diff options
Diffstat (limited to 'include/media/drv-intf/cx25840.h')
| -rw-r--r-- | include/media/drv-intf/cx25840.h | 138 |
1 files changed, 112 insertions, 26 deletions
diff --git a/include/media/drv-intf/cx25840.h b/include/media/drv-intf/cx25840.h index 328ddb359fdf..ba69bc525382 100644 --- a/include/media/drv-intf/cx25840.h +++ b/include/media/drv-intf/cx25840.h @@ -1,25 +1,31 @@ /* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - cx25840.h - definition for cx25840/1/2/3 inputs - - Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) -*/ +/* + * cx25840.h - definition for cx25840/1/2/3 inputs + * + * Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) + */ #ifndef _CX25840_H_ #define _CX25840_H_ -/* Note that the cx25840 driver requires that the bridge driver calls the - v4l2_subdev's init operation in order to load the driver's firmware. - Without this the audio standard detection will fail and you will - only get mono. - - Since loading the firmware is often problematic when the driver is - compiled into the kernel I recommend postponing calling this function - until the first open of the video device. Another reason for - postponing it is that loading this firmware takes a long time (seconds) - due to the slow i2c bus speed. So it will speed up the boot process if - you can avoid loading the fw as long as the video device isn't used. */ +/* + * Note that the cx25840 driver requires that the bridge driver calls the + * v4l2_subdev's load_fw operation in order to load the driver's firmware. + * This will load the firmware on the first invocation (further ones are NOP). + * Without this the audio standard detection will fail and you will + * only get mono. + * Alternatively, you can call the reset operation (this can be done + * multiple times if needed, each invocation will fully reinitialize + * the device). + * + * Since loading the firmware is often problematic when the driver is + * compiled into the kernel I recommend postponing calling this function + * until the first open of the video device. Another reason for + * postponing it is that loading this firmware takes a long time (seconds) + * due to the slow i2c bus speed. So it will speed up the boot process if + * you can avoid loading the fw as long as the video device isn't used. + */ enum cx25840_video_input { /* Composite video inputs In1-In8 */ @@ -32,8 +38,10 @@ enum cx25840_video_input { CX25840_COMPOSITE7, CX25840_COMPOSITE8, - /* S-Video inputs consist of one luma input (In1-In8) ORed with one - chroma input (In5-In8) */ + /* + * S-Video inputs consist of one luma input (In1-In8) ORed with one + * chroma input (In5-In8) + */ CX25840_SVIDEO_LUMA1 = 0x10, CX25840_SVIDEO_LUMA2 = 0x20, CX25840_SVIDEO_LUMA3 = 0x30, @@ -76,6 +84,81 @@ enum cx25840_video_input { CX25840_DIF_ON = 0x80000400, }; +/* + * The defines below are used to set the chip video output settings + * in the generic mode that can be enabled by calling the subdevice + * init core op. + * + * The requested settings can be passed to the init core op as + * @val parameter and to the s_routing video op as @config parameter. + * + * For details please refer to the section 3.7 Video Output Formatting and + * to Video Out Control 1 to 4 registers in the section 5.6 Video Decoder Core + * of the chip datasheet. + */ +#define CX25840_VCONFIG_FMT_SHIFT 0 +#define CX25840_VCONFIG_FMT_MASK GENMASK(2, 0) +#define CX25840_VCONFIG_FMT_BT601 BIT(0) +#define CX25840_VCONFIG_FMT_BT656 BIT(1) +#define CX25840_VCONFIG_FMT_VIP11 GENMASK(1, 0) +#define CX25840_VCONFIG_FMT_VIP2 BIT(2) + +#define CX25840_VCONFIG_RES_SHIFT 3 +#define CX25840_VCONFIG_RES_MASK GENMASK(4, 3) +#define CX25840_VCONFIG_RES_8BIT BIT(3) +#define CX25840_VCONFIG_RES_10BIT BIT(4) + +#define CX25840_VCONFIG_VBIRAW_SHIFT 5 +#define CX25840_VCONFIG_VBIRAW_MASK GENMASK(6, 5) +#define CX25840_VCONFIG_VBIRAW_DISABLED BIT(5) +#define CX25840_VCONFIG_VBIRAW_ENABLED BIT(6) + +#define CX25840_VCONFIG_ANCDATA_SHIFT 7 +#define CX25840_VCONFIG_ANCDATA_MASK GENMASK(8, 7) +#define CX25840_VCONFIG_ANCDATA_DISABLED BIT(7) +#define CX25840_VCONFIG_ANCDATA_ENABLED BIT(8) + +#define CX25840_VCONFIG_TASKBIT_SHIFT 9 +#define CX25840_VCONFIG_TASKBIT_MASK GENMASK(10, 9) +#define CX25840_VCONFIG_TASKBIT_ZERO BIT(9) +#define CX25840_VCONFIG_TASKBIT_ONE BIT(10) + +#define CX25840_VCONFIG_ACTIVE_SHIFT 11 +#define CX25840_VCONFIG_ACTIVE_MASK GENMASK(12, 11) +#define CX25840_VCONFIG_ACTIVE_COMPOSITE BIT(11) +#define CX25840_VCONFIG_ACTIVE_HORIZONTAL BIT(12) + +#define CX25840_VCONFIG_VALID_SHIFT 13 +#define CX25840_VCONFIG_VALID_MASK GENMASK(14, 13) +#define CX25840_VCONFIG_VALID_NORMAL BIT(13) +#define CX25840_VCONFIG_VALID_ANDACTIVE BIT(14) + +#define CX25840_VCONFIG_HRESETW_SHIFT 15 +#define CX25840_VCONFIG_HRESETW_MASK GENMASK(16, 15) +#define CX25840_VCONFIG_HRESETW_NORMAL BIT(15) +#define CX25840_VCONFIG_HRESETW_PIXCLK BIT(16) + +#define CX25840_VCONFIG_CLKGATE_SHIFT 17 +#define CX25840_VCONFIG_CLKGATE_MASK GENMASK(18, 17) +#define CX25840_VCONFIG_CLKGATE_NONE BIT(17) +#define CX25840_VCONFIG_CLKGATE_VALID BIT(18) +#define CX25840_VCONFIG_CLKGATE_VALIDACTIVE GENMASK(18, 17) + +#define CX25840_VCONFIG_DCMODE_SHIFT 19 +#define CX25840_VCONFIG_DCMODE_MASK GENMASK(20, 19) +#define CX25840_VCONFIG_DCMODE_DWORDS BIT(19) +#define CX25840_VCONFIG_DCMODE_BYTES BIT(20) + +#define CX25840_VCONFIG_IDID0S_SHIFT 21 +#define CX25840_VCONFIG_IDID0S_MASK GENMASK(22, 21) +#define CX25840_VCONFIG_IDID0S_NORMAL BIT(21) +#define CX25840_VCONFIG_IDID0S_LINECNT BIT(22) + +#define CX25840_VCONFIG_VIPCLAMP_SHIFT 23 +#define CX25840_VCONFIG_VIPCLAMP_MASK GENMASK(24, 23) +#define CX25840_VCONFIG_VIPCLAMP_ENABLED BIT(23) +#define CX25840_VCONFIG_VIPCLAMP_DISABLED BIT(24) + enum cx25840_audio_input { /* Audio inputs: serial or In4-In8 */ CX25840_AUDIO_SERIAL, @@ -103,7 +186,7 @@ enum cx25840_io_pin { }; enum cx25840_io_pad { - /* Output pads */ + /* Output pads, these must match the actual chip register values */ CX25840_PAD_DEFAULT = 0, CX25840_PAD_ACTIVE, CX25840_PAD_VACTIVE, @@ -162,13 +245,16 @@ enum cx23885_io_pad { CX23885_PAD_GPIO16, }; -/* pvr150_workaround activates a workaround for a hardware bug that is - present in Hauppauge PVR-150 (and possibly PVR-500) cards that have - certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The - audio autodetect fails on some channels for these models and the workaround - is to select the audio standard explicitly. Many thanks to Hauppauge for - providing this information. - This platform data only needs to be supplied by the ivtv driver. */ +/* + * pvr150_workaround activates a workaround for a hardware bug that is + * present in Hauppauge PVR-150 (and possibly PVR-500) cards that have + * certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The + * audio autodetect fails on some channels for these models and the workaround + * is to select the audio standard explicitly. Many thanks to Hauppauge for + * providing this information. + * + * This platform data only needs to be supplied by the ivtv driver. + */ struct cx25840_platform_data { int pvr150_workaround; }; |