diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 67 |
1 files changed, 63 insertions, 4 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 194c1eab04d8..be9519b52bb1 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -503,6 +503,9 @@ * TX status event pertaining to the TX request. * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the * management frames at CCK rate or not in 2GHz band. + * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA + * counters which will be updated to the current value. This attribute + * is used during CSA period. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. @@ -1525,10 +1528,10 @@ enum nl80211_commands { * operation). * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information * for the time while performing a channel switch. - * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter - * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL). - * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter - * field in the probe response (%NL80211_ATTR_PROBE_RESP). + * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel + * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). + * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel + * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP). * * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. * As specified in the &enum nl80211_rxmgmt_flags. @@ -1576,9 +1579,18 @@ enum nl80211_commands { * advertise values that cannot always be met. In such cases, an attempt * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. * + * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which + * should be updated when the frame is transmitted. + * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum + * supported number of csa counters. + * * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. * As specified in the &enum nl80211_tdls_peer_capability. * + * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface + * creation then the new interface will be owned by the netlink socket + * that created it and will be destroyed when the socket is closed + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1914,6 +1926,11 @@ enum nl80211_attrs { NL80211_ATTR_TDLS_PEER_CAPABILITY, + NL80211_ATTR_IFACE_SOCKET_OWNER, + + NL80211_ATTR_CSA_C_OFFSETS_TX, + NL80211_ATTR_MAX_CSA_COUNTERS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2182,6 +2199,8 @@ enum nl80211_sta_bss_param { * Contains a nested array of signal strength attributes (u8, dBm) * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. + * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the + * 802.11 header (u32, kbps) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -2213,6 +2232,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_TX_BYTES64, NL80211_STA_INFO_CHAIN_SIGNAL, NL80211_STA_INFO_CHAIN_SIGNAL_AVG, + NL80211_STA_INFO_EXPECTED_THROUGHPUT, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -2336,9 +2356,34 @@ enum nl80211_band_attr { * using this channel as the primary or any of the secondary channels * isn't possible * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this + * channel. A channel that has the INDOOR_ONLY attribute can only be + * used when there is a clear assessment that the device is operating in + * an indoor surroundings, i.e., it is connected to AC power (and not + * through portable DC inverters) or is under the control of a master + * that is acting as an AP and is connected to AC power. + * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this + * channel if it's connected concurrently to a BSS on the same channel on + * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz + * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a + * channel that has the GO_CONCURRENT attribute set can be done when there + * is a clear assessment that the device is operating under the guidance of + * an authorized master, i.e., setting up a GO while the device is also + * connected to an AP with DFS and radar detection on the UNII band (it is + * up to user-space, i.e., wpa_supplicant to perform the required + * verifications) + * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed + * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use + * + * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 + * for more information on the FCC description of the relaxations allowed + * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and + * NL80211_FREQUENCY_ATTR_GO_CONCURRENT. */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, @@ -2355,6 +2400,10 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_80MHZ, NL80211_FREQUENCY_ATTR_NO_160MHZ, NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, + NL80211_FREQUENCY_ATTR_INDOOR_ONLY, + NL80211_FREQUENCY_ATTR_GO_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_20MHZ, + NL80211_FREQUENCY_ATTR_NO_10MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -2573,10 +2622,13 @@ enum nl80211_dfs_regions { * present has been registered with the wireless core that * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a * supported feature. + * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the + * platform is operating in an indoor environment. */ enum nl80211_user_reg_hint_type { NL80211_USER_REG_HINT_USER = 0, NL80211_USER_REG_HINT_CELL_BASE = 1, + NL80211_USER_REG_HINT_INDOOR = 2, }; /** @@ -3650,6 +3702,8 @@ enum nl80211_iface_limit_attrs { * different channels may be used within this group. * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap * of supported channel widths for radar detection. + * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap + * of supported regulatory regions for radar detection. * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * @@ -3683,6 +3737,7 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_STA_AP_BI_MATCH, NL80211_IFACE_COMB_NUM_CHANNELS, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, + NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, /* keep last */ NUM_NL80211_IFACE_COMB, @@ -3893,6 +3948,9 @@ enum nl80211_ap_sme_features { * interface. An active monitor interface behaves like a normal monitor * interface, but gets added to the driver. It ensures that incoming * unicast packets directed at the configured interface address get ACKed. + * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic + * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the + * lifetime of a BSS. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3913,6 +3971,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, NL80211_FEATURE_USERSPACE_MPM = 1 << 16, NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, + NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, }; /** |