diff options
Diffstat (limited to 'include/media')
| -rw-r--r-- | include/media/davinci/vpbe.h | 184 | ||||
| -rw-r--r-- | include/media/davinci/vpbe_display.h | 122 | ||||
| -rw-r--r-- | include/media/davinci/vpbe_osd.h | 382 | ||||
| -rw-r--r-- | include/media/davinci/vpbe_types.h | 74 | ||||
| -rw-r--r-- | include/media/davinci/vpbe_venc.h | 37 | ||||
| -rw-r--r-- | include/media/davinci/vpfe_capture.h | 177 | ||||
| -rw-r--r-- | include/media/davinci/vpss.h | 111 | ||||
| -rw-r--r-- | include/media/v4l2-subdev.h | 4 |
8 files changed, 4 insertions, 1087 deletions
diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h deleted file mode 100644 index 646c4b48b29d..000000000000 --- a/include/media/davinci/vpbe.h +++ /dev/null @@ -1,184 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2010 Texas Instruments Inc - */ -#ifndef _VPBE_H -#define _VPBE_H - -#include <linux/videodev2.h> -#include <linux/i2c.h> - -#include <media/v4l2-dev.h> -#include <media/v4l2-ioctl.h> -#include <media/v4l2-device.h> -#include <media/davinci/vpbe_osd.h> -#include <media/davinci/vpbe_venc.h> -#include <media/davinci/vpbe_types.h> - -/* OSD configuration info */ -struct osd_config_info { - char module_name[32]; -}; - -struct vpbe_output { - struct v4l2_output output; - /* - * If output capabilities include dv_timings, list supported timings - * below - */ - char *subdev_name; - /* - * default_mode identifies the default timings set at the venc or - * external encoder. - */ - char *default_mode; - /* - * Fields below are used for supporting multiple modes. For example, - * LCD panel might support different modes and they are listed here. - * Similarly for supporting external encoders, lcd controller port - * requires a set of non-standard timing values to be listed here for - * each supported mode since venc is used in non-standard timing mode - * for interfacing with external encoder similar to configuring lcd - * panel timings - */ - unsigned int num_modes; - struct vpbe_enc_mode_info *modes; - /* - * Bus configuration goes here for external encoders. Some encoders - * may require multiple interface types for each of the output. For - * example, SD modes would use YCC8 where as HD mode would use YCC16. - * Not sure if this is needed on a per mode basis instead of per - * output basis. If per mode is needed, we may have to move this to - * mode_info structure - */ - u32 if_params; -}; - -/* encoder configuration info */ -struct encoder_config_info { - char module_name[32]; - /* Is this an i2c device ? */ - unsigned int is_i2c:1; - /* i2c subdevice board info */ - struct i2c_board_info board_info; -}; - -/*amplifier configuration info */ -struct amp_config_info { - char module_name[32]; - /* Is this an i2c device ? */ - unsigned int is_i2c:1; - /* i2c subdevice board info */ - struct i2c_board_info board_info; -}; - -/* structure for defining vpbe display subsystem components */ -struct vpbe_config { - char module_name[32]; - /* i2c bus adapter no */ - int i2c_adapter_id; - struct osd_config_info osd; - struct encoder_config_info venc; - /* external encoder information goes here */ - int num_ext_encoders; - struct encoder_config_info *ext_encoders; - /* amplifier information goes here */ - struct amp_config_info *amp; - unsigned int num_outputs; - /* Order is venc outputs followed by LCD and then external encoders */ - struct vpbe_output *outputs; -}; - -struct vpbe_device; - -struct vpbe_device_ops { - /* Enumerate the outputs */ - int (*enum_outputs)(struct vpbe_device *vpbe_dev, - struct v4l2_output *output); - - /* Set output to the given index */ - int (*set_output)(struct vpbe_device *vpbe_dev, - int index); - - /* Get current output */ - unsigned int (*get_output)(struct vpbe_device *vpbe_dev); - - /* Set DV preset at current output */ - int (*s_dv_timings)(struct vpbe_device *vpbe_dev, - struct v4l2_dv_timings *dv_timings); - - /* Get DV presets supported at the output */ - int (*g_dv_timings)(struct vpbe_device *vpbe_dev, - struct v4l2_dv_timings *dv_timings); - - /* Enumerate the DV Presets supported at the output */ - int (*enum_dv_timings)(struct vpbe_device *vpbe_dev, - struct v4l2_enum_dv_timings *timings_info); - - /* Set std at the output */ - int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id std_id); - - /* Get the current std at the output */ - int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id); - - /* initialize the device */ - int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev); - - /* De-initialize the device */ - void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev); - - /* Get the current mode info */ - int (*get_mode_info)(struct vpbe_device *vpbe_dev, - struct vpbe_enc_mode_info*); - - /* - * Set the current mode in the encoder. Alternate way of setting - * standard or DV preset or custom timings in the encoder - */ - int (*set_mode)(struct vpbe_device *vpbe_dev, - struct vpbe_enc_mode_info*); - /* Power management operations */ - int (*suspend)(struct vpbe_device *vpbe_dev); - int (*resume)(struct vpbe_device *vpbe_dev); -}; - -/* struct for vpbe device */ -struct vpbe_device { - /* V4l2 device */ - struct v4l2_device v4l2_dev; - /* vpbe dispay controller cfg */ - struct vpbe_config *cfg; - /* parent device */ - struct device *pdev; - /* external encoder v4l2 sub devices */ - struct v4l2_subdev **encoders; - /* current encoder index */ - int current_sd_index; - /* external amplifier v4l2 subdevice */ - struct v4l2_subdev *amp; - struct mutex lock; - /* device initialized */ - int initialized; - /* vpbe dac clock */ - struct clk *dac_clk; - /* osd_device pointer */ - struct osd_state *osd_device; - /* venc device pointer */ - struct venc_platform_data *venc_device; - /* - * fields below are accessed by users of vpbe_device. Not the - * ones above - */ - - /* current output */ - int current_out_index; - /* lock used by caller to do atomic operation on vpbe device */ - /* current timings set in the controller */ - struct vpbe_enc_mode_info current_timings; - /* venc sub device */ - struct v4l2_subdev *venc; - /* device operations below */ - struct vpbe_device_ops ops; -}; - -#endif diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h deleted file mode 100644 index d8751ea926a2..000000000000 --- a/include/media/davinci/vpbe_display.h +++ /dev/null @@ -1,122 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/ - */ -#ifndef VPBE_DISPLAY_H -#define VPBE_DISPLAY_H - -/* Header files */ -#include <linux/videodev2.h> -#include <media/v4l2-common.h> -#include <media/v4l2-fh.h> -#include <media/videobuf2-v4l2.h> -#include <media/videobuf2-dma-contig.h> -#include <media/davinci/vpbe_types.h> -#include <media/davinci/vpbe_osd.h> -#include <media/davinci/vpbe.h> - -#define VPBE_DISPLAY_MAX_DEVICES 2 - -enum vpbe_display_device_id { - VPBE_DISPLAY_DEVICE_0, - VPBE_DISPLAY_DEVICE_1 -}; - -#define VPBE_DISPLAY_DRV_NAME "vpbe-display" - -#define VPBE_DISPLAY_MAJOR_RELEASE 1 -#define VPBE_DISPLAY_MINOR_RELEASE 0 -#define VPBE_DISPLAY_BUILD 1 -#define VPBE_DISPLAY_VERSION_CODE ((VPBE_DISPLAY_MAJOR_RELEASE << 16) | \ - (VPBE_DISPLAY_MINOR_RELEASE << 8) | \ - VPBE_DISPLAY_BUILD) - -#define VPBE_DISPLAY_VALID_FIELD(field) ((V4L2_FIELD_NONE == field) || \ - (V4L2_FIELD_ANY == field) || (V4L2_FIELD_INTERLACED == field)) - -/* Exp ratio numerator and denominator constants */ -#define VPBE_DISPLAY_H_EXP_RATIO_N 9 -#define VPBE_DISPLAY_H_EXP_RATIO_D 8 -#define VPBE_DISPLAY_V_EXP_RATIO_N 6 -#define VPBE_DISPLAY_V_EXP_RATIO_D 5 - -/* Zoom multiplication factor */ -#define VPBE_DISPLAY_ZOOM_4X 4 -#define VPBE_DISPLAY_ZOOM_2X 2 - -/* Structures */ -struct display_layer_info { - int enable; - /* Layer ID used by Display Manager */ - enum osd_layer id; - struct osd_layer_config config; - enum osd_zoom_factor h_zoom; - enum osd_zoom_factor v_zoom; - enum osd_h_exp_ratio h_exp; - enum osd_v_exp_ratio v_exp; -}; - -struct vpbe_disp_buffer { - struct vb2_v4l2_buffer vb; - struct list_head list; -}; - -/* vpbe display object structure */ -struct vpbe_layer { - /* Pointer to the vpbe_display */ - struct vpbe_display *disp_dev; - /* Pointer pointing to current v4l2_buffer */ - struct vpbe_disp_buffer *cur_frm; - /* Pointer pointing to next v4l2_buffer */ - struct vpbe_disp_buffer *next_frm; - /* vb2 specific parameters - * Buffer queue used in vb2 - */ - struct vb2_queue buffer_queue; - /* Queue of filled frames */ - struct list_head dma_queue; - /* Used for video buffer handling */ - spinlock_t irqlock; - /* V4l2 specific parameters */ - /* Identifies video device for this layer */ - struct video_device video_dev; - /* Used to store pixel format */ - struct v4l2_pix_format pix_fmt; - enum v4l2_field buf_field; - /* Video layer configuration params */ - struct display_layer_info layer_info; - /* vpbe specific parameters - * enable window for display - */ - unsigned char window_enable; - /* number of open instances of the layer */ - unsigned int usrs; - /* Indicates id of the field which is being displayed */ - unsigned int field_id; - /* Identifies device object */ - enum vpbe_display_device_id device_id; - /* facilitation of ioctl ops lock by v4l2*/ - struct mutex opslock; - u8 layer_first_int; -}; - -/* vpbe device structure */ -struct vpbe_display { - /* layer specific parameters */ - /* lock for isr updates to buf layers*/ - spinlock_t dma_queue_lock; - /* C-Plane offset from start of y-plane */ - unsigned int cbcr_ofst; - struct vpbe_layer *dev[VPBE_DISPLAY_MAX_DEVICES]; - struct vpbe_device *vpbe_dev; - struct osd_state *osd_device; -}; - -struct buf_config_params { - unsigned char min_numbuffers; - unsigned char numbuffers[VPBE_DISPLAY_MAX_DEVICES]; - unsigned int min_bufsize[VPBE_DISPLAY_MAX_DEVICES]; - unsigned int layer_bufsize[VPBE_DISPLAY_MAX_DEVICES]; -}; - -#endif /* VPBE_DISPLAY_H */ diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h deleted file mode 100644 index a4fc4f2a56fb..000000000000 --- a/include/media/davinci/vpbe_osd.h +++ /dev/null @@ -1,382 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2007-2009 Texas Instruments Inc - * Copyright (C) 2007 MontaVista Software, Inc. - * - * Andy Lowe (alowe@mvista.com), MontaVista Software - * - Initial version - * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd. - * - ported to sub device interface - */ -#ifndef _OSD_H -#define _OSD_H - -#include <media/davinci/vpbe_types.h> - -#define DM644X_VPBE_OSD_SUBDEV_NAME "dm644x,vpbe-osd" -#define DM365_VPBE_OSD_SUBDEV_NAME "dm365,vpbe-osd" -#define DM355_VPBE_OSD_SUBDEV_NAME "dm355,vpbe-osd" - -/** - * enum osd_layer - * @WIN_OSD0: On-Screen Display Window 0 - * @WIN_VID0: Video Window 0 - * @WIN_OSD1: On-Screen Display Window 1 - * @WIN_VID1: Video Window 1 - * - * Description: - * An enumeration of the osd display layers. - */ -enum osd_layer { - WIN_OSD0, - WIN_VID0, - WIN_OSD1, - WIN_VID1, -}; - -/** - * enum osd_win_layer - * @OSDWIN_OSD0: On-Screen Display Window 0 - * @OSDWIN_OSD1: On-Screen Display Window 1 - * - * Description: - * An enumeration of the OSD Window layers. - */ -enum osd_win_layer { - OSDWIN_OSD0, - OSDWIN_OSD1, -}; - -/** - * enum osd_pix_format - * @PIXFMT_1BPP: 1-bit-per-pixel bitmap - * @PIXFMT_2BPP: 2-bits-per-pixel bitmap - * @PIXFMT_4BPP: 4-bits-per-pixel bitmap - * @PIXFMT_8BPP: 8-bits-per-pixel bitmap - * @PIXFMT_RGB565: 16-bits-per-pixel RGB565 - * @PIXFMT_YCBCRI: YUV 4:2:2 - * @PIXFMT_RGB888: 24-bits-per-pixel RGB888 - * @PIXFMT_YCRCBI: YUV 4:2:2 with chroma swap - * @PIXFMT_NV12: YUV 4:2:0 planar - * @PIXFMT_OSD_ATTR: OSD Attribute Window pixel format (4bpp) - * - * Description: - * An enumeration of the DaVinci pixel formats. - */ -enum osd_pix_format { - PIXFMT_1BPP = 0, - PIXFMT_2BPP, - PIXFMT_4BPP, - PIXFMT_8BPP, - PIXFMT_RGB565, - PIXFMT_YCBCRI, - PIXFMT_RGB888, - PIXFMT_YCRCBI, - PIXFMT_NV12, - PIXFMT_OSD_ATTR, -}; - -/** - * enum osd_h_exp_ratio - * @H_EXP_OFF: no expansion (1/1) - * @H_EXP_9_OVER_8: 9/8 expansion ratio - * @H_EXP_3_OVER_2: 3/2 expansion ratio - * - * Description: - * An enumeration of the available horizontal expansion ratios. - */ -enum osd_h_exp_ratio { - H_EXP_OFF, - H_EXP_9_OVER_8, - H_EXP_3_OVER_2, -}; - -/** - * enum osd_v_exp_ratio - * @V_EXP_OFF: no expansion (1/1) - * @V_EXP_6_OVER_5: 6/5 expansion ratio - * - * Description: - * An enumeration of the available vertical expansion ratios. - */ -enum osd_v_exp_ratio { - V_EXP_OFF, - V_EXP_6_OVER_5, -}; - -/** - * enum osd_zoom_factor - * @ZOOM_X1: no zoom (x1) - * @ZOOM_X2: x2 zoom - * @ZOOM_X4: x4 zoom - * - * Description: - * An enumeration of the available zoom factors. - */ -enum osd_zoom_factor { - ZOOM_X1, - ZOOM_X2, - ZOOM_X4, -}; - -/** - * enum osd_clut - * @ROM_CLUT: ROM CLUT - * @RAM_CLUT: RAM CLUT - * - * Description: - * An enumeration of the available Color Lookup Tables (CLUTs). - */ -enum osd_clut { - ROM_CLUT, - RAM_CLUT, -}; - -/** - * enum osd_rom_clut - * @ROM_CLUT0: Macintosh CLUT - * @ROM_CLUT1: CLUT from DM270 and prior devices - * - * Description: - * An enumeration of the ROM Color Lookup Table (CLUT) options. - */ -enum osd_rom_clut { - ROM_CLUT0, - ROM_CLUT1, -}; - -/** - * enum osd_blending_factor - * @OSD_0_VID_8: OSD pixels are fully transparent - * @OSD_1_VID_7: OSD pixels contribute 1/8, video pixels contribute 7/8 - * @OSD_2_VID_6: OSD pixels contribute 2/8, video pixels contribute 6/8 - * @OSD_3_VID_5: OSD pixels contribute 3/8, video pixels contribute 5/8 - * @OSD_4_VID_4: OSD pixels contribute 4/8, video pixels contribute 4/8 - * @OSD_5_VID_3: OSD pixels contribute 5/8, video pixels contribute 3/8 - * @OSD_6_VID_2: OSD pixels contribute 6/8, video pixels contribute 2/8 - * @OSD_8_VID_0: OSD pixels are fully opaque - * - * Description: - * An enumeration of the DaVinci pixel blending factor options. - */ -enum osd_blending_factor { - OSD_0_VID_8, - OSD_1_VID_7, - OSD_2_VID_6, - OSD_3_VID_5, - OSD_4_VID_4, - OSD_5_VID_3, - OSD_6_VID_2, - OSD_8_VID_0, -}; - -/** - * enum osd_blink_interval - * @BLINK_X1: blink interval is 1 vertical refresh cycle - * @BLINK_X2: blink interval is 2 vertical refresh cycles - * @BLINK_X3: blink interval is 3 vertical refresh cycles - * @BLINK_X4: blink interval is 4 vertical refresh cycles - * - * Description: - * An enumeration of the DaVinci pixel blinking interval options. - */ -enum osd_blink_interval { - BLINK_X1, - BLINK_X2, - BLINK_X3, - BLINK_X4, -}; - -/** - * enum osd_cursor_h_width - * @H_WIDTH_1: horizontal line width is 1 pixel - * @H_WIDTH_4: horizontal line width is 4 pixels - * @H_WIDTH_8: horizontal line width is 8 pixels - * @H_WIDTH_12: horizontal line width is 12 pixels - * @H_WIDTH_16: horizontal line width is 16 pixels - * @H_WIDTH_20: horizontal line width is 20 pixels - * @H_WIDTH_24: horizontal line width is 24 pixels - * @H_WIDTH_28: horizontal line width is 28 pixels - */ -enum osd_cursor_h_width { - H_WIDTH_1, - H_WIDTH_4, - H_WIDTH_8, - H_WIDTH_12, - H_WIDTH_16, - H_WIDTH_20, - H_WIDTH_24, - H_WIDTH_28, -}; - -/** - * enum osd_cursor_v_width - * @V_WIDTH_1: vertical line width is 1 line - * @V_WIDTH_2: vertical line width is 2 lines - * @V_WIDTH_4: vertical line width is 4 lines - * @V_WIDTH_6: vertical line width is 6 lines - * @V_WIDTH_8: vertical line width is 8 lines - * @V_WIDTH_10: vertical line width is 10 lines - * @V_WIDTH_12: vertical line width is 12 lines - * @V_WIDTH_14: vertical line width is 14 lines - */ -enum osd_cursor_v_width { - V_WIDTH_1, - V_WIDTH_2, - V_WIDTH_4, - V_WIDTH_6, - V_WIDTH_8, - V_WIDTH_10, - V_WIDTH_12, - V_WIDTH_14, -}; - -/** - * struct osd_cursor_config - * @xsize: horizontal size in pixels - * @ysize: vertical size in lines - * @xpos: horizontal offset in pixels from the left edge of the display - * @ypos: vertical offset in lines from the top of the display - * @interlaced: Non-zero if the display is interlaced, or zero otherwise - * @h_width: horizontal line width - * @v_width: vertical line width - * @clut: the CLUT selector (ROM or RAM) for the cursor color - * @clut_index: an index into the CLUT for the cursor color - * - * Description: - * A structure describing the configuration parameters of the hardware - * rectangular cursor. - */ -struct osd_cursor_config { - unsigned xsize; - unsigned ysize; - unsigned xpos; - unsigned ypos; - int interlaced; - enum osd_cursor_h_width h_width; - enum osd_cursor_v_width v_width; - enum osd_clut clut; - unsigned char clut_index; -}; - -/** - * struct osd_layer_config - * @pixfmt: pixel format - * @line_length: offset in bytes between start of each line in memory - * @xsize: number of horizontal pixels displayed per line - * @ysize: number of lines displayed - * @xpos: horizontal offset in pixels from the left edge of the display - * @ypos: vertical offset in lines from the top of the display - * @interlaced: Non-zero if the display is interlaced, or zero otherwise - * - * Description: - * A structure describing the configuration parameters of an On-Screen Display - * (OSD) or video layer related to how the image is stored in memory. - * @line_length must be a multiple of the cache line size (32 bytes). - */ -struct osd_layer_config { - enum osd_pix_format pixfmt; - unsigned line_length; - unsigned xsize; - unsigned ysize; - unsigned xpos; - unsigned ypos; - int interlaced; -}; - -/* parameters that apply on a per-window (OSD or video) basis */ -struct osd_window_state { - int is_allocated; - int is_enabled; - unsigned long fb_base_phys; - enum osd_zoom_factor h_zoom; - enum osd_zoom_factor v_zoom; - struct osd_layer_config lconfig; -}; - -/* parameters that apply on a per-OSD-window basis */ -struct osd_osdwin_state { - enum osd_clut clut; - enum osd_blending_factor blend; - int colorkey_blending; - unsigned colorkey; - int rec601_attenuation; - /* index is pixel value */ - unsigned char palette_map[16]; -}; - -/* hardware rectangular cursor parameters */ -struct osd_cursor_state { - int is_enabled; - struct osd_cursor_config config; -}; - -struct osd_state; - -struct vpbe_osd_ops { - int (*initialize)(struct osd_state *sd); - int (*request_layer)(struct osd_state *sd, enum osd_layer layer); - void (*release_layer)(struct osd_state *sd, enum osd_layer layer); - int (*enable_layer)(struct osd_state *sd, enum osd_layer layer, - int otherwin); - void (*disable_layer)(struct osd_state *sd, enum osd_layer layer); - int (*set_layer_config)(struct osd_state *sd, enum osd_layer layer, - struct osd_layer_config *lconfig); - void (*get_layer_config)(struct osd_state *sd, enum osd_layer layer, - struct osd_layer_config *lconfig); - void (*start_layer)(struct osd_state *sd, enum osd_layer layer, - unsigned long fb_base_phys, - unsigned long cbcr_ofst); - void (*set_left_margin)(struct osd_state *sd, u32 val); - void (*set_top_margin)(struct osd_state *sd, u32 val); - void (*set_interpolation_filter)(struct osd_state *sd, int filter); - int (*set_vid_expansion)(struct osd_state *sd, - enum osd_h_exp_ratio h_exp, - enum osd_v_exp_ratio v_exp); - void (*get_vid_expansion)(struct osd_state *sd, - enum osd_h_exp_ratio *h_exp, - enum osd_v_exp_ratio *v_exp); - void (*set_zoom)(struct osd_state *sd, enum osd_layer layer, - enum osd_zoom_factor h_zoom, - enum osd_zoom_factor v_zoom); -}; - -struct osd_state { - enum vpbe_version vpbe_type; - spinlock_t lock; - struct device *dev; - dma_addr_t osd_base_phys; - void __iomem *osd_base; - unsigned long osd_size; - /* 1-->the isr will toggle the VID0 ping-pong buffer */ - int pingpong; - int interpolation_filter; - int field_inversion; - enum osd_h_exp_ratio osd_h_exp; - enum osd_v_exp_ratio osd_v_exp; - enum osd_h_exp_ratio vid_h_exp; - enum osd_v_exp_ratio vid_v_exp; - enum osd_clut backg_clut; - unsigned backg_clut_index; - enum osd_rom_clut rom_clut; - int is_blinking; - /* attribute window blinking enabled */ - enum osd_blink_interval blink; - /* YCbCrI or YCrCbI */ - enum osd_pix_format yc_pixfmt; - /* columns are Y, Cb, Cr */ - unsigned char clut_ram[256][3]; - struct osd_cursor_state cursor; - /* OSD0, VID0, OSD1, VID1 */ - struct osd_window_state win[4]; - /* OSD0, OSD1 */ - struct osd_osdwin_state osdwin[2]; - /* OSD device Operations */ - struct vpbe_osd_ops ops; -}; - -struct osd_platform_data { - int field_inv_wa_enable; -}; - -#endif diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h deleted file mode 100644 index 6015cda235cc..000000000000 --- a/include/media/davinci/vpbe_types.h +++ /dev/null @@ -1,74 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2010 Texas Instruments Inc - */ -#ifndef _VPBE_TYPES_H -#define _VPBE_TYPES_H - -enum vpbe_version { - VPBE_VERSION_1 = 1, - VPBE_VERSION_2, - VPBE_VERSION_3, -}; - -/* vpbe_timing_type - Timing types used in vpbe device */ -enum vpbe_enc_timings_type { - VPBE_ENC_STD = 0x1, - VPBE_ENC_DV_TIMINGS = 0x4, - /* Used when set timings through FB device interface */ - VPBE_ENC_TIMINGS_INVALID = 0x8, -}; - -/* - * struct vpbe_enc_mode_info - * @name: ptr to name string of the standard, "NTSC", "PAL" etc - * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard - * @interlaced: 1 - interlaced, 0 - non interlaced/progressive - * @xres: x or horizontal resolution of the display - * @yres: y or vertical resolution of the display - * @fps: frame per second - * @left_margin: left margin of the display - * @right_margin: right margin of the display - * @upper_margin: upper margin of the display - * @lower_margin: lower margin of the display - * @hsync_len: h-sync length - * @vsync_len: v-sync length - * @flags: bit field: bit usage is documented below - * - * Description: - * Structure holding timing and resolution information of a standard. - * Used by vpbe_device to set required non-standard timing in the - * venc when lcd controller output is connected to a external encoder. - * A table of timings is maintained in vpbe device to set this in - * venc when external encoder is connected to lcd controller output. - * Encoder may provide a g_dv_timings() API to override these values - * as needed. - * - * Notes - * ------ - * if_type should be used only by encoder manager and encoder. - * flags usage - * b0 (LSB) - hsync polarity, 0 - negative, 1 - positive - * b1 - vsync polarity, 0 - negative, 1 - positive - * b2 - field id polarity, 0 - negative, 1 - positive - */ -struct vpbe_enc_mode_info { - unsigned char *name; - enum vpbe_enc_timings_type timings_type; - v4l2_std_id std_id; - struct v4l2_dv_timings dv_timings; - unsigned int interlaced; - unsigned int xres; - unsigned int yres; - struct v4l2_fract aspect; - struct v4l2_fract fps; - unsigned int left_margin; - unsigned int right_margin; - unsigned int upper_margin; - unsigned int lower_margin; - unsigned int hsync_len; - unsigned int vsync_len; - unsigned int flags; -}; - -#endif diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h deleted file mode 100644 index 93cf6a5fb49d..000000000000 --- a/include/media/davinci/vpbe_venc.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2010 Texas Instruments Inc - */ -#ifndef _VPBE_VENC_H -#define _VPBE_VENC_H - -#include <media/v4l2-subdev.h> -#include <media/davinci/vpbe_types.h> - -#define DM644X_VPBE_VENC_SUBDEV_NAME "dm644x,vpbe-venc" -#define DM365_VPBE_VENC_SUBDEV_NAME "dm365,vpbe-venc" -#define DM355_VPBE_VENC_SUBDEV_NAME "dm355,vpbe-venc" - -/* venc events */ -#define VENC_END_OF_FRAME BIT(0) -#define VENC_FIRST_FIELD BIT(1) -#define VENC_SECOND_FIELD BIT(2) - -struct venc_platform_data { - int (*setup_pinmux)(u32 if_type, int field); - int (*setup_clock)(enum vpbe_enc_timings_type type, - unsigned int pixclock); - int (*setup_if_config)(u32 pixcode); - /* Number of LCD outputs supported */ - int num_lcd_outputs; - struct vpbe_if_params *lcd_if_params; -}; - -enum venc_ioctls { - VENC_GET_FLD = 1, -}; - -/* exported functions */ -struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev, - const char *venc_name); -#endif diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h deleted file mode 100644 index 4ad53031e2f7..000000000000 --- a/include/media/davinci/vpfe_capture.h +++ /dev/null @@ -1,177 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - */ - -#ifndef _VPFE_CAPTURE_H -#define _VPFE_CAPTURE_H - -#ifdef __KERNEL__ - -/* Header files */ -#include <media/v4l2-dev.h> -#include <linux/videodev2.h> -#include <linux/clk.h> -#include <linux/i2c.h> -#include <media/v4l2-fh.h> -#include <media/v4l2-ioctl.h> -#include <media/v4l2-device.h> -#include <media/videobuf-dma-contig.h> -#include <media/davinci/vpfe_types.h> - -#define VPFE_CAPTURE_NUM_DECODERS 5 - -/* Macros */ -#define VPFE_MAJOR_RELEASE 0 -#define VPFE_MINOR_RELEASE 0 -#define VPFE_BUILD 1 -#define VPFE_CAPTURE_VERSION_CODE ((VPFE_MAJOR_RELEASE << 16) | \ - (VPFE_MINOR_RELEASE << 8) | \ - VPFE_BUILD) - -#define CAPTURE_DRV_NAME "vpfe-capture" - -struct vpfe_pixel_format { - u32 pixelformat; - /* bytes per pixel */ - int bpp; -}; - -struct vpfe_std_info { - int active_pixels; - int active_lines; - /* current frame format */ - int frame_format; -}; - -struct vpfe_route { - u32 input; - u32 output; -}; - -struct vpfe_subdev_info { - /* Sub device name */ - char name[32]; - /* Sub device group id */ - int grp_id; - /* Number of inputs supported */ - int num_inputs; - /* inputs available at the sub device */ - struct v4l2_input *inputs; - /* Sub dev routing information for each input */ - struct vpfe_route *routes; - /* check if sub dev supports routing */ - int can_route; - /* ccdc bus/interface configuration */ - struct vpfe_hw_if_param ccdc_if_params; - /* i2c subdevice board info */ - struct i2c_board_info board_info; -}; - -struct vpfe_config { - /* Number of sub devices connected to vpfe */ - int num_subdevs; - /* i2c bus adapter no */ - int i2c_adapter_id; - /* information about each subdev */ - struct vpfe_subdev_info *sub_devs; - /* evm card info */ - char *card_name; - /* ccdc name */ - char *ccdc; - /* vpfe clock */ - struct clk *vpssclk; - struct clk *slaveclk; - /* Function for Clearing the interrupt */ - void (*clr_intr)(int vdint); -}; - -struct vpfe_device { - /* V4l2 specific parameters */ - /* Identifies video device for this channel */ - struct video_device video_dev; - /* sub devices */ - struct v4l2_subdev **sd; - /* vpfe cfg */ - struct vpfe_config *cfg; - /* V4l2 device */ - struct v4l2_device v4l2_dev; - /* parent device */ - struct device *pdev; - /* number of open instances of the channel */ - u32 usrs; - /* Indicates id of the field which is being displayed */ - u32 field_id; - /* flag to indicate whether decoder is initialized */ - u8 initialized; - /* current interface type */ - struct vpfe_hw_if_param vpfe_if_params; - /* ptr to currently selected sub device */ - struct vpfe_subdev_info *current_subdev; - /* current input at the sub device */ - int current_input; - /* Keeps track of the information about the standard */ - struct vpfe_std_info std_info; - /* std index into std table */ - int std_index; - /* CCDC IRQs used when CCDC/ISIF output to SDRAM */ - unsigned int ccdc_irq0; - unsigned int ccdc_irq1; - /* number of buffers in fbuffers */ - u32 numbuffers; - /* List of buffer pointers for storing frames */ - u8 *fbuffers[VIDEO_MAX_FRAME]; - /* Pointer pointing to current v4l2_buffer */ - struct videobuf_buffer *cur_frm; - /* Pointer pointing to next v4l2_buffer */ - struct videobuf_buffer *next_frm; - /* - * This field keeps track of type of buffer exchange mechanism - * user has selected - */ - enum v4l2_memory memory; - /* Used to store pixel format */ - struct v4l2_format fmt; - /* - * used when IMP is chained to store the crop window which - * is different from the image window - */ - struct v4l2_rect crop; - /* Buffer queue used in video-buf */ - struct videobuf_queue buffer_queue; - /* Queue of filled frames */ - struct list_head dma_queue; - /* Used in video-buf */ - spinlock_t irqlock; - /* IRQ lock for DMA queue */ - spinlock_t dma_queue_lock; - /* lock used to access this structure */ - struct mutex lock; - /* number of users performing IO */ - u32 io_usrs; - /* Indicates whether streaming started */ - u8 started; - /* - * offset where second field starts from the starting of the - * buffer for field separated YCbCr formats - */ - u32 field_off; -}; - -/* File handle structure */ -struct vpfe_fh { - struct v4l2_fh fh; - struct vpfe_device *vpfe_dev; - /* Indicates whether this file handle is doing IO */ - u8 io_allowed; -}; - -struct vpfe_config_params { - u8 min_numbuffers; - u8 numbuffers; - u32 min_bufsize; - u32 device_bufsize; -}; - -#endif /* End of __KERNEL__ */ -#endif /* _DAVINCI_VPFE_H */ diff --git a/include/media/davinci/vpss.h b/include/media/davinci/vpss.h deleted file mode 100644 index 315fa77e238c..000000000000 --- a/include/media/davinci/vpss.h +++ /dev/null @@ -1,111 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 Texas Instruments Inc - * - * vpss - video processing subsystem module header file. - * - * Include this header file if a driver needs to configure vpss system - * module. It exports a set of library functions for video drivers to - * configure vpss system module functions such as clock enable/disable, - * vpss interrupt mux to arm, and other common vpss system module - * functions. - */ -#ifndef _VPSS_H -#define _VPSS_H - -/* selector for ccdc input selection on DM355 */ -enum vpss_ccdc_source_sel { - VPSS_CCDCIN, - VPSS_HSSIIN, - VPSS_PGLPBK, /* for DM365 only */ - VPSS_CCDCPG /* for DM365 only */ -}; - -struct vpss_sync_pol { - unsigned int ccdpg_hdpol:1; - unsigned int ccdpg_vdpol:1; -}; - -struct vpss_pg_frame_size { - short hlpfr; - short pplen; -}; - -/* Used for enable/disable VPSS Clock */ -enum vpss_clock_sel { - /* DM355/DM365 */ - VPSS_CCDC_CLOCK, - VPSS_IPIPE_CLOCK, - VPSS_H3A_CLOCK, - VPSS_CFALD_CLOCK, - /* - * When using VPSS_VENC_CLOCK_SEL in vpss_enable_clock() api - * following applies:- - * en = 0 selects ENC_CLK - * en = 1 selects ENC_CLK/2 - */ - VPSS_VENC_CLOCK_SEL, - VPSS_VPBE_CLOCK, - /* DM365 only clocks */ - VPSS_IPIPEIF_CLOCK, - VPSS_RSZ_CLOCK, - VPSS_BL_CLOCK, - /* - * When using VPSS_PCLK_INTERNAL in vpss_enable_clock() api - * following applies:- - * en = 0 disable internal PCLK - * en = 1 enables internal PCLK - */ - VPSS_PCLK_INTERNAL, - /* - * When using VPSS_PSYNC_CLOCK_SEL in vpss_enable_clock() api - * following applies:- - * en = 0 enables MMR clock - * en = 1 enables VPSS clock - */ - VPSS_PSYNC_CLOCK_SEL, - VPSS_LDC_CLOCK_SEL, - VPSS_OSD_CLOCK_SEL, - VPSS_FDIF_CLOCK, - VPSS_LDC_CLOCK -}; - -/* select input to ccdc on dm355 */ -int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel); -/* enable/disable a vpss clock, 0 - success, -1 - failure */ -int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en); -/* set sync polarity, only for DM365*/ -void dm365_vpss_set_sync_pol(struct vpss_sync_pol); -/* set the PG_FRAME_SIZE register, only for DM365 */ -void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size); - -/* wbl reset for dm644x */ -enum vpss_wbl_sel { - VPSS_PCR_AEW_WBL_0 = 16, - VPSS_PCR_AF_WBL_0, - VPSS_PCR_RSZ4_WBL_0, - VPSS_PCR_RSZ3_WBL_0, - VPSS_PCR_RSZ2_WBL_0, - VPSS_PCR_RSZ1_WBL_0, - VPSS_PCR_PREV_WBL_0, - VPSS_PCR_CCDC_WBL_O, -}; -/* clear wbl overflow flag for DM6446 */ -int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel); - -/* set sync polarity*/ -void vpss_set_sync_pol(struct vpss_sync_pol sync); -/* set the PG_FRAME_SIZE register */ -void vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size); -/* - * vpss_check_and_clear_interrupt - check and clear interrupt - * @irq - common enumerator for IRQ - * - * Following return values used:- - * 0 - interrupt occurred and cleared - * 1 - interrupt not occurred - * 2 - interrupt status not available - */ -int vpss_dma_complete_interrupt(void); - -#endif diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index b15fa9930f30..f3fe9b6e26d4 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -38,6 +38,7 @@ struct v4l2_subdev; struct v4l2_subdev_fh; struct tuner_setup; struct v4l2_mbus_frame_desc; +struct led_classdev; /** * struct v4l2_decode_vbi_line - used to decode_vbi_line @@ -941,6 +942,7 @@ struct v4l2_subdev_platform_data { * @state_lock: A pointer to a lock used for all the subdev's states, set by the * driver. This is optional. If NULL, each state instance will get * a lock of its own. + * @privacy_led: Optional pointer to a LED classdev for the privacy LED for sensors. * @active_state: Active state for the subdev (NULL for subdevs tracking the * state internally). Initialized by calling * v4l2_subdev_init_finalize(). @@ -982,6 +984,8 @@ struct v4l2_subdev { * appropriate functions. */ + struct led_classdev *privacy_led; + /* * TODO: active_state should most likely be changed from a pointer to an * embedded field. For the time being it's kept as a pointer to more |