diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/net/cfg80211.h | 223 | ||||
| -rw-r--r-- | include/net/fq.h | 3 | ||||
| -rw-r--r-- | include/net/fq_impl.h | 7 | ||||
| -rw-r--r-- | include/net/mac80211.h | 75 | ||||
| -rw-r--r-- | include/uapi/linux/nl80211.h | 270 |
5 files changed, 563 insertions, 15 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index bd26cc6e2d79..fe78f02a242e 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -5,7 +5,7 @@ * * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH - * Copyright 2015 Intel Deutschland GmbH + * Copyright 2015-2016 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -593,6 +593,8 @@ struct survey_info { s8 noise; }; +#define CFG80211_MAX_WEP_KEYS 4 + /** * struct cfg80211_crypto_settings - Crypto settings * @wpa_versions: indicates which, if any, WPA versions are enabled @@ -610,6 +612,9 @@ struct survey_info { * allowed through even on unauthorized ports * @control_port_no_encrypt: TRUE to prevent encryption of control port * protocol frames. + * @wep_keys: static WEP keys, if not NULL points to an array of + * CFG80211_MAX_WEP_KEYS WEP keys + * @wep_tx_key: key index (0..3) of the default TX static WEP key */ struct cfg80211_crypto_settings { u32 wpa_versions; @@ -621,6 +626,8 @@ struct cfg80211_crypto_settings { bool control_port; __be16 control_port_ethertype; bool control_port_no_encrypt; + struct key_params *wep_keys; + int wep_tx_key; }; /** @@ -676,6 +683,18 @@ struct cfg80211_acl_data { struct mac_address mac_addrs[]; }; +/* + * cfg80211_bitrate_mask - masks for bitrate control + */ +struct cfg80211_bitrate_mask { + struct { + u32 legacy; + u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN]; + u16 vht_mcs[NL80211_VHT_NSS_MAX]; + enum nl80211_txrate_gi gi; + } control[NUM_NL80211_BANDS]; +}; + /** * struct cfg80211_ap_settings - AP configuration * @@ -700,6 +719,7 @@ struct cfg80211_acl_data { * MAC address based access control * @pbss: If set, start as a PCP instead of AP. Relevant for DMG * networks. + * @beacon_rate: bitrate to be used for beacons */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -719,6 +739,7 @@ struct cfg80211_ap_settings { bool p2p_opp_ps; const struct cfg80211_acl_data *acl; bool pbss; + struct cfg80211_bitrate_mask beacon_rate; }; /** @@ -1351,6 +1372,7 @@ struct mesh_config { * @beacon_interval: beacon interval to use * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a] * @basic_rates: basic rates to use when creating the mesh + * @beacon_rate: bitrate to be used for beacons * * These parameters are fixed when the mesh is created. */ @@ -1371,6 +1393,7 @@ struct mesh_setup { u16 beacon_interval; int mcast_rate[NUM_NL80211_BANDS]; u32 basic_rates; + struct cfg80211_bitrate_mask beacon_rate; }; /** @@ -2010,17 +2033,6 @@ enum wiphy_params_flags { WIPHY_PARAM_DYN_ACK = 1 << 5, }; -/* - * cfg80211_bitrate_mask - masks for bitrate control - */ -struct cfg80211_bitrate_mask { - struct { - u32 legacy; - u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN]; - u16 vht_mcs[NL80211_VHT_NSS_MAX]; - enum nl80211_txrate_gi gi; - } control[NUM_NL80211_BANDS]; -}; /** * struct cfg80211_pmksa - PMK Security Association * @@ -2302,6 +2314,98 @@ struct cfg80211_qos_map { }; /** + * struct cfg80211_nan_conf - NAN configuration + * + * This struct defines NAN configuration parameters + * + * @master_pref: master preference (1 - 255) + * @dual: dual band operation mode, see &enum nl80211_nan_dual_band_conf + */ +struct cfg80211_nan_conf { + u8 master_pref; + u8 dual; +}; + +/** + * enum cfg80211_nan_conf_changes - indicates changed fields in NAN + * configuration + * + * @CFG80211_NAN_CONF_CHANGED_PREF: master preference + * @CFG80211_NAN_CONF_CHANGED_DUAL: dual band operation + */ +enum cfg80211_nan_conf_changes { + CFG80211_NAN_CONF_CHANGED_PREF = BIT(0), + CFG80211_NAN_CONF_CHANGED_DUAL = BIT(1), +}; + +/** + * struct cfg80211_nan_func_filter - a NAN function Rx / Tx filter + * + * @filter: the content of the filter + * @len: the length of the filter + */ +struct cfg80211_nan_func_filter { + const u8 *filter; + u8 len; +}; + +/** + * struct cfg80211_nan_func - a NAN function + * + * @type: &enum nl80211_nan_function_type + * @service_id: the service ID of the function + * @publish_type: &nl80211_nan_publish_type + * @close_range: if true, the range should be limited. Threshold is + * implementation specific. + * @publish_bcast: if true, the solicited publish should be broadcasted + * @subscribe_active: if true, the subscribe is active + * @followup_id: the instance ID for follow up + * @followup_reqid: the requestor instance ID for follow up + * @followup_dest: MAC address of the recipient of the follow up + * @ttl: time to live counter in DW. + * @serv_spec_info: Service Specific Info + * @serv_spec_info_len: Service Specific Info length + * @srf_include: if true, SRF is inclusive + * @srf_bf: Bloom Filter + * @srf_bf_len: Bloom Filter length + * @srf_bf_idx: Bloom Filter index + * @srf_macs: SRF MAC addresses + * @srf_num_macs: number of MAC addresses in SRF + * @rx_filters: rx filters that are matched with corresponding peer's tx_filter + * @tx_filters: filters that should be transmitted in the SDF. + * @num_rx_filters: length of &rx_filters. + * @num_tx_filters: length of &tx_filters. + * @instance_id: driver allocated id of the function. + * @cookie: unique NAN function identifier. + */ +struct cfg80211_nan_func { + enum nl80211_nan_function_type type; + u8 service_id[NL80211_NAN_FUNC_SERVICE_ID_LEN]; + u8 publish_type; + bool close_range; + bool publish_bcast; + bool subscribe_active; + u8 followup_id; + u8 followup_reqid; + struct mac_address followup_dest; + u32 ttl; + const u8 *serv_spec_info; + u8 serv_spec_info_len; + bool srf_include; + const u8 *srf_bf; + u8 srf_bf_len; + u8 srf_bf_idx; + struct mac_address *srf_macs; + int srf_num_macs; + struct cfg80211_nan_func_filter *rx_filters; + struct cfg80211_nan_func_filter *tx_filters; + u8 num_tx_filters; + u8 num_rx_filters; + u8 instance_id; + u64 cookie; +}; + +/** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks @@ -2589,6 +2693,19 @@ struct cfg80211_qos_map { * and returning to the base channel for communication with the AP. * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both * peers must be on the base channel when the call completes. + * @start_nan: Start the NAN interface. + * @stop_nan: Stop the NAN interface. + * @add_nan_func: Add a NAN function. Returns negative value on failure. + * On success @nan_func ownership is transferred to the driver and + * it may access it outside of the scope of this function. The driver + * should free the @nan_func when no longer needed by calling + * cfg80211_free_nan_func(). + * On success the driver should assign an instance_id in the + * provided @nan_func. + * @del_nan_func: Delete a NAN function. + * @nan_change_conf: changes NAN configuration. The changed parameters must + * be specified in @changes (using &enum cfg80211_nan_conf_changes); + * All other parameters must be ignored. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2854,6 +2971,17 @@ struct cfg80211_ops { void (*tdls_cancel_channel_switch)(struct wiphy *wiphy, struct net_device *dev, const u8 *addr); + int (*start_nan)(struct wiphy *wiphy, struct wireless_dev *wdev, + struct cfg80211_nan_conf *conf); + void (*stop_nan)(struct wiphy *wiphy, struct wireless_dev *wdev); + int (*add_nan_func)(struct wiphy *wiphy, struct wireless_dev *wdev, + struct cfg80211_nan_func *nan_func); + void (*del_nan_func)(struct wiphy *wiphy, struct wireless_dev *wdev, + u64 cookie); + int (*nan_change_conf)(struct wiphy *wiphy, + struct wireless_dev *wdev, + struct cfg80211_nan_conf *conf, + u32 changes); }; /* @@ -2900,6 +3028,8 @@ struct cfg80211_ops { * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in * beaconing mode (AP, IBSS, Mesh, ...). + * @WIPHY_FLAG_HAS_STATIC_WEP: The device supports static WEP key installation + * before connection. */ enum wiphy_flags { /* use hole at 0 */ @@ -2925,6 +3055,7 @@ enum wiphy_flags { WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21), WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22), WIPHY_FLAG_HAS_CHANNEL_SWITCH = BIT(23), + WIPHY_FLAG_HAS_STATIC_WEP = BIT(24), }; /** @@ -3302,6 +3433,8 @@ struct wiphy_iftype_ext_capab { * @bss_select_support: bitmask indicating the BSS selection criteria supported * by the driver in the .connect() callback. The bit position maps to the * attribute indices defined in &enum nl80211_bss_select_attr. + * + * @cookie_counter: unique generic cookie counter, used to identify objects. */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -3431,6 +3564,8 @@ struct wiphy { u32 bss_select_support; + u64 cookie_counter; + char priv[0] __aligned(NETDEV_ALIGN); }; @@ -3611,6 +3746,7 @@ struct cfg80211_cached_keys; * beacons, 0 when not valid * @address: The address for this device, valid only if @netdev is %NULL * @p2p_started: true if this is a P2P Device that has been started + * @nan_started: true if this is a NAN interface that has been started * @cac_started: true if DFS channel availability check has been started * @cac_start_time: timestamp (jiffies) when the dfs state was entered. * @cac_time_ms: CAC time in ms @@ -3642,7 +3778,7 @@ struct wireless_dev { struct mutex mtx; - bool use_4addr, p2p_started; + bool use_4addr, p2p_started, nan_started; u8 address[ETH_ALEN] __aligned(sizeof(u16)); @@ -5550,6 +5686,67 @@ wiphy_ext_feature_isset(struct wiphy *wiphy, return (ft_byte & BIT(ftidx % 8)) != 0; } +/** + * cfg80211_free_nan_func - free NAN function + * @f: NAN function that should be freed + * + * Frees all the NAN function and all it's allocated members. + */ +void cfg80211_free_nan_func(struct cfg80211_nan_func *f); + +/** + * struct cfg80211_nan_match_params - NAN match parameters + * @type: the type of the function that triggered a match. If it is + * %NL80211_NAN_FUNC_SUBSCRIBE it means that we replied to a subscriber. + * If it is %NL80211_NAN_FUNC_PUBLISH, it means that we got a discovery + * result. + * If it is %NL80211_NAN_FUNC_FOLLOW_UP, we received a follow up. + * @inst_id: the local instance id + * @peer_inst_id: the instance id of the peer's function + * @addr: the MAC address of the peer + * @info_len: the length of the &info + * @info: the Service Specific Info from the peer (if any) + * @cookie: unique identifier of the corresponding function + */ +struct cfg80211_nan_match_params { + enum nl80211_nan_function_type type; + u8 inst_id; + u8 peer_inst_id; + const u8 *addr; + u8 info_len; + const u8 *info; + u64 cookie; +}; + +/** + * cfg80211_nan_match - report a match for a NAN function. + * @wdev: the wireless device reporting the match + * @match: match notification parameters + * @gfp: allocation flags + * + * This function reports that the a NAN function had a match. This + * can be a subscribe that had a match or a solicited publish that + * was sent. It can also be a follow up that was received. + */ +void cfg80211_nan_match(struct wireless_dev *wdev, + struct cfg80211_nan_match_params *match, gfp_t gfp); + +/** + * cfg80211_nan_func_terminated - notify about NAN function termination. + * + * @wdev: the wireless device reporting the match + * @inst_id: the local instance id + * @reason: termination reason (one of the NL80211_NAN_FUNC_TERM_REASON_*) + * @cookie: unique NAN function identifier + * @gfp: allocation flags + * + * This function reports that the a NAN function is terminated. + */ +void cfg80211_nan_func_terminated(struct wireless_dev *wdev, + u8 inst_id, + enum nl80211_nan_func_term_reason reason, + u64 cookie, gfp_t gfp); + /* ethtool helper */ void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info); diff --git a/include/net/fq.h b/include/net/fq.h index 268b49049c37..6d8521a30c5c 100644 --- a/include/net/fq.h +++ b/include/net/fq.h @@ -72,9 +72,12 @@ struct fq { u32 flows_cnt; u32 perturbation; u32 limit; + u32 memory_limit; + u32 memory_usage; u32 quantum; u32 backlog; u32 overlimit; + u32 overmemory; u32 collisions; }; diff --git a/include/net/fq_impl.h b/include/net/fq_impl.h index 163f3ed0f05a..4e6131cd3f43 100644 --- a/include/net/fq_impl.h +++ b/include/net/fq_impl.h @@ -29,6 +29,7 @@ static struct sk_buff *fq_flow_dequeue(struct fq *fq, tin->backlog_packets--; flow->backlog -= skb->len; fq->backlog--; + fq->memory_usage -= skb->truesize; if (flow->backlog == 0) { list_del_init(&flow->backlogchain); @@ -154,6 +155,7 @@ static void fq_tin_enqueue(struct fq *fq, flow->backlog += skb->len; tin->backlog_bytes += skb->len; tin->backlog_packets++; + fq->memory_usage += skb->truesize; fq->backlog++; fq_recalc_backlog(fq, tin, flow); @@ -166,7 +168,7 @@ static void fq_tin_enqueue(struct fq *fq, __skb_queue_tail(&flow->queue, skb); - if (fq->backlog > fq->limit) { + if (fq->backlog > fq->limit || fq->memory_usage > fq->memory_limit) { flow = list_first_entry_or_null(&fq->backlogs, struct fq_flow, backlogchain); @@ -181,6 +183,8 @@ static void fq_tin_enqueue(struct fq *fq, flow->tin->overlimit++; fq->overlimit++; + if (fq->memory_usage > fq->memory_limit) + fq->overmemory++; } } @@ -251,6 +255,7 @@ static int fq_init(struct fq *fq, int flows_cnt) fq->perturbation = prandom_u32(); fq->quantum = 300; fq->limit = 8192; + fq->memory_limit = 16 << 20; /* 16 MBytes */ fq->flows = kcalloc(fq->flows_cnt, sizeof(fq->flows[0]), GFP_KERNEL); if (!fq->flows) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 5296100f3889..a810dfcb83c2 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -715,6 +715,7 @@ enum mac80211_tx_info_flags { * frame (PS-Poll or uAPSD). * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information * @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame + * @IEEE80211_TX_CTRL_FAST_XMIT: This frame is going through the fast_xmit path * * These flags are used in tx_info->control.flags. */ @@ -723,6 +724,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTRL_PS_RESPONSE = BIT(1), IEEE80211_TX_CTRL_RATE_INJECT = BIT(2), IEEE80211_TX_CTRL_AMSDU = BIT(3), + IEEE80211_TX_CTRL_FAST_XMIT = BIT(4), }; /* @@ -2177,6 +2179,8 @@ enum ieee80211_hw_flags { * @n_cipher_schemes: a size of an array of cipher schemes definitions. * @cipher_schemes: a pointer to an array of cipher scheme definitions * supported by HW. + * @max_nan_de_entries: maximum number of NAN DE functions supported by the + * device. */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -2211,6 +2215,7 @@ struct ieee80211_hw { u8 uapsd_max_sp_len; u8 n_cipher_schemes; const struct ieee80211_cipher_scheme *cipher_schemes; + u8 max_nan_de_entries; }; static inline bool _ieee80211_hw_check(struct ieee80211_hw *hw, @@ -3166,6 +3171,12 @@ enum ieee80211_reconfig_type { * required function. * The callback can sleep. * + * @offset_tsf: Offset the TSF timer by the specified value in the + * firmware/hardware. Preferred to set_tsf as it avoids delay between + * calling set_tsf() and hardware getting programmed, which will show up + * as TSF delay. Is not a required function. + * The callback can sleep. + * * @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize * with other STAs in the IBSS. This is only used in IBSS mode. This * function is optional if the firmware/hardware takes full care of @@ -3420,6 +3431,21 @@ enum ieee80211_reconfig_type { * synchronization which is needed in case driver has in its RSS queues * pending frames that were received prior to the control path action * currently taken (e.g. disassociation) but are not processed yet. + * + * @start_nan: join an existing NAN cluster, or create a new one. + * @stop_nan: leave the NAN cluster. + * @nan_change_conf: change NAN configuration. The data in cfg80211_nan_conf + * contains full new configuration and changes specify which parameters + * are changed with respect to the last NAN config. + * The driver gets both full configuration and the changed parameters since + * some devices may need the full configuration while others need only the + * changed parameters. + * @add_nan_func: Add a NAN function. Returns 0 on success. The data in + * cfg80211_nan_func must not be referenced outside the scope of + * this call. + * @del_nan_func: Remove a NAN function. The driver must call + * ieee80211_nan_func_terminated() with + * NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST reason code upon removal. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -3531,6 +3557,8 @@ struct ieee80211_ops { u64 (*get_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*set_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u64 tsf); + void (*offset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + s64 offset); void (*reset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); int (*tx_last_beacon)(struct ieee80211_hw *hw); int (*ampdu_action)(struct ieee80211_hw *hw, @@ -3655,6 +3683,21 @@ struct ieee80211_ops { void (*wake_tx_queue)(struct ieee80211_hw *hw, struct ieee80211_txq *txq); void (*sync_rx_queues)(struct ieee80211_hw *hw); + + int (*start_nan)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_nan_conf *conf); + int (*stop_nan)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + int (*nan_change_conf)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_nan_conf *conf, u32 changes); + int (*add_nan_func)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const struct cfg80211_nan_func *nan_func); + void (*del_nan_func)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + u8 instance_id); }; /** @@ -5728,4 +5771,36 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, void ieee80211_txq_get_depth(struct ieee80211_txq *txq, unsigned long *frame_cnt, unsigned long *byte_cnt); + +/** + * ieee80211_nan_func_terminated - notify about NAN function termination. + * + * This function is used to notify mac80211 about NAN function termination. + * Note that this function can't be called from hard irq. + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @inst_id: the local instance id + * @reason: termination reason (one of the NL80211_NAN_FUNC_TERM_REASON_*) + * @gfp: allocation flags + */ +void ieee80211_nan_func_terminated(struct ieee80211_vif *vif, + u8 inst_id, + enum nl80211_nan_func_term_reason reason, + gfp_t gfp); + +/** + * ieee80211_nan_func_match - notify about NAN function match event. + * + * This function is used to notify mac80211 about NAN function match. The + * cookie inside the match struct will be assigned by mac80211. + * Note that this function can't be called from hard irq. + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @match: match event information + * @gfp: allocation flags + */ +void ieee80211_nan_func_match(struct ieee80211_vif *vif, + struct cfg80211_nan_match_params *match, + gfp_t gfp); + #endif /* MAC80211_H */ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 220694151434..56368e9b4622 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -48,6 +48,7 @@ #define NL80211_MULTICAST_GROUP_REG "regulatory" #define NL80211_MULTICAST_GROUP_MLME "mlme" #define NL80211_MULTICAST_GROUP_VENDOR "vendor" +#define NL80211_MULTICAST_GROUP_NAN "nan" #define NL80211_MULTICAST_GROUP_TESTMODE "testmode" /** @@ -838,6 +839,41 @@ * not running. The driver indicates the status of the scan through * cfg80211_scan_done(). * + * @NL80211_CMD_START_NAN: Start NAN operation, identified by its + * %NL80211_ATTR_WDEV interface. This interface must have been previously + * created with %NL80211_CMD_NEW_INTERFACE. After it has been started, the + * NAN interface will create or join a cluster. This command must have a + * valid %NL80211_ATTR_NAN_MASTER_PREF attribute and optional + * %NL80211_ATTR_NAN_DUAL attributes. + * After this command NAN functions can be added. + * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by + * its %NL80211_ATTR_WDEV interface. + * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined + * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this + * operation returns the strictly positive and unique instance id + * (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE) + * of the function upon success. + * Since instance ID's can be re-used, this cookie is the right + * way to identify the function. This will avoid races when a termination + * event is handled by the user space after it has already added a new + * function that got the same instance id from the kernel as the one + * which just terminated. + * This cookie may be used in NAN events even before the command + * returns, so userspace shouldn't process NAN events until it processes + * the response to this command. + * Look at %NL80211_ATTR_SOCKET_OWNER as well. + * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie. + * This command is also used as a notification sent when a NAN function is + * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID + * and %NL80211_ATTR_COOKIE attributes. + * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN configuration. NAN + * must be operational (%NL80211_CMD_START_NAN was executed). + * It must contain at least one of the following attributes: + * %NL80211_ATTR_NAN_MASTER_PREF, %NL80211_ATTR_NAN_DUAL. + * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. + * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and + * %NL80211_ATTR_COOKIE. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1026,6 +1062,13 @@ enum nl80211_commands { NL80211_CMD_ABORT_SCAN, + NL80211_CMD_START_NAN, + NL80211_CMD_STOP_NAN, + NL80211_CMD_ADD_NAN_FUNCTION, + NL80211_CMD_DEL_NAN_FUNCTION, + NL80211_CMD_CHANGE_NAN_CONFIG, + NL80211_CMD_NAN_MATCH, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1343,7 +1386,13 @@ enum nl80211_commands { * enum nl80211_band value is used as the index (nla_type() of the nested * data. If a band is not included, it will be configured to allow all * rates based on negotiated supported rates information. This attribute - * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. + * is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP, + * and joining mesh networks (not IBSS yet). In the later case, it must + * specify just a single bitrate, which is to be used for the beacon. + * The driver must also specify support for this with the extended + * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, + * NL80211_EXT_FEATURE_BEACON_RATE_HT and + * NL80211_EXT_FEATURE_BEACON_RATE_VHT. * * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. @@ -1733,6 +1782,12 @@ enum nl80211_commands { * regulatory indoor configuration would be owned by the netlink socket * that configured the indoor setting, and the indoor operation would be * cleared when the socket is closed. + * If set during NAN interface creation, the interface will be destroyed + * if the socket is closed just like any other interface. Moreover, only + * the netlink socket that created the interface will be allowed to add + * and remove functions. NAN notifications will be sent in unicast to that + * socket. Without this attribute, any socket can add functions and the + * notifications will be sent to the %NL80211_MCGRP_NAN multicast group. * * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is * the TDLS link initiator. @@ -1867,6 +1922,21 @@ enum nl80211_commands { * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is * used to pull the stored data for mesh peer in power save state. * + * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by + * %NL80211_CMD_START_NAN and optionally with + * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0. + * Also, values 1 and 255 are reserved for certification purposes and + * should not be used during a normal device operation. + * @NL80211_ATTR_NAN_DUAL: NAN dual band operation config (see + * &enum nl80211_nan_dual_band_conf). This attribute is used with + * %NL80211_CMD_START_NAN and optionally with + * %NL80211_CMD_CHANGE_NAN_CONFIG. + * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See + * &enum nl80211_nan_func_attributes for description of this nested + * attribute. + * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute. + * See &enum nl80211_nan_match_attributes. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2261,6 +2331,11 @@ enum nl80211_attrs { NL80211_ATTR_MESH_PEER_AID, + NL80211_ATTR_NAN_MASTER_PREF, + NL80211_ATTR_NAN_DUAL, + NL80211_ATTR_NAN_FUNC, + NL80211_ATTR_NAN_MATCH, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2339,6 +2414,7 @@ enum nl80211_attrs { * commands to create and destroy one * @NL80211_IF_TYPE_OCB: Outside Context of a BSS * This mode corresponds to the MIB variable dot11OCBActivated=true + * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) * @NL80211_IFTYPE_MAX: highest interface type number currently defined * @NUM_NL80211_IFTYPES: number of defined interface types * @@ -2359,6 +2435,7 @@ enum nl80211_iftype { NL80211_IFTYPE_P2P_GO, NL80211_IFTYPE_P2P_DEVICE, NL80211_IFTYPE_OCB, + NL80211_IFTYPE_NAN, /* keep last */ NUM_NL80211_IFTYPES, @@ -4551,6 +4628,12 @@ enum nl80211_feature_flags { * (if available). * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of * channel dwell time. + * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate + * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. + * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate + * configuration (AP/mesh) with HT rates. + * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate + * configuration (AP/mesh) with VHT rates. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -4562,6 +4645,9 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_SCAN_START_TIME, NL80211_EXT_FEATURE_BSS_PARENT_TSF, NL80211_EXT_FEATURE_SET_SCAN_DWELL, + NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, + NL80211_EXT_FEATURE_BEACON_RATE_HT, + NL80211_EXT_FEATURE_BEACON_RATE_VHT, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -4855,4 +4941,186 @@ enum nl80211_bss_select_attr { NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 }; +/** + * enum nl80211_nan_dual_band_conf - NAN dual band configuration + * + * Defines the NAN dual band mode of operation + * + * @NL80211_NAN_BAND_DEFAULT: device default mode + * @NL80211_NAN_BAND_2GHZ: 2.4GHz mode + * @NL80211_NAN_BAND_5GHZ: 5GHz mode + */ +enum nl80211_nan_dual_band_conf { + NL80211_NAN_BAND_DEFAULT = 1 << 0, + NL80211_NAN_BAND_2GHZ = 1 << 1, + NL80211_NAN_BAND_5GHZ = 1 << 2, +}; + +/** + * enum nl80211_nan_function_type - NAN function type + * + * Defines the function type of a NAN function + * + * @NL80211_NAN_FUNC_PUBLISH: function is publish + * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe + * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up + */ +enum nl80211_nan_function_type { + NL80211_NAN_FUNC_PUBLISH, + NL80211_NAN_FUNC_SUBSCRIBE, + NL80211_NAN_FUNC_FOLLOW_UP, + + /* keep last */ + __NL80211_NAN_FUNC_TYPE_AFTER_LAST, + NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1, +}; + +/** + * enum nl80211_nan_publish_type - NAN publish tx type + * + * Defines how to send publish Service Discovery Frames + * + * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited + * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited + */ +enum nl80211_nan_publish_type { + NL80211_NAN_SOLICITED_PUBLISH = 1 << 0, + NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1, +}; + +/** + * enum nl80211_nan_func_term_reason - NAN functions termination reason + * + * Defines termination reasons of a NAN function + * + * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user + * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout + * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored + */ +enum nl80211_nan_func_term_reason { + NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST, + NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED, + NL80211_NAN_FUNC_TERM_REASON_ERROR, +}; + +#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6 +#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff +#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff + +/** + * enum nl80211_nan_func_attributes - NAN function attributes + * @__NL80211_NAN_FUNC_INVALID: invalid + * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8). + * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as + * specified in NAN spec. This is a binary attribute. + * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is + * publish. Defines the transmission type for the publish Service Discovery + * Frame, see &enum nl80211_nan_publish_type. Its type is u8. + * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited + * publish. Should the solicited publish Service Discovery Frame be sent to + * the NAN Broadcast address. This is a flag. + * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is + * subscribe. Is the subscribe active. This is a flag. + * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up. + * The instance ID for the follow up Service Discovery Frame. This is u8. + * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type + * is follow up. This is a u8. + * The requestor instance ID for the follow up Service Discovery Frame. + * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the + * follow up Service Discovery Frame. This is a binary attribute. + * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a + * close range. The range itself (RSSI) is defined by the device. + * This is a flag. + * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should + * stay active. If not present infinite TTL is assumed. This is a u32. + * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service + * specific info. This is a binary attribute. + * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute. + * See &enum nl80211_nan_srf_attributes. + * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested + * attribute. It is a list of binary values. + * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a + * nested attribute. It is a list of binary values. + * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function. + * Its type is u8 and it cannot be 0. + * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason. + * See &enum nl80211_nan_func_term_reason. + * + * @NUM_NL80211_NAN_FUNC_ATTR: internal + * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute + */ +enum nl80211_nan_func_attributes { + __NL80211_NAN_FUNC_INVALID, + NL80211_NAN_FUNC_TYPE, + NL80211_NAN_FUNC_SERVICE_ID, + NL80211_NAN_FUNC_PUBLISH_TYPE, + NL80211_NAN_FUNC_PUBLISH_BCAST, + NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE, + NL80211_NAN_FUNC_FOLLOW_UP_ID, + NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID, + NL80211_NAN_FUNC_FOLLOW_UP_DEST, + NL80211_NAN_FUNC_CLOSE_RANGE, + NL80211_NAN_FUNC_TTL, + NL80211_NAN_FUNC_SERVICE_INFO, + NL80211_NAN_FUNC_SRF, + NL80211_NAN_FUNC_RX_MATCH_FILTER, + NL80211_NAN_FUNC_TX_MATCH_FILTER, + NL80211_NAN_FUNC_INSTANCE_ID, + NL80211_NAN_FUNC_TERM_REASON, + + /* keep last */ + NUM_NL80211_NAN_FUNC_ATTR, + NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1 +}; + +/** + * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes + * @__NL80211_NAN_SRF_INVALID: invalid + * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. + * This is a flag. + * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if + * &NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. + * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if + * &NL80211_NAN_SRF_BF is present. This is a u8. + * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if + * and only if &NL80211_NAN_SRF_BF isn't present. This is a nested + * attribute. Each nested attribute is a MAC address. + * @NUM_NL80211_NAN_SRF_ATTR: internal + * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute + */ +enum nl80211_nan_srf_attributes { + __NL80211_NAN_SRF_INVALID, + NL80211_NAN_SRF_INCLUDE, + NL80211_NAN_SRF_BF, + NL80211_NAN_SRF_BF_IDX, + NL80211_NAN_SRF_MAC_ADDRS, + + /* keep last */ + NUM_NL80211_NAN_SRF_ATTR, + NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1, +}; + +/** + * enum nl80211_nan_match_attributes - NAN match attributes + * @__NL80211_NAN_MATCH_INVALID: invalid + * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the + * match. This is a nested attribute. + * See &enum nl80211_nan_func_attributes. + * @NL80211_NAN_MATCH_FUNC_PEER: the peer function + * that caused the match. This is a nested attribute. + * See &enum nl80211_nan_func_attributes. + * + * @NUM_NL80211_NAN_MATCH_ATTR: internal + * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute + */ +enum nl80211_nan_match_attributes { + __NL80211_NAN_MATCH_INVALID, + NL80211_NAN_MATCH_FUNC_LOCAL, + NL80211_NAN_MATCH_FUNC_PEER, + + /* keep last */ + NUM_NL80211_NAN_MATCH_ATTR, + NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 +}; + #endif /* __LINUX_NL80211_H */ |