diff options
Diffstat (limited to 'tools/perf')
84 files changed, 6461 insertions, 1373 deletions
diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore index 20b8ab984d5f..4b9c71faa01a 100644 --- a/tools/perf/.gitignore +++ b/tools/perf/.gitignore @@ -19,7 +19,6 @@ perf.data perf.data.old output.svg perf-archive -perf-with-kcore perf-iostat tags TAGS diff --git a/tools/perf/Documentation/perf-arm-spe.txt b/tools/perf/Documentation/perf-arm-spe.txt new file mode 100644 index 000000000000..bf03222e9a68 --- /dev/null +++ b/tools/perf/Documentation/perf-arm-spe.txt @@ -0,0 +1,218 @@ +perf-arm-spe(1) +================ + +NAME +---- +perf-arm-spe - Support for Arm Statistical Profiling Extension within Perf tools + +SYNOPSIS +-------- +[verse] +'perf record' -e arm_spe// + +DESCRIPTION +----------- + +The SPE (Statistical Profiling Extension) feature provides accurate attribution of latencies and + events down to individual instructions. Rather than being interrupt-driven, it picks an +instruction to sample and then captures data for it during execution. Data includes execution time +in cycles. For loads and stores it also includes data address, cache miss events, and data origin. + +The sampling has 5 stages: + + 1. Choose an operation + 2. Collect data about the operation + 3. Optionally discard the record based on a filter + 4. Write the record to memory + 5. Interrupt when the buffer is full + +Choose an operation +~~~~~~~~~~~~~~~~~~~ + +This is chosen from a sample population, for SPE this is an IMPLEMENTATION DEFINED choice of all +architectural instructions or all micro-ops. Sampling happens at a programmable interval. The +architecture provides a mechanism for the SPE driver to infer the minimum interval at which it should +sample. This minimum interval is used by the driver if no interval is specified. A pseudo-random +perturbation is also added to the sampling interval by default. + +Collect data about the operation +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Program counter, PMU events, timings and data addresses related to the operation are recorded. +Sampling ensures there is only one sampled operation is in flight. + +Optionally discard the record based on a filter +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Based on programmable criteria, choose whether to keep the record or discard it. If the record is +discarded then the flow stops here for this sample. + +Write the record to memory +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The record is appended to a memory buffer + +Interrupt when the buffer is full +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +When the buffer fills, an interrupt is sent and the driver signals Perf to collect the records. +Perf saves the raw data in the perf.data file. + +Opening the file +---------------- + +Up until this point no decoding of the SPE data was done by either the kernel or Perf. Only when the +recorded file is opened with 'perf report' or 'perf script' does the decoding happen. When decoding +the data, Perf generates "synthetic samples" as if these were generated at the time of the +recording. These samples are the same as if normal sampling was done by Perf without using SPE, +although they may have more attributes associated with them. For example a normal sample may have +just the instruction pointer, but an SPE sample can have data addresses and latency attributes. + +Why Sampling? +------------- + + - Sampling, rather than tracing, cuts down the profiling problem to something more manageable for + hardware. Only one sampled operation is in flight at a time. + + - Allows precise attribution data, including: Full PC of instruction, data virtual and physical + addresses. + + - Allows correlation between an instruction and events, such as TLB and cache miss. (Data source + indicates which particular cache was hit, but the meaning is implementation defined because + different implementations can have different cache configurations.) + +However, SPE does not provide any call-graph information, and relies on statistical methods. + +Collisions +---------- + +When an operation is sampled while a previous sampled operation has not finished, a collision +occurs. The new sample is dropped. Collisions affect the integrity of the data, so the sample rate +should be set to avoid collisions. + +The 'sample_collision' PMU event can be used to determine the number of lost samples. Although this +count is based on collisions _before_ filtering occurs. Therefore this can not be used as an exact +number for samples dropped that would have made it through the filter, but can be a rough +guide. + +The effect of microarchitectural sampling +----------------------------------------- + +If an implementation samples micro-operations instead of instructions, the results of sampling must +be weighted accordingly. + +For example, if a given instruction A is always converted into two micro-operations, A0 and A1, it +becomes twice as likely to appear in the sample population. + +The coarse effect of conversions, and, if applicable, sampling of speculative operations, can be +estimated from the 'sample_pop' and 'inst_retired' PMU events. + +Kernel Requirements +------------------- + +The ARM_SPE_PMU config must be set to build as either a module or statically. + +Depending on CPU model, the kernel may need to be booted with page table isolation disabled +(kpti=off). If KPTI needs to be disabled, this will fail with a console message "profiling buffer +inaccessible. Try passing 'kpti=off' on the kernel command line". + +Capturing SPE with perf command-line tools +------------------------------------------ + +You can record a session with SPE samples: + + perf record -e arm_spe// -- ./mybench + +The sample period is set from the -c option, and because the minimum interval is used by default +it's recommended to set this to a higher value. The value is written to PMSIRR.INTERVAL. + +Config parameters +~~~~~~~~~~~~~~~~~ + +These are placed between the // in the event and comma separated. For example '-e +arm_spe/load_filter=1,min_latency=10/' + + branch_filter=1 - collect branches only (PMSFCR.B) + event_filter=<mask> - filter on specific events (PMSEVFR) - see bitfield description below + jitter=1 - use jitter to avoid resonance when sampling (PMSIRR.RND) + load_filter=1 - collect loads only (PMSFCR.LD) + min_latency=<n> - collect only samples with this latency or higher* (PMSLATFR) + pa_enable=1 - collect physical address (as well as VA) of loads/stores (PMSCR.PA) - requires privilege + pct_enable=1 - collect physical timestamp instead of virtual timestamp (PMSCR.PCT) - requires privilege + store_filter=1 - collect stores only (PMSFCR.ST) + ts_enable=1 - enable timestamping with value of generic timer (PMSCR.TS) + ++++*+++ Latency is the total latency from the point at which sampling started on that instruction, rather +than only the execution latency. + +Only some events can be filtered on; these include: + + bit 1 - instruction retired (i.e. omit speculative instructions) + bit 3 - L1D refill + bit 5 - TLB refill + bit 7 - mispredict + bit 11 - misaligned access + +So to sample just retired instructions: + + perf record -e arm_spe/event_filter=2/ -- ./mybench + +or just mispredicted branches: + + perf record -e arm_spe/event_filter=0x80/ -- ./mybench + +Viewing the data +~~~~~~~~~~~~~~~~~ + +By default perf report and perf script will assign samples to separate groups depending on the +attributes/events of the SPE record. Because instructions can have multiple events associated with +them, the samples in these groups are not necessarily unique. For example perf report shows these +groups: + + Available samples + 0 arm_spe// + 0 dummy:u + 21 l1d-miss + 897 l1d-access + 5 llc-miss + 7 llc-access + 2 tlb-miss + 1K tlb-access + 36 branch-miss + 0 remote-access + 900 memory + +The arm_spe// and dummy:u events are implementation details and are expected to be empty. + +To get a full list of unique samples that are not sorted into groups, set the itrace option to +generate 'instruction' samples. The period option is also taken into account, so set it to 1 +instruction unless you want to further downsample the already sampled SPE data: + + perf report --itrace=i1i + +Memory access details are also stored on the samples and this can be viewed with: + + perf report --mem-mode + +Common errors +~~~~~~~~~~~~~ + + - "Cannot find PMU `arm_spe'. Missing kernel support?" + + Module not built or loaded, KPTI not disabled (see above), or running on a VM + + - "Arm SPE CONTEXT packets not found in the traces." + + Root privilege is required to collect context packets. But these only increase the accuracy of + assigning PIDs to kernel samples. For userspace sampling this can be ignored. + + - Excessively large perf.data file size + + Increase sampling interval (see above) + + +SEE ALSO +-------- + +linkperf:perf-record[1], linkperf:perf-script[1], linkperf:perf-report[1], +linkperf:perf-inject[1] diff --git a/tools/perf/Documentation/perf-intel-pt.txt b/tools/perf/Documentation/perf-intel-pt.txt index ff58bd4c381b..92532d0d3618 100644 --- a/tools/perf/Documentation/perf-intel-pt.txt +++ b/tools/perf/Documentation/perf-intel-pt.txt @@ -1471,6 +1471,13 @@ In that case the --itrace q option is forced because walking executable code to reconstruct the control flow is not possible. +EXAMPLE +------- + +Examples can be found on perf wiki page "Perf tools support for Intel® Processor Trace": + +https://perf.wiki.kernel.org/index.php/Perf_tools_support_for_Intel%C2%AE_Processor_Trace + SEE ALSO -------- diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt index c06c341e72b9..8d1cde00b8d6 100644 --- a/tools/perf/Documentation/perf-stat.txt +++ b/tools/perf/Documentation/perf-stat.txt @@ -454,6 +454,16 @@ Multiple events are created from a single event specification when: 2. Aliases, which are listed immediately after the Kernel PMU events by perf list, are used. +--hybrid-merge:: +Merge the hybrid event counts from all PMUs. + +For hybrid events, by default, the stat aggregates and reports the event +counts per PMU. But sometimes, it's also useful to aggregate event counts +from all PMUs. This option enables that behavior and reports the counts +without PMUs. + +For non-hybrid events, it should be no effect. + --smi-cost:: Measure SMI cost if msr/aperf/ and msr/smi/ events are supported. diff --git a/tools/perf/Documentation/perf.txt b/tools/perf/Documentation/perf.txt index 71ebdf8125de..ba3df49c169d 100644 --- a/tools/perf/Documentation/perf.txt +++ b/tools/perf/Documentation/perf.txt @@ -77,7 +77,7 @@ linkperf:perf-stat[1], linkperf:perf-top[1], linkperf:perf-record[1], linkperf:perf-report[1], linkperf:perf-list[1] -linkperf:perf-annotate[1],linkperf:perf-archive[1], +linkperf:perf-annotate[1],linkperf:perf-archive[1],linkperf:perf-arm-spe[1], linkperf:perf-bench[1], linkperf:perf-buildid-cache[1], linkperf:perf-buildid-list[1], linkperf:perf-c2c[1], linkperf:perf-config[1], linkperf:perf-data[1], linkperf:perf-diff[1], diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf index 69473a836bae..6e5aded855cc 100644 --- a/tools/perf/Makefile.perf +++ b/tools/perf/Makefile.perf @@ -286,7 +286,6 @@ PYRF_OBJS = SCRIPT_SH = SCRIPT_SH += perf-archive.sh -SCRIPT_SH += perf-with-kcore.sh SCRIPT_SH += perf-iostat.sh grep-libs = $(filter -l%,$(1)) @@ -973,8 +972,6 @@ ifndef NO_LIBBPF endif $(call QUIET_INSTALL, perf-archive) \ $(INSTALL) $(OUTPUT)perf-archive -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' - $(call QUIET_INSTALL, perf-with-kcore) \ - $(INSTALL) $(OUTPUT)perf-with-kcore -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' $(call QUIET_INSTALL, perf-iostat) \ $(INSTALL) $(OUTPUT)perf-iostat -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' ifndef NO_LIBAUDIT @@ -1088,7 +1085,7 @@ bpf-skel-clean: $(call QUIET_CLEAN, bpf-skel) $(RM) -r $(SKEL_TMP_OUT) $(SKELETONS) clean:: $(LIBTRACEEVENT)-clean $(LIBAPI)-clean $(LIBBPF)-clean $(LIBSUBCMD)-clean $(LIBPERF)-clean fixdep-clean python-clean bpf-skel-clean - $(call QUIET_CLEAN, core-objs) $(RM) $(LIBPERF_A) $(OUTPUT)perf-archive $(OUTPUT)perf-with-kcore $(OUTPUT)perf-iostat $(LANG_BINDINGS) + $(call QUIET_CLEAN, core-objs) $(RM) $(LIBPERF_A) $(OUTPUT)perf-archive $(OUTPUT)perf-iostat $(LANG_BINDINGS) $(Q)find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete $(Q)$(RM) $(OUTPUT).config-detected $(call QUIET_CLEAN, core-progs) $(RM) $(ALL_PROGRAMS) perf perf-read-vdso32 perf-read-vdsox32 $(OUTPUT)pmu-events/jevents $(OUTPUT)$(LIBJVMTI).so diff --git a/tools/perf/arch/riscv/Makefile b/tools/perf/arch/riscv/Makefile index 1aa9dd772489..a8d25d005207 100644 --- a/tools/perf/arch/riscv/Makefile +++ b/tools/perf/arch/riscv/Makefile @@ -2,3 +2,4 @@ ifndef NO_DWARF PERF_HAVE_DWARF_REGS := 1 endif PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET := 1 +PERF_HAVE_JITDUMP := 1 diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index a96f106dc93a..1b96636df01e 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -216,6 +216,7 @@ static struct perf_stat_config stat_config = { .run_count = 1, .metric_only_len = METRIC_ONLY_LEN, .walltime_nsecs_stats = &walltime_nsecs_stats, + .ru_stats = &ru_stats, .big_num = true, .ctl_fd = -1, .ctl_fd_ack = -1, @@ -341,15 +342,35 @@ static int evsel__write_stat_event(struct evsel *counter, int cpu_map_idx, u32 t static int read_single_counter(struct evsel *counter, int cpu_map_idx, int thread, struct timespec *rs) { - if (counter->tool_event == PERF_TOOL_DURATION_TIME) { - u64 val = rs->tv_nsec + rs->tv_sec*1000000000ULL; - struct perf_counts_values *count = - perf_counts(counter->counts, cpu_map_idx, thread); - count->ena = count->run = val; - count->val = val; - return 0; + switch(counter->tool_event) { + case PERF_TOOL_DURATION_TIME: { + u64 val = rs->tv_nsec + rs->tv_sec*1000000000ULL; + struct perf_counts_values *count = + perf_counts(counter->counts, cpu_map_idx, thread); + count->ena = count->run = val; + count->val = val; + return 0; + } + case PERF_TOOL_USER_TIME: + case PERF_TOOL_SYSTEM_TIME: { + u64 val; + struct perf_counts_values *count = + perf_counts(counter->counts, cpu_map_idx, thread); + if (counter->tool_event == PERF_TOOL_USER_TIME) + val = ru_stats.ru_utime_usec_stat.mean; + else + val = ru_stats.ru_stime_usec_stat.mean; + count->ena = count->run = val; + count->val = val; + return 0; + } + default: + case PERF_TOOL_NONE: + return evsel__read_counter(counter, cpu_map_idx, thread); + case PERF_TOOL_MAX: + /* This should never be reached */ + return 0; } - return evsel__read_counter(counter, cpu_map_idx, thread); } /* @@ -1010,8 +1031,10 @@ try_again_reset: evlist__reset_prev_raw_counts(evsel_list); runtime_stat_reset(&stat_config); perf_stat__reset_shadow_per_stat(&rt_stat); - } else + } else { update_stats(&walltime_nsecs_stats, t1 - t0); + update_rusage_stats(&ru_stats, &stat_config.ru_data); + } /* * Closing a group leader splits the group, and as we only disable @@ -1235,6 +1258,8 @@ static struct option stat_options[] = { OPT_SET_UINT('A', "no-aggr", &stat_config.aggr_mode, "disable CPU count aggregation", AGGR_NONE), OPT_BOOLEAN(0, "no-merge", &stat_config.no_merge, "Do not merge identical named events"), + OPT_BOOLEAN(0, "hybrid-merge", &stat_config.hybrid_merge, + "Merge identical named hybrid events"), OPT_STRING('x', "field-separator", &stat_config.csv_sep, "separator", "print counts with custom separator"), OPT_CALLBACK('G', "cgroup", &evsel_list, "name", @@ -1842,11 +1867,23 @@ static int add_default_attributes(void) unsigned int max_level = 1; char *str = NULL; bool warn = false; + const char *pmu_name = "cpu"; if (!force_metric_only) stat_config.metric_only = true; - if (pmu_have_event("cpu", topdown_metric_L2_attrs[5])) { + if (perf_pmu__has_hybrid()) { + if (!evsel_list->hybrid_pmu_name) { + pr_warning("WARNING: default to use cpu_core topdown events\n"); + evsel_list->hybrid_pmu_name = perf_pmu__hybrid_type_to_pmu("core"); + } + + pmu_name = evsel_list->hybrid_pmu_name; + if (!pmu_name) + return -1; + } + + if (pmu_have_event(pmu_name, topdown_metric_L2_attrs[5])) { metric_attrs = topdown_metric_L2_attrs; max_level = 2; } @@ -1857,10 +1894,11 @@ static int add_default_attributes(void) } else if (!stat_config.topdown_level) stat_config.topdown_level = max_level; - if (topdown_filter_events(metric_attrs, &str, 1) < 0) { + if (topdown_filter_events(metric_attrs, &str, 1, pmu_name) < 0) { pr_err("Out of memory\n"); return -1; } + if (metric_attrs[0] && str) { if (!stat_config.interval && !stat_config.metric_only) { fprintf(stat_config.output, @@ -1884,10 +1922,12 @@ static int add_default_attributes(void) } if (topdown_filter_events(topdown_attrs, &str, - arch_topdown_check_group(&warn)) < 0) { + arch_topdown_check_group(&warn), + pmu_name) < 0) { pr_err("Out of memory\n"); return -1; } + if (topdown_attrs[0] && str) { struct parse_events_error errinfo; if (warn) diff --git a/tools/perf/builtin-version.c b/tools/perf/builtin-version.c index 9cd074a3d825..a71f491224da 100644 --- a/tools/perf/builtin-version.c +++ b/tools/perf/builtin-version.c @@ -65,6 +65,7 @@ static void library_status(void) #endif STATUS(HAVE_SYSCALL_TABLE_SUPPORT, syscall_table); STATUS(HAVE_LIBBFD_SUPPORT, libbfd); + STATUS(HAVE_DEBUGINFOD_SUPPORT, debuginfod); STATUS(HAVE_LIBELF_SUPPORT, libelf); STATUS(HAVE_LIBNUMA_SUPPORT, libnuma); STATUS(HAVE_LIBNUMA_SUPPORT, numa_num_possible_cpus); diff --git a/tools/perf/perf-with-kcore.sh b/tools/perf/perf-with-kcore.sh deleted file mode 100644 index 0b96545c8184..000000000000 --- a/tools/perf/perf-with-kcore.sh +++ /dev/null @@ -1,247 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0-only -# perf-with-kcore: use perf with a copy of kcore -# Copyright (c) 2014, Intel Corporation. -# - -set -e - -usage() -{ - echo "Usage: perf-with-kcore <perf sub-command> <perf.data directory> [<sub-command options> [ -- <workload>]]" >&2 - echo " <perf sub-command> can be record, script, report or inject" >&2 - echo " or: perf-with-kcore fix_buildid_cache_permissions" >&2 - exit 1 -} - -find_perf() -{ - if [ -n "$PERF" ] ; then - return - fi - PERF=`which perf || true` - if [ -z "$PERF" ] ; then - echo "Failed to find perf" >&2 - exit 1 - fi - if [ ! -x "$PERF" ] ; then - echo "Failed to find perf" >&2 - exit 1 - fi - echo "Using $PERF" - "$PERF" version -} - -copy_kcore() -{ - echo "Copying kcore" - - if [ $EUID -eq 0 ] ; then - SUDO="" - else - SUDO="sudo" - fi - - rm -f perf.data.junk - ("$PERF" record -o perf.data.junk "${PERF_OPTIONS[@]}" -- sleep 60) >/dev/null 2>/dev/null & - PERF_PID=$! - - # Need to make sure that perf has started - sleep 1 - - KCORE=$(($SUDO "$PERF" buildid-cache -v -f -k /proc/kcore >/dev/null) 2>&1) - case "$KCORE" in - "kcore added to build-id cache directory "*) - KCORE_DIR=${KCORE#"kcore added to build-id cache directory "} - ;; - *) - kill $PERF_PID - wait >/dev/null 2>/dev/null || true - rm perf.data.junk - echo "$KCORE" - echo "Failed to find kcore" >&2 - exit 1 - ;; - esac - - kill $PERF_PID - wait >/dev/null 2>/dev/null || true - rm perf.data.junk - - $SUDO cp -a "$KCORE_DIR" "$(pwd)/$PERF_DATA_DIR" - $SUDO rm -f "$KCORE_DIR/kcore" - $SUDO rm -f "$KCORE_DIR/kallsyms" - $SUDO rm -f "$KCORE_DIR/modules" - $SUDO rmdir "$KCORE_DIR" - - KCORE_DIR_BASENAME=$(basename "$KCORE_DIR") - KCORE_DIR="$(pwd)/$PERF_DATA_DIR/$KCORE_DIR_BASENAME" - - $SUDO chown $UID "$KCORE_DIR" - $SUDO chown $UID "$KCORE_DIR/kcore" - $SUDO chown $UID "$KCORE_DIR/kallsyms" - $SUDO chown $UID "$KCORE_DIR/modules" - - $SUDO chgrp $GROUPS "$KCORE_DIR" - $SUDO chgrp $GROUPS "$KCORE_DIR/kcore" - $SUDO chgrp $GROUPS "$KCORE_DIR/kallsyms" - $SUDO chgrp $GROUPS "$KCORE_DIR/modules" - - ln -s "$KCORE_DIR_BASENAME" "$PERF_DATA_DIR/kcore_dir" -} - -fix_buildid_cache_permissions() -{ - if [ $EUID -ne 0 ] ; then - echo "This script must be run as root via sudo " >&2 - exit 1 - fi - - if [ -z "$SUDO_USER" ] ; then - echo "This script must be run via sudo" >&2 - exit 1 - fi - - USER_HOME=$(bash <<< "echo ~$SUDO_USER") - - echo "Fixing buildid cache permissions" - - find "$USER_HOME/.debug" -xdev -type d ! -user "$SUDO_USER" -ls -exec chown "$SUDO_USER" \{\} \; - find "$USER_HOME/.debug" -xdev -type f -links 1 ! -user "$SUDO_USER" -ls -exec chown "$SUDO_USER" \{\} \; - find "$USER_HOME/.debug" -xdev -type l ! -user "$SUDO_USER" -ls -exec chown -h "$SUDO_USER" \{\} \; - - if [ -n "$SUDO_GID" ] ; then - find "$USER_HOME/.debug" -xdev -type d ! -group "$SUDO_GID" -ls -exec chgrp "$SUDO_GID" \{\} \; - find "$USER_HOME/.debug" -xdev -type f -links 1 ! -group "$SUDO_GID" -ls -exec chgrp "$SUDO_GID" \{\} \; - find "$USER_HOME/.debug" -xdev -type l ! -group "$SUDO_GID" -ls -exec chgrp -h "$SUDO_GID" \{\} \; - fi - - echo "Done" -} - -check_buildid_cache_permissions() -{ - if [ $EUID -eq 0 ] ; then - return - fi - - PERMISSIONS_OK+=$(find "$HOME/.debug" -xdev -type d ! -user "$USER" -print -quit) - PERMISSIONS_OK+=$(find "$HOME/.debug" -xdev -type f -links 1 ! -user "$USER" -print -quit) - PERMISSIONS_OK+=$(find "$HOME/.debug" -xdev -type l ! -user "$USER" -print -quit) - - PERMISSIONS_OK+=$(find "$HOME/.debug" -xdev -type d ! -group "$GROUPS" -print -quit) - PERMISSIONS_OK+=$(find "$HOME/.debug" -xdev -type f -links 1 ! -group "$GROUPS" -print -quit) - PERMISSIONS_OK+=$(find "$HOME/.debug" -xdev -type l ! -group "$GROUPS" -print -quit) - - if [ -n "$PERMISSIONS_OK" ] ; then - echo "*** WARNING *** buildid cache permissions may need fixing" >&2 - fi -} - -record() -{ - echo "Recording" - - if [ $EUID -ne 0 ] ; then - - if [ "$(cat /proc/sys/kernel/kptr_restrict)" -ne 0 ] ; then - echo "*** WARNING *** /proc/sys/kernel/kptr_restrict prevents access to kernel addresses" >&2 - fi - - if echo "${PERF_OPTIONS[@]}" | grep -q ' -a \|^-a \| -a$\|^-a$\| --all-cpus \|^--all-cpus \| --all-cpus$\|^--all-cpus$' ; then - echo "*** WARNING *** system-wide tracing without root access will not be able to read all necessary information from /proc" >&2 - fi - - if echo "${PERF_OPTIONS[@]}" | grep -q 'intel_pt\|intel_bts\| -I\|^-I' ; then - if [ "$(cat /proc/sys/kernel/perf_event_paranoid)" -gt -1 ] ; then - echo "*** WARNING *** /proc/sys/kernel/perf_event_paranoid restricts buffer size and tracepoint (sched_switch) use" >&2 - fi - - if echo "${PERF_OPTIONS[@]}" | grep -q ' --per-thread \|^--per-thread \| --per-thread$\|^--per-thread$' ; then - true - elif echo "${PERF_OPTIONS[@]}" | grep -q ' -t \|^-t \| -t$\|^-t$' ; then - true - elif [ ! -r /sys/kernel/debug -o ! -x /sys/kernel/debug ] ; then - echo "*** WARNING *** /sys/kernel/debug permissions prevent tracepoint (sched_switch) use" >&2 - fi - fi - fi - - if [ -z "$1" ] ; then - echo "Workload is required for recording" >&2 - usage - fi - - if [ -e "$PERF_DATA_DIR" ] ; then - echo "'$PERF_DATA_DIR' exists" >&2 - exit 1 - fi - - find_perf - - mkdir "$PERF_DATA_DIR" - - echo "$PERF record -o $PERF_DATA_DIR/perf.data ${PERF_OPTIONS[@]} -- $@" - "$PERF" record -o "$PERF_DATA_DIR/perf.data" "${PERF_OPTIONS[@]}" -- "$@" || true - - if rmdir "$PERF_DATA_DIR" > /dev/null 2>/dev/null ; then - exit 1 - fi - - copy_kcore - - echo "Done" -} - -subcommand() -{ - find_perf - check_buildid_cache_permissions - echo "$PERF $PERF_SUB_COMMAND -i $PERF_DATA_DIR/perf.data --kallsyms=$PERF_DATA_DIR/kcore_dir/kallsyms $@" - "$PERF" $PERF_SUB_COMMAND -i "$PERF_DATA_DIR/perf.data" "--kallsyms=$PERF_DATA_DIR/kcore_dir/kallsyms" "$@" -} - -if [ "$1" = "fix_buildid_cache_permissions" ] ; then - fix_buildid_cache_permissions - exit 0 -fi - -PERF_SUB_COMMAND=$1 -PERF_DATA_DIR=$2 -shift || true -shift || true - -if [ -z "$PERF_SUB_COMMAND" ] ; then - usage -fi - -if [ -z "$PERF_DATA_DIR" ] ; then - usage -fi - -case "$PERF_SUB_COMMAND" in -"record") - while [ "$1" != "--" ] ; do - PERF_OPTIONS+=("$1") - shift || break - done - if [ "$1" != "--" ] ; then - echo "Options and workload are required for recording" >&2 - usage - fi - shift - record "$@" -;; -"script") - subcommand "$@" -;; -"report") - subcommand "$@" -;; -"inject") - subcommand "$@" -;; -*) - usage -;; -esac diff --git a/tools/perf/pmu-events/arch/x86/alderlake/adl-metrics.json b/tools/perf/pmu-events/arch/x86/alderlake/adl-metrics.json new file mode 100644 index 000000000000..4d172687f936 --- /dev/null +++ b/tools/perf/pmu-events/arch/x86/alderlake/adl-metrics.json @@ -0,0 +1,761 @@ +[ + { + "BriefDescription": "Total pipeline cost of branch related instructions (used for program control-flow including function calls)", + "MetricExpr": "100 * (( BR_INST_RETIRED.COND + 3 * BR_INST_RETIRED.NEAR_CALL + (BR_INST_RETIRED.NEAR_TAKEN - BR_INST_RETIRED.COND_TAKEN - 2 * BR_INST_RETIRED.NEAR_CALL) ) / TOPDOWN.SLOTS)", + "MetricGroup": "Ret", + "MetricName": "Branching_Overhead", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions Per Cycle (per Logical Processor)", + "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD", + "MetricGroup": "Ret;Summary", + "MetricName": "IPC", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Cycles Per Instruction (per Logical Processor)", + "MetricExpr": "1 / (INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD)", + "MetricGroup": "Pipeline;Mem", + "MetricName": "CPI", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Per-Logical Processor actual clocks when the Logical Processor is active.", + "MetricExpr": "CPU_CLK_UNHALTED.THREAD", + "MetricGroup": "Pipeline", + "MetricName": "CLKS", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Total issue-pipeline slots (per-Physical Core till ICL; per-Logical Processor ICL onward)", + "MetricExpr": "TOPDOWN.SLOTS", + "MetricGroup": "TmaL1", + "MetricName": "SLOTS", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Fraction of Physical Core issue-slots utilized by this Logical Processor", + "MetricExpr": "TOPDOWN.SLOTS / ( TOPDOWN.SLOTS / 2 ) if #SMT_on else 1", + "MetricGroup": "SMT", + "MetricName": "Slots_Utilization", + "Unit": "cpu_core" + }, + { + "BriefDescription": "The ratio of Executed- by Issued-Uops", + "MetricExpr": "UOPS_EXECUTED.THREAD / UOPS_ISSUED.ANY", + "MetricGroup": "Cor;Pipeline", + "MetricName": "Execute_per_Issue", + "PublicDescription": "The ratio of Executed- by Issued-Uops. Ratio > 1 suggests high rate of uop micro-fusions. Ratio < 1 suggest high rate of \"execute\" at rename stage.", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions Per Cycle across hyper-threads (per physical core)", + "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.DISTRIBUTED", + "MetricGroup": "Ret;SMT;TmaL1", + "MetricName": "CoreIPC", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE ) / CPU_CLK_UNHALTED.DISTRIBUTED", + "MetricGroup": "Ret;Flops", + "MetricName": "FLOPc", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Actual per-core usage of the Floating Point execution units (regardless of the vector width)", + "MetricExpr": "( (FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE) + (FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE) ) / ( 2 * CPU_CLK_UNHALTED.DISTRIBUTED )", + "MetricGroup": "Cor;Flops;HPC", + "MetricName": "FP_Arith_Utilization", + "PublicDescription": "Actual per-core usage of the Floating Point execution units (regardless of the vector width). Values > 1 are possible due to Fused-Multiply Add (FMA) counting.", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)", + "MetricExpr": "UOPS_EXECUTED.THREAD / (( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2 ) if #SMT_on else UOPS_EXECUTED.CORE_CYCLES_GE_1)", + "MetricGroup": "Backend;Cor;Pipeline;PortsUtil", + "MetricName": "ILP", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)", + "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES", + "MetricGroup": "Bad;BadSpec;BrMispredicts", + "MetricName": "IpMispredict", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Core actual clocks when any Logical Processor is active on the Physical Core", + "MetricExpr": "CPU_CLK_UNHALTED.DISTRIBUTED", + "MetricGroup": "SMT", + "MetricName": "CORE_CLKS", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions per Load (lower number means higher occurrence rate)", + "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_LOADS", + "MetricGroup": "InsType", + "MetricName": "IpLoad", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions per Store (lower number means higher occurrence rate)", + "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_STORES", + "MetricGroup": "InsType", + "MetricName": "IpStore", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions per Branch (lower number means higher occurrence rate)", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES", + "MetricGroup": "Branches;Fed;InsType", + "MetricName": "IpBranch", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions per (near) call (lower number means higher occurrence rate)", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL", + "MetricGroup": "Branches;Fed;PGO", + "MetricName": "IpCall", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instruction per taken branch", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN", + "MetricGroup": "Branches;Fed;FetchBW;Frontend;PGO", + "MetricName": "IpTB", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Branch instructions per taken branch. ", + "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN", + "MetricGroup": "Branches;Fed;PGO", + "MetricName": "BpTkBranch", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions per Floating Point (FP) Operation (lower number means higher occurrence rate)", + "MetricExpr": "INST_RETIRED.ANY / ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )", + "MetricGroup": "Flops;InsType", + "MetricName": "IpFLOP", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions per FP Arithmetic instruction (lower number means higher occurrence rate)", + "MetricExpr": "INST_RETIRED.ANY / ( (FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE) + (FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE) )", + "MetricGroup": "Flops;InsType", + "MetricName": "IpArith", + "PublicDescription": "Instructions per FP Arithmetic instruction (lower number means higher occurrence rate). May undercount due to FMA double counting. Approximated prior to BDW.", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions per FP Arithmetic Scalar Single-Precision instruction (lower number means higher occurrence rate)", + "MetricExpr": "INST_RETIRED.ANY / FP_ARITH_INST_RETIRED.SCALAR_SINGLE", + "MetricGroup": "Flops;FpScalar;InsType", + "MetricName": "IpArith_Scalar_SP", + "PublicDescription": "Instructions per FP Arithmetic Scalar Single-Precision instruction (lower number means higher occurrence rate). May undercount due to FMA double counting.", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions per FP Arithmetic Scalar Double-Precision instruction (lower number means higher occurrence rate)", + "MetricExpr": "INST_RETIRED.ANY / FP_ARITH_INST_RETIRED.SCALAR_DOUBLE", + "MetricGroup": "Flops;FpScalar;InsType", + "MetricName": "IpArith_Scalar_DP", + "PublicDescription": "Instructions per FP Arithmetic Scalar Double-Precision instruction (lower number means higher occurrence rate). May undercount due to FMA double counting.", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions per FP Arithmetic AVX/SSE 128-bit instruction (lower number means higher occurrence rate)", + "MetricExpr": "INST_RETIRED.ANY / ( FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE )", + "MetricGroup": "Flops;FpVector;InsType", + "MetricName": "IpArith_AVX128", + "PublicDescription": "Instructions per FP Arithmetic AVX/SSE 128-bit instruction (lower number means higher occurrence rate). May undercount due to FMA double counting.", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions per FP Arithmetic AVX* 256-bit instruction (lower number means higher occurrence rate)", + "MetricExpr": "INST_RETIRED.ANY / ( FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )", + "MetricGroup": "Flops;FpVector;InsType", + "MetricName": "IpArith_AVX256", + "PublicDescription": "Instructions per FP Arithmetic AVX* 256-bit instruction (lower number means higher occurrence rate). May undercount due to FMA double counting.", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Total number of retired Instructions, Sample with: INST_RETIRED.PREC_DIST", + "MetricExpr": "INST_RETIRED.ANY", + "MetricGroup": "Summary;TmaL1", + "MetricName": "Instructions", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Average number of Uops issued by front-end when it issued something", + "MetricExpr": "UOPS_ISSUED.ANY / cpu_core@UOPS_ISSUED.ANY\\,cmask\\=1@", + "MetricGroup": "Fed;FetchBW", + "MetricName": "Fetch_UpC", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Fraction of Uops delivered by the LSD (Loop Stream Detector; aka Loop Cache)", + "MetricExpr": "LSD.UOPS / (IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS)", + "MetricGroup": "Fed;LSD", + "MetricName": "LSD_Coverage", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)", + "MetricExpr": "IDQ.DSB_UOPS / (IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS)", + "MetricGroup": "DSB;Fed;FetchBW", + "MetricName": "DSB_Coverage", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Number of Instructions per non-speculative DSB miss", + "MetricExpr": "INST_RETIRED.ANY / FRONTEND_RETIRED.ANY_DSB_MISS", + "MetricGroup": "DSBmiss;Fed", + "MetricName": "IpDSB_Miss_Ret", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Fraction of branches that are non-taken conditionals", + "MetricExpr": "BR_INST_RETIRED.COND_NTAKEN / BR_INST_RETIRED.ALL_BRANCHES", + "MetricGroup": "Bad;Branches;CodeGen;PGO", + "MetricName": "Cond_NT", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Fraction of branches that are taken conditionals", + "MetricExpr": "BR_INST_RETIRED.COND_TAKEN / BR_INST_RETIRED.ALL_BRANCHES", + "MetricGroup": "Bad;Branches;CodeGen;PGO", + "MetricName": "Cond_TK", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Fraction of branches that are CALL or RET", + "MetricExpr": "( BR_INST_RETIRED.NEAR_CALL + BR_INST_RETIRED.NEAR_RETURN ) / BR_INST_RETIRED.ALL_BRANCHES", + "MetricGroup": "Bad;Branches", + "MetricName": "CallRet", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Fraction of branches that are unconditional (direct or indirect) jumps", + "MetricExpr": "(BR_INST_RETIRED.NEAR_TAKEN - BR_INST_RETIRED.COND_TAKEN - 2 * BR_INST_RETIRED.NEAR_CALL) / BR_INST_RETIRED.ALL_BRANCHES", + "MetricGroup": "Bad;Branches", + "MetricName": "Jump", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Fraction of branches of other types (not individually covered by other metrics in Info.Branches group)", + "MetricExpr": "1 - ( (BR_INST_RETIRED.COND_NTAKEN / BR_INST_RETIRED.ALL_BRANCHES) + (BR_INST_RETIRED.COND_TAKEN / BR_INST_RETIRED.ALL_BRANCHES) + (( BR_INST_RETIRED.NEAR_CALL + BR_INST_RETIRED.NEAR_RETURN ) / BR_INST_RETIRED.ALL_BRANCHES) + ((BR_INST_RETIRED.NEAR_TAKEN - BR_INST_RETIRED.COND_TAKEN - 2 * BR_INST_RETIRED.NEAR_CALL) / BR_INST_RETIRED.ALL_BRANCHES) )", + "MetricGroup": "Bad;Branches", + "MetricName": "Other_Branches", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Actual Average Latency for L1 data-cache miss demand load instructions (in core cycles)", + "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )", + "MetricGroup": "Mem;MemoryBound;MemoryLat", + "MetricName": "Load_Miss_Real_Latency", + "PublicDescription": "Actual Average Latency for L1 data-cache miss demand load instructions (in core cycles). Latency may be overestimated for multi-load instructions - e.g. repeat strings.", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-Logical Processor)", + "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES", + "MetricGroup": "Mem;MemoryBound;MemoryBW", + "MetricName": "MLP", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]", + "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time", + "MetricGroup": "Mem;MemoryBW", + "MetricName": "L1D_Cache_Fill_BW", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]", + "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time", + "MetricGroup": "Mem;MemoryBW", + "MetricName": "L2_Cache_Fill_BW", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time", + "MetricGroup": "Mem;MemoryBW", + "MetricName": "L3_Cache_Fill_BW", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Average per-core data access bandwidth to the L3 cache [GB / sec]", + "MetricExpr": "64 * OFFCORE_REQUESTS.ALL_REQUESTS / 1000000000 / duration_time", + "MetricGroup": "Mem;MemoryBW;Offcore", + "MetricName": "L3_Cache_Access_BW", + "Unit": "cpu_core" + }, + { + "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads", + "MetricExpr": "1000 * MEM_LOAD_RETIRED.L1_MISS / INST_RETIRED.ANY", + "MetricGroup": "Mem;CacheMisses", + "MetricName": "L1MPKI", + "Unit": "cpu_core" + }, + { + "BriefDescription": "L1 cache true misses per kilo instruction for all demand loads (including speculative)", + "MetricExpr": "1000 * L2_RQSTS.ALL_DEMAND_DATA_RD / INST_RETIRED.ANY", + "MetricGroup": "Mem;CacheMisses", + "MetricName": "L1MPKI_Load", + "Unit": "cpu_core" + }, + { + "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads", + "MetricExpr": "1000 * MEM_LOAD_RETIRED.L2_MISS / INST_RETIRED.ANY", + "MetricGroup": "Mem;Backend;CacheMisses", + "MetricName": "L2MPKI", + "Unit": "cpu_core" + }, + { + "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)", + "MetricExpr": "1000 * L2_RQSTS.MISS / INST_RETIRED.ANY", + "MetricGroup": "Mem;CacheMisses;Offcore", + "MetricName": "L2MPKI_All", + "Unit": "cpu_core" + }, + { + "BriefDescription": "L2 cache misses per kilo instruction for all demand loads (including speculative)", + "MetricExpr": "1000 * L2_RQSTS.DEMAND_DATA_RD_MISS / INST_RETIRED.ANY", + "MetricGroup": "Mem;CacheMisses", + "MetricName": "L2MPKI_Load", + "Unit": "cpu_core" + }, + { + "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)", + "MetricExpr": "1000 * ( L2_RQSTS.REFERENCES - L2_RQSTS.MISS ) / INST_RETIRED.ANY", + "MetricGroup": "Mem;CacheMisses", + "MetricName": "L2HPKI_All", + "Unit": "cpu_core" + }, + { + "BriefDescription": "L2 cache hits per kilo instruction for all demand loads (including speculative)", + "MetricExpr": "1000 * L2_RQSTS.DEMAND_DATA_RD_HIT / INST_RETIRED.ANY", + "MetricGroup": "Mem;CacheMisses", + "MetricName": "L2HPKI_Load", + "Unit": "cpu_core" + }, + { + "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads", + "MetricExpr": "1000 * MEM_LOAD_RETIRED.L3_MISS / INST_RETIRED.ANY", + "MetricGroup": "Mem;CacheMisses", + "MetricName": "L3MPKI", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Fill Buffer (FB) true hits per kilo instructions for retired demand loads", + "MetricExpr": "1000 * MEM_LOAD_RETIRED.FB_HIT / INST_RETIRED.ANY", + "MetricGroup": "Mem;CacheMisses", + "MetricName": "FB_HPKI", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", + "MetricConstraint": "NO_NMI_WATCHDOG", + "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING ) / ( 4 * CPU_CLK_UNHALTED.DISTRIBUTED )", + "MetricGroup": "Mem;MemoryTLB", + "MetricName": "Page_Walks_Utilization", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Average CPU Utilization", + "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "MetricGroup": "HPC;Summary", + "MetricName": "CPU_Utilization", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Measured Average Frequency for unhalted processors [GHz]", + "MetricExpr": "(CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time", + "MetricGroup": "Summary;Power", + "MetricName": "Average_Frequency", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Giga Floating Point Operations Per Second", + "MetricExpr": "( ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE ) / 1000000000 ) / duration_time", + "MetricGroup": "Cor;Flops;HPC", + "MetricName": "GFLOPs", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Average Frequency Utilization relative nominal frequency", + "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC", + "MetricGroup": "Power", + "MetricName": "Turbo_Utilization", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Fraction of cycles where both hardware Logical Processors were active", + "MetricExpr": "1 - CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_DISTRIBUTED if #SMT_on else 0", + "MetricGroup": "SMT", + "MetricName": "SMT_2T_Utilization", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Fraction of cycles spent in the Operating System (OS) Kernel mode", + "MetricExpr": "CPU_CLK_UNHALTED.THREAD_P:k / CPU_CLK_UNHALTED.THREAD", + "MetricGroup": "OS", + "MetricName": "Kernel_Utilization", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Cycles Per Instruction for the Operating System (OS) Kernel mode", + "MetricExpr": "CPU_CLK_UNHALTED.THREAD_P:k / INST_RETIRED.ANY_P:k", + "MetricGroup": "OS", + "MetricName": "Kernel_CPI", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", + "MetricExpr": "64 * ( arb@event\\=0x81\\,umask\\=0x1@ + arb@event\\=0x84\\,umask\\=0x1@ ) / 1000000 / duration_time / 1000", + "MetricGroup": "HPC;Mem;MemoryBW;SoC", + "MetricName": "DRAM_BW_Use", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Average number of parallel requests to external memory. Accounts for all requests", + "MetricExpr": "UNC_ARB_TRK_OCCUPANCY.ALL / arb@event\\=0x81\\,umask\\=0x1@", + "MetricGroup": "Mem;SoC", + "MetricName": "MEM_Parallel_Requests", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Instructions per Far Branch ( Far Branches apply upon transition from application to operating system, handling interrupts, exceptions) [lower number means higher occurrence rate]", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.FAR_BRANCH:u", + "MetricGroup": "Branches;OS", + "MetricName": "IpFarBranch", + "Unit": "cpu_core" + }, + { + "BriefDescription": "Counts the number of issue slots that were not consumed by the backend due to frontend stalls.", + "MetricExpr": "TOPDOWN_FE_BOUND.ALL / (5 * CPU_CLK_UNHALTED.CORE)", + "MetricGroup": "TopdownL1", + "MetricName": "Frontend_Bound", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Counts the total number of issue slots that were not consumed by the backend because allocation is stalled due to a mispredicted jump or a machine clear", + "MetricExpr": "TOPDOWN_BAD_SPECULATION.ALL / (5 * CPU_CLK_UNHALTED.CORE)", + "MetricGroup": "TopdownL1", + "MetricName": "Bad_Speculation", + "PublicDescription": "Counts the total number of issue slots that were not consumed by the backend because allocation is stalled due to a mispredicted jump or a machine clear. Only issue slots wasted due to fast nukes such as memory ordering nukes are counted. Other nukes are not accounted for. Counts all issue slots blocked during this recovery window including relevant microcode flows and while uops are not yet available in the instruction queue (IQ). Also includes the issue slots that were consumed by the backend but were thrown away because they were younger than the mispredict or machine clear.", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Counts the total number of issue slots that were not consumed by the backend due to backend stalls", + "MetricConstraint": "NO_NMI_WATCHDOG", + "MetricExpr": "TOPDOWN_BE_BOUND.ALL / (5 * CPU_CLK_UNHALTED.CORE)", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound", + "PublicDescription": "Counts the total number of issue slots that were not consumed by the backend due to backend stalls. Note that uops must be available for consumption in order for this event to count. If a uop is not available (IQ is empty), this event will not count. The rest of these subevents count backend stalls, in cycles, due to an outstanding request which is memory bound vs core bound. The subevents are not slot based events and therefore can not be precisely added or subtracted from the Backend_Bound_Aux subevents which are slot based.", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Counts the total number of issue slots that were not consumed by the backend due to backend stalls", + "MetricExpr": "TOPDOWN_BE_BOUND.ALL / (5 * CPU_CLK_UNHALTED.CORE)", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound_Aux", + "PublicDescription": "Counts the total number of issue slots that were not consumed by the backend due to backend stalls. Note that UOPS must be available for consumption in order for this event to count. If a uop is not available (IQ is empty), this event will not count. All of these subevents count backend stalls, in slots, due to a resource limitation. These are not cycle based events and therefore can not be precisely added or subtracted from the Backend_Bound subevents which are cycle based. These subevents are supplementary to Backend_Bound and can be used to analyze results from a resource perspective at allocation. ", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Counts the numer of issue slots that result in retirement slots. ", + "MetricExpr": "TOPDOWN_RETIRING.ALL / (5 * CPU_CLK_UNHALTED.CORE)", + "MetricGroup": "TopdownL1", + "MetricName": "Retiring", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "", + "MetricExpr": "CPU_CLK_UNHALTED.CORE", + "MetricGroup": " ", + "MetricName": "CLKS", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "", + "MetricExpr": "CPU_CLK_UNHALTED.CORE_P", + "MetricGroup": " ", + "MetricName": "CLKS_P", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "", + "MetricExpr": "5 * CPU_CLK_UNHALTED.CORE", + "MetricGroup": " ", + "MetricName": "SLOTS", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Instructions Per Cycle", + "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.CORE", + "MetricGroup": " ", + "MetricName": "IPC", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Cycles Per Instruction", + "MetricExpr": "CPU_CLK_UNHALTED.CORE / INST_RETIRED.ANY", + "MetricGroup": " ", + "MetricName": "CPI", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Uops Per Instruction", + "MetricExpr": "UOPS_RETIRED.ALL / INST_RETIRED.ANY", + "MetricGroup": " ", + "MetricName": "UPI", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Percentage of total non-speculative loads with a store forward or unknown store address block", + "MetricExpr": "100 * LD_BLOCKS.DATA_UNKNOWN / MEM_UOPS_RETIRED.ALL_LOADS", + "MetricGroup": "", + "MetricName": "Store_Fwd_Blocks", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Percentage of total non-speculative loads with a address aliasing block", + "MetricExpr": "100 * LD_BLOCKS.4K_ALIAS / MEM_UOPS_RETIRED.ALL_LOADS", + "MetricGroup": "", + "MetricName": "Address_Alias_Blocks", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Percentage of total non-speculative loads that are splits", + "MetricExpr": "100 * MEM_UOPS_RETIRED.SPLIT_LOADS / MEM_UOPS_RETIRED.ALL_LOADS", + "MetricGroup": "", + "MetricName": "Load_Splits", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Instructions per Branch (lower number means higher occurrence rate)", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES", + "MetricGroup": " ", + "MetricName": "IpBranch", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Instruction per (near) call (lower number means higher occurrence rate)", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.CALL", + "MetricGroup": " ", + "MetricName": "IpCall", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Instructions per Load", + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_LOADS", + "MetricGroup": " ", + "MetricName": "IpLoad", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Instructions per Store", + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_STORES", + "MetricGroup": " ", + "MetricName": "IpStore", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction", + "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES", + "MetricGroup": " ", + "MetricName": "IpMispredict", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Instructions per Far Branch", + "MetricExpr": "INST_RETIRED.ANY / ( BR_INST_RETIRED.FAR_BRANCH / 2 )", + "MetricGroup": " ", + "MetricName": "IpFarBranch", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Ratio of all branches which mispredict", + "MetricExpr": "BR_MISP_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.ALL_BRANCHES", + "MetricGroup": " ", + "MetricName": "Branch_Mispredict_Ratio", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Ratio between Mispredicted branches and unknown branches", + "MetricExpr": "BR_MISP_RETIRED.ALL_BRANCHES / BACLEARS.ANY", + "MetricGroup": " ", + "MetricName": "Branch_Mispredict_to_Unknown_Branch_Ratio", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Percentage of all uops which are ucode ops", + "MetricExpr": "100 * UOPS_RETIRED.MS / UOPS_RETIRED.ALL", + "MetricGroup": " ", + "MetricName": "Microcode_Uop_Ratio", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Percentage of all uops which are FPDiv uops", + "MetricExpr": "100 * UOPS_RETIRED.FPDIV / UOPS_RETIRED.ALL", + "MetricGroup": " ", + "MetricName": "FPDiv_Uop_Ratio", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Percentage of all uops which are IDiv uops", + "MetricExpr": "100 * UOPS_RETIRED.IDIV / UOPS_RETIRED.ALL", + "MetricGroup": " ", + "MetricName": "IDiv_Uop_Ratio", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Percentage of all uops which are x87 uops", + "MetricExpr": "100 * UOPS_RETIRED.X87 / UOPS_RETIRED.ALL", + "MetricGroup": " ", + "MetricName": "X87_Uop_Ratio", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Average Frequency Utilization relative nominal frequency", + "MetricExpr": "CPU_CLK_UNHALTED.CORE / CPU_CLK_UNHALTED.REF_TSC", + "MetricGroup": " ", + "MetricName": "Turbo_Utilization", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Fraction of cycles spent in Kernel mode", + "MetricExpr": "CPU_CLK_UNHALTED.CORE:k / CPU_CLK_UNHALTED.CORE", + "MetricGroup": " ", + "MetricName": "Kernel_Utilization", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Average CPU Utilization", + "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "MetricGroup": " ", + "MetricName": "CPU_Utilization", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Estimated Pause cost. In percent", + "MetricExpr": "100 * SERIALIZATION.NON_C01_MS_SCB / ( 5 * CPU_CLK_UNHALTED.CORE )", + "MetricGroup": " ", + "MetricName": "Estimated_Pause_Cost", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Cycle cost per L2 hit", + "MetricExpr": "MEM_BOUND_STALLS.LOAD_L2_HIT / MEM_LOAD_UOPS_RETIRED.L2_HIT", + "MetricGroup": " ", + "MetricName": "Cycles_per_Demand_Load_L2_Hit", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Cycle cost per LLC hit", + "MetricExpr": "MEM_BOUND_STALLS.LOAD_LLC_HIT / MEM_LOAD_UOPS_RETIRED.L3_HIT", + "MetricGroup": " ", + "MetricName": "Cycles_per_Demand_Load_L3_Hit", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Cycle cost per DRAM hit", + "MetricExpr": "MEM_BOUND_STALLS.LOAD_DRAM_HIT / MEM_LOAD_UOPS_RETIRED.DRAM_HIT", + "MetricGroup": " ", + "MetricName": "Cycles_per_Demand_Load_DRAM_Hit", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Percent of instruction miss cost that hit in the L2", + "MetricExpr": "100 * MEM_BOUND_STALLS.IFETCH_L2_HIT / ( MEM_BOUND_STALLS.IFETCH )", + "MetricGroup": " ", + "MetricName": "Inst_Miss_Cost_L2Hit_Percent", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Percent of instruction miss cost that hit in the L3", + "MetricExpr": "100 * MEM_BOUND_STALLS.IFETCH_LLC_HIT / ( MEM_BOUND_STALLS.IFETCH )", + "MetricGroup": " ", + "MetricName": "Inst_Miss_Cost_L3Hit_Percent", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "Percent of instruction miss cost that hit in DRAM", + "MetricExpr": "100 * MEM_BOUND_STALLS.IFETCH_DRAM_HIT / ( MEM_BOUND_STALLS.IFETCH )", + "MetricGroup": " ", + "MetricName": "Inst_Miss_Cost_DRAMHit_Percent", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "load ops retired per 1000 instruction", + "MetricExpr": "1000 * MEM_UOPS_RETIRED.ALL_LOADS / INST_RETIRED.ANY", + "MetricGroup": " ", + "MetricName": "MemLoadPKI", + "Unit": "cpu_atom" + }, + { + "BriefDescription": "C1 residency percent per core", + "MetricExpr": "(cstate_core@c1\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C1_Core_Residency" + }, + { + "BriefDescription": "C6 residency percent per core", + "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C6_Core_Residency" + }, + { + "BriefDescription": "C7 residency percent per core", + "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C7_Core_Residency" + }, + { + "BriefDescription": "C2 residency percent per package", + "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C2_Pkg_Residency" + }, + { + "BriefDescription": "C3 residency percent per package", + "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C3_Pkg_Residency" + }, + { + "BriefDescription": "C6 residency percent per package", + "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C6_Pkg_Residency" + }, + { + "BriefDescription": "C7 residency percent per package", + "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C7_Pkg_Residency" + }, + { + "BriefDescription": "C8 residency percent per package", + "MetricExpr": "(cstate_pkg@c8\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C8_Pkg_Residency" + }, + { + "BriefDescription": "C9 residency percent per package", + "MetricExpr": "(cstate_pkg@c9\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C9_Pkg_Residency" + }, + { + "BriefDescription": "C10 residency percent per package", + "MetricExpr": "(cstate_pkg@c10\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C10_Pkg_Residency" + } +] diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-memory.json b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-memory.json index 2600fd8d7a54..a416515d41da 100644 --- a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-memory.json +++ b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-memory.json @@ -10,6 +10,16 @@ "Unit": "iMC" }, { + "BriefDescription": "read requests to memory controller", + "Counter": "0,1,2,3", + "EventCode": "0x4", + "EventName": "UNC_M_CAS_COUNT.RD", + "PerPkg": "1", + "ScaleUnit": "64Bytes", + "UMask": "0x3", + "Unit": "iMC" + }, + { "BriefDescription": "write requests to memory controller. Derived from unc_m_cas_count.wr", "Counter": "0,1,2,3", "EventCode": "0x4", @@ -20,6 +30,16 @@ "Unit": "iMC" }, { + "BriefDescription": "write requests to memory controller", + "Counter": "0,1,2,3", + "EventCode": "0x4", + "EventName": "UNC_M_CAS_COUNT.WR", + "PerPkg": "1", + "ScaleUnit": "64Bytes", + "UMask": "0xC", + "Unit": "iMC" + }, + { "BriefDescription": "Memory controller clock ticks", "Counter": "0,1,2,3", "EventName": "UNC_M_CLOCKTICKS", @@ -90,6 +110,15 @@ "Unit": "iMC" }, { + "BriefDescription": "Intel Optane DC persistent memory bandwidth read (MB/sec)", + "Counter": "0,1,2,3", + "EventCode": "0xE3", + "EventName": "UNC_M_PMM_RPQ_INSERTS", + "PerPkg": "1", + "ScaleUnit": "6.103515625E-5MB/sec", + "Unit": "iMC" + }, + { "BriefDescription": "Intel Optane DC persistent memory bandwidth write (MB/sec). Derived from unc_m_pmm_wpq_inserts", "Counter": "0,1,2,3", "EventCode": "0xE7", @@ -99,6 +128,15 @@ "Unit": "iMC" }, { + "BriefDescription": "Intel Optane DC persistent memory bandwidth write (MB/sec)", + "Counter": "0,1,2,3", + "EventCode": "0xE7", + "EventName": "UNC_M_PMM_WPQ_INSERTS", + "PerPkg": "1", + "ScaleUnit": "6.103515625E-5MB/sec", + "Unit": "iMC" + }, + { "BriefDescription": "Intel Optane DC persistent memory bandwidth total (MB/sec). Derived from unc_m_pmm_rpq_inserts", "Counter": "0,1,2,3", "EventCode": "0xE3", @@ -110,6 +148,17 @@ "Unit": "iMC" }, { + "BriefDescription": "Intel Optane DC persistent memory bandwidth total (MB/sec)", + "Counter": "0,1,2,3", + "EventCode": "0xE3", + "EventName": "UNC_M_PMM_RPQ_INSERTS", + "MetricExpr": "UNC_M_PMM_RPQ_INSERTS + UNC_M_PMM_WPQ_INSERTS", + "MetricName": "UNC_M_PMM_BANDWIDTH.TOTAL", + "PerPkg": "1", + "ScaleUnit": "6.103515625E-5MB/sec", + "Unit": "iMC" + }, + { "BriefDescription": "Read Pending Queue Occupancy of all read requests for Intel Optane DC persistent memory", "Counter": "0,1,2,3", "EventCode": "0xE0", @@ -131,6 +180,18 @@ "Unit": "iMC" }, { + "BriefDescription": "Intel Optane DC persistent memory read latency (ns)", + "Counter": "0,1,2,3", + "EventCode": "0xE0", + "EventName": "UNC_M_PMM_RPQ_OCCUPANCY.ALL", + "MetricExpr": "UNC_M_PMM_RPQ_OCCUPANCY.ALL / UNC_M_PMM_RPQ_INSERTS / UNC_M_CLOCKTICKS", + "MetricName": "UNC_M_PMM_READ_LATENCY", + "PerPkg": "1", + "ScaleUnit": "6000000000ns", + "UMask": "0x1", + "Unit": "iMC" + }, + { "BriefDescription": "DRAM Page Activate commands sent due to a write request", "Counter": "0,1,2,3", "EventCode": "0x1", diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json index 7f1cf4d8f0fa..03575ef9f4c3 100644 --- a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json +++ b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json @@ -17,6 +17,16 @@ "Unit": "CHA" }, { + "BriefDescription": "LLC misses - Uncacheable reads (from cpu) ", + "Counter": "0,1,2,3", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x40e33", + "PerPkg": "1", + "UMask": "0x21", + "Unit": "CHA" + }, + { "BriefDescription": "MMIO reads. Derived from unc_cha_tor_inserts.ia_miss", "Counter": "0,1,2,3", "EventCode": "0x35", @@ -27,6 +37,16 @@ "Unit": "CHA" }, { + "BriefDescription": "MMIO reads", + "Counter": "0,1,2,3", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x40040e33", + "PerPkg": "1", + "UMask": "0x21", + "Unit": "CHA" + }, + { "BriefDescription": "MMIO writes. Derived from unc_cha_tor_inserts.ia_miss", "Counter": "0,1,2,3", "EventCode": "0x35", @@ -37,6 +57,16 @@ "Unit": "CHA" }, { + "BriefDescription": "MMIO writes", + "Counter": "0,1,2,3", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x40041e33", + "PerPkg": "1", + "UMask": "0x21", + "Unit": "CHA" + }, + { "BriefDescription": "Streaming stores (full cache line). Derived from unc_cha_tor_inserts.ia_miss", "Counter": "0,1,2,3", "EventCode": "0x35", @@ -48,6 +78,17 @@ "Unit": "CHA" }, { + "BriefDescription": "Streaming stores (full cache line)", + "Counter": "0,1,2,3", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x41833", + "PerPkg": "1", + "ScaleUnit": "64Bytes", + "UMask": "0x21", + "Unit": "CHA" + }, + { "BriefDescription": "Streaming stores (partial cache line). Derived from unc_cha_tor_inserts.ia_miss", "Counter": "0,1,2,3", "EventCode": "0x35", @@ -59,6 +100,17 @@ "Unit": "CHA" }, { + "BriefDescription": "Streaming stores (partial cache line)", + "Counter": "0,1,2,3", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x41a33", + "PerPkg": "1", + "ScaleUnit": "64Bytes", + "UMask": "0x21", + "Unit": "CHA" + }, + { "BriefDescription": "read requests from home agent", "Counter": "0,1,2,3", "EventCode": "0x50", @@ -114,6 +166,16 @@ "Unit": "UPI LL" }, { + "BriefDescription": "UPI interconnect send bandwidth for payload", + "Counter": "0,1,2,3", + "EventCode": "0x2", + "EventName": "UNC_UPI_TxL_FLITS.ALL_DATA", + "PerPkg": "1", + "ScaleUnit": "7.11E-06Bytes", + "UMask": "0xf", + "Unit": "UPI LL" + }, + { "BriefDescription": "PCI Express bandwidth writing at IIO, part 0", "Counter": "0,1", "EventCode": "0x83", @@ -177,6 +239,21 @@ "Unit": "IIO" }, { + "BriefDescription": "PCI Express bandwidth writing at IIO", + "Counter": "0,1", + "EventCode": "0x83", + "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0", + "FCMask": "0x07", + "Filter": "ch_mask=0x1f", + "MetricExpr": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3", + "MetricName": "LLC_MISSES.PCIE_WRITE", + "PerPkg": "1", + "PortMask": "0x01", + "ScaleUnit": "4Bytes", + "UMask": "0x01", + "Unit": "IIO" + }, + { "BriefDescription": "PCI Express bandwidth reading at IIO, part 0", "Counter": "0,1", "EventCode": "0x83", @@ -240,6 +317,21 @@ "Unit": "IIO" }, { + "BriefDescription": "PCI Express bandwidth reading at IIO", + "Counter": "0,1", + "EventCode": "0x83", + "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0", + "FCMask": "0x07", + "Filter": "ch_mask=0x1f", + "MetricExpr": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART1 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART2 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART3", + "MetricName": "LLC_MISSES.PCIE_READ", + "PerPkg": "1", + "PortMask": "0x01", + "ScaleUnit": "4Bytes", + "UMask": "0x04", + "Unit": "IIO" + }, + { "BriefDescription": "Core Cross Snoops Issued; Multiple Core Requests", "Counter": "0,1,2,3", "EventCode": "0x33", diff --git a/tools/perf/pmu-events/arch/x86/elkhartlake/other.json b/tools/perf/pmu-events/arch/x86/elkhartlake/other.json index de55b199ba79..8692d4847476 100644 --- a/tools/perf/pmu-events/arch/x86/elkhartlake/other.json +++ b/tools/perf/pmu-events/arch/x86/elkhartlake/other.json @@ -1,16 +1,5 @@ [ { - "BriefDescription": "Counts the total number of BTCLEARS.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", - "EventCode": "0xe8", - "EventName": "BTCLEAR.ANY", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", - "PublicDescription": "Counts the total number of BTCLEARS which occurs when the Branch Target Buffer (BTB) predicts a taken branch.", - "SampleAfterValue": "200003" - }, - { "BriefDescription": "This event is deprecated. Refer to new event BUS_LOCK.SELF_LOCKS", "CollectPEBSRecord": "2", "Counter": "0,1,2,3", @@ -180,4 +169,4 @@ "SampleAfterValue": "100003", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/elkhartlake/pipeline.json b/tools/perf/pmu-events/arch/x86/elkhartlake/pipeline.json index 31816c6543a8..c18acb422145 100644 --- a/tools/perf/pmu-events/arch/x86/elkhartlake/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/elkhartlake/pipeline.json @@ -154,6 +154,17 @@ "UMask": "0xfe" }, { + "BriefDescription": "Counts the total number of BTCLEARS.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0xe8", + "EventName": "BTCLEAR.ANY", + "PDIR_COUNTER": "na", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the total number of BTCLEARS which occurs when the Branch Target Buffer (BTB) predicts a taken branch.", + "SampleAfterValue": "200003" + }, + { "BriefDescription": "Counts the number of unhalted core clock cycles. (Fixed event)", "CollectPEBSRecord": "2", "Counter": "Fixed counter 1", @@ -516,4 +527,4 @@ "SampleAfterValue": "2000003", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/goldmont/other.json b/tools/perf/pmu-events/arch/x86/goldmont/other.json index e4605e636447..d888f67aa2ea 100644 --- a/tools/perf/pmu-events/arch/x86/goldmont/other.json +++ b/tools/perf/pmu-events/arch/x86/goldmont/other.json @@ -47,34 +47,5 @@ "PublicDescription": "Counts hardware interrupts received by the processor.", "SampleAfterValue": "203", "UMask": "0x1" - }, - { - "BriefDescription": "Unfilled issue slots per cycle", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", - "EventCode": "0xCA", - "EventName": "ISSUE_SLOTS_NOT_CONSUMED.ANY", - "PublicDescription": "Counts the number of issue slots per core cycle that were not consumed by the backend due to either a full resource in the backend (RESOURCE_FULL) or due to the processor recovering from some event (RECOVERY).", - "SampleAfterValue": "200003" - }, - { - "BriefDescription": "Unfilled issue slots per cycle to recover", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", - "EventCode": "0xCA", - "EventName": "ISSUE_SLOTS_NOT_CONSUMED.RECOVERY", - "PublicDescription": "Counts the number of issue slots per core cycle that were not consumed by the backend because allocation is stalled waiting for a mispredicted jump to retire or other branch-like conditions (e.g. the event is relevant during certain microcode flows). Counts all issue slots blocked while within this window including slots where uops were not available in the Instruction Queue.", - "SampleAfterValue": "200003", - "UMask": "0x2" - }, - { - "BriefDescription": "Unfilled issue slots per cycle because of a full resource in the backend", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", - "EventCode": "0xCA", - "EventName": "ISSUE_SLOTS_NOT_CONSUMED.RESOURCE_FULL", - "PublicDescription": "Counts the number of issue slots per core cycle that were not consumed because of a full resource in the backend. Including but not limited to resources such as the Re-order Buffer (ROB), reservation stations (RS), load/store buffers, physical registers, or any other needed machine resource that is currently unavailable. Note that uops must be available for consumption in order for this event to fire. If a uop is not available (Instruction Queue is empty), this event will not count.", - "SampleAfterValue": "200003", - "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/goldmont/pipeline.json b/tools/perf/pmu-events/arch/x86/goldmont/pipeline.json index cb9155c3836d..5dba4313013f 100644 --- a/tools/perf/pmu-events/arch/x86/goldmont/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/goldmont/pipeline.json @@ -246,6 +246,35 @@ "SampleAfterValue": "2000003" }, { + "BriefDescription": "Unfilled issue slots per cycle", + "CollectPEBSRecord": "1", + "Counter": "0,1,2,3", + "EventCode": "0xCA", + "EventName": "ISSUE_SLOTS_NOT_CONSUMED.ANY", + "PublicDescription": "Counts the number of issue slots per core cycle that were not consumed by the backend due to either a full resource in the backend (RESOURCE_FULL) or due to the processor recovering from some event (RECOVERY).", + "SampleAfterValue": "200003" + }, + { + "BriefDescription": "Unfilled issue slots per cycle to recover", + "CollectPEBSRecord": "1", + "Counter": "0,1,2,3", + "EventCode": "0xCA", + "EventName": "ISSUE_SLOTS_NOT_CONSUMED.RECOVERY", + "PublicDescription": "Counts the number of issue slots per core cycle that were not consumed by the backend because allocation is stalled waiting for a mispredicted jump to retire or other branch-like conditions (e.g. the event is relevant during certain microcode flows). Counts all issue slots blocked while within this window including slots where uops were not available in the Instruction Queue.", + "SampleAfterValue": "200003", + "UMask": "0x2" + }, + { + "BriefDescription": "Unfilled issue slots per cycle because of a full resource in the backend", + "CollectPEBSRecord": "1", + "Counter": "0,1,2,3", + "EventCode": "0xCA", + "EventName": "ISSUE_SLOTS_NOT_CONSUMED.RESOURCE_FULL", + "PublicDescription": "Counts the number of issue slots per core cycle that were not consumed because of a full resource in the backend. Including but not limited to resources such as the Re-order Buffer (ROB), reservation stations (RS), load/store buffers, physical registers, or any other needed machine resource that is currently unavailable. Note that uops must be available for consumption in order for this event to fire. If a uop is not available (Instruction Queue is empty), this event will not count.", + "SampleAfterValue": "200003", + "UMask": "0x1" + }, + { "BriefDescription": "Loads blocked because address has 4k partial address false dependence (Precise event capable)", "CollectPEBSRecord": "2", "Counter": "0,1,2,3", @@ -379,4 +408,4 @@ "SampleAfterValue": "2000003", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/goldmontplus/other.json b/tools/perf/pmu-events/arch/x86/goldmontplus/other.json index 3378f48cb818..92586fe4538a 100644 --- a/tools/perf/pmu-events/arch/x86/goldmontplus/other.json +++ b/tools/perf/pmu-events/arch/x86/goldmontplus/other.json @@ -57,40 +57,5 @@ "PublicDescription": "Counts hardware interrupts received by the processor.", "SampleAfterValue": "203", "UMask": "0x1" - }, - { - "BriefDescription": "Unfilled issue slots per cycle", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", - "EventCode": "0xCA", - "EventName": "ISSUE_SLOTS_NOT_CONSUMED.ANY", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", - "PublicDescription": "Counts the number of issue slots per core cycle that were not consumed by the backend due to either a full resource in the backend (RESOURCE_FULL) or due to the processor recovering from some event (RECOVERY).", - "SampleAfterValue": "200003" - }, - { - "BriefDescription": "Unfilled issue slots per cycle to recover", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", - "EventCode": "0xCA", - "EventName": "ISSUE_SLOTS_NOT_CONSUMED.RECOVERY", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", - "PublicDescription": "Counts the number of issue slots per core cycle that were not consumed by the backend because allocation is stalled waiting for a mispredicted jump to retire or other branch-like conditions (e.g. the event is relevant during certain microcode flows). Counts all issue slots blocked while within this window including slots where uops were not available in the Instruction Queue.", - "SampleAfterValue": "200003", - "UMask": "0x2" - }, - { - "BriefDescription": "Unfilled issue slots per cycle because of a full resource in the backend", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", - "EventCode": "0xCA", - "EventName": "ISSUE_SLOTS_NOT_CONSUMED.RESOURCE_FULL", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", - "PublicDescription": "Counts the number of issue slots per core cycle that were not consumed because of a full resource in the backend. Including but not limited to resources such as the Re-order Buffer (ROB), reservation stations (RS), load/store buffers, physical registers, or any other needed machine resource that is currently unavailable. Note that uops must be available for consumption in order for this event to fire. If a uop is not available (Instruction Queue is empty), this event will not count.", - "SampleAfterValue": "200003", - "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/goldmontplus/pipeline.json b/tools/perf/pmu-events/arch/x86/goldmontplus/pipeline.json index 8305e2ecf617..4d7e3129e5ac 100644 --- a/tools/perf/pmu-events/arch/x86/goldmontplus/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/goldmontplus/pipeline.json @@ -291,6 +291,41 @@ "SampleAfterValue": "2000003" }, { + "BriefDescription": "Unfilled issue slots per cycle", + "CollectPEBSRecord": "1", + "Counter": "0,1,2,3", + "EventCode": "0xCA", + "EventName": "ISSUE_SLOTS_NOT_CONSUMED.ANY", + "PDIR_COUNTER": "na", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of issue slots per core cycle that were not consumed by the backend due to either a full resource in the backend (RESOURCE_FULL) or due to the processor recovering from some event (RECOVERY).", + "SampleAfterValue": "200003" + }, + { + "BriefDescription": "Unfilled issue slots per cycle to recover", + "CollectPEBSRecord": "1", + "Counter": "0,1,2,3", + "EventCode": "0xCA", + "EventName": "ISSUE_SLOTS_NOT_CONSUMED.RECOVERY", + "PDIR_COUNTER": "na", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of issue slots per core cycle that were not consumed by the backend because allocation is stalled waiting for a mispredicted jump to retire or other branch-like conditions (e.g. the event is relevant during certain microcode flows). Counts all issue slots blocked while within this window including slots where uops were not available in the Instruction Queue.", + "SampleAfterValue": "200003", + "UMask": "0x2" + }, + { + "BriefDescription": "Unfilled issue slots per cycle because of a full resource in the backend", + "CollectPEBSRecord": "1", + "Counter": "0,1,2,3", + "EventCode": "0xCA", + "EventName": "ISSUE_SLOTS_NOT_CONSUMED.RESOURCE_FULL", + "PDIR_COUNTER": "na", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of issue slots per core cycle that were not consumed because of a full resource in the backend. Including but not limited to resources such as the Re-order Buffer (ROB), reservation stations (RS), load/store buffers, physical registers, or any other needed machine resource that is currently unavailable. Note that uops must be available for consumption in order for this event to fire. If a uop is not available (Instruction Queue is empty), this event will not count.", + "SampleAfterValue": "200003", + "UMask": "0x1" + }, + { "BriefDescription": "Loads blocked because address has 4k partial address false dependence (Precise event capable)", "CollectPEBSRecord": "2", "Counter": "0,1,2,3", @@ -456,4 +491,4 @@ "SampleAfterValue": "2000003", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/icelake/cache.json b/tools/perf/pmu-events/arch/x86/icelake/cache.json index 375ce490833c..9989f3338f0a 100644 --- a/tools/perf/pmu-events/arch/x86/icelake/cache.json +++ b/tools/perf/pmu-events/arch/x86/icelake/cache.json @@ -563,7 +563,6 @@ "MSRValue": "0x3FC03C0004", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -578,7 +577,6 @@ "MSRValue": "0x10003C0004", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -593,7 +591,6 @@ "MSRValue": "0x4003C0004", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -608,7 +605,6 @@ "MSRValue": "0x2003C0004", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -623,7 +619,6 @@ "MSRValue": "0x1003C0004", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -638,7 +633,6 @@ "MSRValue": "0x1E003C0004", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -653,7 +647,6 @@ "MSRValue": "0x3FC03C0001", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -668,7 +661,6 @@ "MSRValue": "0x10003C0001", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -683,7 +675,6 @@ "MSRValue": "0x4003C0001", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -698,7 +689,6 @@ "MSRValue": "0x2003C0001", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -713,7 +703,6 @@ "MSRValue": "0x1003C0001", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -728,7 +717,6 @@ "MSRValue": "0x1E003C0001", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -743,7 +731,6 @@ "MSRValue": "0x3FC03C0002", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -758,7 +745,6 @@ "MSRValue": "0x10003C0002", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -773,7 +759,6 @@ "MSRValue": "0x4003C0002", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -788,7 +773,6 @@ "MSRValue": "0x2003C0002", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -803,7 +787,6 @@ "MSRValue": "0x1003C0002", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -818,7 +801,6 @@ "MSRValue": "0x1E003C0002", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -833,7 +815,6 @@ "MSRValue": "0x3FC03C0400", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -848,7 +829,6 @@ "MSRValue": "0x2003C0400", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -863,7 +843,6 @@ "MSRValue": "0x1003C0400", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -878,7 +857,6 @@ "MSRValue": "0x3FC03C0010", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -893,7 +871,6 @@ "MSRValue": "0x10003C0010", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -908,7 +885,6 @@ "MSRValue": "0x4003C0010", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -923,7 +899,6 @@ "MSRValue": "0x2003C0010", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -938,7 +913,6 @@ "MSRValue": "0x1003C0010", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -953,7 +927,6 @@ "MSRValue": "0x1E003C0010", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -968,7 +941,6 @@ "MSRValue": "0x3FC03C0020", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -983,7 +955,6 @@ "MSRValue": "0x10003C0020", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -998,7 +969,6 @@ "MSRValue": "0x4003C0020", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -1013,7 +983,6 @@ "MSRValue": "0x2003C0020", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -1028,7 +997,6 @@ "MSRValue": "0x1003C0020", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -1043,7 +1011,6 @@ "MSRValue": "0x1E003C0020", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -1058,7 +1025,6 @@ "MSRValue": "0x3FC03C2380", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -1073,7 +1039,6 @@ "MSRValue": "0x4003C8000", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -1088,7 +1053,6 @@ "MSRValue": "0x2003C8000", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -1103,7 +1067,6 @@ "MSRValue": "0x1003C8000", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -1118,7 +1081,6 @@ "MSRValue": "0x1E003C8000", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -1133,7 +1095,6 @@ "MSRValue": "0x3FC03C0800", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -1308,4 +1269,4 @@ "Speculative": "1", "UMask": "0x4" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/icelake/icl-metrics.json b/tools/perf/pmu-events/arch/x86/icelake/icl-metrics.json index 4af23c04dc18..622c392f59be 100644 --- a/tools/perf/pmu-events/arch/x86/icelake/icl-metrics.json +++ b/tools/perf/pmu-events/arch/x86/icelake/icl-metrics.json @@ -18,18 +18,6 @@ "MetricName": "IPC" }, { - "BriefDescription": "Uops Per Instruction", - "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY", - "MetricGroup": "Pipeline;Ret;Retire", - "MetricName": "UPI" - }, - { - "BriefDescription": "Instruction per taken branch", - "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / BR_INST_RETIRED.NEAR_TAKEN", - "MetricGroup": "Branches;Fed;FetchBW", - "MetricName": "UpTB" - }, - { "BriefDescription": "Cycles Per Instruction (per Logical Processor)", "MetricExpr": "1 / (INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD)", "MetricGroup": "Pipeline;Mem", @@ -409,12 +397,6 @@ "MetricName": "IpFarBranch" }, { - "BriefDescription": "C3 residency percent per core", - "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", - "MetricGroup": "Power", - "MetricName": "C3_Core_Residency" - }, - { "BriefDescription": "C6 residency percent per core", "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", @@ -449,5 +431,23 @@ "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", "MetricName": "C7_Pkg_Residency" + }, + { + "BriefDescription": "C8 residency percent per package", + "MetricExpr": "(cstate_pkg@c8\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C8_Pkg_Residency" + }, + { + "BriefDescription": "C9 residency percent per package", + "MetricExpr": "(cstate_pkg@c9\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C9_Pkg_Residency" + }, + { + "BriefDescription": "C10 residency percent per package", + "MetricExpr": "(cstate_pkg@c10\\-residency@ / msr@tsc@) * 100", + "MetricGroup": "Power", + "MetricName": "C10_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/arch/x86/icelake/memory.json b/tools/perf/pmu-events/arch/x86/icelake/memory.json index f045e1f6a868..a6f43cbc2d0a 100644 --- a/tools/perf/pmu-events/arch/x86/icelake/memory.json +++ b/tools/perf/pmu-events/arch/x86/icelake/memory.json @@ -239,7 +239,6 @@ "MSRValue": "0x3FFFC00004", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -254,7 +253,6 @@ "MSRValue": "0x3FFFC00001", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -269,7 +267,6 @@ "MSRValue": "0x3FFFC00002", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -284,7 +281,6 @@ "MSRValue": "0x3FFFC00400", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -299,7 +295,6 @@ "MSRValue": "0x3FFFC00010", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -314,7 +309,6 @@ "MSRValue": "0x3FFFC00020", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -329,7 +323,6 @@ "MSRValue": "0x3FFFC08000", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -344,7 +337,6 @@ "MSRValue": "0x3FFFC00800", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -570,4 +562,4 @@ "Speculative": "1", "UMask": "0x40" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/icelake/other.json b/tools/perf/pmu-events/arch/x86/icelake/other.json index 08f6321025e8..3055710595c4 100644 --- a/tools/perf/pmu-events/arch/x86/icelake/other.json +++ b/tools/perf/pmu-events/arch/x86/icelake/other.json @@ -1,17 +1,5 @@ [ { - "BriefDescription": "Number of occurrences where a microcode assist is invoked by hardware.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", - "EventCode": "0xc1", - "EventName": "ASSISTS.ANY", - "PEBScounters": "0,1,2,3,4,5,6,7", - "PublicDescription": "Counts the number of occurrences where a microcode assist is invoked by hardware Examples include AD (page Access Dirty), FP and AVX related assists.", - "SampleAfterValue": "100003", - "Speculative": "1", - "UMask": "0x7" - }, - { "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the Non-AVX turbo schedule.", "CollectPEBSRecord": "2", "Counter": "0,1,2,3", @@ -57,7 +45,6 @@ "MSRValue": "0x10004", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -72,7 +59,6 @@ "MSRValue": "0x184000004", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -87,7 +73,6 @@ "MSRValue": "0x184000004", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -102,7 +87,6 @@ "MSRValue": "0x10001", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -117,7 +101,6 @@ "MSRValue": "0x184000001", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -132,7 +115,6 @@ "MSRValue": "0x184000001", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -147,7 +129,6 @@ "MSRValue": "0x10002", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -162,7 +143,6 @@ "MSRValue": "0x184000002", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -177,7 +157,6 @@ "MSRValue": "0x184000002", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -192,7 +171,6 @@ "MSRValue": "0x10400", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -207,7 +185,6 @@ "MSRValue": "0x184000400", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -222,7 +199,6 @@ "MSRValue": "0x184000400", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -237,7 +213,6 @@ "MSRValue": "0x10010", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -252,7 +227,6 @@ "MSRValue": "0x184000010", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -267,7 +241,6 @@ "MSRValue": "0x184000010", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -282,7 +255,6 @@ "MSRValue": "0x10020", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -297,7 +269,6 @@ "MSRValue": "0x184000020", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -312,7 +283,6 @@ "MSRValue": "0x184000020", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -327,7 +297,6 @@ "MSRValue": "0x18000", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -342,7 +311,6 @@ "MSRValue": "0x184008000", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -357,7 +325,6 @@ "MSRValue": "0x184008000", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -372,7 +339,6 @@ "MSRValue": "0x10800", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -387,7 +353,6 @@ "MSRValue": "0x184000800", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" @@ -402,9 +367,8 @@ "MSRValue": "0x184000800", "Offcore": "1", "PEBScounters": "0,1,2,3", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "Speculative": "1", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/icelake/pipeline.json b/tools/perf/pmu-events/arch/x86/icelake/pipeline.json index 573ac7ac8879..a017a4727050 100644 --- a/tools/perf/pmu-events/arch/x86/icelake/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/icelake/pipeline.json @@ -13,6 +13,18 @@ "UMask": "0x9" }, { + "BriefDescription": "Number of occurrences where a microcode assist is invoked by hardware.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc1", + "EventName": "ASSISTS.ANY", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of occurrences where a microcode assist is invoked by hardware Examples include AD (page Access Dirty), FP and AVX related assists.", + "SampleAfterValue": "100003", + "Speculative": "1", + "UMask": "0x7" + }, + { "BriefDescription": "All branch instructions retired.", "CollectPEBSRecord": "2", "Counter": "0,1,2,3,4,5,6,7", @@ -441,6 +453,18 @@ "UMask": "0x1" }, { + "BriefDescription": "Instruction decoders utilized in a cycle", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x55", + "EventName": "INST_DECODED.DECODERS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Number of decoders utilized in a cycle when the MITE (legacy decode pipeline) fetches instructions.", + "SampleAfterValue": "2000003", + "Speculative": "1", + "UMask": "0x1" + }, + { "BriefDescription": "Number of instructions retired. Fixed Counter - architectural event", "CollectPEBSRecord": "2", "Counter": "Fixed counter 0", @@ -1102,4 +1126,4 @@ "SampleAfterValue": "1000003", "UMask": "0x2" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/icelakex/cache.json b/tools/perf/pmu-events/arch/x86/icelakex/cache.json index 3c4da0371df9..95fcbec188f8 100644 --- a/tools/perf/pmu-events/arch/x86/icelakex/cache.json +++ b/tools/perf/pmu-events/arch/x86/icelakex/cache.json @@ -665,7 +665,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -677,7 +676,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -689,7 +687,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1008000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -701,7 +698,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x808000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -713,7 +709,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -725,7 +720,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -737,7 +731,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -749,7 +742,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -761,7 +753,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1030000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -773,7 +764,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x830000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -785,7 +775,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1008000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -797,7 +786,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x808000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -809,7 +797,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -821,7 +808,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -833,7 +819,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1008000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -845,7 +830,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x808000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -857,7 +841,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -869,7 +852,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80082380", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -881,7 +863,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C27F0", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -893,7 +874,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F003C0477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -905,7 +885,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -917,7 +896,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -929,7 +907,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -941,7 +918,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1830000477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -953,7 +929,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1030000477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -965,7 +940,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x830000477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -977,7 +951,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1008000477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -989,7 +962,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x808000477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1001,7 +973,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80080800", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1200,4 +1171,4 @@ "Speculative": "1", "UMask": "0x4" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json b/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json index a737fa40feb0..be70672bfdb0 100644 --- a/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json +++ b/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json @@ -475,10 +475,10 @@ "MetricName": "IpFarBranch" }, { - "BriefDescription": "C3 residency percent per core", - "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", + "BriefDescription": "C1 residency percent per core", + "MetricExpr": "(cstate_core@c1\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", - "MetricName": "C3_Core_Residency" + "MetricName": "C1_Core_Residency" }, { "BriefDescription": "C6 residency percent per core", @@ -487,33 +487,15 @@ "MetricName": "C6_Core_Residency" }, { - "BriefDescription": "C7 residency percent per core", - "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", - "MetricGroup": "Power", - "MetricName": "C7_Core_Residency" - }, - { "BriefDescription": "C2 residency percent per package", "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", "MetricName": "C2_Pkg_Residency" }, { - "BriefDescription": "C3 residency percent per package", - "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", - "MetricGroup": "Power", - "MetricName": "C3_Pkg_Residency" - }, - { "BriefDescription": "C6 residency percent per package", "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", "MetricName": "C6_Pkg_Residency" - }, - { - "BriefDescription": "C7 residency percent per package", - "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", - "MetricGroup": "Power", - "MetricName": "C7_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/arch/x86/icelakex/memory.json b/tools/perf/pmu-events/arch/x86/icelakex/memory.json index c10a1bbc66b1..58b03a8a1b95 100644 --- a/tools/perf/pmu-events/arch/x86/icelakex/memory.json +++ b/tools/perf/pmu-events/arch/x86/icelakex/memory.json @@ -159,7 +159,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBFC00004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -171,7 +170,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F84400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -183,7 +181,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBFC00001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -195,7 +192,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F84400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -207,7 +203,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F3FC00002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -219,7 +214,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F04400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -231,7 +225,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBFC00400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -243,7 +236,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F84400400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -255,7 +247,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x94002380", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -267,7 +258,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x84002380", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -279,7 +269,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x84000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -291,7 +280,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBFC08000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -303,7 +291,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F84408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -315,7 +302,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F844027F0", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -327,7 +313,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F3FC00477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -339,7 +324,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F04400477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -351,7 +335,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x70CC00477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -363,7 +346,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x94000800", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -375,7 +357,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x84000800", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -565,4 +546,4 @@ "Speculative": "1", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/icelakex/other.json b/tools/perf/pmu-events/arch/x86/icelakex/other.json index 1246b22769da..c9bf6808ead7 100644 --- a/tools/perf/pmu-events/arch/x86/icelakex/other.json +++ b/tools/perf/pmu-events/arch/x86/icelakex/other.json @@ -1,17 +1,5 @@ [ { - "BriefDescription": "Number of occurrences where a microcode assist is invoked by hardware.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", - "EventCode": "0xc1", - "EventName": "ASSISTS.ANY", - "PEBScounters": "0,1,2,3,4,5,6,7", - "PublicDescription": "Counts the number of occurrences where a microcode assist is invoked by hardware Examples include AD (page Access Dirty), FP and AVX related assists.", - "SampleAfterValue": "100003", - "Speculative": "1", - "UMask": "0x7" - }, - { "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the Non-AVX turbo schedule.", "CollectPEBSRecord": "2", "Counter": "0,1,2,3", @@ -139,7 +127,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -151,7 +138,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x73C000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -163,7 +149,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x104000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -175,7 +160,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x708000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -187,7 +171,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -199,7 +182,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x73C000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -211,7 +193,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x104000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -223,7 +204,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -235,7 +215,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x703C00001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -247,7 +226,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x730000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -259,7 +237,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x703000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -271,19 +248,17 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x708000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, { - "BriefDescription": "Counts demand data reads that (IC) were supplied by PMM on a distant memory controller of this socket when the system is in SNC (sub-NUMA cluster) mode.", + "BriefDescription": "Counts demand data reads that were supplied by PMM on a distant memory controller of this socket when the system is in SNC (sub-NUMA cluster) mode.", "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.SNC_PMM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x700800001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -295,7 +270,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F3FFC0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -307,7 +281,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x73C000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -319,7 +292,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x104000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -331,7 +303,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -343,7 +314,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x703C00002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -355,7 +325,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x703000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -367,19 +336,17 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x708000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, { - "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that (IC) were supplied by PMM on a distant memory controller of this socket when the system is in SNC (sub-NUMA cluster) mode.", + "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that were supplied by PMM on a distant memory controller of this socket when the system is in SNC (sub-NUMA cluster) mode.", "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_RFO.SNC_PMM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x700800002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -391,7 +358,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x73C000400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -403,7 +369,17 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x104000400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts hardware prefetch (which bring data to L2) that have any type of response.", + "Counter": "0,1,2,3", + "EventCode": "0xB7, 0xBB", + "EventName": "OCR.HWPF_L2.ANY_RESPONSE", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x10070", + "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -415,7 +391,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x12380", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -427,7 +402,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x90002380", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -439,7 +413,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x90000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -451,7 +424,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x18000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -463,7 +435,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F3FFC0477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -475,7 +446,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x73C000477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -487,7 +457,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x104000477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -499,7 +468,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100400477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -511,7 +479,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x70C000477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -523,7 +490,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x700C00477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -535,7 +501,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F33000477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -547,7 +512,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x730000477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -559,7 +523,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x703000477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -571,19 +534,17 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x708000477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, { - "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that (IC) were supplied by PMM on a distant memory controller of this socket when the system is in SNC (sub-NUMA cluster) mode.", + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by PMM on a distant memory controller of this socket when the system is in SNC (sub-NUMA cluster) mode.", "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.READS_TO_CORE.SNC_PMM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x700800477", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -595,8 +556,7 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10800", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/icelakex/pipeline.json b/tools/perf/pmu-events/arch/x86/icelakex/pipeline.json index 068a3d46b443..95c1008ef057 100644 --- a/tools/perf/pmu-events/arch/x86/icelakex/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/icelakex/pipeline.json @@ -13,6 +13,18 @@ "UMask": "0x9" }, { + "BriefDescription": "Number of occurrences where a microcode assist is invoked by hardware.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc1", + "EventName": "ASSISTS.ANY", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of occurrences where a microcode assist is invoked by hardware Examples include AD (page Access Dirty), FP and AVX related assists.", + "SampleAfterValue": "100003", + "Speculative": "1", + "UMask": "0x7" + }, + { "BriefDescription": "All branch instructions retired.", "CollectPEBSRecord": "2", "Counter": "0,1,2,3,4,5,6,7", @@ -1076,4 +1088,4 @@ "SampleAfterValue": "1000003", "UMask": "0x2" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json b/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json index 2de31c56c2a5..d89d3f8db190 100644 --- a/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json @@ -676,7 +676,7 @@ "UMask": "0x3" }, { - "BriefDescription": "Number of occurences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc.)", + "BriefDescription": "Number of occurrences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc.)", "Counter": "0,1,2,3", "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", @@ -1269,4 +1269,4 @@ "SampleAfterValue": "2000003", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/mapfile.csv b/tools/perf/pmu-events/arch/x86/mapfile.csv index 963a76fec277..f5a382421a60 100644 --- a/tools/perf/pmu-events/arch/x86/mapfile.csv +++ b/tools/perf/pmu-events/arch/x86/mapfile.csv @@ -44,6 +44,7 @@ GenuineIntel-6-86,v1,tremontx,core GenuineIntel-6-96,v1,elkhartlake,core GenuineIntel-6-97,v1,alderlake,core GenuineIntel-6-9A,v1,alderlake,core +GenuineIntel-6-8F,v1,sapphirerapids,core AuthenticAMD-23-([12][0-9A-F]|[0-9A-F]),v2,amdzen1,core AuthenticAMD-23-[[:xdigit:]]+,v1,amdzen2,core AuthenticAMD-25-[[:xdigit:]]+,v1,amdzen3,core diff --git a/tools/perf/pmu-events/arch/x86/nehalemep/other.json b/tools/perf/pmu-events/arch/x86/nehalemep/other.json index 710b106ce12a..f6887b234b0e 100644 --- a/tools/perf/pmu-events/arch/x86/nehalemep/other.json +++ b/tools/perf/pmu-events/arch/x86/nehalemep/other.json @@ -1,29 +1,5 @@ [ { - "BriefDescription": "Early Branch Prediciton Unit clears", - "Counter": "0,1,2,3", - "EventCode": "0xE8", - "EventName": "BPU_CLEARS.EARLY", - "SampleAfterValue": "2000000", - "UMask": "0x1" - }, - { - "BriefDescription": "Late Branch Prediction Unit clears", - "Counter": "0,1,2,3", - "EventCode": "0xE8", - "EventName": "BPU_CLEARS.LATE", - "SampleAfterValue": "2000000", - "UMask": "0x2" - }, - { - "BriefDescription": "Branch prediction unit missed call or return", - "Counter": "0,1,2,3", - "EventCode": "0xE5", - "EventName": "BPU_MISSED_CALL_RET", - "SampleAfterValue": "2000000", - "UMask": "0x1" - }, - { "BriefDescription": "ES segment renames", "Counter": "0,1,2,3", "EventCode": "0xD5", @@ -120,46 +96,6 @@ "UMask": "0x1" }, { - "BriefDescription": "All RAT stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.ANY", - "SampleAfterValue": "2000000", - "UMask": "0xf" - }, - { - "BriefDescription": "Flag stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.FLAGS", - "SampleAfterValue": "2000000", - "UMask": "0x1" - }, - { - "BriefDescription": "Partial register stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.REGISTERS", - "SampleAfterValue": "2000000", - "UMask": "0x2" - }, - { - "BriefDescription": "ROB read port stalls cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.ROB_READ_PORT", - "SampleAfterValue": "2000000", - "UMask": "0x4" - }, - { - "BriefDescription": "Scoreboard stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.SCOREBOARD", - "SampleAfterValue": "2000000", - "UMask": "0x8" - }, - { "BriefDescription": "All Store buffer stall cycles", "Counter": "0,1,2,3", "EventCode": "0x4", @@ -207,4 +143,4 @@ "SampleAfterValue": "2000000", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/nehalemep/pipeline.json b/tools/perf/pmu-events/arch/x86/nehalemep/pipeline.json index e64d685c128a..6fc1a6efd8e8 100644 --- a/tools/perf/pmu-events/arch/x86/nehalemep/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/nehalemep/pipeline.json @@ -51,6 +51,30 @@ "UMask": "0x1" }, { + "BriefDescription": "Early Branch Prediciton Unit clears", + "Counter": "0,1,2,3", + "EventCode": "0xE8", + "EventName": "BPU_CLEARS.EARLY", + "SampleAfterValue": "2000000", + "UMask": "0x1" + }, + { + "BriefDescription": "Late Branch Prediction Unit clears", + "Counter": "0,1,2,3", + "EventCode": "0xE8", + "EventName": "BPU_CLEARS.LATE", + "SampleAfterValue": "2000000", + "UMask": "0x2" + }, + { + "BriefDescription": "Branch prediction unit missed call or return", + "Counter": "0,1,2,3", + "EventCode": "0xE5", + "EventName": "BPU_MISSED_CALL_RET", + "SampleAfterValue": "2000000", + "UMask": "0x1" + }, + { "BriefDescription": "Branch instructions decoded", "Counter": "0,1,2,3", "EventCode": "0xE0", @@ -477,6 +501,46 @@ "UMask": "0x4" }, { + "BriefDescription": "All RAT stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.ANY", + "SampleAfterValue": "2000000", + "UMask": "0xf" + }, + { + "BriefDescription": "Flag stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.FLAGS", + "SampleAfterValue": "2000000", + "UMask": "0x1" + }, + { + "BriefDescription": "Partial register stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.REGISTERS", + "SampleAfterValue": "2000000", + "UMask": "0x2" + }, + { + "BriefDescription": "ROB read port stalls cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.ROB_READ_PORT", + "SampleAfterValue": "2000000", + "UMask": "0x4" + }, + { + "BriefDescription": "Scoreboard stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.SCOREBOARD", + "SampleAfterValue": "2000000", + "UMask": "0x8" + }, + { "BriefDescription": "Resource related stall cycles", "Counter": "0,1,2,3", "EventCode": "0xA2", @@ -878,4 +942,4 @@ "SampleAfterValue": "2000000", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/sapphirerapids/cache.json b/tools/perf/pmu-events/arch/x86/sapphirerapids/cache.json new file mode 100644 index 000000000000..373b28348b57 --- /dev/null +++ b/tools/perf/pmu-events/arch/x86/sapphirerapids/cache.json @@ -0,0 +1,1083 @@ +[ + { + "BriefDescription": "Counts the number of cache lines replaced in L1 data cache.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x51", + "EventName": "L1D.REPLACEMENT", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts L1D data line replacements including opportunistic replacements, and replacements that require stall-for-replace or block-for-replace.", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Number of cycles a demand request has waited due to L1D Fill Buffer (FB) unavailability.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x48", + "EventName": "L1D_PEND_MISS.FB_FULL", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts number of cycles a demand request has waited due to L1D Fill Buffer (FB) unavailablability. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.", + "SampleAfterValue": "1000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Number of phases a demand request has waited due to L1D Fill Buffer (FB) unavailablability.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EdgeDetect": "1", + "EventCode": "0x48", + "EventName": "L1D_PEND_MISS.FB_FULL_PERIODS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts number of phases a demand request has waited due to L1D Fill Buffer (FB) unavailablability. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.", + "SampleAfterValue": "1000003", + "UMask": "0x2" + }, + { + "BriefDescription": "This event is deprecated. Refer to new event L1D_PEND_MISS.L2_STALLS", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x48", + "EventName": "L1D_PEND_MISS.L2_STALL", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x4" + }, + { + "BriefDescription": "Number of cycles a demand request has waited due to L1D due to lack of L2 resources.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x48", + "EventName": "L1D_PEND_MISS.L2_STALLS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts number of cycles a demand request has waited due to L1D due to lack of L2 resources. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.", + "SampleAfterValue": "1000003", + "UMask": "0x4" + }, + { + "BriefDescription": "Number of L1D misses that are outstanding", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x48", + "EventName": "L1D_PEND_MISS.PENDING", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts number of L1D misses that are outstanding in each cycle, that is each cycle the number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch. Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.", + "SampleAfterValue": "1000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Cycles with L1D load Misses outstanding.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EventCode": "0x48", + "EventName": "L1D_PEND_MISS.PENDING_CYCLES", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts duration of L1D miss outstanding in cycles.", + "SampleAfterValue": "1000003", + "UMask": "0x1" + }, + { + "BriefDescription": "L2 cache lines filling L2", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x25", + "EventName": "L2_LINES_IN.ALL", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of L2 cache lines filling the L2. Counting does not cover rejects.", + "SampleAfterValue": "100003", + "UMask": "0x1f" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x26", + "EventName": "L2_LINES_OUT.NON_SILENT", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "200003", + "UMask": "0x2" + }, + { + "BriefDescription": "Non-modified cache lines that are silently dropped by L2 cache when triggered by an L2 cache fill.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x26", + "EventName": "L2_LINES_OUT.SILENT", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared or Exclusive state. A non-threaded event.", + "SampleAfterValue": "200003", + "UMask": "0x1" + }, + { + "BriefDescription": "All L2 requests.[This event is alias to L2_RQSTS.REFERENCES]", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_REQUEST.ALL", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts all L2 requests.[This event is alias to L2_RQSTS.REFERENCES]", + "SampleAfterValue": "200003", + "UMask": "0xff" + }, + { + "BriefDescription": "Read requests with true-miss in L2 cache.[This event is alias to L2_RQSTS.MISS]", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_REQUEST.MISS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts read requests of any type with true-miss in the L2 cache. True-miss excludes L2 misses that were merged with ongoing L2 misses.[This event is alias to L2_RQSTS.MISS]", + "SampleAfterValue": "200003", + "UMask": "0x3f" + }, + { + "BriefDescription": "L2 code requests", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.ALL_CODE_RD", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the total number of L2 code requests.", + "SampleAfterValue": "200003", + "UMask": "0xe4" + }, + { + "BriefDescription": "Demand Data Read requests", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of demand Data Read requests (including requests from L1D hardware prefetchers). These loads may hit or miss L2 cache. Only non rejected loads are counted.", + "SampleAfterValue": "200003", + "UMask": "0xe1" + }, + { + "BriefDescription": "Demand requests that miss L2 cache", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.ALL_DEMAND_MISS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts demand requests that miss L2 cache.", + "SampleAfterValue": "200003", + "UMask": "0x27" + }, + { + "BriefDescription": "Demand requests to L2 cache", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.ALL_DEMAND_REFERENCES", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts demand requests to L2 cache.", + "SampleAfterValue": "200003", + "UMask": "0xe7" + }, + { + "BriefDescription": "RFO requests to L2 cache", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.ALL_RFO", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the total number of RFO (read for ownership) requests to L2 cache. L2 RFO requests include both L1D demand RFO misses as well as L1D RFO prefetches.", + "SampleAfterValue": "200003", + "UMask": "0xe2" + }, + { + "BriefDescription": "L2 cache hits when fetching instructions, code reads.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.CODE_RD_HIT", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.", + "SampleAfterValue": "200003", + "UMask": "0xc4" + }, + { + "BriefDescription": "L2 cache misses when fetching instructions", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.CODE_RD_MISS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts L2 cache misses when fetching instructions.", + "SampleAfterValue": "200003", + "UMask": "0x24" + }, + { + "BriefDescription": "Demand Data Read requests that hit L2 cache", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of demand Data Read requests initiated by load instructions that hit L2 cache.", + "SampleAfterValue": "200003", + "UMask": "0xc1" + }, + { + "BriefDescription": "Demand Data Read miss L2, no rejects", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of demand Data Read requests that miss L2 cache. Only not rejected loads are counted.", + "SampleAfterValue": "200003", + "UMask": "0x21" + }, + { + "BriefDescription": "Read requests with true-miss in L2 cache.[This event is alias to L2_REQUEST.MISS]", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.MISS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts read requests of any type with true-miss in the L2 cache. True-miss excludes L2 misses that were merged with ongoing L2 misses.[This event is alias to L2_REQUEST.MISS]", + "SampleAfterValue": "200003", + "UMask": "0x3f" + }, + { + "BriefDescription": "All L2 requests.[This event is alias to L2_REQUEST.ALL]", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.REFERENCES", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts all L2 requests.[This event is alias to L2_REQUEST.ALL]", + "SampleAfterValue": "200003", + "UMask": "0xff" + }, + { + "BriefDescription": "RFO requests that hit L2 cache", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.RFO_HIT", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.", + "SampleAfterValue": "200003", + "UMask": "0xc2" + }, + { + "BriefDescription": "RFO requests that miss L2 cache", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.RFO_MISS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that miss L2 cache.", + "SampleAfterValue": "200003", + "UMask": "0x22" + }, + { + "BriefDescription": "SW prefetch requests that hit L2 cache.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.SWPF_HIT", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts Software prefetch requests that hit the L2 cache. Accounts for PREFETCHNTA and PREFETCHT0/1/2 instructions when FB is not full.", + "SampleAfterValue": "200003", + "UMask": "0xc8" + }, + { + "BriefDescription": "SW prefetch requests that miss L2 cache.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x24", + "EventName": "L2_RQSTS.SWPF_MISS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts Software prefetch requests that miss the L2 cache. Accounts for PREFETCHNTA and PREFETCHT0/1/2 instructions when FB is not full.", + "SampleAfterValue": "200003", + "UMask": "0x28" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0x2e", + "EventName": "LONGEST_LAT_CACHE.MISS", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "100003", + "UMask": "0x41" + }, + { + "BriefDescription": "All retired load instructions.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd0", + "EventName": "MEM_INST_RETIRED.ALL_LOADS", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts all retired load instructions. This event accounts for SW prefetch instructions for loads.", + "SampleAfterValue": "1000003", + "UMask": "0x81" + }, + { + "BriefDescription": "All retired store instructions.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd0", + "EventName": "MEM_INST_RETIRED.ALL_STORES", + "L1_Hit_Indication": "1", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts all retired store instructions. This event account for SW prefetch instructions and PREFETCHW instruction for stores.", + "SampleAfterValue": "1000003", + "UMask": "0x82" + }, + { + "BriefDescription": "All retired memory instructions.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd0", + "EventName": "MEM_INST_RETIRED.ANY", + "L1_Hit_Indication": "1", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts all retired memory instructions - loads and stores.", + "SampleAfterValue": "1000003", + "UMask": "0x83" + }, + { + "BriefDescription": "Retired load instructions with locked access.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd0", + "EventName": "MEM_INST_RETIRED.LOCK_LOADS", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions with locked access.", + "SampleAfterValue": "100007", + "UMask": "0x21" + }, + { + "BriefDescription": "Retired load instructions that split across a cacheline boundary.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd0", + "EventName": "MEM_INST_RETIRED.SPLIT_LOADS", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions that split across a cacheline boundary.", + "SampleAfterValue": "100003", + "UMask": "0x41" + }, + { + "BriefDescription": "Retired store instructions that split across a cacheline boundary.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd0", + "EventName": "MEM_INST_RETIRED.SPLIT_STORES", + "L1_Hit_Indication": "1", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired store instructions that split across a cacheline boundary.", + "SampleAfterValue": "100003", + "UMask": "0x42" + }, + { + "BriefDescription": "Retired load instructions that miss the STLB.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd0", + "EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Number of retired load instructions that (start a) miss in the 2nd-level TLB (STLB).", + "SampleAfterValue": "100003", + "UMask": "0x11" + }, + { + "BriefDescription": "Retired store instructions that miss the STLB.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd0", + "EventName": "MEM_INST_RETIRED.STLB_MISS_STORES", + "L1_Hit_Indication": "1", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Number of retired store instructions that (start a) miss in the 2nd-level TLB (STLB).", + "SampleAfterValue": "100003", + "UMask": "0x12" + }, + { + "BriefDescription": "Completed demand load uops that miss the L1 d-cache.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x43", + "EventName": "MEM_LOAD_COMPLETED.L1_MISS_ANY", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Number of completed demand load requests that missed the L1 data cache including shadow misses (FB hits, merge to an ongoing L1D miss)", + "SampleAfterValue": "1000003", + "UMask": "0xfd" + }, + { + "BriefDescription": "Retired load instructions whose data sources were HitM responses from shared L3", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd2", + "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_FWD", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions whose data sources were HitM responses from shared L3.", + "SampleAfterValue": "20011", + "UMask": "0x4" + }, + { + "BriefDescription": "Retired load instructions whose data sources were L3 hit and cross-core snoop missed in on-pkg core cache.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd2", + "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the retired load instructions whose data sources were L3 hit and cross-core snoop missed in on-pkg core cache.", + "SampleAfterValue": "20011", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired load instructions whose data sources were hits in L3 without snoops required", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd2", + "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NONE", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions whose data sources were hits in L3 without snoops required.", + "SampleAfterValue": "100003", + "UMask": "0x8" + }, + { + "BriefDescription": "Retired load instructions whose data sources were L3 and cross-core snoop hits in on-pkg core cache", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd2", + "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NO_FWD", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions whose data sources were L3 and cross-core snoop hits in on-pkg core cache.", + "SampleAfterValue": "20011", + "UMask": "0x2" + }, + { + "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from local dram", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd3", + "EventName": "MEM_LOAD_L3_MISS_RETIRED.LOCAL_DRAM", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Retired load instructions which data sources missed L3 but serviced from local DRAM.", + "SampleAfterValue": "100007", + "UMask": "0x1" + }, + { + "BriefDescription": "TBD", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd3", + "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_DRAM", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Retired load instructions whose data sources was forwarded from a remote cache", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd3", + "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_FWD", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Retired load instructions whose data sources was forwarded from a remote cache.", + "SampleAfterValue": "100007", + "UMask": "0x8" + }, + { + "BriefDescription": "TBD", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd3", + "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_HITM", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x4" + }, + { + "BriefDescription": "Retired load instructions with remote Intel Optane DC persistent memory as the data source where the data request missed all caches.", + "Counter": "0,1,2,3", + "EventCode": "0xd3", + "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_PMM", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions with remote Intel Optane DC persistent memory as the data source and the data request missed L3.", + "SampleAfterValue": "100007", + "UMask": "0x10" + }, + { + "BriefDescription": "Retired instructions with at least 1 uncacheable load or lock.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd4", + "EventName": "MEM_LOAD_MISC_RETIRED.UC", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Retired instructions with at least one load to uncacheable memory-type, or at least one cache-line split locked access (Bus Lock).", + "SampleAfterValue": "100007", + "UMask": "0x4" + }, + { + "BriefDescription": "Number of completed demand load requests that missed the L1, but hit the FB(fill buffer), because a preceding miss to the same cacheline initiated the line to be brought into L1, but data is not yet ready in L1.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd1", + "EventName": "MEM_LOAD_RETIRED.FB_HIT", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.", + "SampleAfterValue": "100007", + "UMask": "0x40" + }, + { + "BriefDescription": "Retired load instructions with L1 cache hits as data sources", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd1", + "EventName": "MEM_LOAD_RETIRED.L1_HIT", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.", + "SampleAfterValue": "1000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired load instructions missed L1 cache as data sources", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd1", + "EventName": "MEM_LOAD_RETIRED.L1_MISS", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L1 cache.", + "SampleAfterValue": "200003", + "UMask": "0x8" + }, + { + "BriefDescription": "Retired load instructions with L2 cache hits as data sources", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd1", + "EventName": "MEM_LOAD_RETIRED.L2_HIT", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions with L2 cache hits as data sources.", + "SampleAfterValue": "200003", + "UMask": "0x2" + }, + { + "BriefDescription": "Retired load instructions missed L2 cache as data sources", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd1", + "EventName": "MEM_LOAD_RETIRED.L2_MISS", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions missed L2 cache as data sources.", + "SampleAfterValue": "100021", + "UMask": "0x10" + }, + { + "BriefDescription": "Retired load instructions with L3 cache hits as data sources", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd1", + "EventName": "MEM_LOAD_RETIRED.L3_HIT", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L3 cache.", + "SampleAfterValue": "100021", + "UMask": "0x4" + }, + { + "BriefDescription": "Retired load instructions missed L3 cache as data sources", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd1", + "EventName": "MEM_LOAD_RETIRED.L3_MISS", + "PEBS": "1", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L3 cache.", + "SampleAfterValue": "50021", + "UMask": "0x20" + }, + { + "BriefDescription": "Retired load instructions with local Intel Optane DC persistent memory as the data source where the data request missed all caches.", + "Counter": "0,1,2,3", + "Data_LA": "1", + "EventCode": "0xd1", + "EventName": "MEM_LOAD_RETIRED.LOCAL_PMM", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts retired load instructions with local Intel Optane DC persistent memory as the data source and the data request missed L3.", + "SampleAfterValue": "1000003", + "UMask": "0x80" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x44", + "EventName": "MEM_STORE_RETIRED.L2_HIT", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "200003", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired memory uops for any access", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xe5", + "EventName": "MEM_UOP_RETIRED.ANY", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of retired micro-operations (uops) for load or store memory accesses", + "SampleAfterValue": "1000003", + "UMask": "0x3" + }, + { + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that hit in the L3 or were snooped from another core's caches on the same socket.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_CODE_RD.L3_HIT", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x3F803C0004", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that resulted in a snoop hit a modified line in another core's caches which forwarded the data.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HITM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x10003C0004", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that hit a modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_CODE_RD.SNC_CACHE.HITM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x1008000004", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that either hit a non-modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_CODE_RD.SNC_CACHE.HIT_WITH_FWD", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x808000004", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that hit in the L3 or were snooped from another core's caches on the same socket.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.L3_HIT", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x3F803C0001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that resulted in a snoop hit a modified line in another core's caches which forwarded the data.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x10003C0001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that resulted in a snoop that hit in another core, which did not forward the data.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x4003C0001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that resulted in a snoop hit in another core's caches which forwarded the unmodified data to the requesting core.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x8003C0001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that were supplied by a cache on a remote socket where a snoop hit a modified line in another core's caches which forwarded the data.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.REMOTE_CACHE.SNOOP_HITM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x1030000001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that were supplied by a cache on a remote socket where a snoop hit in another core's caches which forwarded the unmodified data to the requesting core.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.REMOTE_CACHE.SNOOP_HIT_WITH_FWD", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x830000001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that hit a modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.SNC_CACHE.HITM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x1008000001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that either hit a non-modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.SNC_CACHE.HIT_WITH_FWD", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x808000001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that hit in the L3 or were snooped from another core's caches on the same socket.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_RFO.L3_HIT", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x3F803C0002", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that resulted in a snoop hit a modified line in another core's caches which forwarded the data.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HITM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x10003C0002", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that hit a modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_RFO.SNC_CACHE.HITM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x1008000002", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that either hit a non-modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_RFO.SNC_CACHE.HIT_WITH_FWD", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x808000002", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts hardware prefetches to the L3 only that hit in the L3 or were snooped from another core's caches on the same socket.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.HWPF_L3.L3_HIT", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x80082380", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that hit in the L3 or were snooped from another core's caches on the same socket.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.L3_HIT", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x3F003C4477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that resulted in a snoop hit a modified line in another core's caches which forwarded the data.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_HITM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x10003C4477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that resulted in a snoop that hit in another core, which did not forward the data.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x4003C4477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that resulted in a snoop hit in another core's caches which forwarded the unmodified data to the requesting core.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_HIT_WITH_FWD", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x8003C4477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by a cache on a remote socket where a snoop was sent and data was returned (Modified or Not Modified).", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.REMOTE_CACHE.SNOOP_FWD", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x1830004477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by a cache on a remote socket where a snoop hit a modified line in another core's caches which forwarded the data.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.REMOTE_CACHE.SNOOP_HITM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x1030004477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by a cache on a remote socket where a snoop hit in another core's caches which forwarded the unmodified data to the requesting core.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.REMOTE_CACHE.SNOOP_HIT_WITH_FWD", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x830004477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that hit a modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.SNC_CACHE.HITM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x1008004477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that either hit a non-modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.SNC_CACHE.HIT_WITH_FWD", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x808004477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts streaming stores that hit in the L3 or were snooped from another core's caches on the same socket.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.STREAMING_WR.L3_HIT", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x80080800", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x21", + "EventName": "OFFCORE_REQUESTS.ALL_REQUESTS", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "100003", + "UMask": "0x80" + }, + { + "BriefDescription": "Demand and prefetch data reads", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x21", + "EventName": "OFFCORE_REQUESTS.DATA_RD", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the demand and prefetch data reads. All Core Data Reads include cacheable 'Demands' and L2 prefetchers (not L3 prefetchers). Counting also covers reads due to page walks resulted from any request type.", + "SampleAfterValue": "100003", + "UMask": "0x8" + }, + { + "BriefDescription": "Demand Data Read requests sent to uncore", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x21", + "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the Demand Data Read requests sent to uncore. Use it in conjunction with OFFCORE_REQUESTS_OUTSTANDING to determine average latency in the uncore.", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "This event is deprecated. Refer to new event OFFCORE_REQUESTS_OUTSTANDING.DATA_RD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x20", + "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x8" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EventCode": "0x20", + "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x8" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EventCode": "0x20", + "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x4" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x20", + "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DATA_RD", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x8" + }, + { + "BriefDescription": "Number of PREFETCHNTA instructions executed.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x40", + "EventName": "SW_PREFETCH_ACCESS.NTA", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of PREFETCHNTA instructions executed.", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Number of PREFETCHW instructions executed.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x40", + "EventName": "SW_PREFETCH_ACCESS.PREFETCHW", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of PREFETCHW instructions executed.", + "SampleAfterValue": "100003", + "UMask": "0x8" + }, + { + "BriefDescription": "Number of PREFETCHT0 instructions executed.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x40", + "EventName": "SW_PREFETCH_ACCESS.T0", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of PREFETCHT0 instructions executed.", + "SampleAfterValue": "100003", + "UMask": "0x2" + }, + { + "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x40", + "EventName": "SW_PREFETCH_ACCESS.T1_T2", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of PREFETCHT1 or PREFETCHT2 instructions executed.", + "SampleAfterValue": "100003", + "UMask": "0x4" + } +] diff --git a/tools/perf/pmu-events/arch/x86/sapphirerapids/floating-point.json b/tools/perf/pmu-events/arch/x86/sapphirerapids/floating-point.json new file mode 100644 index 000000000000..1281f293ca41 --- /dev/null +++ b/tools/perf/pmu-events/arch/x86/sapphirerapids/floating-point.json @@ -0,0 +1,218 @@ +[ + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xb0", + "EventName": "ARITH.FPDIV_ACTIVE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all microcode FP assists.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc1", + "EventName": "ASSISTS.FP", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts all microcode Floating Point assists.", + "SampleAfterValue": "100003", + "UMask": "0x2" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc1", + "EventName": "ASSISTS.SSE_AVX_MIX", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x10" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb3", + "EventName": "FP_ARITH_DISPATCHED.PORT_0", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb3", + "EventName": "FP_ARITH_DISPATCHED.PORT_1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb3", + "EventName": "FP_ARITH_DISPATCHED.PORT_5", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x4" + }, + { + "BriefDescription": "Counts number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc7", + "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", + "SampleAfterValue": "100003", + "UMask": "0x4" + }, + { + "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc7", + "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", + "SampleAfterValue": "100003", + "UMask": "0x8" + }, + { + "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc7", + "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", + "SampleAfterValue": "100003", + "UMask": "0x10" + }, + { + "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc7", + "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", + "SampleAfterValue": "100003", + "UMask": "0x20" + }, + { + "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc7", + "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", + "SampleAfterValue": "100003", + "UMask": "0x40" + }, + { + "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc7", + "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", + "SampleAfterValue": "100003", + "UMask": "0x80" + }, + { + "BriefDescription": "Counts number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc7", + "EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc7", + "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", + "SampleAfterValue": "100003", + "UMask": "0x2" + }, + { + "BriefDescription": "TBD", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xcf", + "EventName": "FP_ARITH_INST_RETIRED2.128B_PACKED_HALF", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "100003", + "UMask": "0x4" + }, + { + "BriefDescription": "TBD", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xcf", + "EventName": "FP_ARITH_INST_RETIRED2.256B_PACKED_HALF", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "100003", + "UMask": "0x8" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xcf", + "EventName": "FP_ARITH_INST_RETIRED2.512B_PACKED_HALF", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "100003", + "UMask": "0x10" + }, + { + "BriefDescription": "TBD", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xcf", + "EventName": "FP_ARITH_INST_RETIRED2.COMPLEX_SCALAR_HALF", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "100003", + "UMask": "0x2" + }, + { + "BriefDescription": "Number of all Scalar Half-Precision FP arithmetic instructions(1) retired - regular and complex.", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xcf", + "EventName": "FP_ARITH_INST_RETIRED2.SCALAR", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "TBD", + "SampleAfterValue": "100003", + "UMask": "0x3" + }, + { + "BriefDescription": "TBD", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xcf", + "EventName": "FP_ARITH_INST_RETIRED2.SCALAR_HALF", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Number of all Vector (also called packed) Half-Precision FP arithmetic instructions(1) retired.", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xcf", + "EventName": "FP_ARITH_INST_RETIRED2.VECTOR", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "TBD", + "SampleAfterValue": "100003", + "UMask": "0x1c" + } +] diff --git a/tools/perf/pmu-events/arch/x86/sapphirerapids/frontend.json b/tools/perf/pmu-events/arch/x86/sapphirerapids/frontend.json new file mode 100644 index 000000000000..3b6fb14fc421 --- /dev/null +++ b/tools/perf/pmu-events/arch/x86/sapphirerapids/frontend.json @@ -0,0 +1,471 @@ +[ + { + "BriefDescription": "Stalls caused by changing prefix length of the instruction.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x87", + "EventName": "DECODE.LCP", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts cycles that the Instruction Length decoder (ILD) stalls occurred due to dynamically changing prefix length of the decoded instruction (by operand size prefix instruction 0x66, address size prefix instruction 0x67 or REX.W for Intel64). Count is proportional to the number of prefixes in a 16B-line. This may result in a three-cycle penalty for each LCP (Length changing prefix) in a 16-byte chunk.", + "SampleAfterValue": "500009", + "UMask": "0x1" + }, + { + "BriefDescription": "DSB-to-MITE switch true penalty cycles.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x61", + "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Decode Stream Buffer (DSB) is a Uop-cache that holds translations of previously fetched instructions that were decoded by the legacy x86 decode pipeline (MITE). This event counts fetch penalty cycles when a transition occurs from DSB to MITE.", + "SampleAfterValue": "100003", + "UMask": "0x2" + }, + { + "BriefDescription": "Retired Instructions who experienced DSB miss.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.ANY_DSB_MISS", + "MSRIndex": "0x3F7", + "MSRValue": "0x1", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired Instructions who experienced a critical DSB miss.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.DSB_MISS", + "MSRIndex": "0x3F7", + "MSRValue": "0x11", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of retired Instructions that experienced a critical DSB (Decode stream buffer i.e. the decoded instruction-cache) miss. Critical means stalls were exposed to the back-end as a result of the DSB miss.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired Instructions who experienced iTLB true miss.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.ITLB_MISS", + "MSRIndex": "0x3F7", + "MSRValue": "0x14", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired Instructions that experienced iTLB (Instruction TLB) true miss.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.L1I_MISS", + "MSRIndex": "0x3F7", + "MSRValue": "0x12", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired Instructions who experienced Instruction L1 Cache true miss.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.L2_MISS", + "MSRIndex": "0x3F7", + "MSRValue": "0x13", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired Instructions who experienced Instruction L2 Cache true miss.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired instructions after front-end starvation of at least 1 cycle", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_1", + "MSRIndex": "0x3F7", + "MSRValue": "0x600106", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of at least 1 cycle which was not interrupted by a back-end stall.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_128", + "MSRIndex": "0x3F7", + "MSRValue": "0x608006", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_16", + "MSRIndex": "0x3F7", + "MSRValue": "0x601006", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired instructions after front-end starvation of at least 2 cycles", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_2", + "MSRIndex": "0x3F7", + "MSRValue": "0x600206", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of at least 2 cycles which was not interrupted by a back-end stall.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_256", + "MSRIndex": "0x3F7", + "MSRValue": "0x610006", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_1", + "MSRIndex": "0x3F7", + "MSRValue": "0x100206", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_32", + "MSRIndex": "0x3F7", + "MSRValue": "0x602006", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_4", + "MSRIndex": "0x3F7", + "MSRValue": "0x600406", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_512", + "MSRIndex": "0x3F7", + "MSRValue": "0x620006", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_64", + "MSRIndex": "0x3F7", + "MSRValue": "0x604006", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 8 cycles which was not interrupted by a back-end stall.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_8", + "MSRIndex": "0x3F7", + "MSRValue": "0x600806", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.MS_FLOWS", + "MSRIndex": "0x3F7", + "MSRValue": "0x8", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.STLB_MISS", + "MSRIndex": "0x3F7", + "MSRValue": "0x15", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired Instructions that experienced STLB (2nd level TLB) true miss.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc6", + "EventName": "FRONTEND_RETIRED.UNKNOWN_BRANCH", + "MSRIndex": "0x3F7", + "MSRValue": "0x17", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache miss.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x80", + "EventName": "ICACHE_DATA.STALLS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts cycles where a code line fetch is stalled due to an L1 instruction cache miss. The decode pipeline works at a 32 Byte granularity.", + "SampleAfterValue": "500009", + "UMask": "0x4" + }, + { + "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache tag miss.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x83", + "EventName": "ICACHE_TAG.STALLS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts cycles where a code fetch is stalled due to L1 instruction cache tag miss.", + "SampleAfterValue": "200003", + "UMask": "0x4" + }, + { + "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EventCode": "0x79", + "EventName": "IDQ.DSB_CYCLES_ANY", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of cycles uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path.", + "SampleAfterValue": "2000003", + "UMask": "0x8" + }, + { + "BriefDescription": "Cycles DSB is delivering optimal number of Uops", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "6", + "EventCode": "0x79", + "EventName": "IDQ.DSB_CYCLES_OK", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of cycles where optimal number of uops was delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).", + "SampleAfterValue": "2000003", + "UMask": "0x8" + }, + { + "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x79", + "EventName": "IDQ.DSB_UOPS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path.", + "SampleAfterValue": "2000003", + "UMask": "0x8" + }, + { + "BriefDescription": "Cycles MITE is delivering any Uop", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EventCode": "0x79", + "EventName": "IDQ.MITE_CYCLES_ANY", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of cycles uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).", + "SampleAfterValue": "2000003", + "UMask": "0x4" + }, + { + "BriefDescription": "Cycles MITE is delivering optimal number of Uops", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "6", + "EventCode": "0x79", + "EventName": "IDQ.MITE_CYCLES_OK", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of cycles where optimal number of uops was delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).", + "SampleAfterValue": "2000003", + "UMask": "0x4" + }, + { + "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x79", + "EventName": "IDQ.MITE_UOPS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).", + "SampleAfterValue": "2000003", + "UMask": "0x4" + }, + { + "BriefDescription": "Cycles when uops are being delivered to IDQ while MS is busy", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EventCode": "0x79", + "EventName": "IDQ.MS_CYCLES_ANY", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.", + "SampleAfterValue": "2000003", + "UMask": "0x20" + }, + { + "BriefDescription": "Number of switches from DSB or MITE to the MS", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EdgeDetect": "1", + "EventCode": "0x79", + "EventName": "IDQ.MS_SWITCHES", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.", + "SampleAfterValue": "100003", + "UMask": "0x20" + }, + { + "BriefDescription": "Uops delivered to IDQ while MS is busy", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x79", + "EventName": "IDQ.MS_UOPS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the total number of uops delivered by the Microcode Sequencer (MS).", + "SampleAfterValue": "1000003", + "UMask": "0x20" + }, + { + "BriefDescription": "Uops not delivered by IDQ when backend of the machine is not stalled", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0x9c", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of uops not delivered to by the Instruction Decode Queue (IDQ) to the back-end of the pipeline when there was no back-end stalls. This event counts for one SMT thread in a given cycle.", + "SampleAfterValue": "1000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Cycles when no uops are not delivered by the IDQ when backend of the machine is not stalled", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "6", + "EventCode": "0x9c", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of cycles when no uops were delivered by the Instruction Decode Queue (IDQ) to the back-end of the pipeline when there was no back-end stalls. This event counts for one SMT thread in a given cycle.", + "SampleAfterValue": "1000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Cycles when optimal number of uops was delivered to the back-end when the back-end is not stalled", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0x9c", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK", + "Invert": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of cycles when the optimal number of uops were delivered by the Instruction Decode Queue (IDQ) to the back-end of the pipeline when there was no back-end stalls. This event counts for one SMT thread in a given cycle.", + "SampleAfterValue": "1000003", + "UMask": "0x1" + } +] diff --git a/tools/perf/pmu-events/arch/x86/sapphirerapids/memory.json b/tools/perf/pmu-events/arch/x86/sapphirerapids/memory.json new file mode 100644 index 000000000000..4c385d05a0c7 --- /dev/null +++ b/tools/perf/pmu-events/arch/x86/sapphirerapids/memory.json @@ -0,0 +1,415 @@ +[ + { + "BriefDescription": "Execution stalls while L3 cache miss demand load is outstanding.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "6", + "EventCode": "0xa3", + "EventName": "CYCLE_ACTIVITY.STALLS_L3_MISS", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x6" + }, + { + "BriefDescription": "Number of machine clears due to memory ordering conflicts.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc3", + "EventName": "MACHINE_CLEARS.MEMORY_ORDERING", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of Machine Clears detected dye to memory ordering. Memory Ordering Machine Clears may apply when a memory read may not conform to the memory ordering rules of the x86 architecture", + "SampleAfterValue": "100003", + "UMask": "0x2" + }, + { + "BriefDescription": "Cycles while L1 cache miss demand load is outstanding.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "2", + "EventCode": "0x47", + "EventName": "MEMORY_ACTIVITY.CYCLES_L1D_MISS", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Execution stalls while L1 cache miss demand load is outstanding.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "3", + "EventCode": "0x47", + "EventName": "MEMORY_ACTIVITY.STALLS_L1D_MISS", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x3" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "5", + "EventCode": "0x47", + "EventName": "MEMORY_ACTIVITY.STALLS_L2_MISS", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x5" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "9", + "EventCode": "0x47", + "EventName": "MEMORY_ACTIVITY.STALLS_L3_MISS", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x9" + }, + { + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.", + "CollectPEBSRecord": "2", + "Counter": "1,2,3,4,5,6,7", + "Data_LA": "1", + "EventCode": "0xcd", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128", + "MSRIndex": "0x3F6", + "MSRValue": "0x80", + "PEBS": "2", + "PEBScounters": "1,2,3,4,5,6,7", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles. Reported latency may be longer than just the memory latency.", + "SampleAfterValue": "1009", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.", + "CollectPEBSRecord": "2", + "Counter": "1,2,3,4,5,6,7", + "Data_LA": "1", + "EventCode": "0xcd", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16", + "MSRIndex": "0x3F6", + "MSRValue": "0x10", + "PEBS": "2", + "PEBScounters": "1,2,3,4,5,6,7", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles. Reported latency may be longer than just the memory latency.", + "SampleAfterValue": "20011", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.", + "CollectPEBSRecord": "2", + "Counter": "1,2,3,4,5,6,7", + "Data_LA": "1", + "EventCode": "0xcd", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256", + "MSRIndex": "0x3F6", + "MSRValue": "0x100", + "PEBS": "2", + "PEBScounters": "1,2,3,4,5,6,7", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles. Reported latency may be longer than just the memory latency.", + "SampleAfterValue": "503", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.", + "CollectPEBSRecord": "2", + "Counter": "1,2,3,4,5,6,7", + "Data_LA": "1", + "EventCode": "0xcd", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32", + "MSRIndex": "0x3F6", + "MSRValue": "0x20", + "PEBS": "2", + "PEBScounters": "1,2,3,4,5,6,7", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles. Reported latency may be longer than just the memory latency.", + "SampleAfterValue": "100007", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.", + "CollectPEBSRecord": "2", + "Counter": "1,2,3,4,5,6,7", + "Data_LA": "1", + "EventCode": "0xcd", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4", + "MSRIndex": "0x3F6", + "MSRValue": "0x4", + "PEBS": "2", + "PEBScounters": "1,2,3,4,5,6,7", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles. Reported latency may be longer than just the memory latency.", + "SampleAfterValue": "100003", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.", + "CollectPEBSRecord": "2", + "Counter": "1,2,3,4,5,6,7", + "Data_LA": "1", + "EventCode": "0xcd", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512", + "MSRIndex": "0x3F6", + "MSRValue": "0x200", + "PEBS": "2", + "PEBScounters": "1,2,3,4,5,6,7", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles. Reported latency may be longer than just the memory latency.", + "SampleAfterValue": "101", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.", + "CollectPEBSRecord": "2", + "Counter": "1,2,3,4,5,6,7", + "Data_LA": "1", + "EventCode": "0xcd", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64", + "MSRIndex": "0x3F6", + "MSRValue": "0x40", + "PEBS": "2", + "PEBScounters": "1,2,3,4,5,6,7", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles. Reported latency may be longer than just the memory latency.", + "SampleAfterValue": "2003", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.", + "CollectPEBSRecord": "2", + "Counter": "1,2,3,4,5,6,7", + "Data_LA": "1", + "EventCode": "0xcd", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8", + "MSRIndex": "0x3F6", + "MSRValue": "0x8", + "PEBS": "2", + "PEBScounters": "1,2,3,4,5,6,7", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles. Reported latency may be longer than just the memory latency.", + "SampleAfterValue": "50021", + "TakenAlone": "1", + "UMask": "0x1" + }, + { + "BriefDescription": "Retired instructions with at least 1 store uop. This PEBS event is the trigger for stores sampled by the PEBS Store Facility.", + "CollectPEBSRecord": "2", + "Data_LA": "1", + "EventCode": "0xcd", + "EventName": "MEM_TRANS_RETIRED.STORE_SAMPLE", + "PEBS": "2", + "SampleAfterValue": "1000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were not supplied by the local socket's L1, L2, or L3 caches.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_CODE_RD.L3_MISS", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x3FBFC00004", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that were not supplied by the local socket's L1, L2, or L3 caches.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.L3_MISS", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x3FBFC00001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that were not supplied by the local socket's L1, L2, or L3 caches.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_RFO.L3_MISS", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x3F3FC00002", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts hardware prefetches to the L3 only that missed the local socket's L1, L2, and L3 caches.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.HWPF_L3.L3_MISS", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x94002380", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts hardware prefetches to the L3 only that were not supplied by the local socket's L1, L2, or L3 caches and the cacheline is homed locally.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.HWPF_L3.L3_MISS_LOCAL", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x84002380", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were not supplied by the local socket's L1, L2, or L3 caches.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.L3_MISS", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x3F3FC04477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that missed the L3 Cache and were supplied by the local socket (DRAM or PMM), whether or not in Sub NUMA Cluster(SNC) Mode. In SNC Mode counts PMM or DRAM accesses that are controlled by the close or distant SNC Cluster. It does not count misses to the L3 which go to Local CXL Type 2 Memory or Local Non DRAM.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.L3_MISS_LOCAL_SOCKET", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x70CC04477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts streaming stores that missed the local socket's L1, L2, and L3 caches.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.STREAMING_WR.L3_MISS", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x94000800", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts streaming stores that were not supplied by the local socket's L1, L2, or L3 caches and the cacheline is homed locally.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.STREAMING_WR.L3_MISS_LOCAL", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x84000800", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Number of times an RTM execution aborted.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc9", + "EventName": "RTM_RETIRED.ABORTED", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of times RTM abort was triggered.", + "SampleAfterValue": "100003", + "UMask": "0x4" + }, + { + "BriefDescription": "Number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt)", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc9", + "EventName": "RTM_RETIRED.ABORTED_EVENTS", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt).", + "SampleAfterValue": "100003", + "UMask": "0x80" + }, + { + "BriefDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts)", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc9", + "EventName": "RTM_RETIRED.ABORTED_MEM", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts).", + "SampleAfterValue": "100003", + "UMask": "0x8" + }, + { + "BriefDescription": "Number of times an RTM execution aborted due to incompatible memory type", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc9", + "EventName": "RTM_RETIRED.ABORTED_MEMTYPE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of times an RTM execution aborted due to incompatible memory type.", + "SampleAfterValue": "100003", + "UMask": "0x40" + }, + { + "BriefDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc9", + "EventName": "RTM_RETIRED.ABORTED_UNFRIENDLY", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of times an RTM execution aborted due to HLE-unfriendly instructions.", + "SampleAfterValue": "100003", + "UMask": "0x20" + }, + { + "BriefDescription": "Number of times an RTM execution successfully committed", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc9", + "EventName": "RTM_RETIRED.COMMIT", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of times RTM commit succeeded.", + "SampleAfterValue": "100003", + "UMask": "0x2" + }, + { + "BriefDescription": "Number of times an RTM execution started.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc9", + "EventName": "RTM_RETIRED.START", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of times we entered an RTM region. Does not count nested transactions.", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Speculatively counts the number of TSX aborts due to a data capacity limitation for transactional reads", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x54", + "EventName": "TX_MEM.ABORT_CAPACITY_READ", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Speculatively counts the number of Transactional Synchronization Extensions (TSX) aborts due to a data capacity limitation for transactional reads", + "SampleAfterValue": "100003", + "UMask": "0x80" + }, + { + "BriefDescription": "Speculatively counts the number of TSX aborts due to a data capacity limitation for transactional writes.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x54", + "EventName": "TX_MEM.ABORT_CAPACITY_WRITE", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Speculatively counts the number of Transactional Synchronization Extensions (TSX) aborts due to a data capacity limitation for transactional writes.", + "SampleAfterValue": "100003", + "UMask": "0x2" + }, + { + "BriefDescription": "Number of times a transactional abort was signaled due to a data conflict on a transactionally accessed address", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x54", + "EventName": "TX_MEM.ABORT_CONFLICT", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of times a TSX line had a cache conflict.", + "SampleAfterValue": "100003", + "UMask": "0x1" + } +] diff --git a/tools/perf/pmu-events/arch/x86/sapphirerapids/other.json b/tools/perf/pmu-events/arch/x86/sapphirerapids/other.json new file mode 100644 index 000000000000..e6d4921a42cb --- /dev/null +++ b/tools/perf/pmu-events/arch/x86/sapphirerapids/other.json @@ -0,0 +1,329 @@ +[ + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc1", + "EventName": "ASSISTS.PAGE_FAULT", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x8" + }, + { + "BriefDescription": "Counts the cycles where the AMX (Advance Matrix Extension) unit is busy performing an operation.", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb7", + "EventName": "EXE.AMX_BUSY", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that have any type of response.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_CODE_RD.ANY_RESPONSE", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x10004", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by DRAM.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_CODE_RD.DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x73C000004", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by DRAM attached to this socket, unless in Sub NUMA Cluster(SNC) Mode. In SNC Mode counts only those DRAM accesses that are controlled by the close SNC Cluster.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_CODE_RD.LOCAL_DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x104000004", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by DRAM on a distant memory controller of this socket when the system is in SNC (sub-NUMA cluster) mode.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_CODE_RD.SNC_DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x708000004", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that have any type of response.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.ANY_RESPONSE", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x10001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that were supplied by DRAM.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x73C000001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that were supplied by DRAM attached to this socket, unless in Sub NUMA Cluster(SNC) Mode. In SNC Mode counts only those DRAM accesses that are controlled by the close SNC Cluster.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.LOCAL_DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x104000001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that were supplied by DRAM attached to another socket.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.REMOTE_DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x730000001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that were supplied by PMM attached to another socket.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.REMOTE_PMM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x703000001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand data reads that were supplied by DRAM on a distant memory controller of this socket when the system is in SNC (sub-NUMA cluster) mode.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_DATA_RD.SNC_DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x708000001", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that have any type of response.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_RFO.ANY_RESPONSE", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x3F3FFC0002", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that were supplied by DRAM.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_RFO.DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x73C000002", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that were supplied by DRAM attached to this socket, unless in Sub NUMA Cluster(SNC) Mode. In SNC Mode counts only those DRAM accesses that are controlled by the close SNC Cluster.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_RFO.LOCAL_DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x104000002", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that were supplied by DRAM on a distant memory controller of this socket when the system is in SNC (sub-NUMA cluster) mode.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.DEMAND_RFO.SNC_DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x708000002", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts hardware prefetches (which bring data to L2) that have any type of response.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.HWPF_L2.ANY_RESPONSE", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x10070", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts hardware prefetches to the L3 only that have any type of response.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.HWPF_L3.ANY_RESPONSE", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x12380", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts hardware prefetches to the L3 only that were not supplied by the local socket's L1, L2, or L3 caches and the cacheline was homed in a remote socket.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.HWPF_L3.REMOTE", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x90002380", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that have any type of response.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.ANY_RESPONSE", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x3F3FFC4477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by DRAM.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x73C004477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by DRAM attached to this socket, unless in Sub NUMA Cluster(SNC) Mode. In SNC Mode counts only those DRAM accesses that are controlled by the close SNC Cluster.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.LOCAL_DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x104004477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by DRAM attached to this socket, whether or not in Sub NUMA Cluster(SNC) Mode. In SNC Mode counts DRAM accesses that are controlled by the close or distant SNC Cluster.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.LOCAL_SOCKET_DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x70C004477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by PMM attached to this socket, whether or not in Sub NUMA Cluster(SNC) Mode. In SNC Mode counts PMM accesses that are controlled by the close or distant SNC Cluster.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.LOCAL_SOCKET_PMM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x700C04477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were not supplied by the local socket's L1, L2, or L3 caches and were supplied by a remote socket.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.REMOTE", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x3F33004477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by DRAM attached to another socket.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.REMOTE_DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x730004477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by DRAM on a distant memory controller of this socket when the system is in SNC (sub-NUMA cluster) mode.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.READS_TO_CORE.SNC_DRAM", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x708004477", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts streaming stores that have any type of response.", + "Counter": "0,1,2,3", + "EventCode": "0x2A,0x2B", + "EventName": "OCR.STREAMING_WR.ANY_RESPONSE", + "MSRIndex": "0x1a6,0x1a7", + "MSRValue": "0x10800", + "Offcore": "1", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xa5", + "EventName": "RS_EMPTY.CYCLES", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts cycles during which the reservation station (RS) is empty for this logical processor.", + "SampleAfterValue": "1000003", + "UMask": "0x7" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EventCode": "0x2d", + "EventName": "XQ.FULL_CYCLES", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x1" + } +] diff --git a/tools/perf/pmu-events/arch/x86/sapphirerapids/pipeline.json b/tools/perf/pmu-events/arch/x86/sapphirerapids/pipeline.json new file mode 100644 index 000000000000..25a12e03cb85 --- /dev/null +++ b/tools/perf/pmu-events/arch/x86/sapphirerapids/pipeline.json @@ -0,0 +1,1271 @@ +[ + { + "BriefDescription": "TBD", + "EventCode": "0xce", + "EventName": "AMX_OPS_RETIRED.BF16", + "SampleAfterValue": "1000003", + "UMask": "0x2" + }, + { + "BriefDescription": "TBD", + "EventCode": "0xce", + "EventName": "AMX_OPS_RETIRED.INT8", + "SampleAfterValue": "1000003", + "UMask": "0x1" + }, + { + "BriefDescription": "This event is deprecated. Refer to new event ARITH.DIV_ACTIVE", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xb0", + "EventName": "ARITH.DIVIDER_ACTIVE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x9" + }, + { + "BriefDescription": "Cycles when divide unit is busy executing divide or square root operations.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xb0", + "EventName": "ARITH.DIV_ACTIVE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts cycles when divide unit is busy executing divide or square root operations. Accounts for integer and floating-point operations.", + "SampleAfterValue": "1000003", + "UMask": "0x9" + }, + { + "BriefDescription": "This event is deprecated. Refer to new event ARITH.FPDIV_ACTIVE", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xb0", + "EventName": "ARITH.FP_DIVIDER_ACTIVE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x1" + }, + { + "BriefDescription": "This event counts the cycles the integer divider is busy.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb0", + "EventName": "ARITH.IDIV_ACTIVE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x8" + }, + { + "BriefDescription": "This event is deprecated. Refer to new event ARITH.IDIV_ACTIVE", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xb0", + "EventName": "ARITH.INT_DIVIDER_ACTIVE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x8" + }, + { + "BriefDescription": "Number of occurrences where a microcode assist is invoked by hardware.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc1", + "EventName": "ASSISTS.ANY", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of occurrences where a microcode assist is invoked by hardware Examples include AD (page Access Dirty), FP and AVX related assists.", + "SampleAfterValue": "100003", + "UMask": "0x1f" + }, + { + "BriefDescription": "All branch instructions retired.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc4", + "EventName": "BR_INST_RETIRED.ALL_BRANCHES", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts all branch instructions retired.", + "SampleAfterValue": "400009" + }, + { + "BriefDescription": "Conditional branch instructions retired.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc4", + "EventName": "BR_INST_RETIRED.COND", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts conditional branch instructions retired.", + "SampleAfterValue": "400009", + "UMask": "0x11" + }, + { + "BriefDescription": "Not taken branch instructions retired.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc4", + "EventName": "BR_INST_RETIRED.COND_NTAKEN", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts not taken branch instructions retired.", + "SampleAfterValue": "400009", + "UMask": "0x10" + }, + { + "BriefDescription": "Taken conditional branch instructions retired.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc4", + "EventName": "BR_INST_RETIRED.COND_TAKEN", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts taken conditional branch instructions retired.", + "SampleAfterValue": "400009", + "UMask": "0x1" + }, + { + "BriefDescription": "Far branch instructions retired.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc4", + "EventName": "BR_INST_RETIRED.FAR_BRANCH", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts far branch instructions retired.", + "SampleAfterValue": "100007", + "UMask": "0x40" + }, + { + "BriefDescription": "Indirect near branch instructions retired (excluding returns)", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc4", + "EventName": "BR_INST_RETIRED.INDIRECT", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts near indirect branch instructions retired excluding returns. TSX abort is an indirect branch.", + "SampleAfterValue": "100003", + "UMask": "0x80" + }, + { + "BriefDescription": "Direct and indirect near call instructions retired.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc4", + "EventName": "BR_INST_RETIRED.NEAR_CALL", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts both direct and indirect near call instructions retired.", + "SampleAfterValue": "100007", + "UMask": "0x2" + }, + { + "BriefDescription": "Return instructions retired.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc4", + "EventName": "BR_INST_RETIRED.NEAR_RETURN", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts return instructions retired.", + "SampleAfterValue": "100007", + "UMask": "0x8" + }, + { + "BriefDescription": "Taken branch instructions retired.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc4", + "EventName": "BR_INST_RETIRED.NEAR_TAKEN", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts taken branch instructions retired.", + "SampleAfterValue": "400009", + "UMask": "0x20" + }, + { + "BriefDescription": "All mispredicted branch instructions retired.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc5", + "EventName": "BR_MISP_RETIRED.ALL_BRANCHES", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts all the retired branch instructions that were mispredicted by the processor. A branch misprediction occurs when the processor incorrectly predicts the destination of the branch. When the misprediction is discovered at execution, all the instructions executed in the wrong (speculative) path must be discarded, and the processor must start fetching from the correct path.", + "SampleAfterValue": "400009" + }, + { + "BriefDescription": "Mispredicted conditional branch instructions retired.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc5", + "EventName": "BR_MISP_RETIRED.COND", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts mispredicted conditional branch instructions retired.", + "SampleAfterValue": "400009", + "UMask": "0x11" + }, + { + "BriefDescription": "Mispredicted non-taken conditional branch instructions retired.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc5", + "EventName": "BR_MISP_RETIRED.COND_NTAKEN", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of conditional branch instructions retired that were mispredicted and the branch direction was not taken.", + "SampleAfterValue": "400009", + "UMask": "0x10" + }, + { + "BriefDescription": "number of branch instructions retired that were mispredicted and taken. Non PEBS", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc5", + "EventName": "BR_MISP_RETIRED.COND_TAKEN", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts taken conditional mispredicted branch instructions retired.", + "SampleAfterValue": "400009", + "UMask": "0x1" + }, + { + "BriefDescription": "Miss-predicted near indirect branch instructions retired (excluding returns)", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc5", + "EventName": "BR_MISP_RETIRED.INDIRECT", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts miss-predicted near indirect branch instructions retired excluding returns. TSX abort is an indirect branch.", + "SampleAfterValue": "100003", + "UMask": "0x80" + }, + { + "BriefDescription": "Mispredicted indirect CALL retired.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc5", + "EventName": "BR_MISP_RETIRED.INDIRECT_CALL", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts retired mispredicted indirect (near taken) CALL instructions, including both register and memory indirect.", + "SampleAfterValue": "400009", + "UMask": "0x2" + }, + { + "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc5", + "EventName": "BR_MISP_RETIRED.NEAR_TAKEN", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts number of near branch instructions retired that were mispredicted and taken.", + "SampleAfterValue": "400009", + "UMask": "0x20" + }, + { + "BriefDescription": "This event counts the number of mispredicted ret instructions retired. Non PEBS", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc5", + "EventName": "BR_MISP_RETIRED.RET", + "PEBS": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts mispredicted return instructions retired.", + "SampleAfterValue": "100007", + "UMask": "0x8" + }, + { + "BriefDescription": "Core clocks when the thread is in the C0.1 light-weight slower wakeup time but more power saving optimized state.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xec", + "EventName": "CPU_CLK_UNHALTED.C01", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts core clocks when the thread is in the C0.1 light-weight slower wakeup time but more power saving optimized state. This state can be entered via the TPAUSE or UMWAIT instructions.", + "SampleAfterValue": "2000003", + "UMask": "0x10" + }, + { + "BriefDescription": "Core clocks when the thread is in the C0.2 light-weight faster wakeup time but less power saving optimized state.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xec", + "EventName": "CPU_CLK_UNHALTED.C02", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts core clocks when the thread is in the C0.2 light-weight faster wakeup time but less power saving optimized state. This state can be entered via the TPAUSE or UMWAIT instructions.", + "SampleAfterValue": "2000003", + "UMask": "0x20" + }, + { + "BriefDescription": "Core clocks when the thread is in the C0.1 or C0.2 or running a PAUSE in C0 ACPI state.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xec", + "EventName": "CPU_CLK_UNHALTED.C0_WAIT", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts core clocks when the thread is in the C0.1 or C0.2 power saving optimized states (TPAUSE or UMWAIT instructions) or running the PAUSE instruction.", + "SampleAfterValue": "2000003", + "UMask": "0x70" + }, + { + "BriefDescription": "Cycle counts are evenly distributed between active threads in the Core.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xec", + "EventName": "CPU_CLK_UNHALTED.DISTRIBUTED", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "This event distributes cycle counts between active hyperthreads, i.e., those in C0. A hyperthread becomes inactive when it executes the HLT or MWAIT instructions. If all other hyperthreads are inactive (or disabled or do not exist), all counts are attributed to this hyperthread. To obtain the full count when the Core is active, sum the counts from each hyperthread.", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Core crystal clock cycles when this thread is unhalted and the other thread is halted.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0x3c", + "EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts Core crystal clock cycles when current thread is unhalted and the other thread is halted.", + "SampleAfterValue": "25003", + "UMask": "0x2" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xec", + "EventName": "CPU_CLK_UNHALTED.PAUSE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x40" + }, + { + "BriefDescription": "TBD", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EdgeDetect": "1", + "EventCode": "0xec", + "EventName": "CPU_CLK_UNHALTED.PAUSE_INST", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x40" + }, + { + "BriefDescription": "Core crystal clock cycles. Cycle counts are evenly distributed between active threads in the Core.", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0x3c", + "EventName": "CPU_CLK_UNHALTED.REF_DISTRIBUTED", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "This event distributes Core crystal clock cycle counts between active hyperthreads, i.e., those in C0 sleep-state. A hyperthread becomes inactive when it executes the HLT or MWAIT instructions. If one thread is active in a core, all counts are attributed to this hyperthread. To obtain the full count when the Core is active, sum the counts from each hyperthread.", + "SampleAfterValue": "2000003", + "UMask": "0x8" + }, + { + "BriefDescription": "Reference cycles when the core is not in halt state.", + "CollectPEBSRecord": "2", + "Counter": "Fixed counter 2", + "EventName": "CPU_CLK_UNHALTED.REF_TSC", + "PEBScounters": "34", + "PublicDescription": "Counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. It is counted on a dedicated fixed counter, leaving the eight programmable counters available for other events. Note: On all current platforms this event stops counting during 'throttling (TM)' states duty off periods the processor is 'halted'. The counter update is done at a lower clock rate then the core clock the overflow status bit for this counter may appear 'sticky'. After the counter has overflowed and software clears the overflow status bit and resets the counter to less than MAX. The reset value to the counter is not clocked immediately so the overflow status bit will flip 'high (1)' and generate another PMI (if enabled) after which the reset value gets clocked into the counter. Therefore, software will get the interrupt, read the overflow status bit '1 for bit 34 while the counter value is less than MAX. Software should ignore this case.", + "SampleAfterValue": "2000003", + "UMask": "0x3" + }, + { + "BriefDescription": "Core cycles when the thread is not in halt state", + "CollectPEBSRecord": "2", + "Counter": "Fixed counter 1", + "EventName": "CPU_CLK_UNHALTED.THREAD", + "PEBScounters": "33", + "PublicDescription": "Counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the eight programmable counters available for other events.", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Thread cycles when thread is not in halt state", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0x3c", + "EventName": "CPU_CLK_UNHALTED.THREAD_P", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "This is an architectural event that counts the number of thread cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. The core frequency may change from time to time due to power or thermal throttling. For this reason, this event may have a changing ratio with regards to wall clock time.", + "SampleAfterValue": "2000003" + }, + { + "BriefDescription": "Cycles while L1 cache miss demand load is outstanding.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "8", + "EventCode": "0xa3", + "EventName": "CYCLE_ACTIVITY.CYCLES_L1D_MISS", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x8" + }, + { + "BriefDescription": "Cycles while L2 cache miss demand load is outstanding.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EventCode": "0xa3", + "EventName": "CYCLE_ACTIVITY.CYCLES_L2_MISS", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Cycles while memory subsystem has an outstanding load.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "16", + "EventCode": "0xa3", + "EventName": "CYCLE_ACTIVITY.CYCLES_MEM_ANY", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x10" + }, + { + "BriefDescription": "Execution stalls while L1 cache miss demand load is outstanding.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "12", + "EventCode": "0xa3", + "EventName": "CYCLE_ACTIVITY.STALLS_L1D_MISS", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0xc" + }, + { + "BriefDescription": "Execution stalls while L2 cache miss demand load is outstanding.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "5", + "EventCode": "0xa3", + "EventName": "CYCLE_ACTIVITY.STALLS_L2_MISS", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x5" + }, + { + "BriefDescription": "Total execution stalls.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "4", + "EventCode": "0xa3", + "EventName": "CYCLE_ACTIVITY.STALLS_TOTAL", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x4" + }, + { + "BriefDescription": "Cycles total of 1 uop is executed on all ports and Reservation Station was not empty.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xa6", + "EventName": "EXE_ACTIVITY.1_PORTS_UTIL", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts cycles during which a total of 1 uop was executed on all ports and Reservation Station (RS) was not empty.", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Cycles total of 2 uops are executed on all ports and Reservation Station was not empty.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xa6", + "EventName": "EXE_ACTIVITY.2_PORTS_UTIL", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts cycles during which a total of 2 uops were executed on all ports and Reservation Station (RS) was not empty.", + "SampleAfterValue": "2000003", + "UMask": "0x4" + }, + { + "BriefDescription": "Cycles total of 3 uops are executed on all ports and Reservation Station was not empty.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xa6", + "EventName": "EXE_ACTIVITY.3_PORTS_UTIL", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Cycles total of 3 uops are executed on all ports and Reservation Station (RS) was not empty.", + "SampleAfterValue": "2000003", + "UMask": "0x8" + }, + { + "BriefDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station was not empty.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xa6", + "EventName": "EXE_ACTIVITY.4_PORTS_UTIL", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station (RS) was not empty.", + "SampleAfterValue": "2000003", + "UMask": "0x10" + }, + { + "BriefDescription": "Execution stalls while memory subsystem has an outstanding load.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "5", + "EventCode": "0xa6", + "EventName": "EXE_ACTIVITY.BOUND_ON_LOADS", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x21" + }, + { + "BriefDescription": "Cycles where the Store Buffer was full and no loads caused an execution stall.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "2", + "EventCode": "0xa6", + "EventName": "EXE_ACTIVITY.BOUND_ON_STORES", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts cycles where the Store Buffer was full and no loads caused an execution stall.", + "SampleAfterValue": "1000003", + "UMask": "0x40" + }, + { + "BriefDescription": "Instruction decoders utilized in a cycle", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x75", + "EventName": "INST_DECODED.DECODERS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Number of decoders utilized in a cycle when the MITE (legacy decode pipeline) fetches instructions.", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Number of instructions retired. Fixed Counter - architectural event", + "CollectPEBSRecord": "2", + "Counter": "Fixed counter 0", + "EventName": "INST_RETIRED.ANY", + "PEBS": "1", + "PEBScounters": "32", + "PublicDescription": "Counts the number of X86 instructions retired - an Architectural PerfMon event. Counting continues during hardware interrupts, traps, and inside interrupt handlers. Notes: INST_RETIRED.ANY is counted by a designated fixed counter freeing up programmable counters to count other events. INST_RETIRED.ANY_P is counted by a programmable counter.", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Number of instructions retired. General Counter - architectural event", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc0", + "EventName": "INST_RETIRED.ANY_P", + "PEBS": "1", + "PEBScounters": "1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of X86 instructions retired - an Architectural PerfMon event. Counting continues during hardware interrupts, traps, and inside interrupt handlers. Notes: INST_RETIRED.ANY is counted by a designated fixed counter freeing up programmable counters to count other events. INST_RETIRED.ANY_P is counted by a programmable counter.", + "SampleAfterValue": "2000003" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc0", + "EventName": "INST_RETIRED.MACRO_FUSED", + "PEBScounters": "1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x10" + }, + { + "BriefDescription": "Number of all retired NOP instructions.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc0", + "EventName": "INST_RETIRED.NOP", + "PEBScounters": "1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Precise instruction retired with PEBS precise-distribution", + "CollectPEBSRecord": "2", + "Counter": "Fixed counter 0", + "EventName": "INST_RETIRED.PREC_DIST", + "PEBS": "1", + "PEBScounters": "32", + "PublicDescription": "A version of INST_RETIRED that allows for a precise distribution of samples across instructions retired. It utilizes the Precise Distribution of Instructions Retired (PDIR++) feature to fix bias in how retired instructions get sampled. Use on Fixed Counter 0.", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc0", + "EventName": "INST_RETIRED.REP_ITERATION", + "PEBScounters": "1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x8" + }, + { + "BriefDescription": "Counts cycles after recovery from a branch misprediction or machine clear till the first uop is issued from the resteered path.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xad", + "EventName": "INT_MISC.CLEAR_RESTEER_CYCLES", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Cycles after recovery from a branch misprediction or machine clear till the first uop is issued from the resteered path.", + "SampleAfterValue": "500009", + "UMask": "0x80" + }, + { + "BriefDescription": "TBD", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xad", + "EventName": "INT_MISC.MBA_STALLS", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x20" + }, + { + "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for this thread", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xad", + "EventName": "INT_MISC.RECOVERY_CYCLES", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts core cycles when the Resource allocator was stalled due to recovery from an earlier branch misprediction or machine clear event.", + "SampleAfterValue": "500009", + "UMask": "0x1" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xad", + "EventName": "INT_MISC.UNKNOWN_BRANCH_CYCLES", + "MSRIndex": "0x3F7", + "MSRValue": "0x7", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "TakenAlone": "1", + "UMask": "0x40" + }, + { + "BriefDescription": "TMA slots where uops got dropped", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xad", + "EventName": "INT_MISC.UOP_DROPPING", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Estimated number of Top-down Microarchitecture Analysis slots that got dropped due to non front-end reasons", + "SampleAfterValue": "1000003", + "UMask": "0x10" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xe7", + "EventName": "INT_VEC_RETIRED.128BIT", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x13" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xe7", + "EventName": "INT_VEC_RETIRED.256BIT", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0xac" + }, + { + "BriefDescription": "integer ADD, SUB, SAD 128-bit vector instructions.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xe7", + "EventName": "INT_VEC_RETIRED.ADD_128", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of retired integer ADD/SUB (regular or horizontal), SAD 128-bit vector instructions.", + "SampleAfterValue": "1000003", + "UMask": "0x3" + }, + { + "BriefDescription": "integer ADD, SUB, SAD 256-bit vector instructions.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xe7", + "EventName": "INT_VEC_RETIRED.ADD_256", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of retired integer ADD/SUB (regular or horizontal), SAD 256-bit vector instructions.", + "SampleAfterValue": "1000003", + "UMask": "0xc" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xe7", + "EventName": "INT_VEC_RETIRED.MUL_256", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x80" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xe7", + "EventName": "INT_VEC_RETIRED.SHUFFLES", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x40" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xe7", + "EventName": "INT_VEC_RETIRED.VNNI_128", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x10" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xe7", + "EventName": "INT_VEC_RETIRED.VNNI_256", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x20" + }, + { + "BriefDescription": "False dependencies in MOB due to partial compare on address.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x03", + "EventName": "LD_BLOCKS.ADDRESS_ALIAS", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of times a load got blocked due to false dependencies in MOB due to partial compare on address.", + "SampleAfterValue": "100003", + "UMask": "0x4" + }, + { + "BriefDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x03", + "EventName": "LD_BLOCKS.NO_SR", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.", + "SampleAfterValue": "100003", + "UMask": "0x88" + }, + { + "BriefDescription": "Loads blocked due to overlapping with a preceding store that cannot be forwarded.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x03", + "EventName": "LD_BLOCKS.STORE_FORWARD", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of times where store forwarding was prevented for a load operation. The most common case is a load blocked due to the address of memory access (partially) overlapping with a preceding uncompleted store. Note: See the table of not supported store forwards in the Optimization Guide.", + "SampleAfterValue": "100003", + "UMask": "0x82" + }, + { + "BriefDescription": "Counts the number of demand load dispatches that hit L1D fill buffer (FB) allocated for software prefetch.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x4c", + "EventName": "LOAD_HIT_PREFETCH.SWPF", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts all not software-prefetch load dispatches that hit the fill buffer (FB) allocated for the software prefetch. It can also be incremented by some lock instructions. So it should only be used with profiling so that the locks can be excluded by ASM (Assembly File) inspection of the nearby instructions.", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xa8", + "EventName": "LSD.CYCLES_ACTIVE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the cycles when at least one uop is delivered by the LSD (Loop-stream detector).", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Cycles optimal number of Uops delivered by the LSD, but did not come from the decoder.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "6", + "EventCode": "0xa8", + "EventName": "LSD.CYCLES_OK", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the cycles when optimal number of uops is delivered by the LSD (Loop-stream detector).", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Number of Uops delivered by the LSD.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xa8", + "EventName": "LSD.UOPS", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of uops delivered to the back-end by the LSD(Loop Stream Detector).", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Number of machine clears (nukes) of any type.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EdgeDetect": "1", + "EventCode": "0xc3", + "EventName": "MACHINE_CLEARS.COUNT", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of machine clears (nukes) of any type.", + "SampleAfterValue": "100003", + "UMask": "0x1" + }, + { + "BriefDescription": "Self-modifying code (SMC) detected.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc3", + "EventName": "MACHINE_CLEARS.SMC", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts self-modifying code (SMC) detected, which causes a machine clear.", + "SampleAfterValue": "100003", + "UMask": "0x4" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xe0", + "EventName": "MISC2_RETIRED.LFENCE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "400009", + "UMask": "0x20" + }, + { + "BriefDescription": "Increments whenever there is an update to the LBR array.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xcc", + "EventName": "MISC_RETIRED.LBR_INSERTS", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Increments when an entry is added to the Last Branch Record (LBR) array (or removed from the array in case of RETURNs in call stack mode). The event requires LBR enable via IA32_DEBUGCTL MSR and branch type selection via MSR_LBR_SELECT.", + "SampleAfterValue": "100003", + "UMask": "0x20" + }, + { + "BriefDescription": "Cycles stalled due to no store buffers available. (not including draining form sync).", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xa2", + "EventName": "RESOURCE_STALLS.SB", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts allocation stall cycles caused by the store buffer (SB) being full. This counts cycles that the pipeline back-end blocked uop delivery from the front-end.", + "SampleAfterValue": "100003", + "UMask": "0x8" + }, + { + "BriefDescription": "Counts cycles where the pipeline is stalled due to serializing operations.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xa2", + "EventName": "RESOURCE_STALLS.SCOREBOARD", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "100003", + "UMask": "0x2" + }, + { + "BriefDescription": "TMA slots where no uops were being issued due to lack of back-end resources.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xa4", + "EventName": "TOPDOWN.BACKEND_BOUND_SLOTS", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of slots in TMA method where no micro-operations were being issued from front-end to back-end of the machine due to lack of back-end resources.", + "SampleAfterValue": "10000003", + "UMask": "0x2" + }, + { + "BriefDescription": "TMA slots wasted due to incorrect speculations.", + "CollectPEBSRecord": "2", + "EventCode": "0xa4", + "EventName": "TOPDOWN.BAD_SPEC_SLOTS", + "PublicDescription": "Number of slots of TMA method that were wasted due to incorrect speculation. It covers all types of control-flow or data-related mis-speculations.", + "SampleAfterValue": "10000003", + "UMask": "0x4" + }, + { + "BriefDescription": "TMA slots wasted due to incorrect speculation by branch mispredictions", + "CollectPEBSRecord": "2", + "EventCode": "0xa4", + "EventName": "TOPDOWN.BR_MISPREDICT_SLOTS", + "PublicDescription": "Number of TMA slots that were wasted due to incorrect speculation by (any type of) branch mispredictions. This event estimates number of specualtive operations that were issued but not retired as well as the out-of-order engine recovery past a branch misprediction.", + "SampleAfterValue": "10000003", + "UMask": "0x8" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xa4", + "EventName": "TOPDOWN.MEMORY_BOUND_SLOTS", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "10000003", + "UMask": "0x10" + }, + { + "BriefDescription": "TMA slots available for an unhalted logical processor. Fixed counter - architectural event", + "CollectPEBSRecord": "2", + "Counter": "Fixed counter 3", + "EventName": "TOPDOWN.SLOTS", + "PEBScounters": "35", + "PublicDescription": "Number of available slots for an unhalted logical processor. The event increments by machine-width of the narrowest pipeline as employed by the Top-down Microarchitecture Analysis method (TMA). The count is distributed among unhalted logical processors (hyper-threads) who share the same physical core. Software can use this event as the denominator for the top-level metrics of the TMA method. This architectural event is counted on a designated fixed counter (Fixed Counter 3).", + "SampleAfterValue": "10000003", + "UMask": "0x4" + }, + { + "BriefDescription": "TMA slots available for an unhalted logical processor. General counter - architectural event", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xa4", + "EventName": "TOPDOWN.SLOTS_P", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of available slots for an unhalted logical processor. The event increments by machine-width of the narrowest pipeline as employed by the Top-down Microarchitecture Analysis method. The count is distributed among unhalted logical processors (hyper-threads) who share the same physical core.", + "SampleAfterValue": "10000003", + "UMask": "0x1" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x76", + "EventName": "UOPS_DECODED.DEC0_UOPS", + "PEBScounters": "0,1,2,3", + "SampleAfterValue": "1000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Uops executed on port 0", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb2", + "EventName": "UOPS_DISPATCHED.PORT_0", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of uops dispatch to execution port 0.", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Uops executed on port 1", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb2", + "EventName": "UOPS_DISPATCHED.PORT_1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of uops dispatch to execution port 1.", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Uops executed on ports 2, 3 and 10", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb2", + "EventName": "UOPS_DISPATCHED.PORT_2_3_10", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of uops dispatch to execution ports 2, 3 and 10", + "SampleAfterValue": "2000003", + "UMask": "0x4" + }, + { + "BriefDescription": "Uops executed on ports 4 and 9", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb2", + "EventName": "UOPS_DISPATCHED.PORT_4_9", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of uops dispatch to execution ports 4 and 9", + "SampleAfterValue": "2000003", + "UMask": "0x10" + }, + { + "BriefDescription": "Uops executed on ports 5 and 11", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb2", + "EventName": "UOPS_DISPATCHED.PORT_5_11", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of uops dispatch to execution ports 5 and 11", + "SampleAfterValue": "2000003", + "UMask": "0x20" + }, + { + "BriefDescription": "Uops executed on port 6", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb2", + "EventName": "UOPS_DISPATCHED.PORT_6", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of uops dispatch to execution port 6.", + "SampleAfterValue": "2000003", + "UMask": "0x40" + }, + { + "BriefDescription": "Uops executed on ports 7 and 8", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb2", + "EventName": "UOPS_DISPATCHED.PORT_7_8", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Number of uops dispatch to execution ports 7 and 8.", + "SampleAfterValue": "2000003", + "UMask": "0x80" + }, + { + "BriefDescription": "Number of uops executed on the core.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.CORE", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of uops executed from any thread.", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts cycles when at least 1 micro-op is executed from any thread on physical core.", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "2", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_2", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts cycles when at least 2 micro-ops are executed from any thread on physical core.", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Cycles at least 3 micro-op is executed from any thread on physical core.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "3", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_3", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts cycles when at least 3 micro-ops are executed from any thread on physical core.", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "4", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts cycles when at least 4 micro-ops are executed from any thread on physical core.", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Cycles where at least 1 uop was executed per-thread", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.CYCLES_GE_1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Cycles where at least 1 uop was executed per-thread.", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Cycles where at least 2 uops were executed per-thread", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "2", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.CYCLES_GE_2", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Cycles where at least 2 uops were executed per-thread.", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Cycles where at least 3 uops were executed per-thread", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "3", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.CYCLES_GE_3", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Cycles where at least 3 uops were executed per-thread.", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Cycles where at least 4 uops were executed per-thread", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "4", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.CYCLES_GE_4", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Cycles where at least 4 uops were executed per-thread.", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts number of cycles no uops were dispatched to be executed on this thread.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.STALLS", + "Invert": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts cycles during which no uops were dispatched from the Reservation Station (RS) per thread.", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "This event is deprecated. Refer to new event UOPS_EXECUTED.STALLS", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.STALL_CYCLES", + "Invert": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts the number of uops to be executed per-thread each cycle.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.THREAD", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Counts the number of x87 uops dispatched.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xb1", + "EventName": "UOPS_EXECUTED.X87", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of x87 uops executed.", + "SampleAfterValue": "2000003", + "UMask": "0x10" + }, + { + "BriefDescription": "Uops that RAT issues to RS", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xae", + "EventName": "UOPS_ISSUED.ANY", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of uops that the Resource Allocation Table (RAT) issues to the Reservation Station (RS).", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "Cycles with retired uop(s).", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xc2", + "EventName": "UOPS_RETIRED.CYCLES", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts cycles where at least one uop has retired.", + "SampleAfterValue": "1000003", + "UMask": "0x2" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc2", + "EventName": "UOPS_RETIRED.HEAVY", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { + "BriefDescription": "TBD", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc2", + "EventName": "UOPS_RETIRED.MS", + "MSRIndex": "0x3F7", + "MSRValue": "0x8", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "2000003", + "TakenAlone": "1", + "UMask": "0x4" + }, + { + "BriefDescription": "Retirement slots used.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc2", + "EventName": "UOPS_RETIRED.SLOTS", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the retirement slots used each cycle.", + "SampleAfterValue": "2000003", + "UMask": "0x2" + }, + { + "BriefDescription": "Cycles without actually retired uops.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xc2", + "EventName": "UOPS_RETIRED.STALLS", + "Invert": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "This event counts cycles without actually retired uops.", + "SampleAfterValue": "1000003", + "UMask": "0x2" + }, + { + "BriefDescription": "This event is deprecated. Refer to new event UOPS_RETIRED.STALLS", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "CounterMask": "1", + "EventCode": "0xc2", + "EventName": "UOPS_RETIRED.STALL_CYCLES", + "Invert": "1", + "PEBScounters": "0,1,2,3,4,5,6,7", + "SampleAfterValue": "1000003", + "UMask": "0x2" + } +] diff --git a/tools/perf/pmu-events/arch/x86/sapphirerapids/virtual-memory.json b/tools/perf/pmu-events/arch/x86/sapphirerapids/virtual-memory.json new file mode 100644 index 000000000000..cba69368308e --- /dev/null +++ b/tools/perf/pmu-events/arch/x86/sapphirerapids/virtual-memory.json @@ -0,0 +1,225 @@ +[ + { + "BriefDescription": "Loads that miss the DTLB and hit the STLB.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x12", + "EventName": "DTLB_LOAD_MISSES.STLB_HIT", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts loads that miss the DTLB (Data TLB) and hit the STLB (Second level TLB).", + "SampleAfterValue": "100003", + "UMask": "0x20" + }, + { + "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a demand load.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EventCode": "0x12", + "EventName": "DTLB_LOAD_MISSES.WALK_ACTIVE", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a demand load.", + "SampleAfterValue": "100003", + "UMask": "0x10" + }, + { + "BriefDescription": "Load miss in all TLB levels causes a page walk that completes. (All page sizes)", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x12", + "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts completed page walks (all page sizes) caused by demand data loads. This implies it missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.", + "SampleAfterValue": "100003", + "UMask": "0xe" + }, + { + "BriefDescription": "Page walks completed due to a demand data load to a 1G page.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x12", + "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_1G", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts completed page walks (1G sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.", + "SampleAfterValue": "100003", + "UMask": "0x8" + }, + { + "BriefDescription": "Page walks completed due to a demand data load to a 2M/4M page.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x12", + "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_2M_4M", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts completed page walks (2M/4M sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.", + "SampleAfterValue": "100003", + "UMask": "0x4" + }, + { + "BriefDescription": "Page walks completed due to a demand data load to a 4K page.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x12", + "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_4K", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts completed page walks (4K sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.", + "SampleAfterValue": "100003", + "UMask": "0x2" + }, + { + "BriefDescription": "Number of page walks outstanding for a demand load in the PMH each cycle.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x12", + "EventName": "DTLB_LOAD_MISSES.WALK_PENDING", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of page walks outstanding for a demand load in the PMH (Page Miss Handler) each cycle.", + "SampleAfterValue": "100003", + "UMask": "0x10" + }, + { + "BriefDescription": "Stores that miss the DTLB and hit the STLB.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x13", + "EventName": "DTLB_STORE_MISSES.STLB_HIT", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts stores that miss the DTLB (Data TLB) and hit the STLB (2nd Level TLB).", + "SampleAfterValue": "100003", + "UMask": "0x20" + }, + { + "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a store.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EventCode": "0x13", + "EventName": "DTLB_STORE_MISSES.WALK_ACTIVE", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a store.", + "SampleAfterValue": "100003", + "UMask": "0x10" + }, + { + "BriefDescription": "Store misses in all TLB levels causes a page walk that completes. (All page sizes)", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x13", + "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts completed page walks (all page sizes) caused by demand data stores. This implies it missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.", + "SampleAfterValue": "100003", + "UMask": "0xe" + }, + { + "BriefDescription": "Page walks completed due to a demand data store to a 1G page.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x13", + "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_1G", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts completed page walks (1G sizes) caused by demand data stores. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.", + "SampleAfterValue": "100003", + "UMask": "0x8" + }, + { + "BriefDescription": "Page walks completed due to a demand data store to a 2M/4M page.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x13", + "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_2M_4M", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts completed page walks (2M/4M sizes) caused by demand data stores. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.", + "SampleAfterValue": "100003", + "UMask": "0x4" + }, + { + "BriefDescription": "Page walks completed due to a demand data store to a 4K page.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x13", + "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_4K", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts completed page walks (4K sizes) caused by demand data stores. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.", + "SampleAfterValue": "100003", + "UMask": "0x2" + }, + { + "BriefDescription": "Number of page walks outstanding for a store in the PMH each cycle.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x13", + "EventName": "DTLB_STORE_MISSES.WALK_PENDING", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of page walks outstanding for a store in the PMH (Page Miss Handler) each cycle.", + "SampleAfterValue": "100003", + "UMask": "0x10" + }, + { + "BriefDescription": "Instruction fetch requests that miss the ITLB and hit the STLB.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x11", + "EventName": "ITLB_MISSES.STLB_HIT", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts instruction fetch requests that miss the ITLB (Instruction TLB) and hit the STLB (Second-level TLB).", + "SampleAfterValue": "100003", + "UMask": "0x20" + }, + { + "BriefDescription": "Cycles when at least one PMH is busy with a page walk for code (instruction fetch) request.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EventCode": "0x11", + "EventName": "ITLB_MISSES.WALK_ACTIVE", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a code (instruction fetch) request.", + "SampleAfterValue": "100003", + "UMask": "0x10" + }, + { + "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (All page sizes)", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x11", + "EventName": "ITLB_MISSES.WALK_COMPLETED", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts completed page walks (all page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.", + "SampleAfterValue": "100003", + "UMask": "0xe" + }, + { + "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (2M/4M)", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x11", + "EventName": "ITLB_MISSES.WALK_COMPLETED_2M_4M", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts completed page walks (2M/4M page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.", + "SampleAfterValue": "100003", + "UMask": "0x4" + }, + { + "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (4K)", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x11", + "EventName": "ITLB_MISSES.WALK_COMPLETED_4K", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts completed page walks (4K page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.", + "SampleAfterValue": "100003", + "UMask": "0x2" + }, + { + "BriefDescription": "Number of page walks outstanding for an outstanding code request in the PMH each cycle.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0x11", + "EventName": "ITLB_MISSES.WALK_PENDING", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the number of page walks outstanding for an outstanding code (instruction fetch) request in the PMH (Page Miss Handler) each cycle.", + "SampleAfterValue": "100003", + "UMask": "0x10" + } +] diff --git a/tools/perf/pmu-events/arch/x86/skylake/cache.json b/tools/perf/pmu-events/arch/x86/skylake/cache.json index c5d9a4ed10d7..c3183819bf52 100644 --- a/tools/perf/pmu-events/arch/x86/skylake/cache.json +++ b/tools/perf/pmu-events/arch/x86/skylake/cache.json @@ -701,7 +701,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -714,7 +713,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC01C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -727,7 +725,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -740,7 +737,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4001C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -753,7 +749,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2001C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -766,7 +761,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x801C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -779,7 +773,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1001C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -792,7 +785,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x401C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -805,7 +797,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0080004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -818,7 +809,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000080004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -831,7 +821,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400080004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -844,7 +833,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200080004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -857,7 +845,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80080004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -870,7 +857,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100080004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -883,7 +869,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40080004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -896,7 +881,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0040004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -909,7 +893,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000040004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -922,7 +905,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400040004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -935,7 +917,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200040004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -948,7 +929,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80040004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -961,7 +941,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100040004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -974,7 +953,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40040004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -987,7 +965,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0100004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1000,7 +977,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000100004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1013,7 +989,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400100004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1026,7 +1001,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200100004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1039,7 +1013,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80100004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1052,7 +1025,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100100004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1065,7 +1037,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40100004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1078,7 +1049,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1091,7 +1061,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1104,7 +1073,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1117,7 +1085,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1130,7 +1097,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1143,7 +1109,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1156,7 +1121,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1169,7 +1133,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0020004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1182,7 +1145,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000020004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1195,7 +1157,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400020004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1208,7 +1169,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200020004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1221,7 +1181,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80020004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1234,7 +1193,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100020004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1247,7 +1205,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40020004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1260,7 +1217,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1273,7 +1229,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC01C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1286,7 +1241,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1299,7 +1253,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4001C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1312,7 +1265,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2001C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1325,7 +1277,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x801C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1338,7 +1289,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1001C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1351,7 +1301,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x401C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1364,7 +1313,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0080001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1377,7 +1325,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000080001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1390,7 +1337,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400080001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1403,7 +1349,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200080001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1416,7 +1361,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80080001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1429,7 +1373,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100080001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1442,7 +1385,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40080001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1455,7 +1397,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0040001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1468,7 +1409,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000040001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1481,7 +1421,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400040001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1494,7 +1433,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200040001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1507,7 +1445,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80040001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1520,7 +1457,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100040001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1533,7 +1469,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40040001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1546,7 +1481,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0100001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1559,7 +1493,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000100001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1572,7 +1505,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400100001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1585,7 +1517,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200100001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1598,7 +1529,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80100001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1611,7 +1541,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100100001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1624,7 +1553,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40100001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1637,7 +1565,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1650,7 +1577,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1663,7 +1589,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1676,7 +1601,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1689,7 +1613,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1702,7 +1625,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1715,7 +1637,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1728,7 +1649,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0020001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1741,7 +1661,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000020001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1754,7 +1673,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400020001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1767,7 +1685,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200020001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1780,7 +1697,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80020001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1793,7 +1709,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100020001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1806,7 +1721,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40020001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1819,7 +1733,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1832,7 +1745,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC01C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1845,7 +1757,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1858,7 +1769,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4001C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1871,7 +1781,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2001C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1884,7 +1793,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x801C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1897,7 +1805,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1001C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1910,7 +1817,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x401C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1923,7 +1829,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0080002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1936,7 +1841,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000080002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1949,7 +1853,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400080002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1962,7 +1865,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200080002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1975,7 +1877,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80080002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1988,7 +1889,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100080002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2001,7 +1901,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40080002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2014,7 +1913,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0040002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2027,7 +1925,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000040002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2040,7 +1937,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400040002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2053,7 +1949,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200040002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2066,7 +1961,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80040002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2079,7 +1973,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100040002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2092,7 +1985,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40040002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2105,7 +1997,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0100002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2118,7 +2009,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000100002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2131,7 +2021,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400100002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2144,7 +2033,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200100002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2157,7 +2045,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80100002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2170,7 +2057,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100100002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2183,7 +2069,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40100002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2196,7 +2081,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2209,7 +2093,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2222,7 +2105,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2235,7 +2117,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2248,7 +2129,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2261,7 +2141,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2274,7 +2153,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2287,7 +2165,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0020002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2300,7 +2177,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000020002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2313,7 +2189,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400020002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2326,7 +2201,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200020002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2339,7 +2213,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80020002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2352,7 +2225,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100020002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2365,7 +2237,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40020002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2378,7 +2249,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x18000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2391,7 +2261,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC01C8000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2404,7 +2273,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001C8000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2417,7 +2285,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4001C8000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2430,7 +2297,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2001C8000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2443,7 +2309,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x801C8000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2456,7 +2321,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1001C8000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2469,7 +2333,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x401C8000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2482,7 +2345,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0088000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2495,7 +2357,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000088000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2508,7 +2369,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400088000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2521,7 +2381,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200088000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2534,7 +2393,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80088000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2547,7 +2405,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100088000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2560,7 +2417,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40088000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2573,7 +2429,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0048000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2586,7 +2441,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000048000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2599,7 +2453,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400048000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2612,7 +2465,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200048000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2625,7 +2477,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80048000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2638,7 +2489,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100048000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2651,7 +2501,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40048000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2664,7 +2513,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0108000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2677,7 +2525,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000108000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2690,7 +2537,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400108000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2703,7 +2549,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200108000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2716,7 +2561,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80108000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2729,7 +2573,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100108000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2742,7 +2585,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40108000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2755,7 +2597,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2768,7 +2609,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2781,7 +2621,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2794,7 +2633,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2807,7 +2645,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2820,7 +2657,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2833,7 +2669,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2846,7 +2681,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0028000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2859,7 +2693,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000028000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2872,7 +2705,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400028000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2885,7 +2717,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200028000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2898,7 +2729,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80028000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2911,7 +2741,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100028000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2924,7 +2753,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40028000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -2974,4 +2802,4 @@ "SampleAfterValue": "2000003", "UMask": "0x4" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/skylake/memory.json b/tools/perf/pmu-events/arch/x86/skylake/memory.json index 8500fc65e0e8..74ea4ccb4c9a 100644 --- a/tools/perf/pmu-events/arch/x86/skylake/memory.json +++ b/tools/perf/pmu-events/arch/x86/skylake/memory.json @@ -275,7 +275,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x20001C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -288,7 +287,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000080004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -301,7 +299,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000040004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -314,7 +311,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000100004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -327,7 +323,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FFC400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -340,7 +335,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103C400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -353,7 +347,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x43C400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -366,7 +359,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x23C400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -379,7 +371,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0xBC400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -392,7 +383,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x203C400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -405,7 +395,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x13C400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -418,7 +407,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x7C400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -431,7 +419,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC4000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -444,7 +431,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1004000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -457,7 +443,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x404000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -470,7 +455,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x204000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -483,7 +467,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x84000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -496,7 +479,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2004000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -509,7 +491,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x104000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -522,7 +503,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x44000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -535,7 +515,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000400004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -548,7 +527,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000020004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -561,7 +539,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x20001C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -574,7 +551,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000080001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -587,7 +563,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000040001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -600,7 +575,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000100001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -613,7 +587,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FFC400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -626,7 +599,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103C400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -639,7 +611,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x43C400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -652,7 +623,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x23C400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -665,7 +635,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0xBC400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -678,7 +647,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x203C400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -691,7 +659,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x13C400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -704,7 +671,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x7C400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -717,7 +683,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC4000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -730,7 +695,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1004000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -743,7 +707,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x404000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -756,7 +719,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x204000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -769,7 +731,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x84000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -782,7 +743,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2004000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -795,7 +755,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x104000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -808,7 +767,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x44000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -821,7 +779,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000400001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -834,7 +791,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000020001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -847,7 +803,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x20001C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -860,7 +815,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000080002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -873,7 +827,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000040002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -886,7 +839,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000100002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -899,7 +851,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FFC400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -912,7 +863,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103C400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -925,7 +875,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x43C400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -938,7 +887,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x23C400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -951,7 +899,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0xBC400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -964,7 +911,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x203C400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -977,7 +923,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x13C400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -990,7 +935,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x7C400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1003,7 +947,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC4000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1016,7 +959,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1004000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1029,7 +971,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x404000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1042,7 +983,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x204000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1055,7 +995,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x84000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1068,7 +1007,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2004000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1081,7 +1019,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x104000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1094,7 +1031,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x44000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1107,7 +1043,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000400002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1120,7 +1055,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000020002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1133,7 +1067,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x20001C8000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1146,7 +1079,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000088000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1159,7 +1091,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000048000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1172,7 +1103,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000108000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1185,7 +1115,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FFC408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1198,7 +1127,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103C408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1211,7 +1139,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x43C408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1224,7 +1151,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x23C408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1237,7 +1163,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0xBC408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1250,7 +1175,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x203C408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1263,7 +1187,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x13C408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1276,7 +1199,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x7C408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1289,7 +1211,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC4008000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1302,7 +1223,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1004008000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1315,7 +1235,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x404008000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1328,7 +1247,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x204008000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1341,7 +1259,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x84008000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1354,7 +1271,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2004008000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1367,7 +1283,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x104008000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1380,7 +1295,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x44008000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1393,7 +1307,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000408000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1406,7 +1319,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2000028000", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1608,4 +1520,4 @@ "SampleAfterValue": "2000003", "UMask": "0x40" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/skylake/pipeline.json b/tools/perf/pmu-events/arch/x86/skylake/pipeline.json index 12eabae3e224..79fda10ec4bb 100644 --- a/tools/perf/pmu-events/arch/x86/skylake/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/skylake/pipeline.json @@ -417,6 +417,16 @@ "UMask": "0x1" }, { + "BriefDescription": "Instruction decoders utilized in a cycle", + "Counter": "0,1,2,3", + "CounterHTOff": "0,1,2,3,4,5,6,7", + "EventCode": "0x55", + "EventName": "INST_DECODED.DECODERS", + "PublicDescription": "Number of decoders utilized in a cycle when the MITE (legacy decode pipeline) fetches instructions.", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { "BriefDescription": "Instructions retired from execution.", "Counter": "Fixed counter 0", "CounterHTOff": "Fixed counter 0", @@ -969,7 +979,7 @@ "BriefDescription": "Cycles with less than 10 actually retired uops.", "Counter": "0,1,2,3", "CounterHTOff": "0,1,2,3,4,5,6,7", - "CounterMask": "10", + "CounterMask": "16", "EventCode": "0xC2", "EventName": "UOPS_RETIRED.TOTAL_CYCLES", "Invert": "1", @@ -977,4 +987,4 @@ "SampleAfterValue": "2000003", "UMask": "0x2" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/skylakex/cache.json b/tools/perf/pmu-events/arch/x86/skylakex/cache.json index 6639e18a7068..e21010c0df41 100644 --- a/tools/perf/pmu-events/arch/x86/skylakex/cache.json +++ b/tools/perf/pmu-events/arch/x86/skylakex/cache.json @@ -750,7 +750,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10491", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -763,7 +762,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0491", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -776,7 +774,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0491", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -789,7 +786,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0491", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -802,7 +798,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0491", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -815,7 +810,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0491", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -828,7 +822,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10490", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -841,7 +834,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0490", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -854,7 +846,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0490", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -867,7 +858,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0490", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -880,7 +870,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0490", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -893,7 +882,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0490", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -906,7 +894,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10120", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -919,7 +906,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0120", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -932,7 +918,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0120", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -945,7 +930,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0120", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -958,7 +942,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0120", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -971,7 +954,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0120", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -984,7 +966,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10122", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -997,7 +978,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0122", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1010,7 +990,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0122", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1023,7 +1002,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0122", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1036,7 +1014,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0122", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1049,7 +1026,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0122", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1062,7 +1038,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1075,7 +1050,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1088,7 +1062,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1101,7 +1074,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1114,7 +1086,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1127,7 +1098,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1140,7 +1110,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1153,7 +1122,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1166,7 +1134,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1179,7 +1146,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1192,7 +1158,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1205,7 +1170,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1218,7 +1182,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1231,7 +1194,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1244,7 +1206,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1257,7 +1218,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1270,7 +1230,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1283,7 +1242,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1296,7 +1254,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1309,7 +1266,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1322,7 +1278,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1335,7 +1290,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1348,7 +1302,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1361,7 +1314,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1374,7 +1326,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10010", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1387,7 +1338,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0010", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1400,7 +1350,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0010", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1413,7 +1362,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0010", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1426,7 +1374,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0010", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1439,7 +1386,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0010", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1452,7 +1398,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10020", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1465,7 +1410,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0020", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1478,7 +1422,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0020", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1491,7 +1434,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0020", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1504,7 +1446,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0020", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1517,7 +1458,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0020", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1530,7 +1470,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10080", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1543,7 +1482,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0080", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1556,7 +1494,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0080", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1569,7 +1506,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0080", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1582,7 +1518,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0080", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1595,7 +1530,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0080", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1608,7 +1542,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10100", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1621,7 +1554,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0100", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1634,7 +1566,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0100", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1647,7 +1578,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0100", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1660,7 +1590,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0100", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1673,7 +1602,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0100", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1723,4 +1651,4 @@ "SampleAfterValue": "2000003", "UMask": "0x4" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/skylakex/memory.json b/tools/perf/pmu-events/arch/x86/skylakex/memory.json index 60c286b4fe54..a570fe3e7a2d 100644 --- a/tools/perf/pmu-events/arch/x86/skylakex/memory.json +++ b/tools/perf/pmu-events/arch/x86/skylakex/memory.json @@ -275,7 +275,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBC000491", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -288,7 +287,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103FC00491", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -301,7 +299,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x83FC00491", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -314,7 +311,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63FC00491", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -327,7 +323,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x604000491", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -340,7 +335,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63B800491", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -353,7 +347,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBC000490", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -366,7 +359,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103FC00490", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -379,7 +371,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x83FC00490", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -392,7 +383,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63FC00490", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -405,7 +395,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x604000490", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -418,7 +407,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63B800490", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -431,7 +419,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBC000120", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -444,7 +431,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103FC00120", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -457,7 +443,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x83FC00120", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -470,7 +455,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63FC00120", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -483,7 +467,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x604000120", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -496,7 +479,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63B800120", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -509,7 +491,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBC000122", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -522,7 +503,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103FC00122", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -535,7 +515,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x83FC00122", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -548,7 +527,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63FC00122", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -561,7 +539,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x604000122", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -574,7 +551,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63B800122", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -587,7 +563,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBC000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -600,7 +575,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103FC00004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -613,7 +587,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x83FC00004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -626,7 +599,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63FC00004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -639,7 +611,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x604000004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -652,7 +623,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63B800004", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -665,7 +635,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBC000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -678,7 +647,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103FC00001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -691,7 +659,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x83FC00001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -704,7 +671,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63FC00001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -717,7 +683,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x604000001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -730,7 +695,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63B800001", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -743,7 +707,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBC000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -756,7 +719,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103FC00002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -769,7 +731,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x83FC00002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -782,7 +743,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63FC00002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -795,7 +755,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x604000002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -808,7 +767,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63B800002", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -821,7 +779,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBC000400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -834,7 +791,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103FC00400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -847,7 +803,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x83FC00400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -860,7 +815,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63FC00400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -873,7 +827,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x604000400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -886,7 +839,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63B800400", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -899,7 +851,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBC000010", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -912,7 +863,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103FC00010", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -925,7 +875,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x83FC00010", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -938,7 +887,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63FC00010", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -951,7 +899,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x604000010", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -964,7 +911,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63B800010", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -977,7 +923,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBC000020", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -990,7 +935,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103FC00020", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1003,7 +947,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x83FC00020", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1016,7 +959,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63FC00020", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1029,7 +971,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x604000020", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1042,7 +983,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63B800020", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1055,7 +995,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBC000080", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1068,7 +1007,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103FC00080", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1081,7 +1019,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x83FC00080", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1094,7 +1031,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63FC00080", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1107,7 +1043,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x604000080", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1120,7 +1055,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63B800080", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1133,7 +1067,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FBC000100", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1146,7 +1079,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x103FC00100", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1159,7 +1091,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x83FC00100", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1172,7 +1103,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63FC00100", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1185,7 +1115,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x604000100", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1198,7 +1127,6 @@ "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x63B800100", "Offcore": "1", - "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", "SampleAfterValue": "100003", "UMask": "0x1" }, @@ -1400,4 +1328,4 @@ "SampleAfterValue": "2000003", "UMask": "0x40" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json b/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json index 12eabae3e224..79fda10ec4bb 100644 --- a/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json @@ -417,6 +417,16 @@ "UMask": "0x1" }, { + "BriefDescription": "Instruction decoders utilized in a cycle", + "Counter": "0,1,2,3", + "CounterHTOff": "0,1,2,3,4,5,6,7", + "EventCode": "0x55", + "EventName": "INST_DECODED.DECODERS", + "PublicDescription": "Number of decoders utilized in a cycle when the MITE (legacy decode pipeline) fetches instructions.", + "SampleAfterValue": "2000003", + "UMask": "0x1" + }, + { "BriefDescription": "Instructions retired from execution.", "Counter": "Fixed counter 0", "CounterHTOff": "Fixed counter 0", @@ -969,7 +979,7 @@ "BriefDescription": "Cycles with less than 10 actually retired uops.", "Counter": "0,1,2,3", "CounterHTOff": "0,1,2,3,4,5,6,7", - "CounterMask": "10", + "CounterMask": "16", "EventCode": "0xC2", "EventName": "UOPS_RETIRED.TOTAL_CYCLES", "Invert": "1", @@ -977,4 +987,4 @@ "SampleAfterValue": "2000003", "UMask": "0x2" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/skylakex/uncore-memory.json b/tools/perf/pmu-events/arch/x86/skylakex/uncore-memory.json index 0b66e6af8177..4dcbac887380 100644 --- a/tools/perf/pmu-events/arch/x86/skylakex/uncore-memory.json +++ b/tools/perf/pmu-events/arch/x86/skylakex/uncore-memory.json @@ -10,6 +10,16 @@ "Unit": "iMC" }, { + "BriefDescription": "read requests to memory controller", + "Counter": "0,1,2,3", + "EventCode": "0x4", + "EventName": "UNC_M_CAS_COUNT.RD", + "PerPkg": "1", + "ScaleUnit": "64Bytes", + "UMask": "0x3", + "Unit": "iMC" + }, + { "BriefDescription": "write requests to memory controller. Derived from unc_m_cas_count.wr", "Counter": "0,1,2,3", "EventCode": "0x4", @@ -20,6 +30,16 @@ "Unit": "iMC" }, { + "BriefDescription": "write requests to memory controller", + "Counter": "0,1,2,3", + "EventCode": "0x4", + "EventName": "UNC_M_CAS_COUNT.WR", + "PerPkg": "1", + "ScaleUnit": "64Bytes", + "UMask": "0xC", + "Unit": "iMC" + }, + { "BriefDescription": "Memory controller clock ticks", "Counter": "0,1,2,3", "EventName": "UNC_M_CLOCKTICKS", diff --git a/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json b/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json index 06c5ca26ca3f..aa0f67613c4a 100644 --- a/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json +++ b/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json @@ -17,6 +17,16 @@ "Unit": "CHA" }, { + "BriefDescription": "LLC misses - Uncacheable reads (from cpu) ", + "Counter": "0,1,2,3", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x40e33", + "PerPkg": "1", + "UMask": "0x21", + "Unit": "CHA" + }, + { "BriefDescription": "MMIO reads. Derived from unc_cha_tor_inserts.ia_miss", "Counter": "0,1,2,3", "EventCode": "0x35", @@ -27,6 +37,16 @@ "Unit": "CHA" }, { + "BriefDescription": "MMIO reads", + "Counter": "0,1,2,3", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x40040e33", + "PerPkg": "1", + "UMask": "0x21", + "Unit": "CHA" + }, + { "BriefDescription": "MMIO writes. Derived from unc_cha_tor_inserts.ia_miss", "Counter": "0,1,2,3", "EventCode": "0x35", @@ -37,6 +57,16 @@ "Unit": "CHA" }, { + "BriefDescription": "MMIO writes", + "Counter": "0,1,2,3", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x40041e33", + "PerPkg": "1", + "UMask": "0x21", + "Unit": "CHA" + }, + { "BriefDescription": "Streaming stores (full cache line). Derived from unc_cha_tor_inserts.ia_miss", "Counter": "0,1,2,3", "EventCode": "0x35", @@ -48,6 +78,17 @@ "Unit": "CHA" }, { + "BriefDescription": "Streaming stores (full cache line)", + "Counter": "0,1,2,3", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x41833", + "PerPkg": "1", + "ScaleUnit": "64Bytes", + "UMask": "0x21", + "Unit": "CHA" + }, + { "BriefDescription": "Streaming stores (partial cache line). Derived from unc_cha_tor_inserts.ia_miss", "Counter": "0,1,2,3", "EventCode": "0x35", @@ -59,6 +100,17 @@ "Unit": "CHA" }, { + "BriefDescription": "Streaming stores (partial cache line)", + "Counter": "0,1,2,3", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x41a33", + "PerPkg": "1", + "ScaleUnit": "64Bytes", + "UMask": "0x21", + "Unit": "CHA" + }, + { "BriefDescription": "read requests from home agent", "Counter": "0,1,2,3", "EventCode": "0x50", @@ -114,6 +166,16 @@ "Unit": "UPI LL" }, { + "BriefDescription": "UPI interconnect send bandwidth for payload", + "Counter": "0,1,2,3", + "EventCode": "0x2", + "EventName": "UNC_UPI_TxL_FLITS.ALL_DATA", + "PerPkg": "1", + "ScaleUnit": "7.11E-06Bytes", + "UMask": "0xf", + "Unit": "UPI LL" + }, + { "BriefDescription": "PCI Express bandwidth reading at IIO, part 0", "Counter": "0,1", "EventCode": "0x83", @@ -177,6 +239,21 @@ "Unit": "IIO" }, { + "BriefDescription": "PCI Express bandwidth reading at IIO", + "Counter": "0,1", + "EventCode": "0x83", + "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0", + "FCMask": "0x07", + "Filter": "ch_mask=0x1f", + "MetricExpr": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0 +UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART1 +UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART2 +UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART3", + "MetricName": "LLC_MISSES.PCIE_READ", + "PerPkg": "1", + "PortMask": "0x01", + "ScaleUnit": "4Bytes", + "UMask": "0x04", + "Unit": "IIO" + }, + { "BriefDescription": "PCI Express bandwidth writing at IIO, part 0", "Counter": "0,1", "EventCode": "0x83", @@ -240,6 +317,21 @@ "Unit": "IIO" }, { + "BriefDescription": "PCI Express bandwidth writing at IIO", + "Counter": "0,1", + "EventCode": "0x83", + "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0", + "FCMask": "0x07", + "Filter": "ch_mask=0x1f", + "MetricExpr": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3", + "MetricName": "LLC_MISSES.PCIE_WRITE", + "PerPkg": "1", + "PortMask": "0x01", + "ScaleUnit": "4Bytes", + "UMask": "0x01", + "Unit": "IIO" + }, + { "BriefDescription": "Core Cross Snoops Issued; Multiple Core Requests", "Counter": "0,1,2,3", "EventCode": "0x33", @@ -514,7 +606,7 @@ "EventCode": "0x5C", "EventName": "UNC_CHA_SNOOP_RESP.RSP_FWD_WB", "PerPkg": "1", - "PublicDescription": "Counts when a transaction with the opcode type Rsp*Fwd*WB Snoop Response was received which indicates the data was written back to it's home socket, and the cacheline was forwarded to the requestor socket. This snoop response is only used in >= 4 socket systems. It is used when a snoop HITM's in a remote caching agent and it directly forwards data to a requestor, and simultaneously returns data to it's home socket to be written back to memory.", + "PublicDescription": "Counts when a transaction with the opcode type Rsp*Fwd*WB Snoop Response was received which indicates the data was written back to its home socket, and the cacheline was forwarded to the requestor socket. This snoop response is only used in >= 4 socket systems. It is used when a snoop HITM's in a remote caching agent and it directly forwards data to a requestor, and simultaneously returns data to its home socket to be written back to memory.", "UMask": "0x20", "Unit": "CHA" }, @@ -524,7 +616,7 @@ "EventCode": "0x5C", "EventName": "UNC_CHA_SNOOP_RESP.RSP_WBWB", "PerPkg": "1", - "PublicDescription": "Counts when a transaction with the opcode type Rsp*WB Snoop Response was received which indicates which indicates the data was written back to it's home. This is returned when a non-RFO request hits a cacheline in the Modified state. The Cache can either downgrade the cacheline to a S (Shared) or I (Invalid) state depending on how the system has been configured. This reponse will also be sent when a cache requests E (Exclusive) ownership of a cache line without receiving data, because the cache must acquire ownership.", + "PublicDescription": "Counts when a transaction with the opcode type Rsp*WB Snoop Response was received which indicates which indicates the data was written back to its home. This is returned when a non-RFO request hits a cacheline in the Modified state. The Cache can either downgrade the cacheline to a S (Shared) or I (Invalid) state depending on how the system has been configured. This response will also be sent when a cache requests E (Exclusive) ownership of a cache line without receiving data, because the cache must acquire ownership.", "UMask": "0x10", "Unit": "CHA" }, diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/other.json b/tools/perf/pmu-events/arch/x86/tigerlake/other.json index 304cd09fe159..65539490e18f 100644 --- a/tools/perf/pmu-events/arch/x86/tigerlake/other.json +++ b/tools/perf/pmu-events/arch/x86/tigerlake/other.json @@ -1,16 +1,5 @@ [ { - "BriefDescription": "Number of occurrences where a microcode assist is invoked by hardware.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", - "EventCode": "0xc1", - "EventName": "ASSISTS.ANY", - "PEBScounters": "0,1,2,3,4,5,6,7", - "PublicDescription": "Counts the number of occurrences where a microcode assist is invoked by hardware Examples include AD (page Access Dirty), FP and AVX related assists.", - "SampleAfterValue": "100003", - "UMask": "0x7" - }, - { "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the Non-AVX turbo schedule.", "CollectPEBSRecord": "2", "Counter": "0,1,2,3", @@ -57,4 +46,4 @@ "SampleAfterValue": "100003", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/pipeline.json b/tools/perf/pmu-events/arch/x86/tigerlake/pipeline.json index d436775c80db..a8aa1b455c77 100644 --- a/tools/perf/pmu-events/arch/x86/tigerlake/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/tigerlake/pipeline.json @@ -12,6 +12,17 @@ "UMask": "0x9" }, { + "BriefDescription": "Number of occurrences where a microcode assist is invoked by hardware.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3,4,5,6,7", + "EventCode": "0xc1", + "EventName": "ASSISTS.ANY", + "PEBScounters": "0,1,2,3,4,5,6,7", + "PublicDescription": "Counts the number of occurrences where a microcode assist is invoked by hardware Examples include AD (page Access Dirty), FP and AVX related assists.", + "SampleAfterValue": "100003", + "UMask": "0x7" + }, + { "BriefDescription": "All branch instructions retired.", "CollectPEBSRecord": "2", "Counter": "0,1,2,3,4,5,6,7", @@ -1055,4 +1066,4 @@ "SampleAfterValue": "1000003", "UMask": "0x2" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/tremontx/other.json b/tools/perf/pmu-events/arch/x86/tremontx/other.json index 4f20f45a4898..2766e9dfc325 100644 --- a/tools/perf/pmu-events/arch/x86/tremontx/other.json +++ b/tools/perf/pmu-events/arch/x86/tremontx/other.json @@ -1,16 +1,5 @@ [ { - "BriefDescription": "Counts the total number of BTCLEARS.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", - "EventCode": "0xe8", - "EventName": "BTCLEAR.ANY", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", - "PublicDescription": "Counts the total number of BTCLEARS which occurs when the Branch Target Buffer (BTB) predicts a taken branch.", - "SampleAfterValue": "200003" - }, - { "BriefDescription": "This event is deprecated. Refer to new event BUS_LOCK.SELF_LOCKS", "CollectPEBSRecord": "2", "Counter": "0,1,2,3", @@ -683,4 +672,4 @@ "SampleAfterValue": "100003", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/tremontx/pipeline.json b/tools/perf/pmu-events/arch/x86/tremontx/pipeline.json index 0a77e9f9a16a..38dc8044767b 100644 --- a/tools/perf/pmu-events/arch/x86/tremontx/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/tremontx/pipeline.json @@ -165,6 +165,17 @@ "UMask": "0xfe" }, { + "BriefDescription": "Counts the total number of BTCLEARS.", + "CollectPEBSRecord": "2", + "Counter": "0,1,2,3", + "EventCode": "0xe8", + "EventName": "BTCLEAR.ANY", + "PDIR_COUNTER": "na", + "PEBScounters": "0,1,2,3", + "PublicDescription": "Counts the total number of BTCLEARS which occurs when the Branch Target Buffer (BTB) predicts a taken branch.", + "SampleAfterValue": "200003" + }, + { "BriefDescription": "Counts the number of unhalted core clock cycles. (Fixed event)", "CollectPEBSRecord": "2", "Counter": "Fixed counter 1", @@ -671,4 +682,4 @@ "SampleAfterValue": "2000003", "UMask": "0x2" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/tremontx/uncore-memory.json b/tools/perf/pmu-events/arch/x86/tremontx/uncore-memory.json index 0d342efae154..b7ff25a5d717 100644 --- a/tools/perf/pmu-events/arch/x86/tremontx/uncore-memory.json +++ b/tools/perf/pmu-events/arch/x86/tremontx/uncore-memory.json @@ -11,6 +11,17 @@ "Unit": "iMC" }, { + "BriefDescription": "read requests to memory controller", + "Counter": "0,1,2,3", + "CounterType": "PGMABLE", + "EventCode": "0x04", + "EventName": "UNC_M_CAS_COUNT.RD", + "PerPkg": "1", + "ScaleUnit": "64Bytes", + "UMask": "0x0f", + "Unit": "iMC" + }, + { "BriefDescription": "write requests to memory controller. Derived from unc_m_cas_count.wr", "Counter": "0,1,2,3", "CounterType": "PGMABLE", @@ -22,6 +33,17 @@ "Unit": "iMC" }, { + "BriefDescription": "write requests to memory controller", + "Counter": "0,1,2,3", + "CounterType": "PGMABLE", + "EventCode": "0x04", + "EventName": "UNC_M_CAS_COUNT.WR", + "PerPkg": "1", + "ScaleUnit": "64Bytes", + "UMask": "0x30", + "Unit": "iMC" + }, + { "BriefDescription": "Memory controller clock ticks", "Counter": "0,1,2,3", "CounterType": "PGMABLE", diff --git a/tools/perf/pmu-events/arch/x86/tremontx/uncore-other.json b/tools/perf/pmu-events/arch/x86/tremontx/uncore-other.json index 0f73582248f9..5194ce1b4390 100644 --- a/tools/perf/pmu-events/arch/x86/tremontx/uncore-other.json +++ b/tools/perf/pmu-events/arch/x86/tremontx/uncore-other.json @@ -20,6 +20,18 @@ "Unit": "CHA" }, { + "BriefDescription": "LLC misses - Uncacheable reads (from cpu) ", + "Counter": "0,1,2,3", + "CounterType": "PGMABLE", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x40e33", + "PerPkg": "1", + "UMask": "0xC001FE01", + "UMaskExt": "0xC001FE", + "Unit": "CHA" + }, + { "BriefDescription": "MMIO reads. Derived from unc_cha_tor_inserts.ia_miss", "Counter": "0,1,2,3", "CounterType": "PGMABLE", @@ -32,6 +44,18 @@ "Unit": "CHA" }, { + "BriefDescription": "MMIO reads", + "Counter": "0,1,2,3", + "CounterType": "PGMABLE", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x40040e33", + "PerPkg": "1", + "UMask": "0xC001FE01", + "UMaskExt": "0xC001FE", + "Unit": "CHA" + }, + { "BriefDescription": "MMIO writes. Derived from unc_cha_tor_inserts.ia_miss", "Counter": "0,1,2,3", "CounterType": "PGMABLE", @@ -44,6 +68,18 @@ "Unit": "CHA" }, { + "BriefDescription": "MMIO writes", + "Counter": "0,1,2,3", + "CounterType": "PGMABLE", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x40041e33", + "PerPkg": "1", + "UMask": "0xC001FE01", + "UMaskExt": "0xC001FE", + "Unit": "CHA" + }, + { "BriefDescription": "Streaming stores (full cache line). Derived from unc_cha_tor_inserts.ia_miss", "Counter": "0,1,2,3", "CounterType": "PGMABLE", @@ -57,6 +93,19 @@ "Unit": "CHA" }, { + "BriefDescription": "Streaming stores (full cache line)", + "Counter": "0,1,2,3", + "CounterType": "PGMABLE", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x41833", + "PerPkg": "1", + "ScaleUnit": "64Bytes", + "UMask": "0xC001FE01", + "UMaskExt": "0xC001FE", + "Unit": "CHA" + }, + { "BriefDescription": "Streaming stores (partial cache line). Derived from unc_cha_tor_inserts.ia_miss", "Counter": "0,1,2,3", "CounterType": "PGMABLE", @@ -70,6 +119,19 @@ "Unit": "CHA" }, { + "BriefDescription": "Streaming stores (partial cache line)", + "Counter": "0,1,2,3", + "CounterType": "PGMABLE", + "EventCode": "0x35", + "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS", + "Filter": "config1=0x41a33", + "PerPkg": "1", + "ScaleUnit": "64Bytes", + "UMask": "0xC001FE01", + "UMaskExt": "0xC001FE", + "Unit": "CHA" + }, + { "BriefDescription": "read requests from home agent", "Counter": "0,1,2,3", "CounterType": "PGMABLE", @@ -106,6 +168,22 @@ "Unit": "IIO" }, { + "BriefDescription": "PCI Express bandwidth reading at IIO", + "Counter": "0,1", + "CounterType": "PGMABLE", + "EventCode": "0x83", + "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0", + "FCMask": "0x07", + "Filter": "ch_mask=0x1f", + "MetricExpr": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0 +UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART1 +UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART2 +UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART3", + "MetricName": "LLC_MISSES.PCIE_READ", + "PerPkg": "1", + "PortMask": "0x01", + "ScaleUnit": "4Bytes", + "UMask": "0x04", + "Unit": "IIO" + }, + { "BriefDescription": "PCI Express bandwidth writing at IIO. Derived from unc_iio_data_req_of_cpu.mem_write.part0", "Counter": "0,1", "CounterType": "PGMABLE", @@ -122,6 +200,22 @@ "Unit": "IIO" }, { + "BriefDescription": "PCI Express bandwidth writing at IIO", + "Counter": "0,1", + "CounterType": "PGMABLE", + "EventCode": "0x83", + "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0", + "FCMask": "0x07", + "Filter": "ch_mask=0x1f", + "MetricExpr": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3", + "MetricName": "LLC_MISSES.PCIE_WRITE", + "PerPkg": "1", + "PortMask": "0x01", + "ScaleUnit": "4Bytes", + "UMask": "0x01", + "Unit": "IIO" + }, + { "BriefDescription": "PCI Express bandwidth writing at IIO, part 1", "Counter": "0,1", "CounterType": "PGMABLE", diff --git a/tools/perf/pmu-events/arch/x86/westmereep-dp/other.json b/tools/perf/pmu-events/arch/x86/westmereep-dp/other.json index 23dcd554728c..67bc34984fa8 100644 --- a/tools/perf/pmu-events/arch/x86/westmereep-dp/other.json +++ b/tools/perf/pmu-events/arch/x86/westmereep-dp/other.json @@ -1,29 +1,5 @@ [ { - "BriefDescription": "Early Branch Prediciton Unit clears", - "Counter": "0,1,2,3", - "EventCode": "0xE8", - "EventName": "BPU_CLEARS.EARLY", - "SampleAfterValue": "2000000", - "UMask": "0x1" - }, - { - "BriefDescription": "Late Branch Prediction Unit clears", - "Counter": "0,1,2,3", - "EventCode": "0xE8", - "EventName": "BPU_CLEARS.LATE", - "SampleAfterValue": "2000000", - "UMask": "0x2" - }, - { - "BriefDescription": "Branch prediction unit missed call or return", - "Counter": "0,1,2,3", - "EventCode": "0xE5", - "EventName": "BPU_MISSED_CALL_RET", - "SampleAfterValue": "2000000", - "UMask": "0x1" - }, - { "BriefDescription": "ES segment renames", "Counter": "0,1,2,3", "EventCode": "0xD5", @@ -128,46 +104,6 @@ "UMask": "0x1" }, { - "BriefDescription": "All RAT stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.ANY", - "SampleAfterValue": "2000000", - "UMask": "0xf" - }, - { - "BriefDescription": "Flag stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.FLAGS", - "SampleAfterValue": "2000000", - "UMask": "0x1" - }, - { - "BriefDescription": "Partial register stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.REGISTERS", - "SampleAfterValue": "2000000", - "UMask": "0x2" - }, - { - "BriefDescription": "ROB read port stalls cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.ROB_READ_PORT", - "SampleAfterValue": "2000000", - "UMask": "0x4" - }, - { - "BriefDescription": "Scoreboard stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.SCOREBOARD", - "SampleAfterValue": "2000000", - "UMask": "0x8" - }, - { "BriefDescription": "All Store buffer stall cycles", "Counter": "0,1,2,3", "EventCode": "0x4", @@ -284,4 +220,4 @@ "SampleAfterValue": "2000000", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/westmereep-dp/pipeline.json b/tools/perf/pmu-events/arch/x86/westmereep-dp/pipeline.json index 10140f460fbb..403fb2b87fc4 100644 --- a/tools/perf/pmu-events/arch/x86/westmereep-dp/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/westmereep-dp/pipeline.json @@ -51,6 +51,30 @@ "UMask": "0x1" }, { + "BriefDescription": "Early Branch Prediciton Unit clears", + "Counter": "0,1,2,3", + "EventCode": "0xE8", + "EventName": "BPU_CLEARS.EARLY", + "SampleAfterValue": "2000000", + "UMask": "0x1" + }, + { + "BriefDescription": "Late Branch Prediction Unit clears", + "Counter": "0,1,2,3", + "EventCode": "0xE8", + "EventName": "BPU_CLEARS.LATE", + "SampleAfterValue": "2000000", + "UMask": "0x2" + }, + { + "BriefDescription": "Branch prediction unit missed call or return", + "Counter": "0,1,2,3", + "EventCode": "0xE5", + "EventName": "BPU_MISSED_CALL_RET", + "SampleAfterValue": "2000000", + "UMask": "0x1" + }, + { "BriefDescription": "Branch instructions decoded", "Counter": "0,1,2,3", "EventCode": "0xE0", @@ -495,6 +519,46 @@ "UMask": "0x4" }, { + "BriefDescription": "All RAT stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.ANY", + "SampleAfterValue": "2000000", + "UMask": "0xf" + }, + { + "BriefDescription": "Flag stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.FLAGS", + "SampleAfterValue": "2000000", + "UMask": "0x1" + }, + { + "BriefDescription": "Partial register stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.REGISTERS", + "SampleAfterValue": "2000000", + "UMask": "0x2" + }, + { + "BriefDescription": "ROB read port stalls cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.ROB_READ_PORT", + "SampleAfterValue": "2000000", + "UMask": "0x4" + }, + { + "BriefDescription": "Scoreboard stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.SCOREBOARD", + "SampleAfterValue": "2000000", + "UMask": "0x8" + }, + { "BriefDescription": "Resource related stall cycles", "Counter": "0,1,2,3", "EventCode": "0xA2", @@ -896,4 +960,4 @@ "SampleAfterValue": "2000000", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/westmereep-sp/cache.json b/tools/perf/pmu-events/arch/x86/westmereep-sp/cache.json index 2ecd80f8fa67..c5f33fe2a3ce 100644 --- a/tools/perf/pmu-events/arch/x86/westmereep-sp/cache.json +++ b/tools/perf/pmu-events/arch/x86/westmereep-sp/cache.json @@ -1769,7 +1769,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches satisfied by the IO, CSR, MMIO unit", + "BriefDescription": "Offcore data reads, RFOs, and prefetches satisfied by the IO, CSR, MMIO unit", "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DATA_IN.IO_CSR_MMIO", @@ -1780,7 +1780,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches statisfied by the LLC and not found in a sibling core", + "BriefDescription": "Offcore data reads, RFOs, and prefetches satisfied by the LLC and not found in a sibling core", "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DATA_IN.LLC_HIT_NO_OTHER_CORE", @@ -1791,7 +1791,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches satisfied by the LLC and HIT in a sibling core", + "BriefDescription": "Offcore data reads, RFOs, and prefetches satisfied by the LLC and HIT in a sibling core", "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DATA_IN.LLC_HIT_OTHER_CORE_HIT", @@ -1802,7 +1802,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches satisfied by the LLC and HITM in a sibling core", + "BriefDescription": "Offcore data reads, RFOs, and prefetches satisfied by the LLC and HITM in a sibling core", "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DATA_IN.LLC_HIT_OTHER_CORE_HITM", @@ -1857,7 +1857,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches that HIT in a remote cache", + "BriefDescription": "Offcore data reads, RFOs, and prefetches that HIT in a remote cache", "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DATA_IN.REMOTE_CACHE_HIT", @@ -1868,7 +1868,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches that HITM in a remote cache", + "BriefDescription": "Offcore data reads, RFOs, and prefetches that HITM in a remote cache", "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DATA_IN.REMOTE_CACHE_HITM", @@ -3230,4 +3230,4 @@ "SampleAfterValue": "200000", "UMask": "0x8" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/westmereep-sp/memory.json b/tools/perf/pmu-events/arch/x86/westmereep-sp/memory.json index 623a0087c8f3..f14e760a9ddc 100644 --- a/tools/perf/pmu-events/arch/x86/westmereep-sp/memory.json +++ b/tools/perf/pmu-events/arch/x86/westmereep-sp/memory.json @@ -286,7 +286,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches statisfied by the local DRAM.", + "BriefDescription": "Offcore data reads, RFOs, and prefetches satisfied by the local DRAM.", "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DATA_IN.LOCAL_DRAM", @@ -297,7 +297,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches statisfied by the remote DRAM", + "BriefDescription": "Offcore data reads, RFOs, and prefetches satisfied by the remote DRAM", "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DATA_IN.REMOTE_DRAM", @@ -736,4 +736,4 @@ "SampleAfterValue": "100000", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/westmereep-sp/other.json b/tools/perf/pmu-events/arch/x86/westmereep-sp/other.json index 23dcd554728c..67bc34984fa8 100644 --- a/tools/perf/pmu-events/arch/x86/westmereep-sp/other.json +++ b/tools/perf/pmu-events/arch/x86/westmereep-sp/other.json @@ -1,29 +1,5 @@ [ { - "BriefDescription": "Early Branch Prediciton Unit clears", - "Counter": "0,1,2,3", - "EventCode": "0xE8", - "EventName": "BPU_CLEARS.EARLY", - "SampleAfterValue": "2000000", - "UMask": "0x1" - }, - { - "BriefDescription": "Late Branch Prediction Unit clears", - "Counter": "0,1,2,3", - "EventCode": "0xE8", - "EventName": "BPU_CLEARS.LATE", - "SampleAfterValue": "2000000", - "UMask": "0x2" - }, - { - "BriefDescription": "Branch prediction unit missed call or return", - "Counter": "0,1,2,3", - "EventCode": "0xE5", - "EventName": "BPU_MISSED_CALL_RET", - "SampleAfterValue": "2000000", - "UMask": "0x1" - }, - { "BriefDescription": "ES segment renames", "Counter": "0,1,2,3", "EventCode": "0xD5", @@ -128,46 +104,6 @@ "UMask": "0x1" }, { - "BriefDescription": "All RAT stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.ANY", - "SampleAfterValue": "2000000", - "UMask": "0xf" - }, - { - "BriefDescription": "Flag stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.FLAGS", - "SampleAfterValue": "2000000", - "UMask": "0x1" - }, - { - "BriefDescription": "Partial register stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.REGISTERS", - "SampleAfterValue": "2000000", - "UMask": "0x2" - }, - { - "BriefDescription": "ROB read port stalls cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.ROB_READ_PORT", - "SampleAfterValue": "2000000", - "UMask": "0x4" - }, - { - "BriefDescription": "Scoreboard stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.SCOREBOARD", - "SampleAfterValue": "2000000", - "UMask": "0x8" - }, - { "BriefDescription": "All Store buffer stall cycles", "Counter": "0,1,2,3", "EventCode": "0x4", @@ -284,4 +220,4 @@ "SampleAfterValue": "2000000", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/westmereep-sp/pipeline.json b/tools/perf/pmu-events/arch/x86/westmereep-sp/pipeline.json index 10140f460fbb..403fb2b87fc4 100644 --- a/tools/perf/pmu-events/arch/x86/westmereep-sp/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/westmereep-sp/pipeline.json @@ -51,6 +51,30 @@ "UMask": "0x1" }, { + "BriefDescription": "Early Branch Prediciton Unit clears", + "Counter": "0,1,2,3", + "EventCode": "0xE8", + "EventName": "BPU_CLEARS.EARLY", + "SampleAfterValue": "2000000", + "UMask": "0x1" + }, + { + "BriefDescription": "Late Branch Prediction Unit clears", + "Counter": "0,1,2,3", + "EventCode": "0xE8", + "EventName": "BPU_CLEARS.LATE", + "SampleAfterValue": "2000000", + "UMask": "0x2" + }, + { + "BriefDescription": "Branch prediction unit missed call or return", + "Counter": "0,1,2,3", + "EventCode": "0xE5", + "EventName": "BPU_MISSED_CALL_RET", + "SampleAfterValue": "2000000", + "UMask": "0x1" + }, + { "BriefDescription": "Branch instructions decoded", "Counter": "0,1,2,3", "EventCode": "0xE0", @@ -495,6 +519,46 @@ "UMask": "0x4" }, { + "BriefDescription": "All RAT stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.ANY", + "SampleAfterValue": "2000000", + "UMask": "0xf" + }, + { + "BriefDescription": "Flag stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.FLAGS", + "SampleAfterValue": "2000000", + "UMask": "0x1" + }, + { + "BriefDescription": "Partial register stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.REGISTERS", + "SampleAfterValue": "2000000", + "UMask": "0x2" + }, + { + "BriefDescription": "ROB read port stalls cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.ROB_READ_PORT", + "SampleAfterValue": "2000000", + "UMask": "0x4" + }, + { + "BriefDescription": "Scoreboard stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.SCOREBOARD", + "SampleAfterValue": "2000000", + "UMask": "0x8" + }, + { "BriefDescription": "Resource related stall cycles", "Counter": "0,1,2,3", "EventCode": "0xA2", @@ -896,4 +960,4 @@ "SampleAfterValue": "2000000", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/westmereex/cache.json b/tools/perf/pmu-events/arch/x86/westmereex/cache.json index 23de93ea347a..d6243d008bfe 100644 --- a/tools/perf/pmu-events/arch/x86/westmereex/cache.json +++ b/tools/perf/pmu-events/arch/x86/westmereex/cache.json @@ -1761,7 +1761,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches satisfied by the IO, CSR, MMIO unit", + "BriefDescription": "Offcore data reads, RFOs, and prefetches satisfied by the IO, CSR, MMIO unit", "Counter": "2", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DATA_IN.IO_CSR_MMIO", @@ -1772,7 +1772,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches statisfied by the LLC and not found in a sibling core", + "BriefDescription": "Offcore data reads, RFOs, and prefetches satisfied by the LLC and not found in a sibling core", "Counter": "2", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DATA_IN.LLC_HIT_NO_OTHER_CORE", @@ -1783,7 +1783,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches satisfied by the LLC and HIT in a sibling core", + "BriefDescription": "Offcore data reads, RFOs, and prefetches satisfied by the LLC and HIT in a sibling core", "Counter": "2", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DATA_IN.LLC_HIT_OTHER_CORE_HIT", @@ -1794,7 +1794,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches satisfied by the LLC and HITM in a sibling core", + "BriefDescription": "Offcore data reads, RFOs, and prefetches satisfied by the LLC and HITM in a sibling core", "Counter": "2", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DATA_IN.LLC_HIT_OTHER_CORE_HITM", @@ -1849,7 +1849,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches that HIT in a remote cache", + "BriefDescription": "Offcore data reads, RFOs, and prefetches that HIT in a remote cache", "Counter": "2", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DATA_IN.REMOTE_CACHE_HIT", @@ -1860,7 +1860,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches that HITM in a remote cache", + "BriefDescription": "Offcore data reads, RFOs, and prefetches that HITM in a remote cache", "Counter": "2", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DATA_IN.REMOTE_CACHE_HITM", @@ -3222,4 +3222,4 @@ "SampleAfterValue": "200000", "UMask": "0x8" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/westmereex/memory.json b/tools/perf/pmu-events/arch/x86/westmereex/memory.json index a2132858b9c1..1f8cfabe08c0 100644 --- a/tools/perf/pmu-events/arch/x86/westmereex/memory.json +++ b/tools/perf/pmu-events/arch/x86/westmereex/memory.json @@ -294,7 +294,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches statisfied by the local DRAM.", + "BriefDescription": "Offcore data reads, RFOs, and prefetches satisfied by the local DRAM.", "Counter": "2", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DATA_IN.LOCAL_DRAM", @@ -305,7 +305,7 @@ "UMask": "0x1" }, { - "BriefDescription": "Offcore data reads, RFO's and prefetches statisfied by the remote DRAM", + "BriefDescription": "Offcore data reads, RFOs, and prefetches satisfied by the remote DRAM", "Counter": "2", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DATA_IN.REMOTE_DRAM", @@ -744,4 +744,4 @@ "SampleAfterValue": "100000", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/westmereex/other.json b/tools/perf/pmu-events/arch/x86/westmereex/other.json index 23dcd554728c..67bc34984fa8 100644 --- a/tools/perf/pmu-events/arch/x86/westmereex/other.json +++ b/tools/perf/pmu-events/arch/x86/westmereex/other.json @@ -1,29 +1,5 @@ [ { - "BriefDescription": "Early Branch Prediciton Unit clears", - "Counter": "0,1,2,3", - "EventCode": "0xE8", - "EventName": "BPU_CLEARS.EARLY", - "SampleAfterValue": "2000000", - "UMask": "0x1" - }, - { - "BriefDescription": "Late Branch Prediction Unit clears", - "Counter": "0,1,2,3", - "EventCode": "0xE8", - "EventName": "BPU_CLEARS.LATE", - "SampleAfterValue": "2000000", - "UMask": "0x2" - }, - { - "BriefDescription": "Branch prediction unit missed call or return", - "Counter": "0,1,2,3", - "EventCode": "0xE5", - "EventName": "BPU_MISSED_CALL_RET", - "SampleAfterValue": "2000000", - "UMask": "0x1" - }, - { "BriefDescription": "ES segment renames", "Counter": "0,1,2,3", "EventCode": "0xD5", @@ -128,46 +104,6 @@ "UMask": "0x1" }, { - "BriefDescription": "All RAT stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.ANY", - "SampleAfterValue": "2000000", - "UMask": "0xf" - }, - { - "BriefDescription": "Flag stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.FLAGS", - "SampleAfterValue": "2000000", - "UMask": "0x1" - }, - { - "BriefDescription": "Partial register stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.REGISTERS", - "SampleAfterValue": "2000000", - "UMask": "0x2" - }, - { - "BriefDescription": "ROB read port stalls cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.ROB_READ_PORT", - "SampleAfterValue": "2000000", - "UMask": "0x4" - }, - { - "BriefDescription": "Scoreboard stall cycles", - "Counter": "0,1,2,3", - "EventCode": "0xD2", - "EventName": "RAT_STALLS.SCOREBOARD", - "SampleAfterValue": "2000000", - "UMask": "0x8" - }, - { "BriefDescription": "All Store buffer stall cycles", "Counter": "0,1,2,3", "EventCode": "0x4", @@ -284,4 +220,4 @@ "SampleAfterValue": "2000000", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/pmu-events/arch/x86/westmereex/pipeline.json b/tools/perf/pmu-events/arch/x86/westmereex/pipeline.json index 620d9084d860..7d6c2c1e0db0 100644 --- a/tools/perf/pmu-events/arch/x86/westmereex/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/westmereex/pipeline.json @@ -51,6 +51,30 @@ "UMask": "0x1" }, { + "BriefDescription": "Early Branch Prediciton Unit clears", + "Counter": "0,1,2,3", + "EventCode": "0xE8", + "EventName": "BPU_CLEARS.EARLY", + "SampleAfterValue": "2000000", + "UMask": "0x1" + }, + { + "BriefDescription": "Late Branch Prediction Unit clears", + "Counter": "0,1,2,3", + "EventCode": "0xE8", + "EventName": "BPU_CLEARS.LATE", + "SampleAfterValue": "2000000", + "UMask": "0x2" + }, + { + "BriefDescription": "Branch prediction unit missed call or return", + "Counter": "0,1,2,3", + "EventCode": "0xE5", + "EventName": "BPU_MISSED_CALL_RET", + "SampleAfterValue": "2000000", + "UMask": "0x1" + }, + { "BriefDescription": "Branch instructions decoded", "Counter": "0,1,2,3", "EventCode": "0xE0", @@ -495,6 +519,46 @@ "UMask": "0x4" }, { + "BriefDescription": "All RAT stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.ANY", + "SampleAfterValue": "2000000", + "UMask": "0xf" + }, + { + "BriefDescription": "Flag stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.FLAGS", + "SampleAfterValue": "2000000", + "UMask": "0x1" + }, + { + "BriefDescription": "Partial register stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.REGISTERS", + "SampleAfterValue": "2000000", + "UMask": "0x2" + }, + { + "BriefDescription": "ROB read port stalls cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.ROB_READ_PORT", + "SampleAfterValue": "2000000", + "UMask": "0x4" + }, + { + "BriefDescription": "Scoreboard stall cycles", + "Counter": "0,1,2,3", + "EventCode": "0xD2", + "EventName": "RAT_STALLS.SCOREBOARD", + "SampleAfterValue": "2000000", + "UMask": "0x8" + }, + { "BriefDescription": "Resource related stall cycles", "Counter": "0,1,2,3", "EventCode": "0xA2", @@ -894,4 +958,4 @@ "SampleAfterValue": "2000000", "UMask": "0x1" } -]
\ No newline at end of file +] diff --git a/tools/perf/tests/builtin-test.c b/tools/perf/tests/builtin-test.c index fac3717d9ba1..3c34cb766724 100644 --- a/tools/perf/tests/builtin-test.c +++ b/tools/perf/tests/builtin-test.c @@ -296,7 +296,9 @@ static const char *shell_test__description(char *description, size_t size, #define for_each_shell_test(entlist, nr, base, ent) \ for (int __i = 0; __i < nr && (ent = entlist[__i]); __i++) \ - if (!is_directory(base, ent) && ent->d_name[0] != '.') + if (!is_directory(base, ent) && \ + is_executable_file(base, ent) && \ + ent->d_name[0] != '.') static const char *shell_tests__dir(char *path, size_t size) { diff --git a/tools/perf/tests/shell/record.sh b/tools/perf/tests/shell/record.sh new file mode 100755 index 000000000000..d98f4d4a00e1 --- /dev/null +++ b/tools/perf/tests/shell/record.sh @@ -0,0 +1,44 @@ +#!/bin/sh +# perf record tests +# SPDX-License-Identifier: GPL-2.0 + +set -e + +err=0 +test_per_thread() { + echo "Basic --per-thread mode test" + perf record -e instructions:u --per-thread -o- true 2> /dev/null \ + | perf report -i- -q \ + | egrep -q true + echo "Basic --per-thread mode test [Success]" +} + +test_register_capture() { + echo "Register capture test" + if ! perf list | egrep -q 'br_inst_retired.near_call' + then + echo "Register capture test [Skipped missing instruction]" + return + fi + if ! perf record --intr-regs=\? 2>&1 | egrep -q 'available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15' + then + echo "Register capture test [Skipped missing registers]" + return + fi + if ! perf record -o - --intr-regs=di,r8,dx,cx -e cpu/br_inst_retired.near_call/p \ + -c 1000 --per-thread true 2> /dev/null \ + | perf script -F ip,sym,iregs -i - 2> /dev/null \ + | egrep -q "DI:" + then + echo "Register capture test [Failed missing output]" + err=1 + return + fi + echo "Register capture test [Success]" +} + +# Test for platform support and return TEST_SKIP +[ $(uname -m) = s390x ] && exit 2 +test_per_thread +test_register_capture +exit $err diff --git a/tools/perf/util/bpf-loader.c b/tools/perf/util/bpf-loader.c index b72cef1ae959..f8ad581ea247 100644 --- a/tools/perf/util/bpf-loader.c +++ b/tools/perf/util/bpf-loader.c @@ -99,16 +99,26 @@ static int bpf_perf_object__add(struct bpf_object *obj) return perf_obj ? 0 : -ENOMEM; } +static int libbpf_init(void) +{ + if (libbpf_initialized) + return 0; + + libbpf_set_print(libbpf_perf_print); + libbpf_initialized = true; + return 0; +} + struct bpf_object * bpf__prepare_load_buffer(void *obj_buf, size_t obj_buf_sz, const char *name) { LIBBPF_OPTS(bpf_object_open_opts, opts, .object_name = name); struct bpf_object *obj; + int err; - if (!libbpf_initialized) { - libbpf_set_print(libbpf_perf_print); - libbpf_initialized = true; - } + err = libbpf_init(); + if (err) + return ERR_PTR(err); obj = bpf_object__open_mem(obj_buf, obj_buf_sz, &opts); if (IS_ERR_OR_NULL(obj)) { @@ -135,14 +145,13 @@ struct bpf_object *bpf__prepare_load(const char *filename, bool source) { LIBBPF_OPTS(bpf_object_open_opts, opts, .object_name = filename); struct bpf_object *obj; + int err; - if (!libbpf_initialized) { - libbpf_set_print(libbpf_perf_print); - libbpf_initialized = true; - } + err = libbpf_init(); + if (err) + return ERR_PTR(err); if (source) { - int err; void *obj_buf; size_t obj_buf_sz; diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index 2a1729e7aee4..d38722560e80 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -597,6 +597,17 @@ static int evsel__sw_name(struct evsel *evsel, char *bf, size_t size) return r + evsel__add_modifiers(evsel, bf + r, size - r); } +const char *evsel__tool_names[PERF_TOOL_MAX] = { + "duration_time", + "user_time", + "system_time", +}; + +static int evsel__tool_name(enum perf_tool_event ev, char *bf, size_t size) +{ + return scnprintf(bf, size, "%s", evsel__tool_names[ev]); +} + static int __evsel__bp_name(char *bf, size_t size, u64 addr, u64 type) { int r; @@ -723,12 +734,6 @@ static int evsel__raw_name(struct evsel *evsel, char *bf, size_t size) return ret + evsel__add_modifiers(evsel, bf + ret, size - ret); } -static int evsel__tool_name(char *bf, size_t size) -{ - int ret = scnprintf(bf, size, "duration_time"); - return ret; -} - const char *evsel__name(struct evsel *evsel) { char bf[128]; @@ -754,7 +759,7 @@ const char *evsel__name(struct evsel *evsel) case PERF_TYPE_SOFTWARE: if (evsel->tool_event) - evsel__tool_name(bf, sizeof(bf)); + evsel__tool_name(evsel->tool_event, bf, sizeof(bf)); else evsel__sw_name(evsel, bf, sizeof(bf)); break; diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h index 041b42d33bf5..45d674812239 100644 --- a/tools/perf/util/evsel.h +++ b/tools/perf/util/evsel.h @@ -30,6 +30,10 @@ typedef int (evsel__sb_cb_t)(union perf_event *event, void *data); enum perf_tool_event { PERF_TOOL_NONE = 0, PERF_TOOL_DURATION_TIME = 1, + PERF_TOOL_USER_TIME = 2, + PERF_TOOL_SYSTEM_TIME = 3, + + PERF_TOOL_MAX, }; /** struct evsel - event selector @@ -258,6 +262,7 @@ extern const char *evsel__hw_cache_op[PERF_COUNT_HW_CACHE_OP_MAX][EVSEL__MAX_ALI extern const char *evsel__hw_cache_result[PERF_COUNT_HW_CACHE_RESULT_MAX][EVSEL__MAX_ALIASES]; extern const char *evsel__hw_names[PERF_COUNT_HW_MAX]; extern const char *evsel__sw_names[PERF_COUNT_SW_MAX]; +extern const char *evsel__tool_names[PERF_TOOL_MAX]; extern char *evsel__bpf_counter_events; bool evsel__match_bpf_counter_events(const char *name); diff --git a/tools/perf/util/genelf.h b/tools/perf/util/genelf.h index 3db3293213a9..ae138afe6c56 100644 --- a/tools/perf/util/genelf.h +++ b/tools/perf/util/genelf.h @@ -38,6 +38,9 @@ int jit_add_debug_info(Elf *e, uint64_t code_addr, void *debug, int nr_debug_ent #elif defined(__s390x__) #define GEN_ELF_ARCH EM_S390 #define GEN_ELF_CLASS ELFCLASS64 +#elif defined(__riscv) && __riscv_xlen == 64 +#define GEN_ELF_ARCH EM_RISCV +#define GEN_ELF_CLASS ELFCLASS64 #else #error "unsupported architecture" #endif diff --git a/tools/perf/util/mem-events.c b/tools/perf/util/mem-events.c index ed0ab838bcc5..efaf263464b9 100644 --- a/tools/perf/util/mem-events.c +++ b/tools/perf/util/mem-events.c @@ -314,6 +314,30 @@ static const char * const mem_hops[] = { "board", }; +static int perf_mem__op_scnprintf(char *out, size_t sz, struct mem_info *mem_info) +{ + u64 op = PERF_MEM_LOCK_NA; + int l; + + if (mem_info) + op = mem_info->data_src.mem_op; + + if (op & PERF_MEM_OP_NA) + l = scnprintf(out, sz, "N/A"); + else if (op & PERF_MEM_OP_LOAD) + l = scnprintf(out, sz, "LOAD"); + else if (op & PERF_MEM_OP_STORE) + l = scnprintf(out, sz, "STORE"); + else if (op & PERF_MEM_OP_PFETCH) + l = scnprintf(out, sz, "PFETCH"); + else if (op & PERF_MEM_OP_EXEC) + l = scnprintf(out, sz, "EXEC"); + else + l = scnprintf(out, sz, "No"); + + return l; +} + int perf_mem__lvl_scnprintf(char *out, size_t sz, struct mem_info *mem_info) { size_t i, l = 0; @@ -466,7 +490,10 @@ int perf_script__meminfo_scnprintf(char *out, size_t sz, struct mem_info *mem_in { int i = 0; - i += perf_mem__lvl_scnprintf(out, sz, mem_info); + i += scnprintf(out, sz, "|OP "); + i += perf_mem__op_scnprintf(out + i, sz - i, mem_info); + i += scnprintf(out + i, sz - i, "|LVL "); + i += perf_mem__lvl_scnprintf(out + i, sz, mem_info); i += scnprintf(out + i, sz - i, "|SNP "); i += perf_mem__snp_scnprintf(out + i, sz - i, mem_info); i += scnprintf(out + i, sz - i, "|TLB "); diff --git a/tools/perf/util/metricgroup.c b/tools/perf/util/metricgroup.c index d8492e339521..126a43a8917e 100644 --- a/tools/perf/util/metricgroup.c +++ b/tools/perf/util/metricgroup.c @@ -141,6 +141,11 @@ struct metric { * output. */ const char *metric_unit; + /** + * The name of the CPU such as "cpu_core" or "cpu_atom" in hybrid systems + * and "NULL" in non-hybrid systems. + */ + const char *pmu_name; /** Optional null terminated array of referenced metrics. */ struct metric_ref *metric_refs; /** @@ -215,6 +220,7 @@ static struct metric *metric__new(const struct pmu_event *pe, } m->metric_expr = pe->metric_expr; m->metric_unit = pe->unit; + m->pmu_name = pe->pmu; m->pctx->runtime = runtime; m->has_constraint = metric_no_group || metricgroup__has_constraint(pe); m->metric_refs = NULL; @@ -250,10 +256,12 @@ static bool contains_metric_id(struct evsel **metric_events, int num_events, * @ids: the metric IDs to match. * @metric_evlist: the list of perf events. * @out_metric_events: holds the created metric events array. + * @pmu_name: the name of the CPU. */ static int setup_metric_events(struct hashmap *ids, struct evlist *metric_evlist, - struct evsel ***out_metric_events) + struct evsel ***out_metric_events, + const char *pmu_name) { struct evsel **metric_events; const char *metric_id; @@ -286,6 +294,10 @@ static int setup_metric_events(struct hashmap *ids, * about this event. */ if (hashmap__find(ids, metric_id, (void **)&val_ptr)) { + if (evsel__is_hybrid(ev) && pmu_name && + strcmp(pmu_name, ev->pmu_name)) { + continue; + } metric_events[matched_events++] = ev; if (matched_events >= ids_size) @@ -724,7 +736,8 @@ static int decode_all_metric_ids(struct evlist *perf_evlist, const char *modifie static int metricgroup__build_event_string(struct strbuf *events, const struct expr_parse_ctx *ctx, const char *modifier, - bool has_constraint) + bool has_constraint, + const char *pmu_name) { struct hashmap_entry *cur; size_t bkt; @@ -806,12 +819,18 @@ static int metricgroup__build_event_string(struct strbuf *events, if (no_group) { /* Strange case of a metric of just duration_time. */ ret = strbuf_addf(events, "duration_time"); - } else if (!has_constraint) - ret = strbuf_addf(events, "}:W,duration_time"); - else + } else if (!has_constraint) { + ret = strbuf_addf(events, "}:W"); + if (pmu_name) + ret = strbuf_addf(events, "#%s", pmu_name); ret = strbuf_addf(events, ",duration_time"); - } else if (!no_group && !has_constraint) + } else + ret = strbuf_addf(events, ",duration_time"); + } else if (!no_group && !has_constraint) { ret = strbuf_addf(events, "}:W"); + if (pmu_name) + ret = strbuf_addf(events, "#%s", pmu_name); + } return ret; #undef RETURN_IF_NON_ZERO @@ -1150,11 +1169,13 @@ static int metric_list_cmp(void *priv __maybe_unused, const struct list_head *l, * @metric_list: The list that the metric or metric group are added to. * @map: The map that is searched for metrics, most commonly the table for the * architecture perf is running upon. + * @pmu_name: the name of the CPU. */ -static int metricgroup__add_metric(const char *metric_name, const char *modifier, - bool metric_no_group, +static int metricgroup__add_metric(const char *metric_name, + const char *modifier, bool metric_no_group, struct list_head *metric_list, - const struct pmu_events_map *map) + const struct pmu_events_map *map, + const char *pmu_name) { const struct pmu_event *pe; LIST_HEAD(list); @@ -1167,6 +1188,8 @@ static int metricgroup__add_metric(const char *metric_name, const char *modifier */ map_for_each_metric(pe, i, map, metric_name) { has_match = true; + if (pmu_name && pe->pmu && strcmp(pmu_name, pe->pmu)) + continue; ret = add_metric(&list, pe, modifier, metric_no_group, /*root_metric=*/NULL, /*visited_metrics=*/NULL, map); @@ -1215,10 +1238,12 @@ out: * @metric_list: The list that metrics are added to. * @map: The map that is searched for metrics, most commonly the table for the * architecture perf is running upon. + * @pmu_name: the name of the CPU. */ static int metricgroup__add_metric_list(const char *list, bool metric_no_group, struct list_head *metric_list, - const struct pmu_events_map *map) + const struct pmu_events_map *map, + const char *pmu_name) { char *list_itr, *list_copy, *metric_name, *modifier; int ret, count = 0; @@ -1235,7 +1260,7 @@ static int metricgroup__add_metric_list(const char *list, bool metric_no_group, ret = metricgroup__add_metric(metric_name, modifier, metric_no_group, metric_list, - map); + map, pmu_name); if (ret == -EINVAL) pr_err("Cannot find metric or group `%s'\n", metric_name); @@ -1310,6 +1335,183 @@ err_out: return ret; } +static char *get_metric_pmus(char *orig_str, struct strbuf *metric_pmus) +{ + char *llist, *nlist, *p1, *p2, *new_str = NULL; + int ret; + struct strbuf new_events; + + if (!strchr(orig_str, '#')) { + /* + * pmu name is added after '#'. If no '#' found, + * don't need to process pmu. + */ + return strdup(orig_str); + } + + nlist = strdup(orig_str); + if (!nlist) + return new_str; + + ret = strbuf_init(&new_events, 100); + if (ret) + goto err_out; + + ret = strbuf_grow(metric_pmus, 100); + if (ret) + goto err_out; + + llist = nlist; + while ((p1 = strsep(&llist, ",")) != NULL) { + p2 = strchr(p1, '#'); + if (p2) { + *p2 = 0; + ret = strbuf_addf(&new_events, "%s,", p1); + if (ret) + goto err_out; + + ret = strbuf_addf(metric_pmus, "%s,", p2 + 1); + if (ret) + goto err_out; + + } else { + ret = strbuf_addf(&new_events, "%s,", p1); + if (ret) + goto err_out; + } + } + + new_str = strdup(new_events.buf); + if (new_str) { + /* Remove last ',' */ + new_str[strlen(new_str) - 1] = 0; + } +err_out: + free(nlist); + strbuf_release(&new_events); + return new_str; +} + +static void set_pmu_unmatched_events(struct evlist *evlist, int group_idx, + char *pmu_name, + unsigned long *evlist_removed) +{ + struct evsel *evsel, *pos; + int i = 0, j = 0; + + /* + * Move to the first evsel of a given group + */ + evlist__for_each_entry(evlist, evsel) { + if (evsel__is_group_leader(evsel) && + evsel->core.nr_members >= 1) { + if (i < group_idx) { + j += evsel->core.nr_members; + i++; + continue; + } + } + } + + i = 0; + evlist__for_each_entry(evlist, evsel) { + if (i < j) { + i++; + continue; + } + + /* + * Now we are at the first evsel in the group + */ + for_each_group_evsel(pos, evsel) { + if (evsel__is_hybrid(pos) && + strcmp(pos->pmu_name, pmu_name)) { + set_bit(pos->core.idx, evlist_removed); + } + } + break; + } +} + +static void remove_pmu_umatched_events(struct evlist *evlist, char *metric_pmus) +{ + struct evsel *evsel, *tmp, *new_leader = NULL; + unsigned long *evlist_removed; + char *llist, *nlist, *p1; + bool need_new_leader = false; + int i = 0, new_nr_members = 0; + + nlist = strdup(metric_pmus); + if (!nlist) + return; + + evlist_removed = bitmap_zalloc(evlist->core.nr_entries); + if (!evlist_removed) { + free(nlist); + return; + } + + llist = nlist; + while ((p1 = strsep(&llist, ",")) != NULL) { + if (strlen(p1) > 0) { + /* + * p1 points to the string of pmu name, e.g. "cpu_atom". + * The metric group string has pmu suffixes, e.g. + * "{inst_retired.any,cpu_clk_unhalted.thread}:W#cpu_core, + * {cpu_clk_unhalted.core,inst_retired.any_p}:W#cpu_atom" + * By counting the pmu name, we can know the index of + * group. + */ + set_pmu_unmatched_events(evlist, i++, p1, + evlist_removed); + } + } + + evlist__for_each_entry_safe(evlist, tmp, evsel) { + if (test_bit(evsel->core.idx, evlist_removed)) { + if (!evsel__is_group_leader(evsel)) { + if (!need_new_leader) { + if (new_leader) + new_leader->core.leader->nr_members--; + else + evsel->core.leader->nr_members--; + } else + new_nr_members--; + } else { + /* + * If group leader is to remove, we need to + * prepare a new leader and adjust all group + * members. + */ + need_new_leader = true; + new_nr_members = + evsel->core.leader->nr_members - 1; + } + + evlist__remove(evlist, evsel); + evsel__delete(evsel); + } else { + if (!evsel__is_group_leader(evsel)) { + if (need_new_leader) { + need_new_leader = false; + new_leader = evsel; + new_leader->core.leader = + &new_leader->core; + new_leader->core.nr_members = + new_nr_members; + } else if (new_leader) + evsel->core.leader = &new_leader->core; + } else { + need_new_leader = false; + new_leader = NULL; + } + } + } + + bitmap_free(evlist_removed); + free(nlist); +} + /** * parse_ids - Build the event string for the ids and parse them creating an * evlist. The encoded metric_ids are decoded. @@ -1319,14 +1521,18 @@ err_out: * @modifier: any modifiers added to the events. * @has_constraint: false if events should be placed in a weak group. * @out_evlist: the created list of events. + * @pmu_name: the name of the CPU. */ static int parse_ids(bool metric_no_merge, struct perf_pmu *fake_pmu, struct expr_parse_ctx *ids, const char *modifier, - bool has_constraint, struct evlist **out_evlist) + bool has_constraint, struct evlist **out_evlist, + const char *pmu_name) { struct parse_events_error parse_error; struct evlist *parsed_evlist; struct strbuf events = STRBUF_INIT; + struct strbuf metric_pmus = STRBUF_INIT; + char *nlist = NULL; int ret; *out_evlist = NULL; @@ -1353,7 +1559,7 @@ static int parse_ids(bool metric_no_merge, struct perf_pmu *fake_pmu, ids__insert(ids->ids, tmp); } ret = metricgroup__build_event_string(&events, ids, modifier, - has_constraint); + has_constraint, pmu_name); if (ret) return ret; @@ -1364,11 +1570,20 @@ static int parse_ids(bool metric_no_merge, struct perf_pmu *fake_pmu, } pr_debug("Parsing metric events '%s'\n", events.buf); parse_events_error__init(&parse_error); - ret = __parse_events(parsed_evlist, events.buf, &parse_error, fake_pmu); + nlist = get_metric_pmus(events.buf, &metric_pmus); + if (!nlist) { + ret = -ENOMEM; + goto err_out; + } + ret = __parse_events(parsed_evlist, nlist, &parse_error, fake_pmu); if (ret) { parse_events_error__print(&parse_error, events.buf); goto err_out; } + + if (metric_pmus.alloc) + remove_pmu_umatched_events(parsed_evlist, metric_pmus.buf); + ret = decode_all_metric_ids(parsed_evlist, modifier); if (ret) goto err_out; @@ -1376,9 +1591,12 @@ static int parse_ids(bool metric_no_merge, struct perf_pmu *fake_pmu, *out_evlist = parsed_evlist; parsed_evlist = NULL; err_out: + if (nlist) + free(nlist); parse_events_error__exit(&parse_error); evlist__delete(parsed_evlist); strbuf_release(&events); + strbuf_release(&metric_pmus); return ret; } @@ -1397,7 +1615,8 @@ static int parse_groups(struct evlist *perf_evlist, const char *str, if (metric_events_list->nr_entries == 0) metricgroup__rblist_init(metric_events_list); ret = metricgroup__add_metric_list(str, metric_no_group, - &metric_list, map); + &metric_list, map, + perf_evlist->hybrid_pmu_name); if (ret) goto out; @@ -1413,7 +1632,8 @@ static int parse_groups(struct evlist *perf_evlist, const char *str, ret = parse_ids(metric_no_merge, fake_pmu, combined, /*modifier=*/NULL, /*has_constraint=*/true, - &combined_evlist); + &combined_evlist, + perf_evlist->hybrid_pmu_name); } if (combined) expr__ctx_free(combined); @@ -1450,6 +1670,9 @@ static int parse_groups(struct evlist *perf_evlist, const char *str, continue; if (expr__subset_of_ids(n->pctx, m->pctx)) { + if (m->pmu_name && n->pmu_name + && strcmp(m->pmu_name, n->pmu_name)) + continue; pr_debug("Events in '%s' fully contained within '%s'\n", m->metric_name, n->metric_name); metric_evlist = n->evlist; @@ -1459,14 +1682,16 @@ static int parse_groups(struct evlist *perf_evlist, const char *str, } } if (!metric_evlist) { - ret = parse_ids(metric_no_merge, fake_pmu, m->pctx, m->modifier, - m->has_constraint, &m->evlist); + ret = parse_ids(metric_no_merge, fake_pmu, m->pctx, + m->modifier, m->has_constraint, + &m->evlist, m->pmu_name); if (ret) goto out; metric_evlist = m->evlist; } - ret = setup_metric_events(m->pctx->ids, metric_evlist, &metric_events); + ret = setup_metric_events(m->pctx->ids, metric_evlist, + &metric_events, m->pmu_name); if (ret) { pr_debug("Cannot resolve IDs for %s: %s\n", m->metric_name, m->metric_expr); diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index dd84fed698a3..937f6c9434a2 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -154,6 +154,21 @@ struct event_symbol event_symbols_sw[PERF_COUNT_SW_MAX] = { }, }; +struct event_symbol event_symbols_tool[PERF_TOOL_MAX] = { + [PERF_TOOL_DURATION_TIME] = { + .symbol = "duration_time", + .alias = "", + }, + [PERF_TOOL_USER_TIME] = { + .symbol = "user_time", + .alias = "", + }, + [PERF_TOOL_SYSTEM_TIME] = { + .symbol = "system_time", + .alias = "", + }, +}; + #define __PERF_EVENT_FIELD(config, name) \ ((config & PERF_EVENT_##name##_MASK) >> PERF_EVENT_##name##_SHIFT) @@ -402,7 +417,9 @@ static int add_event_tool(struct list_head *list, int *idx, if (!evsel) return -ENOMEM; evsel->tool_event = tool_event; - if (tool_event == PERF_TOOL_DURATION_TIME) { + if (tool_event == PERF_TOOL_DURATION_TIME + || tool_event == PERF_TOOL_USER_TIME + || tool_event == PERF_TOOL_SYSTEM_TIME) { free((char *)evsel->unit); evsel->unit = strdup("ns"); } @@ -3056,21 +3073,34 @@ out_enomem: return evt_num; } -static void print_tool_event(const char *name, const char *event_glob, +static void print_tool_event(const struct event_symbol *syms, const char *event_glob, bool name_only) { - if (event_glob && !strglobmatch(name, event_glob)) + if (syms->symbol == NULL) + return; + + if (event_glob && !(strglobmatch(syms->symbol, event_glob) || + (syms->alias && strglobmatch(syms->alias, event_glob)))) return; + if (name_only) - printf("%s ", name); - else + printf("%s ", syms->symbol); + else { + char name[MAX_NAME_LEN]; + if (syms->alias && strlen(syms->alias)) + snprintf(name, MAX_NAME_LEN, "%s OR %s", syms->symbol, syms->alias); + else + strlcpy(name, syms->symbol, MAX_NAME_LEN); printf(" %-50s [%s]\n", name, "Tool event"); - + } } void print_tool_events(const char *event_glob, bool name_only) { - print_tool_event("duration_time", event_glob, name_only); + // Start at 1 because the first enum entry symbols no tool event + for (int i = 1; i < PERF_TOOL_MAX; ++i) { + print_tool_event(event_symbols_tool + i, event_glob, name_only); + } if (pager_in_use()) printf("\n"); } diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l index 5b6e4b5249cf..3a9ce96c8bce 100644 --- a/tools/perf/util/parse-events.l +++ b/tools/perf/util/parse-events.l @@ -353,6 +353,8 @@ alignment-faults { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_AL emulation-faults { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_EMULATION_FAULTS); } dummy { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_DUMMY); } duration_time { return tool(yyscanner, PERF_TOOL_DURATION_TIME); } +user_time { return tool(yyscanner, PERF_TOOL_USER_TIME); } +system_time { return tool(yyscanner, PERF_TOOL_SYSTEM_TIME); } bpf-output { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_BPF_OUTPUT); } cgroup-switches { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_CGROUP_SWITCHES); } diff --git a/tools/perf/util/path.c b/tools/perf/util/path.c index caed0336429f..ce80b79be103 100644 --- a/tools/perf/util/path.c +++ b/tools/perf/util/path.c @@ -86,9 +86,21 @@ bool is_directory(const char *base_path, const struct dirent *dent) char path[PATH_MAX]; struct stat st; - sprintf(path, "%s/%s", base_path, dent->d_name); + snprintf(path, sizeof(path), "%s/%s", base_path, dent->d_name); if (stat(path, &st)) return false; return S_ISDIR(st.st_mode); } + +bool is_executable_file(const char *base_path, const struct dirent *dent) +{ + char path[PATH_MAX]; + struct stat st; + + snprintf(path, sizeof(path), "%s/%s", base_path, dent->d_name); + if (stat(path, &st)) + return false; + + return !S_ISDIR(st.st_mode) && (st.st_mode & S_IXUSR); +} diff --git a/tools/perf/util/path.h b/tools/perf/util/path.h index 083429b7efa3..d94902c22222 100644 --- a/tools/perf/util/path.h +++ b/tools/perf/util/path.h @@ -12,5 +12,6 @@ int path__join3(char *bf, size_t size, const char *path1, const char *path2, con bool is_regular_file(const char *file); bool is_directory(const char *base_path, const struct dirent *dent); +bool is_executable_file(const char *base_path, const struct dirent *dent); #endif /* _PERF_PATH_H */ diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c index 413f2d19c13f..659eb4e4b34b 100644 --- a/tools/perf/util/scripting-engines/trace-event-python.c +++ b/tools/perf/util/scripting-engines/trace-event-python.c @@ -392,6 +392,18 @@ static const char *get_dsoname(struct map *map) return dsoname; } +static unsigned long get_offset(struct symbol *sym, struct addr_location *al) +{ + unsigned long offset; + + if (al->addr < sym->end) + offset = al->addr - sym->start; + else + offset = al->addr - al->map->start - sym->start; + + return offset; +} + static PyObject *python_process_callchain(struct perf_sample *sample, struct evsel *evsel, struct addr_location *al) @@ -443,6 +455,25 @@ static PyObject *python_process_callchain(struct perf_sample *sample, _PyUnicode_FromStringAndSize(node->ms.sym->name, node->ms.sym->namelen)); pydict_set_item_string_decref(pyelem, "sym", pysym); + + if (node->ms.map) { + struct map *map = node->ms.map; + struct addr_location node_al; + unsigned long offset; + + node_al.addr = map->map_ip(map, node->ip); + node_al.map = map; + offset = get_offset(node->ms.sym, &node_al); + + pydict_set_item_string_decref( + pyelem, "sym_off", + PyLong_FromUnsignedLongLong(offset)); + } + if (node->srcline && strcmp(":0", node->srcline)) { + pydict_set_item_string_decref( + pyelem, "sym_srcline", + _PyUnicode_FromString(node->srcline)); + } } if (node->ms.map) { @@ -520,18 +551,6 @@ exit: return pylist; } -static unsigned long get_offset(struct symbol *sym, struct addr_location *al) -{ - unsigned long offset; - - if (al->addr < sym->end) - offset = al->addr - sym->start; - else - offset = al->addr - al->map->start - sym->start; - - return offset; -} - static int get_symoff(struct symbol *sym, struct addr_location *al, bool print_off, char *bf, int size) { @@ -2074,7 +2093,11 @@ static int python_generate_script(struct tep_handle *pevent, const char *outfile fprintf(ofp, "\t\tfor node in common_callchain:"); fprintf(ofp, "\n\t\t\tif 'sym' in node:"); - fprintf(ofp, "\n\t\t\t\tprint(\"\\t[%%x] %%s\" %% (node['ip'], node['sym']['name']))"); + fprintf(ofp, "\n\t\t\t\tprint(\"\t[%%x] %%s%%s%%s%%s\" %% ("); + fprintf(ofp, "\n\t\t\t\t\tnode['ip'], node['sym']['name'],"); + fprintf(ofp, "\n\t\t\t\t\t\"+0x{:x}\".format(node['sym_off']) if 'sym_off' in node else \"\","); + fprintf(ofp, "\n\t\t\t\t\t\" ({})\".format(node['dso']) if 'dso' in node else \"\","); + fprintf(ofp, "\n\t\t\t\t\t\" \" + node['sym_srcline'] if 'sym_srcline' in node else \"\"))"); fprintf(ofp, "\n\t\t\telse:"); fprintf(ofp, "\n\t\t\t\tprint(\"\t[%%x]\" %% (node['ip']))\n\n"); fprintf(ofp, "\t\tprint()\n\n"); diff --git a/tools/perf/util/stat-display.c b/tools/perf/util/stat-display.c index 138e3ab9d638..d9629a83aa78 100644 --- a/tools/perf/util/stat-display.c +++ b/tools/perf/util/stat-display.c @@ -539,7 +539,8 @@ static void aggr_update_shadow(struct perf_stat_config *config, } } -static void uniquify_event_name(struct evsel *counter) +static void uniquify_event_name(struct evsel *counter, + struct perf_stat_config *stat_config) { char *new_name; char *config; @@ -558,7 +559,8 @@ static void uniquify_event_name(struct evsel *counter) counter->name = new_name; } } else { - if (perf_pmu__has_hybrid()) { + if (perf_pmu__has_hybrid() && + stat_config->metric_events.nr_entries == 0) { ret = asprintf(&new_name, "%s/%s/", counter->pmu_name, counter->name); } else { @@ -610,6 +612,19 @@ static bool hybrid_uniquify(struct evsel *evsel) return perf_pmu__has_hybrid() && !is_uncore(evsel); } +static bool hybrid_merge(struct evsel *counter, struct perf_stat_config *config, + bool check) +{ + if (hybrid_uniquify(counter)) { + if (check) + return config && config->hybrid_merge; + else + return config && !config->hybrid_merge; + } + + return false; +} + static bool collect_data(struct perf_stat_config *config, struct evsel *counter, void (*cb)(struct perf_stat_config *config, struct evsel *counter, void *data, bool first), @@ -618,9 +633,9 @@ static bool collect_data(struct perf_stat_config *config, struct evsel *counter, if (counter->merged_stat) return false; cb(config, counter, data, true); - if (config->no_merge || hybrid_uniquify(counter)) - uniquify_event_name(counter); - else if (counter->auto_merge_stats) + if (config->no_merge || hybrid_merge(counter, config, false)) + uniquify_event_name(counter, config); + else if (counter->auto_merge_stats || hybrid_merge(counter, config, true)) collect_all_aliases(config, counter, cb, data); return true; } diff --git a/tools/perf/util/stat-shadow.c b/tools/perf/util/stat-shadow.c index 10af7804e482..ea4c35e4f1da 100644 --- a/tools/perf/util/stat-shadow.c +++ b/tools/perf/util/stat-shadow.c @@ -26,6 +26,7 @@ struct runtime_stat rt_stat; struct stats walltime_nsecs_stats; +struct rusage_stats ru_stats; struct saved_value { struct rb_node rb_node; @@ -199,6 +200,7 @@ void perf_stat__reset_shadow_stats(void) { reset_stat(&rt_stat); memset(&walltime_nsecs_stats, 0, sizeof(walltime_nsecs_stats)); + memset(&ru_stats, 0, sizeof(ru_stats)); } void perf_stat__reset_shadow_per_stat(struct runtime_stat *st) diff --git a/tools/perf/util/stat.c b/tools/perf/util/stat.c index 817a2de264b4..4a5f3b8ff820 100644 --- a/tools/perf/util/stat.c +++ b/tools/perf/util/stat.c @@ -117,7 +117,9 @@ static void perf_stat_evsel_id_init(struct evsel *evsel) /* ps->id is 0 hence PERF_STAT_EVSEL_ID__NONE by default */ for (i = 0; i < PERF_STAT_EVSEL_ID__MAX; i++) { - if (!strcmp(evsel__name(evsel), id_str[i])) { + if (!strcmp(evsel__name(evsel), id_str[i]) || + (strstr(evsel__name(evsel), id_str[i]) && evsel->pmu_name + && strstr(evsel__name(evsel), evsel->pmu_name))) { ps->id = i; break; } diff --git a/tools/perf/util/stat.h b/tools/perf/util/stat.h index 335d19cc3063..b5aeb8e6d34b 100644 --- a/tools/perf/util/stat.h +++ b/tools/perf/util/stat.h @@ -108,6 +108,11 @@ struct runtime_stat { struct rblist value_list; }; +struct rusage_stats { + struct stats ru_utime_usec_stat; + struct stats ru_stime_usec_stat; +}; + typedef struct aggr_cpu_id (*aggr_get_id_t)(struct perf_stat_config *config, struct perf_cpu cpu); struct perf_stat_config { @@ -122,6 +127,7 @@ struct perf_stat_config { bool ru_display; bool big_num; bool no_merge; + bool hybrid_merge; bool walltime_run_table; bool all_kernel; bool all_user; @@ -148,6 +154,7 @@ struct perf_stat_config { const char *csv_sep; struct stats *walltime_nsecs_stats; struct rusage ru_data; + struct rusage_stats *ru_stats; struct cpu_aggr_map *aggr_map; aggr_get_id_t aggr_get_id; struct cpu_aggr_map *cpus_aggr_map; @@ -177,6 +184,20 @@ static inline void init_stats(struct stats *stats) stats->max = 0; } +static inline void init_rusage_stats(struct rusage_stats *ru_stats) { + init_stats(&ru_stats->ru_utime_usec_stat); + init_stats(&ru_stats->ru_stime_usec_stat); +} + +static inline void update_rusage_stats(struct rusage_stats *ru_stats, struct rusage* rusage) { + const u64 us_to_ns = 1000; + const u64 s_to_ns = 1000000000; + update_stats(&ru_stats->ru_utime_usec_stat, + (rusage->ru_utime.tv_usec * us_to_ns + rusage->ru_utime.tv_sec * s_to_ns)); + update_stats(&ru_stats->ru_stime_usec_stat, + (rusage->ru_stime.tv_usec * us_to_ns + rusage->ru_stime.tv_sec * s_to_ns)); +} + struct evsel; struct evlist; @@ -196,6 +217,7 @@ bool __perf_stat_evsel__is(struct evsel *evsel, enum perf_stat_evsel_id id); extern struct runtime_stat rt_stat; extern struct stats walltime_nsecs_stats; +extern struct rusage_stats ru_stats; typedef void (*print_metric_t)(struct perf_stat_config *config, void *ctx, const char *color, const char *unit, diff --git a/tools/perf/util/topdown.c b/tools/perf/util/topdown.c index 1081b20f9891..a369f84ceb6a 100644 --- a/tools/perf/util/topdown.c +++ b/tools/perf/util/topdown.c @@ -1,18 +1,24 @@ // SPDX-License-Identifier: GPL-2.0 #include <stdio.h> #include "pmu.h" +#include "pmu-hybrid.h" #include "topdown.h" -int topdown_filter_events(const char **attr, char **str, bool use_group) +int topdown_filter_events(const char **attr, char **str, bool use_group, + const char *pmu_name) { int off = 0; int i; int len = 0; char *s; + bool is_hybrid = perf_pmu__is_hybrid(pmu_name); for (i = 0; attr[i]; i++) { - if (pmu_have_event("cpu", attr[i])) { - len += strlen(attr[i]) + 1; + if (pmu_have_event(pmu_name, attr[i])) { + if (is_hybrid) + len += strlen(attr[i]) + strlen(pmu_name) + 3; + else + len += strlen(attr[i]) + 1; attr[i - off] = attr[i]; } else off++; @@ -30,7 +36,10 @@ int topdown_filter_events(const char **attr, char **str, bool use_group) if (use_group) *s++ = '{'; for (i = 0; attr[i]; i++) { - strcpy(s, attr[i]); + if (!is_hybrid) + strcpy(s, attr[i]); + else + sprintf(s, "%s/%s/", pmu_name, attr[i]); s += strlen(s); *s++ = ','; } diff --git a/tools/perf/util/topdown.h b/tools/perf/util/topdown.h index 2f0d0b887639..118e75281f93 100644 --- a/tools/perf/util/topdown.h +++ b/tools/perf/util/topdown.h @@ -7,6 +7,7 @@ bool arch_topdown_check_group(bool *warn); void arch_topdown_group_warn(void); bool arch_topdown_sample_read(struct evsel *leader); -int topdown_filter_events(const char **attr, char **str, bool use_group); +int topdown_filter_events(const char **attr, char **str, bool use_group, + const char *pmu_name); #endif diff --git a/tools/perf/util/util.c b/tools/perf/util/util.c index f8571a66d063..eeb83c80f458 100644 --- a/tools/perf/util/util.c +++ b/tools/perf/util/util.c @@ -430,6 +430,11 @@ void perf_debuginfod_setup(struct perf_debuginfod *di) setenv("DEBUGINFOD_URLS", di->urls, 1); pr_debug("DEBUGINFOD_URLS=%s\n", getenv("DEBUGINFOD_URLS")); + +#ifndef HAVE_DEBUGINFOD_SUPPORT + if (di->set) + pr_warning("WARNING: debuginfod support requested, but perf is not built with it\n"); +#endif } /* |