diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 178 |
1 files changed, 172 insertions, 6 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 81174f9b8d14..250dac390806 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -6,6 +6,7 @@ * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright 2015-2017 Intel Deutschland GmbH + * Copyright (C) 2018 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -646,6 +647,8 @@ struct survey_info { * allowed through even on unauthorized ports * @control_port_no_encrypt: TRUE to prevent encryption of control port * protocol frames. + * @control_port_over_nl80211: TRUE if userspace expects to exchange control + * port frames over NL80211 instead of the network interface. * @wep_keys: static WEP keys, if not NULL points to an array of * CFG80211_MAX_WEP_KEYS WEP keys * @wep_tx_key: key index (0..3) of the default TX static WEP key @@ -661,6 +664,7 @@ struct cfg80211_crypto_settings { bool control_port; __be16 control_port_ethertype; bool control_port_no_encrypt; + bool control_port_over_nl80211; struct key_params *wep_keys; int wep_tx_key; const u8 *psk; @@ -1147,6 +1151,7 @@ struct cfg80211_tid_stats { * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last * (IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs. + * @ack_signal: signal strength (in dBm) of the last ACK frame. */ struct station_info { u64 filled; @@ -1191,6 +1196,7 @@ struct station_info { u64 rx_duration; u8 rx_beacon_signal_avg; struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1]; + s8 ack_signal; }; #if IS_ENABLED(CONFIG_CFG80211) @@ -1448,6 +1454,8 @@ struct mesh_config { * @userspace_handles_dfs: whether user space controls DFS operation, i.e. * changes the channel when a radar is detected. This is required * to operate on DFS channels. + * @control_port_over_nl80211: TRUE if userspace expects to exchange control + * port frames over NL80211 instead of the network interface. * * These parameters are fixed when the mesh is created. */ @@ -1470,6 +1478,7 @@ struct mesh_setup { u32 basic_rates; struct cfg80211_bitrate_mask beacon_rate; bool userspace_handles_dfs; + bool control_port_over_nl80211; }; /** @@ -1905,11 +1914,16 @@ struct cfg80211_auth_request { * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n) * @ASSOC_REQ_DISABLE_VHT: Disable VHT * @ASSOC_REQ_USE_RRM: Declare RRM capability in this association + * @CONNECT_REQ_EXTERNAL_AUTH_SUPPORT: User space indicates external + * authentication capability. Drivers can offload authentication to + * userspace if this flag is set. Only applicable for cfg80211_connect() + * request (connect callback). */ enum cfg80211_assoc_req_flags { - ASSOC_REQ_DISABLE_HT = BIT(0), - ASSOC_REQ_DISABLE_VHT = BIT(1), - ASSOC_REQ_USE_RRM = BIT(2), + ASSOC_REQ_DISABLE_HT = BIT(0), + ASSOC_REQ_DISABLE_VHT = BIT(1), + ASSOC_REQ_USE_RRM = BIT(2), + CONNECT_REQ_EXTERNAL_AUTH_SUPPORT = BIT(3), }; /** @@ -2023,6 +2037,8 @@ struct cfg80211_disassoc_request { * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is * required to assume that the port is unauthorized until authorized by * user space. Otherwise, port is marked authorized by default. + * @control_port_over_nl80211: TRUE if userspace expects to exchange control + * port frames over NL80211 instead of the network interface. * @userspace_handles_dfs: whether user space controls DFS operation, i.e. * changes the channel when a radar is detected. This is required * to operate on DFS channels. @@ -2046,6 +2062,7 @@ struct cfg80211_ibss_params { bool channel_fixed; bool privacy; bool control_port; + bool control_port_over_nl80211; bool userspace_handles_dfs; int mcast_rate[NUM_NL80211_BANDS]; struct ieee80211_ht_cap ht_capa; @@ -2601,6 +2618,33 @@ struct cfg80211_pmk_conf { }; /** + * struct cfg80211_external_auth_params - Trigger External authentication. + * + * Commonly used across the external auth request and event interfaces. + * + * @action: action type / trigger for external authentication. Only significant + * for the authentication request event interface (driver to user space). + * @bssid: BSSID of the peer with which the authentication has + * to happen. Used by both the authentication request event and + * authentication response command interface. + * @ssid: SSID of the AP. Used by both the authentication request event and + * authentication response command interface. + * @key_mgmt_suite: AKM suite of the respective authentication. Used by the + * authentication request event interface. + * @status: status code, %WLAN_STATUS_SUCCESS for successful authentication, + * use %WLAN_STATUS_UNSPECIFIED_FAILURE if user space cannot give you + * the real status code for failures. Used only for the authentication + * response command interface (user space to driver). + */ +struct cfg80211_external_auth_params { + enum nl80211_external_auth_action action; + u8 bssid[ETH_ALEN] __aligned(2); + struct cfg80211_ssid ssid; + unsigned int key_mgmt_suite; + u16 status; +}; + +/** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks @@ -2923,6 +2967,12 @@ struct cfg80211_pmk_conf { * (invoked with the wireless_dev mutex held) * @del_pmk: delete the previously configured PMK for the given authenticator. * (invoked with the wireless_dev mutex held) + * + * @external_auth: indicates result of offloaded authentication processing from + * user space + * + * @tx_control_port: TX a control port frame (EAPoL). The noencrypt parameter + * tells the driver that the frame should not be encrypted. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -3216,6 +3266,14 @@ struct cfg80211_ops { const struct cfg80211_pmk_conf *conf); int (*del_pmk)(struct wiphy *wiphy, struct net_device *dev, const u8 *aa); + int (*external_auth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_external_auth_params *params); + + int (*tx_control_port)(struct wiphy *wiphy, + struct net_device *dev, + const u8 *buf, size_t len, + const u8 *dest, const __be16 proto, + const bool noencrypt); }; /* @@ -3517,6 +3575,35 @@ enum wiphy_vendor_command_flags { }; /** + * enum wiphy_opmode_flag - Station's ht/vht operation mode information flags + * + * @STA_OPMODE_MAX_BW_CHANGED: Max Bandwidth changed + * @STA_OPMODE_SMPS_MODE_CHANGED: SMPS mode changed + * @STA_OPMODE_N_SS_CHANGED: max N_SS (number of spatial streams) changed + * + */ +enum wiphy_opmode_flag { + STA_OPMODE_MAX_BW_CHANGED = BIT(0), + STA_OPMODE_SMPS_MODE_CHANGED = BIT(1), + STA_OPMODE_N_SS_CHANGED = BIT(2), +}; + +/** + * struct sta_opmode_info - Station's ht/vht operation mode information + * @changed: contains value from &enum wiphy_opmode_flag + * @smps_mode: New SMPS mode value from &enum nl80211_smps_mode of a station + * @bw: new max bandwidth value from &enum nl80211_chan_width of a station + * @rx_nss: new rx_nss value of a station + */ + +struct sta_opmode_info { + u32 changed; + enum nl80211_smps_mode smps_mode; + enum nl80211_chan_width bw; + u8 rx_nss; +}; + +/** * struct wiphy_vendor_command - vendor command definition * @info: vendor command identifying information, as used in nl80211 * @flags: flags, see &enum wiphy_vendor_command_flags @@ -4342,10 +4429,12 @@ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); * of it being pushed into the SKB * @addr: the device MAC address * @iftype: the virtual interface type + * @data_offset: offset of payload after the 802.11 header * Return: 0 on success. Non-zero on error. */ int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr, - const u8 *addr, enum nl80211_iftype iftype); + const u8 *addr, enum nl80211_iftype iftype, + u8 data_offset); /** * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3 @@ -4357,7 +4446,7 @@ int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr, static inline int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype) { - return ieee80211_data_to_8023_exthdr(skb, NULL, addr, iftype); + return ieee80211_data_to_8023_exthdr(skb, NULL, addr, iftype, 0); } /** @@ -4587,6 +4676,33 @@ const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, */ const char *reg_initiator_name(enum nl80211_reg_initiator initiator); +/** + * DOC: Internal regulatory db functions + * + */ + +/** + * reg_query_regdb_wmm - Query internal regulatory db for wmm rule + * Regulatory self-managed driver can use it to proactively + * + * @alpha2: the ISO/IEC 3166 alpha2 wmm rule to be queried. + * @freq: the freqency(in MHz) to be queried. + * @ptr: pointer where the regdb wmm data is to be stored (or %NULL if + * irrelevant). This can be used later for deduplication. + * @rule: pointer to store the wmm rule from the regulatory db. + * + * Self-managed wireless drivers can use this function to query + * the internal regulatory database to check whether the given + * ISO/IEC 3166 alpha2 country and freq have wmm rule limitations. + * + * Drivers should check the return value, its possible you can get + * an -ENODATA. + * + * Return: 0 on success. -ENODATA. + */ +int reg_query_regdb_wmm(char *alpha2, int freq, u32 *ptr, + struct ieee80211_wmm_rule *rule); + /* * callbacks for asynchronous cfg80211 methods, notification * functions and BSS handling helpers @@ -5624,6 +5740,28 @@ void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie, /** + * cfg80211_rx_control_port - notification about a received control port frame + * @dev: The device the frame matched to + * @buf: control port frame + * @len: length of the frame data + * @addr: The peer from which the frame was received + * @proto: frame protocol, typically PAE or Pre-authentication + * @unencrypted: Whether the frame was received unencrypted + * + * This function is used to inform userspace about a received control port + * frame. It should only be used if userspace indicated it wants to receive + * control port frames over nl80211. + * + * The frame is the data portion of the 802.3 or 802.11 data frame with all + * network layer headers removed (e.g. the raw EAPoL frame). + * + * Return: %true if the frame was passed to userspace + */ +bool cfg80211_rx_control_port(struct net_device *dev, + const u8 *buf, size_t len, + const u8 *addr, u16 proto, bool unencrypted); + +/** * cfg80211_cqm_rssi_notify - connection quality monitoring rssi event * @dev: network device * @rssi_event: the triggered RSSI event @@ -5685,6 +5823,20 @@ void cfg80211_radar_event(struct wiphy *wiphy, struct cfg80211_chan_def *chandef, gfp_t gfp); /** + * cfg80211_sta_opmode_change_notify - STA's ht/vht operation mode change event + * @dev: network device + * @mac: MAC address of a station which opmode got modified + * @sta_opmode: station's current opmode value + * @gfp: context flags + * + * Driver should call this function when station's opmode modified via action + * frame. + */ +void cfg80211_sta_opmode_change_notify(struct net_device *dev, const u8 *mac, + struct sta_opmode_info *sta_opmode, + gfp_t gfp); + +/** * cfg80211_cac_event - Channel availability check (CAC) event * @netdev: network device * @chandef: chandef for the current channel @@ -5758,10 +5910,13 @@ bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, * @addr: the address of the peer * @cookie: the cookie filled in @probe_client previously * @acked: indicates whether probe was acked or not + * @ack_signal: signal strength (in dBm) of the ACK frame. + * @is_valid_ack_signal: indicates the ack_signal is valid or not. * @gfp: allocation flags */ void cfg80211_probe_status(struct net_device *dev, const u8 *addr, - u64 cookie, bool acked, gfp_t gfp); + u64 cookie, bool acked, s32 ack_signal, + bool is_valid_ack_signal, gfp_t gfp); /** * cfg80211_report_obss_beacon - report beacon from other APs @@ -6202,6 +6357,17 @@ void cfg80211_nan_func_terminated(struct wireless_dev *wdev, /* ethtool helper */ void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info); +/** + * cfg80211_external_auth_request - userspace request for authentication + * @netdev: network device + * @params: External authentication parameters + * @gfp: allocation flags + * Returns: 0 on success, < 0 on error + */ +int cfg80211_external_auth_request(struct net_device *netdev, + struct cfg80211_external_auth_params *params, + gfp_t gfp); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ |