS; + state->flags &= KVM_STATE_NESTED_EVMCS; + if (have_evmcs) { + test_nested_state_expect_einval(vm, state); + vcpu_enable_evmcs(vm, VCPU_ID); + } test_nested_state(vm, state); /* It is invalid to have vmxon_pa == -1ull and SMM flags non-zero. */ @@ -232,6 +226,8 @@ int main(int argc, char *argv[]) struct kvm_nested_state state; struct kvm_cpuid_entry2 *entry = kvm_get_supported_cpuid_entry(1); + have_evmcs = kvm_check_cap(KVM_CAP_HYPERV_ENLIGHTENED_VMCS); + if (!kvm_check_cap(KVM_CAP_NESTED_STATE)) { printf("KVM_CAP_NESTED_STATE not available, skipping test\n"); exit(KSFT_SKIP); diff --git a/tools/testing/selftests/net/tcp_fastopen_backup_key.sh b/tools/testing/selftests/net/tcp_fastopen_backup_key.sh index 41476399e184..f6e65674b83c 100755 --- a/tools/testing/selftests/net/tcp_fastopen_backup_key.sh +++ b/tools/testing/selftests/net/tcp_fastopen_backup_key.sh @@ -30,7 +30,7 @@ do_test() { ip netns exec "${NETNS}" ./tcp_fastopen_backup_key "$1" val=$(ip netns exec "${NETNS}" nstat -az | \ grep TcpExtTCPFastOpenPassiveFail | awk '{print $2}') - if [ $val -ne 0 ]; then + if [ "$val" != 0 ]; then echo "FAIL: TcpExtTCPFastOpenPassiveFail non-zero" return 1 fi diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh index fe52488a6f72..16571ac1dab4 100755 --- a/tools/testing/selftests/netfilter/nft_flowtable.sh +++ b/tools/testing/selftests/netfilter/nft_flowtable.sh @@ -321,4 +321,52 @@ else ip netns exec nsr1 nft list ruleset fi +KEY_SHA="0x"$(ps -xaf | sha1sum | cut -d " " -f 1) +KEY_AES="0x"$(ps -xaf | md5sum | cut -d " " -f 1) +SPI1=$RANDOM +SPI2=$RANDOM + +if [ $SPI1 -eq $SPI2 ]; then + SPI2=$((SPI2+1)) +fi + +do_esp() { + local ns=$1 + local me=$2 + local remote=$3 + local lnet=$4 + local rnet=$5 + local spi_out=$6 + local spi_in=$7 + + ip -net $ns xfrm state add src $remote dst $me proto esp spi $spi_in enc aes $KEY_AES auth sha1 $KEY_SHA mode tunnel sel src $rnet dst $lnet + ip -net $ns xfrm state add src $me dst $remote proto esp spi $spi_out enc aes $KEY_AES auth sha1 $KEY_SHA mode tunnel sel src $lnet dst $rnet + + # to encrypt packets as they go out (includes forwarded packets that need encapsulation) + ip -net $ns xfrm policy add src $lnet dst $rnet dir out tmpl src $me dst $remote proto esp mode tunnel priority 1 action allow + # to fwd decrypted packets after esp processing: + ip -net $ns xfrm policy add src $rnet dst $lnet dir fwd tmpl src $remote dst $me proto esp mode tunnel priority 1 action allow + +} + +do_esp nsr1 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2 + +do_esp nsr2 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1 + +ip netns exec nsr1 nft delete table ip nat + +# restore default routes +ip -net ns2 route del 192.168.10.1 via 10.0.2.1 +ip -net ns2 route add default via 10.0.2.1 +ip -net ns2 route add default via dead:2::1 + +test_tcp_forwarding ns1 ns2 +if [ $? -eq 0 ] ;then + echo "PASS: ipsec tunnel mode for ns1/ns2" +else + echo "FAIL: ipsec tunnel mode for ns1/ns2" + ip netns exec nsr1 nft list ruleset 1>&2 + ip netns exec nsr1 cat /proc/net/xfrm_stat 1>&2 +fi + exit $ret diff --git a/tools/testing/selftests/tc-testing/plugin-lib/nsPlugin.py b/tools/testing/selftests/tc-testing/plugin-lib/nsPlugin.py index affa7f2d9670..9539cffa9e5e 100644 --- a/tools/testing/selftests/tc-testing/plugin-lib/nsPlugin.py +++ b/tools/testing/selftests/tc-testing/plugin-lib/nsPlugin.py @@ -64,7 +64,7 @@ class SubPlugin(TdcPlugin): cmdlist.insert(0, self.args.NAMES['NS']) cmdlist.insert(0, 'exec') cmdlist.insert(0, 'netns') - cmdlist.insert(0, 'ip') + cmdlist.insert(0, self.args.NAMES['IP']) else: pass @@ -78,16 +78,16 @@ class SubPlugin(TdcPlugin): return command def _ports_create(self): - cmd = 'ip link add $DEV0 type veth peer name $DEV1' + cmd = '$IP link add $DEV0 type veth peer name $DEV1' self._exec_cmd('pre', cmd) - cmd = 'ip link set $DEV0 up' + cmd = '$IP link set $DEV0 up' self._exec_cmd('pre', cmd) if not self.args.namespace: - cmd = 'ip link set $DEV1 up' + cmd = '$IP link set $DEV1 up' self._exec_cmd('pre', cmd) def _ports_destroy(self): - cmd = 'ip link del $DEV0' + cmd = '$IP link del $DEV0' self._exec_cmd('post', cmd) def _ns_create(self): @@ -97,16 +97,16 @@ class SubPlugin(TdcPlugin): ''' self._ports_create() if self.args.namespace: - cmd = 'ip netns add {}'.format(self.args.NAMES['NS']) + cmd = '$IP netns add {}'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) - cmd = 'ip link set $DEV1 netns {}'.format(self.args.NAMES['NS']) + cmd = '$IP link set $DEV1 netns {}'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) - cmd = 'ip -n {} link set $DEV1 up'.format(self.args.NAMES['NS']) + cmd = '$IP -n {} link set $DEV1 up'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) if self.args.device: - cmd = 'ip link set $DEV2 netns {}'.format(self.args.NAMES['NS']) + cmd = '$IP link set $DEV2 netns {}'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) - cmd = 'ip -n {} link set $DEV2 up'.format(self.args.NAMES['NS']) + cmd = '$IP -n {} link set $DEV2 up'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) def _ns_destroy(self): @@ -115,7 +115,7 @@ class SubPlugin(TdcPlugin): devices as well) ''' if self.args.namespace: - cmd = 'ip netns delete {}'.format(self.args.NAMES['NS']) + cmd = '$IP netns delete {}'.format(self.args.NAMES['NS']) self._exec_cmd('post', cmd) def _exec_cmd(self, stage, command): diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json b/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json index bf5ebf59c2d4..9cdd2e31ac2c 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json @@ -670,5 +670,52 @@ "teardown": [ "$TC actions flush action skbedit" ] + }, + { + "id": "630c", + "name": "Add batch of 32 skbedit actions with all parameters and cookie", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action skbedit queue_mapping 2 priority 10 mark 7/0xaabbccdd ptype host inheritdsfield index \\$i cookie aabbccddeeff112233445566778800a1 \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "32", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "706d", + "name": "Delete batch of 32 skbedit actions with all parameters", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ], + "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action skbedit queue_mapping 2 priority 10 mark 7/0xaabbccdd ptype host inheritdsfield index \\$i \\\"; args=\\\"\\$args\\$cmd\\\"; done && $TC actions add \\$args\"" + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action skbedit index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions del \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "0", + "teardown": [] } ] |