diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/power/x86/turbostat/turbostat.8 | 4 | ||||
| -rw-r--r-- | tools/power/x86/turbostat/turbostat.c | 120 | ||||
| -rw-r--r-- | tools/testing/selftests/ftrace/test.d/00basic/snapshot.tc | 28 | ||||
| -rw-r--r-- | tools/testing/selftests/net/tcp_mmap.c | 2 | ||||
| -rw-r--r-- | tools/usb/ffs-test.c | 19 | ||||
| -rw-r--r-- | tools/virtio/asm/barrier.h | 4 | ||||
| -rw-r--r-- | tools/virtio/linux/kernel.h | 5 |
7 files changed, 111 insertions, 71 deletions
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8 index d39e4ff7d0bf..a6db83a88e85 100644 --- a/tools/power/x86/turbostat/turbostat.8 +++ b/tools/power/x86/turbostat/turbostat.8 @@ -106,7 +106,7 @@ The system configuration dump (if --quiet is not used) is followed by statistics \fBC1%, C2%, C3%\fP The residency percentage that Linux requested C1, C2, C3.... The system summary is the average of all CPUs in the system. Note that these are software, reflecting what was requested. The hardware counters reflect what was actually achieved. \fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states. These numbers are from hardware residency counters. \fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor. -\fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor. +\fBPkgTmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor. \fBGFX%rc6\fP The percentage of time the GPU is in the "render C6" state, rc6, during the measurement interval. From /sys/class/drm/card0/power/rc6_residency_ms. \fBGFXMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz. \fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states. These numbers are from hardware residency counters. @@ -114,7 +114,7 @@ The system configuration dump (if --quiet is not used) is followed by statistics \fBCorWatt\fP Watts consumed by the core part of the package. \fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors. \fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors. -\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package. +\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package. Note that the system summary is the sum of the package throttling time, and thus may be higher than 100% on a multi-package system. Note that the meaning of this field is model specific. For example, some hardware increments this counter when RAPL responds to thermal limits, but does not increment this counter when RAPL responds to power limits. Comparing PkgWatt and PkgTmp to system limits is necessary. \fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM. .fi .SH TOO MUCH INFORMATION EXAMPLE diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 4d14bbbf9b63..980bd9d20646 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -1163,9 +1163,7 @@ void format_all_counters(struct thread_data *t, struct core_data *c, struct pkg_ if (!printed || !summary_only) print_header("\t"); - if (topo.num_cpus > 1) - format_counters(&average.threads, &average.cores, - &average.packages); + format_counters(&average.threads, &average.cores, &average.packages); printed = 1; @@ -1692,7 +1690,7 @@ void get_apic_id(struct thread_data *t) t->x2apic_id = edx; if (debug && (t->apic_id != t->x2apic_id)) - fprintf(stderr, "cpu%d: apic 0x%x x2apic 0x%x\n", t->cpu_id, t->apic_id, t->x2apic_id); + fprintf(outf, "cpu%d: apic 0x%x x2apic 0x%x\n", t->cpu_id, t->apic_id, t->x2apic_id); } /* @@ -2473,55 +2471,43 @@ int get_core_id(int cpu) void set_node_data(void) { - char path[80]; - FILE *filep; - int pkg, node, cpu; - - struct pkg_node_info { - int count; - int min; - } *pni; - - pni = calloc(topo.num_packages, sizeof(struct pkg_node_info)); - if (!pni) - err(1, "calloc pkg_node_count"); - - for (pkg = 0; pkg < topo.num_packages; pkg++) - pni[pkg].min = topo.num_cpus; - - for (node = 0; node <= topo.max_node_num; node++) { - /* find the "first" cpu in the node */ - sprintf(path, "/sys/bus/node/devices/node%d/cpulist", node); - filep = fopen(path, "r"); - if (!filep) - continue; - fscanf(filep, "%d", &cpu); - fclose(filep); - - pkg = cpus[cpu].physical_package_id; - pni[pkg].count++; - - if (node < pni[pkg].min) - pni[pkg].min = node; - } - - for (pkg = 0; pkg < topo.num_packages; pkg++) - if (pni[pkg].count > topo.nodes_per_pkg) - topo.nodes_per_pkg = pni[0].count; - - /* Fake 1 node per pkg for machines that don't - * expose nodes and thus avoid -nan results - */ - if (topo.nodes_per_pkg == 0) - topo.nodes_per_pkg = 1; - - for (cpu = 0; cpu < topo.num_cpus; cpu++) { - pkg = cpus[cpu].physical_package_id; - node = cpus[cpu].physical_node_id; - cpus[cpu].logical_node_id = node - pni[pkg].min; + int pkg, node, lnode, cpu, cpux; + int cpu_count; + + /* initialize logical_node_id */ + for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) + cpus[cpu].logical_node_id = -1; + + cpu_count = 0; + for (pkg = 0; pkg < topo.num_packages; pkg++) { + lnode = 0; + for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) { + if (cpus[cpu].physical_package_id != pkg) + continue; + /* find a cpu with an unset logical_node_id */ + if (cpus[cpu].logical_node_id != -1) + continue; + cpus[cpu].logical_node_id = lnode; + node = cpus[cpu].physical_node_id; + cpu_count++; + /* + * find all matching cpus on this pkg and set + * the logical_node_id + */ + for (cpux = cpu; cpux <= topo.max_cpu_num; cpux++) { + if ((cpus[cpux].physical_package_id == pkg) && + (cpus[cpux].physical_node_id == node)) { + cpus[cpux].logical_node_id = lnode; + cpu_count++; + } + } + lnode++; + if (lnode > topo.nodes_per_pkg) + topo.nodes_per_pkg = lnode; + } + if (cpu_count >= topo.max_cpu_num) + break; } - free(pni); - } int get_physical_node_id(struct cpu_topology *thiscpu) @@ -4471,7 +4457,9 @@ void process_cpuid() family = (fms >> 8) & 0xf; model = (fms >> 4) & 0xf; stepping = fms & 0xf; - if (family == 6 || family == 0xf) + if (family == 0xf) + family += (fms >> 20) & 0xff; + if (family >= 6) model += ((fms >> 16) & 0xf) << 4; if (!quiet) { @@ -4840,16 +4828,8 @@ void topology_probe() siblings = get_thread_siblings(&cpus[i]); if (siblings > max_siblings) max_siblings = siblings; - if (cpus[i].thread_id != -1) + if (cpus[i].thread_id == 0) topo.num_cores++; - - if (debug > 1) - fprintf(outf, - "cpu %d pkg %d node %d core %d thread %d\n", - i, cpus[i].physical_package_id, - cpus[i].physical_node_id, - cpus[i].physical_core_id, - cpus[i].thread_id); } topo.cores_per_node = max_core_id + 1; @@ -4875,6 +4855,20 @@ void topology_probe() topo.threads_per_core = max_siblings; if (debug > 1) fprintf(outf, "max_siblings %d\n", max_siblings); + + if (debug < 1) + return; + + for (i = 0; i <= topo.max_cpu_num; ++i) { + fprintf(outf, + "cpu %d pkg %d node %d lnode %d core %d thread %d\n", + i, cpus[i].physical_package_id, + cpus[i].physical_node_id, + cpus[i].logical_node_id, + cpus[i].physical_core_id, + cpus[i].thread_id); + } + } void @@ -5102,7 +5096,7 @@ int get_and_dump_counters(void) } void print_version() { - fprintf(outf, "turbostat version 18.06.20" + fprintf(outf, "turbostat version 18.07.27" " - Len Brown <lenb@kernel.org>\n"); } diff --git a/tools/testing/selftests/ftrace/test.d/00basic/snapshot.tc b/tools/testing/selftests/ftrace/test.d/00basic/snapshot.tc new file mode 100644 index 000000000000..3b1f45e13a2e --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/00basic/snapshot.tc @@ -0,0 +1,28 @@ +#!/bin/sh +# description: Snapshot and tracing setting +# flags: instance + +[ ! -f snapshot ] && exit_unsupported + +echo "Set tracing off" +echo 0 > tracing_on + +echo "Allocate and take a snapshot" +echo 1 > snapshot + +# Since trace buffer is empty, snapshot is also empty, but allocated +grep -q "Snapshot is allocated" snapshot + +echo "Ensure keep tracing off" +test `cat tracing_on` -eq 0 + +echo "Set tracing on" +echo 1 > tracing_on + +echo "Take a snapshot again" +echo 1 > snapshot + +echo "Ensure keep tracing on" +test `cat tracing_on` -eq 1 + +exit 0 diff --git a/tools/testing/selftests/net/tcp_mmap.c b/tools/testing/selftests/net/tcp_mmap.c index 77f762780199..e8c5dff448eb 100644 --- a/tools/testing/selftests/net/tcp_mmap.c +++ b/tools/testing/selftests/net/tcp_mmap.c @@ -402,7 +402,7 @@ int main(int argc, char *argv[]) exit(1); } - fd = socket(AF_INET6, SOCK_STREAM, 0); + fd = socket(cfg_family, SOCK_STREAM, 0); if (fd == -1) { perror("socket"); exit(1); diff --git a/tools/usb/ffs-test.c b/tools/usb/ffs-test.c index 95dd14648ba5..0f395dfb7774 100644 --- a/tools/usb/ffs-test.c +++ b/tools/usb/ffs-test.c @@ -44,12 +44,25 @@ /******************** Little Endian Handling ********************************/ -#define cpu_to_le16(x) htole16(x) -#define cpu_to_le32(x) htole32(x) +/* + * cpu_to_le16/32 are used when initializing structures, a context where a + * function call is not allowed. To solve this, we code cpu_to_le16/32 in a way + * that allows them to be used when initializing structures. + */ + +#if __BYTE_ORDER == __LITTLE_ENDIAN +#define cpu_to_le16(x) (x) +#define cpu_to_le32(x) (x) +#else +#define cpu_to_le16(x) ((((x) >> 8) & 0xffu) | (((x) & 0xffu) << 8)) +#define cpu_to_le32(x) \ + ((((x) & 0xff000000u) >> 24) | (((x) & 0x00ff0000u) >> 8) | \ + (((x) & 0x0000ff00u) << 8) | (((x) & 0x000000ffu) << 24)) +#endif + #define le32_to_cpu(x) le32toh(x) #define le16_to_cpu(x) le16toh(x) - /******************** Messages and Errors ***********************************/ static const char argv0[] = "ffs-test"; diff --git a/tools/virtio/asm/barrier.h b/tools/virtio/asm/barrier.h index 0ac3caf90877..d0351f83aebe 100644 --- a/tools/virtio/asm/barrier.h +++ b/tools/virtio/asm/barrier.h @@ -13,8 +13,8 @@ } while (0); /* Weak barriers should be used. If not - it's a bug */ # define mb() abort() -# define rmb() abort() -# define wmb() abort() +# define dma_rmb() abort() +# define dma_wmb() abort() #else #error Please fill in barrier macros #endif diff --git a/tools/virtio/linux/kernel.h b/tools/virtio/linux/kernel.h index fca8381bbe04..fb22bccfbc8a 100644 --- a/tools/virtio/linux/kernel.h +++ b/tools/virtio/linux/kernel.h @@ -52,6 +52,11 @@ static inline void *kmalloc(size_t s, gfp_t gfp) return __kmalloc_fake; return malloc(s); } +static inline void *kmalloc_array(unsigned n, size_t s, gfp_t gfp) +{ + return kmalloc(n * s, gfp); +} + static inline void *kzalloc(size_t s, gfp_t gfp) { void *p = kmalloc(s, gfp); |