diff options
Diffstat (limited to 'include/uapi/linux')
56 files changed, 1180 insertions, 141 deletions
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index 24e9033f8b3f..4c94f31a8c99 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -67,6 +67,8 @@ header-y += bfs_fs.h header-y += binfmts.h header-y += blkpg.h header-y += blktrace_api.h +header-y += bpf.h +header-y += bpf_common.h header-y += bpqether.h header-y += bsg.h header-y += btrfs.h @@ -123,6 +125,7 @@ header-y += filter.h header-y += firewire-cdev.h header-y += firewire-constants.h header-y += flat.h +header-y += fou.h header-y += fs.h header-y += fsl_hypervisor.h header-y += fuse.h @@ -139,6 +142,7 @@ header-y += hid.h header-y += hiddev.h header-y += hidraw.h header-y += hpet.h +header-y += hsr_netlink.h header-y += hyperv.h header-y += hysdn_if.h header-y += i2c-dev.h @@ -240,6 +244,7 @@ header-y += matroxfb.h header-y += mdio.h header-y += media.h header-y += mei.h +header-y += memfd.h header-y += mempolicy.h header-y += meye.h header-y += mic_common.h @@ -248,6 +253,7 @@ header-y += mii.h header-y += minix_fs.h header-y += mman.h header-y += mmtimer.h +header-y += mpls.h header-y += mqueue.h header-y += mroute.h header-y += mroute6.h @@ -353,6 +359,7 @@ header-y += serio.h header-y += shm.h header-y += signal.h header-y += signalfd.h +header-y += smiapp.h header-y += snmp.h header-y += sock_diag.h header-y += socket.h @@ -370,6 +377,7 @@ header-y += swab.h header-y += synclink.h header-y += sysctl.h header-y += sysinfo.h +header-y += target_core_user.h header-y += taskstats.h header-y += tcp.h header-y += tcp_metrics.h @@ -395,6 +403,7 @@ header-y += un.h header-y += unistd.h header-y += unix_diag.h header-y += usbdevice_fs.h +header-y += usbip.h header-y += utime.h header-y += utsname.h header-y += uuid.h @@ -418,6 +427,7 @@ header-y += virtio_net.h header-y += virtio_pci.h header-y += virtio_ring.h header-y += virtio_rng.h +header=y += vm_sockets.h header-y += vt.h header-y += wait.h header-y += wanrouter.h diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index 3b9ff33e1768..d4dbef14d4df 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -352,6 +352,7 @@ enum { #define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_M32R (EM_M32R) #define AUDIT_ARCH_M68K (EM_68K) +#define AUDIT_ARCH_MICROBLAZE (EM_MICROBLAZE) #define AUDIT_ARCH_MIPS (EM_MIPS) #define AUDIT_ARCH_MIPSEL (EM_MIPS|__AUDIT_ARCH_LE) #define AUDIT_ARCH_MIPS64 (EM_MIPS|__AUDIT_ARCH_64BIT) @@ -445,17 +446,4 @@ struct audit_rule_data { char buf[0]; /* string fields buffer */ }; -/* audit_rule is supported to maintain backward compatibility with - * userspace. It supports integer fields only and corresponds to - * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests. - */ -struct audit_rule { /* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */ - __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */ - __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */ - __u32 field_count; - __u32 mask[AUDIT_BITMASK_SIZE]; - __u32 fields[AUDIT_MAX_FIELDS]; - __u32 values[AUDIT_MAX_FIELDS]; -}; - #endif /* _UAPI_LINUX_AUDIT_H_ */ diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h new file mode 100644 index 000000000000..d18316f9e9c4 --- /dev/null +++ b/include/uapi/linux/bpf.h @@ -0,0 +1,156 @@ +/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ +#ifndef _UAPI__LINUX_BPF_H__ +#define _UAPI__LINUX_BPF_H__ + +#include <linux/types.h> +#include <linux/bpf_common.h> + +/* Extended instruction set based on top of classic BPF */ + +/* instruction classes */ +#define BPF_ALU64 0x07 /* alu mode in double word width */ + +/* ld/ldx fields */ +#define BPF_DW 0x18 /* double word */ +#define BPF_XADD 0xc0 /* exclusive add */ + +/* alu/jmp fields */ +#define BPF_MOV 0xb0 /* mov reg to reg */ +#define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */ + +/* change endianness of a register */ +#define BPF_END 0xd0 /* flags for endianness conversion: */ +#define BPF_TO_LE 0x00 /* convert to little-endian */ +#define BPF_TO_BE 0x08 /* convert to big-endian */ +#define BPF_FROM_LE BPF_TO_LE +#define BPF_FROM_BE BPF_TO_BE + +#define BPF_JNE 0x50 /* jump != */ +#define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */ +#define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */ +#define BPF_CALL 0x80 /* function call */ +#define BPF_EXIT 0x90 /* function return */ + +/* Register numbers */ +enum { + BPF_REG_0 = 0, + BPF_REG_1, + BPF_REG_2, + BPF_REG_3, + BPF_REG_4, + BPF_REG_5, + BPF_REG_6, + BPF_REG_7, + BPF_REG_8, + BPF_REG_9, + BPF_REG_10, + __MAX_BPF_REG, +}; + +/* BPF has 10 general purpose 64-bit registers and stack frame. */ +#define MAX_BPF_REG __MAX_BPF_REG + +struct bpf_insn { + __u8 code; /* opcode */ + __u8 dst_reg:4; /* dest register */ + __u8 src_reg:4; /* source register */ + __s16 off; /* signed offset */ + __s32 imm; /* signed immediate constant */ +}; + +/* BPF syscall commands */ +enum bpf_cmd { + /* create a map with given type and attributes + * fd = bpf(BPF_MAP_CREATE, union bpf_attr *, u32 size) + * returns fd or negative error + * map is deleted when fd is closed + */ + BPF_MAP_CREATE, + + /* lookup key in a given map + * err = bpf(BPF_MAP_LOOKUP_ELEM, union bpf_attr *attr, u32 size) + * Using attr->map_fd, attr->key, attr->value + * returns zero and stores found elem into value + * or negative error + */ + BPF_MAP_LOOKUP_ELEM, + + /* create or update key/value pair in a given map + * err = bpf(BPF_MAP_UPDATE_ELEM, union bpf_attr *attr, u32 size) + * Using attr->map_fd, attr->key, attr->value + * returns zero or negative error + */ + BPF_MAP_UPDATE_ELEM, + + /* find and delete elem by key in a given map + * err = bpf(BPF_MAP_DELETE_ELEM, union bpf_attr *attr, u32 size) + * Using attr->map_fd, attr->key + * returns zero or negative error + */ + BPF_MAP_DELETE_ELEM, + + /* lookup key in a given map and return next key + * err = bpf(BPF_MAP_GET_NEXT_KEY, union bpf_attr *attr, u32 size) + * Using attr->map_fd, attr->key, attr->next_key + * returns zero and stores next key or negative error + */ + BPF_MAP_GET_NEXT_KEY, + + /* verify and load eBPF program + * prog_fd = bpf(BPF_PROG_LOAD, union bpf_attr *attr, u32 size) + * Using attr->prog_type, attr->insns, attr->license + * returns fd or negative error + */ + BPF_PROG_LOAD, +}; + +enum bpf_map_type { + BPF_MAP_TYPE_UNSPEC, +}; + +enum bpf_prog_type { + BPF_PROG_TYPE_UNSPEC, +}; + +union bpf_attr { + struct { /* anonymous struct used by BPF_MAP_CREATE command */ + __u32 map_type; /* one of enum bpf_map_type */ + __u32 key_size; /* size of key in bytes */ + __u32 value_size; /* size of value in bytes */ + __u32 max_entries; /* max number of entries in a map */ + }; + + struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ + __u32 map_fd; + __aligned_u64 key; + union { + __aligned_u64 value; + __aligned_u64 next_key; + }; + }; + + struct { /* anonymous struct used by BPF_PROG_LOAD command */ + __u32 prog_type; /* one of enum bpf_prog_type */ + __u32 insn_cnt; + __aligned_u64 insns; + __aligned_u64 license; + __u32 log_level; /* verbosity level of verifier */ + __u32 log_size; /* size of user buffer */ + __aligned_u64 log_buf; /* user supplied buffer */ + }; +} __attribute__((aligned(8))); + +/* integer value in 'imm' field of BPF_CALL instruction selects which helper + * function eBPF program intends to call + */ +enum bpf_func_id { + BPF_FUNC_unspec, + __BPF_FUNC_MAX_ID, +}; + +#endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/include/uapi/linux/bpf_common.h b/include/uapi/linux/bpf_common.h new file mode 100644 index 000000000000..a5c220e0828f --- /dev/null +++ b/include/uapi/linux/bpf_common.h @@ -0,0 +1,55 @@ +#ifndef _UAPI__LINUX_BPF_COMMON_H__ +#define _UAPI__LINUX_BPF_COMMON_H__ + +/* Instruction classes */ +#define BPF_CLASS(code) ((code) & 0x07) +#define BPF_LD 0x00 +#define BPF_LDX 0x01 +#define BPF_ST 0x02 +#define BPF_STX 0x03 +#define BPF_ALU 0x04 +#define BPF_JMP 0x05 +#define BPF_RET 0x06 +#define BPF_MISC 0x07 + +/* ld/ldx fields */ +#define BPF_SIZE(code) ((code) & 0x18) +#define BPF_W 0x00 +#define BPF_H 0x08 +#define BPF_B 0x10 +#define BPF_MODE(code) ((code) & 0xe0) +#define BPF_IMM 0x00 +#define BPF_ABS 0x20 +#define BPF_IND 0x40 +#define BPF_MEM 0x60 +#define BPF_LEN 0x80 +#define BPF_MSH 0xa0 + +/* alu/jmp fields */ +#define BPF_OP(code) ((code) & 0xf0) +#define BPF_ADD 0x00 +#define BPF_SUB 0x10 +#define BPF_MUL 0x20 +#define BPF_DIV 0x30 +#define BPF_OR 0x40 +#define BPF_AND 0x50 +#define BPF_LSH 0x60 +#define BPF_RSH 0x70 +#define BPF_NEG 0x80 +#define BPF_MOD 0x90 +#define BPF_XOR 0xa0 + +#define BPF_JA 0x00 +#define BPF_JEQ 0x10 +#define BPF_JGT 0x20 +#define BPF_JGE 0x30 +#define BPF_JSET 0x40 +#define BPF_SRC(code) ((code) & 0x08) +#define BPF_K 0x00 +#define BPF_X 0x08 + +#ifndef BPF_MAXINSNS +#define BPF_MAXINSNS 4096 +#endif + +#endif /* _UAPI__LINUX_BPF_COMMON_H__ */ diff --git a/include/uapi/linux/bsg.h b/include/uapi/linux/bsg.h index 7a12e1c0f371..02986cf8b6f1 100644 --- a/include/uapi/linux/bsg.h +++ b/include/uapi/linux/bsg.h @@ -10,12 +10,13 @@ #define BSG_SUB_PROTOCOL_SCSI_TRANSPORT 2 /* - * For flags member below - * sg.h sg_io_hdr also has bits defined for it's flags member. However - * none of these bits are implemented/used by bsg. The bits below are - * allocated to not conflict with sg.h ones anyway. + * For flag constants below: + * sg.h sg_io_hdr also has bits defined for it's flags member. These + * two flag values (0x10 and 0x20) have the same meaning in sg.h . For + * bsg the BSG_FLAG_Q_AT_HEAD flag is ignored since it is the deafult. */ -#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */ +#define BSG_FLAG_Q_AT_TAIL 0x10 /* default is Q_AT_HEAD */ +#define BSG_FLAG_Q_AT_HEAD 0x20 struct sg_io_v4 { __s32 guard; /* [i] 'Q' to differentiate from v3 */ diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h index c8a4302093a3..3315ab21f728 100644 --- a/include/uapi/linux/dm-ioctl.h +++ b/include/uapi/linux/dm-ioctl.h @@ -267,9 +267,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 27 +#define DM_VERSION_MINOR 28 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2013-10-30)" +#define DM_VERSION_EXTRA "-ioctl (2014-09-17)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ diff --git a/include/uapi/linux/elf-em.h b/include/uapi/linux/elf-em.h index 01529bd96438..aa90bc98b6e2 100644 --- a/include/uapi/linux/elf-em.h +++ b/include/uapi/linux/elf-em.h @@ -32,6 +32,7 @@ #define EM_V850 87 /* NEC v850 */ #define EM_M32R 88 /* Renesas M32R */ #define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */ +#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */ #define EM_BLACKFIN 106 /* ADI Blackfin Processor */ #define EM_TI_C6000 140 /* TI C6X DSPs */ #define EM_AARCH64 183 /* ARM 64 bit */ diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h index ef6103bf1f9b..ea9bf2561b9e 100644 --- a/include/uapi/linux/elf.h +++ b/include/uapi/linux/elf.h @@ -391,6 +391,8 @@ typedef struct elf64_shdr { #define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */ #define NT_S390_SYSTEM_CALL 0x307 /* s390 system call restart data */ #define NT_S390_TDB 0x308 /* s390 transaction diagnostic block */ +#define NT_S390_VXRS_LOW 0x309 /* s390 vector registers 0-15 upper half */ +#define NT_S390_VXRS_HIGH 0x30a /* s390 vector registers 16-31 */ #define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */ #define NT_ARM_TLS 0x401 /* ARM TLS register */ #define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */ diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index e3c7a719c76b..99b43056a6fe 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -209,6 +209,33 @@ struct ethtool_value { __u32 data; }; +enum tunable_id { + ETHTOOL_ID_UNSPEC, + ETHTOOL_RX_COPYBREAK, + ETHTOOL_TX_COPYBREAK, +}; + +enum tunable_type_id { + ETHTOOL_TUNABLE_UNSPEC, + ETHTOOL_TUNABLE_U8, + ETHTOOL_TUNABLE_U16, + ETHTOOL_TUNABLE_U32, + ETHTOOL_TUNABLE_U64, + ETHTOOL_TUNABLE_STRING, + ETHTOOL_TUNABLE_S8, + ETHTOOL_TUNABLE_S16, + ETHTOOL_TUNABLE_S32, + ETHTOOL_TUNABLE_S64, +}; + +struct ethtool_tunable { + __u32 cmd; + __u32 id; + __u32 type_id; + __u32 len; + void *data[0]; +}; + /** * struct ethtool_regs - hardware register dump * @cmd: Command number = %ETHTOOL_GREGS @@ -1152,6 +1179,8 @@ enum ethtool_sfeatures_retval_bits { #define ETHTOOL_GRSSH 0x00000046 /* Get RX flow hash configuration */ #define ETHTOOL_SRSSH 0x00000047 /* Set RX flow hash configuration */ +#define ETHTOOL_GTUNABLE 0x00000048 /* Get tunable configuration */ +#define ETHTOOL_STUNABLE 0x00000049 /* Set tunable configuration */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h index 074b886c6be0..beed138bd359 100644 --- a/include/uapi/linux/fcntl.h +++ b/include/uapi/linux/fcntl.h @@ -28,6 +28,21 @@ #define F_GETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 8) /* + * Set/Get seals + */ +#define F_ADD_SEALS (F_LINUX_SPECIFIC_BASE + 9) +#define F_GET_SEALS (F_LINUX_SPECIFIC_BASE + 10) + +/* + * Types of seals + */ +#define F_SEAL_SEAL 0x0001 /* prevent further seals from being set */ +#define F_SEAL_SHRINK 0x0002 /* prevent file from shrinking */ +#define F_SEAL_GROW 0x0004 /* prevent file from growing */ +#define F_SEAL_WRITE 0x0008 /* prevent writes */ +/* (1U << 31) is reserved for signed error codes */ + +/* * Types of directory notifications that may be requested. */ #define DN_ACCESS 0x00000001 /* File accessed */ diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h index 253b4d42cf2b..47785d5ecf17 100644 --- a/include/uapi/linux/filter.h +++ b/include/uapi/linux/filter.h @@ -7,7 +7,7 @@ #include <linux/compiler.h> #include <linux/types.h> - +#include <linux/bpf_common.h> /* * Current version of the filter code architecture. @@ -32,56 +32,6 @@ struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ struct sock_filter __user *filter; }; -/* - * Instruction classes - */ - -#define BPF_CLASS(code) ((code) & 0x07) -#define BPF_LD 0x00 -#define BPF_LDX 0x01 -#define BPF_ST 0x02 -#define BPF_STX 0x03 -#define BPF_ALU 0x04 -#define BPF_JMP 0x05 -#define BPF_RET 0x06 -#define BPF_MISC 0x07 - -/* ld/ldx fields */ -#define BPF_SIZE(code) ((code) & 0x18) -#define BPF_W 0x00 -#define BPF_H 0x08 -#define BPF_B 0x10 -#define BPF_MODE(code) ((code) & 0xe0) -#define BPF_IMM 0x00 -#define BPF_ABS 0x20 -#define BPF_IND 0x40 -#define BPF_MEM 0x60 -#define BPF_LEN 0x80 -#define BPF_MSH 0xa0 - -/* alu/jmp fields */ -#define BPF_OP(code) ((code) & 0xf0) -#define BPF_ADD 0x00 -#define BPF_SUB 0x10 -#define BPF_MUL 0x20 -#define BPF_DIV 0x30 -#define BPF_OR 0x40 -#define BPF_AND 0x50 -#define BPF_LSH 0x60 -#define BPF_RSH 0x70 -#define BPF_NEG 0x80 -#define BPF_MOD 0x90 -#define BPF_XOR 0xa0 - -#define BPF_JA 0x00 -#define BPF_JEQ 0x10 -#define BPF_JGT 0x20 -#define BPF_JGE 0x30 -#define BPF_JSET 0x40 -#define BPF_SRC(code) ((code) & 0x08) -#define BPF_K 0x00 -#define BPF_X 0x08 - /* ret - BPF_K and BPF_X also apply */ #define BPF_RVAL(code) ((code) & 0x18) #define BPF_A 0x10 @@ -91,10 +41,6 @@ struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ #define BPF_TAX 0x00 #define BPF_TXA 0x80 -#ifndef BPF_MAXINSNS -#define BPF_MAXINSNS 4096 -#endif - /* * Macros for filter block array initializers. */ diff --git a/include/uapi/linux/fou.h b/include/uapi/linux/fou.h new file mode 100644 index 000000000000..8df06894da23 --- /dev/null +++ b/include/uapi/linux/fou.h @@ -0,0 +1,39 @@ +/* fou.h - FOU Interface */ + +#ifndef _UAPI_LINUX_FOU_H +#define _UAPI_LINUX_FOU_H + +/* NETLINK_GENERIC related info + */ +#define FOU_GENL_NAME "fou" +#define FOU_GENL_VERSION 0x1 + +enum { + FOU_ATTR_UNSPEC, + FOU_ATTR_PORT, /* u16 */ + FOU_ATTR_AF, /* u8 */ + FOU_ATTR_IPPROTO, /* u8 */ + FOU_ATTR_TYPE, /* u8 */ + + __FOU_ATTR_MAX, +}; + +#define FOU_ATTR_MAX (__FOU_ATTR_MAX - 1) + +enum { + FOU_CMD_UNSPEC, + FOU_CMD_ADD, + FOU_CMD_DEL, + + __FOU_CMD_MAX, +}; + +enum { + FOU_ENCAP_UNSPEC, + FOU_ENCAP_DIRECT, + FOU_ENCAP_GUE, +}; + +#define FOU_CMD_MAX (__FOU_CMD_MAX - 1) + +#endif /* _UAPI_LINUX_FOU_H */ diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index ca1a11bb4443..3735fa0a6784 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -37,6 +37,7 @@ #define RENAME_NOREPLACE (1 << 0) /* Don't overwrite target */ #define RENAME_EXCHANGE (1 << 1) /* Exchange source and dest */ +#define RENAME_WHITEOUT (1 << 2) /* Whiteout source */ struct fstrim_range { __u64 start; diff --git a/include/uapi/linux/genwqe/genwqe_card.h b/include/uapi/linux/genwqe/genwqe_card.h index 4fc065f29255..baa93fb4cd4f 100644 --- a/include/uapi/linux/genwqe/genwqe_card.h +++ b/include/uapi/linux/genwqe/genwqe_card.h @@ -8,7 +8,7 @@ * * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> - * Author: Michael Jung <mijung@de.ibm.com> + * Author: Michael Jung <mijung@gmx.net> * Author: Michael Ruettger <michael@ibmra.de> * * This program is free software; you can redistribute it and/or modify diff --git a/include/uapi/linux/hyperv.h b/include/uapi/linux/hyperv.h index 78e4a86030dd..0a8e6badb29b 100644 --- a/include/uapi/linux/hyperv.h +++ b/include/uapi/linux/hyperv.h @@ -137,7 +137,7 @@ struct hv_do_fcopy { __u64 offset; __u32 size; __u8 data[DATA_FRAGMENT]; -}; +} __attribute__((packed)); /* * An implementation of HyperV key value pair (KVP) functionality for Linux. diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index 39f621a9fe82..da17e456908d 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -15,6 +15,7 @@ #include <linux/types.h> #include <linux/if_ether.h> +#include <linux/in6.h> #define SYSFS_BRIDGE_ATTR "bridge" #define SYSFS_BRIDGE_FDB "brforward" diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 0f8210b8e0bc..aa63ed023c2b 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -128,6 +128,7 @@ #define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */ #define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ #define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */ +#define ETH_P_XDSA 0x00F8 /* Multiplexed DSA protocol */ /* * This is an Ethernet frame header. diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index ff957604a721..0bdb77e16875 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -215,6 +215,18 @@ enum in6_addr_gen_mode { IN6_ADDR_GEN_MODE_NONE, }; +/* Bridge section */ + +enum { + IFLA_BR_UNSPEC, + IFLA_BR_FORWARD_DELAY, + IFLA_BR_HELLO_TIME, + IFLA_BR_MAX_AGE, + __IFLA_BR_MAX, +}; + +#define IFLA_BR_MAX (__IFLA_BR_MAX - 1) + enum { BRIDGE_MODE_UNSPEC, BRIDGE_MODE_HAIRPIN, @@ -291,6 +303,10 @@ enum { IFLA_MACVLAN_UNSPEC, IFLA_MACVLAN_MODE, IFLA_MACVLAN_FLAGS, + IFLA_MACVLAN_MACADDR_MODE, + IFLA_MACVLAN_MACADDR, + IFLA_MACVLAN_MACADDR_DATA, + IFLA_MACVLAN_MACADDR_COUNT, __IFLA_MACVLAN_MAX, }; @@ -301,6 +317,14 @@ enum macvlan_mode { MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */ MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */ MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */ + MACVLAN_MODE_SOURCE = 16,/* use source MAC address list to assign */ +}; + +enum macvlan_macaddr_mode { + MACVLAN_MACADDR_ADD, + MACVLAN_MACADDR_DEL, + MACVLAN_MACADDR_FLUSH, + MACVLAN_MACADDR_SET, }; #define MACVLAN_FLAG_NOPROMISC 1 diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h index 3bce9e9d9f7c..280d9e092283 100644 --- a/include/uapi/linux/if_tunnel.h +++ b/include/uapi/linux/if_tunnel.h @@ -53,10 +53,23 @@ enum { IFLA_IPTUN_6RD_RELAY_PREFIX, IFLA_IPTUN_6RD_PREFIXLEN, IFLA_IPTUN_6RD_RELAY_PREFIXLEN, + IFLA_IPTUN_ENCAP_TYPE, + IFLA_IPTUN_ENCAP_FLAGS, + IFLA_IPTUN_ENCAP_SPORT, + IFLA_IPTUN_ENCAP_DPORT, __IFLA_IPTUN_MAX, }; #define IFLA_IPTUN_MAX (__IFLA_IPTUN_MAX - 1) +enum tunnel_encap_types { + TUNNEL_ENCAP_NONE, + TUNNEL_ENCAP_FOU, + TUNNEL_ENCAP_GUE, +}; + +#define TUNNEL_ENCAP_FLAG_CSUM (1<<0) +#define TUNNEL_ENCAP_FLAG_CSUM6 (1<<1) + /* SIT-mode i_flags */ #define SIT_ISATAP 0x0001 @@ -94,6 +107,10 @@ enum { IFLA_GRE_ENCAP_LIMIT, IFLA_GRE_FLOWINFO, IFLA_GRE_FLAGS, + IFLA_GRE_ENCAP_TYPE, + IFLA_GRE_ENCAP_FLAGS, + IFLA_GRE_ENCAP_SPORT, + IFLA_GRE_ENCAP_DPORT, __IFLA_GRE_MAX, }; diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h index 22b7a69619d8..74a2a1773494 100644 --- a/include/uapi/linux/in6.h +++ b/include/uapi/linux/in6.h @@ -233,7 +233,6 @@ struct in6_flowlabel_req { #if 0 /* not yet */ #define IPV6_USE_MIN_MTU 63 #endif -#define IPV6_AUTOFLOWLABEL 64 /* * Netfilter (1) @@ -262,6 +261,7 @@ struct in6_flowlabel_req { * IP6T_SO_ORIGINAL_DST 80 */ +#define IPV6_AUTOFLOWLABEL 70 /* RFC5014: Source address selection */ #define IPV6_ADDR_PREFERENCES 72 diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h index bbde90fa5838..d65c0a09efd3 100644 --- a/include/uapi/linux/inet_diag.h +++ b/include/uapi/linux/inet_diag.h @@ -110,10 +110,10 @@ enum { INET_DIAG_TCLASS, INET_DIAG_SKMEMINFO, INET_DIAG_SHUTDOWN, + INET_DIAG_DCTCPINFO, }; -#define INET_DIAG_MAX INET_DIAG_SHUTDOWN - +#define INET_DIAG_MAX INET_DIAG_DCTCPINFO /* INET_DIAG_MEM */ @@ -133,5 +133,14 @@ struct tcpvegas_info { __u32 tcpv_minrtt; }; +/* INET_DIAG_DCTCPINFO */ + +struct tcp_dctcp_info { + __u16 dctcp_enabled; + __u16 dctcp_ce_state; + __u32 dctcp_alpha; + __u32 dctcp_ab_ecn; + __u32 dctcp_ab_tot; +}; #endif /* _UAPI_INET_DIAG_H_ */ diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h index 19df18c9b8be..a1d7e931ab72 100644 --- a/include/uapi/linux/input.h +++ b/include/uapi/linux/input.h @@ -165,6 +165,7 @@ struct input_keymap_entry { #define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ #define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ #define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */ +#define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */ #define INPUT_PROP_MAX 0x1f #define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) @@ -738,6 +739,13 @@ struct input_keymap_entry { #define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ +#define KEY_KBDINPUTASSIST_PREV 0x260 +#define KEY_KBDINPUTASSIST_NEXT 0x261 +#define KEY_KBDINPUTASSIST_PREVGROUP 0x262 +#define KEY_KBDINPUTASSIST_NEXTGROUP 0x263 +#define KEY_KBDINPUTASSIST_ACCEPT 0x264 +#define KEY_KBDINPUTASSIST_CANCEL 0x265 + #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 #define BTN_TRIGGER_HAPPY2 0x2c1 diff --git a/include/uapi/linux/ip_vs.h b/include/uapi/linux/ip_vs.h index fbcffe8041f7..cabe95d5b461 100644 --- a/include/uapi/linux/ip_vs.h +++ b/include/uapi/linux/ip_vs.h @@ -384,6 +384,9 @@ enum { IPVS_DEST_ATTR_PERSIST_CONNS, /* persistent connections */ IPVS_DEST_ATTR_STATS, /* nested attribute for dest stats */ + + IPVS_DEST_ATTR_ADDR_FAMILY, /* Address family of address */ + __IPVS_DEST_ATTR_MAX, }; diff --git a/include/uapi/linux/kernel-page-flags.h b/include/uapi/linux/kernel-page-flags.h index 5116a0e48172..2f96d233c980 100644 --- a/include/uapi/linux/kernel-page-flags.h +++ b/include/uapi/linux/kernel-page-flags.h @@ -31,6 +31,7 @@ #define KPF_KSM 21 #define KPF_THP 22 +#define KPF_BALLOON 23 #endif /* _UAPILINUX_KERNEL_PAGE_FLAGS_H */ diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h index d6629d49a243..6925f5b42f89 100644 --- a/include/uapi/linux/kexec.h +++ b/include/uapi/linux/kexec.h @@ -13,6 +13,17 @@ #define KEXEC_PRESERVE_CONTEXT 0x00000002 #define KEXEC_ARCH_MASK 0xffff0000 +/* + * Kexec file load interface flags. + * KEXEC_FILE_UNLOAD : Unload already loaded kexec/kdump image. + * KEXEC_FILE_ON_CRASH : Load/unload operation belongs to kdump image. + * KEXEC_FILE_NO_INITRAMFS : No initramfs is being loaded. Ignore the initrd + * fd field. + */ +#define KEXEC_FILE_UNLOAD 0x00000001 +#define KEXEC_FILE_ON_CRASH 0x00000002 +#define KEXEC_FILE_NO_INITRAMFS 0x00000004 + /* These values match the ELF architecture values. * Unless there is a good reason that should continue to be the case. */ diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 9b744af871d7..60768822b140 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -162,7 +162,7 @@ struct kvm_pit_config { #define KVM_EXIT_TPR_ACCESS 12 #define KVM_EXIT_S390_SIEIC 13 #define KVM_EXIT_S390_RESET 14 -#define KVM_EXIT_DCR 15 +#define KVM_EXIT_DCR 15 /* deprecated */ #define KVM_EXIT_NMI 16 #define KVM_EXIT_INTERNAL_ERROR 17 #define KVM_EXIT_OSI 18 @@ -268,7 +268,7 @@ struct kvm_run { __u64 trans_exc_code; __u32 pgm_code; } s390_ucontrol; - /* KVM_EXIT_DCR */ + /* KVM_EXIT_DCR (deprecated) */ struct { __u32 dcrn; __u32 data; @@ -654,9 +654,7 @@ struct kvm_ppc_smmu_info { #endif /* Bug in KVM_SET_USER_MEMORY_REGION fixed: */ #define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21 -#ifdef __KVM_HAVE_USER_NMI #define KVM_CAP_USER_NMI 22 -#endif #ifdef __KVM_HAVE_GUEST_DEBUG #define KVM_CAP_SET_GUEST_DEBUG 23 #endif @@ -738,9 +736,7 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_PPC_GET_SMMU_INFO 78 #define KVM_CAP_S390_COW 79 #define KVM_CAP_PPC_ALLOC_HTAB 80 -#ifdef __KVM_HAVE_READONLY_MEM #define KVM_CAP_READONLY_MEM 81 -#endif #define KVM_CAP_IRQFD_RESAMPLE 82 #define KVM_CAP_PPC_BOOKE_WATCHDOG 83 #define KVM_CAP_PPC_HTAB_FD 84 @@ -763,6 +759,8 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_VM_ATTRIBUTES 101 #define KVM_CAP_ARM_PSCI_0_2 102 #define KVM_CAP_PPC_FIXUP_HCALL 103 +#define KVM_CAP_PPC_ENABLE_HCALL 104 +#define KVM_CAP_CHECK_EXTENSION_VM 105 #ifdef KVM_CAP_IRQ_ROUTING @@ -945,15 +943,25 @@ struct kvm_device_attr { __u64 addr; /* userspace address of attr data */ }; -#define KVM_DEV_TYPE_FSL_MPIC_20 1 -#define KVM_DEV_TYPE_FSL_MPIC_42 2 -#define KVM_DEV_TYPE_XICS 3 -#define KVM_DEV_TYPE_VFIO 4 #define KVM_DEV_VFIO_GROUP 1 #define KVM_DEV_VFIO_GROUP_ADD 1 #define KVM_DEV_VFIO_GROUP_DEL 2 -#define KVM_DEV_TYPE_ARM_VGIC_V2 5 -#define KVM_DEV_TYPE_FLIC 6 + +enum kvm_device_type { + KVM_DEV_TYPE_FSL_MPIC_20 = 1, +#define KVM_DEV_TYPE_FSL_MPIC_20 KVM_DEV_TYPE_FSL_MPIC_20 + KVM_DEV_TYPE_FSL_MPIC_42, +#define KVM_DEV_TYPE_FSL_MPIC_42 KVM_DEV_TYPE_FSL_MPIC_42 + KVM_DEV_TYPE_XICS, +#define KVM_DEV_TYPE_XICS KVM_DEV_TYPE_XICS + KVM_DEV_TYPE_VFIO, +#define KVM_DEV_TYPE_VFIO KVM_DEV_TYPE_VFIO + KVM_DEV_TYPE_ARM_VGIC_V2, +#define KVM_DEV_TYPE_ARM_VGIC_V2 KVM_DEV_TYPE_ARM_VGIC_V2 + KVM_DEV_TYPE_FLIC, +#define KVM_DEV_TYPE_FLIC KVM_DEV_TYPE_FLIC + KVM_DEV_TYPE_MAX, +}; /* * ioctls for VM fds @@ -1091,7 +1099,7 @@ struct kvm_s390_ucas_mapping { #define KVM_S390_INITIAL_RESET _IO(KVMIO, 0x97) #define KVM_GET_MP_STATE _IOR(KVMIO, 0x98, struct kvm_mp_state) #define KVM_SET_MP_STATE _IOW(KVMIO, 0x99, struct kvm_mp_state) -/* Available with KVM_CAP_NMI */ +/* Available with KVM_CAP_USER_NMI */ #define KVM_NMI _IO(KVMIO, 0x9a) /* Available with KVM_CAP_SET_GUEST_DEBUG */ #define KVM_SET_GUEST_DEBUG _IOW(KVMIO, 0x9b, struct kvm_guest_debug) diff --git a/include/uapi/linux/memfd.h b/include/uapi/linux/memfd.h new file mode 100644 index 000000000000..534e364bda92 --- /dev/null +++ b/include/uapi/linux/memfd.h @@ -0,0 +1,8 @@ +#ifndef _UAPI_LINUX_MEMFD_H +#define _UAPI_LINUX_MEMFD_H + +/* flags for memfd_create(2) (unsigned int) */ +#define MFD_CLOEXEC 0x0001U +#define MFD_ALLOW_SEALING 0x0002U + +#endif /* _UAPI_LINUX_MEMFD_H */ diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h index 78c2f2e79920..ca03119111a2 100644 --- a/include/uapi/linux/netfilter/ipset/ip_set.h +++ b/include/uapi/linux/netfilter/ipset/ip_set.h @@ -115,6 +115,9 @@ enum { IPSET_ATTR_BYTES, IPSET_ATTR_PACKETS, IPSET_ATTR_COMMENT, + IPSET_ATTR_SKBMARK, + IPSET_ATTR_SKBPRIO, + IPSET_ATTR_SKBQUEUE, __IPSET_ATTR_ADT_MAX, }; #define IPSET_ATTR_ADT_MAX (__IPSET_ATTR_ADT_MAX - 1) @@ -147,6 +150,7 @@ enum ipset_errno { IPSET_ERR_COUNTER, IPSET_ERR_COMMENT, IPSET_ERR_INVALID_MARKMASK, + IPSET_ERR_SKBINFO, /* Type specific error codes */ IPSET_ERR_TYPE_SPECIFIC = 4352, @@ -170,6 +174,12 @@ enum ipset_cmd_flags { IPSET_FLAG_MATCH_COUNTERS = (1 << IPSET_FLAG_BIT_MATCH_COUNTERS), IPSET_FLAG_BIT_RETURN_NOMATCH = 7, IPSET_FLAG_RETURN_NOMATCH = (1 << IPSET_FLAG_BIT_RETURN_NOMATCH), + IPSET_FLAG_BIT_MAP_SKBMARK = 8, + IPSET_FLAG_MAP_SKBMARK = (1 << IPSET_FLAG_BIT_MAP_SKBMARK), + IPSET_FLAG_BIT_MAP_SKBPRIO = 9, + IPSET_FLAG_MAP_SKBPRIO = (1 << IPSET_FLAG_BIT_MAP_SKBPRIO), + IPSET_FLAG_BIT_MAP_SKBQUEUE = 10, + IPSET_FLAG_MAP_SKBQUEUE = (1 << IPSET_FLAG_BIT_MAP_SKBQUEUE), IPSET_FLAG_CMD_MAX = 15, }; @@ -187,6 +197,8 @@ enum ipset_cadt_flags { IPSET_FLAG_WITH_COMMENT = (1 << IPSET_FLAG_BIT_WITH_COMMENT), IPSET_FLAG_BIT_WITH_FORCEADD = 5, IPSET_FLAG_WITH_FORCEADD = (1 << IPSET_FLAG_BIT_WITH_FORCEADD), + IPSET_FLAG_BIT_WITH_SKBINFO = 6, + IPSET_FLAG_WITH_SKBINFO = (1 << IPSET_FLAG_BIT_WITH_SKBINFO), IPSET_FLAG_CADT_MAX = 15, }; diff --git a/include/uapi/linux/netfilter/nf_nat.h b/include/uapi/linux/netfilter/nf_nat.h index 1ad3659102b6..0880781ad7b6 100644 --- a/include/uapi/linux/netfilter/nf_nat.h +++ b/include/uapi/linux/netfilter/nf_nat.h @@ -13,6 +13,11 @@ #define NF_NAT_RANGE_PROTO_RANDOM_ALL \ (NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PROTO_RANDOM_FULLY) +#define NF_NAT_RANGE_MASK \ + (NF_NAT_RANGE_MAP_IPS | NF_NAT_RANGE_PROTO_SPECIFIED | \ + NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PERSISTENT | \ + NF_NAT_RANGE_PROTO_RANDOM_FULLY) + struct nf_nat_ipv4_range { unsigned int flags; __be32 min_ip; diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index 801bdd1e56e3..f31fe7b660a5 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -51,6 +51,8 @@ enum nft_verdicts { * @NFT_MSG_NEWSETELEM: create a new set element (enum nft_set_elem_attributes) * @NFT_MSG_GETSETELEM: get a set element (enum nft_set_elem_attributes) * @NFT_MSG_DELSETELEM: delete a set element (enum nft_set_elem_attributes) + * @NFT_MSG_NEWGEN: announce a new generation, only for events (enum nft_gen_attributes) + * @NFT_MSG_GETGEN: get the rule-set generation (enum nft_gen_attributes) */ enum nf_tables_msg_types { NFT_MSG_NEWTABLE, @@ -68,6 +70,8 @@ enum nf_tables_msg_types { NFT_MSG_NEWSETELEM, NFT_MSG_GETSETELEM, NFT_MSG_DELSETELEM, + NFT_MSG_NEWGEN, + NFT_MSG_GETGEN, NFT_MSG_MAX, }; @@ -571,6 +575,10 @@ enum nft_exthdr_attributes { * @NFT_META_L4PROTO: layer 4 protocol number * @NFT_META_BRI_IIFNAME: packet input bridge interface name * @NFT_META_BRI_OIFNAME: packet output bridge interface name + * @NFT_META_PKTTYPE: packet type (skb->pkt_type), special handling for loopback + * @NFT_META_CPU: cpu id through smp_processor_id() + * @NFT_META_IIFGROUP: packet input interface group + * @NFT_META_OIFGROUP: packet output interface group */ enum nft_meta_keys { NFT_META_LEN, @@ -592,6 +600,10 @@ enum nft_meta_keys { NFT_META_L4PROTO, NFT_META_BRI_IIFNAME, NFT_META_BRI_OIFNAME, + NFT_META_PKTTYPE, + NFT_META_CPU, + NFT_META_IIFGROUP, + NFT_META_OIFGROUP, }; /** @@ -737,13 +749,34 @@ enum nft_queue_attributes { * * @NFT_REJECT_ICMP_UNREACH: reject using ICMP unreachable * @NFT_REJECT_TCP_RST: reject using TCP RST + * @NFT_REJECT_ICMPX_UNREACH: abstracted ICMP unreachable for bridge and inet */ enum nft_reject_types { NFT_REJECT_ICMP_UNREACH, NFT_REJECT_TCP_RST, + NFT_REJECT_ICMPX_UNREACH, }; /** + * enum nft_reject_code - Generic reject codes for IPv4/IPv6 + * + * @NFT_REJECT_ICMPX_NO_ROUTE: no route to host / network unreachable + * @NFT_REJECT_ICMPX_PORT_UNREACH: port unreachable + * @NFT_REJECT_ICMPX_HOST_UNREACH: host unreachable + * @NFT_REJECT_ICMPX_ADMIN_PROHIBITED: administratively prohibited + * + * These codes are mapped to real ICMP and ICMPv6 codes. + */ +enum nft_reject_inet_code { + NFT_REJECT_ICMPX_NO_ROUTE = 0, + NFT_REJECT_ICMPX_PORT_UNREACH, + NFT_REJECT_ICMPX_HOST_UNREACH, + NFT_REJECT_ICMPX_ADMIN_PROHIBITED, + __NFT_REJECT_ICMPX_MAX +}; +#define NFT_REJECT_ICMPX_MAX (__NFT_REJECT_ICMPX_MAX - 1) + +/** * enum nft_reject_attributes - nf_tables reject expression netlink attributes * * @NFTA_REJECT_TYPE: packet type to use (NLA_U32: nft_reject_types) @@ -777,6 +810,7 @@ enum nft_nat_types { * @NFTA_NAT_REG_ADDR_MAX: source register of address range end (NLA_U32: nft_registers) * @NFTA_NAT_REG_PROTO_MIN: source register of proto range start (NLA_U32: nft_registers) * @NFTA_NAT_REG_PROTO_MAX: source register of proto range end (NLA_U32: nft_registers) + * @NFTA_NAT_FLAGS: NAT flags (see NF_NAT_RANGE_* in linux/netfilter/nf_nat.h) (NLA_U32) */ enum nft_nat_attributes { NFTA_NAT_UNSPEC, @@ -786,8 +820,33 @@ enum nft_nat_attributes { NFTA_NAT_REG_ADDR_MAX, NFTA_NAT_REG_PROTO_MIN, NFTA_NAT_REG_PROTO_MAX, + NFTA_NAT_FLAGS, __NFTA_NAT_MAX }; #define NFTA_NAT_MAX (__NFTA_NAT_MAX - 1) +/** + * enum nft_masq_attributes - nf_tables masquerade expression attributes + * + * @NFTA_MASQ_FLAGS: NAT flags (see NF_NAT_RANGE_* in linux/netfilter/nf_nat.h) (NLA_U32) + */ +enum nft_masq_attributes { + NFTA_MASQ_UNSPEC, + NFTA_MASQ_FLAGS, + __NFTA_MASQ_MAX +}; +#define NFTA_MASQ_MAX (__NFTA_MASQ_MAX - 1) + +/** + * enum nft_gen_attributes - nf_tables ruleset generation attributes + * + * @NFTA_GEN_ID: Ruleset generation ID (NLA_U32) + */ +enum nft_gen_attributes { + NFTA_GEN_UNSPEC, + NFTA_GEN_ID, + __NFTA_GEN_MAX +}; +#define NFTA_GEN_MAX (__NFTA_GEN_MAX - 1) + #endif /* _LINUX_NF_TABLES_H */ diff --git a/include/uapi/linux/netfilter/nfnetlink_acct.h b/include/uapi/linux/netfilter/nfnetlink_acct.h index 51404ec19022..f3e34dbbf966 100644 --- a/include/uapi/linux/netfilter/nfnetlink_acct.h +++ b/include/uapi/linux/netfilter/nfnetlink_acct.h @@ -28,9 +28,17 @@ enum nfnl_acct_type { NFACCT_USE, NFACCT_FLAGS, NFACCT_QUOTA, + NFACCT_FILTER, __NFACCT_MAX }; #define NFACCT_MAX (__NFACCT_MAX - 1) +enum nfnl_attr_filter_type { + NFACCT_FILTER_UNSPEC, + NFACCT_FILTER_MASK, + NFACCT_FILTER_VALUE, + __NFACCT_FILTER_MAX +}; +#define NFACCT_FILTER_MAX (__NFACCT_FILTER_MAX - 1) #endif /* _UAPI_NFNL_ACCT_H_ */ diff --git a/include/uapi/linux/netfilter/xt_set.h b/include/uapi/linux/netfilter/xt_set.h index 964d3d42f874..d6a1df1f2947 100644 --- a/include/uapi/linux/netfilter/xt_set.h +++ b/include/uapi/linux/netfilter/xt_set.h @@ -71,4 +71,14 @@ struct xt_set_info_match_v3 { __u32 flags; }; +/* Revision 3 target */ + +struct xt_set_info_target_v3 { + struct xt_set_info add_set; + struct xt_set_info del_set; + struct xt_set_info map_set; + __u32 flags; + __u32 timeout; +}; + #endif /*_XT_SET_H*/ diff --git a/include/uapi/linux/netfilter_arp/arpt_mangle.h b/include/uapi/linux/netfilter_arp/arpt_mangle.h index 250f502902bb..8c2b16a1f5a0 100644 --- a/include/uapi/linux/netfilter_arp/arpt_mangle.h +++ b/include/uapi/linux/netfilter_arp/arpt_mangle.h @@ -13,7 +13,7 @@ struct arpt_mangle union { struct in_addr tgt_ip; } u_t; - u_int8_t flags; + __u8 flags; int target; }; diff --git a/include/uapi/linux/nfsd/export.h b/include/uapi/linux/nfsd/export.h index cf47c313794e..584b6ef3a5e8 100644 --- a/include/uapi/linux/nfsd/export.h +++ b/include/uapi/linux/nfsd/export.h @@ -28,7 +28,8 @@ #define NFSEXP_ALLSQUASH 0x0008 #define NFSEXP_ASYNC 0x0010 #define NFSEXP_GATHERED_WRITES 0x0020 -/* 40 80 100 currently unused */ +#define NFSEXP_NOREADDIRPLUS 0x0040 +/* 80 100 currently unused */ #define NFSEXP_NOHIDE 0x0200 #define NFSEXP_NOSUBTREECHECK 0x0400 #define NFSEXP_NOAUTHNLM 0x0800 /* Don't authenticate NLM requests - just trust */ @@ -47,7 +48,7 @@ */ #define NFSEXP_V4ROOT 0x10000 /* All flags that we claim to support. (Note we don't support NOACL.) */ -#define NFSEXP_ALLFLAGS 0x17E3F +#define NFSEXP_ALLFLAGS 0x1FE7F /* The flags that may vary depending on security flavor: */ #define NFSEXP_SECINFO_FLAGS (NFSEXP_READONLY | NFSEXP_ROOTSQUASH \ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f1db15b9c041..4b28dc07bcb1 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -722,6 +722,22 @@ * QoS mapping is relevant for IP packets, it is only valid during an * association. This is cleared on disassociation and AP restart. * + * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given + * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO + * and %NL80211_ATTR_ADMITTED_TIME parameters. + * Note that the action frame handshake with the AP shall be handled by + * userspace via the normal management RX/TX framework, this only sets + * up the TX TS in the driver/device. + * If the admitted time attribute is not added then the request just checks + * if a subsequent setup could be successful, the intent is to use this to + * avoid setting up a session with the AP when local restrictions would + * make that impossible. However, the subsequent "real" setup may still + * fail even if the check was successful. + * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID + * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this + * before removing a station entry entirely, or before disassociating + * or similar, cleanup will happen in the driver/device in this case. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -893,6 +909,9 @@ enum nl80211_commands { NL80211_CMD_SET_QOS_MAP, + NL80211_CMD_ADD_TX_TS, + NL80211_CMD_DEL_TX_TS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1594,6 +1613,31 @@ enum nl80211_commands { * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is * the TDLS link initiator. * + * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection + * shall support Radio Resource Measurements (11k). This attribute can be + * used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests. + * User space applications are expected to use this flag only if the + * underlying device supports these minimal RRM features: + * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, + * %NL80211_FEATURE_QUIET, + * If this flag is used, driver must add the Power Capabilities IE to the + * association request. In addition, it must also set the RRM capability + * flag in the association request's Capability Info field. + * + * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout + * estimation algorithm (dynack). In order to activate dynack + * %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower + * drivers to indicate dynack capability. Dynack is automatically disabled + * setting valid value for coverage class. + * + * @NL80211_ATTR_TSID: a TSID value (u8 attribute) + * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute) + * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds + * (per second) (u16 attribute) + * + * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see + * &enum nl80211_smps_mode. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1936,6 +1980,16 @@ enum nl80211_attrs { NL80211_ATTR_TDLS_INITIATOR, + NL80211_ATTR_USE_RRM, + + NL80211_ATTR_WIPHY_DYN_ACK, + + NL80211_ATTR_TSID, + NL80211_ATTR_USER_PRIO, + NL80211_ATTR_ADMITTED_TIME, + + NL80211_ATTR_SMPS_MODE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3055,14 +3109,20 @@ enum nl80211_bss_scan_width { * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) + * (if @NL80211_BSS_PRESP_DATA is present then this is known to be + * from a probe response, otherwise it may be from the same beacon + * that the NL80211_BSS_BEACON_TSF will be from) * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the * raw information elements from the probe response/beacon (bin); - * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are - * from a Probe Response frame; otherwise they are from a Beacon frame. + * if the %NL80211_BSS_BEACON_IES attribute is present and the data is + * different then the IEs here are from a Probe Response frame; otherwise + * they are from a Beacon frame. * However, if the driver does not indicate the source of the IEs, these * IEs may be from either frame subtype. + * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the + * data here is known to be from a probe response, without any heuristics. * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon * in mBm (100 * dBm) (s32) * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon @@ -3074,6 +3134,10 @@ enum nl80211_bss_scan_width { * yet been received * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel * (u32, enum nl80211_bss_scan_width) + * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64) + * (not present if no beacon frame has been received yet) + * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and + * @NL80211_BSS_TSF is known to be from a probe response (flag attribute) * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -3091,6 +3155,8 @@ enum nl80211_bss { NL80211_BSS_SEEN_MS_AGO, NL80211_BSS_BEACON_IES, NL80211_BSS_CHAN_WIDTH, + NL80211_BSS_BEACON_TSF, + NL80211_BSS_PRESP_DATA, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -3956,6 +4022,26 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the * lifetime of a BSS. + * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter + * Set IE to probe requests. + * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE + * to probe requests. + * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period + * requests sent to it by an AP. + * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the + * current tx power value into the TPC Report IE in the spectrum + * management TPC Report action frame, and in the Radio Measurement Link + * Measurement Report action frame. + * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout + * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used + * to enable dynack. + * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial + * multiplexing powersave, ie. can turn off all but one chain + * even on HT connections that should be using more chains. + * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial + * multiplexing powersave, ie. can turn off all but one chain + * and then wake the rest up as required after, for example, + * rts/cts handshake. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3977,6 +4063,13 @@ enum nl80211_feature_flags { NL80211_FEATURE_USERSPACE_MPM = 1 << 16, NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, + NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19, + NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20, + NL80211_FEATURE_QUIET = 1 << 21, + NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22, + NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, + NL80211_FEATURE_STATIC_SMPS = 1 << 24, + NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, }; /** @@ -4051,6 +4144,25 @@ enum nl80211_acl_policy { }; /** + * enum nl80211_smps_mode - SMPS mode + * + * Requested SMPS mode (for AP mode) + * + * @NL80211_SMPS_OFF: SMPS off (use all antennas). + * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) + * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and + * turn on other antennas after CTS/RTS). + */ +enum nl80211_smps_mode { + NL80211_SMPS_OFF, + NL80211_SMPS_STATIC, + NL80211_SMPS_DYNAMIC, + + __NL80211_SMPS_AFTER_LAST, + NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1 +}; + +/** * enum nl80211_radar_event - type of radar event for DFS operation * * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h index a794d1dd7b40..435eabc5ffaa 100644 --- a/include/uapi/linux/openvswitch.h +++ b/include/uapi/linux/openvswitch.h @@ -192,6 +192,7 @@ enum ovs_vport_type { OVS_VPORT_TYPE_INTERNAL, /* network device implemented by datapath */ OVS_VPORT_TYPE_GRE, /* GRE tunnel. */ OVS_VPORT_TYPE_VXLAN, /* VXLAN tunnel. */ + OVS_VPORT_TYPE_GENEVE, /* Geneve tunnel. */ __OVS_VPORT_TYPE_MAX }; @@ -289,9 +290,12 @@ enum ovs_key_attr { OVS_KEY_ATTR_TUNNEL, /* Nested set of ovs_tunnel attributes */ OVS_KEY_ATTR_SCTP, /* struct ovs_key_sctp */ OVS_KEY_ATTR_TCP_FLAGS, /* be16 TCP flags. */ + OVS_KEY_ATTR_DP_HASH, /* u32 hash value. Value 0 indicates the hash + is not computed by the datapath. */ + OVS_KEY_ATTR_RECIRC_ID, /* u32 recirc id */ #ifdef __KERNEL__ - OVS_KEY_ATTR_IPV4_TUNNEL, /* struct ovs_key_ipv4_tunnel */ + OVS_KEY_ATTR_TUNNEL_INFO, /* struct ovs_tunnel_info */ #endif __OVS_KEY_ATTR_MAX }; @@ -306,6 +310,8 @@ enum ovs_tunnel_key_attr { OVS_TUNNEL_KEY_ATTR_TTL, /* u8 Tunnel IP TTL. */ OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT, /* No argument, set DF. */ OVS_TUNNEL_KEY_ATTR_CSUM, /* No argument. CSUM packet. */ + OVS_TUNNEL_KEY_ATTR_OAM, /* No argument. OAM frame. */ + OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS, /* Array of Geneve options. */ __OVS_TUNNEL_KEY_ATTR_MAX }; @@ -493,6 +499,27 @@ struct ovs_action_push_vlan { __be16 vlan_tci; /* 802.1Q TCI (VLAN ID and priority). */ }; +/* Data path hash algorithm for computing Datapath hash. + * + * The algorithm type only specifies the fields in a flow + * will be used as part of the hash. Each datapath is free + * to use its own hash algorithm. The hash value will be + * opaque to the user space daemon. + */ +enum ovs_hash_alg { + OVS_HASH_ALG_L4, +}; + +/* + * struct ovs_action_hash - %OVS_ACTION_ATTR_HASH action argument. + * @hash_alg: Algorithm used to compute hash prior to recirculation. + * @hash_basis: basis used for computing hash. + */ +struct ovs_action_hash { + uint32_t hash_alg; /* One of ovs_hash_alg. */ + uint32_t hash_basis; +}; + /** * enum ovs_action_attr - Action types. * @@ -521,6 +548,8 @@ enum ovs_action_attr { OVS_ACTION_ATTR_PUSH_VLAN, /* struct ovs_action_push_vlan. */ OVS_ACTION_ATTR_POP_VLAN, /* No argument. */ OVS_ACTION_ATTR_SAMPLE, /* Nested OVS_SAMPLE_ATTR_*. */ + OVS_ACTION_ATTR_RECIRC, /* u32 recirc_id. */ + OVS_ACTION_ATTR_HASH, /* struct ovs_action_hash. */ __OVS_ACTION_ATTR_MAX }; diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 30db069bce62..4a1d0cc38ff2 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -552,6 +552,7 @@ #define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */ #define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */ #define PCI_EXP_RTCAP 30 /* Root Capabilities */ +#define PCI_EXP_RTCAP_CRSVIS 0x0001 /* CRS Software Visibility capability */ #define PCI_EXP_RTSTA 32 /* Root Status */ #define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */ #define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */ @@ -630,7 +631,7 @@ /* Advanced Error Reporting */ #define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ -#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ +#define PCI_ERR_UNC_UND 0x00000001 /* Undefined */ #define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ #define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */ #define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index 9269de254874..9d845404d875 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -364,7 +364,7 @@ struct perf_event_mmap_page { /* * Bits needed to read the hw events in user-space. * - * u32 seq, time_mult, time_shift, idx, width; + * u32 seq, time_mult, time_shift, index, width; * u64 count, enabled, running; * u64 cyc, time_offset; * s64 pmc = 0; @@ -383,11 +383,11 @@ struct perf_event_mmap_page { * time_shift = pc->time_shift; * } * - * idx = pc->index; + * index = pc->index; * count = pc->offset; - * if (pc->cap_usr_rdpmc && idx) { + * if (pc->cap_user_rdpmc && index) { * width = pc->pmc_width; - * pmc = rdpmc(idx - 1); + * pmc = rdpmc(index - 1); * } * * barrier(); @@ -415,7 +415,7 @@ struct perf_event_mmap_page { }; /* - * If cap_usr_rdpmc this field provides the bit-width of the value + * If cap_user_rdpmc this field provides the bit-width of the value * read using the rdpmc() or equivalent instruction. This can be used * to sign extend the result like: * @@ -439,10 +439,10 @@ struct perf_event_mmap_page { * * Where time_offset,time_mult,time_shift and cyc are read in the * seqcount loop described above. This delta can then be added to - * enabled and possible running (if idx), improving the scaling: + * enabled and possible running (if index), improving the scaling: * * enabled += delta; - * if (idx) + * if (index) * running += delta; * * quot = count / running; diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h index 58afc04c107e..513df75d0fc9 100644 --- a/include/uapi/linux/prctl.h +++ b/include/uapi/linux/prctl.h @@ -1,6 +1,8 @@ #ifndef _LINUX_PRCTL_H #define _LINUX_PRCTL_H +#include <linux/types.h> + /* Values to pass as first argument to prctl() */ #define PR_SET_PDEATHSIG 1 /* Second arg is a signal */ @@ -119,6 +121,31 @@ # define PR_SET_MM_ENV_END 11 # define PR_SET_MM_AUXV 12 # define PR_SET_MM_EXE_FILE 13 +# define PR_SET_MM_MAP 14 +# define PR_SET_MM_MAP_SIZE 15 + +/* + * This structure provides new memory descriptor + * map which mostly modifies /proc/pid/stat[m] + * output for a task. This mostly done in a + * sake of checkpoint/restore functionality. + */ +struct prctl_mm_map { + __u64 start_code; /* code section bounds */ + __u64 end_code; + __u64 start_data; /* data section bounds */ + __u64 end_data; + __u64 start_brk; /* heap for brk() syscall */ + __u64 brk; + __u64 start_stack; /* stack starts at */ + __u64 arg_start; /* command line arguments bounds */ + __u64 arg_end; + __u64 env_start; /* environment variables bounds */ + __u64 env_end; + __u64 *auxv; /* auxiliary vector */ + __u32 auxv_size; /* vector size */ + __u32 exe_fd; /* /proc/$pid/exe link file */ +}; /* * Set specific pid that is allowed to ptrace the current task. diff --git a/include/uapi/linux/raid/md_u.h b/include/uapi/linux/raid/md_u.h index 4133e744e4e6..74e7c60c4716 100644 --- a/include/uapi/linux/raid/md_u.h +++ b/include/uapi/linux/raid/md_u.h @@ -39,7 +39,6 @@ #define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t) #define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t) #define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t) -#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13) #define RAID_AUTORUN _IO (MD_MAJOR, 0x14) #define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t) diff --git a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h index 34f9d7387d13..b932be9f5c5b 100644 --- a/include/uapi/linux/sched.h +++ b/include/uapi/linux/sched.h @@ -13,7 +13,7 @@ #define CLONE_VFORK 0x00004000 /* set if the parent wants the child to wake it up on mm_release */ #define CLONE_PARENT 0x00008000 /* set if we want to have the same parent as the cloner */ #define CLONE_THREAD 0x00010000 /* Same thread group? */ -#define CLONE_NEWNS 0x00020000 /* New namespace group? */ +#define CLONE_NEWNS 0x00020000 /* New mount namespace group */ #define CLONE_SYSVSEM 0x00040000 /* share system V SEM_UNDO semantics */ #define CLONE_SETTLS 0x00080000 /* create a new TLS for the child */ #define CLONE_PARENT_SETTID 0x00100000 /* set the TID in the parent */ diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 5820269aa132..16ad8521af6a 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -244,4 +244,7 @@ /* SC16IS74xx */ #define PORT_SC16IS7XX 108 +/* MESON */ +#define PORT_MESON 109 + #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/serio.h b/include/uapi/linux/serio.h index 9f53fa7fc132..becdd78295cc 100644 --- a/include/uapi/linux/serio.h +++ b/include/uapi/linux/serio.h @@ -76,5 +76,6 @@ #define SERIO_HAMPSHIRE 0x3b #define SERIO_PS2MULT 0x3c #define SERIO_TSC40 0x3d +#define SERIO_WACOM_IV 0x3e #endif /* _UAPI_SERIO_H */ diff --git a/include/uapi/linux/smiapp.h b/include/uapi/linux/smiapp.h new file mode 100644 index 000000000000..53938f4412ee --- /dev/null +++ b/include/uapi/linux/smiapp.h @@ -0,0 +1,29 @@ +/* + * include/uapi/linux/smiapp.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2014 Intel Corporation + * Contact: Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#ifndef __UAPI_LINUX_SMIAPP_H_ +#define __UAPI_LINUX_SMIAPP_H_ + +#define V4L2_SMIAPP_TEST_PATTERN_MODE_DISABLED 0 +#define V4L2_SMIAPP_TEST_PATTERN_MODE_SOLID_COLOUR 1 +#define V4L2_SMIAPP_TEST_PATTERN_MODE_COLOUR_BARS 2 +#define V4L2_SMIAPP_TEST_PATTERN_MODE_COLOUR_BARS_GREY 3 +#define V4L2_SMIAPP_TEST_PATTERN_MODE_PN9 4 + +#endif /* __UAPI_LINUX_SMIAPP_H_ */ diff --git a/include/uapi/linux/target_core_user.h b/include/uapi/linux/target_core_user.h new file mode 100644 index 000000000000..7dcfbe6771b1 --- /dev/null +++ b/include/uapi/linux/target_core_user.h @@ -0,0 +1,142 @@ +#ifndef __TARGET_CORE_USER_H +#define __TARGET_CORE_USER_H + +/* This header will be used by application too */ + +#include <linux/types.h> +#include <linux/uio.h> + +#ifndef __packed +#define __packed __attribute__((packed)) +#endif + +#define TCMU_VERSION "1.0" + +/* + * Ring Design + * ----------- + * + * The mmaped area is divided into three parts: + * 1) The mailbox (struct tcmu_mailbox, below) + * 2) The command ring + * 3) Everything beyond the command ring (data) + * + * The mailbox tells userspace the offset of the command ring from the + * start of the shared memory region, and how big the command ring is. + * + * The kernel passes SCSI commands to userspace by putting a struct + * tcmu_cmd_entry in the ring, updating mailbox->cmd_head, and poking + * userspace via uio's interrupt mechanism. + * + * tcmu_cmd_entry contains a header. If the header type is PAD, + * userspace should skip hdr->length bytes (mod cmdr_size) to find the + * next cmd_entry. + * + * Otherwise, the entry will contain offsets into the mmaped area that + * contain the cdb and data buffers -- the latter accessible via the + * iov array. iov addresses are also offsets into the shared area. + * + * When userspace is completed handling the command, set + * entry->rsp.scsi_status, fill in rsp.sense_buffer if appropriate, + * and also set mailbox->cmd_tail equal to the old cmd_tail plus + * hdr->length, mod cmdr_size. If cmd_tail doesn't equal cmd_head, it + * should process the next packet the same way, and so on. + */ + +#define TCMU_MAILBOX_VERSION 1 +#define ALIGN_SIZE 64 /* Should be enough for most CPUs */ + +struct tcmu_mailbox { + __u16 version; + __u16 flags; + __u32 cmdr_off; + __u32 cmdr_size; + + __u32 cmd_head; + + /* Updated by user. On its own cacheline */ + __u32 cmd_tail __attribute__((__aligned__(ALIGN_SIZE))); + +} __packed; + +enum tcmu_opcode { + TCMU_OP_PAD = 0, + TCMU_OP_CMD, +}; + +/* + * Only a few opcodes, and length is 8-byte aligned, so use low bits for opcode. + */ +struct tcmu_cmd_entry_hdr { + __u32 len_op; +} __packed; + +#define TCMU_OP_MASK 0x7 + +static inline enum tcmu_opcode tcmu_hdr_get_op(struct tcmu_cmd_entry_hdr *hdr) +{ + return hdr->len_op & TCMU_OP_MASK; +} + +static inline void tcmu_hdr_set_op(struct tcmu_cmd_entry_hdr *hdr, enum tcmu_opcode op) +{ + hdr->len_op &= ~TCMU_OP_MASK; + hdr->len_op |= (op & TCMU_OP_MASK); +} + +static inline __u32 tcmu_hdr_get_len(struct tcmu_cmd_entry_hdr *hdr) +{ + return hdr->len_op & ~TCMU_OP_MASK; +} + +static inline void tcmu_hdr_set_len(struct tcmu_cmd_entry_hdr *hdr, __u32 len) +{ + hdr->len_op &= TCMU_OP_MASK; + hdr->len_op |= len; +} + +/* Currently the same as SCSI_SENSE_BUFFERSIZE */ +#define TCMU_SENSE_BUFFERSIZE 96 + +struct tcmu_cmd_entry { + struct tcmu_cmd_entry_hdr hdr; + + uint16_t cmd_id; + uint16_t __pad1; + + union { + struct { + uint64_t cdb_off; + uint64_t iov_cnt; + struct iovec iov[0]; + } req; + struct { + uint8_t scsi_status; + uint8_t __pad1; + uint16_t __pad2; + uint32_t __pad3; + char sense_buffer[TCMU_SENSE_BUFFERSIZE]; + } rsp; + }; + +} __packed; + +#define TCMU_OP_ALIGN_SIZE sizeof(uint64_t) + +enum tcmu_genl_cmd { + TCMU_CMD_UNSPEC, + TCMU_CMD_ADDED_DEVICE, + TCMU_CMD_REMOVED_DEVICE, + __TCMU_CMD_MAX, +}; +#define TCMU_CMD_MAX (__TCMU_CMD_MAX - 1) + +enum tcmu_genl_attr { + TCMU_ATTR_UNSPEC, + TCMU_ATTR_DEVICE, + TCMU_ATTR_MINOR, + __TCMU_ATTR_MAX, +}; +#define TCMU_ATTR_MAX (__TCMU_ATTR_MAX - 1) + +#endif diff --git a/include/uapi/linux/uhid.h b/include/uapi/linux/uhid.h index 1e3b09c191cd..aaa86d6bd1dd 100644 --- a/include/uapi/linux/uhid.h +++ b/include/uapi/linux/uhid.h @@ -24,35 +24,23 @@ #include <linux/hid.h> enum uhid_event_type { - UHID_CREATE, + __UHID_LEGACY_CREATE, UHID_DESTROY, UHID_START, UHID_STOP, UHID_OPEN, UHID_CLOSE, UHID_OUTPUT, - UHID_OUTPUT_EV, /* obsolete! */ - UHID_INPUT, - UHID_FEATURE, - UHID_FEATURE_ANSWER, + __UHID_LEGACY_OUTPUT_EV, + __UHID_LEGACY_INPUT, + UHID_GET_REPORT, + UHID_GET_REPORT_REPLY, UHID_CREATE2, UHID_INPUT2, + UHID_SET_REPORT, + UHID_SET_REPORT_REPLY, }; -struct uhid_create_req { - __u8 name[128]; - __u8 phys[64]; - __u8 uniq[64]; - __u8 __user *rd_data; - __u16 rd_size; - - __u16 bus; - __u32 vendor; - __u32 product; - __u32 version; - __u32 country; -} __attribute__((__packed__)); - struct uhid_create2_req { __u8 name[128]; __u8 phys[64]; @@ -66,6 +54,16 @@ struct uhid_create2_req { __u8 rd_data[HID_MAX_DESCRIPTOR_SIZE]; } __attribute__((__packed__)); +enum uhid_dev_flag { + UHID_DEV_NUMBERED_FEATURE_REPORTS = (1ULL << 0), + UHID_DEV_NUMBERED_OUTPUT_REPORTS = (1ULL << 1), + UHID_DEV_NUMBERED_INPUT_REPORTS = (1ULL << 2), +}; + +struct uhid_start_req { + __u64 dev_flags; +}; + #define UHID_DATA_MAX 4096 enum uhid_report_type { @@ -74,36 +72,94 @@ enum uhid_report_type { UHID_INPUT_REPORT, }; -struct uhid_input_req { +struct uhid_input2_req { + __u16 size; + __u8 data[UHID_DATA_MAX]; +} __attribute__((__packed__)); + +struct uhid_output_req { __u8 data[UHID_DATA_MAX]; __u16 size; + __u8 rtype; } __attribute__((__packed__)); -struct uhid_input2_req { +struct uhid_get_report_req { + __u32 id; + __u8 rnum; + __u8 rtype; +} __attribute__((__packed__)); + +struct uhid_get_report_reply_req { + __u32 id; + __u16 err; __u16 size; __u8 data[UHID_DATA_MAX]; } __attribute__((__packed__)); -struct uhid_output_req { +struct uhid_set_report_req { + __u32 id; + __u8 rnum; + __u8 rtype; + __u16 size; + __u8 data[UHID_DATA_MAX]; +} __attribute__((__packed__)); + +struct uhid_set_report_reply_req { + __u32 id; + __u16 err; +} __attribute__((__packed__)); + +/* + * Compat Layer + * All these commands and requests are obsolete. You should avoid using them in + * new code. We support them for backwards-compatibility, but you might not get + * access to new feature in case you use them. + */ + +enum uhid_legacy_event_type { + UHID_CREATE = __UHID_LEGACY_CREATE, + UHID_OUTPUT_EV = __UHID_LEGACY_OUTPUT_EV, + UHID_INPUT = __UHID_LEGACY_INPUT, + UHID_FEATURE = UHID_GET_REPORT, + UHID_FEATURE_ANSWER = UHID_GET_REPORT_REPLY, +}; + +/* Obsolete! Use UHID_CREATE2. */ +struct uhid_create_req { + __u8 name[128]; + __u8 phys[64]; + __u8 uniq[64]; + __u8 __user *rd_data; + __u16 rd_size; + + __u16 bus; + __u32 vendor; + __u32 product; + __u32 version; + __u32 country; +} __attribute__((__packed__)); + +/* Obsolete! Use UHID_INPUT2. */ +struct uhid_input_req { __u8 data[UHID_DATA_MAX]; __u16 size; - __u8 rtype; } __attribute__((__packed__)); -/* Obsolete! Newer kernels will no longer send these events but instead convert - * it into raw output reports via UHID_OUTPUT. */ +/* Obsolete! Kernel uses UHID_OUTPUT exclusively now. */ struct uhid_output_ev_req { __u16 type; __u16 code; __s32 value; } __attribute__((__packed__)); +/* Obsolete! Kernel uses ABI compatible UHID_GET_REPORT. */ struct uhid_feature_req { __u32 id; __u8 rnum; __u8 rtype; } __attribute__((__packed__)); +/* Obsolete! Use ABI compatible UHID_GET_REPORT_REPLY. */ struct uhid_feature_answer_req { __u32 id; __u16 err; @@ -111,6 +167,15 @@ struct uhid_feature_answer_req { __u8 data[UHID_DATA_MAX]; } __attribute__((__packed__)); +/* + * UHID Events + * All UHID events from and to the kernel are encoded as "struct uhid_event". + * The "type" field contains a UHID_* type identifier. All payload depends on + * that type and can be accessed via ev->u.XYZ accordingly. + * If user-space writes short events, they're extended with 0s by the kernel. If + * the kernel writes short events, user-space shall extend them with 0s. + */ + struct uhid_event { __u32 type; @@ -120,9 +185,14 @@ struct uhid_event { struct uhid_output_req output; struct uhid_output_ev_req output_ev; struct uhid_feature_req feature; + struct uhid_get_report_req get_report; struct uhid_feature_answer_req feature_answer; + struct uhid_get_report_reply_req get_report_reply; struct uhid_create2_req create2; struct uhid_input2_req input2; + struct uhid_set_report_req set_report; + struct uhid_set_report_reply_req set_report_reply; + struct uhid_start_req start; } u; } __attribute__((__packed__)); diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h index 0389b489bbba..baeab83deb64 100644 --- a/include/uapi/linux/uinput.h +++ b/include/uapi/linux/uinput.h @@ -84,6 +84,15 @@ struct uinput_ff_erase { */ #define UI_GET_SYSNAME(len) _IOC(_IOC_READ, UINPUT_IOCTL_BASE, 300, len) +/** + * UI_GET_VERSION - Return version of uinput protocol + * + * This writes uinput protocol version implemented by the kernel into + * the integer pointed to by the ioctl argument. The protocol version + * is hard-coded in the kernel and is independent of the uinput device. + */ +#define UI_GET_VERSION _IOR(UINPUT_IOCTL_BASE, 301, unsigned int) + /* * To write a force-feedback-capable driver, the upload_effect * and erase_effect callbacks in input_dev must be implemented. diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h index 0154b2859fd7..295ba299e7bd 100644 --- a/include/uapi/linux/usb/functionfs.h +++ b/include/uapi/linux/usb/functionfs.h @@ -19,6 +19,7 @@ enum functionfs_flags { FUNCTIONFS_HAS_HS_DESC = 2, FUNCTIONFS_HAS_SS_DESC = 4, FUNCTIONFS_HAS_MS_OS_DESC = 8, + FUNCTIONFS_VIRTUAL_ADDR = 16, }; /* Descriptor of an non-audio endpoint */ @@ -32,6 +33,16 @@ struct usb_endpoint_descriptor_no_audio { __u8 bInterval; } __attribute__((packed)); +struct usb_functionfs_descs_head_v2 { + __le32 magic; + __le32 length; + __le32 flags; + /* + * __le32 fs_count, hs_count, fs_count; must be included manually in + * the structure taking flags into consideration. + */ +} __attribute__((packed)); + /* Legacy format, deprecated as of 3.14. */ struct usb_functionfs_descs_head { __le32 magic; @@ -92,7 +103,7 @@ struct usb_ext_prop_desc { * structure. Any flags that are not recognised cause the whole block to be * rejected with -ENOSYS. * - * Legacy descriptors format: + * Legacy descriptors format (deprecated as of 3.14): * * | off | name | type | description | * |-----+-----------+--------------+--------------------------------------| @@ -265,6 +276,12 @@ struct usb_functionfs_event { */ #define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129) +/* + * Returns endpoint descriptor. If function is not active returns -ENODEV. + */ +#define FUNCTIONFS_ENDPOINT_DESC _IOR('g', 130, \ + struct usb_endpoint_descriptor) + #endif /* _UAPI__LINUX_FUNCTIONFS_H__ */ diff --git a/include/uapi/linux/usbip.h b/include/uapi/linux/usbip.h new file mode 100644 index 000000000000..fa5db30ede36 --- /dev/null +++ b/include/uapi/linux/usbip.h @@ -0,0 +1,26 @@ +/* + * usbip.h + * + * USBIP uapi defines and function prototypes etc. +*/ + +#ifndef _UAPI_LINUX_USBIP_H +#define _UAPI_LINUX_USBIP_H + +/* usbip device status - exported in usbip device sysfs status */ +enum usbip_device_status { + /* sdev is available. */ + SDEV_ST_AVAILABLE = 0x01, + /* sdev is now used. */ + SDEV_ST_USED, + /* sdev is unusable because of a fatal error. */ + SDEV_ST_ERROR, + + /* vdev does not connect a remote device. */ + VDEV_ST_NULL, + /* vdev is used, but the USB address is not assigned yet */ + VDEV_ST_NOTASSIGNED, + VDEV_ST_USED, + VDEV_ST_ERROR +}; +#endif /* _UAPI_LINUX_USBIP_H */ diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index e946e43fb8d5..661f119a51b8 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -746,6 +746,8 @@ enum v4l2_auto_focus_range { V4L2_AUTO_FOCUS_RANGE_INFINITY = 3, }; +#define V4L2_CID_PAN_SPEED (V4L2_CID_CAMERA_CLASS_BASE+32) +#define V4L2_CID_TILT_SPEED (V4L2_CID_CAMERA_CLASS_BASE+33) /* FM Modulator class control IDs */ @@ -865,6 +867,10 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_CID_VBLANK (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 1) #define V4L2_CID_HBLANK (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 2) #define V4L2_CID_ANALOGUE_GAIN (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 3) +#define V4L2_CID_TEST_PATTERN_RED (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 4) +#define V4L2_CID_TEST_PATTERN_GREENR (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 5) +#define V4L2_CID_TEST_PATTERN_BLUE (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 6) +#define V4L2_CID_TEST_PATTERN_GREENB (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 7) /* Image processing controls */ diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index cb9023d4f063..29715d27548f 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -30,6 +30,12 @@ */ #define VFIO_DMA_CC_IOMMU 4 +/* Check if EEH is supported */ +#define VFIO_EEH 5 + +/* Two-stage IOMMU */ +#define VFIO_TYPE1_NESTING_IOMMU 6 /* Implies v2 */ + /* * The IOCTL interface is designed for extensibility by embedding the * structure length (argsz) and flags into structures passed between @@ -455,6 +461,37 @@ struct vfio_iommu_spapr_tce_info { #define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) +/* + * EEH PE operation struct provides ways to: + * - enable/disable EEH functionality; + * - unfreeze IO/DMA for frozen PE; + * - read PE state; + * - reset PE; + * - configure PE. + */ +struct vfio_eeh_pe_op { + __u32 argsz; + __u32 flags; + __u32 op; +}; + +#define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */ +#define VFIO_EEH_PE_ENABLE 1 /* Enable EEH functionality */ +#define VFIO_EEH_PE_UNFREEZE_IO 2 /* Enable IO for frozen PE */ +#define VFIO_EEH_PE_UNFREEZE_DMA 3 /* Enable DMA for frozen PE */ +#define VFIO_EEH_PE_GET_STATE 4 /* PE state retrieval */ +#define VFIO_EEH_PE_STATE_NORMAL 0 /* PE in functional state */ +#define VFIO_EEH_PE_STATE_RESET 1 /* PE reset in progress */ +#define VFIO_EEH_PE_STATE_STOPPED 2 /* Stopped DMA and IO */ +#define VFIO_EEH_PE_STATE_STOPPED_DMA 4 /* Stopped DMA only */ +#define VFIO_EEH_PE_STATE_UNAVAIL 5 /* State unavailable */ +#define VFIO_EEH_PE_RESET_DEACTIVATE 5 /* Deassert PE reset */ +#define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset */ +#define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental reset */ +#define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration */ + +#define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21) + /* ***************************************************************** */ #endif /* _UAPIVFIO_H */ diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 778a3298fb34..1c2f84fd4d99 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -79,6 +79,7 @@ /* Four-character-code (FOURCC) */ #define v4l2_fourcc(a, b, c, d)\ ((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24)) +#define v4l2_fourcc_be(a, b, c, d) (v4l2_fourcc(a, b, c, d) | (1 << 31)) /* * E N U M S @@ -307,6 +308,8 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_XRGB555 v4l2_fourcc('X', 'R', '1', '5') /* 16 XRGB-1-5-5-5 */ #define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */ #define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */ +#define V4L2_PIX_FMT_ARGB555X v4l2_fourcc_be('A', 'R', '1', '5') /* 16 ARGB-5-5-5 BE */ +#define V4L2_PIX_FMT_XRGB555X v4l2_fourcc_be('X', 'R', '1', '5') /* 16 XRGB-5-5-5 BE */ #define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */ #define V4L2_PIX_FMT_BGR666 v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */ #define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */ @@ -1285,11 +1288,11 @@ struct v4l2_ext_control { union { __s32 value; __s64 value64; - char *string; - __u8 *p_u8; - __u16 *p_u16; - __u32 *p_u32; - void *ptr; + char __user *string; + __u8 __user *p_u8; + __u16 __user *p_u16; + __u32 __user *p_u32; + void __user *ptr; }; } __attribute__ ((packed)); diff --git a/include/uapi/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h index 6d8e61c48563..9ad67b267584 100644 --- a/include/uapi/linux/virtio_blk.h +++ b/include/uapi/linux/virtio_blk.h @@ -40,6 +40,7 @@ #define VIRTIO_BLK_F_WCE 9 /* Writeback mode enabled after reset */ #define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */ #define VIRTIO_BLK_F_CONFIG_WCE 11 /* Writeback mode available in config */ +#define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ #ifndef __KERNEL__ /* Old (deprecated) name for VIRTIO_BLK_F_WCE. */ @@ -77,6 +78,10 @@ struct virtio_blk_config { /* writeback mode (if VIRTIO_BLK_F_CONFIG_WCE) */ __u8 wce; + __u8 unused; + + /* number of vqs, only available when VIRTIO_BLK_F_MQ is set */ + __u16 num_queues; } __attribute__((packed)); /* diff --git a/include/uapi/linux/wil6210_uapi.h b/include/uapi/linux/wil6210_uapi.h new file mode 100644 index 000000000000..6a3cddd156c4 --- /dev/null +++ b/include/uapi/linux/wil6210_uapi.h @@ -0,0 +1,87 @@ +/* + * Copyright (c) 2014 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __WIL6210_UAPI_H__ +#define __WIL6210_UAPI_H__ + +#if !defined(__KERNEL__) +#define __user +#endif + +#include <linux/sockios.h> + +/* Numbers SIOCDEVPRIVATE and SIOCDEVPRIVATE + 1 + * are used by Android devices to implement PNO (preferred network offload). + * Albeit it is temporary solution, use different numbers to avoid conflicts + */ + +/** + * Perform 32-bit I/O operation to the card memory + * + * User code should arrange data in memory like this: + * + * struct wil_memio io; + * struct ifreq ifr = { + * .ifr_data = &io, + * }; + */ +#define WIL_IOCTL_MEMIO (SIOCDEVPRIVATE + 2) + +/** + * Perform block I/O operation to the card memory + * + * User code should arrange data in memory like this: + * + * void *buf; + * struct wil_memio_block io = { + * .block = buf, + * }; + * struct ifreq ifr = { + * .ifr_data = &io, + * }; + */ +#define WIL_IOCTL_MEMIO_BLOCK (SIOCDEVPRIVATE + 3) + +/** + * operation to perform + * + * @wil_mmio_op_mask - bits defining operation, + * @wil_mmio_addr_mask - bits defining addressing mode + */ +enum wil_memio_op { + wil_mmio_read = 0, + wil_mmio_write = 1, + wil_mmio_op_mask = 0xff, + wil_mmio_addr_linker = 0 << 8, + wil_mmio_addr_ahb = 1 << 8, + wil_mmio_addr_bar = 2 << 8, + wil_mmio_addr_mask = 0xff00, +}; + +struct wil_memio { + uint32_t op; /* enum wil_memio_op */ + uint32_t addr; /* should be 32-bit aligned */ + uint32_t val; +}; + +struct wil_memio_block { + uint32_t op; /* enum wil_memio_op */ + uint32_t addr; /* should be 32-bit aligned */ + uint32_t size; /* should be multiple of 4 */ + void __user *block; /* block address */ +}; + +#endif /* __WIL6210_UAPI_H__ */ diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h index c38355c1f3c9..1590c49cae57 100644 --- a/include/uapi/linux/xattr.h +++ b/include/uapi/linux/xattr.h @@ -13,7 +13,7 @@ #ifndef _UAPI_LINUX_XATTR_H #define _UAPI_LINUX_XATTR_H -#ifdef __UAPI_DEF_XATTR +#if __UAPI_DEF_XATTR #define __USE_KERNEL_XATTR_DEFS #define XATTR_CREATE 0x1 /* set value, fail if attr already exists */ diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index 25e5dd916ba4..02d5125a5ee8 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -328,6 +328,8 @@ enum xfrm_spdattr_type_t { XFRMA_SPD_UNSPEC, XFRMA_SPD_INFO, XFRMA_SPD_HINFO, + XFRMA_SPD_IPV4_HTHRESH, + XFRMA_SPD_IPV6_HTHRESH, __XFRMA_SPD_MAX #define XFRMA_SPD_MAX (__XFRMA_SPD_MAX - 1) @@ -347,6 +349,11 @@ struct xfrmu_spdhinfo { __u32 spdhmcnt; }; +struct xfrmu_spdhthresh { + __u8 lbits; + __u8 rbits; +}; + struct xfrm_usersa_info { struct xfrm_selector sel; struct xfrm_id id; |