diff options
Diffstat (limited to 'net/mac80211/rc80211_pid_algo.c')
-rw-r--r-- | net/mac80211/rc80211_pid_algo.c | 191 |
1 files changed, 69 insertions, 122 deletions
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c index a914ba73ccf5..86eb374e3b87 100644 --- a/net/mac80211/rc80211_pid_algo.c +++ b/net/mac80211/rc80211_pid_algo.c @@ -68,17 +68,14 @@ * exhibited a worse failed frames behaviour and we'll choose the highest rate * whose failed frames behaviour is not worse than the one of the original rate * target. While at it, check that the new rate is valid. */ -static void rate_control_pid_adjust_rate(struct ieee80211_local *local, - struct sta_info *sta, int adj, +static void rate_control_pid_adjust_rate(struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, + struct rc_pid_sta_info *spinfo, int adj, struct rc_pid_rateinfo *rinfo) { - struct ieee80211_sub_if_data *sdata; - struct ieee80211_supported_band *sband; int cur_sorted, new_sorted, probe, tmp, n_bitrates, band; - int cur = sta->txrate_idx; + int cur = spinfo->txrate_idx; - sdata = sta->sdata; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; band = sband->band; n_bitrates = sband->n_bitrates; @@ -111,7 +108,7 @@ static void rate_control_pid_adjust_rate(struct ieee80211_local *local, /* Fit the rate found to the nearest supported rate. */ do { if (rate_supported(sta, band, rinfo[tmp].index)) { - sta->txrate_idx = rinfo[tmp].index; + spinfo->txrate_idx = rinfo[tmp].index; break; } if (adj < 0) @@ -121,9 +118,9 @@ static void rate_control_pid_adjust_rate(struct ieee80211_local *local, } while (tmp < n_bitrates && tmp >= 0); #ifdef CONFIG_MAC80211_DEBUGFS - rate_control_pid_event_rate_change( - &((struct rc_pid_sta_info *)sta->rate_ctrl_priv)->events, - sta->txrate_idx, sband->bitrates[sta->txrate_idx].bitrate); + rate_control_pid_event_rate_change(&spinfo->events, + spinfo->txrate_idx, + sband->bitrates[spinfo->txrate_idx].bitrate); #endif } @@ -145,15 +142,11 @@ static void rate_control_pid_normalize(struct rc_pid_info *pinfo, int l) } static void rate_control_pid_sample(struct rc_pid_info *pinfo, - struct ieee80211_local *local, - struct sta_info *sta) + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, + struct rc_pid_sta_info *spinfo) { -#ifdef CONFIG_MAC80211_MESH - struct ieee80211_sub_if_data *sdata = sta->sdata; -#endif - struct rc_pid_sta_info *spinfo = sta->rate_ctrl_priv; struct rc_pid_rateinfo *rinfo = pinfo->rinfo; - struct ieee80211_supported_band *sband; u32 pf; s32 err_avg; u32 err_prop; @@ -162,9 +155,6 @@ static void rate_control_pid_sample(struct rc_pid_info *pinfo, int adj, i, j, tmp; unsigned long period; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - spinfo = sta->rate_ctrl_priv; - /* In case nothing happened during the previous control interval, turn * the sharpening factor on. */ period = (HZ * pinfo->sampling_period + 500) / 1000; @@ -180,14 +170,15 @@ static void rate_control_pid_sample(struct rc_pid_info *pinfo, if (unlikely(spinfo->tx_num_xmit == 0)) pf = spinfo->last_pf; else { + /* XXX: BAD HACK!!! */ + struct sta_info *si = container_of(sta, struct sta_info, sta); + pf = spinfo->tx_num_failed * 100 / spinfo->tx_num_xmit; -#ifdef CONFIG_MAC80211_MESH - if (pf == 100 && - sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) - mesh_plink_broken(sta); -#endif + + if (ieee80211_vif_is_mesh(&si->sdata->vif) && pf == 100) + mesh_plink_broken(si); pf <<= RC_PID_ARITH_SHIFT; - sta->fail_avg = ((pf + (spinfo->last_pf << 3)) / 9) + si->fail_avg = ((pf + (spinfo->last_pf << 3)) / 9) >> RC_PID_ARITH_SHIFT; } @@ -195,16 +186,16 @@ static void rate_control_pid_sample(struct rc_pid_info *pinfo, spinfo->tx_num_failed = 0; /* If we just switched rate, update the rate behaviour info. */ - if (pinfo->oldrate != sta->txrate_idx) { + if (pinfo->oldrate != spinfo->txrate_idx) { i = rinfo[pinfo->oldrate].rev_index; - j = rinfo[sta->txrate_idx].rev_index; + j = rinfo[spinfo->txrate_idx].rev_index; tmp = (pf - spinfo->last_pf); tmp = RC_PID_DO_ARITH_RIGHT_SHIFT(tmp, RC_PID_ARITH_SHIFT); rinfo[j].diff = rinfo[i].diff + tmp; - pinfo->oldrate = sta->txrate_idx; + pinfo->oldrate = spinfo->txrate_idx; } rate_control_pid_normalize(pinfo, sband->n_bitrates); @@ -233,43 +224,26 @@ static void rate_control_pid_sample(struct rc_pid_info *pinfo, /* Change rate. */ if (adj) - rate_control_pid_adjust_rate(local, sta, adj, rinfo); + rate_control_pid_adjust_rate(sband, sta, spinfo, adj, rinfo); } -static void rate_control_pid_tx_status(void *priv, struct net_device *dev, +static void rate_control_pid_tx_status(void *priv, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - struct ieee80211_sub_if_data *sdata; struct rc_pid_info *pinfo = priv; - struct sta_info *sta; - struct rc_pid_sta_info *spinfo; + struct rc_pid_sta_info *spinfo = priv_sta; unsigned long period; - struct ieee80211_supported_band *sband; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - - if (!sta) - goto unlock; - - /* Don't update the state if we're not controlling the rate. */ - sdata = sta->sdata; - if (sdata->force_unicast_rateidx > -1) { - sta->txrate_idx = sdata->max_ratectrl_rateidx; - goto unlock; - } + if (!spinfo) + return; /* Ignore all frames that were sent with a different rate than the rate * we currently advise mac80211 to use. */ - if (info->tx_rate_idx != sta->txrate_idx) - goto unlock; + if (info->tx_rate_idx != spinfo->txrate_idx) + return; - spinfo = sta->rate_ctrl_priv; spinfo->tx_num_xmit++; #ifdef CONFIG_MAC80211_DEBUGFS @@ -287,93 +261,68 @@ static void rate_control_pid_tx_status(void *priv, struct net_device *dev, spinfo->tx_num_xmit++; } - if (info->status.excessive_retries) { - sta->tx_retry_failed++; - sta->tx_num_consecutive_failures++; - sta->tx_num_mpdu_fail++; - } else { - sta->tx_num_consecutive_failures = 0; - sta->tx_num_mpdu_ok++; - } - sta->tx_retry_count += info->status.retry_count; - sta->tx_num_mpdu_fail += info->status.retry_count; - /* Update PID controller state. */ period = (HZ * pinfo->sampling_period + 500) / 1000; if (!period) period = 1; if (time_after(jiffies, spinfo->last_sample + period)) - rate_control_pid_sample(pinfo, local, sta); - - unlock: - rcu_read_unlock(); + rate_control_pid_sample(pinfo, sband, sta, spinfo); } -static void rate_control_pid_get_rate(void *priv, struct net_device *dev, - struct ieee80211_supported_band *sband, - struct sk_buff *skb, - struct rate_selection *sel) +static void +rate_control_pid_get_rate(void *priv, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta, + struct sk_buff *skb, + struct rate_selection *sel) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - struct ieee80211_sub_if_data *sdata; - struct sta_info *sta; + struct rc_pid_sta_info *spinfo = priv_sta; int rateidx; u16 fc; - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - /* Send management frames and broadcast/multicast data using lowest * rate. */ fc = le16_to_cpu(hdr->frame_control); - if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || - is_multicast_ether_addr(hdr->addr1) || !sta) { - sel->rate_idx = rate_lowest_index(local, sband, sta); - rcu_read_unlock(); + if (!sta || !spinfo || + (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || + is_multicast_ether_addr(hdr->addr1)) { + sel->rate_idx = rate_lowest_index(sband, sta); return; } - /* If a forced rate is in effect, select it. */ - sdata = IEEE80211_DEV_TO_SUB_IF(dev); - if (sdata->force_unicast_rateidx > -1) - sta->txrate_idx = sdata->force_unicast_rateidx; - - rateidx = sta->txrate_idx; + rateidx = spinfo->txrate_idx; if (rateidx >= sband->n_bitrates) rateidx = sband->n_bitrates - 1; - sta->last_txrate_idx = rateidx; - - rcu_read_unlock(); - sel->rate_idx = rateidx; #ifdef CONFIG_MAC80211_DEBUGFS - rate_control_pid_event_tx_rate( - &((struct rc_pid_sta_info *) sta->rate_ctrl_priv)->events, + rate_control_pid_event_tx_rate(&spinfo->events, rateidx, sband->bitrates[rateidx].bitrate); #endif } -static void rate_control_pid_rate_init(void *priv, void *priv_sta, - struct ieee80211_local *local, - struct sta_info *sta) +static void +rate_control_pid_rate_init(void *priv, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta) { + struct rc_pid_sta_info *spinfo = priv_sta; + struct sta_info *si; + /* TODO: This routine should consider using RSSI from previous packets * as we need to have IEEE 802.1X auth succeed immediately after assoc.. * Until that method is implemented, we will use the lowest supported * rate as a workaround. */ - struct ieee80211_supported_band *sband; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - sta->txrate_idx = rate_lowest_index(local, sband, sta); - sta->fail_avg = 0; + spinfo->txrate_idx = rate_lowest_index(sband, sta); + /* HACK */ + si = container_of(sta, struct sta_info, sta); + si->fail_avg = 0; } -static void *rate_control_pid_alloc(struct ieee80211_local *local) +static void *rate_control_pid_alloc(struct ieee80211_hw *hw, + struct dentry *debugfsdir) { struct rc_pid_info *pinfo; struct rc_pid_rateinfo *rinfo; @@ -384,7 +333,7 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local) struct rc_pid_debugfs_entries *de; #endif - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + sband = hw->wiphy->bands[hw->conf.channel->band]; pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC); if (!pinfo) @@ -439,30 +388,28 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local) #ifdef CONFIG_MAC80211_DEBUGFS de = &pinfo->dentries; - de->dir = debugfs_create_dir("rc80211_pid", - local->hw.wiphy->debugfsdir); de->target = debugfs_create_u32("target_pf", S_IRUSR | S_IWUSR, - de->dir, &pinfo->target); + debugfsdir, &pinfo->target); de->sampling_period = debugfs_create_u32("sampling_period", - S_IRUSR | S_IWUSR, de->dir, + S_IRUSR | S_IWUSR, debugfsdir, &pinfo->sampling_period); de->coeff_p = debugfs_create_u32("coeff_p", S_IRUSR | S_IWUSR, - de->dir, &pinfo->coeff_p); + debugfsdir, &pinfo->coeff_p); de->coeff_i = debugfs_create_u32("coeff_i", S_IRUSR | S_IWUSR, - de->dir, &pinfo->coeff_i); + debugfsdir, &pinfo->coeff_i); de->coeff_d = debugfs_create_u32("coeff_d", S_IRUSR | S_IWUSR, - de->dir, &pinfo->coeff_d); + debugfsdir, &pinfo->coeff_d); de->smoothing_shift = debugfs_create_u32("smoothing_shift", - S_IRUSR | S_IWUSR, de->dir, + S_IRUSR | S_IWUSR, debugfsdir, &pinfo->smoothing_shift); de->sharpen_factor = debugfs_create_u32("sharpen_factor", - S_IRUSR | S_IWUSR, de->dir, + S_IRUSR | S_IWUSR, debugfsdir, &pinfo->sharpen_factor); de->sharpen_duration = debugfs_create_u32("sharpen_duration", - S_IRUSR | S_IWUSR, de->dir, + S_IRUSR | S_IWUSR, debugfsdir, &pinfo->sharpen_duration); de->norm_offset = debugfs_create_u32("norm_offset", - S_IRUSR | S_IWUSR, de->dir, + S_IRUSR | S_IWUSR, debugfsdir, &pinfo->norm_offset); #endif @@ -484,7 +431,6 @@ static void rate_control_pid_free(void *priv) debugfs_remove(de->coeff_p); debugfs_remove(de->sampling_period); debugfs_remove(de->target); - debugfs_remove(de->dir); #endif kfree(pinfo->rinfo); @@ -495,7 +441,8 @@ static void rate_control_pid_clear(void *priv) { } -static void *rate_control_pid_alloc_sta(void *priv, gfp_t gfp) +static void *rate_control_pid_alloc_sta(void *priv, struct ieee80211_sta *sta, + gfp_t gfp) { struct rc_pid_sta_info *spinfo; @@ -513,10 +460,10 @@ static void *rate_control_pid_alloc_sta(void *priv, gfp_t gfp) return spinfo; } -static void rate_control_pid_free_sta(void *priv, void *priv_sta) +static void rate_control_pid_free_sta(void *priv, struct ieee80211_sta *sta, + void *priv_sta) { - struct rc_pid_sta_info *spinfo = priv_sta; - kfree(spinfo); + kfree(priv_sta); } static struct rate_control_ops mac80211_rcpid = { |