diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 110 |
1 files changed, 106 insertions, 4 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5a30a7563633..e23d78685a01 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -322,7 +322,9 @@ * @NL80211_CMD_GET_SCAN: get scan results * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the - * probe requests at CCK rate or not. + * probe requests at CCK rate or not. %NL80211_ATTR_MAC can be used to + * specify a BSSID to scan for; if not included, the wildcard BSSID will + * be used. * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to * NL80211_CMD_GET_SCAN and on the "scan" multicast group) * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, @@ -427,7 +429,11 @@ * @NL80211_CMD_ASSOCIATE: association request and notification; like * NL80211_CMD_AUTHENTICATE but for Association and Reassociation * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, - * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). + * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The + * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the + * request is for the initial association to an ESS (that attribute not + * included) or for reassociation within the ESS (that attribute is + * included). * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication @@ -477,6 +483,9 @@ * set of BSSID,frequency parameters is used (i.e., either the enforcing * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). + * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within + * the ESS in case the device is already associated and an association with + * a different BSS is desired. * Background scan period can optionally be * specified in %NL80211_ATTR_BG_SCAN_PERIOD, * if not specified default background scan configuration @@ -1285,8 +1294,11 @@ enum nl80211_commands { * @NL80211_ATTR_RESP_IE: (Re)association response information elements as * sent by peer, for ROAM and successful CONNECT events. * - * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE - * commands to specify using a reassociate frame + * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT + * commands to specify a request to reassociate within an ESS, i.e., to use + * Reassociate Request frame (with the value of this attribute in the + * Current AP address field) instead of Association Request frame which is + * used for the initial association to an ESS. * * @NL80211_ATTR_KEY: key information in a nested attribute with * %NL80211_KEY_* sub-attributes @@ -1795,6 +1807,17 @@ enum nl80211_commands { * in a PBSS. Specified in %NL80211_CMD_CONNECT to request * connecting to a PCP, and in %NL80211_CMD_START_AP to start * a PCP instead of AP. Relevant for DMG networks only. + * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the + * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains + * attributes according &enum nl80211_bss_select_attr to indicate what + * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT + * it contains the behaviour-specific attribute containing the parameters for + * BSS selection to be done by driver and/or firmware. + * + * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported + * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status + * + * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined @@ -2172,6 +2195,12 @@ enum nl80211_attrs { NL80211_ATTR_PBSS, + NL80211_ATTR_BSS_SELECT, + + NL80211_ATTR_STA_SUPPORT_P2P_PS, + + NL80211_ATTR_PAD, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2315,6 +2344,20 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 }; +/** + * enum nl80211_sta_p2p_ps_status - station support of P2P PS + * + * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism + * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism + * @NUM_NL80211_P2P_PS_STATUS: number of values + */ +enum nl80211_sta_p2p_ps_status { + NL80211_P2P_PS_UNSUPPORTED = 0, + NL80211_P2P_PS_SUPPORTED, + + NUM_NL80211_P2P_PS_STATUS, +}; + #define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER /** @@ -2472,6 +2515,9 @@ enum nl80211_sta_bss_param { * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; * each one of those is again nested with &enum nl80211_tid_stats * attributes carrying the actual values. + * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames + * received from the station (u64, usec) + * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -2508,6 +2554,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_BEACON_RX, NL80211_STA_INFO_BEACON_SIGNAL_AVG, NL80211_STA_INFO_TID_STATS, + NL80211_STA_INFO_RX_DURATION, + NL80211_STA_INFO_PAD, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -2524,6 +2572,7 @@ enum nl80211_sta_info { * transmitted MSDUs (not counting the first attempt; u64) * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted * MSDUs (u64) + * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment * @NUM_NL80211_TID_STATS: number of attributes here * @NL80211_TID_STATS_MAX: highest numbered attribute here */ @@ -2533,6 +2582,7 @@ enum nl80211_tid_stats { NL80211_TID_STATS_TX_MSDU, NL80211_TID_STATS_TX_MSDU_RETRIES, NL80211_TID_STATS_TX_MSDU_FAILED, + NL80211_TID_STATS_PAD, /* keep last */ NUM_NL80211_TID_STATS, @@ -2969,6 +3019,7 @@ enum nl80211_user_reg_hint_type { * transmitting data (on channel or globally) * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan * (on this channel or globally) + * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number * currently defined * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use @@ -2984,6 +3035,7 @@ enum nl80211_survey_info { NL80211_SURVEY_INFO_TIME_RX, NL80211_SURVEY_INFO_TIME_TX, NL80211_SURVEY_INFO_TIME_SCAN, + NL80211_SURVEY_INFO_PAD, /* keep last */ __NL80211_SURVEY_INFO_AFTER_LAST, @@ -3409,6 +3461,7 @@ enum nl80211_bss_scan_width { * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry * was last updated by a received frame. The value is expected to be * accurate to about 10ms. (u64, nanoseconds) + * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -3429,6 +3482,7 @@ enum nl80211_bss { NL80211_BSS_BEACON_TSF, NL80211_BSS_PRESP_DATA, NL80211_BSS_LAST_SEEN_BOOTTIME, + NL80211_BSS_PAD, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -3614,11 +3668,15 @@ enum nl80211_txrate_gi { * @NL80211_BAND_2GHZ: 2.4 GHz ISM band * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz) + * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace + * since newer kernel versions may support more bands */ enum nl80211_band { NL80211_BAND_2GHZ, NL80211_BAND_5GHZ, NL80211_BAND_60GHZ, + + NUM_NL80211_BANDS, }; /** @@ -4665,4 +4723,48 @@ enum nl80211_sched_scan_plan { __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 }; +/** + * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters. + * + * @band: band of BSS that must match for RSSI value adjustment. + * @delta: value used to adjust the RSSI value of matching BSS. + */ +struct nl80211_bss_select_rssi_adjust { + __u8 band; + __s8 delta; +} __attribute__((packed)); + +/** + * enum nl80211_bss_select_attr - attributes for bss selection. + * + * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved. + * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection + * is requested. + * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS + * selection should be done such that the specified band is preferred. + * When there are multiple BSS-es in the preferred band, the driver + * shall use RSSI-based BSS selection as a second step. The value of + * this attribute is according to &enum nl80211_band (u32). + * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for + * BSS-es in the specified band is to be adjusted before doing + * RSSI-based BSS selection. The attribute value is a packed structure + * value as specified by &struct nl80211_bss_select_rssi_adjust. + * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number. + * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use. + * + * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT + * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour + * which the driver shall use. + */ +enum nl80211_bss_select_attr { + __NL80211_BSS_SELECT_ATTR_INVALID, + NL80211_BSS_SELECT_ATTR_RSSI, + NL80211_BSS_SELECT_ATTR_BAND_PREF, + NL80211_BSS_SELECT_ATTR_RSSI_ADJUST, + + /* keep last */ + __NL80211_BSS_SELECT_ATTR_AFTER_LAST, + NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 +}; + #endif /* __LINUX_NL80211_H */ |