diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/clk/samsung.h | 56 | ||||
| -rw-r--r-- | include/linux/platform_data/clk-s3c2410.h | 19 | ||||
| -rw-r--r-- | include/linux/platform_data/fb-s3c2410.h | 99 | ||||
| -rw-r--r-- | include/linux/platform_data/mmc-s3cmci.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/s3c-hsudc.h | 2 | ||||
| -rw-r--r-- | include/linux/soc/samsung/s3c-adc.h | 32 | ||||
| -rw-r--r-- | include/linux/soc/samsung/s3c-cpu-freq.h | 145 | ||||
| -rw-r--r-- | include/linux/soc/samsung/s3c-cpufreq-core.h | 299 | ||||
| -rw-r--r-- | include/linux/soc/samsung/s3c-pm.h | 94 | ||||
| -rw-r--r-- | include/linux/spi/s3c24xx-fiq.h | 33 | ||||
| -rw-r--r-- | include/linux/spi/s3c24xx.h | 2 | ||||
| -rw-r--r-- | include/media/drv-intf/s3c_camif.h | 4 |
12 files changed, 782 insertions, 5 deletions
diff --git a/include/linux/clk/samsung.h b/include/linux/clk/samsung.h new file mode 100644 index 000000000000..79097e365f7f --- /dev/null +++ b/include/linux/clk/samsung.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#ifndef __LINUX_CLK_SAMSUNG_H_ +#define __LINUX_CLK_SAMSUNG_H_ + +#include <linux/compiler_types.h> + +struct device_node; + +#ifdef CONFIG_ARCH_S3C64XX +void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, + unsigned long xusbxti_f, bool s3c6400, + void __iomem *base); +#else +static inline void s3c64xx_clk_init(struct device_node *np, + unsigned long xtal_f, + unsigned long xusbxti_f, + bool s3c6400, void __iomem *base) { } +#endif /* CONFIG_ARCH_S3C64XX */ + +#ifdef CONFIG_S3C2410_COMMON_CLK +void s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#else +static inline void s3c2410_common_clk_init(struct device_node *np, + unsigned long xti_f, + int current_soc, + void __iomem *reg_base) { } +#endif /* CONFIG_S3C2410_COMMON_CLK */ + +#ifdef CONFIG_S3C2412_COMMON_CLK +void s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, + unsigned long ext_f, void __iomem *reg_base); +#else +static inline void s3c2412_common_clk_init(struct device_node *np, + unsigned long xti_f, + unsigned long ext_f, + void __iomem *reg_base) { } +#endif /* CONFIG_S3C2412_COMMON_CLK */ + +#ifdef CONFIG_S3C2443_COMMON_CLK +void s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#else +static inline void s3c2443_common_clk_init(struct device_node *np, + unsigned long xti_f, + int current_soc, + void __iomem *reg_base) { } +#endif /* CONFIG_S3C2443_COMMON_CLK */ + +#endif /* __LINUX_CLK_SAMSUNG_H_ */ diff --git a/include/linux/platform_data/clk-s3c2410.h b/include/linux/platform_data/clk-s3c2410.h new file mode 100644 index 000000000000..7eb1cfa5409b --- /dev/null +++ b/include/linux/platform_data/clk-s3c2410.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#ifndef __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ +#define __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ + +/** + * struct s3c2410_clk_platform_data - platform data for S3C2410 clock driver + * + * @modify_misccr: Function to modify the MISCCR and return the new value + */ +struct s3c2410_clk_platform_data { + unsigned int (*modify_misccr)(unsigned int clr, unsigned int chg); +}; + +#endif /* __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ */ + diff --git a/include/linux/platform_data/fb-s3c2410.h b/include/linux/platform_data/fb-s3c2410.h new file mode 100644 index 000000000000..10c11e6316d6 --- /dev/null +++ b/include/linux/platform_data/fb-s3c2410.h @@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org> + * + * Inspired by pxafb.h +*/ + +#ifndef __ASM_PLAT_FB_S3C2410_H +#define __ASM_PLAT_FB_S3C2410_H __FILE__ + +#include <linux/compiler_types.h> + +struct s3c2410fb_hw { + unsigned long lcdcon1; + unsigned long lcdcon2; + unsigned long lcdcon3; + unsigned long lcdcon4; + unsigned long lcdcon5; +}; + +/* LCD description */ +struct s3c2410fb_display { + /* LCD type */ + unsigned type; +#define S3C2410_LCDCON1_DSCAN4 (0<<5) +#define S3C2410_LCDCON1_STN4 (1<<5) +#define S3C2410_LCDCON1_STN8 (2<<5) +#define S3C2410_LCDCON1_TFT (3<<5) + +#define S3C2410_LCDCON1_TFT1BPP (8<<1) +#define S3C2410_LCDCON1_TFT2BPP (9<<1) +#define S3C2410_LCDCON1_TFT4BPP (10<<1) +#define S3C2410_LCDCON1_TFT8BPP (11<<1) +#define S3C2410_LCDCON1_TFT16BPP (12<<1) +#define S3C2410_LCDCON1_TFT24BPP (13<<1) + + /* Screen size */ + unsigned short width; + unsigned short height; + + /* Screen info */ + unsigned short xres; + unsigned short yres; + unsigned short bpp; + + unsigned pixclock; /* pixclock in picoseconds */ + unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */ + unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */ + unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */ + unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */ + unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */ + unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */ + + /* lcd configuration registers */ + unsigned long lcdcon5; +#define S3C2410_LCDCON5_BPP24BL (1<<12) +#define S3C2410_LCDCON5_FRM565 (1<<11) +#define S3C2410_LCDCON5_INVVCLK (1<<10) +#define S3C2410_LCDCON5_INVVLINE (1<<9) +#define S3C2410_LCDCON5_INVVFRAME (1<<8) +#define S3C2410_LCDCON5_INVVD (1<<7) +#define S3C2410_LCDCON5_INVVDEN (1<<6) +#define S3C2410_LCDCON5_INVPWREN (1<<5) +#define S3C2410_LCDCON5_INVLEND (1<<4) +#define S3C2410_LCDCON5_PWREN (1<<3) +#define S3C2410_LCDCON5_ENLEND (1<<2) +#define S3C2410_LCDCON5_BSWP (1<<1) +#define S3C2410_LCDCON5_HWSWP (1<<0) +}; + +struct s3c2410fb_mach_info { + + struct s3c2410fb_display *displays; /* attached displays info */ + unsigned num_displays; /* number of defined displays */ + unsigned default_display; + + /* GPIOs */ + + unsigned long gpcup; + unsigned long gpcup_mask; + unsigned long gpccon; + unsigned long gpccon_mask; + unsigned long gpdup; + unsigned long gpdup_mask; + unsigned long gpdcon; + unsigned long gpdcon_mask; + + void __iomem * gpccon_reg; + void __iomem * gpcup_reg; + void __iomem * gpdcon_reg; + void __iomem * gpdup_reg; + + /* lpc3600 control register */ + unsigned long lpcsel; +}; + +extern void s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *); + +#endif /* __ASM_PLAT_FB_S3C2410_H */ diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h index 33310b11cbdd..bacb86db3112 100644 --- a/include/linux/platform_data/mmc-s3cmci.h +++ b/include/linux/platform_data/mmc-s3cmci.h @@ -35,6 +35,7 @@ struct s3c24xx_mci_pdata { unsigned long ocr_avail; void (*set_power)(unsigned char power_mode, unsigned short vdd); + struct gpio_desc *bus[6]; }; /** @@ -44,6 +45,7 @@ struct s3c24xx_mci_pdata { * Copy the platform data supplied by @pdata so that this can be marked * __initdata. */ +extern void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd); extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); #endif /* _ARCH_NCI_H */ diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h index 4dc9b8760166..a170939832d5 100644 --- a/include/linux/platform_data/s3c-hsudc.h +++ b/include/linux/platform_data/s3c-hsudc.h @@ -26,6 +26,8 @@ struct s3c24xx_hsudc_platdata { unsigned int epnum; void (*gpio_init)(void); void (*gpio_uninit)(void); + void (*phy_init)(void); + void (*phy_uninit)(void); }; #endif /* __LINUX_USB_S3C_HSUDC_H */ diff --git a/include/linux/soc/samsung/s3c-adc.h b/include/linux/soc/samsung/s3c-adc.h new file mode 100644 index 000000000000..591c94ef957d --- /dev/null +++ b/include/linux/soc/samsung/s3c-adc.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C ADC driver information + */ + +#ifndef __LINUX_SOC_SAMSUNG_S3C_ADC_H +#define __LINUX_SOC_SAMSUNG_S3C_ADC_H __FILE__ + +struct s3c_adc_client; +struct platform_device; + +extern int s3c_adc_start(struct s3c_adc_client *client, + unsigned int channel, unsigned int nr_samples); + +extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch); + +extern struct s3c_adc_client * + s3c_adc_register(struct platform_device *pdev, + void (*select)(struct s3c_adc_client *client, + unsigned selected), + void (*conv)(struct s3c_adc_client *client, + unsigned d0, unsigned d1, + unsigned *samples_left), + unsigned int is_ts); + +extern void s3c_adc_release(struct s3c_adc_client *client); + +#endif /* __LINUX_SOC_SAMSUNG_S3C_ADC_H */ diff --git a/include/linux/soc/samsung/s3c-cpu-freq.h b/include/linux/soc/samsung/s3c-cpu-freq.h new file mode 100644 index 000000000000..63e88fd5dea2 --- /dev/null +++ b/include/linux/soc/samsung/s3c-cpu-freq.h @@ -0,0 +1,145 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2006-2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C CPU frequency scaling support - driver and board + */ +#ifndef __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H +#define __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H + +#include <linux/cpufreq.h> + +struct s3c_cpufreq_info; +struct s3c_cpufreq_board; +struct s3c_iotimings; + +/** + * struct s3c_freq - frequency information (mainly for core drivers) + * @fclk: The FCLK frequency in Hz. + * @armclk: The ARMCLK frequency in Hz. + * @hclk_tns: HCLK cycle time in 10ths of nano-seconds. + * @hclk: The HCLK frequency in Hz. + * @pclk: The PCLK frequency in Hz. + * + * This contains the frequency information about the current configuration + * mainly for the core drivers to ensure we do not end up passing about + * a large number of parameters. + * + * The @hclk_tns field is a useful cache for the parts of the drivers that + * need to calculate IO timings and suchlike. + */ +struct s3c_freq { + unsigned long fclk; + unsigned long armclk; + unsigned long hclk_tns; /* in 10ths of ns */ + unsigned long hclk; + unsigned long pclk; +}; + +/** + * struct s3c_cpufreq_freqs - s3c cpufreq notification information. + * @freqs: The cpufreq setting information. + * @old: The old clock settings. + * @new: The new clock settings. + * @pll_changing: Set if the PLL is changing. + * + * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the + * notification can use this information that is not provided by just + * having the core frequency alone. + * + * The pll_changing flag is used to indicate if the PLL itself is + * being set during this change. This is important as the clocks + * will temporarily be set to the XTAL clock during this time, so + * drivers may want to close down their output during this time. + * + * Note, this is not being used by any current drivers and therefore + * may be removed in the future. + */ +struct s3c_cpufreq_freqs { + struct cpufreq_freqs freqs; + struct s3c_freq old; + struct s3c_freq new; + + unsigned int pll_changing:1; +}; + +#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs) + +/** + * struct s3c_clkdivs - clock divisor information + * @p_divisor: Divisor from FCLK to PCLK. + * @h_divisor: Divisor from FCLK to HCLK. + * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs). + * @dvs: Non-zero if using DVS mode for ARMCLK. + * + * Divisor settings for the core clocks. + */ +struct s3c_clkdivs { + int p_divisor; + int h_divisor; + int arm_divisor; + unsigned char dvs; +}; + +#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s)) + +/** + * struct s3c_pllval - PLL value entry. + * @freq: The frequency for this entry in Hz. + * @pll_reg: The PLL register setting for this PLL value. + */ +struct s3c_pllval { + unsigned long freq; + unsigned long pll_reg; +}; + +/** + * struct s3c_cpufreq_board - per-board cpu frequency informatin + * @refresh: The SDRAM refresh period in nanoseconds. + * @auto_io: Set if the IO timing settings should be generated from the + * initialisation time hardware registers. + * @need_io: Set if the board has external IO on any of the chipselect + * lines that will require the hardware timing registers to be + * updated on a clock change. + * @max: The maxium frequency limits for the system. Any field that + * is left at zero will use the CPU's settings. + * + * This contains the board specific settings that affect how the CPU + * drivers chose settings. These include the memory refresh and IO + * timing information. + * + * Registration depends on the driver being used, the ARMCLK only + * implementation does not currently need this but the older style + * driver requires this to be available. + */ +struct s3c_cpufreq_board { + unsigned int refresh; + unsigned int auto_io:1; /* automatically init io timings. */ + unsigned int need_io:1; /* set if needs io timing support. */ + + /* any non-zero field in here is taken as an upper limit. */ + struct s3c_freq max; /* frequency limits */ +}; + +/* Things depending on frequency scaling. */ +#ifdef CONFIG_ARM_S3C_CPUFREQ +#define __init_or_cpufreq +#else +#define __init_or_cpufreq __init +#endif + +/* Board functions */ + +#ifdef CONFIG_ARM_S3C_CPUFREQ +extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board); +#else + +static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) +{ + return 0; +} +#endif /* CONFIG_ARM_S3C_CPUFREQ */ + +#endif diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h new file mode 100644 index 000000000000..3b278afb769b --- /dev/null +++ b/include/linux/soc/samsung/s3c-cpufreq-core.h @@ -0,0 +1,299 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2006-2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C CPU frequency scaling support - core support + */ +#ifndef __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H +#define __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H + +#include <linux/soc/samsung/s3c-cpu-freq.h> + +struct seq_file; + +#define MAX_BANKS (8) +#define S3C2412_MAX_IO (8) + +/** + * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings + * @bankcon: The cached version of settings in this structure. + * @tacp: + * @tacs: Time from address valid to nCS asserted. + * @tcos: Time from nCS asserted to nOE or nWE asserted. + * @tacc: Time that nOE or nWE is asserted. + * @tcoh: Time nCS is held after nOE or nWE are released. + * @tcah: Time address is held for after + * @nwait_en: Whether nWAIT is enabled for this bank. + * + * This structure represents the IO timings for a S3C2410 style IO bank + * used by the CPU frequency support if it needs to change the settings + * of the IO. + */ +struct s3c2410_iobank_timing { + unsigned long bankcon; + unsigned int tacp; + unsigned int tacs; + unsigned int tcos; + unsigned int tacc; + unsigned int tcoh; /* nCS hold after nOE/nWE */ + unsigned int tcah; /* Address hold after nCS */ + unsigned char nwait_en; /* nWait enabled for bank. */ +}; + +/** + * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO + * @idcy: The idle cycle time between transactions. + * @wstrd: nCS release to end of read cycle. + * @wstwr: nCS release to end of write cycle. + * @wstoen: nCS assertion to nOE assertion time. + * @wstwen: nCS assertion to nWE assertion time. + * @wstbrd: Burst ready delay. + * @smbidcyr: Register cache for smbidcyr value. + * @smbwstrd: Register cache for smbwstrd value. + * @smbwstwr: Register cache for smbwstwr value. + * @smbwstoen: Register cache for smbwstoen value. + * @smbwstwen: Register cache for smbwstwen value. + * @smbwstbrd: Register cache for smbwstbrd value. + * + * Timing information for a IO bank on an S3C2412 or similar system which + * uses a PL093 block. + */ +struct s3c2412_iobank_timing { + unsigned int idcy; + unsigned int wstrd; + unsigned int wstwr; + unsigned int wstoen; + unsigned int wstwen; + unsigned int wstbrd; + + /* register cache */ + unsigned char smbidcyr; + unsigned char smbwstrd; + unsigned char smbwstwr; + unsigned char smbwstoen; + unsigned char smbwstwen; + unsigned char smbwstbrd; +}; + +union s3c_iobank { + struct s3c2410_iobank_timing *io_2410; + struct s3c2412_iobank_timing *io_2412; +}; + +/** + * struct s3c_iotimings - Chip IO timings holder + * @bank: The timings for each IO bank. + */ +struct s3c_iotimings { + union s3c_iobank bank[MAX_BANKS]; +}; + +/** + * struct s3c_plltab - PLL table information. + * @vals: List of PLL values. + * @size: Size of the PLL table @vals. + */ +struct s3c_plltab { + struct s3c_pllval *vals; + int size; +}; + +/** + * struct s3c_cpufreq_config - current cpu frequency configuration + * @freq: The current settings for the core clocks. + * @max: Maxium settings, derived from core, board and user settings. + * @pll: The PLL table entry for the current PLL settings. + * @divs: The divisor settings for the core clocks. + * @info: The current core driver information. + * @board: The information for the board we are running on. + * @lock_pll: Set if the PLL settings cannot be changed. + * + * This is for the core drivers that need to know information about + * the current settings and values. It should not be needed by any + * device drivers. +*/ +struct s3c_cpufreq_config { + struct s3c_freq freq; + struct s3c_freq max; + struct clk *mpll; + struct cpufreq_frequency_table pll; + struct s3c_clkdivs divs; + struct s3c_cpufreq_info *info; /* for core, not drivers */ + struct s3c_cpufreq_board *board; + + unsigned int lock_pll:1; +}; + +/** + * struct s3c_cpufreq_info - Information for the CPU frequency driver. + * @name: The name of this implementation. + * @max: The maximum frequencies for the system. + * @latency: Transition latency to give to cpufreq. + * @locktime_m: The lock-time in uS for the MPLL. + * @locktime_u: The lock-time in uS for the UPLL. + * @locttime_bits: The number of bits each LOCKTIME field. + * @need_pll: Set if this driver needs to change the PLL values to achieve + * any frequency changes. This is really only need by devices like the + * S3C2410 where there is no or limited divider between the PLL and the + * ARMCLK. + * @get_iotiming: Get the current IO timing data, mainly for use at start. + * @set_iotiming: Update the IO timings from the cached copies calculated + * from the @calc_iotiming entry when changing the frequency. + * @calc_iotiming: Calculate and update the cached copies of the IO timings + * from the newly calculated frequencies. + * @calc_freqtable: Calculate (fill in) the given frequency table from the + * current frequency configuration. If the table passed in is NULL, + * then the return is the number of elements to be filled for allocation + * of the table. + * @set_refresh: Set the memory refresh configuration. + * @set_fvco: Set the PLL frequencies. + * @set_divs: Update the clock divisors. + * @calc_divs: Calculate the clock divisors. + */ +struct s3c_cpufreq_info { + const char *name; + struct s3c_freq max; + + unsigned int latency; + + unsigned int locktime_m; + unsigned int locktime_u; + unsigned char locktime_bits; + + unsigned int need_pll:1; + + /* driver routines */ + + int (*get_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + void (*set_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + int (*calc_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + int (*calc_freqtable)(struct s3c_cpufreq_config *cfg, + struct cpufreq_frequency_table *t, + size_t table_size); + + void (*debug_io_show)(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + + void (*set_refresh)(struct s3c_cpufreq_config *cfg); + void (*set_fvco)(struct s3c_cpufreq_config *cfg); + void (*set_divs)(struct s3c_cpufreq_config *cfg); + int (*calc_divs)(struct s3c_cpufreq_config *cfg); +}; + +extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info); + +extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, + unsigned int plls_no); + +/* exports and utilities for debugfs */ +extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); +extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void); + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS +#define s3c_cpufreq_debugfs_call(x) x +#else +#define s3c_cpufreq_debugfs_call(x) NULL +#endif + +/* Useful utility functions. */ + +extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *); + +/* S3C2410 and compatible exported functions */ + +extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); +extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); + +#ifdef CONFIG_S3C2410_IOTIMING +extern void s3c2410_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + +extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); + +extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + +extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); +#else +#define s3c2410_iotiming_debugfs NULL +#define s3c2410_iotiming_calc NULL +#define s3c2410_iotiming_get NULL +#define s3c2410_iotiming_set NULL +#endif /* CONFIG_S3C2410_IOTIMING */ + +/* S3C2412 compatible routines */ + +#ifdef CONFIG_S3C2412_IOTIMING +extern void s3c2412_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + +extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + +extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); + +extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); +extern void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); +#else +#define s3c2412_iotiming_debugfs NULL +#define s3c2412_iotiming_calc NULL +#define s3c2412_iotiming_get NULL +#define s3c2412_iotiming_set NULL +#endif /* CONFIG_S3C2412_IOTIMING */ + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG +#define s3c_freq_dbg(x...) printk(KERN_INFO x) +#else +#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0) +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */ + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG +#define s3c_freq_iodbg(x...) printk(KERN_INFO x) +#else +#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0) +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */ + +static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, + int index, size_t table_size, + unsigned int freq) +{ + if (index < 0) + return index; + + if (table) { + if (index >= table_size) + return -ENOMEM; + + s3c_freq_dbg("%s: { %d = %u kHz }\n", + __func__, index, freq); + + table[index].driver_data = index; + table[index].frequency = freq; + } + + return index + 1; +} + +u32 s3c2440_read_camdivn(void); +void s3c2440_write_camdivn(u32 camdiv); +u32 s3c24xx_read_clkdivn(void); +void s3c24xx_write_clkdivn(u32 clkdiv); +u32 s3c24xx_read_mpllcon(void); +void s3c24xx_write_locktime(u32 locktime); + +#endif diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h new file mode 100644 index 000000000000..f9164559c99f --- /dev/null +++ b/include/linux/soc/samsung/s3c-pm.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Tomasz Figa <t.figa@samsung.com> + * Copyright (c) 2004 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Written by Ben Dooks, <ben@simtec.co.uk> + */ + +#ifndef __LINUX_SOC_SAMSUNG_S3C_PM_H +#define __LINUX_SOC_SAMSUNG_S3C_PM_H __FILE__ + +#include <linux/types.h> + +/* PM debug functions */ + +/** + * struct pm_uart_save - save block for core UART + * @ulcon: Save value for S3C2410_ULCON + * @ucon: Save value for S3C2410_UCON + * @ufcon: Save value for S3C2410_UFCON + * @umcon: Save value for S3C2410_UMCON + * @ubrdiv: Save value for S3C2410_UBRDIV + * + * Save block for UART registers to be held over sleep and restored if they + * are needed (say by debug). +*/ +struct pm_uart_save { + u32 ulcon; + u32 ucon; + u32 ufcon; + u32 umcon; + u32 ubrdiv; + u32 udivslot; +}; + +#ifdef CONFIG_SAMSUNG_PM_DEBUG +/** + * s3c_pm_dbg() - low level debug function for use in suspend/resume. + * @msg: The message to print. + * + * This function is used mainly to debug the resume process before the system + * can rely on printk/console output. It uses the low-level debugging output + * routine printascii() to do its work. + */ +extern void s3c_pm_dbg(const char *msg, ...); + +#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt) + +extern void s3c_pm_save_uarts(bool is_s3c24xx); +extern void s3c_pm_restore_uarts(bool is_s3c24xx); + +#ifdef CONFIG_ARCH_S3C64XX +extern void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save); +#else +static inline void +s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) +{ +} +#endif + +#else +#define S3C_PMDBG(fmt...) pr_debug(fmt) + +static inline void s3c_pm_save_uarts(bool is_s3c24xx) { } +static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { } +#endif + +/* suspend memory checking */ + +#ifdef CONFIG_SAMSUNG_PM_CHECK +extern void s3c_pm_check_prepare(void); +extern void s3c_pm_check_restore(void); +extern void s3c_pm_check_cleanup(void); +extern void s3c_pm_check_store(void); +#else +#define s3c_pm_check_prepare() do { } while (0) +#define s3c_pm_check_restore() do { } while (0) +#define s3c_pm_check_cleanup() do { } while (0) +#define s3c_pm_check_store() do { } while (0) +#endif + +/* system device subsystems */ + +extern struct bus_type s3c2410_subsys; +extern struct bus_type s3c2410a_subsys; +extern struct bus_type s3c2412_subsys; +extern struct bus_type s3c2416_subsys; +extern struct bus_type s3c2440_subsys; +extern struct bus_type s3c2442_subsys; +extern struct bus_type s3c2443_subsys; + +#endif diff --git a/include/linux/spi/s3c24xx-fiq.h b/include/linux/spi/s3c24xx-fiq.h new file mode 100644 index 000000000000..d2842ac1de27 --- /dev/null +++ b/include/linux/spi/s3c24xx-fiq.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* linux/drivers/spi/spi_s3c24xx_fiq.h + * + * Copyright 2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX SPI - FIQ pseudo-DMA transfer support +*/ + +#ifndef __LINUX_SPI_S3C24XX_FIQ_H +#define __LINUX_SPI_S3C24XX_FIQ_H __FILE__ + +/* We have R8 through R13 to play with */ + +#ifdef __ASSEMBLY__ +#define __REG_NR(x) r##x +#else + +extern struct spi_fiq_code s3c24xx_spi_fiq_txrx; +extern struct spi_fiq_code s3c24xx_spi_fiq_tx; +extern struct spi_fiq_code s3c24xx_spi_fiq_rx; + +#define __REG_NR(x) (x) +#endif + +#define fiq_rspi __REG_NR(8) +#define fiq_rtmp __REG_NR(9) +#define fiq_rrx __REG_NR(10) +#define fiq_rtx __REG_NR(11) +#define fiq_rcount __REG_NR(12) +#define fiq_rirq __REG_NR(13) + +#endif /* __LINUX_SPI_S3C24XX_FIQ_H */ diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h index c91d10b82f08..440a71593162 100644 --- a/include/linux/spi/s3c24xx.h +++ b/include/linux/spi/s3c24xx.h @@ -20,6 +20,6 @@ struct s3c2410_spi_info { void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; -extern int s3c24xx_set_fiq(unsigned int irq, bool on); +extern int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on); #endif /* __LINUX_SPI_S3C24XX_H */ diff --git a/include/media/drv-intf/s3c_camif.h b/include/media/drv-intf/s3c_camif.h index d1200b40f53a..f746851a5ce6 100644 --- a/include/media/drv-intf/s3c_camif.h +++ b/include/media/drv-intf/s3c_camif.h @@ -35,8 +35,4 @@ struct s3c_camif_plat_data { int (*gpio_put)(void); }; -/* Platform default helper functions */ -int s3c_camif_gpio_get(void); -int s3c_camif_gpio_put(void); - #endif /* MEDIA_S3C_CAMIF_ */ |