diff options
Diffstat (limited to 'init')
| -rw-r--r-- | init/Kconfig | 198 | ||||
| -rw-r--r-- | init/Makefile | 4 | ||||
| -rw-r--r-- | init/do_mounts.c | 2 | ||||
| -rw-r--r-- | init/init_task.c | 24 | ||||
| -rw-r--r-- | init/main.c | 40 |
5 files changed, 232 insertions, 36 deletions
diff --git a/init/Kconfig b/init/Kconfig index 038e2592664e..1e004d057468 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -27,6 +27,9 @@ config IRQ_WORK bool depends on HAVE_IRQ_WORK +config BUILDTIME_EXTABLE_SORT + bool + menu "General setup" config EXPERIMENTAL @@ -387,6 +390,7 @@ config AUDIT_LOGINUID_IMMUTABLE but may not be backwards compatible with older init systems. source "kernel/irq/Kconfig" +source "kernel/time/Kconfig" menu "RCU Subsystem" @@ -458,6 +462,33 @@ config RCU_FANOUT Select a specific number if testing RCU itself. Take the default if unsure. +config RCU_FANOUT_LEAF + int "Tree-based hierarchical RCU leaf-level fanout value" + range 2 RCU_FANOUT if 64BIT + range 2 RCU_FANOUT if !64BIT + depends on TREE_RCU || TREE_PREEMPT_RCU + default 16 + help + This option controls the leaf-level fanout of hierarchical + implementations of RCU, and allows trading off cache misses + against lock contention. Systems that synchronize their + scheduling-clock interrupts for energy-efficiency reasons will + want the default because the smaller leaf-level fanout keeps + lock contention levels acceptably low. Very large systems + (hundreds or thousands of CPUs) will instead want to set this + value to the maximum value possible in order to reduce the + number of cache misses incurred during RCU's grace-period + initialization. These systems tend to run CPU-bound, and thus + are not helped by synchronized interrupts, and thus tend to + skew them, which reduces lock contention enough that large + leaf-level fanouts work well. + + Select a specific number if testing RCU itself. + + Select the maximum permissible value for large systems. + + Take the default if unsure. + config RCU_FANOUT_EXACT bool "Disable tree-based hierarchical RCU auto-balancing" depends on TREE_RCU || TREE_PREEMPT_RCU @@ -515,10 +546,25 @@ config RCU_BOOST_PRIO depends on RCU_BOOST default 1 help - This option specifies the real-time priority to which preempted - RCU readers are to be boosted. If you are working with CPU-bound - real-time applications, you should specify a priority higher then - the highest-priority CPU-bound application. + This option specifies the real-time priority to which long-term + preempted RCU readers are to be boosted. If you are working + with a real-time application that has one or more CPU-bound + threads running at a real-time priority level, you should set + RCU_BOOST_PRIO to a priority higher then the highest-priority + real-time CPU-bound thread. The default RCU_BOOST_PRIO value + of 1 is appropriate in the common case, which is real-time + applications that do not have any CPU-bound threads. + + Some real-time applications might not have a single real-time + thread that saturates a given CPU, but instead might have + multiple real-time threads that, taken together, fully utilize + that CPU. In this case, you should set RCU_BOOST_PRIO to + a priority higher than the lowest-priority thread that is + conspiring to prevent the CPU from running any non-real-time + tasks. For example, if one thread at priority 10 and another + thread at priority 5 are between themselves fully consuming + the CPU time on a given CPU, then RCU_BOOST_PRIO should be + set to priority 6 or higher. Specify the real-time priority, or take the default if unsure. @@ -828,7 +874,10 @@ config IPC_NS config USER_NS bool "User namespace (EXPERIMENTAL)" depends on EXPERIMENTAL - default y + depends on UIDGID_CONVERTED + select UIDGID_STRICT_TYPE_CHECKS + + default n help This allows containers, i.e. vservers, to use user namespaces to provide different user info for different servers. @@ -852,6 +901,131 @@ config NET_NS endif # NAMESPACES +config UIDGID_CONVERTED + # True if all of the selected software conmponents are known + # to have uid_t and gid_t converted to kuid_t and kgid_t + # where appropriate and are otherwise safe to use with + # the user namespace. + bool + default y + + # List of kernel pieces that need user namespace work + # Features + depends on SYSVIPC = n + depends on IMA = n + depends on EVM = n + depends on KEYS = n + depends on AUDIT = n + depends on AUDITSYSCALL = n + depends on TASKSTATS = n + depends on TRACING = n + depends on FS_POSIX_ACL = n + depends on QUOTA = n + depends on QUOTACTL = n + depends on DEBUG_CREDENTIALS = n + depends on BSD_PROCESS_ACCT = n + depends on DRM = n + depends on PROC_EVENTS = n + + # Networking + depends on NET = n + depends on NET_9P = n + depends on IPX = n + depends on PHONET = n + depends on NET_CLS_FLOW = n + depends on NETFILTER_XT_MATCH_OWNER = n + depends on NETFILTER_XT_MATCH_RECENT = n + depends on NETFILTER_XT_TARGET_LOG = n + depends on NETFILTER_NETLINK_LOG = n + depends on INET = n + depends on IPV6 = n + depends on IP_SCTP = n + depends on AF_RXRPC = n + depends on LLC2 = n + depends on NET_KEY = n + depends on INET_DIAG = n + depends on DNS_RESOLVER = n + depends on AX25 = n + depends on ATALK = n + + # Filesystems + depends on USB_DEVICEFS = n + depends on USB_GADGETFS = n + depends on USB_FUNCTIONFS = n + depends on DEVTMPFS = n + depends on XENFS = n + + depends on 9P_FS = n + depends on ADFS_FS = n + depends on AFFS_FS = n + depends on AFS_FS = n + depends on AUTOFS4_FS = n + depends on BEFS_FS = n + depends on BFS_FS = n + depends on BTRFS_FS = n + depends on CEPH_FS = n + depends on CIFS = n + depends on CODA_FS = n + depends on CONFIGFS_FS = n + depends on CRAMFS = n + depends on DEBUG_FS = n + depends on ECRYPT_FS = n + depends on EFS_FS = n + depends on EXOFS_FS = n + depends on FAT_FS = n + depends on FUSE_FS = n + depends on GFS2_FS = n + depends on HFS_FS = n + depends on HFSPLUS_FS = n + depends on HPFS_FS = n + depends on HUGETLBFS = n + depends on ISO9660_FS = n + depends on JFFS2_FS = n + depends on JFS_FS = n + depends on LOGFS = n + depends on MINIX_FS = n + depends on NCP_FS = n + depends on NFSD = n + depends on NFS_FS = n + depends on NILFS2_FS = n + depends on NTFS_FS = n + depends on OCFS2_FS = n + depends on OMFS_FS = n + depends on QNX4FS_FS = n + depends on QNX6FS_FS = n + depends on REISERFS_FS = n + depends on SQUASHFS = n + depends on SYSV_FS = n + depends on UBIFS_FS = n + depends on UDF_FS = n + depends on UFS_FS = n + depends on VXFS_FS = n + depends on XFS_FS = n + + depends on !UML || HOSTFS = n + + # The rare drivers that won't build + depends on AIRO = n + depends on AIRO_CS = n + depends on TUN = n + depends on INFINIBAND_QIB = n + depends on BLK_DEV_LOOP = n + depends on ANDROID_BINDER_IPC = n + + # Security modules + depends on SECURITY_TOMOYO = n + depends on SECURITY_APPARMOR = n + +config UIDGID_STRICT_TYPE_CHECKS + bool "Require conversions between uid/gids and their internal representation" + depends on UIDGID_CONVERTED + default n + help + While the nececessary conversions are being added to all subsystems this option allows + the code to continue to build for unconverted subsystems. + + Say Y here if you want the strict type checking enabled + config SCHED_AUTOGROUP bool "Automatic process group scheduling" select EVENTFD @@ -1156,7 +1330,7 @@ menu "Kernel Performance Events And Counters" config PERF_EVENTS bool "Kernel performance events and counters" - default y if (PROFILING || PERF_COUNTERS) + default y if PROFILING depends on HAVE_PERF_EVENTS select ANON_INODES select IRQ_WORK @@ -1183,18 +1357,6 @@ config PERF_EVENTS Say Y if unsure. -config PERF_COUNTERS - bool "Kernel performance counters (old config option)" - depends on HAVE_PERF_EVENTS - help - This config has been obsoleted by the PERF_EVENTS - config option - please see that one for details. - - It has no effect on the kernel whether you enable - it or not, it is a compatibility placeholder. - - Say N if unsure. - config DEBUG_PERF_USE_VMALLOC default n bool "Debug: use vmalloc to back perf mmap() buffers" diff --git a/init/Makefile b/init/Makefile index 0bf677aa0872..7bc47ee31c36 100644 --- a/init/Makefile +++ b/init/Makefile @@ -10,6 +10,10 @@ obj-$(CONFIG_BLK_DEV_INITRD) += initramfs.o endif obj-$(CONFIG_GENERIC_CALIBRATE_DELAY) += calibrate.o +ifneq ($(CONFIG_ARCH_INIT_TASK),y) +obj-y += init_task.o +endif + mounts-y := do_mounts.o mounts-$(CONFIG_BLK_DEV_RAM) += do_mounts_rd.o mounts-$(CONFIG_BLK_DEV_INITRD) += do_mounts_initrd.o diff --git a/init/do_mounts.c b/init/do_mounts.c index 0e93f92a0345..42b0707c3481 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -472,7 +472,7 @@ void __init change_floppy(char *fmt, ...) void __init mount_root(void) { #ifdef CONFIG_ROOT_NFS - if (MAJOR(ROOT_DEV) == UNNAMED_MAJOR) { + if (ROOT_DEV == Root_NFS) { if (mount_nfs_root()) return; diff --git a/init/init_task.c b/init/init_task.c new file mode 100644 index 000000000000..8b2f3996b035 --- /dev/null +++ b/init/init_task.c @@ -0,0 +1,24 @@ +#include <linux/init_task.h> +#include <linux/export.h> +#include <linux/mqueue.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/mm.h> + +#include <asm/pgtable.h> +#include <asm/uaccess.h> + +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); + +/* Initial task structure */ +struct task_struct init_task = INIT_TASK(init_task); +EXPORT_SYMBOL(init_task); + +/* + * Initial thread structure. Alignment of this is handled by a special + * linker map entry. + */ +union thread_union init_thread_union __init_task_data = + { INIT_THREAD_INFO(init_task) }; diff --git a/init/main.c b/init/main.c index 44b2433334c7..1ca6b32c4828 100644 --- a/init/main.c +++ b/init/main.c @@ -226,7 +226,7 @@ static int __init loglevel(char *str) early_param("loglevel", loglevel); /* Change NUL term back to "=", to make "param" the whole string. */ -static int __init repair_env_string(char *param, char *val) +static int __init repair_env_string(char *param, char *val, const char *unused) { if (val) { /* param=val or param="val"? */ @@ -246,9 +246,9 @@ static int __init repair_env_string(char *param, char *val) * Unknown boot options get handed to init, unless they look like * unused parameters (modprobe will find them in /proc/cmdline). */ -static int __init unknown_bootoption(char *param, char *val) +static int __init unknown_bootoption(char *param, char *val, const char *unused) { - repair_env_string(param, val); + repair_env_string(param, val, unused); /* Handle obsolete-style parameters */ if (obsolete_checksetup(param)) @@ -385,7 +385,7 @@ static noinline void __init_refok rest_init(void) } /* Check for early params. */ -static int __init do_early_param(char *param, char *val) +static int __init do_early_param(char *param, char *val, const char *unused) { const struct obs_kernel_param *p; @@ -560,9 +560,6 @@ asmlinkage void __init start_kernel(void) early_boot_irqs_disabled = false; local_irq_enable(); - /* Interrupts are enabled now so all GFP allocations are safe. */ - gfp_allowed_mask = __GFP_BITS_MASK; - kmem_cache_init_late(); /* @@ -728,14 +725,14 @@ static initcall_t *initcall_levels[] __initdata = { }; static char *initcall_level_names[] __initdata = { - "early parameters", - "core parameters", - "postcore parameters", - "arch parameters", - "subsys parameters", - "fs parameters", - "device parameters", - "late parameters", + "early", + "core", + "postcore", + "arch", + "subsys", + "fs", + "device", + "late", }; static void __init do_initcall_level(int level) @@ -748,7 +745,7 @@ static void __init do_initcall_level(int level) static_command_line, __start___param, __stop___param - __start___param, level, level, - repair_env_string); + &repair_env_string); for (fn = initcall_levels[level]; fn < initcall_levels[level+1]; fn++) do_one_initcall(*fn); @@ -758,8 +755,13 @@ static void __init do_initcalls(void) { int level; - for (level = 0; level < ARRAY_SIZE(initcall_levels) - 1; level++) + for (level = 0; level < ARRAY_SIZE(initcall_levels) - 1; level++) { + pr_info("initlevel:%d=%s, %d registered initcalls\n", + level, initcall_level_names[level], + (int) (initcall_levels[level+1] + - initcall_levels[level])); do_initcall_level(level); + } } /* @@ -842,6 +844,10 @@ static int __init kernel_init(void * unused) * Wait until kthreadd is all set-up. */ wait_for_completion(&kthreadd_done); + + /* Now the scheduler is fully set up and can do blocking allocations */ + gfp_allowed_mask = __GFP_BITS_MASK; + /* * init can allocate pages on any node */ |