diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/spi/spi-mem.h | 2 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 65 |
2 files changed, 51 insertions, 16 deletions
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h index 6b0a7dc48a4b..f866d5c8ed32 100644 --- a/include/linux/spi/spi-mem.h +++ b/include/linux/spi/spi-mem.h @@ -233,6 +233,8 @@ static inline void *spi_mem_get_drvdata(struct spi_mem *mem) * limitations) * @supports_op: check if an operation is supported by the controller * @exec_op: execute a SPI memory operation + * not all driver provides supports_op(), so it can return -EOPNOTSUPP + * if the op is not supported by the driver/controller * @get_name: get a custom name for the SPI mem device from the controller. * This might be needed if the controller driver has been ported * to use the SPI mem layer and a custom name is used to keep diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 255a0562aea5..471fe2ff9066 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -20,6 +20,9 @@ #include <uapi/linux/spi/spi.h> +/* Max no. of CS supported per spi device */ +#define SPI_CS_CNT_MAX 4 + struct dma_chan; struct software_node; struct ptp_system_timestamp; @@ -132,7 +135,8 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg, * @max_speed_hz: Maximum clock rate to be used with this chip * (on this board); may be changed by the device's driver. * The spi_transfer.speed_hz can override this for each transfer. - * @chip_select: Chipselect, distinguishing chips handled by @controller. + * @chip_select: Array of physical chipselect, spi->chipselect[i] gives + * the corresponding physical CS for logical CS i. * @mode: The spi mode defines how data is clocked out and in. * This may be changed by the device's driver. * The "active low" default for chipselect mode can be overridden @@ -157,8 +161,8 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg, * the device will bind to the named driver and only the named driver. * Do not set directly, because core frees it; use driver_set_override() to * set or clear it. - * @cs_gpiod: GPIO descriptor of the chipselect line (optional, NULL when - * not using a GPIO line) + * @cs_gpiod: Array of GPIO descriptors of the corresponding chipselect lines + * (optional, NULL when not using a GPIO line) * @word_delay: delay to be inserted between consecutive * words of a transfer * @cs_setup: delay to be introduced by the controller after CS is asserted @@ -167,6 +171,7 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg, * deasserted. If @cs_change_delay is used from @spi_transfer, then the * two delays will be added up. * @pcpu_statistics: statistics for the spi_device + * @cs_index_mask: Bit mask of the active chipselect(s) in the chipselect array * * A @spi_device is used to interchange data between an SPI slave * (usually a discrete chip) and CPU memory. @@ -182,7 +187,7 @@ struct spi_device { struct spi_controller *controller; struct spi_controller *master; /* Compatibility layer */ u32 max_speed_hz; - u8 chip_select; + u8 chip_select[SPI_CS_CNT_MAX]; u8 bits_per_word; bool rt; #define SPI_NO_TX BIT(31) /* No transmit wire */ @@ -213,7 +218,7 @@ struct spi_device { void *controller_data; char modalias[SPI_NAME_SIZE]; const char *driver_override; - struct gpio_desc *cs_gpiod; /* Chip select GPIO descriptor */ + struct gpio_desc *cs_gpiod[SPI_CS_CNT_MAX]; /* Chip select gpio desc */ struct spi_delay word_delay; /* Inter-word delay */ /* CS delays */ struct spi_delay cs_setup; @@ -223,6 +228,13 @@ struct spi_device { /* The statistics */ struct spi_statistics __percpu *pcpu_statistics; + /* Bit mask of the chipselect(s) that the driver need to use from + * the chipselect array.When the controller is capable to handle + * multiple chip selects & memories are connected in parallel + * then more than one bit need to be set in cs_index_mask. + */ + u32 cs_index_mask : SPI_CS_CNT_MAX; + /* * Likely need more hooks for more protocol options affecting how * the controller talks to each chip, like: @@ -279,22 +291,33 @@ static inline void *spi_get_drvdata(const struct spi_device *spi) static inline u8 spi_get_chipselect(const struct spi_device *spi, u8 idx) { - return spi->chip_select; + return spi->chip_select[idx]; } static inline void spi_set_chipselect(struct spi_device *spi, u8 idx, u8 chipselect) { - spi->chip_select = chipselect; + spi->chip_select[idx] = chipselect; } static inline struct gpio_desc *spi_get_csgpiod(const struct spi_device *spi, u8 idx) { - return spi->cs_gpiod; + return spi->cs_gpiod[idx]; } static inline void spi_set_csgpiod(struct spi_device *spi, u8 idx, struct gpio_desc *csgpiod) { - spi->cs_gpiod = csgpiod; + spi->cs_gpiod[idx] = csgpiod; +} + +static inline bool spi_is_csgpiod(struct spi_device *spi) +{ + u8 idx; + + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { + if (spi_get_csgpiod(spi, idx)) + return true; + } + return false; } /** @@ -399,6 +422,8 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * @bus_lock_spinlock: spinlock for SPI bus locking * @bus_lock_mutex: mutex for exclusion of multiple callers * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use + * @multi_cs_cap: indicates that the SPI Controller can assert/de-assert + * more than one chip select at once. * @setup: updates the device mode and clocking records used by a * device's SPI controller; protocol code may call this. This * must fail if an unrecognized or unsupported mode is requested. @@ -461,10 +486,13 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * - return 1 if the transfer is still in progress. When * the driver is finished with this transfer it must * call spi_finalize_current_transfer() so the subsystem - * can issue the next transfer. Note: transfer_one and - * transfer_one_message are mutually exclusive; when both - * are set, the generic subsystem does not call your - * transfer_one callback. + * can issue the next transfer. If the transfer fails, the + * driver must set the flag SPI_TRANS_FAIL_IO to + * spi_transfer->error first, before calling + * spi_finalize_current_transfer(). + * Note: transfer_one and transfer_one_message are mutually + * exclusive; when both are set, the generic subsystem does + * not call your transfer_one callback. * @handle_err: the subsystem calls the driver to handle an error that occurs * in the generic implementation of transfer_one_message(). * @mem_ops: optimized/dedicated operations for interactions with SPI memory. @@ -567,6 +595,11 @@ struct spi_controller { #define SPI_CONTROLLER_MUST_TX BIT(4) /* Requires tx */ #define SPI_CONTROLLER_GPIO_SS BIT(5) /* GPIO CS must select slave */ #define SPI_CONTROLLER_SUSPENDED BIT(6) /* Currently suspended */ + /* + * The spi-controller has multi chip select capability and can + * assert/de-assert more than one chip select at once. + */ +#define SPI_CONTROLLER_MULTI_CS BIT(7) /* Flag indicating if the allocation of this struct is devres-managed */ bool devm_allocated; @@ -677,7 +710,8 @@ struct spi_controller { bool rt; bool auto_runtime_pm; bool cur_msg_mapped; - char last_cs; + char last_cs[SPI_CS_CNT_MAX]; + char last_cs_index_mask; bool last_cs_mode_high; bool fallback; struct completion xfer_completion; @@ -1040,6 +1074,7 @@ struct spi_transfer { unsigned len; #define SPI_TRANS_FAIL_NO_START BIT(0) +#define SPI_TRANS_FAIL_IO BIT(1) u16 error; dma_addr_t tx_dma; @@ -1638,8 +1673,6 @@ spi_transfer_is_last(struct spi_controller *ctlr, struct spi_transfer *xfer) /* Compatibility layer */ #define spi_master spi_controller -#define SPI_MASTER_HALF_DUPLEX SPI_CONTROLLER_HALF_DUPLEX - #define spi_master_get_devdata(_ctlr) spi_controller_get_devdata(_ctlr) #define spi_master_set_devdata(_ctlr, _data) \ spi_controller_set_devdata(_ctlr, _data) |