diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 105 |
1 files changed, 59 insertions, 46 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 2a200b964b7a..6e90f1a4950f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1613,11 +1613,15 @@ static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask) /** * struct cfg80211_match_set - sets of attributes to match * - * @ssid: SSID to be matched; may be zero-length for no match (RSSI only) + * @ssid: SSID to be matched; may be zero-length in case of BSSID match + * or no match (RSSI only) + * @bssid: BSSID to be matched; may be all-zero BSSID in case of SSID match + * or no match (RSSI only) * @rssi_thold: don't report scan results below this threshold (in s32 dBm) */ struct cfg80211_match_set { struct cfg80211_ssid ssid; + u8 bssid[ETH_ALEN]; s32 rssi_thold; }; @@ -1662,6 +1666,7 @@ struct cfg80211_bss_select_adjust { * (others are filtered out). * If ommited, all results are passed. * @n_match_sets: number of match sets + * @results_wk: worker for processing results notification. * @wiphy: the wiphy this was for * @dev: the interface * @scan_start: start time of the scheduled scan @@ -1678,6 +1683,8 @@ struct cfg80211_bss_select_adjust { * @rcu_head: RCU callback used to free the struct * @owner_nlportid: netlink portid of owner (if this should is a request * owned by a particular socket) + * @nl_owner_dead: netlink owner socket was closed - this request be freed + * @list: for keeping list of requests. * @delay: delay in seconds to use before starting the first scan * cycle. The driver may ignore this parameter and start * immediately (or at any other time), if this feature is not @@ -1720,8 +1727,11 @@ struct cfg80211_sched_scan_request { struct wiphy *wiphy; struct net_device *dev; unsigned long scan_start; + bool report_results; struct rcu_head rcu_head; u32 owner_nlportid; + bool nl_owner_dead; + struct list_head list; /* keep last */ struct ieee80211_channel *channels[0]; @@ -2678,8 +2688,7 @@ struct cfg80211_nan_func { * indication of requesting reassociation. * In both the driver-initiated and new connect() call initiated roaming * cases, the result of roaming is indicated with a call to - * cfg80211_roamed() or cfg80211_roamed_bss(). - * (invoked with the wireless_dev mutex held) + * cfg80211_roamed(). (invoked with the wireless_dev mutex held) * @update_connect_params: Update the connect parameters while connected to a * BSS. The updated parameters can be used by driver/firmware for * subsequent BSS selection (roaming) decisions and to form the @@ -2765,12 +2774,12 @@ struct cfg80211_nan_func { * @set_cqm_txe_config: Configure connection quality monitor TX error * thresholds. * @sched_scan_start: Tell the driver to start a scheduled scan. - * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan. This - * call must stop the scheduled scan and be ready for starting a new one - * before it returns, i.e. @sched_scan_start may be called immediately - * after that again and should not fail in that case. The driver should - * not call cfg80211_sched_scan_stopped() for a requested stop (when this - * method returns 0.) + * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan with + * given request id. This call must stop the scheduled scan and be ready + * for starting a new one before it returns, i.e. @sched_scan_start may be + * called immediately after that again and should not fail in that case. + * The driver should not call cfg80211_sched_scan_stopped() for a requested + * stop (when this method returns 0). * * @mgmt_frame_register: Notify driver that a management frame type was * registered. The callback is allowed to sleep. @@ -3068,7 +3077,8 @@ struct cfg80211_ops { int (*sched_scan_start)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_sched_scan_request *request); - int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev); + int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev, + u64 reqid); int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_gtk_rekey_data *data); @@ -3213,7 +3223,7 @@ enum wiphy_flags { WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7), WIPHY_FLAG_IBSS_RSN = BIT(8), WIPHY_FLAG_MESH_AUTH = BIT(10), - WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11), + /* use hole at 11 */ /* use hole at 12 */ WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), WIPHY_FLAG_AP_UAPSD = BIT(14), @@ -3551,6 +3561,8 @@ struct wiphy_iftype_ext_capab { * this variable determines its size * @max_scan_ssids: maximum number of SSIDs the device can scan for in * any given scan + * @max_sched_scan_reqs: maximum number of scheduled scan requests that + * the device can run concurrently. * @max_sched_scan_ssids: maximum number of SSIDs the device can scan * for in any given scheduled scan * @max_match_sets: maximum number of match sets the device can handle @@ -3687,6 +3699,7 @@ struct wiphy { int bss_priv_size; u8 max_scan_ssids; + u8 max_sched_scan_reqs; u8 max_sched_scan_ssids; u8 max_match_sets; u16 max_scan_ie_len; @@ -3988,6 +4001,7 @@ struct cfg80211_cqm_config; * @event_list: (private) list for internal event processing * @event_lock: (private) lock for event list * @owner_nlportid: (private) owner socket port ID + * @nl_owner_dead: (private) owner socket went away * @cqm_config: (private) nl80211 RSSI monitor state */ struct wireless_dev { @@ -4037,12 +4051,13 @@ struct wireless_dev { u32 ap_unexpected_nlportid; + u32 owner_nlportid; + bool nl_owner_dead; + bool cac_started; unsigned long cac_start_time; unsigned int cac_time_ms; - u32 owner_nlportid; - #ifdef CONFIG_CFG80211_WEXT /* wext data */ struct { @@ -4551,31 +4566,34 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, * cfg80211_sched_scan_results - notify that new scan results are available * * @wiphy: the wiphy which got scheduled scan results + * @reqid: identifier for the related scheduled scan request */ -void cfg80211_sched_scan_results(struct wiphy *wiphy); +void cfg80211_sched_scan_results(struct wiphy *wiphy, u64 reqid); /** * cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped * * @wiphy: the wiphy on which the scheduled scan stopped + * @reqid: identifier for the related scheduled scan request * * The driver can call this function to inform cfg80211 that the * scheduled scan had to be stopped, for whatever reason. The driver * is then called back via the sched_scan_stop operation when done. */ -void cfg80211_sched_scan_stopped(struct wiphy *wiphy); +void cfg80211_sched_scan_stopped(struct wiphy *wiphy, u64 reqid); /** * cfg80211_sched_scan_stopped_rtnl - notify that the scheduled scan has stopped * * @wiphy: the wiphy on which the scheduled scan stopped + * @reqid: identifier for the related scheduled scan request * * The driver can call this function to inform cfg80211 that the * scheduled scan had to be stopped, for whatever reason. The driver * is then called back via the sched_scan_stop operation when done. * This function should be called with rtnl locked. */ -void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy); +void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy, u64 reqid); /** * cfg80211_inform_bss_frame_data - inform cfg80211 of a received BSS frame @@ -5376,51 +5394,46 @@ cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid, } /** - * cfg80211_roamed - notify cfg80211 of roaming + * struct cfg80211_roam_info - driver initiated roaming information * - * @dev: network device * @channel: the channel of the new AP - * @bssid: the BSSID of the new AP + * @bss: entry of bss to which STA got roamed (may be %NULL if %bssid is set) + * @bssid: the BSSID of the new AP (may be %NULL if %bss is set) * @req_ie: association request IEs (maybe be %NULL) * @req_ie_len: association request IEs length * @resp_ie: association response IEs (may be %NULL) * @resp_ie_len: assoc response IEs length - * @gfp: allocation flags - * - * It should be called by the underlying driver whenever it roamed - * from one AP to another while connected. */ -void cfg80211_roamed(struct net_device *dev, - struct ieee80211_channel *channel, - const u8 *bssid, - const u8 *req_ie, size_t req_ie_len, - const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp); +struct cfg80211_roam_info { + struct ieee80211_channel *channel; + struct cfg80211_bss *bss; + const u8 *bssid; + const u8 *req_ie; + size_t req_ie_len; + const u8 *resp_ie; + size_t resp_ie_len; +}; /** - * cfg80211_roamed_bss - notify cfg80211 of roaming + * cfg80211_roamed - notify cfg80211 of roaming * * @dev: network device - * @bss: entry of bss to which STA got roamed - * @req_ie: association request IEs (maybe be %NULL) - * @req_ie_len: association request IEs length - * @resp_ie: association response IEs (may be %NULL) - * @resp_ie_len: assoc response IEs length + * @info: information about the new BSS. struct &cfg80211_roam_info. * @gfp: allocation flags * - * This is just a wrapper to notify cfg80211 of roaming event with driver - * passing bss to avoid a race in timeout of the bss entry. It should be - * called by the underlying driver whenever it roamed from one AP to another - * while connected. Drivers which have roaming implemented in firmware - * may use this function to avoid a race in bss entry timeout where the bss - * entry of the new AP is seen in the driver, but gets timed out by the time - * it is accessed in __cfg80211_roamed() due to delay in scheduling + * This function may be called with the driver passing either the BSSID of the + * new AP or passing the bss entry to avoid a race in timeout of the bss entry. + * It should be called by the underlying driver whenever it roamed from one AP + * to another while connected. Drivers which have roaming implemented in + * firmware should pass the bss entry to avoid a race in bss entry timeout where + * the bss entry of the new AP is seen in the driver, but gets timed out by the + * time it is accessed in __cfg80211_roamed() due to delay in scheduling * rdev->event_work. In case of any failures, the reference is released - * either in cfg80211_roamed_bss() or in __cfg80211_romed(), Otherwise, - * it will be released while diconneting from the current bss. + * either in cfg80211_roamed() or in __cfg80211_romed(), Otherwise, it will be + * released while diconneting from the current bss. */ -void cfg80211_roamed_bss(struct net_device *dev, struct cfg80211_bss *bss, - const u8 *req_ie, size_t req_ie_len, - const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp); +void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info, + gfp_t gfp); /** * cfg80211_disconnected - notify cfg80211 that connection was dropped |