diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/bch.h | 11 | ||||
| -rw-r--r-- | include/linux/mtd/bbm.h | 2 | ||||
| -rw-r--r-- | include/linux/mtd/cfi.h | 6 | ||||
| -rw-r--r-- | include/linux/mtd/mtd.h | 7 | ||||
| -rw-r--r-- | include/linux/mtd/partitions.h | 2 | ||||
| -rw-r--r-- | include/linux/mtd/qinfo.h | 2 | ||||
| -rw-r--r-- | include/linux/mtd/rawnand.h | 131 | ||||
| -rw-r--r-- | include/linux/mtd/spi-nor.h | 24 | ||||
| -rw-r--r-- | include/linux/platform_data/mtd-davinci.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/mtd-nand-s3c2410.h | 2 |
10 files changed, 111 insertions, 78 deletions
diff --git a/include/linux/bch.h b/include/linux/bch.h index aa765af85c38..85fdce83d4e2 100644 --- a/include/linux/bch.h +++ b/include/linux/bch.h @@ -33,6 +33,7 @@ * @cache: log-based polynomial representation buffer * @elp: error locator polynomial * @poly_2t: temporary polynomials of degree 2t + * @swap_bits: swap bits within data and syndrome bytes */ struct bch_control { unsigned int m; @@ -51,16 +52,18 @@ struct bch_control { int *cache; struct gf_poly *elp; struct gf_poly *poly_2t[4]; + bool swap_bits; }; -struct bch_control *init_bch(int m, int t, unsigned int prim_poly); +struct bch_control *bch_init(int m, int t, unsigned int prim_poly, + bool swap_bits); -void free_bch(struct bch_control *bch); +void bch_free(struct bch_control *bch); -void encode_bch(struct bch_control *bch, const uint8_t *data, +void bch_encode(struct bch_control *bch, const uint8_t *data, unsigned int len, uint8_t *ecc); -int decode_bch(struct bch_control *bch, const uint8_t *data, unsigned int len, +int bch_decode(struct bch_control *bch, const uint8_t *data, unsigned int len, const uint8_t *recv_ecc, const uint8_t *calc_ecc, const unsigned int *syn, unsigned int *errloc); diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h index 886e30441c90..d890805f5494 100644 --- a/include/linux/mtd/bbm.h +++ b/include/linux/mtd/bbm.h @@ -98,7 +98,7 @@ struct nand_bbt_descr { /* * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr - * was allocated dynamicaly and must be freed in nand_release(). Has no meaning + * was allocated dynamicaly and must be freed in nand_cleanup(). Has no meaning * in nand_chip.bbt_options. */ #define NAND_BBT_DYNAMICSTRUCT 0x80000000 diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index c98a21108688..fd1ecb821106 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -138,7 +138,7 @@ struct cfi_ident { uint16_t InterfaceDesc; uint16_t MaxBufWriteSize; uint8_t NumEraseRegions; - uint32_t EraseRegionInfo[0]; /* Not host ordered */ + uint32_t EraseRegionInfo[]; /* Not host ordered */ } __packed; /* Extended Query Structure for both PRI and ALT */ @@ -165,7 +165,7 @@ struct cfi_pri_intelext { uint16_t ProtRegAddr; uint8_t FactProtRegSize; uint8_t UserProtRegSize; - uint8_t extra[0]; + uint8_t extra[]; } __packed; struct cfi_intelext_otpinfo { @@ -286,7 +286,7 @@ struct cfi_private { map_word sector_erase_cmd; unsigned long chipshift; /* Because they're of the same type */ const char *im_name; /* inter_module name for cmdset_setup */ - struct flchip chips[0]; /* per-chip data structure for each chip */ + struct flchip chips[]; /* per-chip data structure for each chip */ }; uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 2d1f4a61f4ac..157357ec1441 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -200,6 +200,8 @@ struct mtd_debug_info { * * @node: list node used to add an MTD partition to the parent partition list * @offset: offset of the partition relatively to the parent offset + * @size: partition size. Should be equal to mtd->size unless + * MTD_SLC_ON_MLC_EMULATION is set * @flags: original flags (before the mtdpart logic decided to tweak them based * on flash constraints, like eraseblock/pagesize alignment) * @@ -209,6 +211,7 @@ struct mtd_debug_info { struct mtd_part { struct list_head node; u64 offset; + u64 size; u32 flags; }; @@ -622,7 +625,9 @@ static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd) static inline int mtd_wunit_per_eb(struct mtd_info *mtd) { - return mtd->erasesize / mtd->writesize; + struct mtd_info *master = mtd_get_master(mtd); + + return master->erasesize / mtd->writesize; } static inline int mtd_offset_to_wunit(struct mtd_info *mtd, loff_t offs) diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index e545c050d3e8..b74a539ec581 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -37,6 +37,7 @@ * master MTD flag set for the corresponding MTD partition. * For example, to force a read-only partition, simply adding * MTD_WRITEABLE to the mask_flags will do the trick. + * add_flags: contains flags to add to the parent flags * * Note: writeable partitions require their size and offset be * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK). @@ -48,6 +49,7 @@ struct mtd_partition { uint64_t size; /* partition size */ uint64_t offset; /* offset within the master MTD space */ uint32_t mask_flags; /* master MTD flags to mask out for this partition */ + uint32_t add_flags; /* flags to add to the partition */ struct device_node *of_node; }; diff --git a/include/linux/mtd/qinfo.h b/include/linux/mtd/qinfo.h index df5b9fddea16..2e3f43788d48 100644 --- a/include/linux/mtd/qinfo.h +++ b/include/linux/mtd/qinfo.h @@ -24,7 +24,7 @@ struct lpddr_private { struct qinfo_chip *qinfo; int numchips; unsigned long chipshift; - struct flchip chips[0]; + struct flchip chips[]; }; /* qinfo_query_info structure contains request information for diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index 1e76196f9829..65b1c1c18b41 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -83,14 +83,14 @@ struct nand_chip; /* * Constants for ECC_MODES */ -typedef enum { +enum nand_ecc_mode { + NAND_ECC_INVALID, NAND_ECC_NONE, NAND_ECC_SOFT, NAND_ECC_HW, NAND_ECC_HW_SYNDROME, - NAND_ECC_HW_OOB_FIRST, NAND_ECC_ON_DIE, -} nand_ecc_modes_t; +}; enum nand_ecc_algo { NAND_ECC_UNKNOWN, @@ -119,85 +119,73 @@ enum nand_ecc_algo { #define NAND_ECC_MAXIMIZE BIT(1) /* + * Option constants for bizarre disfunctionality and real + * features. + */ + +/* Buswidth is 16 bit */ +#define NAND_BUSWIDTH_16 BIT(1) + +/* * When using software implementation of Hamming, we can specify which byte * ordering should be used. */ #define NAND_ECC_SOFT_HAMMING_SM_ORDER BIT(2) -/* - * Option constants for bizarre disfunctionality and real - * features. - */ -/* Buswidth is 16 bit */ -#define NAND_BUSWIDTH_16 0x00000002 /* Chip has cache program function */ -#define NAND_CACHEPRG 0x00000008 +#define NAND_CACHEPRG BIT(3) +/* Options valid for Samsung large page devices */ +#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG + /* * Chip requires ready check on read (for auto-incremented sequential read). * True only for small page devices; large page devices do not support * autoincrement. */ -#define NAND_NEED_READRDY 0x00000100 +#define NAND_NEED_READRDY BIT(8) /* Chip does not allow subpage writes */ -#define NAND_NO_SUBPAGE_WRITE 0x00000200 +#define NAND_NO_SUBPAGE_WRITE BIT(9) /* Device is one of 'new' xD cards that expose fake nand command set */ -#define NAND_BROKEN_XD 0x00000400 +#define NAND_BROKEN_XD BIT(10) /* Device behaves just like nand, but is readonly */ -#define NAND_ROM 0x00000800 +#define NAND_ROM BIT(11) /* Device supports subpage reads */ -#define NAND_SUBPAGE_READ 0x00001000 +#define NAND_SUBPAGE_READ BIT(12) +/* Macros to identify the above */ +#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ)) /* * Some MLC NANDs need data scrambling to limit bitflips caused by repeated * patterns. */ -#define NAND_NEED_SCRAMBLING 0x00002000 +#define NAND_NEED_SCRAMBLING BIT(13) /* Device needs 3rd row address cycle */ -#define NAND_ROW_ADDR_3 0x00004000 - -/* Options valid for Samsung large page devices */ -#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG - -/* Macros to identify the above */ -#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ)) - -/* - * There are different places where the manufacturer stores the factory bad - * block markers. - * - * Position within the block: Each of these pages needs to be checked for a - * bad block marking pattern. - */ -#define NAND_BBM_FIRSTPAGE 0x01000000 -#define NAND_BBM_SECONDPAGE 0x02000000 -#define NAND_BBM_LASTPAGE 0x04000000 - -/* Position within the OOB data of the page */ -#define NAND_BBM_POS_SMALL 5 -#define NAND_BBM_POS_LARGE 0 +#define NAND_ROW_ADDR_3 BIT(14) /* Non chip related options */ /* This option skips the bbt scan during initialization. */ -#define NAND_SKIP_BBTSCAN 0x00010000 +#define NAND_SKIP_BBTSCAN BIT(16) /* Chip may not exist, so silence any errors in scan */ -#define NAND_SCAN_SILENT_NODEV 0x00040000 +#define NAND_SCAN_SILENT_NODEV BIT(18) + /* * Autodetect nand buswidth with readid/onfi. * This suppose the driver will configure the hardware in 8 bits mode * when calling nand_scan_ident, and update its configuration * before calling nand_scan_tail. */ -#define NAND_BUSWIDTH_AUTO 0x00080000 +#define NAND_BUSWIDTH_AUTO BIT(19) + /* * This option could be defined by controller drivers to protect against * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers */ -#define NAND_USE_BOUNCE_BUFFER 0x00100000 +#define NAND_USES_DMA BIT(20) /* * In case your controller is implementing ->legacy.cmd_ctrl() and is relying @@ -207,26 +195,49 @@ enum nand_ecc_algo { * If your controller already takes care of this delay, you don't need to set * this flag. */ -#define NAND_WAIT_TCCS 0x00200000 +#define NAND_WAIT_TCCS BIT(21) /* * Whether the NAND chip is a boot medium. Drivers might use this information * to select ECC algorithms supported by the boot ROM or similar restrictions. */ -#define NAND_IS_BOOT_MEDIUM 0x00400000 +#define NAND_IS_BOOT_MEDIUM BIT(22) /* * Do not try to tweak the timings at runtime. This is needed when the * controller initializes the timings on itself or when it relies on * configuration done by the bootloader. */ -#define NAND_KEEP_TIMINGS 0x00800000 +#define NAND_KEEP_TIMINGS BIT(23) + +/* + * There are different places where the manufacturer stores the factory bad + * block markers. + * + * Position within the block: Each of these pages needs to be checked for a + * bad block marking pattern. + */ +#define NAND_BBM_FIRSTPAGE BIT(24) +#define NAND_BBM_SECONDPAGE BIT(25) +#define NAND_BBM_LASTPAGE BIT(26) + +/* + * Some controllers with pipelined ECC engines override the BBM marker with + * data or ECC bytes, thus making bad block detection through bad block marker + * impossible. Let's flag those chips so the core knows it shouldn't check the + * BBM and consider all blocks good. + */ +#define NAND_NO_BBM_QUIRK BIT(27) /* Cell info constants */ #define NAND_CI_CHIPNR_MSK 0x03 #define NAND_CI_CELLTYPE_MSK 0x0C #define NAND_CI_CELLTYPE_SHIFT 2 +/* Position within the OOB data of the page */ +#define NAND_BBM_POS_SMALL 5 +#define NAND_BBM_POS_LARGE 0 + /** * struct nand_parameters - NAND generic parameters from the parameter page * @model: Model name @@ -351,7 +362,7 @@ static const struct nand_ecc_caps __name = { \ * @write_oob: function to write chip OOB data */ struct nand_ecc_ctrl { - nand_ecc_modes_t mode; + enum nand_ecc_mode mode; enum nand_ecc_algo algo; int steps; int size; @@ -491,13 +502,17 @@ enum nand_data_interface_type { /** * struct nand_data_interface - NAND interface timing * @type: type of the timing - * @timings: The timing, type according to @type + * @timings: The timing information + * @timings.mode: Timing mode as defined in the specification * @timings.sdr: Use it when @type is %NAND_SDR_IFACE. */ struct nand_data_interface { enum nand_data_interface_type type; - union { - struct nand_sdr_timings sdr; + struct nand_timings { + unsigned int mode; + union { + struct nand_sdr_timings sdr; + }; } timings; }; @@ -694,6 +709,7 @@ struct nand_op_instr { /** * struct nand_subop - a sub operation + * @cs: the CS line to select for this NAND sub-operation * @instrs: array of instructions * @ninstrs: length of the @instrs array * @first_instr_start_off: offset to start from for the first instruction @@ -709,6 +725,7 @@ struct nand_op_instr { * controller driver. */ struct nand_subop { + unsigned int cs; const struct nand_op_instr *instrs; unsigned int ninstrs; unsigned int first_instr_start_off; @@ -1321,13 +1338,17 @@ int nand_read_oob_std(struct nand_chip *chip, int page); int nand_get_set_features_notsupp(struct nand_chip *chip, int addr, u8 *subfeature_param); -/* Default read_page_raw implementation */ +/* read_page_raw implementations */ int nand_read_page_raw(struct nand_chip *chip, uint8_t *buf, int oob_required, int page); +int nand_monolithic_read_page_raw(struct nand_chip *chip, uint8_t *buf, + int oob_required, int page); -/* Default write_page_raw implementation */ +/* write_page_raw implementations */ int nand_write_page_raw(struct nand_chip *chip, const uint8_t *buf, int oob_required, int page); +int nand_monolithic_write_page_raw(struct nand_chip *chip, const uint8_t *buf, + int oob_required, int page); /* Reset and initialize a NAND device */ int nand_reset(struct nand_chip *chip, int chipnr); @@ -1356,7 +1377,7 @@ int nand_change_write_column_op(struct nand_chip *chip, unsigned int offset_in_page, const void *buf, unsigned int len, bool force_8bit); int nand_read_data_op(struct nand_chip *chip, void *buf, unsigned int len, - bool force_8bit); + bool force_8bit, bool check_only); int nand_write_data_op(struct nand_chip *chip, const void *buf, unsigned int len, bool force_8bit); @@ -1377,8 +1398,6 @@ void nand_wait_ready(struct nand_chip *chip); * sucessful nand_scan(). */ void nand_cleanup(struct nand_chip *chip); -/* Unregister the MTD device and calls nand_cleanup() */ -void nand_release(struct nand_chip *chip); /* * External helper for controller drivers that have to implement the WAITRDY @@ -1393,6 +1412,10 @@ int nand_gpio_waitrdy(struct nand_chip *chip, struct gpio_desc *gpiod, void nand_select_target(struct nand_chip *chip, unsigned int cs); void nand_deselect_target(struct nand_chip *chip); +/* Bitops */ +void nand_extract_bits(u8 *dst, unsigned int dst_off, const u8 *src, + unsigned int src_off, unsigned int nbits); + /** * nand_get_data_buf() - Get the internal page buffer * @chip: NAND chip object diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 1e2af0ec1f03..60bac2c0ec45 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -20,6 +20,7 @@ */ /* Flash opcodes. */ +#define SPINOR_OP_WRDI 0x04 /* Write disable */ #define SPINOR_OP_WREN 0x06 /* Write enable */ #define SPINOR_OP_RDSR 0x05 /* Read status register */ #define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */ @@ -80,7 +81,6 @@ /* Used for SST flashes only. */ #define SPINOR_OP_BP 0x02 /* Byte program */ -#define SPINOR_OP_WRDI 0x04 /* Write disable */ #define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */ /* Used for S3AN flashes only */ @@ -302,7 +302,7 @@ struct spi_nor; * @read: read data from the SPI NOR. * @write: write data to the SPI NOR. * @erase: erase a sector of the SPI NOR at the offset @offs; if - * not provided by the driver, spi-nor will send the erase + * not provided by the driver, SPI NOR will send the erase * opcode via write_reg(). */ struct spi_nor_controller_ops { @@ -327,16 +327,16 @@ struct spi_nor_manufacturer; struct spi_nor_flash_parameter; /** - * struct spi_nor - Structure for defining a the SPI NOR layer - * @mtd: point to a mtd_info structure + * struct spi_nor - Structure for defining the SPI NOR layer + * @mtd: an mtd_info structure * @lock: the lock for the read/write/erase/lock/unlock operations - * @dev: point to a spi device, or a spi nor controller device. - * @spimem: point to the spi mem device + * @dev: pointer to an SPI device or an SPI NOR controller device + * @spimem: pointer to the SPI memory device * @bouncebuf: bounce buffer used when the buffer passed by the MTD * layer is not DMA-able * @bouncebuf_size: size of the bounce buffer - * @info: spi-nor part JDEC MFR id and other info - * @manufacturer: spi-nor manufacturer + * @info: SPI NOR part JEDEC MFR ID and other info + * @manufacturer: SPI NOR manufacturer * @page_size: the page size of the SPI NOR * @addr_width: number of address bytes * @erase_opcode: the opcode for erasing a sector @@ -344,17 +344,17 @@ struct spi_nor_flash_parameter; * @read_dummy: the dummy needed by the read operation * @program_opcode: the program opcode * @sst_write_second: used by the SST write operation - * @flags: flag options for the current SPI-NOR (SNOR_F_*) + * @flags: flag options for the current SPI NOR (SNOR_F_*) * @read_proto: the SPI protocol for read operations * @write_proto: the SPI protocol for write operations - * @reg_proto the SPI protocol for read_reg/write_reg/erase operations + * @reg_proto: the SPI protocol for read_reg/write_reg/erase operations * @controller_ops: SPI NOR controller driver specific operations. - * @params: [FLASH-SPECIFIC] SPI-NOR flash parameters and settings. + * @params: [FLASH-SPECIFIC] SPI NOR flash parameters and settings. * The structure includes legacy flash parameters and * settings that can be overwritten by the spi_nor_fixups * hooks, or dynamically when parsing the SFDP tables. * @dirmap: pointers to struct spi_mem_dirmap_desc for reads/writes. - * @priv: the private data + * @priv: pointer to the private data */ struct spi_nor { struct mtd_info mtd; diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h index 08e639e047e5..03e92c71b3fa 100644 --- a/include/linux/platform_data/mtd-davinci.h +++ b/include/linux/platform_data/mtd-davinci.h @@ -68,7 +68,7 @@ struct davinci_nand_pdata { /* platform_data */ * Newer ones also support 4-bit ECC, but are awkward * using it with large page chips. */ - nand_ecc_modes_t ecc_mode; + enum nand_ecc_mode ecc_mode; u8 ecc_bits; /* e.g. NAND_BUSWIDTH_16 */ diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h index deb849bcf0ec..08675b16f9e1 100644 --- a/include/linux/platform_data/mtd-nand-s3c2410.h +++ b/include/linux/platform_data/mtd-nand-s3c2410.h @@ -49,7 +49,7 @@ struct s3c2410_platform_nand { unsigned int ignore_unset_ecc:1; - nand_ecc_modes_t ecc_mode; + enum nand_ecc_mode ecc_mode; int nr_sets; struct s3c2410_nand_set *sets; |