diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 339 |
1 files changed, 229 insertions, 110 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ebadb2103968..f198af600b5e 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -125,6 +125,22 @@ * via the usual ieee80211_tx_dequeue). */ +/** + * DOC: HW timestamping + * + * Timing Measurement and Fine Timing Measurement require accurate timestamps + * of the action frames TX/RX and their respective acks. + * + * To report hardware timestamps for Timing Measurement or Fine Timing + * Measurement frame RX, the low level driver should set the SKB's hwtstamp + * field to the frame RX timestamp and report the ack TX timestamp in the + * ieee80211_rx_status struct. + * + * Similarly, To report hardware timestamps for Timing Measurement or Fine + * Timing Measurement frame TX, the driver should set the SKB's hwtstamp field + * to the frame TX timestamp and report the ack RX timestamp in the + * ieee80211_tx_status struct. + */ struct device; /** @@ -261,11 +277,13 @@ enum ieee80211_chanctx_switch_mode { * done. * * @vif: the vif that should be switched from old_ctx to new_ctx + * @link_conf: the link conf that's switching * @old_ctx: the old context to which the vif was assigned * @new_ctx: the new context to which the vif must be assigned */ struct ieee80211_vif_chanctx_switch { struct ieee80211_vif *vif; + struct ieee80211_bss_conf *link_conf; struct ieee80211_chanctx_conf *old_ctx; struct ieee80211_chanctx_conf *new_ctx; }; @@ -273,8 +291,8 @@ struct ieee80211_vif_chanctx_switch { /** * enum ieee80211_bss_change - BSS change notification flags * - * These flags are used with the bss_info_changed() callback - * to indicate which BSS parameter changed. + * These flags are used with the bss_info_changed(), link_info_changed() + * and vif_cfg_changed() callbacks to indicate which parameter(s) changed. * * @BSS_CHANGED_ASSOC: association status changed (associated/disassociated), * also implies a change in the AID. @@ -513,6 +531,8 @@ struct ieee80211_fils_discovery { * This structure keeps information about a BSS (and an association * to that BSS) that can change during the lifetime of the BSS. * + * @addr: (link) address used locally + * @link_id: link ID, or 0 for non-MLO * @htc_trig_based_pkt_ext: default PE in 4us units, if BSS supports HE * @uora_exists: is the UORA element advertised by AP * @ack_enabled: indicates support to receive a multi-TID that solicits either @@ -526,11 +546,6 @@ struct ieee80211_fils_discovery { * mode only, set if the AP advertises TWT responder role) * @twt_protected: does this BSS support protected TWT frames * @twt_broadcast: does this BSS support broadcast TWT - * @assoc: association status - * @ibss_joined: indicates whether this station is part of an IBSS - * or not - * @ibss_creator: indicates if a new IBSS network is being created - * @aid: association ID number, valid only when @assoc is true * @use_cts_prot: use CTS protection * @use_short_preamble: use 802.11b short preamble * @use_short_slot: use short slot time (only relevant for ERP) @@ -551,6 +566,8 @@ struct ieee80211_fils_discovery { * IMPORTANT: These three sync_* parameters would possibly be out of sync * by the time the driver will use them. The synchronized view is currently * guaranteed only in certain callbacks. + * Note also that this is not used with MLD associations, mac80211 doesn't + * know how to track beacons for all of the links for this. * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp * @basic_rates: bitmap of basic rates, each bit stands for an @@ -576,21 +593,7 @@ struct ieee80211_fils_discovery { * threshold event and can't be enabled simultaneously with it. * @cqm_rssi_high: Connection quality monitor RSSI upper threshold. * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis - * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The - * may filter ARP queries targeted for other addresses than listed here. - * The driver must allow ARP queries targeted for all address listed here - * to pass through. An empty list implies no ARP queries need to pass. - * @arp_addr_cnt: Number of addresses currently on the list. Note that this - * may be larger than %IEEE80211_BSS_ARP_ADDR_LIST_LEN (the arp_addr_list - * array size), it's up to the driver what to do in that case. * @qos: This is a QoS-enabled BSS. - * @idle: This interface is idle. There's also a global idle flag in the - * hardware config which may be more appropriate depending on what - * your driver/device needs to do. - * @ps: power-save mode (STA only). This flag is NOT affected by - * offchannel/dynamic_ps operations. - * @ssid: The SSID of the current vif. Valid in AP and IBSS mode. - * @ssid_len: Length of SSID given in @ssid. * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode. * @txpower: TX power in dBm. INT_MIN means not configured. * @txpower_type: TX power adjustment used to control per packet Transmit @@ -628,7 +631,6 @@ struct ieee80211_fils_discovery { * @fils_discovery: FILS discovery configuration * @unsol_bcast_probe_resp_interval: Unsolicited broadcast probe response * interval. - * @s1g: BSS is S1G BSS (affects Association Request format). * @beacon_tx_rate: The configured beacon transmit rate that needs to be passed * to driver when rate control is offloaded to firmware. * @power_type: power type of BSS for 6 GHz @@ -636,9 +638,24 @@ struct ieee80211_fils_discovery { * @tx_pwr_env_num: number of @tx_pwr_env. * @pwr_reduction: power constraint of BSS. * @eht_support: does this BSS support EHT + * @csa_active: marks whether a channel switch is going on. Internally it is + * write-protected by sdata_lock and local->mtx so holding either is fine + * for read access. + * @mu_mimo_owner: indicates interface owns MU-MIMO capability + * @chanctx_conf: The channel context this interface is assigned to, or %NULL + * when it is not assigned. This pointer is RCU-protected due to the TX + * path needing to access it; even though the netdev carrier will always + * be off when it is %NULL there can still be races and packets could be + * processed after it switches back to %NULL. + * @color_change_active: marks whether a color change is ongoing. Internally it is + * write-protected by sdata_lock and local->mtx so holding either is fine + * for read access. + * @color_change_color: the bss color that will be used after the change. */ struct ieee80211_bss_conf { const u8 *bssid; + unsigned int link_id; + u8 addr[ETH_ALEN] __aligned(2); u8 htc_trig_based_pkt_ext; bool uora_exists; u8 uora_ocw_range; @@ -648,10 +665,6 @@ struct ieee80211_bss_conf { bool twt_responder; bool twt_protected; bool twt_broadcast; - /* association related data */ - bool assoc, ibss_joined; - bool ibss_creator; - u16 aid; /* erp related data */ bool use_cts_prot; bool use_short_preamble; @@ -673,13 +686,7 @@ struct ieee80211_bss_conf { s32 cqm_rssi_high; struct cfg80211_chan_def chandef; struct ieee80211_mu_group_data mu_group; - __be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN]; - int arp_addr_cnt; bool qos; - bool idle; - bool ps; - u8 ssid[IEEE80211_MAX_SSID_LEN]; - size_t ssid_len; bool hidden_ssid; int txpower; enum nl80211_tx_power_setting txpower_type; @@ -704,13 +711,19 @@ struct ieee80211_bss_conf { struct cfg80211_he_bss_color he_bss_color; struct ieee80211_fils_discovery fils_discovery; u32 unsol_bcast_probe_resp_interval; - bool s1g; struct cfg80211_bitrate_mask beacon_tx_rate; enum ieee80211_ap_reg_power power_type; struct ieee80211_tx_pwr_env tx_pwr_env[IEEE80211_TPE_MAX_IE_COUNT]; u8 tx_pwr_env_num; u8 pwr_reduction; bool eht_support; + + bool csa_active; + bool mu_mimo_owner; + struct ieee80211_chanctx_conf __rcu *chanctx_conf; + + bool color_change_active; + u8 color_change_color; }; /** @@ -869,6 +882,14 @@ enum mac80211_tx_info_flags { * @IEEE80211_TX_CTRL_DONT_REORDER: This frame should not be reordered * relative to other frames that have this flag set, independent * of their QoS TID or other priority field values. + * @IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX: first MLO TX, used mostly internally + * for sequence number assignment + * @IEEE80211_TX_CTRL_MLO_LINK: If not @IEEE80211_LINK_UNSPECIFIED, this + * frame should be transmitted on the specific link. This really is + * only relevant for frames that do not have data present, and is + * also not used for 802.3 format frames. Note that even if the frame + * is on a specific link, address translation might still apply if + * it's intended for an MLD. * * These flags are used in tx_info->control.flags. */ @@ -882,8 +903,15 @@ enum mac80211_tx_control_flags { IEEE80211_TX_INTCFL_NEED_TXPROCESSING = BIT(6), IEEE80211_TX_CTRL_NO_SEQNO = BIT(7), IEEE80211_TX_CTRL_DONT_REORDER = BIT(8), + IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX = BIT(9), + IEEE80211_TX_CTRL_MLO_LINK = 0xf0000000, }; +#define IEEE80211_LINK_UNSPECIFIED 0xf +#define IEEE80211_TX_CTRL_MLO_LINK_UNSPEC \ + u32_encode_bits(IEEE80211_LINK_UNSPECIFIED, \ + IEEE80211_TX_CTRL_MLO_LINK) + /** * enum mac80211_tx_status_flags - flags to describe transmit status * @@ -1031,7 +1059,9 @@ ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate) * (3) TX status information - driver tells mac80211 what happened * * @flags: transmit info flags, defined above - * @band: the band to transmit on (use for checking for races) + * @band: the band to transmit on (use e.g. for checking for races), + * not valid if the interface is an MLD since we won't know which + * link the frame will be transmitted on * @hw_queue: HW queue to put the frame on, skb_get_queue_mapping() gives the AC * @ack_frame_id: internal frame ID for TX status, used internally * @tx_time_est: TX time estimate in units of 4us, used internally @@ -1170,12 +1200,16 @@ struct ieee80211_rate_status { * @rates: Mrr stages that were used when sending the packet * @n_rates: Number of mrr stages (count of instances for @rates) * @free_list: list where processed skbs are stored to be free'd by the driver + * @ack_hwtstamp: Hardware timestamp of the received ack in nanoseconds + * Only needed for Timing measurement and Fine timing measurement action + * frames. Only reported by devices that have timestamping enabled. */ struct ieee80211_tx_status { struct ieee80211_sta *sta; struct ieee80211_tx_info *info; struct sk_buff *skb; struct ieee80211_rate_status *rates; + ktime_t ack_hwtstamp; u8 n_rates; struct list_head *free_list; @@ -1413,6 +1447,9 @@ enum mac80211_rx_encoding { * (TSF) timer when the first data symbol (MPDU) arrived at the hardware. * @boottime_ns: CLOCK_BOOTTIME timestamp the frame was received at, this is * needed only for beacons and probe responses that update the scan cache. + * @ack_tx_hwtstamp: Hardware timestamp for the ack TX in nanoseconds. Only + * needed for Timing measurement and Fine timing measurement action frames. + * Only reported by devices that have timestamping enabled. * @device_timestamp: arbitrary timestamp for the device, mac80211 doesn't use * it but can store it and pass it back to the driver for synchronisation * @band: the active band when this frame was received @@ -1446,7 +1483,10 @@ enum mac80211_rx_encoding { */ struct ieee80211_rx_status { u64 mactime; - u64 boottime_ns; + union { + u64 boottime_ns; + ktime_t ack_tx_hwtstamp; + }; u32 device_timestamp; u32 ampdu_reference; u32 flag; @@ -1702,21 +1742,61 @@ enum ieee80211_offload_flags { }; /** + * struct ieee80211_vif_cfg - interface configuration + * @assoc: association status + * @ibss_joined: indicates whether this station is part of an IBSS or not + * @ibss_creator: indicates if a new IBSS network is being created + * @ps: power-save mode (STA only). This flag is NOT affected by + * offchannel/dynamic_ps operations. + * @aid: association ID number, valid only when @assoc is true + * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The + * may filter ARP queries targeted for other addresses than listed here. + * The driver must allow ARP queries targeted for all address listed here + * to pass through. An empty list implies no ARP queries need to pass. + * @arp_addr_cnt: Number of addresses currently on the list. Note that this + * may be larger than %IEEE80211_BSS_ARP_ADDR_LIST_LEN (the arp_addr_list + * array size), it's up to the driver what to do in that case. + * @ssid: The SSID of the current vif. Valid in AP and IBSS mode. + * @ssid_len: Length of SSID given in @ssid. + * @s1g: BSS is S1G BSS (affects Association Request format). + * @idle: This interface is idle. There's also a global idle flag in the + * hardware config which may be more appropriate depending on what + * your driver/device needs to do. + * @ap_addr: AP MLD address, or BSSID for non-MLO connections + * (station mode only) + */ +struct ieee80211_vif_cfg { + /* association related data */ + bool assoc, ibss_joined; + bool ibss_creator; + bool ps; + u16 aid; + + __be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN]; + int arp_addr_cnt; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + size_t ssid_len; + bool s1g; + bool idle; + u8 ap_addr[ETH_ALEN] __aligned(2); +}; + +/** * struct ieee80211_vif - per-interface data * * Data in this structure is continually present for driver * use during the life of a virtual interface. * * @type: type of this virtual interface + * @cfg: vif configuration, see &struct ieee80211_vif_cfg * @bss_conf: BSS configuration for this interface, either our own * or the BSS we're associated to + * @link_conf: in case of MLD, the per-link BSS configuration, + * indexed by link ID + * @valid_links: bitmap of valid links, or 0 for non-MLO. * @addr: address of this interface * @p2p: indicates whether this AP or STA interface is a p2p * interface, i.e. a GO or p2p-sta respectively - * @csa_active: marks whether a channel switch is going on. Internally it is - * write-protected by sdata_lock and local->mtx so holding either is fine - * for read access. - * @mu_mimo_owner: indicates interface owns MU-MIMO capability * @driver_flags: flags/capabilities the driver has for this interface, * these need to be set (or cleared) when the interface is added * or, if supported by the driver, the interface type is changed @@ -1728,11 +1808,6 @@ enum ieee80211_offload_flags { * restrictions. * @hw_queue: hardware queue for each AC * @cab_queue: content-after-beacon (DTIM beacon really) queue, AP mode only - * @chanctx_conf: The channel context this interface is assigned to, or %NULL - * when it is not assigned. This pointer is RCU-protected due to the TX - * path needing to access it; even though the netdev carrier will always - * be off when it is %NULL there can still be races and packets could be - * processed after it switches back to %NULL. * @debugfs_dir: debugfs dentry, can be used by drivers to create own per * interface debug files. Note that it will be NULL for the virtual * monitor interface (if that is requested.) @@ -1747,27 +1822,22 @@ enum ieee80211_offload_flags { * protected by fq->lock. * @offload_flags: 802.3 -> 802.11 enapsulation offload flags, see * &enum ieee80211_offload_flags. - * @color_change_active: marks whether a color change is ongoing. Internally it is - * write-protected by sdata_lock and local->mtx so holding either is fine - * for read access. - * @color_change_color: the bss color that will be used after the change. * @mbssid_tx_vif: Pointer to the transmitting interface if MBSSID is enabled. */ struct ieee80211_vif { enum nl80211_iftype type; + struct ieee80211_vif_cfg cfg; struct ieee80211_bss_conf bss_conf; + struct ieee80211_bss_conf __rcu *link_conf[IEEE80211_MLD_MAX_NUM_LINKS]; + u16 valid_links; u8 addr[ETH_ALEN] __aligned(2); bool p2p; - bool csa_active; - bool mu_mimo_owner; u8 cab_queue; u8 hw_queue[IEEE80211_NUM_ACS]; struct ieee80211_txq *txq; - struct ieee80211_chanctx_conf __rcu *chanctx_conf; - u32 driver_flags; u32 offload_flags; @@ -1780,15 +1850,19 @@ struct ieee80211_vif { bool txqs_stopped[IEEE80211_NUM_ACS]; - bool color_change_active; - u8 color_change_color; - struct ieee80211_vif *mbssid_tx_vif; /* must be last */ u8 drv_priv[] __aligned(sizeof(void *)); }; +/* FIXME: for now loop over all the available links; later will be changed + * to loop only over the active links. + */ +#define for_each_vif_active_link(vif, link, link_id) \ + for (link_id = 0; link_id < ARRAY_SIZE((vif)->link_conf); link_id++) \ + if ((link = rcu_dereference((vif)->link_conf[link_id]))) + static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) { #ifdef CONFIG_MAC80211_MESH @@ -1959,36 +2033,6 @@ struct ieee80211_key_seq { }; /** - * struct ieee80211_cipher_scheme - cipher scheme - * - * This structure contains a cipher scheme information defining - * the secure packet crypto handling. - * - * @cipher: a cipher suite selector - * @iftype: a cipher iftype bit mask indicating an allowed cipher usage - * @hdr_len: a length of a security header used the cipher - * @pn_len: a length of a packet number in the security header - * @pn_off: an offset of pn from the beginning of the security header - * @key_idx_off: an offset of key index byte in the security header - * @key_idx_mask: a bit mask of key_idx bits - * @key_idx_shift: a bit shift needed to get key_idx - * key_idx value calculation: - * (sec_header_base[key_idx_off] & key_idx_mask) >> key_idx_shift - * @mic_len: a mic length in bytes - */ -struct ieee80211_cipher_scheme { - u32 cipher; - u16 iftype; - u8 hdr_len; - u8 pn_len; - u8 pn_off; - u8 key_idx_off; - u8 key_idx_mask; - u8 key_idx_shift; - u8 mic_len; -}; - -/** * enum set_key_cmd - key command * * Used with the set_key() callback in &struct ieee80211_ops, this @@ -2076,8 +2120,6 @@ struct ieee80211_sta_txpwr { enum nl80211_tx_power_setting type; }; -#define MAX_STA_LINKS 15 - /** * struct ieee80211_link_sta - station Link specific info * All link specific info for a STA link for a non MLD STA(single) @@ -2146,6 +2188,7 @@ struct ieee80211_link_sta { * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only * valid if the STA is a TDLS peer in the first place. * @mfp: indicates whether the STA uses management frame protection or not. + * @mlo: indicates whether the STA is MLO station. * @max_amsdu_subframes: indicates the maximal number of MSDUs in a single * A-MSDU. Taken from the Extended Capabilities element. 0 means * unlimited. @@ -2154,7 +2197,6 @@ struct ieee80211_link_sta { * @max_tid_amsdu_len: Maximum A-MSDU size in bytes for this TID * @txq: per-TID data TX queues (if driver uses the TXQ abstraction); note that * the last entry (%IEEE80211_NUM_TIDS) is used for non-data frames - * @multi_link_sta: Identifies if this sta is a MLD STA * @deflink: This holds the default link STA information, for non MLO STA all link * specific STA information is accessed through @deflink or through * link[0] which points to address of @deflink. For MLO Link STA @@ -2166,6 +2208,7 @@ struct ieee80211_link_sta { * @deflink address and remaining would be allocated and the address * would be assigned to link[link_id] where link_id is the id assigned * by the AP. + * @valid_links: bitmap of valid links, or 0 for non-MLO */ struct ieee80211_sta { u8 addr[ETH_ALEN]; @@ -2179,6 +2222,7 @@ struct ieee80211_sta { bool tdls; bool tdls_initiator; bool mfp; + bool mlo; u8 max_amsdu_subframes; /** @@ -2203,14 +2247,22 @@ struct ieee80211_sta { struct ieee80211_txq *txq[IEEE80211_NUM_TIDS + 1]; - bool multi_link_sta; + u16 valid_links; struct ieee80211_link_sta deflink; - struct ieee80211_link_sta *link[MAX_STA_LINKS]; + struct ieee80211_link_sta __rcu *link[IEEE80211_MLD_MAX_NUM_LINKS]; /* must be last */ u8 drv_priv[] __aligned(sizeof(void *)); }; +/* FIXME: need to loop only over links which are active and check the actual + * lock + */ +#define for_each_sta_active_link(sta, link_sta, link_id) \ + for (link_id = 0; link_id < ARRAY_SIZE((sta)->link); link_id++) \ + if (((link_sta) = rcu_dereference_protected((sta)->link[link_id],\ + 1))) \ + /** * enum sta_notify_cmd - sta notify command * @@ -2493,6 +2545,9 @@ struct ieee80211_txq { * @IEEE80211_HW_DETECTS_COLOR_COLLISION: HW/driver has support for BSS color * collision detection and doesn't need it in software. * + * @IEEE80211_HW_MLO_MCAST_MULTI_LINK_TX: Hardware/driver handles transmitting + * multicast frames on all links, mac80211 should not do that. + * * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags { @@ -2549,6 +2604,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_RX_DECAP_OFFLOAD, IEEE80211_HW_SUPPORTS_CONC_MON_RX_DECAP, IEEE80211_HW_DETECTS_COLOR_COLLISION, + IEEE80211_HW_MLO_MCAST_MULTI_LINK_TX, /* keep last, obviously */ NUM_IEEE80211_HW_FLAGS @@ -2664,9 +2720,6 @@ enum ieee80211_hw_flags { * deliver to a WMM STA during any Service Period triggered by the WMM STA. * Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct values. * - * @n_cipher_schemes: a size of an array of cipher schemes definitions. - * @cipher_schemes: a pointer to an array of cipher scheme definitions - * supported by HW. * @max_nan_de_entries: maximum number of NAN DE functions supported by the * device. * @@ -2716,8 +2769,6 @@ struct ieee80211_hw { netdev_features_t netdev_features; u8 uapsd_queues; u8 uapsd_max_sp_len; - u8 n_cipher_schemes; - const struct ieee80211_cipher_scheme *cipher_schemes; u8 max_nan_de_entries; u8 tx_sk_pacing_shift; u8 weight_multiplier; @@ -3549,6 +3600,22 @@ struct ieee80211_prep_tx_info { * for association indication. The @changed parameter indicates which * of the bss parameters has changed when a call is made. The callback * can sleep. + * Note: this callback is called if @vif_cfg_changed or @link_info_changed + * are not implemented. + * + * @vif_cfg_changed: Handler for configuration requests related to interface + * (MLD) parameters from &struct ieee80211_vif_cfg that vary during the + * lifetime of the interface (e.g. assoc status, IP addresses, etc.) + * The @changed parameter indicates which value changed. + * The callback can sleep. + * + * @link_info_changed: Handler for configuration requests related to link + * parameters from &struct ieee80211_bss_conf that are related to an + * individual link. e.g. legacy/HT/VHT/... rate information. + * The @changed parameter indicates which value changed, and the @link_id + * parameter indicates the link ID. Note that the @link_id will be 0 for + * non-MLO connections. + * The callback can sleep. * * @prepare_multicast: Prepare for multicast filter configuration. * This callback is optional, and its return value is passed @@ -4034,6 +4101,18 @@ struct ieee80211_prep_tx_info { * disable background CAC/radar detection. * @net_fill_forward_path: Called from .ndo_fill_forward_path in order to * resolve a path for hardware flow offloading + * @change_vif_links: Change the valid links on an interface, note that while + * removing the old link information is still valid (link_conf pointer), + * but may immediately disappear after the function returns. The old or + * new links bitmaps may be 0 if going from/to a non-MLO situation. + * The @old array contains pointers to the old bss_conf structures + * that were already removed, in case they're needed. + * This callback can sleep. + * @change_sta_links: Change the valid links of a station, similar to + * @change_vif_links. This callback can sleep. + * Note that a sta can also be inserted or removed with valid links, + * i.e. passed to @sta_add/@sta_state with sta->valid_links not zero. + * In fact, cannot change from having valid_links and not having them. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -4057,10 +4136,19 @@ struct ieee80211_ops { void (*bss_info_changed)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, - u32 changed); + u64 changed); + void (*vif_cfg_changed)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + u64 changed); + void (*link_info_changed)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, + u64 changed); - int (*start_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); - void (*stop_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + int (*start_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_bss_conf *link_conf); + void (*stop_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_bss_conf *link_conf); u64 (*prepare_multicast)(struct ieee80211_hw *hw, struct netdev_hw_addr_list *mc_list); @@ -4143,7 +4231,8 @@ struct ieee80211_ops { struct ieee80211_sta *sta, struct station_info *sinfo); int (*conf_tx)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, u16 ac, + struct ieee80211_vif *vif, + unsigned int link_id, u16 ac, const struct ieee80211_tx_queue_params *params); u64 (*get_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*set_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -4262,9 +4351,11 @@ struct ieee80211_ops { u32 changed); int (*assign_vif_chanctx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_bss_conf *link_conf, struct ieee80211_chanctx_conf *ctx); void (*unassign_vif_chanctx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_bss_conf *link_conf, struct ieee80211_chanctx_conf *ctx); int (*switch_vif_chanctx)(struct ieee80211_hw *hw, struct ieee80211_vif_chanctx_switch *vifs, @@ -4369,6 +4460,14 @@ struct ieee80211_ops { struct ieee80211_sta *sta, struct net_device_path_ctx *ctx, struct net_device_path *path); + int (*change_vif_links)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + u16 old_links, u16 new_links, + struct ieee80211_bss_conf *old[IEEE80211_MLD_MAX_NUM_LINKS]); + int (*change_sta_links)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + u16 old_links, u16 new_links); }; /** @@ -5032,6 +5131,7 @@ struct ieee80211_mutable_offsets { * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @offs: &struct ieee80211_mutable_offsets pointer to struct that will * receive the offsets that may be updated by the driver. + * @link_id: the link id to which the beacon belongs (or 0 for a non-MLD AP) * * If the driver implements beaconing modes, it must use this function to * obtain the beacon template. @@ -5048,7 +5148,8 @@ struct ieee80211_mutable_offsets { struct sk_buff * ieee80211_beacon_get_template(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_mutable_offsets *offs); + struct ieee80211_mutable_offsets *offs, + unsigned int link_id); /** * ieee80211_beacon_get_tim - beacon generation function @@ -5059,6 +5160,7 @@ ieee80211_beacon_get_template(struct ieee80211_hw *hw, * @tim_length: pointer to variable that will receive the TIM IE length, * (including the ID and length bytes!). * Set to 0 if invalid (in non-AP modes). + * @link_id: the link id to which the beacon belongs (or 0 for a non-MLD AP) * * If the driver implements beaconing modes, it must use this function to * obtain the beacon frame. @@ -5074,21 +5176,24 @@ ieee80211_beacon_get_template(struct ieee80211_hw *hw, */ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - u16 *tim_offset, u16 *tim_length); + u16 *tim_offset, u16 *tim_length, + unsigned int link_id); /** * ieee80211_beacon_get - beacon generation function * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @link_id: the link id to which the beacon belongs (or 0 for a non-MLD AP) * * See ieee80211_beacon_get_tim(). * * Return: See ieee80211_beacon_get_tim(). */ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) + struct ieee80211_vif *vif, + unsigned int link_id) { - return ieee80211_beacon_get_tim(hw, vif, NULL, NULL); + return ieee80211_beacon_get_tim(hw, vif, NULL, NULL, link_id); } /** @@ -6195,7 +6300,7 @@ void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success); /** * ieee80211_channel_switch_disconnect - disconnect due to channel switch error - * @vif &struct ieee80211_vif pointer from the add_interface callback. + * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @block_tx: if %true, do not send deauth frame. * * Instruct mac80211 to disconnect due to a channel switch error. The channel @@ -6208,13 +6313,14 @@ void ieee80211_channel_switch_disconnect(struct ieee80211_vif *vif, /** * ieee80211_request_smps - request SM PS transition * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @link_id: link ID for MLO, or 0 * @smps_mode: new SM PS mode * * This allows the driver to request an SM PS transition in managed * mode. This is useful when the driver has more information than * the stack about possible interference, for example by bluetooth. */ -void ieee80211_request_smps(struct ieee80211_vif *vif, +void ieee80211_request_smps(struct ieee80211_vif *vif, unsigned int link_id, enum ieee80211_smps_mode smps_mode); /** @@ -6546,6 +6652,7 @@ ieee80211_vif_type_p2p(struct ieee80211_vif *vif) * ieee80211_update_mu_groups - set the VHT MU-MIMO groud data * * @vif: the specified virtual interface + * @link_id: the link ID for MLO, otherwise 0 * @membership: 64 bits array - a bit is set if station is member of the group * @position: 2 bits per group id indicating the position in the group * @@ -6554,7 +6661,7 @@ ieee80211_vif_type_p2p(struct ieee80211_vif *vif) * matching GroupId management frame. * Calls to this function need to be serialized with RX path. */ -void ieee80211_update_mu_groups(struct ieee80211_vif *vif, +void ieee80211_update_mu_groups(struct ieee80211_vif *vif, unsigned int link_id, const u8 *membership, const u8 *position); void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif, @@ -6787,6 +6894,9 @@ static inline void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) { } +void __ieee80211_schedule_txq(struct ieee80211_hw *hw, + struct ieee80211_txq *txq, bool force); + /** * ieee80211_schedule_txq - schedule a TXQ for transmission * @@ -6799,7 +6909,11 @@ static inline void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) * The driver may call this function if it has buffered packets for * this TXQ internally. */ -void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq); +static inline void +ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq) +{ + __ieee80211_schedule_txq(hw, txq, true); +} /** * ieee80211_return_txq - return a TXQ previously acquired by ieee80211_next_txq() @@ -6811,8 +6925,12 @@ void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq); * The driver may set force=true if it has buffered packets for this TXQ * internally. */ -void ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq, - bool force); +static inline void +ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq, + bool force) +{ + __ieee80211_schedule_txq(hw, txq, force); +} /** * ieee80211_txq_may_transmit - check whether TXQ is allowed to transmit @@ -6960,10 +7078,11 @@ ieee80211_get_unsol_bcast_probe_resp_tmpl(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @color_bitmap: a 64 bit bitmap representing the colors that the local BSS is * aware of. + * @gfp: allocation flags */ void ieeee80211_obss_color_collision_notify(struct ieee80211_vif *vif, - u64 color_bitmap); + u64 color_bitmap, gfp_t gfp); /** * ieee80211_is_tx_data - check if frame is a data frame |