diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 207 |
1 files changed, 176 insertions, 31 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index b37bd5a1cb82..68b294e83944 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -29,6 +29,13 @@ #define NL80211_GENL_NAME "nl80211" +#define NL80211_MULTICAST_GROUP_CONFIG "config" +#define NL80211_MULTICAST_GROUP_SCAN "scan" +#define NL80211_MULTICAST_GROUP_REG "regulatory" +#define NL80211_MULTICAST_GROUP_MLME "mlme" +#define NL80211_MULTICAST_GROUP_VENDOR "vendor" +#define NL80211_MULTICAST_GROUP_TESTMODE "testmode" + /** * DOC: Station handling * @@ -173,8 +180,8 @@ * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. * * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; - * either a dump request on a %NL80211_ATTR_WIPHY or a specific get - * on an %NL80211_ATTR_IFINDEX is supported. + * either a dump request for all interfaces or a specific get with a + * single %NL80211_ATTR_IFINDEX is supported. * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response @@ -252,7 +259,18 @@ * %NL80211_ATTR_IFINDEX. * * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set - * regulatory domain. + * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device + * has a private regulatory domain, it will be returned. Otherwise, the + * global regdomain will be returned. + * A device will have a private regulatory domain if it uses the + * regulatory_hint() API. Even when a private regdomain is used the channel + * information will still be mended according to further hints from + * the regulatory core to help with compliance. A dump version of this API + * is now available which will returns the global regdomain as well as + * all private regdomains of present wiphys (for those that have it). + * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then + * its private regdomain is the only valid one for it. The regulatory + * core is not used to help with compliance in this case. * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command * after being queried by the kernel. CRDA replies by sending a regulatory * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our @@ -306,7 +324,9 @@ * if passed, define which channels should be scanned; if not * passed, all channels allowed for the current regulatory domain * are used. Extra IEs can also be passed from the userspace by - * using the %NL80211_ATTR_IE attribute. + * using the %NL80211_ATTR_IE attribute. The first cycle of the + * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY + * is supplied. * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if * scheduled scan is not running. The caller may assume that as soon * as the call returns, it is safe to start a new scheduled scan again. @@ -774,6 +794,10 @@ * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel * when this command completes. * + * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used + * as an event to indicate changes for devices with wiphy-specific regdom + * management. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -958,6 +982,8 @@ enum nl80211_commands { NL80211_CMD_TDLS_CHANNEL_SWITCH, NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH, + NL80211_CMD_WIPHY_REG_CHANGE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1655,6 +1681,9 @@ enum nl80211_commands { * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface * creation then the new interface will be owned by the netlink socket * that created it and will be destroyed when the socket is closed. + * If set during scheduled scan start then the new scan req will be + * owned by the netlink socket that created it and the scheduled scan will + * be stopped when the socket is closed. * * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is * the TDLS link initiator. @@ -1688,6 +1717,29 @@ enum nl80211_commands { * * @NL80211_ATTR_MAC_MASK: MAC address mask * + * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device + * is self-managing its regulatory information and any regulatory domain + * obtained from it is coming from the device's wiphy and not the global + * cfg80211 regdomain. + * + * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte + * array. The feature flags are identified by their bit index (see &enum + * nl80211_ext_feature_index). The bit index is ordered starting at the + * least-significant bit of the first byte in the array, ie. bit index 0 + * is located at bit 0 of byte 0. bit index 25 would be located at bit 1 + * of byte 3 (u8 array). + * + * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be + * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY + * may return a survey entry without a channel indicating global radio + * statistics (only some values are valid and make sense.) + * For devices that don't return such an entry even then, the information + * should be contained in the result as the sum of the respective counters + * over all channels. + * + * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a + * WoWLAN net-detect scan) is started, u32 in seconds. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2045,6 +2097,16 @@ enum nl80211_attrs { NL80211_ATTR_MAC_MASK, + NL80211_ATTR_WIPHY_SELF_MANAGED_REG, + + NL80211_ATTR_EXT_FEATURES, + + NL80211_ATTR_SURVEY_RADIO_STATS, + + NL80211_ATTR_NETNS_FD, + + NL80211_ATTR_SCHED_SCAN_DELAY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2085,7 +2147,7 @@ enum nl80211_attrs { #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_HT_RATES 77 -#define NL80211_MAX_SUPP_REG_RULES 32 +#define NL80211_MAX_SUPP_REG_RULES 64 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 @@ -2225,8 +2287,15 @@ struct nl80211_sta_flag_update { * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate - * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate + * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the + * same as 160 for purposes of the bitrates * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate + * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is + * a legacy rate and will be reported as the actual bitrate, i.e. + * half the base (20 MHz) rate + * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is + * a legacy rate and will be reported as the actual bitrate, i.e. + * a quarter of the base (20 MHz) rate * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -2241,6 +2310,8 @@ enum nl80211_rate_info { NL80211_RATE_INFO_80_MHZ_WIDTH, NL80211_RATE_INFO_80P80_MHZ_WIDTH, NL80211_RATE_INFO_160_MHZ_WIDTH, + NL80211_RATE_INFO_10_MHZ_WIDTH, + NL80211_RATE_INFO_5_MHZ_WIDTH, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -2285,18 +2356,24 @@ enum nl80211_sta_bss_param { * * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) - * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) - * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) - * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station) - * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station) + * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length) + * (u32, from this station) + * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length) + * (u32, to this station) + * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length) + * (u64, from this station) + * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length) + * (u64, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute * containing info as possible, see &enum nl80211_rate_info - * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) - * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this - * station) - * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station) - * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station) + * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) + * (u32, from this station) + * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) + * (u32, to this station) + * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station) + * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs) + * (u32, to this station) * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) * @NL80211_STA_INFO_LLID: the station's mesh LLID * @NL80211_STA_INFO_PLID: the station's mesh PLID @@ -2320,6 +2397,16 @@ enum nl80211_sta_bss_param { * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the * 802.11 header (u32, kbps) + * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons + * (u64) + * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) + * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average + * for beacons only (u8, dBm) + * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats) + * This is a nested attribute where each the inner attribute number is the + * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; + * each one of those is again nested with &enum nl80211_tid_stats + * attributes carrying the actual values. * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -2352,6 +2439,10 @@ enum nl80211_sta_info { NL80211_STA_INFO_CHAIN_SIGNAL, NL80211_STA_INFO_CHAIN_SIGNAL_AVG, NL80211_STA_INFO_EXPECTED_THROUGHPUT, + NL80211_STA_INFO_RX_DROP_MISC, + NL80211_STA_INFO_BEACON_RX, + NL80211_STA_INFO_BEACON_SIGNAL_AVG, + NL80211_STA_INFO_TID_STATS, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -2359,6 +2450,31 @@ enum nl80211_sta_info { }; /** + * enum nl80211_tid_stats - per TID statistics attributes + * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved + * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64) + * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or + * attempted to transmit; u64) + * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for + * transmitted MSDUs (not counting the first attempt; u64) + * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted + * MSDUs (u64) + * @NUM_NL80211_TID_STATS: number of attributes here + * @NL80211_TID_STATS_MAX: highest numbered attribute here + */ +enum nl80211_tid_stats { + __NL80211_TID_STATS_INVALID, + NL80211_TID_STATS_RX_MSDU, + NL80211_TID_STATS_TX_MSDU, + NL80211_TID_STATS_TX_MSDU_RETRIES, + NL80211_TID_STATS_TX_MSDU_FAILED, + + /* keep last */ + NUM_NL80211_TID_STATS, + NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 +}; + +/** * enum nl80211_mpath_flags - nl80211 mesh path flags * * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active @@ -2772,16 +2888,18 @@ enum nl80211_user_reg_hint_type { * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used - * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio - * spent on this channel - * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary + * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio + * was turned on (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary * channel was sensed busy (either due to activity or energy detect) - * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension + * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension * channel was sensed busy - * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent - * receiving data - * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent - * transmitting data + * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent + * receiving data (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent + * transmitting data (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan + * (on this channel or globally) * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number * currently defined * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use @@ -2791,17 +2909,25 @@ enum nl80211_survey_info { NL80211_SURVEY_INFO_FREQUENCY, NL80211_SURVEY_INFO_NOISE, NL80211_SURVEY_INFO_IN_USE, - NL80211_SURVEY_INFO_CHANNEL_TIME, - NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY, - NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY, - NL80211_SURVEY_INFO_CHANNEL_TIME_RX, - NL80211_SURVEY_INFO_CHANNEL_TIME_TX, + NL80211_SURVEY_INFO_TIME, + NL80211_SURVEY_INFO_TIME_BUSY, + NL80211_SURVEY_INFO_TIME_EXT_BUSY, + NL80211_SURVEY_INFO_TIME_RX, + NL80211_SURVEY_INFO_TIME_TX, + NL80211_SURVEY_INFO_TIME_SCAN, /* keep last */ __NL80211_SURVEY_INFO_AFTER_LAST, NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 }; +/* keep old names for compatibility */ +#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME +#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY +#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY +#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX +#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX + /** * enum nl80211_mntr_flags - monitor configuration flags * @@ -3238,6 +3364,9 @@ enum nl80211_bss { /** * enum nl80211_bss_status - BSS "status" * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. + * Note that this is no longer used since cfg80211 no longer + * keeps track of whether or not authentication was done with + * a given BSS. * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. * @@ -3621,9 +3750,12 @@ struct nl80211_pattern_support { * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network * is detected. This is a nested attribute that contains the * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It - * specifies how the scan is performed (e.g. the interval and the - * channels to scan) as well as the scan results that will - * trigger a wake (i.e. the matchsets). + * specifies how the scan is performed (e.g. the interval, the + * channels to scan and the initial delay) as well as the scan + * results that will trigger a wake (i.e. the matchsets). This + * attribute is also sent in a response to + * @NL80211_CMD_GET_WIPHY, indicating the number of match sets + * supported by the driver (u32). * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute * containing an array with information about what triggered the * wake up. If no elements are present in the array, it means @@ -4194,6 +4326,19 @@ enum nl80211_feature_flags { }; /** + * enum nl80211_ext_feature_index - bit index of extended features. + * + * @NUM_NL80211_EXT_FEATURES: number of extended features. + * @MAX_NL80211_EXT_FEATURES: highest extended feature index. + */ +enum nl80211_ext_feature_index { + + /* add new features before the definition below */ + NUM_NL80211_EXT_FEATURES, + MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1 +}; + +/** * enum nl80211_probe_resp_offload_support_attr - optional supported * protocols for probe-response offloading by the driver/FW. * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. |