diff options
Diffstat (limited to 'kernel/power')
| -rw-r--r-- | kernel/power/Kconfig | 14 | ||||
| -rw-r--r-- | kernel/power/disk.c | 55 | ||||
| -rw-r--r-- | kernel/power/main.c | 5 | ||||
| -rw-r--r-- | kernel/power/pm.c | 3 | ||||
| -rw-r--r-- | kernel/power/process.c | 29 | ||||
| -rw-r--r-- | kernel/power/swsusp.c | 202 |
6 files changed, 240 insertions, 68 deletions
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index b99f61b82685..396c7873e804 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -29,7 +29,7 @@ config PM_DEBUG config SOFTWARE_SUSPEND bool "Software Suspend" - depends on EXPERIMENTAL && PM && SWAP && ((X86 && SMP) || ((FVR || PPC32 || X86) && !SMP)) + depends on PM && SWAP && (X86 || ((FVR || PPC32) && !SMP)) ---help--- Enable the possibility of suspending the machine. It doesn't need APM. @@ -73,6 +73,18 @@ config PM_STD_PARTITION suspended image to. It will simply pick the first available swap device. +config SWSUSP_ENCRYPT + bool "Encrypt suspend image" + depends on SOFTWARE_SUSPEND && CRYPTO=y && (CRYPTO_AES=y || CRYPTO_AES_586=y || CRYPTO_AES_X86_64=y) + default "" + ---help--- + To prevent data gathering from swap after resume you can encrypt + the suspend image with a temporary key that is deleted on + resume. + + Note that the temporary key is stored unencrypted on disk while the + system is suspended. + config SUSPEND_SMP bool depends on HOTPLUG_CPU && X86 && PM diff --git a/kernel/power/disk.c b/kernel/power/disk.c index 664eb0469b6e..2d8bf054d036 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -112,24 +112,12 @@ static inline void platform_finish(void) } } -static void finish(void) -{ - device_resume(); - platform_finish(); - thaw_processes(); - enable_nonboot_cpus(); - pm_restore_console(); -} - - static int prepare_processes(void) { int error; pm_prepare_console(); - sys_sync(); - disable_nonboot_cpus(); if (freeze_processes()) { @@ -162,15 +150,6 @@ static void unprepare_processes(void) pm_restore_console(); } -static int prepare_devices(void) -{ - int error; - - if ((error = device_suspend(PMSG_FREEZE))) - printk("Some devices failed to suspend\n"); - return error; -} - /** * pm_suspend_disk - The granpappy of power management. * @@ -187,17 +166,14 @@ int pm_suspend_disk(void) error = prepare_processes(); if (error) return error; - error = prepare_devices(); + error = device_suspend(PMSG_FREEZE); if (error) { + printk("Some devices failed to suspend\n"); unprepare_processes(); return error; } - pr_debug("PM: Attempting to suspend to disk.\n"); - if (pm_disk_mode == PM_DISK_FIRMWARE) - return pm_ops->enter(PM_SUSPEND_DISK); - pr_debug("PM: snapshotting memory.\n"); in_suspend = 1; if ((error = swsusp_suspend())) @@ -208,11 +184,20 @@ int pm_suspend_disk(void) error = swsusp_write(); if (!error) power_down(pm_disk_mode); + else { + /* swsusp_write can not fail in device_resume, + no need to do second device_resume */ + swsusp_free(); + unprepare_processes(); + return error; + } } else pr_debug("PM: Image restored successfully.\n"); + swsusp_free(); Done: - finish(); + device_resume(); + unprepare_processes(); return error; } @@ -233,9 +218,12 @@ static int software_resume(void) { int error; + down(&pm_sem); if (!swsusp_resume_device) { - if (!strlen(resume_file)) + if (!strlen(resume_file)) { + up(&pm_sem); return -ENOENT; + } swsusp_resume_device = name_to_dev_t(resume_file); pr_debug("swsusp: Resume From Partition %s\n", resume_file); } else { @@ -248,6 +236,7 @@ static int software_resume(void) * FIXME: If noresume is specified, we need to find the partition * and reset it back to normal swap space. */ + up(&pm_sem); return 0; } @@ -270,20 +259,24 @@ static int software_resume(void) pr_debug("PM: Preparing devices for restore.\n"); - if ((error = prepare_devices())) + if ((error = device_suspend(PMSG_FREEZE))) { + printk("Some devices failed to suspend\n"); goto Free; + } mb(); pr_debug("PM: Restoring saved image.\n"); swsusp_resume(); pr_debug("PM: Restore failed, recovering.n"); - finish(); + device_resume(); Free: swsusp_free(); Cleanup: unprepare_processes(); Done: + /* For success case, the suspend path will release the lock */ + up(&pm_sem); pr_debug("PM: Resume from disk failed.\n"); return 0; } @@ -390,7 +383,9 @@ static ssize_t resume_store(struct subsystem * subsys, const char * buf, size_t if (sscanf(buf, "%u:%u", &maj, &min) == 2) { res = MKDEV(maj,min); if (maj == MAJOR(res) && min == MINOR(res)) { + down(&pm_sem); swsusp_resume_device = res; + up(&pm_sem); printk("Attempting manual resume\n"); noresume = 0; software_resume(); diff --git a/kernel/power/main.c b/kernel/power/main.c index 71aa0fd22007..22bdc93cc038 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -143,11 +143,12 @@ static void suspend_finish(suspend_state_t state) -static char * pm_states[] = { +static char *pm_states[PM_SUSPEND_MAX] = { [PM_SUSPEND_STANDBY] = "standby", [PM_SUSPEND_MEM] = "mem", +#ifdef CONFIG_SOFTWARE_SUSPEND [PM_SUSPEND_DISK] = "disk", - NULL, +#endif }; diff --git a/kernel/power/pm.c b/kernel/power/pm.c index 61deda04e39e..159149321b3c 100644 --- a/kernel/power/pm.c +++ b/kernel/power/pm.c @@ -60,9 +60,8 @@ struct pm_dev *pm_register(pm_dev_t type, unsigned long id, pm_callback callback) { - struct pm_dev *dev = kmalloc(sizeof(struct pm_dev), GFP_KERNEL); + struct pm_dev *dev = kzalloc(sizeof(struct pm_dev), GFP_KERNEL); if (dev) { - memset(dev, 0, sizeof(*dev)); dev->type = type; dev->id = id; dev->callback = callback; diff --git a/kernel/power/process.c b/kernel/power/process.c index 3bd0d261818f..28de118f7a0b 100644 --- a/kernel/power/process.c +++ b/kernel/power/process.c @@ -38,7 +38,6 @@ void refrigerator(void) processes around? */ long save; save = current->state; - current->state = TASK_UNINTERRUPTIBLE; pr_debug("%s entered refrigerator\n", current->comm); printk("="); @@ -47,8 +46,10 @@ void refrigerator(void) recalc_sigpending(); /* We sent fake signal, clean it up */ spin_unlock_irq(¤t->sighand->siglock); - while (frozen(current)) + while (frozen(current)) { + current->state = TASK_UNINTERRUPTIBLE; schedule(); + } pr_debug("%s left refrigerator\n", current->comm); current->state = save; } @@ -80,13 +81,33 @@ int freeze_processes(void) } while_each_thread(g, p); read_unlock(&tasklist_lock); yield(); /* Yield is okay here */ - if (time_after(jiffies, start_time + TIMEOUT)) { + if (todo && time_after(jiffies, start_time + TIMEOUT)) { printk( "\n" ); printk(KERN_ERR " stopping tasks failed (%d tasks remaining)\n", todo ); - return todo; + break; } } while(todo); + /* This does not unfreeze processes that are already frozen + * (we have slightly ugly calling convention in that respect, + * and caller must call thaw_processes() if something fails), + * but it cleans up leftover PF_FREEZE requests. + */ + if (todo) { + read_lock(&tasklist_lock); + do_each_thread(g, p) + if (freezing(p)) { + pr_debug(" clean up: %s\n", p->comm); + p->flags &= ~PF_FREEZE; + spin_lock_irqsave(&p->sighand->siglock, flags); + recalc_sigpending_tsk(p); + spin_unlock_irqrestore(&p->sighand->siglock, flags); + } + while_each_thread(g, p); + read_unlock(&tasklist_lock); + return todo; + } + printk( "|\n" ); BUG_ON(in_atomic()); return 0; diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c index f2bc71b9fe8b..d967e875ee82 100644 --- a/kernel/power/swsusp.c +++ b/kernel/power/swsusp.c @@ -31,6 +31,9 @@ * Alex Badea <vampire@go.ro>: * Fixed runaway init * + * Andreas Steinmetz <ast@domdv.de>: + * Added encrypted suspend option + * * More state savers are welcome. Especially for the scsi layer... * * For TODOs,FIXMEs also look in Documentation/power/swsusp.txt @@ -71,8 +74,16 @@ #include <asm/tlbflush.h> #include <asm/io.h> +#include <linux/random.h> +#include <linux/crypto.h> +#include <asm/scatterlist.h> + #include "power.h" +#define CIPHER "aes" +#define MAXKEY 32 +#define MAXIV 32 + /* References to section boundaries */ extern const void __nosave_begin, __nosave_end; @@ -103,7 +114,8 @@ static suspend_pagedir_t *pagedir_save; #define SWSUSP_SIG "S1SUSPEND" static struct swsusp_header { - char reserved[PAGE_SIZE - 20 - sizeof(swp_entry_t)]; + char reserved[PAGE_SIZE - 20 - MAXKEY - MAXIV - sizeof(swp_entry_t)]; + u8 key_iv[MAXKEY+MAXIV]; swp_entry_t swsusp_info; char orig_sig[10]; char sig[10]; @@ -129,6 +141,131 @@ static struct swsusp_info swsusp_info; static unsigned short swapfile_used[MAX_SWAPFILES]; static unsigned short root_swap; +static int write_page(unsigned long addr, swp_entry_t * loc); +static int bio_read_page(pgoff_t page_off, void * page); + +static u8 key_iv[MAXKEY+MAXIV]; + +#ifdef CONFIG_SWSUSP_ENCRYPT + +static int crypto_init(int mode, void **mem) +{ + int error = 0; + int len; + char *modemsg; + struct crypto_tfm *tfm; + + modemsg = mode ? "suspend not possible" : "resume not possible"; + + tfm = crypto_alloc_tfm(CIPHER, CRYPTO_TFM_MODE_CBC); + if(!tfm) { + printk(KERN_ERR "swsusp: no tfm, %s\n", modemsg); + error = -EINVAL; + goto out; + } + + if(MAXKEY < crypto_tfm_alg_min_keysize(tfm)) { + printk(KERN_ERR "swsusp: key buffer too small, %s\n", modemsg); + error = -ENOKEY; + goto fail; + } + + if (mode) + get_random_bytes(key_iv, MAXKEY+MAXIV); + + len = crypto_tfm_alg_max_keysize(tfm); + if (len > MAXKEY) + len = MAXKEY; + + if (crypto_cipher_setkey(tfm, key_iv, len)) { + printk(KERN_ERR "swsusp: key setup failure, %s\n", modemsg); + error = -EKEYREJECTED; + goto fail; + } + + len = crypto_tfm_alg_ivsize(tfm); + + if (MAXIV < len) { + printk(KERN_ERR "swsusp: iv buffer too small, %s\n", modemsg); + error = -EOVERFLOW; + goto fail; + } + + crypto_cipher_set_iv(tfm, key_iv+MAXKEY, len); + + *mem=(void *)tfm; + + goto out; + +fail: crypto_free_tfm(tfm); +out: return error; +} + +static __inline__ void crypto_exit(void *mem) +{ + crypto_free_tfm((struct crypto_tfm *)mem); +} + +static __inline__ int crypto_write(struct pbe *p, void *mem) +{ + int error = 0; + struct scatterlist src, dst; + + src.page = virt_to_page(p->address); + src.offset = 0; + src.length = PAGE_SIZE; + dst.page = virt_to_page((void *)&swsusp_header); + dst.offset = 0; + dst.length = PAGE_SIZE; + + error = crypto_cipher_encrypt((struct crypto_tfm *)mem, &dst, &src, + PAGE_SIZE); + + if (!error) + error = write_page((unsigned long)&swsusp_header, + &(p->swap_address)); + return error; +} + +static __inline__ int crypto_read(struct pbe *p, void *mem) +{ + int error = 0; + struct scatterlist src, dst; + + error = bio_read_page(swp_offset(p->swap_address), (void *)p->address); + if (!error) { + src.offset = 0; + src.length = PAGE_SIZE; + dst.offset = 0; + dst.length = PAGE_SIZE; + src.page = dst.page = virt_to_page((void *)p->address); + + error = crypto_cipher_decrypt((struct crypto_tfm *)mem, &dst, + &src, PAGE_SIZE); + } + return error; +} +#else +static __inline__ int crypto_init(int mode, void *mem) +{ + return 0; +} + +static __inline__ void crypto_exit(void *mem) +{ +} + +static __inline__ int crypto_write(struct pbe *p, void *mem) +{ + return write_page(p->address, &(p->swap_address)); +} + +static __inline__ int crypto_read(struct pbe *p, void *mem) +{ + return bio_read_page(swp_offset(p->swap_address), (void *)p->address); +} +#endif + static int mark_swapfiles(swp_entry_t prev) { int error; @@ -140,6 +277,7 @@ static int mark_swapfiles(swp_entry_t prev) !memcmp("SWAPSPACE2",swsusp_header.sig, 10)) { memcpy(swsusp_header.orig_sig,swsusp_header.sig, 10); memcpy(swsusp_header.sig,SWSUSP_SIG, 10); + memcpy(swsusp_header.key_iv, key_iv, MAXKEY+MAXIV); swsusp_header.swsusp_info = prev; error = rw_swap_page_sync(WRITE, swp_entry(root_swap, 0), @@ -179,9 +317,9 @@ static int swsusp_swap_check(void) /* This is called before saving image */ len=strlen(resume_file); root_swap = 0xFFFF; - swap_list_lock(); + spin_lock(&swap_lock); for (i=0; i<MAX_SWAPFILES; i++) { - if (swap_info[i].flags == 0) { + if (!(swap_info[i].flags & SWP_WRITEOK)) { swapfile_used[i]=SWAPFILE_UNUSED; } else { if (!len) { @@ -202,7 +340,7 @@ static int swsusp_swap_check(void) /* This is called before saving image */ } } } - swap_list_unlock(); + spin_unlock(&swap_lock); return (root_swap != 0xffff) ? 0 : -ENODEV; } @@ -216,12 +354,12 @@ static void lock_swapdevices(void) { int i; - swap_list_lock(); + spin_lock(&swap_lock); for (i = 0; i< MAX_SWAPFILES; i++) if (swapfile_used[i] == SWAPFILE_IGNORED) { - swap_info[i].flags ^= 0xFF; + swap_info[i].flags ^= SWP_WRITEOK; } - swap_list_unlock(); + spin_unlock(&swap_lock); } /** @@ -286,6 +424,10 @@ static int data_write(void) int error = 0, i = 0; unsigned int mod = nr_copy_pages / 100; struct pbe *p; + void *tfm; + + if ((error = crypto_init(1, &tfm))) + return error; if (!mod) mod = 1; @@ -294,11 +436,14 @@ static int data_write(void) for_each_pbe (p, pagedir_nosave) { if (!(i%mod)) printk( "\b\b\b\b%3d%%", i / mod ); - if ((error = write_page(p->address, &(p->swap_address)))) + if ((error = crypto_write(p, tfm))) { + crypto_exit(tfm); return error; + } i++; } printk("\b\b\b\bdone\n"); + crypto_exit(tfm); return error; } @@ -385,7 +530,6 @@ static int write_pagedir(void) * write_suspend_image - Write entire image and metadata. * */ - static int write_suspend_image(void) { int error; @@ -400,6 +544,7 @@ static int write_suspend_image(void) if ((error = close_swap())) goto FreePagedir; Done: + memset(key_iv, 0, MAXKEY+MAXIV); return error; FreePagedir: free_pagedir_entries(); @@ -591,18 +736,7 @@ static void copy_data_pages(void) static int calc_nr(int nr_copy) { - int extra = 0; - int mod = !!(nr_copy % PBES_PER_PAGE); - int diff = (nr_copy / PBES_PER_PAGE) + mod; - - do { - extra += diff; - nr_copy += diff; - mod = !!(nr_copy % PBES_PER_PAGE); - diff = (nr_copy / PBES_PER_PAGE) + mod - extra; - } while (diff > 0); - - return nr_copy; + return nr_copy + (nr_copy+PBES_PER_PAGE-2)/(PBES_PER_PAGE-1); } /** @@ -886,20 +1020,21 @@ int swsusp_suspend(void) * at resume time, and evil weirdness ensues. */ if ((error = device_power_down(PMSG_FREEZE))) { + printk(KERN_ERR "Some devices failed to power down, aborting suspend\n"); local_irq_enable(); return error; } if ((error = swsusp_swap_check())) { - printk(KERN_ERR "swsusp: FATAL: cannot find swap device, try " - "swapon -a!\n"); + printk(KERN_ERR "swsusp: cannot find swap device, try swapon -a.\n"); + device_power_up(); local_irq_enable(); return error; } save_processor_state(); if ((error = swsusp_arch_suspend())) - printk("Error %d suspending\n", error); + printk(KERN_ERR "Error %d suspending\n", error); /* Restore control flow magically appears here */ restore_processor_state(); BUG_ON (nr_copy_pages_check != nr_copy_pages); @@ -924,6 +1059,7 @@ int swsusp_resume(void) BUG_ON(!error); restore_processor_state(); restore_highmem(); + touch_softlockup_watchdog(); device_power_up(); local_irq_enable(); return error; @@ -1179,7 +1315,8 @@ static const char * sanity_check(void) if (strcmp(swsusp_info.uts.machine,system_utsname.machine)) return "machine"; #if 0 - if(swsusp_info.cpus != num_online_cpus()) + /* We can't use number of online CPUs when we use hotplug to remove them ;-))) */ + if (swsusp_info.cpus != num_possible_cpus()) return "number of cpus"; #endif return NULL; @@ -1212,13 +1349,14 @@ static int check_sig(void) return error; if (!memcmp(SWSUSP_SIG, swsusp_header.sig, 10)) { memcpy(swsusp_header.sig, swsusp_header.orig_sig, 10); + memcpy(key_iv, swsusp_header.key_iv, MAXKEY+MAXIV); + memset(swsusp_header.key_iv, 0, MAXKEY+MAXIV); /* * Reset swap signature now. */ error = bio_write_page(0, &swsusp_header); } else { - printk(KERN_ERR "swsusp: Suspend partition has wrong signature?\n"); return -EINVAL; } if (!error) @@ -1239,6 +1377,10 @@ static int data_read(struct pbe *pblist) int error = 0; int i = 0; int mod = swsusp_info.image_pages / 100; + void *tfm; + + if ((error = crypto_init(0, &tfm))) + return error; if (!mod) mod = 1; @@ -1250,14 +1392,15 @@ static int data_read(struct pbe *pblist) if (!(i % mod)) printk("\b\b\b\b%3d%%", i / mod); - error = bio_read_page(swp_offset(p->swap_address), - (void *)p->address); - if (error) + if ((error = crypto_read(p, tfm))) { + crypto_exit(tfm); return error; + } i++; } printk("\b\b\b\bdone\n"); + crypto_exit(tfm); return error; } @@ -1385,6 +1528,7 @@ int swsusp_read(void) error = read_suspend_image(); blkdev_put(resume_bdev); + memset(key_iv, 0, MAXKEY+MAXIV); if (!error) pr_debug("swsusp: Reading resume file was successful\n"); |