1 files changed, 0 insertions, 184 deletions
diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h
deleted file mode 100644
index 646c4b48b29d..000000000000
--- a/include/media/davinci/vpbe.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Texas Instruments Inc
- */
-#ifndef _VPBE_H
-#define _VPBE_H
-
-#include <linux/videodev2.h>
-#include <linux/i2c.h>
-
-#include <media/v4l2-dev.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-device.h>
-#include <media/davinci/vpbe_osd.h>
-#include <media/davinci/vpbe_venc.h>
-#include <media/davinci/vpbe_types.h>
-
-/* OSD configuration info */
-struct osd_config_info {
-	char module_name[32];
-};
-
-struct vpbe_output {
-	struct v4l2_output output;
-	/*
-	 * If output capabilities include dv_timings, list supported timings
-	 * below
-	 */
-	char *subdev_name;
-	/*
-	 * default_mode identifies the default timings set at the venc or
-	 * external encoder.
-	 */
-	char *default_mode;
-	/*
-	 * Fields below are used for supporting multiple modes. For example,
-	 * LCD panel might support different modes and they are listed here.
-	 * Similarly for supporting external encoders, lcd controller port
-	 * requires a set of non-standard timing values to be listed here for
-	 * each supported mode since venc is used in non-standard timing mode
-	 * for interfacing with external encoder similar to configuring lcd
-	 * panel timings
-	 */
-	unsigned int num_modes;
-	struct vpbe_enc_mode_info *modes;
-	/*
-	 * Bus configuration goes here for external encoders. Some encoders
-	 * may require multiple interface types for each of the output. For
-	 * example, SD modes would use YCC8 where as HD mode would use YCC16.
-	 * Not sure if this is needed on a per mode basis instead of per
-	 * output basis. If per mode is needed, we may have to move this to
-	 * mode_info structure
-	 */
-	u32 if_params;
-};
-
-/* encoder configuration info */
-struct encoder_config_info {
-	char module_name[32];
-	/* Is this an i2c device ? */
-	unsigned int is_i2c:1;
-	/* i2c subdevice board info */
-	struct i2c_board_info board_info;
-};
-
-/*amplifier configuration info */
-struct amp_config_info {
-	char module_name[32];
-	/* Is this an i2c device ? */
-	unsigned int is_i2c:1;
-	/* i2c subdevice board info */
-	struct i2c_board_info board_info;
-};
-
-/* structure for defining vpbe display subsystem components */
-struct vpbe_config {
-	char module_name[32];
-	/* i2c bus adapter no */
-	int i2c_adapter_id;
-	struct osd_config_info osd;
-	struct encoder_config_info venc;
-	/* external encoder information goes here */
-	int num_ext_encoders;
-	struct encoder_config_info *ext_encoders;
-	/* amplifier information goes here */
-	struct amp_config_info *amp;
-	unsigned int num_outputs;
-	/* Order is venc outputs followed by LCD and then external encoders */
-	struct vpbe_output *outputs;
-};
-
-struct vpbe_device;
-
-struct vpbe_device_ops {
-	/* Enumerate the outputs */
-	int (*enum_outputs)(struct vpbe_device *vpbe_dev,
-			    struct v4l2_output *output);
-
-	/* Set output to the given index */
-	int (*set_output)(struct vpbe_device *vpbe_dev,
-			 int index);
-
-	/* Get current output */
-	unsigned int (*get_output)(struct vpbe_device *vpbe_dev);
-
-	/* Set DV preset at current output */
-	int (*s_dv_timings)(struct vpbe_device *vpbe_dev,
-			   struct v4l2_dv_timings *dv_timings);
-
-	/* Get DV presets supported at the output */
-	int (*g_dv_timings)(struct vpbe_device *vpbe_dev,
-			   struct v4l2_dv_timings *dv_timings);
-
-	/* Enumerate the DV Presets supported at the output */
-	int (*enum_dv_timings)(struct vpbe_device *vpbe_dev,
-			       struct v4l2_enum_dv_timings *timings_info);
-
-	/* Set std at the output */
-	int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id std_id);
-
-	/* Get the current std at the output */
-	int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
-
-	/* initialize the device */
-	int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev);
-
-	/* De-initialize the device */
-	void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev);
-
-	/* Get the current mode info */
-	int (*get_mode_info)(struct vpbe_device *vpbe_dev,
-			     struct vpbe_enc_mode_info*);
-
-	/*
-	 * Set the current mode in the encoder. Alternate way of setting
-	 * standard or DV preset or custom timings in the encoder
-	 */
-	int (*set_mode)(struct vpbe_device *vpbe_dev,
-			struct vpbe_enc_mode_info*);
-	/* Power management operations */
-	int (*suspend)(struct vpbe_device *vpbe_dev);
-	int (*resume)(struct vpbe_device *vpbe_dev);
-};
-
-/* struct for vpbe device */
-struct vpbe_device {
-	/* V4l2 device */
-	struct v4l2_device v4l2_dev;
-	/* vpbe dispay controller cfg */
-	struct vpbe_config *cfg;
-	/* parent device */
-	struct device *pdev;
-	/* external encoder v4l2 sub devices */
-	struct v4l2_subdev **encoders;
-	/* current encoder index */
-	int current_sd_index;
-	/* external amplifier v4l2 subdevice */
-	struct v4l2_subdev *amp;
-	struct mutex lock;
-	/* device initialized */
-	int initialized;
-	/* vpbe dac clock */
-	struct clk *dac_clk;
-	/* osd_device pointer */
-	struct osd_state *osd_device;
-	/* venc device pointer */
-	struct venc_platform_data *venc_device;
-	/*
-	 * fields below are accessed by users of vpbe_device. Not the
-	 * ones above
-	 */
-
-	/* current output */
-	int current_out_index;
-	/* lock used by caller to do atomic operation on vpbe device */
-	/* current timings set in the controller */
-	struct vpbe_enc_mode_info current_timings;
-	/* venc sub device */
-	struct v4l2_subdev *venc;
-	/* device operations below */
-	struct vpbe_device_ops ops;
-};
-
-#endif