diff options
Diffstat (limited to 'sound/soc/codecs/rt5677-spi.c')
| -rw-r--r-- | sound/soc/codecs/rt5677-spi.c | 43 |
1 files changed, 24 insertions, 19 deletions
diff --git a/sound/soc/codecs/rt5677-spi.c b/sound/soc/codecs/rt5677-spi.c index 84501c2020c7..84b6bd8b50e1 100644 --- a/sound/soc/codecs/rt5677-spi.c +++ b/sound/soc/codecs/rt5677-spi.c @@ -25,6 +25,7 @@ #include <linux/sysfs.h> #include <linux/clk.h> #include <linux/firmware.h> +#include <linux/acpi.h> #include "rt5677-spi.h" @@ -57,13 +58,15 @@ static DEFINE_MUTEX(spi_mutex); * RT5677_SPI_READ/WRITE_32: Transfer 4 bytes * RT5677_SPI_READ/WRITE_BURST: Transfer any multiples of 8 bytes * - * For example, reading 260 bytes at 0x60030002 uses the following commands: - * 0x60030002 RT5677_SPI_READ_16 2 bytes + * Note: + * 16 Bit writes and reads are restricted to the address range + * 0x18020000 ~ 0x18021000 + * + * For example, reading 256 bytes at 0x60030004 uses the following commands: * 0x60030004 RT5677_SPI_READ_32 4 bytes * 0x60030008 RT5677_SPI_READ_BURST 240 bytes * 0x600300F8 RT5677_SPI_READ_BURST 8 bytes * 0x60030100 RT5677_SPI_READ_32 4 bytes - * 0x60030104 RT5677_SPI_READ_16 2 bytes * * Input: * @read: true for read commands; false for write commands @@ -78,15 +81,13 @@ static u8 rt5677_spi_select_cmd(bool read, u32 align, u32 remain, u32 *len) { u8 cmd; - if (align == 2 || align == 6 || remain == 2) { - cmd = RT5677_SPI_READ_16; - *len = 2; - } else if (align == 4 || remain <= 6) { + if (align == 4 || remain <= 4) { cmd = RT5677_SPI_READ_32; *len = 4; } else { cmd = RT5677_SPI_READ_BURST; - *len = min_t(u32, remain & ~7, RT5677_SPI_BURST_LEN); + *len = (((remain - 1) >> 3) + 1) << 3; + *len = min_t(u32, *len, RT5677_SPI_BURST_LEN); } return read ? cmd : cmd + 1; } @@ -107,7 +108,7 @@ static void rt5677_spi_reverse(u8 *dst, u32 dstlen, const u8 *src, u32 srclen) } } -/* Read DSP address space using SPI. addr and len have to be 2-byte aligned. */ +/* Read DSP address space using SPI. addr and len have to be 4-byte aligned. */ int rt5677_spi_read(u32 addr, void *rxbuf, size_t len) { u32 offset; @@ -123,7 +124,7 @@ int rt5677_spi_read(u32 addr, void *rxbuf, size_t len) if (!g_spi) return -ENODEV; - if ((addr & 1) || (len & 1)) { + if ((addr & 3) || (len & 3)) { dev_err(&g_spi->dev, "Bad read align 0x%x(%zu)\n", addr, len); return -EACCES; } @@ -158,13 +159,13 @@ int rt5677_spi_read(u32 addr, void *rxbuf, size_t len) } EXPORT_SYMBOL_GPL(rt5677_spi_read); -/* Write DSP address space using SPI. addr has to be 2-byte aligned. - * If len is not 2-byte aligned, an extra byte of zero is written at the end +/* Write DSP address space using SPI. addr has to be 4-byte aligned. + * If len is not 4-byte aligned, then extra zeros are written at the end * as padding. */ int rt5677_spi_write(u32 addr, const void *txbuf, size_t len) { - u32 offset, len_with_pad = len; + u32 offset; int status = 0; struct spi_transfer t; struct spi_message m; @@ -177,22 +178,19 @@ int rt5677_spi_write(u32 addr, const void *txbuf, size_t len) if (!g_spi) return -ENODEV; - if (addr & 1) { + if (addr & 3) { dev_err(&g_spi->dev, "Bad write align 0x%x(%zu)\n", addr, len); return -EACCES; } - if (len & 1) - len_with_pad = len + 1; - memset(&t, 0, sizeof(t)); t.tx_buf = buf; t.speed_hz = RT5677_SPI_FREQ; spi_message_init_with_transfers(&m, &t, 1); - for (offset = 0; offset < len_with_pad;) { + for (offset = 0; offset < len;) { spi_cmd = rt5677_spi_select_cmd(false, (addr + offset) & 7, - len_with_pad - offset, &t.len); + len - offset, &t.len); /* Construct SPI message header */ buf[0] = spi_cmd; @@ -226,9 +224,16 @@ static int rt5677_spi_probe(struct spi_device *spi) return 0; } +static const struct acpi_device_id rt5677_spi_acpi_id[] = { + { "RT5677AA", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, rt5677_spi_acpi_id); + static struct spi_driver rt5677_spi_driver = { .driver = { .name = "rt5677", + .acpi_match_table = ACPI_PTR(rt5677_spi_acpi_id), }, .probe = rt5677_spi_probe, }; |