diff options
Diffstat (limited to 'tools/testing/selftests/net')
| -rwxr-xr-x | tools/testing/selftests/net/pmtu.sh | 96 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/udpgro.sh | 8 | ||||
| -rw-r--r-- | tools/testing/selftests/net/udpgso_bench_rx.c | 42 |
3 files changed, 113 insertions, 33 deletions
diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh index e2c94e47707c..912b2dc50be3 100755 --- a/tools/testing/selftests/net/pmtu.sh +++ b/tools/testing/selftests/net/pmtu.sh @@ -103,6 +103,15 @@ # and check that configured MTU is used on link creation and changes, and # that MTU is properly calculated instead when MTU is not configured from # userspace +# +# - cleanup_ipv4_exception +# Similar to pmtu_ipv4_vxlan4_exception, but explicitly generate PMTU +# exceptions on multiple CPUs and check that the veth device tear-down +# happens in a timely manner +# +# - cleanup_ipv6_exception +# Same as above, but use IPv6 transport from A to B + # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -135,7 +144,9 @@ tests=" pmtu_vti6_default_mtu vti6: default MTU assignment pmtu_vti4_link_add_mtu vti4: MTU setting on link creation pmtu_vti6_link_add_mtu vti6: MTU setting on link creation - pmtu_vti6_link_change_mtu vti6: MTU changes on link changes" + pmtu_vti6_link_change_mtu vti6: MTU changes on link changes + cleanup_ipv4_exception ipv4: cleanup of cached exceptions + cleanup_ipv6_exception ipv6: cleanup of cached exceptions" NS_A="ns-$(mktemp -u XXXXXX)" NS_B="ns-$(mktemp -u XXXXXX)" @@ -263,8 +274,6 @@ setup_fou_or_gue() { ${ns_a} ip link set ${encap}_a up ${ns_b} ip link set ${encap}_b up - - sleep 1 } setup_fou44() { @@ -302,6 +311,10 @@ setup_gue66() { setup_namespaces() { for n in ${NS_A} ${NS_B} ${NS_R1} ${NS_R2}; do ip netns add ${n} || return 1 + + # Disable DAD, so that we don't have to wait to use the + # configured IPv6 addresses + ip netns exec ${n} sysctl -q net/ipv6/conf/default/accept_dad=0 done } @@ -337,8 +350,6 @@ setup_vti() { ${ns_a} ip link set vti${proto}_a up ${ns_b} ip link set vti${proto}_b up - - sleep 1 } setup_vti4() { @@ -375,8 +386,6 @@ setup_vxlan_or_geneve() { ${ns_a} ip link set ${type}_a up ${ns_b} ip link set ${type}_b up - - sleep 1 } setup_geneve4() { @@ -588,8 +597,8 @@ test_pmtu_ipvX() { mtu "${ns_b}" veth_B-R2 1500 # Create route exceptions - ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1800 ${dst1} > /dev/null - ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1800 ${dst2} > /dev/null + ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1} > /dev/null + ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2} > /dev/null # Check that exceptions have been created with the correct PMTU pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})" @@ -621,7 +630,7 @@ test_pmtu_ipvX() { # Decrease remote MTU on path via R2, get new exception mtu "${ns_r2}" veth_R2-B 400 mtu "${ns_b}" veth_B-R2 400 - ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1400 ${dst2} > /dev/null + ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} > /dev/null pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1 @@ -638,7 +647,7 @@ test_pmtu_ipvX() { check_pmtu_value "1500" "${pmtu_2}" "increasing local MTU" || return 1 # Get new exception - ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1400 ${dst2} > /dev/null + ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} > /dev/null pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1 } @@ -687,7 +696,7 @@ test_pmtu_ipvX_over_vxlanY_or_geneveY_exception() { mtu "${ns_a}" ${type}_a $((${ll_mtu} + 1000)) mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) - ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s $((${ll_mtu} + 500)) ${dst} > /dev/null + ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} > /dev/null # Check that exception was created pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})" @@ -767,7 +776,7 @@ test_pmtu_ipvX_over_fouY_or_gueY() { mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000)) mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000)) - ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s $((${ll_mtu} + 500)) ${dst} > /dev/null + ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} > /dev/null # Check that exception was created pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})" @@ -825,13 +834,13 @@ test_pmtu_vti4_exception() { # Send DF packet without exceeding link layer MTU, check that no # exception is created - ${ns_a} ping -q -M want -i 0.1 -w 2 -s ${ping_payload} ${tunnel4_b_addr} > /dev/null + ${ns_a} ping -q -M want -i 0.1 -w 1 -s ${ping_payload} ${tunnel4_b_addr} > /dev/null pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})" check_pmtu_value "" "${pmtu}" "sending packet smaller than PMTU (IP payload length ${esp_payload_rfc4106})" || return 1 # Now exceed link layer MTU by one byte, check that exception is created # with the right PMTU value - ${ns_a} ping -q -M want -i 0.1 -w 2 -s $((ping_payload + 1)) ${tunnel4_b_addr} > /dev/null + ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((ping_payload + 1)) ${tunnel4_b_addr} > /dev/null pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})" check_pmtu_value "${esp_payload_rfc4106}" "${pmtu}" "exceeding PMTU (IP payload length $((esp_payload_rfc4106 + 1)))" } @@ -847,7 +856,7 @@ test_pmtu_vti6_exception() { mtu "${ns_b}" veth_b 4000 mtu "${ns_a}" vti6_a 5000 mtu "${ns_b}" vti6_b 5000 - ${ns_a} ${ping6} -q -i 0.1 -w 2 -s 60000 ${tunnel6_b_addr} > /dev/null + ${ns_a} ${ping6} -q -i 0.1 -w 1 -s 60000 ${tunnel6_b_addr} > /dev/null # Check that exception was created pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})" @@ -1008,6 +1017,61 @@ test_pmtu_vti6_link_change_mtu() { return ${fail} } +check_command() { + cmd=${1} + + if ! which ${cmd} > /dev/null 2>&1; then + err " missing required command: '${cmd}'" + return 1 + fi + return 0 +} + +test_cleanup_vxlanX_exception() { + outer="${1}" + encap="vxlan" + ll_mtu=4000 + + check_command taskset || return 2 + cpu_list=$(grep -m 2 processor /proc/cpuinfo | cut -d ' ' -f 2) + + setup namespaces routing ${encap}${outer} || return 2 + trace "${ns_a}" ${encap}_a "${ns_b}" ${encap}_b \ + "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B + + # Create route exception by exceeding link layer MTU + mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000)) + mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000)) + mtu "${ns_b}" veth_B-R1 ${ll_mtu} + mtu "${ns_r1}" veth_R1-B ${ll_mtu} + + mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000)) + mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000)) + + # Fill exception cache for multiple CPUs (2) + # we can always use inner IPv4 for that + for cpu in ${cpu_list}; do + taskset --cpu-list ${cpu} ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${tunnel4_b_addr} > /dev/null + done + + ${ns_a} ip link del dev veth_A-R1 & + iplink_pid=$! + sleep 1 + if [ "$(cat /proc/${iplink_pid}/cmdline 2>/dev/null | tr -d '\0')" = "iplinkdeldevveth_A-R1" ]; then + err " can't delete veth device in a timely manner, PMTU dst likely leaked" + return 1 + fi +} + +test_cleanup_ipv6_exception() { + test_cleanup_vxlanX_exception 6 +} + +test_cleanup_ipv4_exception() { + test_cleanup_vxlanX_exception 4 +} + usage() { echo echo "$0 [OPTIONS] [TEST]..." diff --git a/tools/testing/selftests/net/udpgro.sh b/tools/testing/selftests/net/udpgro.sh index aeac53a99aeb..ac2a30be9b32 100755 --- a/tools/testing/selftests/net/udpgro.sh +++ b/tools/testing/selftests/net/udpgro.sh @@ -37,7 +37,7 @@ run_one() { cfg_veth - ip netns exec "${PEER_NS}" ./udpgso_bench_rx ${rx_args} && \ + ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${rx_args} && \ echo "ok" || \ echo "failed" & @@ -81,7 +81,7 @@ run_one_nat() { # will land on the 'plain' one ip netns exec "${PEER_NS}" ./udpgso_bench_rx -G ${family} -b ${addr1} -n 0 & pid=$! - ip netns exec "${PEER_NS}" ./udpgso_bench_rx ${family} -b ${addr2%/*} ${rx_args} && \ + ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${family} -b ${addr2%/*} ${rx_args} && \ echo "ok" || \ echo "failed"& @@ -99,8 +99,8 @@ run_one_2sock() { cfg_veth - ip netns exec "${PEER_NS}" ./udpgso_bench_rx ${rx_args} -p 12345 & - ip netns exec "${PEER_NS}" ./udpgso_bench_rx ${rx_args} && \ + ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${rx_args} -p 12345 & + ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 2000 -R 10 ${rx_args} && \ echo "ok" || \ echo "failed" & diff --git a/tools/testing/selftests/net/udpgso_bench_rx.c b/tools/testing/selftests/net/udpgso_bench_rx.c index 0c960f673324..db3d4a8b5a4c 100644 --- a/tools/testing/selftests/net/udpgso_bench_rx.c +++ b/tools/testing/selftests/net/udpgso_bench_rx.c @@ -45,6 +45,8 @@ static int cfg_alen = sizeof(struct sockaddr_in6); static int cfg_expected_pkt_nr; static int cfg_expected_pkt_len; static int cfg_expected_gso_size; +static int cfg_connect_timeout_ms; +static int cfg_rcv_timeout_ms; static struct sockaddr_storage cfg_bind_addr; static bool interrupted; @@ -87,7 +89,7 @@ static unsigned long gettimeofday_ms(void) return (tv.tv_sec * 1000) + (tv.tv_usec / 1000); } -static void do_poll(int fd) +static void do_poll(int fd, int timeout_ms) { struct pollfd pfd; int ret; @@ -102,8 +104,16 @@ static void do_poll(int fd) break; if (ret == -1) error(1, errno, "poll"); - if (ret == 0) - continue; + if (ret == 0) { + if (!timeout_ms) + continue; + + timeout_ms -= 10; + if (timeout_ms <= 0) { + interrupted = true; + break; + } + } if (pfd.revents != POLLIN) error(1, errno, "poll: 0x%x expected 0x%x\n", pfd.revents, POLLIN); @@ -134,7 +144,7 @@ static int do_socket(bool do_tcp) if (listen(accept_fd, 1)) error(1, errno, "listen"); - do_poll(accept_fd); + do_poll(accept_fd, cfg_connect_timeout_ms); if (interrupted) exit(0); @@ -273,7 +283,9 @@ static void do_flush_udp(int fd) static void usage(const char *filepath) { - error(1, 0, "Usage: %s [-Grtv] [-b addr] [-p port] [-l pktlen] [-n packetnr] [-S gsosize]", filepath); + error(1, 0, "Usage: %s [-C connect_timeout] [-Grtv] [-b addr] [-p port]" + " [-l pktlen] [-n packetnr] [-R rcv_timeout] [-S gsosize]", + filepath); } static void parse_opts(int argc, char **argv) @@ -282,7 +294,7 @@ static void parse_opts(int argc, char **argv) /* bind to any by default */ setup_sockaddr(PF_INET6, "::", &cfg_bind_addr); - while ((c = getopt(argc, argv, "4b:Gl:n:p:rS:tv")) != -1) { + while ((c = getopt(argc, argv, "4b:C:Gl:n:p:rR:S:tv")) != -1) { switch (c) { case '4': cfg_family = PF_INET; @@ -292,6 +304,9 @@ static void parse_opts(int argc, char **argv) case 'b': setup_sockaddr(cfg_family, optarg, &cfg_bind_addr); break; + case 'C': + cfg_connect_timeout_ms = strtoul(optarg, NULL, 0); + break; case 'G': cfg_gro_segment = true; break; @@ -307,6 +322,9 @@ static void parse_opts(int argc, char **argv) case 'r': cfg_read_all = true; break; + case 'R': + cfg_rcv_timeout_ms = strtoul(optarg, NULL, 0); + break; case 'S': cfg_expected_gso_size = strtol(optarg, NULL, 0); break; @@ -329,8 +347,9 @@ static void parse_opts(int argc, char **argv) static void do_recv(void) { + int timeout_ms = cfg_tcp ? cfg_rcv_timeout_ms : cfg_connect_timeout_ms; unsigned long tnow, treport; - int fd, loop = 0; + int fd; fd = do_socket(cfg_tcp); @@ -342,12 +361,7 @@ static void do_recv(void) treport = gettimeofday_ms() + 1000; do { - /* force termination after the second poll(); this cope both - * with sender slower than receiver and missing packet errors - */ - if (cfg_expected_pkt_nr && loop++) - interrupted = true; - do_poll(fd); + do_poll(fd, timeout_ms); if (cfg_tcp) do_flush_tcp(fd); @@ -365,6 +379,8 @@ static void do_recv(void) treport = tnow + 1000; } + timeout_ms = cfg_rcv_timeout_ms; + } while (!interrupted); if (cfg_expected_pkt_nr && (packets != cfg_expected_pkt_nr)) |