diff options
Diffstat (limited to 'include/linux')
252 files changed, 6190 insertions, 1239 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild index a25555381097..a4b5da2b83f5 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -357,6 +357,7 @@ header-y += suspend_ioctls.h header-y += swab.h header-y += synclink.h header-y += sysctl.h +header-y += sysinfo.h header-y += taskstats.h header-y += tcp.h header-y += telephony.h diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 3f968665899b..f53fea61f40a 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -151,6 +151,7 @@ extern int ec_write(u8 addr, u8 val); extern int ec_transaction(u8 command, const u8 *wdata, unsigned wdata_len, u8 *rdata, unsigned rdata_len); +extern acpi_handle ec_get_handle(void); #if defined(CONFIG_ACPI_WMI) || defined(CONFIG_ACPI_WMI_MODULE) diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h index 2c8731664180..86fa7a71336a 100644 --- a/include/linux/aio_abi.h +++ b/include/linux/aio_abi.h @@ -30,7 +30,7 @@ #include <linux/types.h> #include <asm/byteorder.h> -typedef unsigned long aio_context_t; +typedef __kernel_ulong_t aio_context_t; enum { IOCB_CMD_PREAD = 0, diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 724c69c40bb8..7847e197730a 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -60,6 +60,9 @@ extern struct bus_type amba_bustype; int amba_driver_register(struct amba_driver *); void amba_driver_unregister(struct amba_driver *); +struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t); +void amba_device_put(struct amba_device *); +int amba_device_add(struct amba_device *, struct resource *); int amba_device_register(struct amba_device *, struct resource *); void amba_device_unregister(struct amba_device *); struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int); @@ -89,4 +92,46 @@ void amba_release_regions(struct amba_device *); #define amba_manf(d) AMBA_MANF_BITS((d)->periphid) #define amba_part(d) AMBA_PART_BITS((d)->periphid) +#define __AMBA_DEV(busid, data, mask) \ + { \ + .coherent_dma_mask = mask, \ + .init_name = busid, \ + .platform_data = data, \ + } + +/* + * APB devices do not themselves have the ability to address memory, + * so DMA masks should be zero (much like USB peripheral devices.) + * The DMA controller DMA masks should be used instead (much like + * USB host controllers in conventional PCs.) + */ +#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \ +struct amba_device name##_device = { \ + .dev = __AMBA_DEV(busid, data, 0), \ + .res = DEFINE_RES_MEM(base, SZ_4K), \ + .irq = irqs, \ + .periphid = id, \ +} + +/* + * AHB devices are DMA capable, so set their DMA masks + */ +#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \ +struct amba_device name##_device = { \ + .dev = __AMBA_DEV(busid, data, ~0ULL), \ + .res = DEFINE_RES_MEM(base, SZ_4K), \ + .dma_mask = ~0ULL, \ + .irq = irqs, \ + .periphid = id, \ +} + +/* + * module_amba_driver() - Helper macro for drivers that don't do anything + * special in module init/exit. This eliminates a lot of boilerplate. Each + * module may only use this macro once, and calling it replaces module_init() + * and module_exit() + */ +#define module_amba_driver(__amba_drv) \ + module_driver(__amba_drv, amba_driver_register, amba_driver_unregister) + #endif diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index 0101e9c17fa1..32a89cf5ec45 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -6,6 +6,19 @@ #include <linux/mmc/host.h> + +/* + * These defines is places here due to access is needed from machine + * configuration files. The ST Micro version does not have ROD and + * reuse the voltage registers for direction settings. + */ +#define MCI_ST_DATA2DIREN (1 << 2) +#define MCI_ST_CMDDIREN (1 << 3) +#define MCI_ST_DATA0DIREN (1 << 4) +#define MCI_ST_DATA31DIREN (1 << 5) +#define MCI_ST_FBCLKEN (1 << 7) +#define MCI_ST_DATA74DIREN (1 << 8) + /* Just some dummy forwarding */ struct dma_chan; @@ -18,7 +31,8 @@ struct dma_chan; * @ocr_mask: available voltages on the 4 pins from the block, this * is ignored if a regulator is used, see the MMC_VDD_* masks in * mmc/host.h - * @vdd_handler: a callback function to translate a MMC_VDD_* + * @ios_handler: a callback function to act on specfic ios changes, + * used for example to control a levelshifter * mask into a value to be binary (or set some other custom bits * in MMCIPWR) or:ed and written into the MMCIPWR register of the * block. May also control external power based on the power_mode. @@ -31,6 +45,8 @@ struct dma_chan; * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h * @capabilities2: more capabilities, MMC_CAP2_* from mmc/host.h + * @sigdir: a bit field indicating for what bits in the MMC bus the host + * should enable signal direction indication. * @dma_filter: function used to select an appropriate RX and TX * DMA channel to be used for DMA, if and only if you're deploying the * generic DMA engine @@ -46,14 +62,14 @@ struct dma_chan; struct mmci_platform_data { unsigned int f_max; unsigned int ocr_mask; - u32 (*vdd_handler)(struct device *, unsigned int vdd, - unsigned char power_mode); + int (*ios_handler)(struct device *, struct mmc_ios *); unsigned int (*status)(struct device *); int gpio_wp; int gpio_cd; bool cd_invert; unsigned long capabilities; unsigned long capabilities2; + u32 sigdir; bool (*dma_filter)(struct dma_chan *chan, void *filter_param); void *dma_rx_param; void *dma_tx_param; diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index 3672f40f3455..b8c51124ed19 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -25,8 +25,6 @@ #ifndef _SSP_PL022_H #define _SSP_PL022_H -#include <linux/device.h> - /** * whether SSP is in loopback mode or not */ diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 033f6aa670de..e64ce2cfee99 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -47,9 +47,6 @@ enum { * @muxval: a number usually used to poke into some mux regiser to * mux in the signal to this channel * @cctl_opt: default options for the channel control register - * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave - * channels. Fill with 'true' if peripheral should be flow controller. Direction - * will be selected at Runtime. * @addr: source/target address in physical memory for this DMA channel, * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring @@ -68,7 +65,6 @@ struct pl08x_channel_data { int max_signal; u32 muxval; u32 cctl; - bool device_fc; dma_addr_t addr; bool circular_buffer; bool single; @@ -176,13 +172,15 @@ enum pl08x_dma_chan_state { * @runtime_addr: address for RX/TX according to the runtime config * @runtime_direction: current direction of this channel according to * runtime config - * @lc: last completed transaction on this channel * @pend_list: queued transactions pending on this channel * @at: active transaction on this channel * @lock: a lock for this channel data * @host: a pointer to the host (internal use) * @state: whether the channel is idle, paused, running etc * @slave: whether this channel is a device (slave) or for memcpy + * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave + * channels. Fill with 'true' if peripheral should be flow controller. Direction + * will be selected at Runtime. * @waiting: a TX descriptor on this channel which is waiting for a physical * channel to become available */ @@ -198,13 +196,13 @@ struct pl08x_dma_chan { u32 src_cctl; u32 dst_cctl; enum dma_transfer_direction runtime_direction; - dma_cookie_t lc; struct list_head pend_list; struct pl08x_txd *at; spinlock_t lock; struct pl08x_driver_data *host; enum pl08x_dma_chan_state state; bool slave; + bool device_fc; struct pl08x_txd *waiting; }; diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h index 12e023c19ac1..fe93758e8403 100644 --- a/include/linux/amba/pl330.h +++ b/include/linux/amba/pl330.h @@ -13,7 +13,6 @@ #define __AMBA_PL330_H_ #include <linux/dmaengine.h> -#include <asm/hardware/pl330.h> struct dma_pl330_platdata { /* diff --git a/include/linux/amd-iommu.h b/include/linux/amd-iommu.h index ef00610837d4..15f6b9edd0b1 100644 --- a/include/linux/amd-iommu.h +++ b/include/linux/amd-iommu.h @@ -28,7 +28,7 @@ struct task_struct; struct pci_dev; extern int amd_iommu_detect(void); - +extern int amd_iommu_init_hardware(void); /** * amd_iommu_enable_device_erratum() - Enable erratum workaround for device diff --git a/include/linux/apple_bl.h b/include/linux/apple_bl.h new file mode 100644 index 000000000000..47bedc0eee69 --- /dev/null +++ b/include/linux/apple_bl.h @@ -0,0 +1,26 @@ +/* + * apple_bl exported symbols + */ + +#ifndef _LINUX_APPLE_BL_H +#define _LINUX_APPLE_BL_H + +#ifdef CONFIG_BACKLIGHT_APPLE + +extern int apple_bl_register(void); +extern void apple_bl_unregister(void); + +#else /* !CONFIG_BACKLIGHT_APPLE */ + +static inline int apple_bl_register(void) +{ + return 0; +} + +static inline void apple_bl_unregister(void) +{ +} + +#endif /* !CONFIG_BACKLIGHT_APPLE */ + +#endif /* _LINUX_APPLE_BL_H */ diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index f4ff882cb2da..06fd4bbc58f6 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -213,10 +213,10 @@ struct atm_cirange { #ifdef __KERNEL__ -#include <linux/device.h> #include <linux/wait.h> /* wait_queue_head_t */ #include <linux/time.h> /* struct timeval */ #include <linux/net.h> +#include <linux/bug.h> #include <linux/skbuff.h> /* struct sk_buff */ #include <linux/uio.h> #include <net/sock.h> @@ -249,6 +249,7 @@ struct k_atm_dev_stats { struct k_atm_aal_stats aal5; }; +struct device; enum { ATM_VF_ADDR, /* Address is in use. Set by anybody, cleared diff --git a/include/linux/atmel_tc.h b/include/linux/atmel_tc.h index 53ba65e30caa..1d14b1dc1aee 100644 --- a/include/linux/atmel_tc.h +++ b/include/linux/atmel_tc.h @@ -34,10 +34,19 @@ struct clk; /** + * struct atmel_tcb_config - SoC data for a Timer/Counter Block + * @counter_width: size in bits of a timer counter register + */ +struct atmel_tcb_config { + size_t counter_width; +}; + +/** * struct atmel_tc - information about a Timer/Counter Block * @pdev: physical device * @iomem: resource associated with the I/O register * @regs: mapping through which the I/O registers can be accessed + * @tcb_config: configuration data from SoC * @irq: irq for each of the three channels * @clk: internal clock source for each of the three channels * @node: list node, for tclib internal use @@ -54,6 +63,7 @@ struct atmel_tc { struct platform_device *pdev; struct resource *iomem; void __iomem *regs; + struct atmel_tcb_config *tcb_config; int irq[3]; struct clk *clk[3]; struct list_head node; diff --git a/include/linux/attribute_container.h b/include/linux/attribute_container.h index c3ab81428c66..896c6892f327 100644 --- a/include/linux/attribute_container.h +++ b/include/linux/attribute_container.h @@ -9,10 +9,11 @@ #ifndef _ATTRIBUTE_CONTAINER_H_ #define _ATTRIBUTE_CONTAINER_H_ -#include <linux/device.h> #include <linux/list.h> #include <linux/klist.h> +struct device; + struct attribute_container { struct list_head node; struct klist containers; diff --git a/include/linux/bio.h b/include/linux/bio.h index de5422a57511..4d94eb8bcbcc 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -23,6 +23,7 @@ #include <linux/highmem.h> #include <linux/mempool.h> #include <linux/ioprio.h> +#include <linux/bug.h> #ifdef CONFIG_BLOCK diff --git a/include/linux/bit_spinlock.h b/include/linux/bit_spinlock.h index ac4d9f8b52e9..3b5bafce4337 100644 --- a/include/linux/bit_spinlock.h +++ b/include/linux/bit_spinlock.h @@ -4,6 +4,7 @@ #include <linux/kernel.h> #include <linux/preempt.h> #include <linux/atomic.h> +#include <linux/bug.h> /* * bit-based spin_lock() diff --git a/include/linux/bitops.h b/include/linux/bitops.h index 94300fe46cce..a3b6b82108b9 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -27,11 +27,22 @@ extern unsigned long __sw_hweight64(__u64 w); (bit) = find_next_bit((addr), (size), (bit) + 1)) /* same as for_each_set_bit() but use bit as value to start with */ -#define for_each_set_bit_cont(bit, addr, size) \ +#define for_each_set_bit_from(bit, addr, size) \ for ((bit) = find_next_bit((addr), (size), (bit)); \ (bit) < (size); \ (bit) = find_next_bit((addr), (size), (bit) + 1)) +#define for_each_clear_bit(bit, addr, size) \ + for ((bit) = find_first_zero_bit((addr), (size)); \ + (bit) < (size); \ + (bit) = find_next_zero_bit((addr), (size), (bit) + 1)) + +/* same as for_each_clear_bit() but use bit as value to start with */ +#define for_each_clear_bit_from(bit, addr, size) \ + for ((bit) = find_next_zero_bit((addr), (size), (bit)); \ + (bit) < (size); \ + (bit) = find_next_zero_bit((addr), (size), (bit) + 1)) + static __inline__ int get_bitmask_order(unsigned int count) { int order; diff --git a/include/linux/bug.h b/include/linux/bug.h index d276b5510c83..72961c39576a 100644 --- a/include/linux/bug.h +++ b/include/linux/bug.h @@ -11,6 +11,67 @@ enum bug_trap_type { struct pt_regs; +#ifdef __CHECKER__ +#define BUILD_BUG_ON_NOT_POWER_OF_2(n) +#define BUILD_BUG_ON_ZERO(e) (0) +#define BUILD_BUG_ON_NULL(e) ((void*)0) +#define BUILD_BUG_ON(condition) +#define BUILD_BUG() (0) +#else /* __CHECKER__ */ + +/* Force a compilation error if a constant expression is not a power of 2 */ +#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \ + BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0)) + +/* Force a compilation error if condition is true, but also produce a + result (of value 0 and type size_t), so the expression can be used + e.g. in a structure initializer (or where-ever else comma expressions + aren't permitted). */ +#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) +#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); })) + +/** + * BUILD_BUG_ON - break compile if a condition is true. + * @condition: the condition which the compiler should know is false. + * + * If you have some code which relies on certain constants being equal, or + * other compile-time-evaluated condition, you should use BUILD_BUG_ON to + * detect if someone changes it. + * + * The implementation uses gcc's reluctance to create a negative array, but + * gcc (as of 4.4) only emits that error for obvious cases (eg. not arguments + * to inline functions). So as a fallback we use the optimizer; if it can't + * prove the condition is false, it will cause a link error on the undefined + * "__build_bug_on_failed". This error message can be harder to track down + * though, hence the two different methods. + */ +#ifndef __OPTIMIZE__ +#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) +#else +extern int __build_bug_on_failed; +#define BUILD_BUG_ON(condition) \ + do { \ + ((void)sizeof(char[1 - 2*!!(condition)])); \ + if (condition) __build_bug_on_failed = 1; \ + } while(0) +#endif + +/** + * BUILD_BUG - break compile if used. + * + * If you have some code that you expect the compiler to eliminate at + * build time, you should use BUILD_BUG to detect if it is + * unexpectedly used. + */ +#define BUILD_BUG() \ + do { \ + extern void __build_bug_failed(void) \ + __linktime_error("BUILD_BUG failed"); \ + __build_bug_failed(); \ + } while (0) + +#endif /* __CHECKER__ */ + #ifdef CONFIG_GENERIC_BUG #include <asm-generic/bug.h> diff --git a/include/linux/c2port.h b/include/linux/c2port.h index a2f7d7413f30..4efabcb51347 100644 --- a/include/linux/c2port.h +++ b/include/linux/c2port.h @@ -9,11 +9,12 @@ * the Free Software Foundation */ -#include <linux/device.h> #include <linux/kmemcheck.h> #define C2PORT_NAME_LEN 32 +struct device; + /* * C2 port basic structs */ diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index 7c48029dffe6..dfd7f187c351 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -910,7 +910,6 @@ struct mode_page_header { #ifdef __KERNEL__ #include <linux/fs.h> /* not really needed, later.. */ -#include <linux/device.h> #include <linux/list.h> struct packet_command diff --git a/include/linux/ceph/decode.h b/include/linux/ceph/decode.h index c5b6939fb32a..220ae21e819b 100644 --- a/include/linux/ceph/decode.h +++ b/include/linux/ceph/decode.h @@ -1,8 +1,9 @@ #ifndef __CEPH_DECODE_H #define __CEPH_DECODE_H -#include <asm/unaligned.h> +#include <linux/bug.h> #include <linux/time.h> +#include <asm/unaligned.h> #include "types.h" diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index 95bd8502e715..e71d683982a6 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -7,6 +7,7 @@ #include <linux/backing-dev.h> #include <linux/completion.h> #include <linux/exportfs.h> +#include <linux/bug.h> #include <linux/fs.h> #include <linux/mempool.h> #include <linux/pagemap.h> @@ -207,7 +208,7 @@ extern struct kmem_cache *ceph_cap_cachep; extern struct kmem_cache *ceph_dentry_cachep; extern struct kmem_cache *ceph_file_cachep; -extern int ceph_parse_options(struct ceph_options **popt, char *options, +extern struct ceph_options *ceph_parse_options(char *options, const char *dev_name, const char *dev_name_end, int (*parse_extra_token)(char *c, void *private), void *private); diff --git a/include/linux/ceph/mdsmap.h b/include/linux/ceph/mdsmap.h index 4c5cb0880bba..9935fac8c107 100644 --- a/include/linux/ceph/mdsmap.h +++ b/include/linux/ceph/mdsmap.h @@ -1,6 +1,7 @@ #ifndef _FS_CEPH_MDSMAP_H #define _FS_CEPH_MDSMAP_H +#include <linux/bug.h> #include "types.h" /* diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index ffbeb2c217b4..3bff047f6b0f 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -14,8 +14,6 @@ struct ceph_msg; struct ceph_connection; -extern struct workqueue_struct *ceph_msgr_wq; /* receive work queue */ - /* * Ceph defines these callbacks for handling connection events. */ @@ -54,7 +52,6 @@ struct ceph_connection_operations { struct ceph_messenger { struct ceph_entity_inst inst; /* my name+address */ struct ceph_entity_addr my_enc_addr; - struct page *zero_page; /* used in certain error cases */ bool nocrc; @@ -101,7 +98,7 @@ struct ceph_msg { struct ceph_msg_pos { int page, page_pos; /* which page; offset in page */ int data_pos; /* offset in data payload */ - int did_page_crc; /* true if we've calculated crc for current page */ + bool did_page_crc; /* true if we've calculated crc for current page */ }; /* ceph connection fault delay defaults, for exponential backoff */ diff --git a/include/linux/cleancache.h b/include/linux/cleancache.h index 04ffb2e6c9d0..42e55deee757 100644 --- a/include/linux/cleancache.h +++ b/include/linux/cleancache.h @@ -28,9 +28,9 @@ struct cleancache_ops { pgoff_t, struct page *); void (*put_page)(int, struct cleancache_filekey, pgoff_t, struct page *); - void (*flush_page)(int, struct cleancache_filekey, pgoff_t); - void (*flush_inode)(int, struct cleancache_filekey); - void (*flush_fs)(int); + void (*invalidate_page)(int, struct cleancache_filekey, pgoff_t); + void (*invalidate_inode)(int, struct cleancache_filekey); + void (*invalidate_fs)(int); }; extern struct cleancache_ops @@ -39,9 +39,9 @@ extern void __cleancache_init_fs(struct super_block *); extern void __cleancache_init_shared_fs(char *, struct super_block *); extern int __cleancache_get_page(struct page *); extern void __cleancache_put_page(struct page *); -extern void __cleancache_flush_page(struct address_space *, struct page *); -extern void __cleancache_flush_inode(struct address_space *); -extern void __cleancache_flush_fs(struct super_block *); +extern void __cleancache_invalidate_page(struct address_space *, struct page *); +extern void __cleancache_invalidate_inode(struct address_space *); +extern void __cleancache_invalidate_fs(struct super_block *); extern int cleancache_enabled; #ifdef CONFIG_CLEANCACHE @@ -99,24 +99,24 @@ static inline void cleancache_put_page(struct page *page) __cleancache_put_page(page); } -static inline void cleancache_flush_page(struct address_space *mapping, +static inline void cleancache_invalidate_page(struct address_space *mapping, struct page *page) { /* careful... page->mapping is NULL sometimes when this is called */ if (cleancache_enabled && cleancache_fs_enabled_mapping(mapping)) - __cleancache_flush_page(mapping, page); + __cleancache_invalidate_page(mapping, page); } -static inline void cleancache_flush_inode(struct address_space *mapping) +static inline void cleancache_invalidate_inode(struct address_space *mapping) { if (cleancache_enabled && cleancache_fs_enabled_mapping(mapping)) - __cleancache_flush_inode(mapping); + __cleancache_invalidate_inode(mapping); } -static inline void cleancache_flush_fs(struct super_block *sb) +static inline void cleancache_invalidate_fs(struct super_block *sb) { if (cleancache_enabled) - __cleancache_flush_fs(sb); + __cleancache_invalidate_fs(sb); } #endif /* _LINUX_CLEANCACHE_H */ diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h new file mode 100644 index 000000000000..5e4312b6f5cc --- /dev/null +++ b/include/linux/clk-private.h @@ -0,0 +1,196 @@ +/* + * linux/include/linux/clk-private.h + * + * Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com> + * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_CLK_PRIVATE_H +#define __LINUX_CLK_PRIVATE_H + +#include <linux/clk-provider.h> +#include <linux/list.h> + +/* + * WARNING: Do not include clk-private.h from any file that implements struct + * clk_ops. Doing so is a layering violation! + * + * This header exists only to allow for statically initialized clock data. Any + * static clock data must be defined in a separate file from the logic that + * implements the clock operations for that same data. + */ + +#ifdef CONFIG_COMMON_CLK + +struct clk { + const char *name; + const struct clk_ops *ops; + struct clk_hw *hw; + struct clk *parent; + char **parent_names; + struct clk **parents; + u8 num_parents; + unsigned long rate; + unsigned long new_rate; + unsigned long flags; + unsigned int enable_count; + unsigned int prepare_count; + struct hlist_head children; + struct hlist_node child_node; + unsigned int notifier_count; +#ifdef CONFIG_COMMON_CLK_DEBUG + struct dentry *dentry; +#endif +}; + +/* + * DOC: Basic clock implementations common to many platforms + * + * Each basic clock hardware type is comprised of a structure describing the + * clock hardware, implementations of the relevant callbacks in struct clk_ops, + * unique flags for that hardware type, a registration function and an + * alternative macro for static initialization + */ + +extern struct clk_ops clk_fixed_rate_ops; + +#define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate, \ + _fixed_rate_flags) \ + static struct clk _name; \ + static char *_name##_parent_names[] = {}; \ + static struct clk_fixed_rate _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .fixed_rate = _rate, \ + .flags = _fixed_rate_flags, \ + }; \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &clk_fixed_rate_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _name##_parent_names, \ + .num_parents = \ + ARRAY_SIZE(_name##_parent_names), \ + .flags = _flags, \ + }; + +extern struct clk_ops clk_gate_ops; + +#define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr, \ + _flags, _reg, _bit_idx, \ + _gate_flags, _lock) \ + static struct clk _name; \ + static char *_name##_parent_names[] = { \ + _parent_name, \ + }; \ + static struct clk *_name##_parents[] = { \ + _parent_ptr, \ + }; \ + static struct clk_gate _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .reg = _reg, \ + .bit_idx = _bit_idx, \ + .flags = _gate_flags, \ + .lock = _lock, \ + }; \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &clk_gate_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _name##_parent_names, \ + .num_parents = \ + ARRAY_SIZE(_name##_parent_names), \ + .parents = _name##_parents, \ + .flags = _flags, \ + }; + +extern struct clk_ops clk_divider_ops; + +#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ + _flags, _reg, _shift, _width, \ + _divider_flags, _lock) \ + static struct clk _name; \ + static char *_name##_parent_names[] = { \ + _parent_name, \ + }; \ + static struct clk *_name##_parents[] = { \ + _parent_ptr, \ + }; \ + static struct clk_divider _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .reg = _reg, \ + .shift = _shift, \ + .width = _width, \ + .flags = _divider_flags, \ + .lock = _lock, \ + }; \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &clk_divider_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _name##_parent_names, \ + .num_parents = \ + ARRAY_SIZE(_name##_parent_names), \ + .parents = _name##_parents, \ + .flags = _flags, \ + }; + +extern struct clk_ops clk_mux_ops; + +#define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags, \ + _reg, _shift, _width, \ + _mux_flags, _lock) \ + static struct clk _name; \ + static struct clk_mux _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .reg = _reg, \ + .shift = _shift, \ + .width = _width, \ + .flags = _mux_flags, \ + .lock = _lock, \ + }; \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &clk_mux_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _parent_names, \ + .num_parents = \ + ARRAY_SIZE(_parent_names), \ + .parents = _parents, \ + .flags = _flags, \ + }; + +/** + * __clk_init - initialize the data structures in a struct clk + * @dev: device initializing this clk, placeholder for now + * @clk: clk being initialized + * + * Initializes the lists in struct clk, queries the hardware for the + * parent and rate and sets them both. + * + * Any struct clk passed into __clk_init must have the following members + * populated: + * .name + * .ops + * .hw + * .parent_names + * .num_parents + * .flags + * + * It is not necessary to call clk_register if __clk_init is used directly with + * statically initialized clock data. + */ +void __clk_init(struct device *dev, struct clk *clk); + +#endif /* CONFIG_COMMON_CLK */ +#endif /* CLK_PRIVATE_H */ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h new file mode 100644 index 000000000000..5508897ad376 --- /dev/null +++ b/include/linux/clk-provider.h @@ -0,0 +1,300 @@ +/* + * linux/include/linux/clk-provider.h + * + * Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com> + * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_CLK_PROVIDER_H +#define __LINUX_CLK_PROVIDER_H + +#include <linux/clk.h> + +#ifdef CONFIG_COMMON_CLK + +/** + * struct clk_hw - handle for traversing from a struct clk to its corresponding + * hardware-specific structure. struct clk_hw should be declared within struct + * clk_foo and then referenced by the struct clk instance that uses struct + * clk_foo's clk_ops + * + * clk: pointer to the struct clk instance that points back to this struct + * clk_hw instance + */ +struct clk_hw { + struct clk *clk; +}; + +/* + * flags used across common struct clk. these flags should only affect the + * top-level framework. custom flags for dealing with hardware specifics + * belong in struct clk_foo + */ +#define CLK_SET_RATE_GATE BIT(0) /* must be gated across rate change */ +#define CLK_SET_PARENT_GATE BIT(1) /* must be gated across re-parent */ +#define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */ +#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ +#define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ + +/** + * struct clk_ops - Callback operations for hardware clocks; these are to + * be provided by the clock implementation, and will be called by drivers + * through the clk_* api. + * + * @prepare: Prepare the clock for enabling. This must not return until + * the clock is fully prepared, and it's safe to call clk_enable. + * This callback is intended to allow clock implementations to + * do any initialisation that may sleep. Called with + * prepare_lock held. + * + * @unprepare: Release the clock from its prepared state. This will typically + * undo any work done in the @prepare callback. Called with + * prepare_lock held. + * + * @enable: Enable the clock atomically. This must not return until the + * clock is generating a valid clock signal, usable by consumer + * devices. Called with enable_lock held. This function must not + * sleep. + * + * @disable: Disable the clock atomically. Called with enable_lock held. + * This function must not sleep. + * + * @recalc_rate Recalculate the rate of this clock, by quering hardware. The + * parent rate is an input parameter. It is up to the caller to + * insure that the prepare_mutex is held across this call. + * Returns the calculated rate. Optional, but recommended - if + * this op is not set then clock rate will be initialized to 0. + * + * @round_rate: Given a target rate as input, returns the closest rate actually + * supported by the clock. + * + * @get_parent: Queries the hardware to determine the parent of a clock. The + * return value is a u8 which specifies the index corresponding to + * the parent clock. This index can be applied to either the + * .parent_names or .parents arrays. In short, this function + * translates the parent value read from hardware into an array + * index. Currently only called when the clock is initialized by + * __clk_init. This callback is mandatory for clocks with + * multiple parents. It is optional (and unnecessary) for clocks + * with 0 or 1 parents. + * + * @set_parent: Change the input source of this clock; for clocks with multiple + * possible parents specify a new parent by passing in the index + * as a u8 corresponding to the parent in either the .parent_names + * or .parents arrays. This function in affect translates an + * array index into the value programmed into the hardware. + * Returns 0 on success, -EERROR otherwise. + * + * @set_rate: Change the rate of this clock. If this callback returns + * CLK_SET_RATE_PARENT, the rate change will be propagated to the + * parent clock (which may propagate again if the parent clock + * also sets this flag). The requested rate of the parent is + * passed back from the callback in the second 'unsigned long *' + * argument. Note that it is up to the hardware clock's set_rate + * implementation to insure that clocks do not run out of spec + * when propgating the call to set_rate up to the parent. One way + * to do this is to gate the clock (via clk_disable and/or + * clk_unprepare) before calling clk_set_rate, then ungating it + * afterward. If your clock also has the CLK_GATE_SET_RATE flag + * set then this will insure safety. Returns 0 on success, + * -EERROR otherwise. + * + * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow + * implementations to split any work between atomic (enable) and sleepable + * (prepare) contexts. If enabling a clock requires code that might sleep, + * this must be done in clk_prepare. Clock enable code that will never be + * called in a sleepable context may be implement in clk_enable. + * + * Typically, drivers will call clk_prepare when a clock may be needed later + * (eg. when a device is opened), and clk_enable when the clock is actually + * required (eg. from an interrupt). Note that clk_prepare MUST have been + * called before clk_enable. + */ +struct clk_ops { + int (*prepare)(struct clk_hw *hw); + void (*unprepare)(struct clk_hw *hw); + int (*enable)(struct clk_hw *hw); + void (*disable)(struct clk_hw *hw); + int (*is_enabled)(struct clk_hw *hw); + unsigned long (*recalc_rate)(struct clk_hw *hw, + unsigned long parent_rate); + long (*round_rate)(struct clk_hw *hw, unsigned long, + unsigned long *); + int (*set_parent)(struct clk_hw *hw, u8 index); + u8 (*get_parent)(struct clk_hw *hw); + int (*set_rate)(struct clk_hw *hw, unsigned long); + void (*init)(struct clk_hw *hw); +}; + +/* + * DOC: Basic clock implementations common to many platforms + * + * Each basic clock hardware type is comprised of a structure describing the + * clock hardware, implementations of the relevant callbacks in struct clk_ops, + * unique flags for that hardware type, a registration function and an + * alternative macro for static initialization + */ + +/** + * struct clk_fixed_rate - fixed-rate clock + * @hw: handle between common and hardware-specific interfaces + * @fixed_rate: constant frequency of clock + */ +struct clk_fixed_rate { + struct clk_hw hw; + unsigned long fixed_rate; + u8 flags; +}; + +struct clk *clk_register_fixed_rate(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + unsigned long fixed_rate); + +/** + * struct clk_gate - gating clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register controlling gate + * @bit_idx: single bit controlling gate + * @flags: hardware-specific flags + * @lock: register lock + * + * Clock which can gate its output. Implements .enable & .disable + * + * Flags: + * CLK_GATE_SET_DISABLE - by default this clock sets the bit at bit_idx to + * enable the clock. Setting this flag does the opposite: setting the bit + * disable the clock and clearing it enables the clock + */ +struct clk_gate { + struct clk_hw hw; + void __iomem *reg; + u8 bit_idx; + u8 flags; + spinlock_t *lock; + char *parent[1]; +}; + +#define CLK_GATE_SET_TO_DISABLE BIT(0) + +struct clk *clk_register_gate(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 bit_idx, + u8 clk_gate_flags, spinlock_t *lock); + +/** + * struct clk_divider - adjustable divider clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register containing the divider + * @shift: shift to the divider bit field + * @width: width of the divider bit field + * @lock: register lock + * + * Clock with an adjustable divider affecting its output frequency. Implements + * .recalc_rate, .set_rate and .round_rate + * + * Flags: + * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the + * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is + * the raw value read from the register, with the value of zero considered + * invalid + * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from + * the hardware register + */ +struct clk_divider { + struct clk_hw hw; + void __iomem *reg; + u8 shift; + u8 width; + u8 flags; + spinlock_t *lock; + char *parent[1]; +}; + +#define CLK_DIVIDER_ONE_BASED BIT(0) +#define CLK_DIVIDER_POWER_OF_TWO BIT(1) + +struct clk *clk_register_divider(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_divider_flags, spinlock_t *lock); + +/** + * struct clk_mux - multiplexer clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register controlling multiplexer + * @shift: shift to multiplexer bit field + * @width: width of mutliplexer bit field + * @num_clks: number of parent clocks + * @lock: register lock + * + * Clock with multiple selectable parents. Implements .get_parent, .set_parent + * and .recalc_rate + * + * Flags: + * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 + * CLK_MUX_INDEX_BITWISE - register index is a single bit (power of two) + */ +struct clk_mux { + struct clk_hw hw; + void __iomem *reg; + u8 shift; + u8 width; + u8 flags; + spinlock_t *lock; +}; + +#define CLK_MUX_INDEX_ONE BIT(0) +#define CLK_MUX_INDEX_BIT BIT(1) + +struct clk *clk_register_mux(struct device *dev, const char *name, + char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_mux_flags, spinlock_t *lock); + +/** + * clk_register - allocate a new clock, register it and return an opaque cookie + * @dev: device that is registering this clock + * @name: clock name + * @ops: operations this clock supports + * @hw: link to hardware-specific clock data + * @parent_names: array of string names for all possible parents + * @num_parents: number of possible parents + * @flags: framework-level hints and quirks + * + * clk_register is the primary interface for populating the clock tree with new + * clock nodes. It returns a pointer to the newly allocated struct clk which + * cannot be dereferenced by driver code but may be used in conjuction with the + * rest of the clock API. + */ +struct clk *clk_register(struct device *dev, const char *name, + const struct clk_ops *ops, struct clk_hw *hw, + char **parent_names, u8 num_parents, unsigned long flags); + +/* helper functions */ +const char *__clk_get_name(struct clk *clk); +struct clk_hw *__clk_get_hw(struct clk *clk); +u8 __clk_get_num_parents(struct clk *clk); +struct clk *__clk_get_parent(struct clk *clk); +inline int __clk_get_enable_count(struct clk *clk); +inline int __clk_get_prepare_count(struct clk *clk); +unsigned long __clk_get_rate(struct clk *clk); +unsigned long __clk_get_flags(struct clk *clk); +int __clk_is_enabled(struct clk *clk); +struct clk *__clk_lookup(const char *name); + +/* + * FIXME clock api without lock protection + */ +int __clk_prepare(struct clk *clk); +void __clk_unprepare(struct clk *clk); +void __clk_reparent(struct clk *clk, struct clk *new_parent); +unsigned long __clk_round_rate(struct clk *clk, unsigned long rate); + +#endif /* CONFIG_COMMON_CLK */ +#endif /* CLK_PROVIDER_H */ diff --git a/include/linux/clk.h b/include/linux/clk.h index b9d46fa154b4..b0252726df61 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -3,6 +3,7 @@ * * Copyright (C) 2004 ARM Limited. * Written by Deep Blue Solutions Limited. + * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,18 +13,75 @@ #define __LINUX_CLK_H #include <linux/kernel.h> +#include <linux/notifier.h> struct device; -/* - * The base API. +struct clk; + +#ifdef CONFIG_COMMON_CLK + +/** + * DOC: clk notifier callback types + * + * PRE_RATE_CHANGE - called immediately before the clk rate is changed, + * to indicate that the rate change will proceed. Drivers must + * immediately terminate any operations that will be affected by the + * rate change. Callbacks may either return NOTIFY_DONE or + * NOTIFY_STOP. + * + * ABORT_RATE_CHANGE: called if the rate change failed for some reason + * after PRE_RATE_CHANGE. In this case, all registered notifiers on + * the clk will be called with ABORT_RATE_CHANGE. Callbacks must + * always return NOTIFY_DONE. + * + * POST_RATE_CHANGE - called after the clk rate change has successfully + * completed. Callbacks must always return NOTIFY_DONE. + * */ +#define PRE_RATE_CHANGE BIT(0) +#define POST_RATE_CHANGE BIT(1) +#define ABORT_RATE_CHANGE BIT(2) +/** + * struct clk_notifier - associate a clk with a notifier + * @clk: struct clk * to associate the notifier with + * @notifier_head: a blocking_notifier_head for this clk + * @node: linked list pointers + * + * A list of struct clk_notifier is maintained by the notifier code. + * An entry is created whenever code registers the first notifier on a + * particular @clk. Future notifiers on that @clk are added to the + * @notifier_head. + */ +struct clk_notifier { + struct clk *clk; + struct srcu_notifier_head notifier_head; + struct list_head node; +}; -/* - * struct clk - an machine class defined object / cookie. +/** + * struct clk_notifier_data - rate data to pass to the notifier callback + * @clk: struct clk * being changed + * @old_rate: previous rate of this clk + * @new_rate: new rate of this clk + * + * For a pre-notifier, old_rate is the clk's rate before this rate + * change, and new_rate is what the rate will be in the future. For a + * post-notifier, old_rate and new_rate are both set to the clk's + * current rate (this was done to optimize the implementation). */ -struct clk; +struct clk_notifier_data { + struct clk *clk; + unsigned long old_rate; + unsigned long new_rate; +}; + +int clk_notifier_register(struct clk *clk, struct notifier_block *nb); + +int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb); + +#endif /* !CONFIG_COMMON_CLK */ /** * clk_get - lookup and obtain a reference to a clock producer. diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h index e3d8bf26e5eb..aa629bce9033 100644 --- a/include/linux/cnt32_to_63.h +++ b/include/linux/cnt32_to_63.h @@ -16,7 +16,6 @@ #include <linux/compiler.h> #include <linux/types.h> #include <asm/byteorder.h> -#include <asm/system.h> /* this is used only to give gcc a clue about good code generation */ union cnt32_to_63 { diff --git a/include/linux/compat.h b/include/linux/compat.h index 7e05fcee75a1..5d46217f84ad 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -19,6 +19,10 @@ #include <asm/siginfo.h> #include <asm/signal.h> +#ifndef COMPAT_USE_64BIT_TIME +#define COMPAT_USE_64BIT_TIME 0 +#endif + #define compat_jiffies_to_clock_t(x) \ (((unsigned long)(x) * COMPAT_USER_HZ) / HZ) @@ -83,10 +87,26 @@ typedef struct { compat_sigset_word sig[_COMPAT_NSIG_WORDS]; } compat_sigset_t; +/* + * These functions operate strictly on struct compat_time* + */ extern int get_compat_timespec(struct timespec *, const struct compat_timespec __user *); extern int put_compat_timespec(const struct timespec *, struct compat_timespec __user *); +extern int get_compat_timeval(struct timeval *, + const struct compat_timeval __user *); +extern int put_compat_timeval(const struct timeval *, + struct compat_timeval __user *); +/* + * These functions operate on 32- or 64-bit specs depending on + * COMPAT_USE_64BIT_TIME, hence the void user pointer arguments and the + * naming as compat_get/put_ rather than get/put_compat_. + */ +extern int compat_get_timespec(struct timespec *, const void __user *); +extern int compat_put_timespec(const struct timespec *, void __user *); +extern int compat_get_timeval(struct timeval *, const void __user *); +extern int compat_put_timeval(const struct timeval *, void __user *); struct compat_iovec { compat_uptr_t iov_base; @@ -224,6 +244,7 @@ struct compat_sysinfo; struct compat_sysctl_args; struct compat_kexec_segment; struct compat_mq_attr; +struct compat_msgbuf; extern void compat_exit_robust_list(struct task_struct *curr); @@ -234,13 +255,22 @@ asmlinkage long compat_sys_get_robust_list(int pid, compat_uptr_t __user *head_ptr, compat_size_t __user *len_ptr); +#ifdef CONFIG_ARCH_WANT_OLD_COMPAT_IPC long compat_sys_semctl(int first, int second, int third, void __user *uptr); long compat_sys_msgsnd(int first, int second, int third, void __user *uptr); long compat_sys_msgrcv(int first, int second, int msgtyp, int third, int version, void __user *uptr); -long compat_sys_msgctl(int first, int second, void __user *uptr); long compat_sys_shmat(int first, int second, compat_uptr_t third, int version, void __user *uptr); +#else +long compat_sys_semctl(int semid, int semnum, int cmd, int arg); +long compat_sys_msgsnd(int msqid, struct compat_msgbuf __user *msgp, + size_t msgsz, int msgflg); +long compat_sys_msgrcv(int msqid, struct compat_msgbuf __user *msgp, + size_t msgsz, long msgtyp, int msgflg); +long compat_sys_shmat(int shmid, compat_uptr_t shmaddr, int shmflg); +#endif +long compat_sys_msgctl(int first, int second, void __user *uptr); long compat_sys_shmctl(int first, int second, void __user *uptr); long compat_sys_semtimedop(int semid, struct sembuf __user *tsems, unsigned nsems, const struct compat_timespec __user *timeout); diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 3fd17c249221..e5834aa24b9e 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -87,7 +87,8 @@ */ #define __pure __attribute__((pure)) #define __aligned(x) __attribute__((aligned(x))) -#define __printf(a,b) __attribute__((format(printf,a,b))) +#define __printf(a, b) __attribute__((format(printf, a, b))) +#define __scanf(a, b) __attribute__((format(scanf, a, b))) #define noinline __attribute__((noinline)) #define __attribute_const__ __attribute__((__const__)) #define __maybe_unused __attribute__((unused)) diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 6e53b4823d7f..ee28844ae68e 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -14,11 +14,12 @@ #ifndef _LINUX_CPU_H_ #define _LINUX_CPU_H_ -#include <linux/device.h> #include <linux/node.h> #include <linux/compiler.h> #include <linux/cpumask.h> +struct device; + struct cpu { int node_id; /* The node which contains the CPU */ int hotpluggable; /* creates sysfs control file if hotpluggable */ diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 6216115c7789..b60f6ba01d0c 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -14,7 +14,6 @@ #include <linux/mutex.h> #include <linux/notifier.h> #include <linux/threads.h> -#include <linux/device.h> #include <linux/kobject.h> #include <linux/sysfs.h> #include <linux/completion.h> @@ -35,6 +34,7 @@ #ifdef CONFIG_CPU_FREQ int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list); int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list); +extern void disable_cpufreq(void); #else /* CONFIG_CPU_FREQ */ static inline int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list) @@ -46,6 +46,7 @@ static inline int cpufreq_unregister_notifier(struct notifier_block *nb, { return 0; } +static inline void disable_cpufreq(void) { } #endif /* CONFIG_CPU_FREQ */ /* if (cpufreq_driver->target) exists, the ->governor decides what frequency diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 4f7a63237471..1ffdb9856bb9 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/threads.h> #include <linux/bitmap.h> +#include <linux/bug.h> typedef struct cpumask { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t; @@ -809,11 +810,10 @@ static inline const struct cpumask *get_cpu_mask(unsigned int cpu) #else /* NR_CPUS > 1 */ int __first_cpu(const cpumask_t *srcp); int __next_cpu(int n, const cpumask_t *srcp); -int __any_online_cpu(const cpumask_t *mask); #define first_cpu(src) __first_cpu(&(src)) #define next_cpu(n, src) __next_cpu((n), &(src)) -#define any_online_cpu(mask) __any_online_cpu(&(mask)) +#define any_online_cpu(mask) cpumask_any_and(&mask, cpu_online_mask) #define for_each_cpu_mask(cpu, mask) \ for ((cpu) = -1; \ (cpu) = next_cpu((cpu), (mask)), \ diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 7a7e5fd2a277..668f66baac7b 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -22,7 +22,7 @@ extern int cpuset_init(void); extern void cpuset_init_smp(void); extern void cpuset_update_active_cpus(void); extern void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask); -extern int cpuset_cpus_allowed_fallback(struct task_struct *p); +extern void cpuset_cpus_allowed_fallback(struct task_struct *p); extern nodemask_t cpuset_mems_allowed(struct task_struct *p); #define cpuset_current_mems_allowed (current->mems_allowed) void cpuset_init_current_mems_allowed(void); @@ -135,10 +135,8 @@ static inline void cpuset_cpus_allowed(struct task_struct *p, cpumask_copy(mask, cpu_possible_mask); } -static inline int cpuset_cpus_allowed_fallback(struct task_struct *p) +static inline void cpuset_cpus_allowed_fallback(struct task_struct *p) { - do_set_cpus_allowed(p, cpu_possible_mask); - return cpumask_any(cpu_active_mask); } static inline nodemask_t cpuset_mems_allowed(struct task_struct *p) diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h index b936763f2236..37e4f8da7cdf 100644 --- a/include/linux/crash_dump.h +++ b/include/linux/crash_dump.h @@ -3,7 +3,6 @@ #ifdef CONFIG_CRASH_DUMP #include <linux/kexec.h> -#include <linux/device.h> #include <linux/proc_fs.h> #include <linux/elf.h> diff --git a/include/linux/crc32.h b/include/linux/crc32.h index 391a259b2cc9..68267b64bb98 100644 --- a/include/linux/crc32.h +++ b/include/linux/crc32.h @@ -11,6 +11,8 @@ extern u32 crc32_le(u32 crc, unsigned char const *p, size_t len); extern u32 crc32_be(u32 crc, unsigned char const *p, size_t len); +extern u32 __crc32c_le(u32 crc, unsigned char const *p, size_t len); + #define crc32(seed, data, length) crc32_le(seed, (unsigned char const *)(data), length) /* diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 48ce5479386c..b92eadf92d72 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -20,6 +20,7 @@ #include <linux/atomic.h> #include <linux/kernel.h> #include <linux/list.h> +#include <linux/bug.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/uaccess.h> diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index 5033fb88c107..3bd46f766751 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -3,7 +3,7 @@ #include <linux/kernel.h> #include <linux/atomic.h> -#include <asm/system.h> +#include <linux/bug.h> struct task_struct; diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index f8ac076afa52..3efbfc2145c3 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -26,11 +26,12 @@ #include <linux/file.h> #include <linux/err.h> -#include <linux/device.h> #include <linux/scatterlist.h> #include <linux/list.h> #include <linux/dma-mapping.h> +#include <linux/fs.h> +struct device; struct dma_buf; struct dma_buf_attachment; @@ -49,6 +50,17 @@ struct dma_buf_attachment; * @unmap_dma_buf: decreases usecount of buffer, might deallocate scatter * pages. * @release: release this buffer; to be called after the last dma_buf_put. + * @begin_cpu_access: [optional] called before cpu access to invalidate cpu + * caches and allocate backing storage (if not yet done) + * respectively pin the objet into memory. + * @end_cpu_access: [optional] called after cpu access to flush cashes. + * @kmap_atomic: maps a page from the buffer into kernel address + * space, users may not block until the subsequent unmap call. + * This callback must not sleep. + * @kunmap_atomic: [optional] unmaps a atomically mapped page from the buffer. + * This Callback must not sleep. + * @kmap: maps a page from the buffer into kernel address space. + * @kunmap: [optional] unmaps a page from the buffer. */ struct dma_buf_ops { int (*attach)(struct dma_buf *, struct device *, @@ -63,7 +75,8 @@ struct dma_buf_ops { struct sg_table * (*map_dma_buf)(struct dma_buf_attachment *, enum dma_data_direction); void (*unmap_dma_buf)(struct dma_buf_attachment *, - struct sg_table *); + struct sg_table *, + enum dma_data_direction); /* TODO: Add try_map_dma_buf version, to return immed with -EBUSY * if the call would block. */ @@ -71,6 +84,14 @@ struct dma_buf_ops { /* after final dma_buf_put() */ void (*release)(struct dma_buf *); + int (*begin_cpu_access)(struct dma_buf *, size_t, size_t, + enum dma_data_direction); + void (*end_cpu_access)(struct dma_buf *, size_t, size_t, + enum dma_data_direction); + void *(*kmap_atomic)(struct dma_buf *, unsigned long); + void (*kunmap_atomic)(struct dma_buf *, unsigned long, void *); + void *(*kmap)(struct dma_buf *, unsigned long); + void (*kunmap)(struct dma_buf *, unsigned long, void *); }; /** @@ -86,7 +107,7 @@ struct dma_buf { struct file *file; struct list_head attachments; const struct dma_buf_ops *ops; - /* mutex to serialize list manipulation and other ops */ + /* mutex to serialize list manipulation and attach/detach */ struct mutex lock; void *priv; }; @@ -109,20 +130,43 @@ struct dma_buf_attachment { void *priv; }; +/** + * get_dma_buf - convenience wrapper for get_file. + * @dmabuf: [in] pointer to dma_buf + * + * Increments the reference count on the dma-buf, needed in case of drivers + * that either need to create additional references to the dmabuf on the + * kernel side. For example, an exporter that needs to keep a dmabuf ptr + * so that subsequent exports don't create a new dmabuf. + */ +static inline void get_dma_buf(struct dma_buf *dmabuf) +{ + get_file(dmabuf->file); +} + #ifdef CONFIG_DMA_SHARED_BUFFER struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, struct device *dev); void dma_buf_detach(struct dma_buf *dmabuf, struct dma_buf_attachment *dmabuf_attach); -struct dma_buf *dma_buf_export(void *priv, struct dma_buf_ops *ops, - size_t size, int flags); -int dma_buf_fd(struct dma_buf *dmabuf); +struct dma_buf *dma_buf_export(void *priv, const struct dma_buf_ops *ops, + size_t size, int flags); +int dma_buf_fd(struct dma_buf *dmabuf, int flags); struct dma_buf *dma_buf_get(int fd); void dma_buf_put(struct dma_buf *dmabuf); struct sg_table *dma_buf_map_attachment(struct dma_buf_attachment *, enum dma_data_direction); -void dma_buf_unmap_attachment(struct dma_buf_attachment *, struct sg_table *); +void dma_buf_unmap_attachment(struct dma_buf_attachment *, struct sg_table *, + enum dma_data_direction); +int dma_buf_begin_cpu_access(struct dma_buf *dma_buf, size_t start, size_t len, + enum dma_data_direction dir); +void dma_buf_end_cpu_access(struct dma_buf *dma_buf, size_t start, size_t len, + enum dma_data_direction dir); +void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long); +void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, void *); +void *dma_buf_kmap(struct dma_buf *, unsigned long); +void dma_buf_kunmap(struct dma_buf *, unsigned long, void *); #else static inline struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, @@ -138,13 +182,13 @@ static inline void dma_buf_detach(struct dma_buf *dmabuf, } static inline struct dma_buf *dma_buf_export(void *priv, - struct dma_buf_ops *ops, - size_t size, int flags) + const struct dma_buf_ops *ops, + size_t size, int flags) { return ERR_PTR(-ENODEV); } -static inline int dma_buf_fd(struct dma_buf *dmabuf) +static inline int dma_buf_fd(struct dma_buf *dmabuf, int flags) { return -ENODEV; } @@ -166,11 +210,44 @@ static inline struct sg_table *dma_buf_map_attachment( } static inline void dma_buf_unmap_attachment(struct dma_buf_attachment *attach, - struct sg_table *sg) + struct sg_table *sg, enum dma_data_direction dir) { return; } +static inline int dma_buf_begin_cpu_access(struct dma_buf *dmabuf, + size_t start, size_t len, + enum dma_data_direction dir) +{ + return -ENODEV; +} + +static inline void dma_buf_end_cpu_access(struct dma_buf *dmabuf, + size_t start, size_t len, + enum dma_data_direction dir) +{ +} + +static inline void *dma_buf_kmap_atomic(struct dma_buf *dmabuf, + unsigned long pnum) +{ + return NULL; +} + +static inline void dma_buf_kunmap_atomic(struct dma_buf *dmabuf, + unsigned long pnum, void *vaddr) +{ +} + +static inline void *dma_buf_kmap(struct dma_buf *dmabuf, unsigned long pnum) +{ + return NULL; +} + +static inline void dma_buf_kunmap(struct dma_buf *dmabuf, + unsigned long pnum, void *vaddr) +{ +} #endif /* CONFIG_DMA_SHARED_BUFFER */ #endif /* __DMA_BUF_H__ */ diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index e13117cbd2f7..5a736af3cc7a 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -77,7 +77,7 @@ static inline u64 dma_get_mask(struct device *dev) return DMA_BIT_MASK(32); } -#ifdef ARCH_HAS_DMA_SET_COHERENT_MASK +#ifdef CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK int dma_set_coherent_mask(struct device *dev, u64 mask); #else static inline int dma_set_coherent_mask(struct device *dev, u64 mask) diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 679b349d9b66..676f967390ae 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -18,13 +18,15 @@ * The full GNU General Public License is included in this distribution in the * file called COPYING. */ -#ifndef DMAENGINE_H -#define DMAENGINE_H +#ifndef LINUX_DMAENGINE_H +#define LINUX_DMAENGINE_H #include <linux/device.h> #include <linux/uio.h> +#include <linux/bug.h> #include <linux/scatterlist.h> #include <linux/bitmap.h> +#include <linux/types.h> #include <asm/page.h> /** @@ -257,6 +259,7 @@ struct dma_chan_percpu { * struct dma_chan - devices supply DMA channels, clients use them * @device: ptr to the dma device who supplies this channel, always !%NULL * @cookie: last cookie value returned to client + * @completed_cookie: last completed cookie for this channel * @chan_id: channel ID for sysfs * @dev: class device for sysfs * @device_node: used to add this to the device chan list @@ -268,6 +271,7 @@ struct dma_chan_percpu { struct dma_chan { struct dma_device *device; dma_cookie_t cookie; + dma_cookie_t completed_cookie; /* sysfs */ int chan_id; @@ -331,6 +335,9 @@ enum dma_slave_buswidth { * may or may not be applicable on memory sources. * @dst_maxburst: same as src_maxburst but for destination target * mutatis mutandis. + * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill + * with 'true' if peripheral should be flow controller. Direction will be + * selected at Runtime. * * This struct is passed in as configuration data to a DMA engine * in order to set up a certain channel for DMA transport at runtime. @@ -357,6 +364,7 @@ struct dma_slave_config { enum dma_slave_buswidth dst_addr_width; u32 src_maxburst; u32 dst_maxburst; + bool device_fc; }; static inline const char *dma_chan_name(struct dma_chan *chan) @@ -575,10 +583,11 @@ struct dma_device { struct dma_async_tx_descriptor *(*device_prep_slave_sg)( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags); + unsigned long flags, void *context); struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, - size_t period_len, enum dma_transfer_direction direction); + size_t period_len, enum dma_transfer_direction direction, + void *context); struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)( struct dma_chan *chan, struct dma_interleaved_template *xt, unsigned long flags); @@ -612,7 +621,24 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single( struct scatterlist sg; sg_init_one(&sg, buf, len); - return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags); + return chan->device->device_prep_slave_sg(chan, &sg, 1, + dir, flags, NULL); +} + +static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, + enum dma_transfer_direction dir, unsigned long flags) +{ + return chan->device->device_prep_slave_sg(chan, sgl, sg_len, + dir, flags, NULL); +} + +static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_transfer_direction dir) +{ + return chan->device->device_prep_dma_cyclic(chan, buf_addr, buf_len, + period_len, dir, NULL); } static inline int dmaengine_terminate_all(struct dma_chan *chan) diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h index f2c64f92c4a0..2412e02d7c0f 100644 --- a/include/linux/dw_dmac.h +++ b/include/linux/dw_dmac.h @@ -31,18 +31,6 @@ struct dw_dma_platform_data { unsigned char chan_priority; }; -/** - * enum dw_dma_slave_width - DMA slave register access width. - * @DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses - * @DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses - * @DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses - */ -enum dw_dma_slave_width { - DW_DMA_SLAVE_WIDTH_8BIT, - DW_DMA_SLAVE_WIDTH_16BIT, - DW_DMA_SLAVE_WIDTH_32BIT, -}; - /* bursts size */ enum dw_dma_msize { DW_DMA_MSIZE_1, @@ -55,47 +43,21 @@ enum dw_dma_msize { DW_DMA_MSIZE_256, }; -/* flow controller */ -enum dw_dma_fc { - DW_DMA_FC_D_M2M, - DW_DMA_FC_D_M2P, - DW_DMA_FC_D_P2M, - DW_DMA_FC_D_P2P, - DW_DMA_FC_P_P2M, - DW_DMA_FC_SP_P2P, - DW_DMA_FC_P_M2P, - DW_DMA_FC_DP_P2P, -}; - /** * struct dw_dma_slave - Controller-specific information about a slave * * @dma_dev: required DMA master device - * @tx_reg: physical address of data register used for - * memory-to-peripheral transfers - * @rx_reg: physical address of data register used for - * peripheral-to-memory transfers - * @reg_width: peripheral register width * @cfg_hi: Platform-specific initializer for the CFG_HI register * @cfg_lo: Platform-specific initializer for the CFG_LO register * @src_master: src master for transfers on allocated channel. * @dst_master: dest master for transfers on allocated channel. - * @src_msize: src burst size. - * @dst_msize: dest burst size. - * @fc: flow controller for DMA transfer */ struct dw_dma_slave { struct device *dma_dev; - dma_addr_t tx_reg; - dma_addr_t rx_reg; - enum dw_dma_slave_width reg_width; u32 cfg_hi; u32 cfg_lo; u8 src_master; u8 dst_master; - u8 src_msize; - u8 dst_msize; - u8 fc; }; /* Platform-configurable bits in CFG_HI */ diff --git a/include/linux/edac.h b/include/linux/edac.h index 1cd3947987e5..c621d762bb2c 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -13,7 +13,11 @@ #define _LINUX_EDAC_H_ #include <linux/atomic.h> -#include <linux/device.h> +#include <linux/kobject.h> +#include <linux/completion.h> +#include <linux/workqueue.h> + +struct device; #define EDAC_OPSTATE_INVAL -1 #define EDAC_OPSTATE_POLL 0 @@ -66,25 +70,64 @@ enum dev_type { #define DEV_FLAG_X32 BIT(DEV_X32) #define DEV_FLAG_X64 BIT(DEV_X64) -/* memory types */ +/** + * enum mem_type - memory types. For a more detailed reference, please see + * http://en.wikipedia.org/wiki/DRAM + * + * @MEM_EMPTY Empty csrow + * @MEM_RESERVED: Reserved csrow type + * @MEM_UNKNOWN: Unknown csrow type + * @MEM_FPM: FPM - Fast Page Mode, used on systems up to 1995. + * @MEM_EDO: EDO - Extended data out, used on systems up to 1998. + * @MEM_BEDO: BEDO - Burst Extended data out, an EDO variant. + * @MEM_SDR: SDR - Single data rate SDRAM + * http://en.wikipedia.org/wiki/Synchronous_dynamic_random-access_memory + * They use 3 pins for chip select: Pins 0 and 2 are + * for rank 0; pins 1 and 3 are for rank 1, if the memory + * is dual-rank. + * @MEM_RDR: Registered SDR SDRAM + * @MEM_DDR: Double data rate SDRAM + * http://en.wikipedia.org/wiki/DDR_SDRAM + * @MEM_RDDR: Registered Double data rate SDRAM + * This is a variant of the DDR memories. + * A registered memory has a buffer inside it, hiding + * part of the memory details to the memory controller. + * @MEM_RMBS: Rambus DRAM, used on a few Pentium III/IV controllers. + * @MEM_DDR2: DDR2 RAM, as described at JEDEC JESD79-2F. + * Those memories are labed as "PC2-" instead of "PC" to + * differenciate from DDR. + * @MEM_FB_DDR2: Fully-Buffered DDR2, as described at JEDEC Std No. 205 + * and JESD206. + * Those memories are accessed per DIMM slot, and not by + * a chip select signal. + * @MEM_RDDR2: Registered DDR2 RAM + * This is a variant of the DDR2 memories. + * @MEM_XDR: Rambus XDR + * It is an evolution of the original RAMBUS memories, + * created to compete with DDR2. Weren't used on any + * x86 arch, but cell_edac PPC memory controller uses it. + * @MEM_DDR3: DDR3 RAM + * @MEM_RDDR3: Registered DDR3 RAM + * This is a variant of the DDR3 memories. + */ enum mem_type { - MEM_EMPTY = 0, /* Empty csrow */ - MEM_RESERVED, /* Reserved csrow type */ - MEM_UNKNOWN, /* Unknown csrow type */ - MEM_FPM, /* Fast page mode */ - MEM_EDO, /* Extended data out */ - MEM_BEDO, /* Burst Extended data out */ - MEM_SDR, /* Single data rate SDRAM */ - MEM_RDR, /* Registered single data rate SDRAM */ - MEM_DDR, /* Double data rate SDRAM */ - MEM_RDDR, /* Registered Double data rate SDRAM */ - MEM_RMBS, /* Rambus DRAM */ - MEM_DDR2, /* DDR2 RAM */ - MEM_FB_DDR2, /* fully buffered DDR2 */ - MEM_RDDR2, /* Registered DDR2 RAM */ - MEM_XDR, /* Rambus XDR */ - MEM_DDR3, /* DDR3 RAM */ - MEM_RDDR3, /* Registered DDR3 RAM */ + MEM_EMPTY = 0, + MEM_RESERVED, + MEM_UNKNOWN, + MEM_FPM, + MEM_EDO, + MEM_BEDO, + MEM_SDR, + MEM_RDR, + MEM_DDR, + MEM_RDDR, + MEM_RMBS, + MEM_DDR2, + MEM_FB_DDR2, + MEM_RDDR2, + MEM_XDR, + MEM_DDR3, + MEM_RDDR3, }; #define MEM_FLAG_EMPTY BIT(MEM_EMPTY) @@ -162,8 +205,9 @@ enum scrub_type { #define OP_OFFLINE 0x300 /* - * There are several things to be aware of that aren't at all obvious: + * Concepts used at the EDAC subsystem * + * There are several things to be aware of that aren't at all obvious: * * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc.. * @@ -172,36 +216,61 @@ enum scrub_type { * creating a common ground for discussion, terms and their definitions * will be established. * - * Memory devices: The individual chip on a memory stick. These devices - * commonly output 4 and 8 bits each. Grouping several - * of these in parallel provides 64 bits which is common - * for a memory stick. + * Memory devices: The individual DRAM chips on a memory stick. These + * devices commonly output 4 and 8 bits each (x4, x8). + * Grouping several of these in parallel provides the + * number of bits that the memory controller expects: + * typically 72 bits, in order to provide 64 bits + + * 8 bits of ECC data. * * Memory Stick: A printed circuit board that aggregates multiple - * memory devices in parallel. This is the atomic - * memory component that is purchaseable by Joe consumer - * and loaded into a memory socket. + * memory devices in parallel. In general, this is the + * Field Replaceable Unit (FRU) which gets replaced, in + * the case of excessive errors. Most often it is also + * called DIMM (Dual Inline Memory Module). + * + * Memory Socket: A physical connector on the motherboard that accepts + * a single memory stick. Also called as "slot" on several + * datasheets. * - * Socket: A physical connector on the motherboard that accepts - * a single memory stick. + * Channel: A memory controller channel, responsible to communicate + * with a group of DIMMs. Each channel has its own + * independent control (command) and data bus, and can + * be used independently or grouped with other channels. * - * Channel: Set of memory devices on a memory stick that must be - * grouped in parallel with one or more additional - * channels from other memory sticks. This parallel - * grouping of the output from multiple channels are - * necessary for the smallest granularity of memory access. - * Some memory controllers are capable of single channel - - * which means that memory sticks can be loaded - * individually. Other memory controllers are only - * capable of dual channel - which means that memory - * sticks must be loaded as pairs (see "socket set"). + * Branch: It is typically the highest hierarchy on a + * Fully-Buffered DIMM memory controller. + * Typically, it contains two channels. + * Two channels at the same branch can be used in single + * mode or in lockstep mode. + * When lockstep is enabled, the cacheline is doubled, + * but it generally brings some performance penalty. + * Also, it is generally not possible to point to just one + * memory stick when an error occurs, as the error + * correction code is calculated using two DIMMs instead + * of one. Due to that, it is capable of correcting more + * errors than on single mode. * - * Chip-select row: All of the memory devices that are selected together. - * for a single, minimum grain of memory access. - * This selects all of the parallel memory devices across - * all of the parallel channels. Common chip-select rows - * for single channel are 64 bits, for dual channel 128 - * bits. + * Single-channel: The data accessed by the memory controller is contained + * into one dimm only. E. g. if the data is 64 bits-wide, + * the data flows to the CPU using one 64 bits parallel + * access. + * Typically used with SDR, DDR, DDR2 and DDR3 memories. + * FB-DIMM and RAMBUS use a different concept for channel, + * so this concept doesn't apply there. + * + * Double-channel: The data size accessed by the memory controller is + * interlaced into two dimms, accessed at the same time. + * E. g. if the DIMM is 64 bits-wide (72 bits with ECC), + * the data flows to the CPU using a 128 bits parallel + * access. + * + * Chip-select row: This is the name of the DRAM signal used to select the + * DRAM ranks to be accessed. Common chip-select rows for + * single channel are 64 bits, for dual channel 128 bits. + * It may not be visible by the memory controller, as some + * DIMM types have a memory buffer that can hide direct + * access to it from the Memory Controller. * * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory. * Motherboards commonly drive two chip-select pins to @@ -214,8 +283,8 @@ enum scrub_type { * * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick. * A double-sided stick has two chip-select rows which - * access different sets of memory devices. The two - * rows cannot be accessed concurrently. "Double-sided" + * access different sets of memory devices. The two + * rows cannot be accessed concurrently. "Double-sided" * is irrespective of the memory devices being mounted * on both sides of the memory stick. * @@ -243,10 +312,22 @@ enum scrub_type { * PS - I enjoyed writing all that about as much as you enjoyed reading it. */ -struct channel_info { - int chan_idx; /* channel index */ - u32 ce_count; /* Correctable Errors for this CHANNEL */ - char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */ +/** + * struct rank_info - contains the information for one DIMM rank + * + * @chan_idx: channel number where the rank is (typically, 0 or 1) + * @ce_count: number of correctable errors for this rank + * @label: DIMM label. Different ranks for the same DIMM should be + * filled, on userspace, with the same label. + * FIXME: The core currently won't enforce it. + * @csrow: A pointer to the chip select row structure (the parent + * structure). The location of the rank is given by + * the (csrow->csrow_idx, chan_idx) vector. + */ +struct rank_info { + int chan_idx; + u32 ce_count; + char label[EDAC_MC_LABEL_LEN + 1]; struct csrow_info *csrow; /* the parent */ }; @@ -270,7 +351,7 @@ struct csrow_info { /* channel information for this csrow */ u32 nr_channels; - struct channel_info *channels; + struct rank_info *channels; }; struct mcidev_sysfs_group { diff --git a/include/linux/efi.h b/include/linux/efi.h index 47fbf6b3dc77..88ec80670d5f 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -22,7 +22,6 @@ #include <linux/pstore.h> #include <asm/page.h> -#include <asm/system.h> #define EFI_SUCCESS 0 #define EFI_LOAD_ERROR ( 1 | (1UL << (BITS_PER_LONG-1))) diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h index 394a3e0e4a6b..0698c79fbcb2 100644 --- a/include/linux/elfcore.h +++ b/include/linux/elfcore.h @@ -6,6 +6,7 @@ #include <linux/time.h> #ifdef __KERNEL__ #include <linux/user.h> +#include <linux/bug.h> #endif #include <linux/ptrace.h> #include <linux/elf.h> diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h index f957085d40ed..f5a84eef6ed2 100644 --- a/include/linux/ext3_fs.h +++ b/include/linux/ext3_fs.h @@ -18,6 +18,7 @@ #include <linux/types.h> #include <linux/magic.h> +#include <linux/bug.h> /* * The second extended filesystem constants/structures diff --git a/include/linux/fb.h b/include/linux/fb.h index c18122f40543..d31cb682e173 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -407,7 +407,6 @@ struct fb_cursor { #include <linux/fs.h> #include <linux/init.h> -#include <linux/device.h> #include <linux/workqueue.h> #include <linux/notifier.h> #include <linux/list.h> @@ -1003,6 +1002,7 @@ extern ssize_t fb_sys_write(struct fb_info *info, const char __user *buf, /* drivers/video/fbmem.c */ extern int register_framebuffer(struct fb_info *fb_info); extern int unregister_framebuffer(struct fb_info *fb_info); +extern int unlink_framebuffer(struct fb_info *fb_info); extern void remove_conflicting_framebuffers(struct apertures_struct *a, const char *name, bool primary); extern int fb_prepare_logo(struct fb_info *fb_info, int rotate); diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h index 82163c4b32c9..158a41eed314 100644 --- a/include/linux/fdtable.h +++ b/include/linux/fdtable.h @@ -21,23 +21,45 @@ */ #define NR_OPEN_DEFAULT BITS_PER_LONG -/* - * The embedded_fd_set is a small fd_set, - * suitable for most tasks (which open <= BITS_PER_LONG files) - */ -struct embedded_fd_set { - unsigned long fds_bits[1]; -}; - struct fdtable { unsigned int max_fds; struct file __rcu **fd; /* current fd array */ - fd_set *close_on_exec; - fd_set *open_fds; + unsigned long *close_on_exec; + unsigned long *open_fds; struct rcu_head rcu; struct fdtable *next; }; +static inline void __set_close_on_exec(int fd, struct fdtable *fdt) +{ + __set_bit(fd, fdt->close_on_exec); +} + +static inline void __clear_close_on_exec(int fd, struct fdtable *fdt) +{ + __clear_bit(fd, fdt->close_on_exec); +} + +static inline bool close_on_exec(int fd, const struct fdtable *fdt) +{ + return test_bit(fd, fdt->close_on_exec); +} + +static inline void __set_open_fd(int fd, struct fdtable *fdt) +{ + __set_bit(fd, fdt->open_fds); +} + +static inline void __clear_open_fd(int fd, struct fdtable *fdt) +{ + __clear_bit(fd, fdt->open_fds); +} + +static inline bool fd_is_open(int fd, const struct fdtable *fdt) +{ + return test_bit(fd, fdt->open_fds); +} + /* * Open file table structure */ @@ -53,8 +75,8 @@ struct files_struct { */ spinlock_t file_lock ____cacheline_aligned_in_smp; int next_fd; - struct embedded_fd_set close_on_exec_init; - struct embedded_fd_set open_fds_init; + unsigned long close_on_exec_init[1]; + unsigned long open_fds_init[1]; struct file __rcu * fd_array[NR_OPEN_DEFAULT]; }; diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h index 357dbfc2829e..d50036953497 100644 --- a/include/linux/firewire-cdev.h +++ b/include/linux/firewire-cdev.h @@ -207,12 +207,16 @@ struct fw_cdev_event_request2 { * @closure: See &fw_cdev_event_common; * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT - * @cycle: Cycle counter of the interrupt packet + * @cycle: Cycle counter of the last completed packet * @header_length: Total length of following headers, in bytes * @header: Stripped headers, if any * * This event is sent when the controller has completed an &fw_cdev_iso_packet - * with the %FW_CDEV_ISO_INTERRUPT bit set. + * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with + * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets + * without the interrupt bit set that the kernel's internal buffer for @header + * is about to overflow. (In the last case, kernels with ABI version < 5 drop + * header data up to the next interrupt packet.) * * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT): * @@ -267,9 +271,9 @@ struct fw_cdev_event_iso_interrupt { * * This event is sent in multichannel contexts (context type * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer - * chunks that have the %FW_CDEV_ISO_INTERRUPT bit set. Whether this happens - * when a packet is completed and/or when a buffer chunk is completed depends - * on the hardware implementation. + * chunks that have been completely filled and that have the + * %FW_CDEV_ISO_INTERRUPT bit set, or when explicitly requested with + * %FW_CDEV_IOC_FLUSH_ISO. * * The buffer is continuously filled with the following data, per packet: * - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt, @@ -419,6 +423,9 @@ union fw_cdev_event { #define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets) #define FW_CDEV_IOC_SET_ISO_CHANNELS _IOW('#', 0x17, struct fw_cdev_set_iso_channels) +/* available since kernel version 3.4 */ +#define FW_CDEV_IOC_FLUSH_ISO _IOW('#', 0x18, struct fw_cdev_flush_iso) + /* * ABI version history * 1 (2.6.22) - initial version @@ -441,6 +448,9 @@ union fw_cdev_event { * - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL, * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and * %FW_CDEV_IOC_SET_ISO_CHANNELS + * 5 (3.4) - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to + * avoid dropping data + * - added %FW_CDEV_IOC_FLUSH_ISO */ /** @@ -851,6 +861,25 @@ struct fw_cdev_stop_iso { }; /** + * struct fw_cdev_flush_iso - flush completed iso packets + * @handle: handle of isochronous context to flush + * + * For %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, + * report any completed packets. + * + * For %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL contexts, report the current + * offset in the receive buffer, if it has changed; this is typically in the + * middle of some buffer chunk. + * + * Any %FW_CDEV_EVENT_ISO_INTERRUPT or %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL + * events generated by this ioctl are sent synchronously, i.e., are available + * for reading from the file descriptor when this ioctl returns. + */ +struct fw_cdev_flush_iso { + __u32 handle; +}; + +/** * struct fw_cdev_get_cycle_timer - read cycle timer register * @local_time: system time, in microseconds since the Epoch * @cycle_timer: Cycle Time register contents diff --git a/include/linux/firewire.h b/include/linux/firewire.h index 84ccf8e04fa6..4db7b68f0582 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -2,7 +2,6 @@ #define _LINUX_FIREWIRE_H #include <linux/completion.h> -#include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/kernel.h> #include <linux/kref.h> @@ -17,9 +16,6 @@ #include <linux/atomic.h> #include <asm/byteorder.h> -#define fw_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, ## args) -#define fw_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args) - #define CSR_REGISTER_BASE 0xfffff0000000ULL /* register offsets are relative to CSR_REGISTER_BASE */ @@ -68,6 +64,8 @@ #define CSR_MODEL 0x17 #define CSR_DIRECTORY_ID 0x20 +struct device; + struct fw_csr_iterator { const u32 *p; const u32 *end; @@ -203,18 +201,6 @@ static inline int fw_device_is_shutdown(struct fw_device *device) return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN; } -static inline struct fw_device *fw_device_get(struct fw_device *device) -{ - get_device(&device->device); - - return device; -} - -static inline void fw_device_put(struct fw_device *device) -{ - put_device(&device->device); -} - int fw_device_enable_phys_dma(struct fw_device *device); /* @@ -441,6 +427,7 @@ int fw_iso_context_queue(struct fw_iso_context *ctx, struct fw_iso_buffer *buffer, unsigned long payload); void fw_iso_context_queue_flush(struct fw_iso_context *ctx); +int fw_iso_context_flush_completions(struct fw_iso_context *ctx); int fw_iso_context_start(struct fw_iso_context *ctx, int cycle, int sync, int tags); int fw_iso_context_stop(struct fw_iso_context *ctx); diff --git a/include/linux/fs.h b/include/linux/fs.h index 9bbe1a9ac432..135693e79f2b 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -92,6 +92,10 @@ struct inodes_stat_t { /* File is opened using open(.., 3, ..) and is writeable only for ioctls (specialy hack for floppy.c) */ #define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) +/* 32bit hashes as llseek() offset (for directories) */ +#define FMODE_32BITHASH ((__force fmode_t)0x200) +/* 64bit hashes as llseek() offset (for directories) */ +#define FMODE_64BITHASH ((__force fmode_t)0x400) /* * Don't update ctime and mtime. @@ -389,6 +393,7 @@ struct inodes_stat_t { #include <linux/prio_tree.h> #include <linux/init.h> #include <linux/pid.h> +#include <linux/bug.h> #include <linux/mutex.h> #include <linux/capability.h> #include <linux/semaphore.h> @@ -1871,19 +1876,6 @@ extern struct dentry *mount_pseudo(struct file_system_type *, char *, const struct dentry_operations *dops, unsigned long); -static inline void sb_mark_dirty(struct super_block *sb) -{ - sb->s_dirt = 1; -} -static inline void sb_mark_clean(struct super_block *sb) -{ - sb->s_dirt = 0; -} -static inline int sb_is_dirty(struct super_block *sb) -{ - return sb->s_dirt; -} - /* Alas, no aliases. Too much hassle with bringing module.h everywhere */ #define fops_get(fops) \ (((fops) && try_module_get((fops)->owner) ? (fops) : NULL)) diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index 2a53f10712b3..a6dfe6944564 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -14,6 +14,7 @@ #include <linux/fsnotify_backend.h> #include <linux/audit.h> #include <linux/slab.h> +#include <linux/bug.h> /* * fsnotify_d_instantiate - instantiate a dentry for inode diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 38ac48b7d3a8..6155ecf192b0 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -14,6 +14,12 @@ #define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW) #define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH) +/* Gpio pin is open drain */ +#define GPIOF_OPEN_DRAIN (1 << 2) + +/* Gpio pin is open source */ +#define GPIOF_OPEN_SOURCE (1 << 3) + /** * struct gpio - a structure describing a GPIO with configuration * @gpio: the GPIO number @@ -34,6 +40,7 @@ struct gpio { #include <linux/kernel.h> #include <linux/types.h> #include <linux/errno.h> +#include <linux/bug.h> struct device; struct gpio_chip; diff --git a/include/linux/highmem.h b/include/linux/highmem.h index 6549ed75e0a7..d3999b4e26cc 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -3,6 +3,7 @@ #include <linux/fs.h> #include <linux/kernel.h> +#include <linux/bug.h> #include <linux/mm.h> #include <linux/uaccess.h> #include <linux/hardirq.h> diff --git a/include/linux/hwmon-sysfs.h b/include/linux/hwmon-sysfs.h index a90c09d331c1..1c7b89ae6bdc 100644 --- a/include/linux/hwmon-sysfs.h +++ b/include/linux/hwmon-sysfs.h @@ -20,6 +20,8 @@ #ifndef _LINUX_HWMON_SYSFS_H #define _LINUX_HWMON_SYSFS_H +#include <linux/device.h> + struct sensor_device_attribute{ struct device_attribute dev_attr; int index; diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h index 6b6ee702b007..82b29ae6ebb0 100644 --- a/include/linux/hwmon.h +++ b/include/linux/hwmon.h @@ -14,7 +14,7 @@ #ifndef _HWMON_H_ #define _HWMON_H_ -#include <linux/device.h> +struct device; struct device *hwmon_device_register(struct device *dev); diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h index aad6bd4b3efd..3343298e40e8 100644 --- a/include/linux/hwspinlock.h +++ b/include/linux/hwspinlock.h @@ -20,12 +20,12 @@ #include <linux/err.h> #include <linux/sched.h> -#include <linux/device.h> /* hwspinlock mode argument */ #define HWLOCK_IRQSTATE 0x01 /* Disable interrupts, save state */ #define HWLOCK_IRQ 0x02 /* Disable interrupts, don't save state */ +struct device; struct hwspinlock; struct hwspinlock_device; struct hwspinlock_ops; diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index 4f98148c11c3..63904ba6887e 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -15,7 +15,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even @@ -49,5 +50,6 @@ struct i2c_algo_bit_data { int i2c_bit_add_bus(struct i2c_adapter *); int i2c_bit_add_numbered_bus(struct i2c_adapter *); +extern const struct i2c_algorithm i2c_bit_algo; #endif /* _LINUX_I2C_ALGO_BIT_H */ diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 0f91a957a690..538e8f41a319 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -16,7 +16,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h index fd53bfd26470..8a7406b2114d 100644 --- a/include/linux/i2c-dev.h +++ b/include/linux/i2c-dev.h @@ -16,7 +16,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ #ifndef _LINUX_I2C_DEV_H diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h index 34536effd652..747f0cde4164 100644 --- a/include/linux/i2c-mux.h +++ b/include/linux/i2c-mux.h @@ -18,7 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #ifndef _LINUX_I2C_MUX_H diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h index 63f57a8c8b31..017fb40f702a 100644 --- a/include/linux/i2c-smbus.h +++ b/include/linux/i2c-smbus.h @@ -15,7 +15,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #ifndef _LINUX_I2C_SMBUS_H diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 8e25a9167f13..195d8b3d9cfb 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -17,7 +17,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and diff --git a/include/linux/i2c/at24.h b/include/linux/i2c/at24.h index 8ace93024d60..285025a9cdc9 100644 --- a/include/linux/i2c/at24.h +++ b/include/linux/i2c/at24.h @@ -1,19 +1,42 @@ +/* + * at24.h - platform_data for the at24 (generic eeprom) driver + * (C) Copyright 2008 by Pengutronix + * (C) Copyright 2012 by Wolfram Sang + * same license as the driver + */ + #ifndef _LINUX_AT24_H #define _LINUX_AT24_H #include <linux/types.h> #include <linux/memory.h> -/* - * As seen through Linux I2C, differences between the most common types of I2C - * memory include: - * - How much memory is available (usually specified in bit)? - * - What write page size does it support? - * - Special flags (16 bit addresses, read_only, world readable...)? +/** + * struct at24_platform_data - data to set up at24 (generic eeprom) driver + * @byte_len: size of eeprom in byte + * @page_size: number of byte which can be written in one go + * @flags: tunable options, check AT24_FLAG_* defines + * @setup: an optional callback invoked after eeprom is probed; enables kernel + code to access eeprom via memory_accessor, see example + * @context: optional parameter passed to setup() * * If you set up a custom eeprom type, please double-check the parameters. * Especially page_size needs extra care, as you risk data loss if your value * is bigger than what the chip actually supports! + * + * An example in pseudo code for a setup() callback: + * + * void get_mac_addr(struct memory_accessor *mem_acc, void *context) + * { + * u8 *mac_addr = ethernet_pdata->mac_addr; + * off_t offset = context; + * + * // Read MAC addr from EEPROM + * if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); + * } + * + * This function pointer and context can now be set up in at24_platform_data. */ struct at24_platform_data { diff --git a/include/linux/i2c/tc35876x.h b/include/linux/i2c/tc35876x.h new file mode 100644 index 000000000000..cd6a51c71e7e --- /dev/null +++ b/include/linux/i2c/tc35876x.h @@ -0,0 +1,11 @@ + +#ifndef _TC35876X_H +#define _TC35876X_H + +struct tc35876x_platform_data { + int gpio_bridge_reset; + int gpio_panel_bl_en; + int gpio_panel_vadd; +}; + +#endif /* _TC35876X_H */ diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 7fcab23c59ce..2463b6100333 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -761,7 +761,7 @@ struct twl_regulator_driver_data { /*----------------------------------------------------------------------*/ -int twl4030_sih_setup(int module); +int twl4030_sih_setup(struct device *dev, int module, int irq_base); /* Offsets to Power Registers */ #define TWL4030_VDAC_DEV_GRP 0x3B diff --git a/include/linux/i2o.h b/include/linux/i2o.h index a6deef4f4f67..d23c3c20b201 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -24,6 +24,7 @@ #define I2O_MAX_DRIVERS 8 #include <linux/pci.h> +#include <linux/bug.h> #include <linux/dma-mapping.h> #include <linux/string.h> #include <linux/slab.h> diff --git a/include/linux/ide.h b/include/linux/ide.h index 501370b61ee5..b17974917dbf 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -14,7 +14,6 @@ #include <linux/interrupt.h> #include <linux/bitops.h> #include <linux/bio.h> -#include <linux/device.h> #include <linux/pci.h> #include <linux/completion.h> #include <linux/pm.h> @@ -23,7 +22,6 @@ #include <acpi/acpi.h> #endif #include <asm/byteorder.h> -#include <asm/system.h> #include <asm/io.h> /* for request_sense */ @@ -43,6 +41,8 @@ #define ERROR_RESET 3 /* Reset controller every 4th retry */ #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */ +struct device; + /* Error codes returned in rq->errors to the higher part of the driver. */ enum { IDE_DRV_ERROR_GENERAL = 101, diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index 33a6e1951d4d..a810987cb80e 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -17,6 +17,7 @@ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/rtnetlink.h> +#include <linux/bug.h> #define VLAN_HLEN 4 /* The additional bytes required by VLAN * (in addition to the Ethernet header) diff --git a/include/linux/input.h b/include/linux/input.h index 3862e32c4eeb..a81671453575 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -114,6 +114,31 @@ struct input_keymap_entry { #define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ #define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ +/** + * EVIOCGMTSLOTS(len) - get MT slot values + * + * The ioctl buffer argument should be binary equivalent to + * + * struct input_mt_request_layout { + * __u32 code; + * __s32 values[num_slots]; + * }; + * + * where num_slots is the (arbitrary) number of MT slots to extract. + * + * The ioctl size argument (len) is the size of the buffer, which + * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is + * too small to fit all available slots, the first num_slots are + * returned. + * + * Before the call, code is set to the wanted ABS_MT event type. On + * return, values[] is filled with the slot values for the specified + * ABS_MT code. + * + * If the request code is not an ABS_MT value, -EINVAL is returned. + */ +#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) + #define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ #define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ #define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ @@ -129,6 +154,8 @@ struct input_keymap_entry { #define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ +#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ + /* * Device properties and quirks */ diff --git a/include/linux/input/cyttsp.h b/include/linux/input/cyttsp.h new file mode 100644 index 000000000000..5af7c66f1fca --- /dev/null +++ b/include/linux/input/cyttsp.h @@ -0,0 +1,58 @@ +/* + * Header file for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com) + * + */ +#ifndef _CYTTSP_H_ +#define _CYTTSP_H_ + +#define CY_SPI_NAME "cyttsp-spi" +#define CY_I2C_NAME "cyttsp-i2c" +/* Active Power state scanning/processing refresh interval */ +#define CY_ACT_INTRVL_DFLT 0x00 /* ms */ +/* touch timeout for the Active power */ +#define CY_TCH_TMOUT_DFLT 0xFF /* ms */ +/* Low Power state scanning/processing refresh interval */ +#define CY_LP_INTRVL_DFLT 0x0A /* ms */ +/* Active distance in pixels for a gesture to be reported */ +#define CY_ACT_DIST_DFLT 0xF8 /* pixels */ + +struct cyttsp_platform_data { + u32 maxx; + u32 maxy; + bool use_hndshk; + u8 act_dist; /* Active distance */ + u8 act_intrvl; /* Active refresh interval; ms */ + u8 tch_tmout; /* Active touch timeout; ms */ + u8 lp_intrvl; /* Low power refresh interval; ms */ + int (*init)(void); + void (*exit)(void); + char *name; + s16 irq_gpio; + u8 *bl_keys; +}; + +#endif /* _CYTTSP_H_ */ diff --git a/include/linux/input/ili210x.h b/include/linux/input/ili210x.h new file mode 100644 index 000000000000..a5471245a13c --- /dev/null +++ b/include/linux/input/ili210x.h @@ -0,0 +1,10 @@ +#ifndef _ILI210X_H +#define _ILI210X_H + +struct ili210x_platform_data { + unsigned long irq_flags; + unsigned int poll_period; + bool (*get_pendown_state)(void); +}; + +#endif diff --git a/include/linux/input/kxtj9.h b/include/linux/input/kxtj9.h index f6bac89537b8..d415579b56fe 100644 --- a/include/linux/input/kxtj9.h +++ b/include/linux/input/kxtj9.h @@ -24,6 +24,7 @@ struct kxtj9_platform_data { unsigned int min_interval; /* minimum poll interval (in milli-seconds) */ + unsigned int init_interval; /* initial poll interval (in milli-seconds) */ /* * By default, x is axis 0, y is axis 1, z is axis 2; these can be @@ -52,16 +53,6 @@ struct kxtj9_platform_data { #define KXTJ9_G_8G (1 << 4) u8 g_range; - /* DATA_CTRL_REG: controls the output data rate of the part */ - #define ODR12_5F 0 - #define ODR25F 1 - #define ODR50F 2 - #define ODR100F 3 - #define ODR200F 4 - #define ODR400F 5 - #define ODR800F 6 - u8 data_odr_init; - int (*init)(void); void (*exit)(void); int (*power_on)(void); diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index fe7c4b9ae270..6c07ced0af81 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -3,6 +3,7 @@ #include <linux/types.h> #include <linux/input.h> +#include <linux/of.h> #define MATRIX_MAX_ROWS 32 #define MATRIX_MAX_COLS 32 @@ -106,4 +107,22 @@ matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, __clear_bit(KEY_RESERVED, keybit); } +#ifdef CONFIG_INPUT_OF_MATRIX_KEYMAP +struct matrix_keymap_data * +matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname); + +void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd); +#else +static inline struct matrix_keymap_data * +matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname) +{ + return NULL; +} + +static inline void +matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd) +{ +} +#endif + #endif /* _MATRIX_KEYPAD_H */ diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index 318bb82325a6..f86737586e19 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -48,10 +48,14 @@ static inline void input_mt_slot(struct input_dev *dev, int slot) input_event(dev, EV_ABS, ABS_MT_SLOT, slot); } +static inline bool input_is_mt_value(int axis) +{ + return axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST; +} + static inline bool input_is_mt_axis(int axis) { - return axis == ABS_MT_SLOT || - (axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST); + return axis == ABS_MT_SLOT || input_is_mt_value(axis); } void input_mt_report_slot_state(struct input_dev *dev, diff --git a/include/linux/input/ti_tscadc.h b/include/linux/input/ti_tscadc.h new file mode 100644 index 000000000000..b10a527a92a4 --- /dev/null +++ b/include/linux/input/ti_tscadc.h @@ -0,0 +1,17 @@ +#ifndef __LINUX_TI_TSCADC_H +#define __LINUX_TI_TSCADC_H + +/** + * struct tsc_data Touchscreen wire configuration + * @wires: Wires refer to application modes + * i.e. 4/5/8 wire touchscreen support + * on the platform. + * @x_plate_resistance: X plate resistance. + */ + +struct tsc_data { + int wires; + int x_plate_resistance; +}; + +#endif diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 3f830e005118..2aea5d22db07 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -19,7 +19,6 @@ #include <linux/atomic.h> #include <asm/ptrace.h> -#include <asm/system.h> /* * These correspond to the IORESOURCE_IRQ_* defines in diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index e44e84f0156c..657fab4efab3 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -20,6 +20,7 @@ #include <linux/types.h> #include <linux/slab.h> +#include <linux/bug.h> #include <asm/io.h> #include <asm/page.h> diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 9d57a71775b5..e885ba23de70 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -23,12 +23,6 @@ struct resource { struct resource *parent, *sibling, *child; }; -struct resource_list { - struct resource_list *next; - struct resource *res; - struct pci_dev *dev; -}; - /* * IO resources have these defined flags. */ diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index bbd156bb953b..48dcba9b2065 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -220,10 +220,10 @@ struct kernel_ipmi_msg { * The in-kernel interface. */ #include <linux/list.h> -#include <linux/device.h> #include <linux/proc_fs.h> struct module; +struct device; /* Opaque type for a IPMI message user. One of these is needed to send and receive messages. */ diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h index 3ef0d8b6aa6f..fcb5d44ea635 100644 --- a/include/linux/ipmi_smi.h +++ b/include/linux/ipmi_smi.h @@ -36,10 +36,11 @@ #include <linux/ipmi_msgdefs.h> #include <linux/proc_fs.h> -#include <linux/device.h> #include <linux/platform_device.h> #include <linux/ipmi.h> +struct device; + /* This files describes the interface for IPMI system management interface drivers to bind into the IPMI message handler. */ diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h index 062d20f74322..42bf725751af 100644 --- a/include/linux/ivtv.h +++ b/include/linux/ivtv.h @@ -58,7 +58,11 @@ struct ivtv_dma_frame { __u32 src_height; }; -#define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame) +#define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame) + +/* Select the passthrough mode (if the argument is non-zero). In the passthrough + mode the output of the encoder is passed immediately into the decoder. */ +#define IVTV_IOC_PASSTHROUGH_MODE _IOW ('V', BASE_VIDIOC_PRIVATE+1, int) /* Deprecated defines: applications should use the defines from videodev2.h */ #define IVTV_SLICED_TYPE_TELETEXT_B V4L2_MPEG_VBI_IVTV_TELETEXT_B diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 5557baefed60..912c30a8ddb1 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -971,6 +971,10 @@ extern void __journal_clean_data_list(transaction_t *transaction); /* Log buffer allocation */ extern struct journal_head * jbd2_journal_get_descriptor_buffer(journal_t *); int jbd2_journal_next_log_block(journal_t *, unsigned long long *); +int jbd2_journal_get_log_tail(journal_t *journal, tid_t *tid, + unsigned long *block); +void __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block); +void jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block); /* Commit management */ extern void jbd2_journal_commit_transaction(journal_t *); @@ -1020,6 +1024,11 @@ jbd2_journal_write_metadata_buffer(transaction_t *transaction, /* Transaction locking */ extern void __wait_on_journal (journal_t *); +/* Transaction cache support */ +extern void jbd2_journal_destroy_transaction_cache(void); +extern int jbd2_journal_init_transaction_cache(void); +extern void jbd2_journal_free_transaction(transaction_t *); + /* * Journal locking. * @@ -1082,7 +1091,8 @@ extern int jbd2_journal_destroy (journal_t *); extern int jbd2_journal_recover (journal_t *journal); extern int jbd2_journal_wipe (journal_t *, int); extern int jbd2_journal_skip_recovery (journal_t *); -extern void jbd2_journal_update_superblock (journal_t *, int); +extern void jbd2_journal_update_sb_log_tail (journal_t *, tid_t, + unsigned long, int); extern void __jbd2_journal_abort_hard (journal_t *); extern void jbd2_journal_abort (journal_t *, int); extern int jbd2_journal_errno (journal_t *); diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h index 423cb6d78ee0..c18b46f8aeeb 100644 --- a/include/linux/journal-head.h +++ b/include/linux/journal-head.h @@ -66,6 +66,8 @@ struct journal_head { * transaction (if there is one). Only applies to buffers on a * transaction's data or metadata journaling list. * [j_list_lock] [jbd_lock_bh_state()] + * Either of these locks is enough for reading, both are needed for + * changes. */ transaction_t *b_transaction; diff --git a/include/linux/jz4740-adc.h b/include/linux/jz4740-adc.h index 9053f95e9687..8184578fbfa4 100644 --- a/include/linux/jz4740-adc.h +++ b/include/linux/jz4740-adc.h @@ -2,7 +2,7 @@ #ifndef __LINUX_JZ4740_ADC #define __LINUX_JZ4740_ADC -#include <linux/device.h> +struct device; /* * jz4740_adc_set_config - Configure a JZ4740 adc device diff --git a/include/linux/kernel.h b/include/linux/kernel.h index d801acb5e680..a5375e7f3fea 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -1,6 +1,8 @@ #ifndef _LINUX_KERNEL_H #define _LINUX_KERNEL_H +#include <linux/sysinfo.h> + /* * 'kernel.h' contains some often-used function prototypes etc */ @@ -20,7 +22,6 @@ #include <linux/printk.h> #include <linux/dynamic_debug.h> #include <asm/byteorder.h> -#include <asm/bug.h> #define USHRT_MAX ((u16)(~0U)) #define SHRT_MAX ((s16)(USHRT_MAX>>1)) @@ -312,6 +313,8 @@ extern long long simple_strtoll(const char *,char **,unsigned int); #define strict_strtoull kstrtoull #define strict_strtoll kstrtoll +extern int num_to_str(char *buf, int size, unsigned long long num); + /* lib/printf utilities */ extern __printf(2, 3) int sprintf(char *buf, const char * fmt, ...); @@ -328,10 +331,10 @@ extern __printf(2, 3) char *kasprintf(gfp_t gfp, const char *fmt, ...); extern char *kvasprintf(gfp_t gfp, const char *fmt, va_list args); -extern int sscanf(const char *, const char *, ...) - __attribute__ ((format (scanf, 2, 3))); -extern int vsscanf(const char *, const char *, va_list) - __attribute__ ((format (scanf, 2, 0))); +extern __scanf(2, 3) +int sscanf(const char *, const char *, ...); +extern __scanf(2, 0) +int vsscanf(const char *, const char *, va_list); extern int get_option(char **str, int *pint); extern char *get_options(const char *str, int nints, int *ints); @@ -675,67 +678,6 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { } const typeof( ((type *)0)->member ) *__mptr = (ptr); \ (type *)( (char *)__mptr - offsetof(type,member) );}) -#ifdef __CHECKER__ -#define BUILD_BUG_ON_NOT_POWER_OF_2(n) -#define BUILD_BUG_ON_ZERO(e) (0) -#define BUILD_BUG_ON_NULL(e) ((void*)0) -#define BUILD_BUG_ON(condition) -#define BUILD_BUG() (0) -#else /* __CHECKER__ */ - -/* Force a compilation error if a constant expression is not a power of 2 */ -#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \ - BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0)) - -/* Force a compilation error if condition is true, but also produce a - result (of value 0 and type size_t), so the expression can be used - e.g. in a structure initializer (or where-ever else comma expressions - aren't permitted). */ -#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) -#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); })) - -/** - * BUILD_BUG_ON - break compile if a condition is true. - * @condition: the condition which the compiler should know is false. - * - * If you have some code which relies on certain constants being equal, or - * other compile-time-evaluated condition, you should use BUILD_BUG_ON to - * detect if someone changes it. - * - * The implementation uses gcc's reluctance to create a negative array, but - * gcc (as of 4.4) only emits that error for obvious cases (eg. not arguments - * to inline functions). So as a fallback we use the optimizer; if it can't - * prove the condition is false, it will cause a link error on the undefined - * "__build_bug_on_failed". This error message can be harder to track down - * though, hence the two different methods. - */ -#ifndef __OPTIMIZE__ -#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) -#else -extern int __build_bug_on_failed; -#define BUILD_BUG_ON(condition) \ - do { \ - ((void)sizeof(char[1 - 2*!!(condition)])); \ - if (condition) __build_bug_on_failed = 1; \ - } while(0) -#endif - -/** - * BUILD_BUG - break compile if used. - * - * If you have some code that you expect the compiler to eliminate at - * build time, you should use BUILD_BUG to detect if it is - * unexpectedly used. - */ -#define BUILD_BUG() \ - do { \ - extern void __build_bug_failed(void) \ - __linktime_error("BUILD_BUG failed"); \ - __build_bug_failed(); \ - } while (0) - -#endif /* __CHECKER__ */ - /* Trap pasters of __FUNCTION__ at compile-time */ #define __FUNCTION__ (__func__) @@ -758,27 +700,8 @@ extern int __build_bug_on_failed; # define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD #endif -struct sysinfo; extern int do_sysinfo(struct sysinfo *info); #endif /* __KERNEL__ */ -#define SI_LOAD_SHIFT 16 -struct sysinfo { - long uptime; /* Seconds since boot */ - unsigned long loads[3]; /* 1, 5, and 15 minute load averages */ - unsigned long totalram; /* Total usable main memory size */ - unsigned long freeram; /* Available memory size */ - unsigned long sharedram; /* Amount of shared memory */ - unsigned long bufferram; /* Memory used by buffers */ - unsigned long totalswap; /* Total swap space size */ - unsigned long freeswap; /* swap space still available */ - unsigned short procs; /* Number of current processes */ - unsigned short pad; /* explicit padding for m68k */ - unsigned long totalhigh; /* Total high memory size */ - unsigned long freehigh; /* Available high memory size */ - unsigned int mem_unit; /* Memory unit size in bytes */ - char _f[20-2*sizeof(long)-sizeof(int)]; /* Padding: libc5 uses this.. */ -}; - #endif diff --git a/include/linux/key.h b/include/linux/key.h index 1600ebf717a7..96933b1e5d24 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -277,6 +277,8 @@ static inline key_serial_t key_serial(const struct key *key) return key ? key->serial : 0; } +extern void key_set_timeout(struct key *, unsigned); + /** * key_is_instantiated - Determine if a key has been positively instantiated * @key: The key to check. diff --git a/include/linux/kmod.h b/include/linux/kmod.h index 722f477c4ef7..9efeae679106 100644 --- a/include/linux/kmod.h +++ b/include/linux/kmod.h @@ -48,11 +48,10 @@ static inline int request_module_nowait(const char *name, ...) { return -ENOSYS; struct cred; struct file; -enum umh_wait { - UMH_NO_WAIT = -1, /* don't wait at all */ - UMH_WAIT_EXEC = 0, /* wait for the exec, but not the process */ - UMH_WAIT_PROC = 1, /* wait for the process to complete */ -}; +#define UMH_NO_WAIT 0 /* don't wait at all */ +#define UMH_WAIT_EXEC 1 /* wait for the exec, but not the process */ +#define UMH_WAIT_PROC 2 /* wait for the process to complete */ +#define UMH_KILLABLE 4 /* wait for EXEC/PROC killable */ struct subprocess_info { struct work_struct work; @@ -60,7 +59,7 @@ struct subprocess_info { char *path; char **argv; char **envp; - enum umh_wait wait; + int wait; int retval; int (*init)(struct subprocess_info *info, struct cred *new); void (*cleanup)(struct subprocess_info *info); @@ -78,15 +77,14 @@ void call_usermodehelper_setfns(struct subprocess_info *info, void *data); /* Actually execute the sub-process */ -int call_usermodehelper_exec(struct subprocess_info *info, enum umh_wait wait); +int call_usermodehelper_exec(struct subprocess_info *info, int wait); /* Free the subprocess_info. This is only needed if you're not going to call call_usermodehelper_exec */ void call_usermodehelper_freeinfo(struct subprocess_info *info); static inline int -call_usermodehelper_fns(char *path, char **argv, char **envp, - enum umh_wait wait, +call_usermodehelper_fns(char *path, char **argv, char **envp, int wait, int (*init)(struct subprocess_info *info, struct cred *new), void (*cleanup)(struct subprocess_info *), void *data) { @@ -104,7 +102,7 @@ call_usermodehelper_fns(char *path, char **argv, char **envp, } static inline int -call_usermodehelper(char *path, char **argv, char **envp, enum umh_wait wait) +call_usermodehelper(char *path, char **argv, char **envp, int wait) { return call_usermodehelper_fns(path, argv, envp, wait, NULL, NULL, NULL); diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index dce6e4dbeda7..b6e1f8c00577 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -33,6 +33,7 @@ #include <linux/list.h> #include <linux/notifier.h> #include <linux/smp.h> +#include <linux/bug.h> #include <linux/percpu.h> #include <linux/spinlock.h> #include <linux/rcupdate.h> diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 68e67e50d028..6c322a90b92f 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -162,6 +162,7 @@ struct kvm_pit_config { #define KVM_EXIT_INTERNAL_ERROR 17 #define KVM_EXIT_OSI 18 #define KVM_EXIT_PAPR_HCALL 19 +#define KVM_EXIT_S390_UCONTROL 20 /* For KVM_EXIT_INTERNAL_ERROR */ #define KVM_INTERNAL_ERROR_EMULATION 1 @@ -249,6 +250,11 @@ struct kvm_run { #define KVM_S390_RESET_CPU_INIT 8 #define KVM_S390_RESET_IPL 16 __u64 s390_reset_flags; + /* KVM_EXIT_S390_UCONTROL */ + struct { + __u64 trans_exc_code; + __u32 pgm_code; + } s390_ucontrol; /* KVM_EXIT_DCR */ struct { __u32 dcrn; @@ -273,6 +279,20 @@ struct kvm_run { /* Fix the size of the union. */ char padding[256]; }; + + /* + * shared registers between kvm and userspace. + * kvm_valid_regs specifies the register classes set by the host + * kvm_dirty_regs specified the register classes dirtied by userspace + * struct kvm_sync_regs is architecture specific, as well as the + * bits for kvm_valid_regs and kvm_dirty_regs + */ + __u64 kvm_valid_regs; + __u64 kvm_dirty_regs; + union { + struct kvm_sync_regs regs; + char padding[1024]; + } s; }; /* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */ @@ -431,6 +451,11 @@ struct kvm_ppc_pvinfo { #define KVMIO 0xAE +/* machine type bits, to be used as argument to KVM_CREATE_VM */ +#define KVM_VM_S390_UCONTROL 1 + +#define KVM_S390_SIE_PAGE_OFFSET 1 + /* * ioctls for /dev/kvm fds: */ @@ -555,9 +580,15 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_PPC_SMT 64 #define KVM_CAP_PPC_RMA 65 #define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */ +#define KVM_CAP_PPC_HIOR 67 #define KVM_CAP_PPC_PAPR 68 +#define KVM_CAP_SW_TLB 69 +#define KVM_CAP_ONE_REG 70 #define KVM_CAP_S390_GMAP 71 #define KVM_CAP_TSC_DEADLINE_TIMER 72 +#define KVM_CAP_S390_UCONTROL 73 +#define KVM_CAP_SYNC_REGS 74 +#define KVM_CAP_PCI_2_3 75 #ifdef KVM_CAP_IRQ_ROUTING @@ -637,6 +668,52 @@ struct kvm_clock_data { __u32 pad[9]; }; +#define KVM_MMU_FSL_BOOKE_NOHV 0 +#define KVM_MMU_FSL_BOOKE_HV 1 + +struct kvm_config_tlb { + __u64 params; + __u64 array; + __u32 mmu_type; + __u32 array_len; +}; + +struct kvm_dirty_tlb { + __u64 bitmap; + __u32 num_dirty; +}; + +/* Available with KVM_CAP_ONE_REG */ + +#define KVM_REG_ARCH_MASK 0xff00000000000000ULL +#define KVM_REG_GENERIC 0x0000000000000000ULL + +/* + * Architecture specific registers are to be defined in arch headers and + * ORed with the arch identifier. + */ +#define KVM_REG_PPC 0x1000000000000000ULL +#define KVM_REG_X86 0x2000000000000000ULL +#define KVM_REG_IA64 0x3000000000000000ULL +#define KVM_REG_ARM 0x4000000000000000ULL +#define KVM_REG_S390 0x5000000000000000ULL + +#define KVM_REG_SIZE_SHIFT 52 +#define KVM_REG_SIZE_MASK 0x00f0000000000000ULL +#define KVM_REG_SIZE_U8 0x0000000000000000ULL +#define KVM_REG_SIZE_U16 0x0010000000000000ULL +#define KVM_REG_SIZE_U32 0x0020000000000000ULL +#define KVM_REG_SIZE_U64 0x0030000000000000ULL +#define KVM_REG_SIZE_U128 0x0040000000000000ULL +#define KVM_REG_SIZE_U256 0x0050000000000000ULL +#define KVM_REG_SIZE_U512 0x0060000000000000ULL +#define KVM_REG_SIZE_U1024 0x0070000000000000ULL + +struct kvm_one_reg { + __u64 id; + __u64 addr; +}; + /* * ioctls for VM fds */ @@ -655,6 +732,17 @@ struct kvm_clock_data { struct kvm_userspace_memory_region) #define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47) #define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64) + +/* enable ucontrol for s390 */ +struct kvm_s390_ucas_mapping { + __u64 user_addr; + __u64 vcpu_addr; + __u64 length; +}; +#define KVM_S390_UCAS_MAP _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping) +#define KVM_S390_UCAS_UNMAP _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping) +#define KVM_S390_VCPU_FAULT _IOW(KVMIO, 0x52, unsigned long) + /* Device model IOC */ #define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60) #define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level) @@ -697,6 +785,9 @@ struct kvm_clock_data { /* Available with KVM_CAP_TSC_CONTROL */ #define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2) #define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3) +/* Available with KVM_CAP_PCI_2_3 */ +#define KVM_ASSIGN_SET_INTX_MASK _IOW(KVMIO, 0xa4, \ + struct kvm_assigned_pci_dev) /* * ioctls for vcpu fds @@ -763,8 +854,15 @@ struct kvm_clock_data { #define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce) /* Available with KVM_CAP_RMA */ #define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) +/* Available with KVM_CAP_SW_TLB */ +#define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb) +/* Available with KVM_CAP_ONE_REG */ +#define KVM_GET_ONE_REG _IOW(KVMIO, 0xab, struct kvm_one_reg) +#define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg) #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) +#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1) +#define KVM_DEV_ASSIGN_MASK_INTX (1 << 2) struct kvm_assigned_pci_dev { __u32 assigned_dev_id; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 900c76337e8f..665a260c7e09 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -13,6 +13,7 @@ #include <linux/spinlock.h> #include <linux/signal.h> #include <linux/sched.h> +#include <linux/bug.h> #include <linux/mm.h> #include <linux/mmu_notifier.h> #include <linux/preempt.h> @@ -171,11 +172,6 @@ static inline int kvm_vcpu_exiting_guest_mode(struct kvm_vcpu *vcpu) */ #define KVM_MEM_MAX_NR_PAGES ((1UL << 31) - 1) -struct kvm_lpage_info { - unsigned long rmap_pde; - int write_count; -}; - struct kvm_memory_slot { gfn_t base_gfn; unsigned long npages; @@ -184,7 +180,7 @@ struct kvm_memory_slot { unsigned long *dirty_bitmap; unsigned long *dirty_bitmap_head; unsigned long nr_dirty_pages; - struct kvm_lpage_info *lpage_info[KVM_NR_PAGE_SIZES - 1]; + struct kvm_arch_memory_slot arch; unsigned long userspace_addr; int user_alloc; int id; @@ -376,6 +372,9 @@ int kvm_set_memory_region(struct kvm *kvm, int __kvm_set_memory_region(struct kvm *kvm, struct kvm_userspace_memory_region *mem, int user_alloc); +void kvm_arch_free_memslot(struct kvm_memory_slot *free, + struct kvm_memory_slot *dont); +int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages); int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, struct kvm_memory_slot old, @@ -385,6 +384,7 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, struct kvm_userspace_memory_region *mem, struct kvm_memory_slot old, int user_alloc); +bool kvm_largepages_enabled(void); void kvm_disable_largepages(void); void kvm_arch_flush_shadow(struct kvm *kvm); @@ -450,6 +450,7 @@ long kvm_arch_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); +int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf); int kvm_dev_ioctl_check_extension(long ext); @@ -520,7 +521,7 @@ static inline void kvm_arch_free_vm(struct kvm *kvm) } #endif -int kvm_arch_init_vm(struct kvm *kvm); +int kvm_arch_init_vm(struct kvm *kvm, unsigned long type); void kvm_arch_destroy_vm(struct kvm *kvm); void kvm_free_all_assigned_devices(struct kvm *kvm); void kvm_arch_sync_events(struct kvm *kvm); @@ -546,6 +547,7 @@ struct kvm_assigned_dev_kernel { unsigned int entries_nr; int host_irq; bool host_irq_disabled; + bool pci_2_3; struct msix_entry *host_msix_entries; int guest_irq; struct msix_entry *guest_msix_entries; @@ -555,6 +557,7 @@ struct kvm_assigned_dev_kernel { struct pci_dev *dev; struct kvm *kvm; spinlock_t intx_lock; + spinlock_t intx_mask_lock; char irq_name[32]; struct pci_saved_state *pci_saved_state; }; @@ -650,11 +653,43 @@ static inline void kvm_guest_exit(void) current->flags &= ~PF_VCPU; } +/* + * search_memslots() and __gfn_to_memslot() are here because they are + * used in non-modular code in arch/powerpc/kvm/book3s_hv_rm_mmu.c. + * gfn_to_memslot() itself isn't here as an inline because that would + * bloat other code too much. + */ +static inline struct kvm_memory_slot * +search_memslots(struct kvm_memslots *slots, gfn_t gfn) +{ + struct kvm_memory_slot *memslot; + + kvm_for_each_memslot(memslot, slots) + if (gfn >= memslot->base_gfn && + gfn < memslot->base_gfn + memslot->npages) + return memslot; + + return NULL; +} + +static inline struct kvm_memory_slot * +__gfn_to_memslot(struct kvm_memslots *slots, gfn_t gfn) +{ + return search_memslots(slots, gfn); +} + static inline int memslot_id(struct kvm *kvm, gfn_t gfn) { return gfn_to_memslot(kvm, gfn)->id; } +static inline gfn_t gfn_to_index(gfn_t gfn, gfn_t base_gfn, int level) +{ + /* KVM_HPAGE_GFN_SHIFT(PT_PAGE_TABLE_LEVEL) must be 0. */ + return (gfn >> KVM_HPAGE_GFN_SHIFT(level)) - + (base_gfn >> KVM_HPAGE_GFN_SHIFT(level)); +} + static inline unsigned long gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn) { @@ -701,12 +736,16 @@ static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_se if (unlikely(vcpu->kvm->mmu_notifier_count)) return 1; /* - * Both reads happen under the mmu_lock and both values are - * modified under mmu_lock, so there's no need of smb_rmb() - * here in between, otherwise mmu_notifier_count should be - * read before mmu_notifier_seq, see - * mmu_notifier_invalidate_range_end write side. + * Ensure the read of mmu_notifier_count happens before the read + * of mmu_notifier_seq. This interacts with the smp_wmb() in + * mmu_notifier_invalidate_range_end to make sure that the caller + * either sees the old (non-zero) value of mmu_notifier_count or + * the new (incremented) value of mmu_notifier_seq. + * PowerPC Book3s HV KVM calls this under a per-page lock + * rather than under kvm->mmu_lock, for scalability, so + * can't rely on kvm->mmu_lock to keep things ordered. */ + smp_rmb(); if (vcpu->kvm->mmu_notifier_seq != mmu_seq) return 1; return 0; @@ -769,6 +808,13 @@ static inline bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu) { return vcpu->kvm->bsp_vcpu_id == vcpu->vcpu_id; } + +bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu); + +#else + +static inline bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu) { return true; } + #endif #ifdef __KVM_HAVE_DEVICE_ASSIGNMENT diff --git a/include/linux/led-lm3530.h b/include/linux/led-lm3530.h index 8eb12357a110..eeae6e742471 100644 --- a/include/linux/led-lm3530.h +++ b/include/linux/led-lm3530.h @@ -72,6 +72,12 @@ enum lm3530_als_mode { LM3530_INPUT_CEIL, /* Max of ALS1 and ALS2 */ }; +/* PWM Platform Specific Data */ +struct lm3530_pwm_data { + void (*pwm_set_intensity) (int brightness, int max_brightness); + int (*pwm_get_intensity) (int max_brightness); +}; + /** * struct lm3530_platform_data * @mode: mode of operation i.e. Manual, ALS or PWM @@ -87,6 +93,7 @@ enum lm3530_als_mode { * @als_vmin: als input voltage calibrated for max brightness in mV * @als_vmax: als input voltage calibrated for min brightness in mV * @brt_val: brightness value (0-255) + * @pwm_data: PWM control functions (only valid when the mode is PWM) */ struct lm3530_platform_data { enum lm3530_mode mode; @@ -107,6 +114,8 @@ struct lm3530_platform_data { u32 als_vmax; u8 brt_val; + + struct lm3530_pwm_data pwm_data; }; #endif /* _LINUX_LED_LM3530_H__ */ diff --git a/include/linux/leds-lp5521.h b/include/linux/leds-lp5521.h index fd548d2a8775..3f071ec019b2 100644 --- a/include/linux/leds-lp5521.h +++ b/include/linux/leds-lp5521.h @@ -26,15 +26,37 @@ /* See Documentation/leds/leds-lp5521.txt */ struct lp5521_led_config { + char *name; u8 chan_nr; u8 led_current; /* mA x10, 0 if led is not connected */ u8 max_current; }; +struct lp5521_led_pattern { + u8 *r; + u8 *g; + u8 *b; + u8 size_r; + u8 size_g; + u8 size_b; +}; + #define LP5521_CLOCK_AUTO 0 #define LP5521_CLOCK_INT 1 #define LP5521_CLOCK_EXT 2 +/* Bits in CONFIG register */ +#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ +#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ +#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ +#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ +#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ +#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ +#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ +#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ +#define LP5521_CLK_INT 1 /* Internal clock */ +#define LP5521_CLK_AUTO 2 /* Automatic clock selection */ + struct lp5521_platform_data { struct lp5521_led_config *led_config; u8 num_channels; @@ -43,6 +65,9 @@ struct lp5521_platform_data { void (*release_resources)(void); void (*enable)(bool state); const char *label; + u8 update_config; + struct lp5521_led_pattern *patterns; + int num_patterns; }; #endif /* __LINUX_LP5521_H */ diff --git a/include/linux/libata.h b/include/linux/libata.h index cafc09a64fe4..42378d637ffb 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -996,6 +996,7 @@ extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev, extern void ata_sas_port_destroy(struct ata_port *); extern struct ata_port *ata_sas_port_alloc(struct ata_host *, struct ata_port_info *, struct Scsi_Host *); +extern int ata_sas_async_port_init(struct ata_port *); extern int ata_sas_port_init(struct ata_port *); extern int ata_sas_port_start(struct ata_port *ap); extern void ata_sas_port_stop(struct ata_port *ap); @@ -1147,6 +1148,7 @@ static inline int ata_acpi_cbl_80wire(struct ata_port *ap, * EH - drivers/ata/libata-eh.c */ extern void ata_port_schedule_eh(struct ata_port *ap); +extern void ata_port_wait_eh(struct ata_port *ap); extern int ata_link_abort(struct ata_link *link); extern int ata_port_abort(struct ata_port *ap); extern int ata_port_freeze(struct ata_port *ap); diff --git a/include/linux/llist.h b/include/linux/llist.h index 801b44b07aac..a5199f6d0e82 100644 --- a/include/linux/llist.h +++ b/include/linux/llist.h @@ -56,8 +56,7 @@ */ #include <linux/kernel.h> -#include <asm/system.h> -#include <asm/processor.h> +#include <asm/cmpxchg.h> struct llist_head { struct llist_node *first; diff --git a/include/linux/lockd/bind.h b/include/linux/lockd/bind.h index fbc48f898521..11a966e5f829 100644 --- a/include/linux/lockd/bind.h +++ b/include/linux/lockd/bind.h @@ -42,6 +42,7 @@ struct nlmclnt_initdata { unsigned short protocol; u32 nfs_version; int noresvport; + struct net *net; }; /* diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index 88a114fce477..f04ce6ac6d04 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -67,6 +67,7 @@ struct nlm_host { struct list_head h_reclaim; /* Locks in RECLAIM state */ struct nsm_handle *h_nsmhandle; /* NSM status handle */ char *h_addrbuf; /* address eyecatcher */ + struct net *net; /* host net */ }; /* @@ -188,7 +189,7 @@ struct nlm_block { /* * Global variables */ -extern struct rpc_program nlm_program; +extern const struct rpc_program nlm_program; extern struct svc_procedure nlmsvc_procedures[]; #ifdef CONFIG_LOCKD_V4 extern struct svc_procedure nlmsvc_procedures4[]; @@ -222,7 +223,8 @@ struct nlm_host *nlmclnt_lookup_host(const struct sockaddr *sap, const unsigned short protocol, const u32 version, const char *hostname, - int noresvport); + int noresvport, + struct net *net); void nlmclnt_release_host(struct nlm_host *); struct nlm_host *nlmsvc_lookup_host(const struct svc_rqst *rqstp, const char *hostname, @@ -232,6 +234,7 @@ struct rpc_clnt * nlm_bind_host(struct nlm_host *); void nlm_rebind_host(struct nlm_host *); struct nlm_host * nlm_get_host(struct nlm_host *); void nlm_shutdown_hosts(void); +void nlm_shutdown_hosts_net(struct net *net); void nlm_host_rebooted(const struct nlm_reboot *); /* diff --git a/include/linux/lockd/xdr4.h b/include/linux/lockd/xdr4.h index 7353821341ed..e58c88b52ce1 100644 --- a/include/linux/lockd/xdr4.h +++ b/include/linux/lockd/xdr4.h @@ -42,6 +42,6 @@ int nlmclt_encode_lockargs(struct rpc_rqst *, u32 *, struct nlm_args *); int nlmclt_encode_cancargs(struct rpc_rqst *, u32 *, struct nlm_args *); int nlmclt_encode_unlockargs(struct rpc_rqst *, u32 *, struct nlm_args *); */ -extern struct rpc_version nlm_version4; +extern const struct rpc_version nlm_version4; #endif /* LOCKD_XDR4_H */ diff --git a/include/linux/lp855x.h b/include/linux/lp855x.h new file mode 100644 index 000000000000..781a490a451b --- /dev/null +++ b/include/linux/lp855x.h @@ -0,0 +1,131 @@ +/* + * LP855x Backlight Driver + * + * Copyright (C) 2011 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _LP855X_H +#define _LP855X_H + +#define BL_CTL_SHFT (0) +#define BRT_MODE_SHFT (1) +#define BRT_MODE_MASK (0x06) + +/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */ +#define ENABLE_BL (1) +#define DISABLE_BL (0) + +#define I2C_CONFIG(id) id ## _I2C_CONFIG +#define PWM_CONFIG(id) id ## _PWM_CONFIG + +/* DEVICE CONTROL register - LP8550 */ +#define LP8550_PWM_CONFIG (LP8550_PWM_ONLY << BRT_MODE_SHFT) +#define LP8550_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ + (LP8550_I2C_ONLY << BRT_MODE_SHFT)) + +/* DEVICE CONTROL register - LP8551 */ +#define LP8551_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8551_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8552 */ +#define LP8552_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8552_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8553 */ +#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8556 */ +#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT) +#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT) +#define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ + (LP8556_I2C_ONLY << BRT_MODE_SHFT)) +#define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT) + +/* ROM area boundary */ +#define EEPROM_START (0xA0) +#define EEPROM_END (0xA7) +#define EPROM_START (0xA0) +#define EPROM_END (0xAF) + +enum lp855x_chip_id { + LP8550, + LP8551, + LP8552, + LP8553, + LP8556, +}; + +enum lp855x_brightness_ctrl_mode { + PWM_BASED = 1, + REGISTER_BASED, +}; + +enum lp8550_brighntess_source { + LP8550_PWM_ONLY, + LP8550_I2C_ONLY = 2, +}; + +enum lp8551_brighntess_source { + LP8551_PWM_ONLY = LP8550_PWM_ONLY, + LP8551_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8552_brighntess_source { + LP8552_PWM_ONLY = LP8550_PWM_ONLY, + LP8552_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8553_brighntess_source { + LP8553_PWM_ONLY = LP8550_PWM_ONLY, + LP8553_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8556_brightness_source { + LP8556_PWM_ONLY, + LP8556_COMBINED1, /* pwm + i2c before the shaper block */ + LP8556_I2C_ONLY, + LP8556_COMBINED2, /* pwm + i2c after the shaper block */ +}; + +struct lp855x_pwm_data { + void (*pwm_set_intensity) (int brightness, int max_brightness); + int (*pwm_get_intensity) (int max_brightness); +}; + +struct lp855x_rom_data { + u8 addr; + u8 val; +}; + +/** + * struct lp855x_platform_data + * @name : Backlight driver name. If it is not defined, default name is set. + * @mode : brightness control by pwm or lp855x register + * @device_control : value of DEVICE CONTROL register + * @initial_brightness : initial value of backlight brightness + * @pwm_data : platform specific pwm generation functions. + Only valid when mode is PWM_BASED. + * @load_new_rom_data : + 0 : use default configuration data + 1 : update values of eeprom or eprom registers on loading driver + * @size_program : total size of lp855x_rom_data + * @rom_data : list of new eeprom/eprom registers + */ +struct lp855x_platform_data { + char *name; + enum lp855x_brightness_ctrl_mode mode; + u8 device_control; + int initial_brightness; + struct lp855x_pwm_data pwm_data; + u8 load_new_rom_data; + int size_program; + struct lp855x_rom_data *rom_data; +}; + +#endif diff --git a/include/linux/lsm_audit.h b/include/linux/lsm_audit.h index 88e78dedc2e8..eab507f2b1cb 100644 --- a/include/linux/lsm_audit.h +++ b/include/linux/lsm_audit.h @@ -21,7 +21,6 @@ #include <linux/path.h> #include <linux/key.h> #include <linux/skbuff.h> -#include <asm/system.h> /* Auxiliary data to use in generating the audit record. */ diff --git a/include/linux/magic.h b/include/linux/magic.h index b7ed4759dbb2..e15192cb9cf4 100644 --- a/include/linux/magic.h +++ b/include/linux/magic.h @@ -9,7 +9,6 @@ #define CRAMFS_MAGIC 0x28cd3d45 /* some random number */ #define CRAMFS_MAGIC_WEND 0x453dcd28 /* magic number with the wrong endianess */ #define DEBUGFS_MAGIC 0x64626720 -#define SYSFS_MAGIC 0x62656572 #define SECURITYFS_MAGIC 0x73636673 #define SELINUX_MAGIC 0xf97cff8c #define RAMFS_MAGIC 0x858458f6 /* some random number */ @@ -27,7 +26,6 @@ #define HPFS_SUPER_MAGIC 0xf995e849 #define ISOFS_SUPER_MAGIC 0x9660 #define JFFS2_SUPER_MAGIC 0x72b6 -#define ANON_INODE_FS_MAGIC 0x09041934 #define PSTOREFS_MAGIC 0x6165676C #define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */ @@ -40,7 +38,6 @@ #define NCP_SUPER_MAGIC 0x564c /* Guess, what 0x564c is :-) */ #define NFS_SUPER_MAGIC 0x6969 #define OPENPROM_SUPER_MAGIC 0x9fa1 -#define PROC_SUPER_MAGIC 0x9fa0 #define QNX4_SUPER_MAGIC 0x002f /* qnx4 fs detection */ #define QNX6_SUPER_MAGIC 0x68191122 /* qnx6 fs detection */ @@ -52,15 +49,24 @@ #define REISER2FS_JR_SUPER_MAGIC_STRING "ReIsEr3Fs" #define SMB_SUPER_MAGIC 0x517B -#define USBDEVICE_SUPER_MAGIC 0x9fa2 #define CGROUP_SUPER_MAGIC 0x27e0eb -#define FUTEXFS_SUPER_MAGIC 0xBAD1DEA #define STACK_END_MAGIC 0x57AC6E9D +#define V9FS_MAGIC 0x01021997 + +#define BDEVFS_MAGIC 0x62646576 +#define BINFMTFS_MAGIC 0x42494e4d #define DEVPTS_SUPER_MAGIC 0x1cd1 +#define FUTEXFS_SUPER_MAGIC 0xBAD1DEA +#define PIPEFS_MAGIC 0x50495045 +#define PROC_SUPER_MAGIC 0x9fa0 #define SOCKFS_MAGIC 0x534F434B -#define V9FS_MAGIC 0x01021997 +#define SYSFS_MAGIC 0x62656572 +#define USBDEVICE_SUPER_MAGIC 0x9fa2 +#define MTD_INODE_FS_MAGIC 0x11307854 +#define ANON_INODE_FS_MAGIC 0x09041934 + #endif /* __LINUX_MAGIC_H__ */ diff --git a/include/linux/maple.h b/include/linux/maple.h index d9a51b9b3300..c37288b23e0c 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -1,9 +1,9 @@ #ifndef __LINUX_MAPLE_H #define __LINUX_MAPLE_H -#include <linux/device.h> #include <mach/maple.h> +struct device; extern struct bus_type maple_bus_type; /* Maple Bus command and response codes */ diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 0b8e2a742600..910550f3b70e 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -4,6 +4,7 @@ #include <linux/mmzone.h> #include <linux/spinlock.h> #include <linux/notifier.h> +#include <linux/bug.h> struct page; struct zone; diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index 92be3476c9f5..84d071ade1d8 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -263,6 +263,22 @@ enum { #define PM8607_PD_PREBIAS_MASK (0x1F << 0) #define PM8607_PD_PRECHG_MASK (7 << 5) +#define PM8606_REF_GP_OSC_OFF 0 +#define PM8606_REF_GP_OSC_ON 1 +#define PM8606_REF_GP_OSC_UNKNOWN 2 + +/* Clients of reference group and 8MHz oscillator in 88PM8606 */ +enum pm8606_ref_gp_and_osc_clients { + REF_GP_NO_CLIENTS = 0, + WLED1_DUTY = (1<<0), /*PF 0x02.7:0*/ + WLED2_DUTY = (1<<1), /*PF 0x04.7:0*/ + WLED3_DUTY = (1<<2), /*PF 0x06.7:0*/ + RGB1_ENABLE = (1<<3), /*PF 0x07.1*/ + RGB2_ENABLE = (1<<4), /*PF 0x07.2*/ + LDO_VBR_EN = (1<<5), /*PF 0x12.0*/ + REF_GP_MAX_CLIENT = 0xFFFF +}; + /* Interrupt Number in 88PM8607 */ enum { PM8607_IRQ_ONKEY, @@ -298,6 +314,7 @@ enum { struct pm860x_chip { struct device *dev; struct mutex irq_lock; + struct mutex osc_lock; struct i2c_client *client; struct i2c_client *companion; /* companion chip client */ struct regmap *regmap; @@ -305,12 +322,15 @@ struct pm860x_chip { int buck3_double; /* DVC ramp slope double */ unsigned short companion_addr; + unsigned short osc_vote; int id; int irq_mode; int irq_base; int core_irq; unsigned char chip_version; + unsigned char osc_status; + unsigned int wakeup_flag; }; enum { @@ -369,6 +389,9 @@ struct pm860x_platform_data { int num_regulators; }; +extern int pm8606_osc_enable(struct pm860x_chip *, unsigned short); +extern int pm8606_osc_disable(struct pm860x_chip *, unsigned short); + extern int pm860x_reg_read(struct i2c_client *, int); extern int pm860x_reg_write(struct i2c_client *, int, unsigned char); extern int pm860x_bulk_read(struct i2c_client *, int, int, unsigned char *); diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 9970337ff041..5fa697477b71 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -14,9 +14,10 @@ * Author: Rickard Andersson <rickard.andersson@stericsson.com> */ -#include <linux/device.h> #include <linux/regulator/machine.h> +struct device; + #ifndef MFD_ABX500_H #define MFD_ABX500_H @@ -33,13 +34,6 @@ #define AB5500_1_1 0x21 #define AB5500_2_0 0x24 -/* AB8500 CIDs*/ -#define AB8500_CUT1P0 0x10 -#define AB8500_CUT1P1 0x11 -#define AB8500_CUT2P0 0x20 -#define AB8500_CUT3P0 0x30 -#define AB8500_CUT3P3 0x33 - /* * AB3100, EVENTA1, A2 and A3 event register flags * these are catenated into a single 32-bit flag in the code diff --git a/include/linux/mfd/abx500/ab5500.h b/include/linux/mfd/abx500/ab5500.h index a720051ae933..54f820ed73bb 100644 --- a/include/linux/mfd/abx500/ab5500.h +++ b/include/linux/mfd/abx500/ab5500.h @@ -6,7 +6,7 @@ #ifndef MFD_AB5500_H #define MFD_AB5500_H -#include <linux/device.h> +struct device; enum ab5500_devid { AB5500_DEVID_ADC, diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h index 488a8c920a29..2387c207ea86 100644 --- a/include/linux/mfd/abx500/ab8500-gpio.h +++ b/include/linux/mfd/abx500/ab8500-gpio.h @@ -10,12 +10,14 @@ /* * Platform data to register a block: only the initial gpio/irq number. + * Array sizes are large enough to contain all AB8500 and AB9540 GPIO + * registers. */ struct ab8500_gpio_platform_data { int gpio_base; u32 irq_base; - u8 config_reg[7]; + u8 config_reg[8]; }; #endif /* _AB8500_GPIO_H */ diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h index 10da0291f8f8..10eb50973c39 100644 --- a/include/linux/mfd/abx500/ab8500-sysctrl.h +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -71,6 +71,13 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) #define AB8500_SWATCTRL 0x230 #define AB8500_HIQCLKCTRL 0x232 #define AB8500_VSIMSYSCLKCTRL 0x233 +#define AB9540_SYSCLK12BUFCTRL 0x234 +#define AB9540_SYSCLK12CONFCTRL 0x235 +#define AB9540_SYSCLK12BUFCTRL2 0x236 +#define AB9540_SYSCLK12BUF1VALID 0x237 +#define AB9540_SYSCLK12BUF2VALID 0x238 +#define AB9540_SYSCLK12BUF3VALID 0x239 +#define AB9540_SYSCLK12BUF4VALID 0x23A /* Bits */ #define AB8500_TURNONSTATUS_PORNVBAT BIT(0) @@ -251,4 +258,40 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) #define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6) #define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1ENA BIT(0) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2ENA BIT(1) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3ENA BIT(2) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4ENA BIT(3) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFENA_MASK 0x0F +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1STRE BIT(4) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2STRE BIT(5) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3STRE BIT(6) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4STRE BIT(7) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFSTRE_MASK 0xF0 + +#define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1) +#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_MASK 0x0C +#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_SHIFT 2 +#define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6) + +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF1PDENA BIT(0) +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF2PDENA BIT(1) +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF3PDENA BIT(2) +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF4PDENA BIT(3) + +#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_SHIFT 0 + +#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_SHIFT 0 + +#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_SHIFT 0 + +#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0 + #endif /* __AB8500_SYSCTRL_H */ diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 838c6b487cc5..fccc3002f271 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -7,7 +7,32 @@ #ifndef MFD_AB8500_H #define MFD_AB8500_H -#include <linux/device.h> +#include <linux/mutex.h> + +struct device; + +/* + * AB IC versions + * + * AB8500_VERSION_AB8500 should be 0xFF but will never be read as need a + * non-supported multi-byte I2C access via PRCMU. Set to 0x00 to ease the + * print of version string. + */ +enum ab8500_version { + AB8500_VERSION_AB8500 = 0x0, + AB8500_VERSION_AB8505 = 0x1, + AB8500_VERSION_AB9540 = 0x2, + AB8500_VERSION_AB8540 = 0x3, + AB8500_VERSION_UNDEFINED, +}; + +/* AB8500 CIDs*/ +#define AB8500_CUTEARLY 0x00 +#define AB8500_CUT1P0 0x10 +#define AB8500_CUT1P1 0x11 +#define AB8500_CUT2P0 0x20 +#define AB8500_CUT3P0 0x30 +#define AB8500_CUT3P3 0x33 /* * AB8500 bank addresses @@ -35,30 +60,34 @@ /* * Interrupts + * Values used to index into array ab8500_irq_regoffset[] defined in + * drivers/mdf/ab8500-core.c */ - -#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 -#define AB8500_INT_UN_PLUG_TV_DET 1 -#define AB8500_INT_PLUG_TV_DET 2 +/* Definitions for AB8500 and AB9540 */ +/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */ +#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 /* not 8505/9540 */ +#define AB8500_INT_UN_PLUG_TV_DET 1 /* not 8505/9540 */ +#define AB8500_INT_PLUG_TV_DET 2 /* not 8505/9540 */ #define AB8500_INT_TEMP_WARM 3 #define AB8500_INT_PON_KEY2DB_F 4 #define AB8500_INT_PON_KEY2DB_R 5 #define AB8500_INT_PON_KEY1DB_F 6 #define AB8500_INT_PON_KEY1DB_R 7 +/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */ #define AB8500_INT_BATT_OVV 8 -#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 -#define AB8500_INT_MAIN_CH_PLUG_DET 11 -#define AB8500_INT_USB_ID_DET_F 12 -#define AB8500_INT_USB_ID_DET_R 13 +#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 /* not 8505 */ +#define AB8500_INT_MAIN_CH_PLUG_DET 11 /* not 8505 */ #define AB8500_INT_VBUS_DET_F 14 #define AB8500_INT_VBUS_DET_R 15 +/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */ #define AB8500_INT_VBUS_CH_DROP_END 16 #define AB8500_INT_RTC_60S 17 #define AB8500_INT_RTC_ALARM 18 #define AB8500_INT_BAT_CTRL_INDB 20 #define AB8500_INT_CH_WD_EXP 21 #define AB8500_INT_VBUS_OVV 22 -#define AB8500_INT_MAIN_CH_DROP_END 23 +#define AB8500_INT_MAIN_CH_DROP_END 23 /* not 8505/9540 */ +/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */ #define AB8500_INT_CCN_CONV_ACC 24 #define AB8500_INT_INT_AUD 25 #define AB8500_INT_CCEOC 26 @@ -67,7 +96,8 @@ #define AB8500_INT_LOW_BAT_R 29 #define AB8500_INT_BUP_CHG_NOT_OK 30 #define AB8500_INT_BUP_CHG_OK 31 -#define AB8500_INT_GP_HW_ADC_CONV_END 32 +/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */ +#define AB8500_INT_GP_HW_ADC_CONV_END 32 /* not 8505 */ #define AB8500_INT_ACC_DETECT_1DB_F 33 #define AB8500_INT_ACC_DETECT_1DB_R 34 #define AB8500_INT_ACC_DETECT_22DB_F 35 @@ -75,38 +105,43 @@ #define AB8500_INT_ACC_DETECT_21DB_F 37 #define AB8500_INT_ACC_DETECT_21DB_R 38 #define AB8500_INT_GP_SW_ADC_CONV_END 39 -#define AB8500_INT_GPIO6R 40 -#define AB8500_INT_GPIO7R 41 -#define AB8500_INT_GPIO8R 42 -#define AB8500_INT_GPIO9R 43 +/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */ +#define AB8500_INT_GPIO6R 40 /* not 8505/9540 */ +#define AB8500_INT_GPIO7R 41 /* not 8505/9540 */ +#define AB8500_INT_GPIO8R 42 /* not 8505/9540 */ +#define AB8500_INT_GPIO9R 43 /* not 8505/9540 */ #define AB8500_INT_GPIO10R 44 #define AB8500_INT_GPIO11R 45 -#define AB8500_INT_GPIO12R 46 +#define AB8500_INT_GPIO12R 46 /* not 8505 */ #define AB8500_INT_GPIO13R 47 -#define AB8500_INT_GPIO24R 48 -#define AB8500_INT_GPIO25R 49 -#define AB8500_INT_GPIO36R 50 -#define AB8500_INT_GPIO37R 51 -#define AB8500_INT_GPIO38R 52 -#define AB8500_INT_GPIO39R 53 +/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */ +#define AB8500_INT_GPIO24R 48 /* not 8505 */ +#define AB8500_INT_GPIO25R 49 /* not 8505 */ +#define AB8500_INT_GPIO36R 50 /* not 8505/9540 */ +#define AB8500_INT_GPIO37R 51 /* not 8505/9540 */ +#define AB8500_INT_GPIO38R 52 /* not 8505/9540 */ +#define AB8500_INT_GPIO39R 53 /* not 8505/9540 */ #define AB8500_INT_GPIO40R 54 #define AB8500_INT_GPIO41R 55 -#define AB8500_INT_GPIO6F 56 -#define AB8500_INT_GPIO7F 57 -#define AB8500_INT_GPIO8F 58 -#define AB8500_INT_GPIO9F 59 +/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */ +#define AB8500_INT_GPIO6F 56 /* not 8505/9540 */ +#define AB8500_INT_GPIO7F 57 /* not 8505/9540 */ +#define AB8500_INT_GPIO8F 58 /* not 8505/9540 */ +#define AB8500_INT_GPIO9F 59 /* not 8505/9540 */ #define AB8500_INT_GPIO10F 60 #define AB8500_INT_GPIO11F 61 -#define AB8500_INT_GPIO12F 62 +#define AB8500_INT_GPIO12F 62 /* not 8505 */ #define AB8500_INT_GPIO13F 63 -#define AB8500_INT_GPIO24F 64 -#define AB8500_INT_GPIO25F 65 -#define AB8500_INT_GPIO36F 66 -#define AB8500_INT_GPIO37F 67 -#define AB8500_INT_GPIO38F 68 -#define AB8500_INT_GPIO39F 69 +/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */ +#define AB8500_INT_GPIO24F 64 /* not 8505 */ +#define AB8500_INT_GPIO25F 65 /* not 8505 */ +#define AB8500_INT_GPIO36F 66 /* not 8505/9540 */ +#define AB8500_INT_GPIO37F 67 /* not 8505/9540 */ +#define AB8500_INT_GPIO38F 68 /* not 8505/9540 */ +#define AB8500_INT_GPIO39F 69 /* not 8505/9540 */ #define AB8500_INT_GPIO40F 70 #define AB8500_INT_GPIO41F 71 +/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */ #define AB8500_INT_ADP_SOURCE_ERROR 72 #define AB8500_INT_ADP_SINK_ERROR 73 #define AB8500_INT_ADP_PROBE_PLUG 74 @@ -114,30 +149,67 @@ #define AB8500_INT_ADP_SENSE_OFF 76 #define AB8500_INT_USB_PHY_POWER_ERR 78 #define AB8500_INT_USB_LINK_STATUS 79 +/* ab8500_irq_regoffset[10] -> IT[Source|Latch|Mask]19 */ #define AB8500_INT_BTEMP_LOW 80 #define AB8500_INT_BTEMP_LOW_MEDIUM 81 #define AB8500_INT_BTEMP_MEDIUM_HIGH 82 #define AB8500_INT_BTEMP_HIGH 83 -#define AB8500_INT_USB_CHARGER_NOT_OK 89 +/* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */ +#define AB8500_INT_SRP_DETECT 88 +#define AB8500_INT_USB_CHARGER_NOT_OKR 89 #define AB8500_INT_ID_WAKEUP_R 90 #define AB8500_INT_ID_DET_R1R 92 #define AB8500_INT_ID_DET_R2R 93 #define AB8500_INT_ID_DET_R3R 94 #define AB8500_INT_ID_DET_R4R 95 +/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */ #define AB8500_INT_ID_WAKEUP_F 96 #define AB8500_INT_ID_DET_R1F 98 #define AB8500_INT_ID_DET_R2F 99 #define AB8500_INT_ID_DET_R3F 100 #define AB8500_INT_ID_DET_R4F 101 -#define AB8500_INT_USB_CHG_DET_DONE 102 +#define AB8500_INT_CHAUTORESTARTAFTSEC 102 +#define AB8500_INT_CHSTOPBYSEC 103 +/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */ #define AB8500_INT_USB_CH_TH_PROT_F 104 #define AB8500_INT_USB_CH_TH_PROT_R 105 -#define AB8500_INT_MAIN_CH_TH_PROT_F 106 -#define AB8500_INT_MAIN_CH_TH_PROT_R 107 -#define AB8500_INT_USB_CHARGER_NOT_OKF 111 +#define AB8500_INT_MAIN_CH_TH_PROT_F 106 /* not 8505/9540 */ +#define AB8500_INT_MAIN_CH_TH_PROT_R 107 /* not 8505/9540 */ +#define AB8500_INT_CHCURLIMNOHSCHIRP 109 +#define AB8500_INT_CHCURLIMHSCHIRP 110 +#define AB8500_INT_XTAL32K_KO 111 +/* Definitions for AB9540 */ +/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */ +#define AB9540_INT_GPIO50R 113 +#define AB9540_INT_GPIO51R 114 /* not 8505 */ +#define AB9540_INT_GPIO52R 115 +#define AB9540_INT_GPIO53R 116 +#define AB9540_INT_GPIO54R 117 /* not 8505 */ +#define AB9540_INT_IEXT_CH_RF_BFN_R 118 +#define AB9540_INT_IEXT_CH_RF_BFN_F 119 +/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */ +#define AB9540_INT_GPIO50F 121 +#define AB9540_INT_GPIO51F 122 /* not 8505 */ +#define AB9540_INT_GPIO52F 123 +#define AB9540_INT_GPIO53F 124 +#define AB9540_INT_GPIO54F 125 /* not 8505 */ + +/* + * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the + * entire platform. This is a "compile time" constant so this must be set to + * the largest possible value that may be encountered with different AB SOCs. + * Of the currently supported AB devices, AB8500 and AB9540, it is the AB9540 + * which is larger. + */ #define AB8500_NR_IRQS 112 +#define AB8505_NR_IRQS 128 +#define AB9540_NR_IRQS 128 +/* This is set to the roof of any AB8500 chip variant IRQ counts */ +#define AB8500_MAX_NR_IRQS AB9540_NR_IRQS + #define AB8500_NUM_IRQ_REGS 14 +#define AB9540_NUM_IRQ_REGS 17 /** * struct ab8500 - ab8500 internal structure @@ -145,13 +217,18 @@ * @lock: read/write operations lock * @irq_lock: genirq bus lock * @irq: irq line + * @version: chip version id (e.g. ab8500 or ab9540) * @chip_id: chip revision id * @write: register write + * @write_masked: masked register write * @read: register read * @rx_buf: rx buf for SPI * @tx_buf: tx buf for SPI * @mask: cache of IRQ regs for bus lock * @oldmask: cache of previous IRQ regs for bus lock + * @mask_size: Actual number of valid entries in mask[], oldmask[] and + * irq_reg_offset + * @irq_reg_offset: Array of offsets into IRQ registers */ struct ab8500 { struct device *dev; @@ -160,16 +237,20 @@ struct ab8500 { int irq_base; int irq; + enum ab8500_version version; u8 chip_id; - int (*write) (struct ab8500 *a8500, u16 addr, u8 data); - int (*read) (struct ab8500 *a8500, u16 addr); + int (*write)(struct ab8500 *ab8500, u16 addr, u8 data); + int (*write_masked)(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data); + int (*read)(struct ab8500 *ab8500, u16 addr); unsigned long tx_buf[4]; unsigned long rx_buf[4]; - u8 mask[AB8500_NUM_IRQ_REGS]; - u8 oldmask[AB8500_NUM_IRQ_REGS]; + u8 *mask; + u8 *oldmask; + int mask_size; + const int *irq_reg_offset; }; struct regulator_reg_init; @@ -195,7 +276,52 @@ struct ab8500_platform_data { struct ab8500_gpio_platform_data *gpio; }; -extern int __devinit ab8500_init(struct ab8500 *ab8500); +extern int __devinit ab8500_init(struct ab8500 *ab8500, + enum ab8500_version version); extern int __devexit ab8500_exit(struct ab8500 *ab8500); +static inline int is_ab8500(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB8500; +} + +static inline int is_ab8505(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB8505; +} + +static inline int is_ab9540(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB9540; +} + +static inline int is_ab8540(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB8540; +} + +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_1p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P0)); +} + +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_1p1_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P1)); +} + +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0)); +} + +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_2p0(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0)); +} + #endif /* MFD_AB8500_H */ diff --git a/include/linux/mfd/anatop.h b/include/linux/mfd/anatop.h new file mode 100644 index 000000000000..22c1007d3ec5 --- /dev/null +++ b/include/linux/mfd/anatop.h @@ -0,0 +1,40 @@ +/* + * anatop.h - Anatop MFD driver + * + * Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> + * Copyright (C) 2012 Linaro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_MFD_ANATOP_H +#define __LINUX_MFD_ANATOP_H + +#include <linux/spinlock.h> + +/** + * anatop - MFD data + * @ioreg: ioremap register + * @reglock: spinlock for register read/write + */ +struct anatop { + void *ioreg; + spinlock_t reglock; +}; + +extern u32 anatop_get_bits(struct anatop *, u32, int, int); +extern void anatop_set_bits(struct anatop *, u32, int, int, u32); + +#endif /* __LINUX_MFD_ANATOP_H */ diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h index 5702d1be13b4..7ffbd6e9e7fc 100644 --- a/include/linux/mfd/da9052/da9052.h +++ b/include/linux/mfd/da9052/da9052.h @@ -76,8 +76,6 @@ enum da9052_chip_id { struct da9052_pdata; struct da9052 { - struct mutex io_lock; - struct device *dev; struct regmap *regmap; diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 60d27f7bfc1f..b3a43b1263fe 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -11,6 +11,24 @@ #define __MFD_DB8500_PRCMU_H #include <linux/interrupt.h> +#include <linux/bitops.h> + +/* + * Registers + */ +#define DB8500_PRCM_GPIOCR 0x138 +#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0 BIT(0) +#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD BIT(9) +#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 BIT(11) +#define DB8500_PRCM_GPIOCR_SPI2_SELECT BIT(23) + +#define DB8500_PRCM_LINE_VALUE 0x170 +#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0 BIT(3) + +#define DB8500_PRCM_DSI_SW_RESET 0x324 +#define DB8500_PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0) +#define DB8500_PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1) +#define DB8500_PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2) /* This portion previously known as <mach/prcmu-fw-defs_v1.h> */ @@ -421,40 +439,22 @@ enum auto_enable { /* End of file previously known as prcmu-fw-defs_v1.h */ /** - * enum hw_acc_dev - enum for hw accelerators - * @HW_ACC_SVAMMDSP: for SVAMMDSP - * @HW_ACC_SVAPIPE: for SVAPIPE - * @HW_ACC_SIAMMDSP: for SIAMMDSP - * @HW_ACC_SIAPIPE: for SIAPIPE - * @HW_ACC_SGA: for SGA - * @HW_ACC_B2R2: for B2R2 - * @HW_ACC_MCDE: for MCDE - * @HW_ACC_ESRAM1: for ESRAM1 - * @HW_ACC_ESRAM2: for ESRAM2 - * @HW_ACC_ESRAM3: for ESRAM3 - * @HW_ACC_ESRAM4: for ESRAM4 - * @NUM_HW_ACC: number of hardware accelerators - * - * Different hw accelerators which can be turned ON/ - * OFF or put into retention (MMDSPs and ESRAMs). - * Used with EPOD API. + * enum prcmu_power_status - results from set_power_state + * @PRCMU_SLEEP_OK: Sleep went ok + * @PRCMU_DEEP_SLEEP_OK: DeepSleep went ok + * @PRCMU_IDLE_OK: Idle went ok + * @PRCMU_DEEPIDLE_OK: DeepIdle went ok + * @PRCMU_PRCMU2ARMPENDINGIT_ER: Pending interrupt detected + * @PRCMU_ARMPENDINGIT_ER: Pending interrupt detected * - * NOTE! Deprecated, to be removed when all users switched over to use the - * regulator API. */ -enum hw_acc_dev { - HW_ACC_SVAMMDSP, - HW_ACC_SVAPIPE, - HW_ACC_SIAMMDSP, - HW_ACC_SIAPIPE, - HW_ACC_SGA, - HW_ACC_B2R2, - HW_ACC_MCDE, - HW_ACC_ESRAM1, - HW_ACC_ESRAM2, - HW_ACC_ESRAM3, - HW_ACC_ESRAM4, - NUM_HW_ACC +enum prcmu_power_status { + PRCMU_SLEEP_OK = 0xf3, + PRCMU_DEEP_SLEEP_OK = 0xf6, + PRCMU_IDLE_OK = 0xf0, + PRCMU_DEEPIDLE_OK = 0xe3, + PRCMU_PRCMU2ARMPENDINGIT_ER = 0x91, + PRCMU_ARMPENDINGIT_ER = 0x93, }; /* @@ -493,6 +493,20 @@ struct prcmu_auto_pm_config { u8 sva_policy; }; +#define PRCMU_FW_PROJECT_U8500 2 +#define PRCMU_FW_PROJECT_U9500 4 +#define PRCMU_FW_PROJECT_U8500_C2 7 +#define PRCMU_FW_PROJECT_U9500_C2 11 +#define PRCMU_FW_PROJECT_U8520 13 +#define PRCMU_FW_PROJECT_U8420 14 + +struct prcmu_fw_version { + u8 project; + u8 api_version; + u8 func_version; + u8 errata; +}; + #ifdef CONFIG_MFD_DB8500_PRCMU void db8500_prcmu_early_init(void); @@ -500,42 +514,41 @@ int prcmu_set_rc_a2p(enum romcode_write); enum romcode_read prcmu_get_rc_p2a(void); enum ap_pwrst prcmu_get_xp70_current_state(void); bool prcmu_has_arm_maxopp(void); -bool prcmu_is_u8400(void); -int prcmu_set_ape_opp(u8 opp); -int prcmu_get_ape_opp(void); +struct prcmu_fw_version *prcmu_get_fw_version(void); int prcmu_request_ape_opp_100_voltage(bool enable); int prcmu_release_usb_wakeup_state(void); -int prcmu_set_ddr_opp(u8 opp); -int prcmu_get_ddr_opp(void); -/* NOTE! Use regulator framework instead */ -int prcmu_set_hwacc(u16 hw_acc_dev, u8 state); void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle); bool prcmu_is_auto_pm_enabled(void); int prcmu_config_clkout(u8 clkout, u8 source, u8 div); int prcmu_set_clock_divider(u8 clock, u8 divider); -int prcmu_config_hotdog(u8 threshold); -int prcmu_config_hotmon(u8 low, u8 high); -int prcmu_start_temp_sense(u16 cycles32k); -int prcmu_stop_temp_sense(void); +int db8500_prcmu_config_hotdog(u8 threshold); +int db8500_prcmu_config_hotmon(u8 low, u8 high); +int db8500_prcmu_start_temp_sense(u16 cycles32k); +int db8500_prcmu_stop_temp_sense(void); int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); void prcmu_ac_wake_req(void); void prcmu_ac_sleep_req(void); -void prcmu_modem_reset(void); -void prcmu_enable_spi2(void); -void prcmu_disable_spi2(void); +void db8500_prcmu_modem_reset(void); -int prcmu_config_a9wdog(u8 num, bool sleep_auto_off); -int prcmu_enable_a9wdog(u8 id); -int prcmu_disable_a9wdog(u8 id); -int prcmu_kick_a9wdog(u8 id); -int prcmu_load_a9wdog(u8 id, u32 val); +int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off); +int db8500_prcmu_enable_a9wdog(u8 id); +int db8500_prcmu_disable_a9wdog(u8 id); +int db8500_prcmu_kick_a9wdog(u8 id); +int db8500_prcmu_load_a9wdog(u8 id, u32 val); void db8500_prcmu_system_reset(u16 reset_code); int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); +u8 db8500_prcmu_get_power_state_result(void); +int db8500_prcmu_gic_decouple(void); +int db8500_prcmu_gic_recouple(void); +int db8500_prcmu_copy_gic_settings(void); +bool db8500_prcmu_gic_pending_irq(void); +bool db8500_prcmu_pending_irq(void); +bool db8500_prcmu_is_cpu_in_wfi(int cpu); void db8500_prcmu_enable_wakeups(u32 wakeups); int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state); int db8500_prcmu_request_clock(u8 clock, bool enable); @@ -549,6 +562,14 @@ u16 db8500_prcmu_get_reset_code(void); bool db8500_prcmu_is_ac_wake_requested(void); int db8500_prcmu_set_arm_opp(u8 opp); int db8500_prcmu_get_arm_opp(void); +int db8500_prcmu_set_ape_opp(u8 opp); +int db8500_prcmu_get_ape_opp(void); +int db8500_prcmu_set_ddr_opp(u8 opp); +int db8500_prcmu_get_ddr_opp(void); + +u32 db8500_prcmu_read(unsigned int reg); +void db8500_prcmu_write(unsigned int reg, u32 value); +void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value); #else /* !CONFIG_MFD_DB8500_PRCMU */ @@ -574,17 +595,17 @@ static inline bool prcmu_has_arm_maxopp(void) return false; } -static inline bool prcmu_is_u8400(void) +static inline struct prcmu_fw_version *prcmu_get_fw_version(void) { - return false; + return NULL; } -static inline int prcmu_set_ape_opp(u8 opp) +static inline int db8500_prcmu_set_ape_opp(u8 opp) { return 0; } -static inline int prcmu_get_ape_opp(void) +static inline int db8500_prcmu_get_ape_opp(void) { return APE_100_OPP; } @@ -599,21 +620,16 @@ static inline int prcmu_release_usb_wakeup_state(void) return 0; } -static inline int prcmu_set_ddr_opp(u8 opp) +static inline int db8500_prcmu_set_ddr_opp(u8 opp) { return 0; } -static inline int prcmu_get_ddr_opp(void) +static inline int db8500_prcmu_get_ddr_opp(void) { return DDR_100_OPP; } -static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state) -{ - return 0; -} - static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle) { @@ -634,22 +650,22 @@ static inline int prcmu_set_clock_divider(u8 clock, u8 divider) return 0; } -static inline int prcmu_config_hotdog(u8 threshold) +static inline int db8500_prcmu_config_hotdog(u8 threshold) { return 0; } -static inline int prcmu_config_hotmon(u8 low, u8 high) +static inline int db8500_prcmu_config_hotmon(u8 low, u8 high) { return 0; } -static inline int prcmu_start_temp_sense(u16 cycles32k) +static inline int db8500_prcmu_start_temp_sense(u16 cycles32k) { return 0; } -static inline int prcmu_stop_temp_sense(void) +static inline int db8500_prcmu_stop_temp_sense(void) { return 0; } @@ -668,22 +684,17 @@ static inline void prcmu_ac_wake_req(void) {} static inline void prcmu_ac_sleep_req(void) {} -static inline void prcmu_modem_reset(void) {} +static inline void db8500_prcmu_modem_reset(void) {} -static inline int prcmu_enable_spi2(void) -{ - return 0; -} +static inline void db8500_prcmu_system_reset(u16 reset_code) {} -static inline int prcmu_disable_spi2(void) +static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, + bool keep_ap_pll) { return 0; } -static inline void db8500_prcmu_system_reset(u16 reset_code) {} - -static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, - bool keep_ap_pll) +static inline u8 db8500_prcmu_get_power_state_result(void) { return 0; } @@ -729,27 +740,27 @@ static inline u16 db8500_prcmu_get_reset_code(void) return 0; } -static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) +static inline int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off) { return 0; } -static inline int prcmu_enable_a9wdog(u8 id) +static inline int db8500_prcmu_enable_a9wdog(u8 id) { return 0; } -static inline int prcmu_disable_a9wdog(u8 id) +static inline int db8500_prcmu_disable_a9wdog(u8 id) { return 0; } -static inline int prcmu_kick_a9wdog(u8 id) +static inline int db8500_prcmu_kick_a9wdog(u8 id) { return 0; } -static inline int prcmu_load_a9wdog(u8 id, u32 val) +static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val) { return 0; } @@ -769,6 +780,16 @@ static inline int db8500_prcmu_get_arm_opp(void) return 0; } +static inline u32 db8500_prcmu_read(unsigned int reg) +{ + return 0; +} + +static inline void db8500_prcmu_write(unsigned int reg, u32 value) {} + +static inline void db8500_prcmu_write_masked(unsigned int reg, u32 mask, + u32 value) {} + #endif /* !CONFIG_MFD_DB8500_PRCMU */ #endif /* __MFD_DB8500_PRCMU_H */ diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index bac942f959c1..d7674eb7305f 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -10,7 +10,7 @@ #include <linux/interrupt.h> #include <linux/notifier.h> -#include <asm/mach-types.h> +#include <linux/err.h> /* PRCMU Wakeup defines */ enum prcmu_wakeup_index { @@ -80,6 +80,29 @@ enum prcmu_wakeup_index { #define EPOD_STATE_ON_CLK_OFF 0x03 #define EPOD_STATE_ON 0x04 +/* DB5500 CLKOUT IDs */ +enum { + DB5500_CLKOUT0 = 0, + DB5500_CLKOUT1, +}; + +/* DB5500 CLKOUTx sources */ +enum { + DB5500_CLKOUT_REF_CLK_SEL0, + DB5500_CLKOUT_RTC_CLK0_SEL0, + DB5500_CLKOUT_ULP_CLK_SEL0, + DB5500_CLKOUT_STATIC0, + DB5500_CLKOUT_REFCLK, + DB5500_CLKOUT_ULPCLK, + DB5500_CLKOUT_ARMCLK, + DB5500_CLKOUT_SYSACC0CLK, + DB5500_CLKOUT_SOC0PLLCLK, + DB5500_CLKOUT_SOC1PLLCLK, + DB5500_CLKOUT_DDRPLLCLK, + DB5500_CLKOUT_TVCLK, + DB5500_CLKOUT_IRDACLK, +}; + /* * CLKOUT sources */ @@ -111,6 +134,7 @@ enum prcmu_clock { PRCMU_MSP1CLK, PRCMU_I2CCLK, PRCMU_SDMMCCLK, + PRCMU_SPARE1CLK, PRCMU_SLIMCLK, PRCMU_PER1CLK, PRCMU_PER2CLK, @@ -139,12 +163,20 @@ enum prcmu_clock { PRCMU_IRRCCLK, PRCMU_SIACLK, PRCMU_SVACLK, + PRCMU_ACLK, PRCMU_NUM_REG_CLOCKS, PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS, + PRCMU_CDCLK, PRCMU_TIMCLK, PRCMU_PLLSOC0, PRCMU_PLLSOC1, PRCMU_PLLDDR, + PRCMU_PLLDSI, + PRCMU_DSI0CLK, + PRCMU_DSI1CLK, + PRCMU_DSI0ESCCLK, + PRCMU_DSI1ESCCLK, + PRCMU_DSI2ESCCLK, }; /** @@ -153,12 +185,14 @@ enum prcmu_clock { * @APE_NO_CHANGE: The APE operating point is unchanged * @APE_100_OPP: The new APE operating point is ape100opp * @APE_50_OPP: 50% + * @APE_50_PARTLY_25_OPP: 50%, except some clocks at 25%. */ enum ape_opp { APE_OPP_INIT = 0x00, APE_NO_CHANGE = 0x01, APE_100_OPP = 0x02, - APE_50_OPP = 0x03 + APE_50_OPP = 0x03, + APE_50_PARTLY_25_OPP = 0xFF, }; /** @@ -218,9 +252,11 @@ enum ddr_pwrst { #if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500) +#include <mach/id.h> + static inline void __init prcmu_early_init(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_early_init(); else return db8500_prcmu_early_init(); @@ -229,7 +265,7 @@ static inline void __init prcmu_early_init(void) static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_set_power_state(state, keep_ulp_clk, keep_ap_pll); else @@ -237,9 +273,65 @@ static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk, keep_ap_pll); } +static inline u8 prcmu_get_power_state_result(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_get_power_state_result(); +} + +static inline int prcmu_gic_decouple(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_gic_decouple(); +} + +static inline int prcmu_gic_recouple(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_gic_recouple(); +} + +static inline bool prcmu_gic_pending_irq(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_gic_pending_irq(); +} + +static inline bool prcmu_is_cpu_in_wfi(int cpu) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_is_cpu_in_wfi(cpu); +} + +static inline int prcmu_copy_gic_settings(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_copy_gic_settings(); +} + +static inline bool prcmu_pending_irq(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_pending_irq(); +} + static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return -EINVAL; else return db8500_prcmu_set_epod(epod_id, epod_state); @@ -247,7 +339,7 @@ static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) static inline void prcmu_enable_wakeups(u32 wakeups) { - if (machine_is_u5500()) + if (cpu_is_u5500()) db5500_prcmu_enable_wakeups(wakeups); else db8500_prcmu_enable_wakeups(wakeups); @@ -260,7 +352,7 @@ static inline void prcmu_disable_wakeups(void) static inline void prcmu_config_abb_event_readout(u32 abb_events) { - if (machine_is_u5500()) + if (cpu_is_u5500()) db5500_prcmu_config_abb_event_readout(abb_events); else db8500_prcmu_config_abb_event_readout(abb_events); @@ -268,7 +360,7 @@ static inline void prcmu_config_abb_event_readout(u32 abb_events) static inline void prcmu_get_abb_event_buffer(void __iomem **buf) { - if (machine_is_u5500()) + if (cpu_is_u5500()) db5500_prcmu_get_abb_event_buffer(buf); else db8500_prcmu_get_abb_event_buffer(buf); @@ -276,25 +368,40 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf) int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); +int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size); int prcmu_config_clkout(u8 clkout, u8 source, u8 div); static inline int prcmu_request_clock(u8 clock, bool enable) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_request_clock(clock, enable); else return db8500_prcmu_request_clock(clock, enable); } -int prcmu_set_ape_opp(u8 opp); -int prcmu_get_ape_opp(void); -int prcmu_set_ddr_opp(u8 opp); -int prcmu_get_ddr_opp(void); +unsigned long prcmu_clock_rate(u8 clock); +long prcmu_round_clock_rate(u8 clock, unsigned long rate); +int prcmu_set_clock_rate(u8 clock, unsigned long rate); + +static inline int prcmu_set_ddr_opp(u8 opp) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_set_ddr_opp(opp); +} +static inline int prcmu_get_ddr_opp(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_get_ddr_opp(); +} static inline int prcmu_set_arm_opp(u8 opp) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return -EINVAL; else return db8500_prcmu_set_arm_opp(opp); @@ -302,15 +409,31 @@ static inline int prcmu_set_arm_opp(u8 opp) static inline int prcmu_get_arm_opp(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return -EINVAL; else return db8500_prcmu_get_arm_opp(); } +static inline int prcmu_set_ape_opp(u8 opp) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_set_ape_opp(opp); +} + +static inline int prcmu_get_ape_opp(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_get_ape_opp(); +} + static inline void prcmu_system_reset(u16 reset_code) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_system_reset(reset_code); else return db8500_prcmu_system_reset(reset_code); @@ -318,7 +441,7 @@ static inline void prcmu_system_reset(u16 reset_code) static inline u16 prcmu_get_reset_code(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_get_reset_code(); else return db8500_prcmu_get_reset_code(); @@ -326,10 +449,17 @@ static inline u16 prcmu_get_reset_code(void) void prcmu_ac_wake_req(void); void prcmu_ac_sleep_req(void); -void prcmu_modem_reset(void); +static inline void prcmu_modem_reset(void) +{ + if (cpu_is_u5500()) + return; + else + return db8500_prcmu_modem_reset(); +} + static inline bool prcmu_is_ac_wake_requested(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_is_ac_wake_requested(); else return db8500_prcmu_is_ac_wake_requested(); @@ -337,7 +467,7 @@ static inline bool prcmu_is_ac_wake_requested(void) static inline int prcmu_set_display_clocks(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_set_display_clocks(); else return db8500_prcmu_set_display_clocks(); @@ -345,7 +475,7 @@ static inline int prcmu_set_display_clocks(void) static inline int prcmu_disable_dsipll(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_disable_dsipll(); else return db8500_prcmu_disable_dsipll(); @@ -353,7 +483,7 @@ static inline int prcmu_disable_dsipll(void) static inline int prcmu_enable_dsipll(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_enable_dsipll(); else return db8500_prcmu_enable_dsipll(); @@ -361,11 +491,107 @@ static inline int prcmu_enable_dsipll(void) static inline int prcmu_config_esram0_deep_sleep(u8 state) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return -EINVAL; else return db8500_prcmu_config_esram0_deep_sleep(state); } + +static inline int prcmu_config_hotdog(u8 threshold) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_config_hotdog(threshold); +} + +static inline int prcmu_config_hotmon(u8 low, u8 high) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_config_hotmon(low, high); +} + +static inline int prcmu_start_temp_sense(u16 cycles32k) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_start_temp_sense(cycles32k); +} + +static inline int prcmu_stop_temp_sense(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_stop_temp_sense(); +} + +static inline u32 prcmu_read(unsigned int reg) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_read(reg); +} + +static inline void prcmu_write(unsigned int reg, u32 value) +{ + if (cpu_is_u5500()) + return; + else + db8500_prcmu_write(reg, value); +} + +static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) +{ + if (cpu_is_u5500()) + return; + else + db8500_prcmu_write_masked(reg, mask, value); +} + +static inline int prcmu_enable_a9wdog(u8 id) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_enable_a9wdog(id); +} + +static inline int prcmu_disable_a9wdog(u8 id) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_disable_a9wdog(id); +} + +static inline int prcmu_kick_a9wdog(u8 id) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_kick_a9wdog(id); +} + +static inline int prcmu_load_a9wdog(u8 id, u32 timeout) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_load_a9wdog(id, timeout); +} + +static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_config_a9wdog(num, sleep_auto_off); +} #else static inline void __init prcmu_early_init(void) {} @@ -395,6 +621,12 @@ static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) return -ENOSYS; } +static inline int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, + u8 size) +{ + return -ENOSYS; +} + static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div) { return 0; @@ -405,6 +637,21 @@ static inline int prcmu_request_clock(u8 clock, bool enable) return 0; } +static inline long prcmu_round_clock_rate(u8 clock, unsigned long rate) +{ + return 0; +} + +static inline int prcmu_set_clock_rate(u8 clock, unsigned long rate) +{ + return 0; +} + +static inline unsigned long prcmu_clock_rate(u8 clock) +{ + return 0; +} + static inline int prcmu_set_ape_opp(u8 opp) { return 0; @@ -480,14 +727,133 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf) *buf = NULL; } +static inline int prcmu_config_hotdog(u8 threshold) +{ + return 0; +} + +static inline int prcmu_config_hotmon(u8 low, u8 high) +{ + return 0; +} + +static inline int prcmu_start_temp_sense(u16 cycles32k) +{ + return 0; +} + +static inline int prcmu_stop_temp_sense(void) +{ + return 0; +} + +static inline u32 prcmu_read(unsigned int reg) +{ + return 0; +} + +static inline void prcmu_write(unsigned int reg, u32 value) {} + +static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {} + +#endif + +static inline void prcmu_set(unsigned int reg, u32 bits) +{ + prcmu_write_masked(reg, bits, bits); +} + +static inline void prcmu_clear(unsigned int reg, u32 bits) +{ + prcmu_write_masked(reg, bits, 0); +} + +#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500) + +/** + * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1. + */ +static inline void prcmu_enable_spi2(void) +{ + if (cpu_is_u8500()) + prcmu_set(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT); +} + +/** + * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1. + */ +static inline void prcmu_disable_spi2(void) +{ + if (cpu_is_u8500()) + prcmu_clear(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT); +} + +/** + * prcmu_enable_stm_mod_uart - Enables pin muxing for STMMOD + * and UARTMOD on OtherAlternateC3. + */ +static inline void prcmu_enable_stm_mod_uart(void) +{ + if (cpu_is_u8500()) { + prcmu_set(DB8500_PRCM_GPIOCR, + (DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 | + DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0)); + } +} + +/** + * prcmu_disable_stm_mod_uart - Disables pin muxing for STMMOD + * and UARTMOD on OtherAlternateC3. + */ +static inline void prcmu_disable_stm_mod_uart(void) +{ + if (cpu_is_u8500()) { + prcmu_clear(DB8500_PRCM_GPIOCR, + (DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 | + DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0)); + } +} + +/** + * prcmu_enable_stm_ape - Enables pin muxing for STM APE on OtherAlternateC1. + */ +static inline void prcmu_enable_stm_ape(void) +{ + if (cpu_is_u8500()) { + prcmu_set(DB8500_PRCM_GPIOCR, + DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD); + } +} + +/** + * prcmu_disable_stm_ape - Disables pin muxing for STM APE on OtherAlternateC1. + */ +static inline void prcmu_disable_stm_ape(void) +{ + if (cpu_is_u8500()) { + prcmu_clear(DB8500_PRCM_GPIOCR, + DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD); + } +} + +#else + +static inline void prcmu_enable_spi2(void) {} +static inline void prcmu_disable_spi2(void) {} +static inline void prcmu_enable_stm_mod_uart(void) {} +static inline void prcmu_disable_stm_mod_uart(void) {} +static inline void prcmu_enable_stm_ape(void) {} +static inline void prcmu_disable_stm_ape(void) {} + #endif /* PRCMU QoS APE OPP class */ #define PRCMU_QOS_APE_OPP 1 #define PRCMU_QOS_DDR_OPP 2 +#define PRCMU_QOS_ARM_OPP 3 #define PRCMU_QOS_DEFAULT_VALUE -1 -#ifdef CONFIG_UX500_PRCMU_QOS_POWER +#ifdef CONFIG_DBX500_PRCMU_QOS_POWER unsigned long prcmu_qos_get_cpufreq_opp_delay(void); void prcmu_qos_set_cpufreq_opp_delay(unsigned long); diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index fff590521e50..28726dd540f2 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -131,6 +131,55 @@ struct max8997_muic_platform_data { int num_init_data; }; +enum max8997_haptic_motor_type { + MAX8997_HAPTIC_ERM, + MAX8997_HAPTIC_LRA, +}; + +enum max8997_haptic_pulse_mode { + MAX8997_EXTERNAL_MODE, + MAX8997_INTERNAL_MODE, +}; + +enum max8997_haptic_pwm_divisor { + MAX8997_PWM_DIVISOR_32, + MAX8997_PWM_DIVISOR_64, + MAX8997_PWM_DIVISOR_128, + MAX8997_PWM_DIVISOR_256, +}; + +/** + * max8997_haptic_platform_data + * @pwm_channel_id: channel number of PWM device + * valid for MAX8997_EXTERNAL_MODE + * @pwm_period: period in nano second for PWM device + * valid for MAX8997_EXTERNAL_MODE + * @type: motor type + * @mode: pulse mode + * MAX8997_EXTERNAL_MODE: external PWM device is used to control motor + * MAX8997_INTERNAL_MODE: internal pulse generator is used to control motor + * @pwm_divisor: divisor for external PWM device + * @internal_mode_pattern: internal mode pattern for internal mode + * [0 - 3]: valid pattern number + * @pattern_cycle: the number of cycles of the waveform + * for the internal mode pattern + * [0 - 15]: available cycles + * @pattern_signal_period: period of the waveform for the internal mode pattern + * [0 - 255]: available period + */ +struct max8997_haptic_platform_data { + unsigned int pwm_channel_id; + unsigned int pwm_period; + + enum max8997_haptic_motor_type type; + enum max8997_haptic_pulse_mode mode; + enum max8997_haptic_pwm_divisor pwm_divisor; + + unsigned int internal_mode_pattern; + unsigned int pattern_cycle; + unsigned int pattern_signal_period; +}; + enum max8997_led_mode { MAX8997_NONE, MAX8997_FLASH_MODE, @@ -192,7 +241,9 @@ struct max8997_platform_data { /* ---- MUIC ---- */ struct max8997_muic_platform_data *muic_pdata; - /* HAPTIC: Not implemented */ + /* ---- HAPTIC ---- */ + struct max8997_haptic_platform_data *haptic_pdata; + /* RTC: Not implemented */ /* ---- LED ---- */ struct max8997_led_platform_data *led_pdata; diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h index b86ee45c8b03..10e038bac8dd 100644 --- a/include/linux/mfd/mc13xxx.h +++ b/include/linux/mfd/mc13xxx.h @@ -38,7 +38,8 @@ int mc13xxx_irq_ack(struct mc13xxx *mc13xxx, int irq); int mc13xxx_get_flags(struct mc13xxx *mc13xxx); int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, - unsigned int mode, unsigned int channel, unsigned int *sample); + unsigned int mode, unsigned int channel, + u8 ato, bool atox, unsigned int *sample); #define MC13XXX_IRQ_ADCDONE 0 #define MC13XXX_IRQ_ADCBISDONE 1 @@ -157,6 +158,18 @@ struct mc13xxx_buttons_platform_data { unsigned short b3on_key; }; +struct mc13xxx_ts_platform_data { + /* Delay between Touchscreen polarization and ADC Conversion. + * Given in clock ticks of a 32 kHz clock which gives a granularity of + * about 30.5ms */ + u8 ato; + +#define MC13783_TS_ATO_FIRST false +#define MC13783_TS_ATO_EACH true + /* Use the ATO delay only for the first conversion or for each one */ + bool atox; +}; + struct mc13xxx_platform_data { #define MC13XXX_USE_TOUCHSCREEN (1 << 0) #define MC13XXX_USE_CODEC (1 << 1) @@ -167,6 +180,7 @@ struct mc13xxx_platform_data { struct mc13xxx_regulator_platform_data regulators; struct mc13xxx_leds_platform_data *leds; struct mc13xxx_buttons_platform_data *buttons; + struct mc13xxx_ts_platform_data touch; }; #define MC13XXX_ADC_MODE_TS 1 diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h index f88c1cc0cb0f..a9e8bd157673 100644 --- a/include/linux/mfd/mcp.h +++ b/include/linux/mfd/mcp.h @@ -10,8 +10,6 @@ #ifndef MCP_H #define MCP_H -#include <mach/dma.h> - struct mcp_ops; struct mcp { @@ -21,12 +19,7 @@ struct mcp { int use_count; unsigned int sclk_rate; unsigned int rw_timeout; - dma_device_t dma_audio_rd; - dma_device_t dma_audio_wr; - dma_device_t dma_telco_rd; - dma_device_t dma_telco_wr; struct device attached_device; - int gpio_base; }; struct mcp_ops { @@ -47,15 +40,14 @@ void mcp_disable(struct mcp *); #define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate) struct mcp *mcp_host_alloc(struct device *, size_t); -int mcp_host_register(struct mcp *); -void mcp_host_unregister(struct mcp *); +int mcp_host_add(struct mcp *, void *); +void mcp_host_del(struct mcp *); +void mcp_host_free(struct mcp *); struct mcp_driver { struct device_driver drv; int (*probe)(struct mcp *); void (*remove)(struct mcp *); - int (*suspend)(struct mcp *, pm_message_t); - int (*resume)(struct mcp *); }; int mcp_driver_register(struct mcp_driver *); diff --git a/include/linux/mfd/pm8xxx/pm8921.h b/include/linux/mfd/pm8xxx/pm8921.h index d5517fd32d1b..00fa3de7659d 100644 --- a/include/linux/mfd/pm8xxx/pm8921.h +++ b/include/linux/mfd/pm8xxx/pm8921.h @@ -18,7 +18,6 @@ #ifndef __MFD_PM8921_H #define __MFD_PM8921_H -#include <linux/device.h> #include <linux/mfd/pm8xxx/irq.h> #define PM8921_NR_IRQS 256 diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h new file mode 100644 index 000000000000..a2c61609d21d --- /dev/null +++ b/include/linux/mfd/rc5t583.h @@ -0,0 +1,295 @@ +/* + * Core driver interface to access RICOH_RC5T583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan <ldewangan@nvidia.com> + * + * Based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef __LINUX_MFD_RC5T583_H +#define __LINUX_MFD_RC5T583_H + +#include <linux/mutex.h> +#include <linux/types.h> + +#define RC5T583_MAX_REGS 0xF8 + +/* Maximum number of main interrupts */ +#define MAX_MAIN_INTERRUPT 5 +#define RC5T583_MAX_GPEDGE_REG 2 +#define RC5T583_MAX_INTERRUPT_MASK_REGS 9 + +/* Interrupt enable register */ +#define RC5T583_INT_EN_SYS1 0x19 +#define RC5T583_INT_EN_SYS2 0x1D +#define RC5T583_INT_EN_DCDC 0x41 +#define RC5T583_INT_EN_RTC 0xED +#define RC5T583_INT_EN_ADC1 0x90 +#define RC5T583_INT_EN_ADC2 0x91 +#define RC5T583_INT_EN_ADC3 0x92 + +/* Interrupt status registers (monitor regs in Ricoh)*/ +#define RC5T583_INTC_INTPOL 0xAD +#define RC5T583_INTC_INTEN 0xAE +#define RC5T583_INTC_INTMON 0xAF + +#define RC5T583_INT_MON_GRP 0xAF +#define RC5T583_INT_MON_SYS1 0x1B +#define RC5T583_INT_MON_SYS2 0x1F +#define RC5T583_INT_MON_DCDC 0x43 +#define RC5T583_INT_MON_RTC 0xEE + +/* Interrupt clearing registers */ +#define RC5T583_INT_IR_SYS1 0x1A +#define RC5T583_INT_IR_SYS2 0x1E +#define RC5T583_INT_IR_DCDC 0x42 +#define RC5T583_INT_IR_RTC 0xEE +#define RC5T583_INT_IR_ADCL 0x94 +#define RC5T583_INT_IR_ADCH 0x95 +#define RC5T583_INT_IR_ADCEND 0x96 +#define RC5T583_INT_IR_GPIOR 0xA9 +#define RC5T583_INT_IR_GPIOF 0xAA + +/* Sleep sequence registers */ +#define RC5T583_SLPSEQ1 0x21 +#define RC5T583_SLPSEQ2 0x22 +#define RC5T583_SLPSEQ3 0x23 +#define RC5T583_SLPSEQ4 0x24 +#define RC5T583_SLPSEQ5 0x25 +#define RC5T583_SLPSEQ6 0x26 +#define RC5T583_SLPSEQ7 0x27 +#define RC5T583_SLPSEQ8 0x28 +#define RC5T583_SLPSEQ9 0x29 +#define RC5T583_SLPSEQ10 0x2A +#define RC5T583_SLPSEQ11 0x2B + +/* Regulator registers */ +#define RC5T583_REG_DC0CTL 0x30 +#define RC5T583_REG_DC0DAC 0x31 +#define RC5T583_REG_DC0LATCTL 0x32 +#define RC5T583_REG_SR0CTL 0x33 + +#define RC5T583_REG_DC1CTL 0x34 +#define RC5T583_REG_DC1DAC 0x35 +#define RC5T583_REG_DC1LATCTL 0x36 +#define RC5T583_REG_SR1CTL 0x37 + +#define RC5T583_REG_DC2CTL 0x38 +#define RC5T583_REG_DC2DAC 0x39 +#define RC5T583_REG_DC2LATCTL 0x3A +#define RC5T583_REG_SR2CTL 0x3B + +#define RC5T583_REG_DC3CTL 0x3C +#define RC5T583_REG_DC3DAC 0x3D +#define RC5T583_REG_DC3LATCTL 0x3E +#define RC5T583_REG_SR3CTL 0x3F + + +#define RC5T583_REG_LDOEN1 0x50 +#define RC5T583_REG_LDOEN2 0x51 +#define RC5T583_REG_LDODIS1 0x52 +#define RC5T583_REG_LDODIS2 0x53 + +#define RC5T583_REG_LDO0DAC 0x54 +#define RC5T583_REG_LDO1DAC 0x55 +#define RC5T583_REG_LDO2DAC 0x56 +#define RC5T583_REG_LDO3DAC 0x57 +#define RC5T583_REG_LDO4DAC 0x58 +#define RC5T583_REG_LDO5DAC 0x59 +#define RC5T583_REG_LDO6DAC 0x5A +#define RC5T583_REG_LDO7DAC 0x5B +#define RC5T583_REG_LDO8DAC 0x5C +#define RC5T583_REG_LDO9DAC 0x5D + +#define RC5T583_REG_DC0DAC_DS 0x60 +#define RC5T583_REG_DC1DAC_DS 0x61 +#define RC5T583_REG_DC2DAC_DS 0x62 +#define RC5T583_REG_DC3DAC_DS 0x63 + +#define RC5T583_REG_LDO0DAC_DS 0x64 +#define RC5T583_REG_LDO1DAC_DS 0x65 +#define RC5T583_REG_LDO2DAC_DS 0x66 +#define RC5T583_REG_LDO3DAC_DS 0x67 +#define RC5T583_REG_LDO4DAC_DS 0x68 +#define RC5T583_REG_LDO5DAC_DS 0x69 +#define RC5T583_REG_LDO6DAC_DS 0x6A +#define RC5T583_REG_LDO7DAC_DS 0x6B +#define RC5T583_REG_LDO8DAC_DS 0x6C +#define RC5T583_REG_LDO9DAC_DS 0x6D + +/* GPIO register base address */ +#define RC5T583_GPIO_IOSEL 0xA0 +#define RC5T583_GPIO_PDEN 0xA1 +#define RC5T583_GPIO_IOOUT 0xA2 +#define RC5T583_GPIO_PGSEL 0xA3 +#define RC5T583_GPIO_GPINV 0xA4 +#define RC5T583_GPIO_GPDEB 0xA5 +#define RC5T583_GPIO_GPEDGE1 0xA6 +#define RC5T583_GPIO_GPEDGE2 0xA7 +#define RC5T583_GPIO_EN_INT 0xA8 +#define RC5T583_GPIO_MON_IOIN 0xAB +#define RC5T583_GPIO_GPOFUNC 0xAC + +/* RICOH_RC5T583 IRQ definitions */ +enum { + RC5T583_IRQ_ONKEY, + RC5T583_IRQ_ACOK, + RC5T583_IRQ_LIDOPEN, + RC5T583_IRQ_PREOT, + RC5T583_IRQ_CLKSTP, + RC5T583_IRQ_ONKEY_OFF, + RC5T583_IRQ_WD, + RC5T583_IRQ_EN_PWRREQ1, + RC5T583_IRQ_EN_PWRREQ2, + RC5T583_IRQ_PRE_VINDET, + + RC5T583_IRQ_DC0LIM, + RC5T583_IRQ_DC1LIM, + RC5T583_IRQ_DC2LIM, + RC5T583_IRQ_DC3LIM, + + RC5T583_IRQ_CTC, + RC5T583_IRQ_YALE, + RC5T583_IRQ_DALE, + RC5T583_IRQ_WALE, + + RC5T583_IRQ_AIN1L, + RC5T583_IRQ_AIN2L, + RC5T583_IRQ_AIN3L, + RC5T583_IRQ_VBATL, + RC5T583_IRQ_VIN3L, + RC5T583_IRQ_VIN8L, + RC5T583_IRQ_AIN1H, + RC5T583_IRQ_AIN2H, + RC5T583_IRQ_AIN3H, + RC5T583_IRQ_VBATH, + RC5T583_IRQ_VIN3H, + RC5T583_IRQ_VIN8H, + RC5T583_IRQ_ADCEND, + + RC5T583_IRQ_GPIO0, + RC5T583_IRQ_GPIO1, + RC5T583_IRQ_GPIO2, + RC5T583_IRQ_GPIO3, + RC5T583_IRQ_GPIO4, + RC5T583_IRQ_GPIO5, + RC5T583_IRQ_GPIO6, + RC5T583_IRQ_GPIO7, + + /* Should be last entry */ + RC5T583_MAX_IRQS, +}; + +/* Ricoh583 gpio definitions */ +enum { + RC5T583_GPIO0, + RC5T583_GPIO1, + RC5T583_GPIO2, + RC5T583_GPIO3, + RC5T583_GPIO4, + RC5T583_GPIO5, + RC5T583_GPIO6, + RC5T583_GPIO7, + + /* Should be last entry */ + RC5T583_MAX_GPIO, +}; + +enum { + RC5T583_DS_NONE, + RC5T583_DS_DC0, + RC5T583_DS_DC1, + RC5T583_DS_DC2, + RC5T583_DS_DC3, + RC5T583_DS_LDO0, + RC5T583_DS_LDO1, + RC5T583_DS_LDO2, + RC5T583_DS_LDO3, + RC5T583_DS_LDO4, + RC5T583_DS_LDO5, + RC5T583_DS_LDO6, + RC5T583_DS_LDO7, + RC5T583_DS_LDO8, + RC5T583_DS_LDO9, + RC5T583_DS_PSO0, + RC5T583_DS_PSO1, + RC5T583_DS_PSO2, + RC5T583_DS_PSO3, + RC5T583_DS_PSO4, + RC5T583_DS_PSO5, + RC5T583_DS_PSO6, + RC5T583_DS_PSO7, + + /* Should be last entry */ + RC5T583_DS_MAX, +}; + +/* + * Ricoh pmic RC5T583 supports sleep through two external controls. + * The output of gpios and regulator can be enable/disable through + * this external signals. + */ +enum { + RC5T583_EXT_PWRREQ1_CONTROL = 0x1, + RC5T583_EXT_PWRREQ2_CONTROL = 0x2, +}; + +struct rc5t583 { + struct device *dev; + struct regmap *regmap; + int chip_irq; + int irq_base; + struct mutex irq_lock; + unsigned long group_irq_en[MAX_MAIN_INTERRUPT]; + + /* For main interrupt bits in INTC */ + uint8_t intc_inten_reg; + + /* For group interrupt bits and address */ + uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS]; + + /* For gpio edge */ + uint8_t gpedge_reg[RC5T583_MAX_GPEDGE_REG]; +}; + +/* + * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu. + * The board specific data is provided through this structure. + * @irq_base: Irq base number on which this device registers their interrupts. + * @enable_shutdown: Enable shutdown through the input pin "shutdown". + */ + +struct rc5t583_platform_data { + int irq_base; + bool enable_shutdown; +}; + +int rc5t583_write(struct device *dev, u8 reg, uint8_t val); +int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val); +int rc5t583_set_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask); +int rc5t583_clear_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask); +int rc5t583_update(struct device *dev, unsigned int reg, + unsigned int val, unsigned int mask); +int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id, + int ext_pwr_req, int deepsleep_slot_nr); +int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base); +int rc5t583_irq_exit(struct rc5t583 *rc5t583); + +#endif diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index ca1d7a347600..8516fd1eaabc 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -8,7 +8,9 @@ #ifndef __LINUX_MFD_STMPE_H #define __LINUX_MFD_STMPE_H -#include <linux/device.h> +#include <linux/mutex.h> + +struct device; enum stmpe_block { STMPE_BLOCK_GPIO = 1 << 0, @@ -26,6 +28,7 @@ enum stmpe_partnum { STMPE1601, STMPE2401, STMPE2403, + STMPE_NBR_PARTS }; /* diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h index 16c76e124f9c..3acb3a8e3af5 100644 --- a/include/linux/mfd/tc3589x.h +++ b/include/linux/mfd/tc3589x.h @@ -7,7 +7,7 @@ #ifndef __LINUX_MFD_TC3589x_H #define __LINUX_MFD_TC3589x_H -#include <linux/device.h> +struct device; enum tx3589x_block { TC3589x_BLOCK_GPIO = 1 << 0, diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 0dc98044d8b7..f5171dbf8850 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -1,8 +1,10 @@ #ifndef MFD_TMIO_H #define MFD_TMIO_H +#include <linux/device.h> #include <linux/fb.h> #include <linux/io.h> +#include <linux/jiffies.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> @@ -64,8 +66,8 @@ #define TMIO_MMC_SDIO_IRQ (1 << 2) /* * Some platforms can detect card insertion events with controller powered - * down, in which case they have to call tmio_mmc_cd_wakeup() to power up the - * controller and report the event to the driver. + * down, using a GPIO IRQ, in which case they have to fill in cd_irq, cd_gpio, + * and cd_flags fields of struct tmio_mmc_data. */ #define TMIO_MMC_HAS_COLD_CD (1 << 3) /* @@ -73,6 +75,12 @@ * idle before writing to some registers. */ #define TMIO_MMC_HAS_IDLE_WAIT (1 << 4) +/* + * A GPIO is used for card hotplug detection. We need an extra flag for this, + * because 0 is a valid GPIO number too, and requiring users to specify + * cd_gpio < 0 to disable GPIO hotplug would break backwards compatibility. + */ +#define TMIO_MMC_USE_GPIO_CD (1 << 5) int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); @@ -97,19 +105,23 @@ struct tmio_mmc_data { u32 ocr_mask; /* available voltages */ struct tmio_mmc_dma *dma; struct device *dev; - bool power; + unsigned int cd_gpio; void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); int (*get_cd)(struct platform_device *host); int (*write16_hook)(struct tmio_mmc_host *host, int addr); }; +/* + * This function is deprecated and will be removed soon. Please, convert your + * platform to use drivers/mmc/core/cd-gpio.c + */ +#include <linux/mmc/host.h> static inline void tmio_mmc_cd_wakeup(struct tmio_mmc_data *pdata) { - if (pdata && !pdata->power) { - pdata->power = true; - pm_runtime_get(pdata->dev); - } + if (pdata) + mmc_detect_change(dev_get_drvdata(pdata->dev), + msecs_to_jiffies(100)); } /* diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h new file mode 100644 index 000000000000..38e31c55adbb --- /dev/null +++ b/include/linux/mfd/tps65090.h @@ -0,0 +1,46 @@ +/* + * Core driver interface for TI TPS65090 PMIC family + * + * Copyright (C) 2012 NVIDIA Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + */ + +#ifndef __LINUX_MFD_TPS65090_H +#define __LINUX_MFD_TPS65090_H + +struct tps65090_subdev_info { + int id; + const char *name; + void *platform_data; +}; + +struct tps65090_platform_data { + int irq_base; + int num_subdevs; + struct tps65090_subdev_info *subdevs; +}; + +/* + * NOTE: the functions below are not intended for use outside + * of the TPS65090 sub-device drivers + */ +extern int tps65090_write(struct device *dev, int reg, uint8_t val); +extern int tps65090_read(struct device *dev, int reg, uint8_t *val); +extern int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num); +extern int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num); + +#endif /*__LINUX_MFD_TPS65090_H */ diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h new file mode 100644 index 000000000000..e030ef9a64ee --- /dev/null +++ b/include/linux/mfd/tps65217.h @@ -0,0 +1,283 @@ +/* + * linux/mfd/tps65217.h + * + * Functions to access TPS65217 power management chip. + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_MFD_TPS65217_H +#define __LINUX_MFD_TPS65217_H + +#include <linux/i2c.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +/* I2C ID for TPS65217 part */ +#define TPS65217_I2C_ID 0x24 + +/* All register addresses */ +#define TPS65217_REG_CHIPID 0X00 +#define TPS65217_REG_PPATH 0X01 +#define TPS65217_REG_INT 0X02 +#define TPS65217_REG_CHGCONFIG0 0X03 +#define TPS65217_REG_CHGCONFIG1 0X04 +#define TPS65217_REG_CHGCONFIG2 0X05 +#define TPS65217_REG_CHGCONFIG3 0X06 +#define TPS65217_REG_WLEDCTRL1 0X07 +#define TPS65217_REG_WLEDCTRL2 0X08 +#define TPS65217_REG_MUXCTRL 0X09 +#define TPS65217_REG_STATUS 0X0A +#define TPS65217_REG_PASSWORD 0X0B +#define TPS65217_REG_PGOOD 0X0C +#define TPS65217_REG_DEFPG 0X0D +#define TPS65217_REG_DEFDCDC1 0X0E +#define TPS65217_REG_DEFDCDC2 0X0F +#define TPS65217_REG_DEFDCDC3 0X10 +#define TPS65217_REG_DEFSLEW 0X11 +#define TPS65217_REG_DEFLDO1 0X12 +#define TPS65217_REG_DEFLDO2 0X13 +#define TPS65217_REG_DEFLS1 0X14 +#define TPS65217_REG_DEFLS2 0X15 +#define TPS65217_REG_ENABLE 0X16 +#define TPS65217_REG_DEFUVLO 0X18 +#define TPS65217_REG_SEQ1 0X19 +#define TPS65217_REG_SEQ2 0X1A +#define TPS65217_REG_SEQ3 0X1B +#define TPS65217_REG_SEQ4 0X1C +#define TPS65217_REG_SEQ5 0X1D +#define TPS65217_REG_SEQ6 0X1E + +/* Register field definitions */ +#define TPS65217_CHIPID_CHIP_MASK 0xF0 +#define TPS65217_CHIPID_REV_MASK 0x0F + +#define TPS65217_PPATH_ACSINK_ENABLE BIT(7) +#define TPS65217_PPATH_USBSINK_ENABLE BIT(6) +#define TPS65217_PPATH_AC_PW_ENABLE BIT(5) +#define TPS65217_PPATH_USB_PW_ENABLE BIT(4) +#define TPS65217_PPATH_AC_CURRENT_MASK 0x0C +#define TPS65217_PPATH_USB_CURRENT_MASK 0x03 + +#define TPS65217_INT_PBM BIT(6) +#define TPS65217_INT_ACM BIT(5) +#define TPS65217_INT_USBM BIT(4) +#define TPS65217_INT_PBI BIT(2) +#define TPS65217_INT_ACI BIT(1) +#define TPS65217_INT_USBI BIT(0) + +#define TPS65217_CHGCONFIG0_TREG BIT(7) +#define TPS65217_CHGCONFIG0_DPPM BIT(6) +#define TPS65217_CHGCONFIG0_TSUSP BIT(5) +#define TPS65217_CHGCONFIG0_TERMI BIT(4) +#define TPS65217_CHGCONFIG0_ACTIVE BIT(3) +#define TPS65217_CHGCONFIG0_CHGTOUT BIT(2) +#define TPS65217_CHGCONFIG0_PCHGTOUT BIT(1) +#define TPS65217_CHGCONFIG0_BATTEMP BIT(0) + +#define TPS65217_CHGCONFIG1_TMR_MASK 0xC0 +#define TPS65217_CHGCONFIG1_TMR_ENABLE BIT(5) +#define TPS65217_CHGCONFIG1_NTC_TYPE BIT(4) +#define TPS65217_CHGCONFIG1_RESET BIT(3) +#define TPS65217_CHGCONFIG1_TERM BIT(2) +#define TPS65217_CHGCONFIG1_SUSP BIT(1) +#define TPS65217_CHGCONFIG1_CHG_EN BIT(0) + +#define TPS65217_CHGCONFIG2_DYNTMR BIT(7) +#define TPS65217_CHGCONFIG2_VPREGHG BIT(6) +#define TPS65217_CHGCONFIG2_VOREG_MASK 0x30 + +#define TPS65217_CHGCONFIG3_ICHRG_MASK 0xC0 +#define TPS65217_CHGCONFIG3_DPPMTH_MASK 0x30 +#define TPS65217_CHGCONFIG2_PCHRGT BIT(3) +#define TPS65217_CHGCONFIG2_TERMIF 0x06 +#define TPS65217_CHGCONFIG2_TRANGE BIT(0) + +#define TPS65217_WLEDCTRL1_ISINK_ENABLE BIT(3) +#define TPS65217_WLEDCTRL1_ISEL BIT(2) +#define TPS65217_WLEDCTRL1_FDIM_MASK 0x03 + +#define TPS65217_WLEDCTRL2_DUTY_MASK 0x7F + +#define TPS65217_MUXCTRL_MUX_MASK 0x07 + +#define TPS65217_STATUS_OFF BIT(7) +#define TPS65217_STATUS_ACPWR BIT(3) +#define TPS65217_STATUS_USBPWR BIT(2) +#define TPS65217_STATUS_PB BIT(0) + +#define TPS65217_PASSWORD_REGS_UNLOCK 0x7D + +#define TPS65217_PGOOD_LDO3_PG BIT(6) +#define TPS65217_PGOOD_LDO4_PG BIT(5) +#define TPS65217_PGOOD_DC1_PG BIT(4) +#define TPS65217_PGOOD_DC2_PG BIT(3) +#define TPS65217_PGOOD_DC3_PG BIT(2) +#define TPS65217_PGOOD_LDO1_PG BIT(1) +#define TPS65217_PGOOD_LDO2_PG BIT(0) + +#define TPS65217_DEFPG_LDO1PGM BIT(3) +#define TPS65217_DEFPG_LDO2PGM BIT(2) +#define TPS65217_DEFPG_PGDLY_MASK 0x03 + +#define TPS65217_DEFDCDCX_XADJX BIT(7) +#define TPS65217_DEFDCDCX_DCDC_MASK 0x3F + +#define TPS65217_DEFSLEW_GO BIT(7) +#define TPS65217_DEFSLEW_GODSBL BIT(6) +#define TPS65217_DEFSLEW_PFM_EN1 BIT(5) +#define TPS65217_DEFSLEW_PFM_EN2 BIT(4) +#define TPS65217_DEFSLEW_PFM_EN3 BIT(3) +#define TPS65217_DEFSLEW_SLEW_MASK 0x07 + +#define TPS65217_DEFLDO1_LDO1_MASK 0x0F + +#define TPS65217_DEFLDO2_TRACK BIT(6) +#define TPS65217_DEFLDO2_LDO2_MASK 0x3F + +#define TPS65217_DEFLDO3_LDO3_EN BIT(5) +#define TPS65217_DEFLDO3_LDO3_MASK 0x1F + +#define TPS65217_DEFLDO4_LDO4_EN BIT(5) +#define TPS65217_DEFLDO4_LDO4_MASK 0x1F + +#define TPS65217_ENABLE_LS1_EN BIT(6) +#define TPS65217_ENABLE_LS2_EN BIT(5) +#define TPS65217_ENABLE_DC1_EN BIT(4) +#define TPS65217_ENABLE_DC2_EN BIT(3) +#define TPS65217_ENABLE_DC3_EN BIT(2) +#define TPS65217_ENABLE_LDO1_EN BIT(1) +#define TPS65217_ENABLE_LDO2_EN BIT(0) + +#define TPS65217_DEFUVLO_UVLOHYS BIT(2) +#define TPS65217_DEFUVLO_UVLO_MASK 0x03 + +#define TPS65217_SEQ1_DC1_SEQ_MASK 0xF0 +#define TPS65217_SEQ1_DC2_SEQ_MASK 0x0F + +#define TPS65217_SEQ2_DC3_SEQ_MASK 0xF0 +#define TPS65217_SEQ2_LDO1_SEQ_MASK 0x0F + +#define TPS65217_SEQ3_LDO2_SEQ_MASK 0xF0 +#define TPS65217_SEQ3_LDO3_SEQ_MASK 0x0F + +#define TPS65217_SEQ4_LDO4_SEQ_MASK 0xF0 + +#define TPS65217_SEQ5_DLY1_MASK 0xC0 +#define TPS65217_SEQ5_DLY2_MASK 0x30 +#define TPS65217_SEQ5_DLY3_MASK 0x0C +#define TPS65217_SEQ5_DLY4_MASK 0x03 + +#define TPS65217_SEQ6_DLY5_MASK 0xC0 +#define TPS65217_SEQ6_DLY6_MASK 0x30 +#define TPS65217_SEQ6_SEQUP BIT(2) +#define TPS65217_SEQ6_SEQDWN BIT(1) +#define TPS65217_SEQ6_INSTDWN BIT(0) + +#define TPS65217_MAX_REGISTER 0x1E +#define TPS65217_PROTECT_NONE 0 +#define TPS65217_PROTECT_L1 1 +#define TPS65217_PROTECT_L2 2 + + +enum tps65217_regulator_id { + /* DCDC's */ + TPS65217_DCDC_1, + TPS65217_DCDC_2, + TPS65217_DCDC_3, + /* LDOs */ + TPS65217_LDO_1, + TPS65217_LDO_2, + TPS65217_LDO_3, + TPS65217_LDO_4, +}; + +#define TPS65217_MAX_REG_ID TPS65217_LDO_4 + +/* Number of step-down converters available */ +#define TPS65217_NUM_DCDC 3 +/* Number of LDO voltage regulators available */ +#define TPS65217_NUM_LDO 4 +/* Number of total regulators available */ +#define TPS65217_NUM_REGULATOR (TPS65217_NUM_DCDC + TPS65217_NUM_LDO) + +/** + * struct tps65217_board - packages regulator init data + * @tps65217_regulator_data: regulator initialization values + * + * Board data may be used to initialize regulator. + */ +struct tps65217_board { + struct regulator_init_data *tps65217_init_data; +}; + +/** + * struct tps_info - packages regulator constraints + * @name: Voltage regulator name + * @min_uV: minimum micro volts + * @max_uV: minimum micro volts + * @vsel_to_uv: Function pointer to get voltage from selector + * @uv_to_vsel: Function pointer to get selector from voltage + * @table: Table for non-uniform voltage step-size + * @table_len: Length of the voltage table + * @enable_mask: Regulator enable mask bits + * @set_vout_reg: Regulator output voltage set register + * @set_vout_mask: Regulator output voltage set mask + * + * This data is used to check the regualtor voltage limits while setting. + */ +struct tps_info { + const char *name; + int min_uV; + int max_uV; + int (*vsel_to_uv)(unsigned int vsel); + int (*uv_to_vsel)(int uV, unsigned int *vsel); + const int *table; + unsigned int table_len; + unsigned int enable_mask; + unsigned int set_vout_reg; + unsigned int set_vout_mask; +}; + +/** + * struct tps65217 - tps65217 sub-driver chip access routines + * + * Device data may be used to access the TPS65217 chip + */ + +struct tps65217 { + struct device *dev; + struct tps65217_board *pdata; + struct regulator_desc desc[TPS65217_NUM_REGULATOR]; + struct regulator_dev *rdev[TPS65217_NUM_REGULATOR]; + struct tps_info *info[TPS65217_NUM_REGULATOR]; + struct regmap *regmap; + + /* Client devices */ + struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR]; +}; + +static inline struct tps65217 *dev_to_tps65217(struct device *dev) +{ + return dev_get_drvdata(dev); +} + +int tps65217_reg_read(struct tps65217 *tps, unsigned int reg, + unsigned int *val); +int tps65217_reg_write(struct tps65217 *tps, unsigned int reg, + unsigned int val, unsigned int level); +int tps65217_set_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level); +int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int level); + +#endif /* __LINUX_MFD_TPS65217_H */ diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 76700b5eee92..1c6c2860d1a6 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -17,6 +17,8 @@ #ifndef __LINUX_MFD_TPS65910_H #define __LINUX_MFD_TPS65910_H +#include <linux/gpio.h> + /* TPS chip id list */ #define TPS65910 0 #define TPS65911 1 @@ -657,6 +659,8 @@ /*Register GPIO (0x80) register.RegisterDescription */ +#define GPIO_SLEEP_MASK 0x80 +#define GPIO_SLEEP_SHIFT 7 #define GPIO_DEB_MASK 0x10 #define GPIO_DEB_SHIFT 4 #define GPIO_PUEN_MASK 0x08 @@ -740,6 +744,11 @@ #define TPS65910_GPIO_STS BIT(1) #define TPS65910_GPIO_SET BIT(0) +/* Max number of TPS65910/11 GPIOs */ +#define TPS65910_NUM_GPIO 6 +#define TPS65911_NUM_GPIO 9 +#define TPS6591X_MAX_NUM_GPIO 9 + /* Regulator Index Definitions */ #define TPS65910_REG_VRTC 0 #define TPS65910_REG_VIO 1 @@ -785,6 +794,7 @@ struct tps65910_board { int irq_base; int vmbch_threshold; int vmbch2_threshold; + bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO]; unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS]; struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS]; }; @@ -796,6 +806,7 @@ struct tps65910_board { struct tps65910 { struct device *dev; struct i2c_client *i2c_client; + struct regmap *regmap; struct mutex io_mutex; unsigned int id; int (*read)(struct tps65910 *tps65910, u8 reg, int size, void *dest); diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h index 4321f044d1e4..28af41756360 100644 --- a/include/linux/mfd/ucb1x00.h +++ b/include/linux/mfd/ucb1x00.h @@ -12,7 +12,7 @@ #include <linux/mfd/mcp.h> #include <linux/gpio.h> -#include <linux/semaphore.h> +#include <linux/mutex.h> #define UCB_IO_DATA 0x00 #define UCB_IO_DIR 0x01 @@ -104,17 +104,27 @@ #define UCB_MODE_DYN_VFLAG_ENA (1 << 12) #define UCB_MODE_AUD_OFF_CAN (1 << 13) +enum ucb1x00_reset { + UCB_RST_PROBE, + UCB_RST_RESUME, + UCB_RST_SUSPEND, + UCB_RST_REMOVE, + UCB_RST_PROBE_FAIL, +}; -struct ucb1x00_irq { - void *devid; - void (*fn)(int, void *); +struct ucb1x00_plat_data { + void (*reset)(enum ucb1x00_reset); + unsigned irq_base; + int gpio_base; + unsigned can_wakeup; }; struct ucb1x00 { - spinlock_t lock; + raw_spinlock_t irq_lock; struct mcp *mcp; unsigned int irq; - struct semaphore adc_sem; + int irq_base; + struct mutex adc_mutex; spinlock_t io_lock; u16 id; u16 io_dir; @@ -122,7 +132,8 @@ struct ucb1x00 { u16 adc_cr; u16 irq_fal_enbl; u16 irq_ris_enbl; - struct ucb1x00_irq irq_handler[16]; + u16 irq_mask; + u16 irq_wake; struct device dev; struct list_head node; struct list_head devs; @@ -144,7 +155,7 @@ struct ucb1x00_driver { struct list_head devs; int (*add)(struct ucb1x00_dev *dev); void (*remove)(struct ucb1x00_dev *dev); - int (*suspend)(struct ucb1x00_dev *dev, pm_message_t state); + int (*suspend)(struct ucb1x00_dev *dev); int (*resume)(struct ucb1x00_dev *dev); }; @@ -245,15 +256,4 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync); void ucb1x00_adc_enable(struct ucb1x00 *ucb); void ucb1x00_adc_disable(struct ucb1x00 *ucb); -/* - * Which edges of the IRQ do you want to control today? - */ -#define UCB_RISING (1 << 0) -#define UCB_FALLING (1 << 1) - -int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid); -void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); -void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); -int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid); - #endif diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index 3fb1f407d5e6..893267bb6229 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -22,7 +22,6 @@ struct wm8994_ldo_pdata { /** GPIOs to enable regulator, 0 or less if not available */ int enable; - const char *supply; const struct regulator_init_data *init_data; }; @@ -185,6 +184,9 @@ struct wm8994_pdata { unsigned int jd_scthr:2; unsigned int jd_thr:2; + /* Configure WM1811 jack detection for use with external capacitor */ + unsigned int jd_ext_cap:1; + /* WM8958 microphone bias configuration */ int micbias[2]; diff --git a/include/linux/mlx4/driver.h b/include/linux/mlx4/driver.h index e1eebf78caba..5f1298b1b5ef 100644 --- a/include/linux/mlx4/driver.h +++ b/include/linux/mlx4/driver.h @@ -33,7 +33,6 @@ #ifndef MLX4_DRIVER_H #define MLX4_DRIVER_H -#include <linux/device.h> #include <linux/mlx4/device.h> struct mlx4_dev; diff --git a/include/linux/mm.h b/include/linux/mm.h index 7330742e7973..d8738a464b94 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -6,6 +6,7 @@ #ifdef __KERNEL__ #include <linux/gfp.h> +#include <linux/bug.h> #include <linux/list.h> #include <linux/mmzone.h> #include <linux/rbtree.h> @@ -111,7 +112,7 @@ extern unsigned int kobjsize(const void *objp); #define VM_HUGEPAGE 0x01000000 /* MADV_HUGEPAGE marked this vma */ #endif #define VM_INSERTPAGE 0x02000000 /* The vma has had "vm_insert_page()" done on it */ -#define VM_ALWAYSDUMP 0x04000000 /* Always include in core dumps */ +#define VM_NODUMP 0x04000000 /* Do not include in the core dump */ #define VM_CAN_NONLINEAR 0x08000000 /* Has ->fault & does nonlinear pages */ #define VM_MIXEDMAP 0x10000000 /* Can contain "struct page" and pure PFN pages */ @@ -953,7 +954,7 @@ extern void truncate_pagecache(struct inode *inode, loff_t old, loff_t new); extern void truncate_setsize(struct inode *inode, loff_t newsize); extern int vmtruncate(struct inode *inode, loff_t offset); extern int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end); - +void truncate_pagecache_range(struct inode *inode, loff_t offset, loff_t end); int truncate_inode_page(struct address_space *mapping, struct page *page); int generic_error_remove_page(struct address_space *mapping, struct page *page); @@ -1257,6 +1258,8 @@ static inline void pgtable_page_dtor(struct page *page) extern void free_area_init(unsigned long * zones_size); extern void free_area_init_node(int nid, unsigned long * zones_size, unsigned long zone_start_pfn, unsigned long *zholes_size); +extern void free_initmem(void); + #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP /* * With CONFIG_HAVE_MEMBLOCK_NODE_MAP set, an architecture may initialise its diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 19a41d1737af..01beae78f079 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -10,6 +10,7 @@ #ifndef LINUX_MMC_CARD_H #define LINUX_MMC_CARD_H +#include <linux/device.h> #include <linux/mmc/core.h> #include <linux/mod_devicetable.h> @@ -71,6 +72,8 @@ struct mmc_ext_csd { bool hpi_en; /* HPI enablebit */ bool hpi; /* HPI support bit */ unsigned int hpi_cmd; /* cmd used as HPI */ + unsigned int data_sector_size; /* 512 bytes or 4KB */ + unsigned int data_tag_unit_size; /* DATA TAG UNIT size */ unsigned int boot_ro_lock; /* ro lock support */ bool boot_ro_lockable; u8 raw_partition_support; /* 160 */ diff --git a/include/linux/mmc/cd-gpio.h b/include/linux/mmc/cd-gpio.h index a8e469783318..cefaba038ccb 100644 --- a/include/linux/mmc/cd-gpio.h +++ b/include/linux/mmc/cd-gpio.h @@ -12,8 +12,7 @@ #define MMC_CD_GPIO_H struct mmc_host; -int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio, - unsigned int irq, unsigned long flags); +int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio); void mmc_cd_gpio_free(struct mmc_host *host); #endif diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 87a976cc5654..1b431c728b9a 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -9,7 +9,7 @@ #define LINUX_MMC_CORE_H #include <linux/interrupt.h> -#include <linux/device.h> +#include <linux/completion.h> struct request; struct mmc_data; @@ -175,7 +175,6 @@ extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int); extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort); extern void mmc_release_host(struct mmc_host *host); -extern void mmc_do_release_host(struct mmc_host *host); extern int mmc_try_claim_host(struct mmc_host *host); extern int mmc_flush_cache(struct mmc_card *); diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index aae5d1f1bb39..8f66e28f5a0f 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -76,7 +76,7 @@ struct mmc_data; * @num_slots: Number of slots available. * @verid: Denote Version ID. * @data_offset: Set the offset of DATA register according to VERID. - * @pdev: Platform device associated with the MMC controller. + * @dev: Device associated with the MMC controller. * @pdata: Platform data associated with the MMC controller. * @slot: Slots sharing this MMC controller. * @fifo_depth: depth of FIFO. @@ -87,6 +87,8 @@ struct mmc_data; * @push_data: Pointer to FIFO push function. * @pull_data: Pointer to FIFO pull function. * @quirks: Set of quirks that apply to specific versions of the IP. + * @irq_flags: The flags to be passed to request_irq. + * @irq: The irq value to be passed to request_irq. * * Locking * ======= @@ -153,7 +155,7 @@ struct dw_mci { u32 fifoth_val; u16 verid; u16 data_offset; - struct platform_device *pdev; + struct device dev; struct dw_mci_board *pdata; struct dw_mci_slot *slot[MAX_MCI_SLOTS]; @@ -174,6 +176,8 @@ struct dw_mci { u32 quirks; struct regulator *vmmc; /* Power regulator */ + unsigned long irq_flags; /* IRQ flags */ + unsigned int irq; }; /* DMA ops for Internal/External DMAC interface */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index ee2b0363c040..cbde4b7e675e 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -12,6 +12,7 @@ #include <linux/leds.h> #include <linux/sched.h> +#include <linux/device.h> #include <linux/fault-inject.h> #include <linux/mmc/core.h> @@ -80,34 +81,11 @@ struct mmc_ios { struct mmc_host_ops { /* - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. 'enable' is called - * when the host is claimed and 'disable' is called (or scheduled with - * a delay) when the host is released. The 'disable' is scheduled if - * the disable delay set by 'mmc_set_disable_delay()' is non-zero, - * otherwise 'disable' is called immediately. 'disable' may be - * scheduled repeatedly, to permit ever greater power saving at the - * expense of ever greater latency to re-enable. Rescheduling is - * determined by the return value of the 'disable' method. A positive - * value gives the delay in milliseconds. - * - * In the case where a host function (like set_ios) may be called - * with or without the host claimed, enabling and disabling can be - * done directly and will nest correctly. Call 'mmc_host_enable()' and - * 'mmc_host_lazy_disable()' for this purpose, but note that these - * functions must be paired. - * - * Alternatively, 'mmc_host_enable()' may be paired with - * 'mmc_host_disable()' which calls 'disable' immediately. In this - * case the 'disable' method will be called with 'lazy' set to 0. - * This is mainly useful for error paths. - * - * Because lazy disable may be called from a work queue, the 'disable' - * method must claim the host when 'lazy' != 0, which will work - * correctly because recursion is detected and handled. + * 'enable' is called when the host is claimed and 'disable' is called + * when the host is released. 'enable' and 'disable' are deprecated. */ int (*enable)(struct mmc_host *host); - int (*disable)(struct mmc_host *host, int lazy); + int (*disable)(struct mmc_host *host); /* * It is optional for the host to implement pre_req and post_req in * order to support double buffering of requests (prepare one @@ -218,7 +196,7 @@ struct mmc_host { #define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */ #define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */ #define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */ -#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */ + #define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ #define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */ #define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */ @@ -258,6 +236,8 @@ struct mmc_host { #define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ MMC_CAP2_HS200_1_2V_SDR) #define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ +#define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* On I/O err check card removal */ +#define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */ mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; @@ -300,13 +280,7 @@ struct mmc_host { unsigned int removed:1; /* host is being removed */ #endif - /* Only used with MMC_CAP_DISABLE */ - int enabled; /* host is enabled */ int rescan_disable; /* disable card detection */ - int nesting_cnt; /* "enable" nesting count */ - int en_dis_recurs; /* detect recursion */ - unsigned int disable_delay; /* disable delay in msecs */ - struct delayed_work disable; /* disabling work */ struct mmc_card *card; /* device attached to this host */ @@ -406,17 +380,8 @@ int mmc_card_awake(struct mmc_host *host); int mmc_card_sleep(struct mmc_host *host); int mmc_card_can_sleep(struct mmc_host *host); -int mmc_host_enable(struct mmc_host *host); -int mmc_host_disable(struct mmc_host *host); -int mmc_host_lazy_disable(struct mmc_host *host); int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *); -static inline void mmc_set_disable_delay(struct mmc_host *host, - unsigned int disable_delay) -{ - host->disable_delay = disable_delay; -} - /* Module parameter */ extern bool mmc_assume_removable; diff --git a/include/linux/mmc/ioctl.h b/include/linux/mmc/ioctl.h index 8fa5bc5f8059..1f5e68923929 100644 --- a/include/linux/mmc/ioctl.h +++ b/include/linux/mmc/ioctl.h @@ -1,5 +1,8 @@ #ifndef LINUX_MMC_IOCTL_H #define LINUX_MMC_IOCTL_H + +#include <linux/types.h> + struct mmc_ioc_cmd { /* Implies direction of data. true = write, false = read */ int write_flag; diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index fb9f6e116e1c..b822a2cb6008 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -274,6 +274,7 @@ struct _mmc_csd { #define EXT_CSD_FLUSH_CACHE 32 /* W */ #define EXT_CSD_CACHE_CTRL 33 /* R/W */ #define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ +#define EXT_CSD_DATA_SECTOR_SIZE 61 /* R */ #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ @@ -315,6 +316,8 @@ struct _mmc_csd { #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ +#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ +#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ #define EXT_CSD_HPI_FEATURES 503 /* RO */ /* diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index c750f85177d9..e9051e1cb1ce 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -90,6 +90,8 @@ struct sdhci_host { unsigned int quirks2; /* More deviations from spec. */ +#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) + int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 04ff452bf5c3..05f0e3db1c12 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -77,18 +77,15 @@ struct sh_mmcif_plat_data { /* CE_CLK_CTRL */ #define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ -#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) -#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) -#define CLKDIV_4 (1<<16) /* mmc clock frequency. - * n: bus clock/(2^(n+1)) */ -#define CLKDIV_256 (7<<16) /* mmc clock frequency. (see above) */ -#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */ -#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \ - (1 << 9) | (1 << 8)) /* resp busy timeout */ -#define SRWDTO_29 ((1 << 7) | (1 << 6) | \ - (1 << 5) | (1 << 4)) /* read/write timeout */ -#define SCCSTO_29 ((1 << 3) | (1 << 2) | \ - (1 << 1) | (1 << 0)) /* ccs timeout */ +#define CLK_CLEAR (0xf << 16) +#define CLK_SUP_PCLK (0xf << 16) +#define CLKDIV_4 (1 << 16) /* mmc clock frequency. + * n: bus clock/(2^(n+1)) */ +#define CLKDIV_256 (7 << 16) /* mmc clock frequency. (see above) */ +#define SRSPTO_256 (2 << 12) /* resp timeout */ +#define SRBSYTO_29 (0xf << 8) /* resp busy timeout */ +#define SRWDTO_29 (0xf << 4) /* read/write timeout */ +#define SCCSTO_29 (0xf << 0) /* ccs timeout */ /* CE_VERSION */ #define SOFT_RST_ON (1 << 31) diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h index 71b805451bd8..e94e620aeddc 100644 --- a/include/linux/mmc/sh_mobile_sdhi.h +++ b/include/linux/mmc/sh_mobile_sdhi.h @@ -10,15 +10,29 @@ struct tmio_mmc_data; #define SH_MOBILE_SDHI_IRQ_SDCARD "sdcard" #define SH_MOBILE_SDHI_IRQ_SDIO "sdio" +/** + * struct sh_mobile_sdhi_ops - SDHI driver callbacks + * @cd_wakeup: trigger a card-detection run + */ +struct sh_mobile_sdhi_ops { + void (*cd_wakeup)(const struct platform_device *pdev); +}; + struct sh_mobile_sdhi_info { int dma_slave_tx; int dma_slave_rx; unsigned long tmio_flags; unsigned long tmio_caps; u32 tmio_ocr_mask; /* available MMC voltages */ + unsigned int cd_gpio; struct tmio_mmc_data *pdata; void (*set_pwr)(struct platform_device *pdev, int state); int (*get_cd)(struct platform_device *pdev); + + /* callbacks for board specific setup code */ + int (*init)(struct platform_device *pdev, + const struct sh_mobile_sdhi_ops *ops); + void (*cleanup)(struct platform_device *pdev); }; #endif /* LINUX_MMC_SH_MOBILE_SDHI_H */ diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index fb69ad191ad7..501da4cb8a6d 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -414,6 +414,15 @@ struct hv_vmbus_device_id { __attribute__((aligned(sizeof(kernel_ulong_t)))); }; +/* rpmsg */ + +#define RPMSG_NAME_SIZE 32 +#define RPMSG_DEVICE_MODALIAS_FMT "rpmsg:%s" + +struct rpmsg_device_id { + char name[RPMSG_NAME_SIZE]; +}; + /* i2c */ #define I2C_NAME_SIZE 20 diff --git a/include/linux/module.h b/include/linux/module.h index 4598bf03e98b..fbcafe2ee13e 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -21,8 +21,6 @@ #include <linux/percpu.h> #include <asm/module.h> -#include <trace/events/module.h> - /* Not Yet Implemented */ #define MODULE_SUPPORTED_DEVICE(name) @@ -452,33 +450,11 @@ void symbol_put_addr(void *addr); /* Sometimes we know we already have a refcount, and it's easier not to handle the error case (which only happens with rmmod --wait). */ -static inline void __module_get(struct module *module) -{ - if (module) { - preempt_disable(); - __this_cpu_inc(module->refptr->incs); - trace_module_get(module, _THIS_IP_); - preempt_enable(); - } -} - -static inline int try_module_get(struct module *module) -{ - int ret = 1; - - if (module) { - preempt_disable(); +extern void __module_get(struct module *module); - if (likely(module_is_live(module))) { - __this_cpu_inc(module->refptr->incs); - trace_module_get(module, _THIS_IP_); - } else - ret = 0; - - preempt_enable(); - } - return ret; -} +/* This is the Right Way to get a module: if it fails, it's being removed, + * so pretend it's not there. */ +extern bool try_module_get(struct module *module); extern void module_put(struct module *module); diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index c47f4d60db0b..ea36486378d8 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -47,14 +47,11 @@ struct kernel_param_ops { void (*free)(void *arg); }; -/* Flag bits for kernel_param.flags */ -#define KPARAM_ISBOOL 2 - struct kernel_param { const char *name; const struct kernel_param_ops *ops; u16 perm; - u16 flags; + s16 level; union { void *arg; const struct kparam_string *str; @@ -131,8 +128,40 @@ struct kparam_array * The ops can have NULL set or get functions. */ #define module_param_cb(name, ops, arg, perm) \ - __module_param_call(MODULE_PARAM_PREFIX, \ - name, ops, arg, __same_type((arg), bool *), perm) + __module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, 0) + +/** + * <level>_param_cb - general callback for a module/cmdline parameter + * to be evaluated before certain initcall level + * @name: a valid C identifier which is the parameter name. + * @ops: the set & get operations for this parameter. + * @perm: visibility in sysfs. + * + * The ops can have NULL set or get functions. + */ +#define __level_param_cb(name, ops, arg, perm, level) \ + __module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, level) + +#define core_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 1) + +#define postcore_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 2) + +#define arch_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 3) + +#define subsys_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 4) + +#define fs_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 5) + +#define device_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 6) + +#define late_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 7) /* On alpha, ia64 and ppc64 relocations to global data cannot go into read-only sections (which is part of respective UNIX ABI on these @@ -146,7 +175,7 @@ struct kparam_array /* This is the fundamental function for registering boot/module parameters. */ -#define __module_param_call(prefix, name, ops, arg, isbool, perm) \ +#define __module_param_call(prefix, name, ops, arg, perm, level) \ /* Default value instead of permissions? */ \ static int __param_perm_check_##name __attribute__((unused)) = \ BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2)) \ @@ -155,8 +184,7 @@ struct kparam_array static struct kernel_param __moduleparam_const __param_##name \ __used \ __attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \ - = { __param_str_##name, ops, perm, isbool ? KPARAM_ISBOOL : 0, \ - { arg } } + = { __param_str_##name, ops, perm, level, { arg } } /* Obsolete - use module_param_cb() */ #define module_param_call(name, set, get, arg, perm) \ @@ -164,8 +192,7 @@ struct kparam_array { (void *)set, (void *)get }; \ __module_param_call(MODULE_PARAM_PREFIX, \ name, &__param_ops_##name, arg, \ - __same_type(arg, bool *), \ - (perm) + sizeof(__check_old_set_param(set))*0) + (perm) + sizeof(__check_old_set_param(set))*0, 0) /* We don't get oldget: it's often a new-style param_get_uint, etc. */ static inline int @@ -245,8 +272,7 @@ static inline void __kernel_param_unlock(void) */ #define core_param(name, var, type, perm) \ param_check_##type(name, &(var)); \ - __module_param_call("", name, ¶m_ops_##type, \ - &var, __same_type(var, bool), perm) + __module_param_call("", name, ¶m_ops_##type, &var, perm, 0) #endif /* !MODULE */ /** @@ -264,7 +290,7 @@ static inline void __kernel_param_unlock(void) = { len, string }; \ __module_param_call(MODULE_PARAM_PREFIX, name, \ ¶m_ops_string, \ - .str = &__param_string_##name, 0, perm); \ + .str = &__param_string_##name, perm, 0); \ __MODULE_PARM_TYPE(name, "string") /** @@ -292,6 +318,8 @@ extern int parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, + s16 level_min, + s16 level_max, int (*unknown)(char *param, char *val)); /* Called by module remove. */ @@ -403,7 +431,7 @@ extern int param_set_bint(const char *val, const struct kernel_param *kp); __module_param_call(MODULE_PARAM_PREFIX, name, \ ¶m_array_ops, \ .arr = &__param_arr_##name, \ - __same_type(array[0], bool), perm); \ + perm, 0); \ __MODULE_PARM_TYPE(name, "array of " #type) extern struct kernel_param_ops param_array_ops; diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index d5d2ec6494bb..37ef6b194089 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/types.h> +#include <linux/bug.h> #include <linux/interrupt.h> #include <linux/mtd/flashchip.h> #include <linux/mtd/map.h> diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index 94e924e2ecd5..3595a0236b0f 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -29,8 +29,8 @@ #include <linux/kernel.h> #include <asm/unaligned.h> -#include <asm/system.h> #include <asm/io.h> +#include <asm/barrier.h> #ifdef CONFIG_MTD_MAP_BANK_WIDTH_1 #define map_bankwidth(map) 1 diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 8debe299676d..1f77540bdc95 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -33,12 +33,12 @@ #ifdef __KERNEL__ #include <linux/pm_qos.h> #include <linux/timer.h> +#include <linux/bug.h> #include <linux/delay.h> #include <linux/atomic.h> #include <asm/cache.h> #include <asm/byteorder.h> -#include <linux/device.h> #include <linux/percpu.h> #include <linux/rculist.h> #include <linux/dmaengine.h> @@ -56,6 +56,7 @@ #include <linux/netdev_features.h> struct netpoll_info; +struct device; struct phy_device; /* 802.11 specific */ struct wireless_dev; diff --git a/include/linux/nfs.h b/include/linux/nfs.h index 8c6ee44914cb..6d1fb63f5922 100644 --- a/include/linux/nfs.h +++ b/include/linux/nfs.h @@ -29,7 +29,7 @@ #define NFS_MNT_VERSION 1 #define NFS_MNT3_VERSION 3 -#define NFS_PIPE_DIRNAME "/nfs" +#define NFS_PIPE_DIRNAME "nfs" /* * NFS stats. The good thing with these values is that NFSv3 errors are diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index 32345c2805c0..0987146b0637 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -183,15 +183,12 @@ struct nfs4_acl { typedef struct { char data[NFS4_VERIFIER_SIZE]; } nfs4_verifier; -struct nfs41_stateid { +struct nfs_stateid4 { __be32 seqid; char other[NFS4_STATEID_OTHER_SIZE]; } __attribute__ ((packed)); -typedef union { - char data[NFS4_STATEID_SIZE]; - struct nfs41_stateid stateid; -} nfs4_stateid; +typedef struct nfs_stateid4 nfs4_stateid; enum nfs_opnum4 { OP_ACCESS = 3, @@ -441,7 +438,20 @@ enum limit_by4 { enum open_delegation_type4 { NFS4_OPEN_DELEGATE_NONE = 0, NFS4_OPEN_DELEGATE_READ = 1, - NFS4_OPEN_DELEGATE_WRITE = 2 + NFS4_OPEN_DELEGATE_WRITE = 2, + NFS4_OPEN_DELEGATE_NONE_EXT = 3, /* 4.1 */ +}; + +enum why_no_delegation4 { /* new to v4.1 */ + WND4_NOT_WANTED = 0, + WND4_CONTENTION = 1, + WND4_RESOURCE = 2, + WND4_NOT_SUPP_FTYPE = 3, + WND4_WRITE_DELEG_NOT_SUPP_FTYPE = 4, + WND4_NOT_SUPP_UPGRADE = 5, + WND4_NOT_SUPP_DOWNGRADE = 6, + WND4_CANCELLED = 7, + WND4_IS_DIR = 8, }; enum lock_type4 { diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 8c29950d2fa5..52a1bdb4ee2b 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -38,6 +38,13 @@ #ifdef __KERNEL__ +/* + * Enable dprintk() debugging support for nfs client. + */ +#ifdef CONFIG_NFS_DEBUG +# define NFS_DEBUG +#endif + #include <linux/in.h> #include <linux/mm.h> #include <linux/pagemap.h> @@ -171,13 +178,9 @@ struct nfs_inode { */ __be32 cookieverf[2]; - /* - * This is the list of dirty unwritten pages. - */ - struct radix_tree_root nfs_page_tree; - unsigned long npages; unsigned long ncommit; + struct list_head commit_list; /* Open contexts for shared mmap writes */ struct list_head open_files; @@ -395,6 +398,29 @@ static inline void nfs_free_fhandle(const struct nfs_fh *fh) kfree(fh); } +#ifdef NFS_DEBUG +extern u32 _nfs_display_fhandle_hash(const struct nfs_fh *fh); +static inline u32 nfs_display_fhandle_hash(const struct nfs_fh *fh) +{ + return _nfs_display_fhandle_hash(fh); +} +extern void _nfs_display_fhandle(const struct nfs_fh *fh, const char *caption); +#define nfs_display_fhandle(fh, caption) \ + do { \ + if (unlikely(nfs_debug & NFSDBG_FACILITY)) \ + _nfs_display_fhandle(fh, caption); \ + } while (0) +#else +static inline u32 nfs_display_fhandle_hash(const struct nfs_fh *fh) +{ + return 0; +} +static inline void nfs_display_fhandle(const struct nfs_fh *fh, + const char *caption) +{ +} +#endif + /* * linux/fs/nfs/nfsroot.c */ @@ -632,19 +658,13 @@ nfs_fileid_to_ino_t(u64 fileid) #ifdef __KERNEL__ -/* - * Enable debugging support for nfs client. - * Requires RPC_DEBUG. - */ -#ifdef RPC_DEBUG -# define NFS_DEBUG -#endif - # undef ifdebug # ifdef NFS_DEBUG # define ifdebug(fac) if (unlikely(nfs_debug & NFSDBG_##fac)) +# define NFS_IFDEBUG(x) x # else # define ifdebug(fac) if (0) +# define NFS_IFDEBUG(x) # endif #endif /* __KERNEL */ diff --git a/include/linux/nfs_fs_i.h b/include/linux/nfs_fs_i.h index 861730275ba0..a5c50d97341e 100644 --- a/include/linux/nfs_fs_i.h +++ b/include/linux/nfs_fs_i.h @@ -1,10 +1,6 @@ #ifndef _NFS_FS_I #define _NFS_FS_I -#include <asm/types.h> -#include <linux/list.h> -#include <linux/nfs.h> - struct nlm_lockowner; /* diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index ba4d7656ecfd..7073fc74481c 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -3,6 +3,7 @@ #include <linux/list.h> #include <linux/backing-dev.h> +#include <linux/idr.h> #include <linux/wait.h> #include <linux/nfs_xdr.h> #include <linux/sunrpc/xprt.h> @@ -17,6 +18,7 @@ struct nfs4_sequence_res; struct nfs_server; struct nfs4_minor_version_ops; struct server_scope; +struct nfs41_impl_id; /* * The nfs_client identifies our client state to the server. @@ -85,6 +87,8 @@ struct nfs_client { #endif struct server_scope *server_scope; /* from exchange_id */ + struct nfs41_impl_id *impl_id; /* from exchange_id */ + struct net *net; }; /* @@ -144,15 +148,18 @@ struct nfs_server { u32 acl_bitmask; /* V4 bitmask representing the ACEs that are supported on this filesystem */ + u32 fh_expire_type; /* V4 bitmask representing file + handle volatility type for + this filesystem */ struct pnfs_layoutdriver_type *pnfs_curr_ld; /* Active layout driver */ struct rpc_wait_queue roc_rpcwaitq; void *pnfs_ld_data; /* per mount point data */ /* the following fields are protected by nfs_client->cl_lock */ struct rb_root state_owners; - struct rb_root openowner_id; - struct rb_root lockowner_id; #endif + struct ida openowner_id; + struct ida lockowner_id; struct list_head state_owners_lru; struct list_head layouts; struct list_head delegations; @@ -188,21 +195,23 @@ struct nfs_server { /* maximum number of slots to use */ -#define NFS4_MAX_SLOT_TABLE RPC_MAX_SLOT_TABLE +#define NFS4_DEF_SLOT_TABLE_SIZE (16U) +#define NFS4_MAX_SLOT_TABLE (256U) +#define NFS4_NO_SLOT ((u32)-1) #if defined(CONFIG_NFS_V4) /* Sessions */ -#define SLOT_TABLE_SZ (NFS4_MAX_SLOT_TABLE/(8*sizeof(long))) +#define SLOT_TABLE_SZ DIV_ROUND_UP(NFS4_MAX_SLOT_TABLE, 8*sizeof(long)) struct nfs4_slot_table { struct nfs4_slot *slots; /* seqid per slot */ unsigned long used_slots[SLOT_TABLE_SZ]; /* used/unused bitmap */ spinlock_t slot_tbl_lock; struct rpc_wait_queue slot_tbl_waitq; /* allocators may wait here */ - int max_slots; /* # slots in table */ - int highest_used_slotid; /* sent to server on each SEQ. + u32 max_slots; /* # slots in table */ + u32 highest_used_slotid; /* sent to server on each SEQ. * op for dynamic resizing */ - int target_max_slots; /* Set by CB_RECALL_SLOT as + u32 target_max_slots; /* Set by CB_RECALL_SLOT as * the new max_slots */ struct completion complete; }; diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h index 308c18877018..7eed2012d288 100644 --- a/include/linux/nfs_idmap.h +++ b/include/linux/nfs_idmap.h @@ -69,36 +69,22 @@ struct nfs_server; struct nfs_fattr; struct nfs4_string; -#ifdef CONFIG_NFS_USE_NEW_IDMAPPER - +#ifdef CONFIG_NFS_V4 int nfs_idmap_init(void); void nfs_idmap_quit(void); - -static inline int nfs_idmap_new(struct nfs_client *clp) -{ - return 0; -} - -static inline void nfs_idmap_delete(struct nfs_client *clp) -{ -} - -#else /* CONFIG_NFS_USE_NEW_IDMAPPER not set */ - +#else static inline int nfs_idmap_init(void) { return 0; } static inline void nfs_idmap_quit(void) -{ -} +{} +#endif int nfs_idmap_new(struct nfs_client *); void nfs_idmap_delete(struct nfs_client *); -#endif /* CONFIG_NFS_USE_NEW_IDMAPPER */ - void nfs_fattr_init_names(struct nfs_fattr *fattr, struct nfs4_string *owner_name, struct nfs4_string *group_name); diff --git a/include/linux/nfs_iostat.h b/include/linux/nfs_iostat.h index 8866bb3502ee..9dcbbe9a51fb 100644 --- a/include/linux/nfs_iostat.h +++ b/include/linux/nfs_iostat.h @@ -21,7 +21,7 @@ #ifndef _LINUX_NFS_IOSTAT #define _LINUX_NFS_IOSTAT -#define NFS_IOSTAT_VERS "1.0" +#define NFS_IOSTAT_VERS "1.1" /* * NFS byte counters diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h index ab465fe8c3d6..eac30d6bec17 100644 --- a/include/linux/nfs_page.h +++ b/include/linux/nfs_page.h @@ -19,12 +19,6 @@ #include <linux/kref.h> /* - * Valid flags for the radix tree - */ -#define NFS_PAGE_TAG_LOCKED 0 -#define NFS_PAGE_TAG_COMMIT 1 - -/* * Valid flags for a dirty buffer */ enum { @@ -33,16 +27,13 @@ enum { PG_CLEAN, PG_NEED_COMMIT, PG_NEED_RESCHED, - PG_PNFS_COMMIT, PG_PARTIAL_READ_FAILED, + PG_COMMIT_TO_DS, }; struct nfs_inode; struct nfs_page { - union { - struct list_head wb_list; /* Defines state of page: */ - struct pnfs_layout_segment *wb_commit_lseg; /* Used when PG_PNFS_COMMIT set */ - }; + struct list_head wb_list; /* Defines state of page: */ struct page *wb_page; /* page to read in/write out */ struct nfs_open_context *wb_context; /* File state context info */ struct nfs_lock_context *wb_lock_context; /* lock context info */ @@ -90,8 +81,6 @@ extern struct nfs_page *nfs_create_request(struct nfs_open_context *ctx, extern void nfs_release_request(struct nfs_page *req); -extern int nfs_scan_list(struct nfs_inode *nfsi, struct list_head *dst, - pgoff_t idx_start, unsigned int npages, int tag); extern void nfs_pageio_init(struct nfs_pageio_descriptor *desc, struct inode *inode, const struct nfs_pageio_ops *pg_ops, @@ -106,8 +95,6 @@ extern bool nfs_generic_pg_test(struct nfs_pageio_descriptor *desc, struct nfs_page *req); extern int nfs_wait_on_request(struct nfs_page *); extern void nfs_unlock_request(struct nfs_page *req); -extern int nfs_set_page_tag_locked(struct nfs_page *req); -extern void nfs_clear_page_tag_locked(struct nfs_page *req); /* * Lock the page of an asynchronous request without getting a new reference @@ -118,6 +105,16 @@ nfs_lock_request_dontget(struct nfs_page *req) return !test_and_set_bit(PG_BUSY, &req->wb_flags); } +static inline int +nfs_lock_request(struct nfs_page *req) +{ + if (test_and_set_bit(PG_BUSY, &req->wb_flags)) + return 0; + kref_get(&req->wb_kref); + return 1; +} + + /** * nfs_list_add_request - Insert a request into a list * @req: request diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index d6ba9a12591e..bfd0d1bf6707 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -2,7 +2,6 @@ #define _LINUX_NFS_XDR_H #include <linux/nfsacl.h> -#include <linux/nfs3.h> #include <linux/sunrpc/gss_api.h> /* @@ -89,11 +88,12 @@ struct nfs_fattr { #define NFS_ATTR_FATTR_PRECTIME (1U << 16) #define NFS_ATTR_FATTR_CHANGE (1U << 17) #define NFS_ATTR_FATTR_PRECHANGE (1U << 18) -#define NFS_ATTR_FATTR_V4_REFERRAL (1U << 19) /* NFSv4 referral */ -#define NFS_ATTR_FATTR_MOUNTPOINT (1U << 20) /* Treat as mountpoint */ -#define NFS_ATTR_FATTR_MOUNTED_ON_FILEID (1U << 21) -#define NFS_ATTR_FATTR_OWNER_NAME (1U << 22) -#define NFS_ATTR_FATTR_GROUP_NAME (1U << 23) +#define NFS_ATTR_FATTR_V4_LOCATIONS (1U << 19) +#define NFS_ATTR_FATTR_V4_REFERRAL (1U << 20) +#define NFS_ATTR_FATTR_MOUNTPOINT (1U << 21) +#define NFS_ATTR_FATTR_MOUNTED_ON_FILEID (1U << 22) +#define NFS_ATTR_FATTR_OWNER_NAME (1U << 23) +#define NFS_ATTR_FATTR_GROUP_NAME (1U << 24) #define NFS_ATTR_FATTR (NFS_ATTR_FATTR_TYPE \ | NFS_ATTR_FATTR_MODE \ @@ -182,7 +182,7 @@ struct nfs4_slot { struct nfs4_sequence_args { struct nfs4_session *sa_session; - u8 sa_slotid; + u32 sa_slotid; u8 sa_cache_this; }; @@ -977,6 +977,7 @@ struct nfs4_server_caps_res { u32 acl_bitmask; u32 has_links; u32 has_symlinks; + u32 fh_expire_type; struct nfs4_sequence_res seq_res; }; @@ -1055,14 +1056,6 @@ struct nfstime4 { }; #ifdef CONFIG_NFS_V4_1 -struct nfs_impl_id4 { - u32 domain_len; - char *domain; - u32 name_len; - char *name; - struct nfstime4 date; -}; - #define NFS4_EXCHANGE_ID_LEN (48) struct nfs41_exchange_id_args { struct nfs_client *client; @@ -1083,10 +1076,17 @@ struct server_scope { char server_scope[NFS4_OPAQUE_LIMIT]; }; +struct nfs41_impl_id { + char domain[NFS4_OPAQUE_LIMIT + 1]; + char name[NFS4_OPAQUE_LIMIT + 1]; + struct nfstime4 date; +}; + struct nfs41_exchange_id_res { struct nfs_client *client; u32 flags; struct server_scope *server_scope; + struct nfs41_impl_id *impl_id; }; struct nfs41_create_session_args { @@ -1192,6 +1192,27 @@ struct nfs_write_data { struct page *page_array[NFS_PAGEVEC_SIZE]; }; +struct nfs_unlinkdata { + struct hlist_node list; + struct nfs_removeargs args; + struct nfs_removeres res; + struct inode *dir; + struct rpc_cred *cred; + struct nfs_fattr dir_attr; +}; + +struct nfs_renamedata { + struct nfs_renameargs args; + struct nfs_renameres res; + struct rpc_cred *cred; + struct inode *old_dir; + struct dentry *old_dentry; + struct nfs_fattr old_fattr; + struct inode *new_dir; + struct dentry *new_dentry; + struct nfs_fattr new_fattr; +}; + struct nfs_access_entry; struct nfs_client; struct rpc_timeout; @@ -1221,10 +1242,12 @@ struct nfs_rpc_ops { struct iattr *, int, struct nfs_open_context *); int (*remove) (struct inode *, struct qstr *); void (*unlink_setup) (struct rpc_message *, struct inode *dir); + void (*unlink_rpc_prepare) (struct rpc_task *, struct nfs_unlinkdata *); int (*unlink_done) (struct rpc_task *, struct inode *); int (*rename) (struct inode *, struct qstr *, struct inode *, struct qstr *); void (*rename_setup) (struct rpc_message *msg, struct inode *dir); + void (*rename_rpc_prepare)(struct rpc_task *task, struct nfs_renamedata *); int (*rename_done) (struct rpc_task *task, struct inode *old_dir, struct inode *new_dir); int (*link) (struct inode *, struct inode *, struct qstr *); int (*symlink) (struct inode *, struct dentry *, struct page *, @@ -1244,8 +1267,10 @@ struct nfs_rpc_ops { int (*set_capabilities)(struct nfs_server *, struct nfs_fh *); int (*decode_dirent)(struct xdr_stream *, struct nfs_entry *, int); void (*read_setup) (struct nfs_read_data *, struct rpc_message *); + void (*read_rpc_prepare)(struct rpc_task *, struct nfs_read_data *); int (*read_done) (struct rpc_task *, struct nfs_read_data *); void (*write_setup) (struct nfs_write_data *, struct rpc_message *); + void (*write_rpc_prepare)(struct rpc_task *, struct nfs_write_data *); int (*write_done) (struct rpc_task *, struct nfs_write_data *); void (*commit_setup) (struct nfs_write_data *, struct rpc_message *); int (*commit_done) (struct rpc_task *, struct nfs_write_data *); @@ -1275,11 +1300,11 @@ struct nfs_rpc_ops { extern const struct nfs_rpc_ops nfs_v2_clientops; extern const struct nfs_rpc_ops nfs_v3_clientops; extern const struct nfs_rpc_ops nfs_v4_clientops; -extern struct rpc_version nfs_version2; -extern struct rpc_version nfs_version3; -extern struct rpc_version nfs_version4; +extern const struct rpc_version nfs_version2; +extern const struct rpc_version nfs_version3; +extern const struct rpc_version nfs_version4; -extern struct rpc_version nfsacl_version3; -extern struct rpc_program nfsacl_program; +extern const struct rpc_version nfsacl_version3; +extern const struct rpc_program nfsacl_program; #endif diff --git a/include/linux/nfsd/cld.h b/include/linux/nfsd/cld.h new file mode 100644 index 000000000000..f14a9ab06f1f --- /dev/null +++ b/include/linux/nfsd/cld.h @@ -0,0 +1,56 @@ +/* + * Upcall description for nfsdcld communication + * + * Copyright (c) 2012 Red Hat, Inc. + * Author(s): Jeff Layton <jlayton@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _NFSD_CLD_H +#define _NFSD_CLD_H + +/* latest upcall version available */ +#define CLD_UPCALL_VERSION 1 + +/* defined by RFC3530 */ +#define NFS4_OPAQUE_LIMIT 1024 + +enum cld_command { + Cld_Create, /* create a record for this cm_id */ + Cld_Remove, /* remove record of this cm_id */ + Cld_Check, /* is this cm_id allowed? */ + Cld_GraceDone, /* grace period is complete */ +}; + +/* representation of long-form NFSv4 client ID */ +struct cld_name { + uint16_t cn_len; /* length of cm_id */ + unsigned char cn_id[NFS4_OPAQUE_LIMIT]; /* client-provided */ +} __attribute__((packed)); + +/* message struct for communication with userspace */ +struct cld_msg { + uint8_t cm_vers; /* upcall version */ + uint8_t cm_cmd; /* upcall command */ + int16_t cm_status; /* return code */ + uint32_t cm_xid; /* transaction id */ + union { + int64_t cm_gracetime; /* grace period start time */ + struct cld_name cm_name; + } __attribute__((packed)) cm_u; +} __attribute__((packed)); + +#endif /* !_NFSD_CLD_H */ diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index 7454ad7451b4..89bd4a4dcfb4 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -41,6 +41,7 @@ #include <linux/types.h> #include <linux/ioctl.h> #include <linux/magic.h> +#include <linux/bug.h> #define NILFS_INODE_BMAP_SIZE 7 diff --git a/include/linux/nmi.h b/include/linux/nmi.h index 2d304efc89df..db50840e6355 100644 --- a/include/linux/nmi.h +++ b/include/linux/nmi.h @@ -14,7 +14,7 @@ * may be used to reset the timeout - for code which intentionally * disables interrupts for a long time. This call is stateless. */ -#if defined(ARCH_HAS_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR) +#if defined(CONFIG_HAVE_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR) #include <asm/nmi.h> extern void touch_nmi_watchdog(void); #else diff --git a/include/linux/of.h b/include/linux/of.h index d46a18ffbebb..fa7fb1d97458 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -58,9 +58,6 @@ struct device_node { struct kref kref; unsigned long _flags; void *data; -#if defined(CONFIG_EEH) - struct eeh_dev *edev; -#endif #if defined(CONFIG_SPARC) char *path_component_name; unsigned int unique_id; @@ -75,13 +72,6 @@ struct of_phandle_args { uint32_t args[MAX_PHANDLE_ARGS]; }; -#if defined(CONFIG_EEH) -static inline struct eeh_dev *of_node_to_eeh_dev(struct device_node *dn) -{ - return dn->edev; -} -#endif - #ifdef CONFIG_OF_DYNAMIC extern struct device_node *of_node_get(struct device_node *node); extern void of_node_put(struct device_node *node); @@ -361,6 +351,22 @@ static inline int of_machine_is_compatible(const char *compat) #define of_match_node(_matches, _node) NULL #endif /* CONFIG_OF */ +/** + * of_property_read_bool - Findfrom a property + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * + * Search for a property in a device node. + * Returns true if the property exist false otherwise. + */ +static inline bool of_property_read_bool(const struct device_node *np, + const char *propname) +{ + struct property *prop = of_find_property(np, propname, NULL); + + return prop ? true : false; +} + static inline int of_property_read_u32(const struct device_node *np, const char *propname, u32 *out_value) diff --git a/include/linux/of_device.h b/include/linux/of_device.h index cbc42143fa5b..901b7435e890 100644 --- a/include/linux/of_device.h +++ b/include/linux/of_device.h @@ -5,10 +5,11 @@ #include <linux/of_platform.h> /* temporary until merge */ #ifdef CONFIG_OF_DEVICE -#include <linux/device.h> #include <linux/of.h> #include <linux/mod_devicetable.h> +struct device; + extern const struct of_device_id *of_match_device( const struct of_device_id *matches, const struct device *dev); extern void of_device_make_bus_id(struct device *dev); diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h index b254052a49d7..81733d12cbea 100644 --- a/include/linux/of_gpio.h +++ b/include/linux/of_gpio.h @@ -50,7 +50,8 @@ static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc) extern int of_get_named_gpio_flags(struct device_node *np, const char *list_name, int index, enum of_gpio_flags *flags); -extern unsigned int of_gpio_count(struct device_node *np); +extern unsigned int of_gpio_named_count(struct device_node *np, + const char* propname); extern int of_mm_gpiochip_add(struct device_node *np, struct of_mm_gpio_chip *mm_gc); @@ -71,7 +72,8 @@ static inline int of_get_named_gpio_flags(struct device_node *np, return -ENOSYS; } -static inline unsigned int of_gpio_count(struct device_node *np) +static inline unsigned int of_gpio_named_count(struct device_node *np, + const char* propname) { return 0; } @@ -89,6 +91,27 @@ static inline void of_gpiochip_remove(struct gpio_chip *gc) { } #endif /* CONFIG_OF_GPIO */ /** + * of_gpio_count - Count GPIOs for a device + * @np: device node to count GPIOs for + * + * The function returns the count of GPIOs specified for a node. + * + * Note that the empty GPIO specifiers counts too. For example, + * + * gpios = <0 + * &pio1 1 2 + * 0 + * &pio2 3 4>; + * + * defines four GPIOs (so this function will return 4), two of which + * are not specified. + */ +static inline unsigned int of_gpio_count(struct device_node *np) +{ + return of_gpio_named_count(np, "gpios"); +} + +/** * of_get_gpio_flags() - Get a GPIO number and flags to use with GPIO API * @np: device node to get GPIO from * @index: index of the GPIO diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h new file mode 100644 index 000000000000..bae1b6094c63 --- /dev/null +++ b/include/linux/of_mtd.h @@ -0,0 +1,19 @@ +/* + * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * OF helpers for mtd. + * + * This file is released under the GPLv2 + */ + +#ifndef __LINUX_OF_MTD_H +#define __LINUX_OF_NET_H + +#ifdef CONFIG_OF_MTD +#include <linux/of.h> +extern const int of_get_nand_ecc_mode(struct device_node *np); +int of_get_nand_bus_width(struct device_node *np); +bool of_get_nand_on_flash_bbt(struct device_node *np); +#endif + +#endif /* __LINUX_OF_MTD_H */ diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h index c0b018790f07..4ff57e81051d 100644 --- a/include/linux/omapfb.h +++ b/include/linux/omapfb.h @@ -222,41 +222,11 @@ struct omapfb_display_info { #include <plat/board.h> -#ifdef CONFIG_ARCH_OMAP1 -#define OMAPFB_PLANE_NUM 1 -#else -#define OMAPFB_PLANE_NUM 3 -#endif - -struct omapfb_mem_region { - u32 paddr; - void __iomem *vaddr; - unsigned long size; - u8 type; /* OMAPFB_PLANE_MEM_* */ - enum omapfb_color_format format;/* OMAPFB_COLOR_* */ - unsigned format_used:1; /* Must be set when format is set. - * Needed b/c of the badly chosen 0 - * base for OMAPFB_COLOR_* values - */ - unsigned alloc:1; /* allocated by the driver */ - unsigned map:1; /* kernel mapped by the driver */ -}; - -struct omapfb_mem_desc { - int region_cnt; - struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; -}; - struct omapfb_platform_data { struct omap_lcd_config lcd; - struct omapfb_mem_desc mem_desc; - void *ctrl_platform_data; }; -/* in arch/arm/plat-omap/fb.c */ -extern void omapfb_set_platform_data(struct omapfb_platform_data *data); -extern void omapfb_set_ctrl_platform_data(void *pdata); -extern void omapfb_reserve_sdram_memblock(void); +void __init omapfb_set_lcd_config(const struct omap_lcd_config *config); #endif diff --git a/include/linux/opp.h b/include/linux/opp.h index ee94b33080c2..2a4e5faee904 100644 --- a/include/linux/opp.h +++ b/include/linux/opp.h @@ -19,6 +19,7 @@ #include <linux/notifier.h> struct opp; +struct device; enum opp_event { OPP_EVENT_ADD, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE, diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 6b25758e028e..c88d2a9451af 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -6,6 +6,7 @@ #define PAGE_FLAGS_H #include <linux/types.h> +#include <linux/bug.h> #ifndef __GENERATING_BOUNDS_H #include <linux/mm_types.h> #include <generated/bounds.h> diff --git a/include/linux/parport.h b/include/linux/parport.h index 38a423ed3c01..106c2ca9440b 100644 --- a/include/linux/parport.h +++ b/include/linux/parport.h @@ -100,7 +100,6 @@ typedef enum { #include <linux/wait.h> #include <linux/irqreturn.h> #include <linux/semaphore.h> -#include <asm/system.h> #include <asm/ptrace.h> /* Define this later. */ diff --git a/include/linux/pci.h b/include/linux/pci.h index 27bf521bcebd..e444f5b49118 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -299,7 +299,6 @@ struct pci_dev { */ unsigned int irq; struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */ - resource_size_t fw_addr[DEVICE_COUNT_RESOURCE]; /* FW-assigned addr */ /* These fields are used by common fixups */ unsigned int transparent:1; /* Transparent PCI bridge */ @@ -369,24 +368,17 @@ static inline int pci_channel_offline(struct pci_dev *pdev) return (pdev->error_state != pci_channel_io_normal); } -static inline struct pci_cap_saved_state *pci_find_saved_cap( - struct pci_dev *pci_dev, char cap) -{ - struct pci_cap_saved_state *tmp; - struct hlist_node *pos; - - hlist_for_each_entry(tmp, pos, &pci_dev->saved_cap_space, next) { - if (tmp->cap.cap_nr == cap) - return tmp; - } - return NULL; -} +struct pci_host_bridge_window { + struct list_head list; + struct resource *res; /* host bridge aperture (CPU address) */ + resource_size_t offset; /* bus address + offset = CPU address */ +}; -static inline void pci_add_saved_cap(struct pci_dev *pci_dev, - struct pci_cap_saved_state *new_cap) -{ - hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space); -} +struct pci_host_bridge { + struct list_head list; + struct pci_bus *bus; /* root bus */ + struct list_head windows; /* pci_host_bridge_windows */ +}; /* * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond @@ -656,6 +648,10 @@ void pci_fixup_cardbus(struct pci_bus *); /* Generic PCI functions used internally */ +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res); +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); void pcibios_scan_specific_bus(int busn); extern struct pci_bus *pci_find_bus(int domain, int busnr); void pci_bus_add_devices(const struct pci_bus *bus); @@ -690,7 +686,8 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp); extern struct pci_dev *pci_dev_get(struct pci_dev *dev); extern void pci_dev_put(struct pci_dev *dev); extern void pci_remove_bus(struct pci_bus *b); -extern void pci_remove_bus_device(struct pci_dev *dev); +extern void __pci_remove_bus_device(struct pci_dev *dev); +extern void pci_stop_and_remove_bus_device(struct pci_dev *dev); extern void pci_stop_bus_device(struct pci_dev *dev); void pci_setup_cardbus(struct pci_bus *bus); extern void pci_sort_breadthfirst(void); @@ -817,6 +814,7 @@ int pcie_set_readrq(struct pci_dev *dev, int rq); int pcie_get_mps(struct pci_dev *dev); int pcie_set_mps(struct pci_dev *dev, int mps); int __pci_reset_function(struct pci_dev *dev); +int __pci_reset_function_locked(struct pci_dev *dev); int pci_reset_function(struct pci_dev *dev); void pci_update_resource(struct pci_dev *dev, int resno); int __must_check pci_assign_resource(struct pci_dev *dev, int i); @@ -882,6 +880,7 @@ void set_pcie_hotplug_bridge(struct pci_dev *pdev); /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); #ifdef CONFIG_HOTPLUG +unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge); unsigned int pci_rescan_bus(struct pci_bus *bus); #endif @@ -891,13 +890,13 @@ ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void int pci_vpd_truncate(struct pci_dev *dev, size_t size); /* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */ +resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx); void pci_bus_assign_resources(const struct pci_bus *bus); void pci_bus_size_bridges(struct pci_bus *bus); int pci_claim_resource(struct pci_dev *, int); void pci_assign_unassigned_resources(void); void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge); void pdev_enable_device(struct pci_dev *); -void pdev_sort_resources(struct pci_dev *, struct resource_list *); int pci_enable_resources(struct pci_dev *, int mask); void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *), int (*)(const struct pci_dev *, u8, u8)); @@ -914,6 +913,8 @@ void pci_release_selected_regions(struct pci_dev *, int); /* drivers/pci/bus.c */ void pci_add_resource(struct list_head *resources, struct resource *res); +void pci_add_resource_offset(struct list_head *resources, struct resource *res, + resource_size_t offset); void pci_free_resource_list(struct list_head *resources); void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags); struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n); @@ -959,7 +960,7 @@ void pci_unregister_driver(struct pci_driver *dev); module_driver(__pci_driver, pci_register_driver, \ pci_unregister_driver) -void pci_remove_behind_bridge(struct pci_dev *dev); +void pci_stop_and_remove_behind_bridge(struct pci_dev *dev); struct pci_driver *pci_dev_driver(const struct pci_dev *dev); int pci_add_dynid(struct pci_driver *drv, unsigned int vendor, unsigned int device, @@ -1395,7 +1396,10 @@ static inline void pci_resource_to_user(const struct pci_dev *dev, int bar, */ struct pci_fixup { - u16 vendor, device; /* You can use PCI_ANY_ID here of course */ + u16 vendor; /* You can use PCI_ANY_ID here of course */ + u16 device; /* You can use PCI_ANY_ID here of course */ + u32 class; /* You can use PCI_ANY_ID here too */ + unsigned int class_shift; /* should be 0, 8, 16 */ void (*hook)(struct pci_dev *dev); }; @@ -1410,30 +1414,68 @@ enum pci_fixup_pass { }; /* Anonymous variables would be nice... */ -#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook) \ - static const struct pci_fixup __pci_fixup_##name __used \ - __attribute__((__section__(#section))) = { vendor, device, hook }; +#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class, \ + class_shift, hook) \ + static const struct pci_fixup const __pci_fixup_##name __used \ + __attribute__((__section__(#section), aligned((sizeof(void *))))) \ + = { vendor, device, class, class_shift, hook }; + +#define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ + vendor##device##hook, vendor, device, class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \ + vendor##device##hook, vendor, device, class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \ + vendor##device##hook, vendor, device, class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \ + vendor##device##hook, vendor, device, class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ + resume##vendor##device##hook, vendor, device, class, \ + class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ + resume_early##vendor##device##hook, vendor, device, \ + class, class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ + suspend##vendor##device##hook, vendor, device, class, \ + class_shift, hook) + #define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ - vendor##device##hook, vendor, device, hook) + vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \ - vendor##device##hook, vendor, device, hook) + vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \ - vendor##device##hook, vendor, device, hook) + vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \ - vendor##device##hook, vendor, device, hook) + vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ - resume##vendor##device##hook, vendor, device, hook) + resume##vendor##device##hook, vendor, device, \ + PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ - resume_early##vendor##device##hook, vendor, device, hook) + resume_early##vendor##device##hook, vendor, device, \ + PCI_ANY_ID, 0, hook) #define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ - suspend##vendor##device##hook, vendor, device, hook) + suspend##vendor##device##hook, vendor, device, \ + PCI_ANY_ID, 0, hook) #ifdef CONFIG_PCI_QUIRKS void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index e41a10f5ae83..4b608f543412 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -391,6 +391,7 @@ #define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ #define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ #define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ +#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */ #define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ #define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ #define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ diff --git a/include/linux/phy.h b/include/linux/phy.h index c599f7eca1e7..6fe0a37d4abf 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -19,7 +19,6 @@ #define __PHY_H #include <linux/spinlock.h> -#include <linux/device.h> #include <linux/ethtool.h> #include <linux/mii.h> #include <linux/timer.h> @@ -88,6 +87,9 @@ typedef enum { IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ #define MII_ADDR_C45 (1<<30) +struct device; +struct sk_buff; + /* * The Bus class for PHYs. Devices which provide access to * PHYs should register using this structure @@ -241,7 +243,6 @@ enum phy_state { PHY_RESUMING }; -struct sk_buff; /* phy_device: An instance of a PHY * diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index e7cf6669ac34..b067bd8c49d0 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -2,6 +2,7 @@ #define _LINUX_PID_NS_H #include <linux/sched.h> +#include <linux/bug.h> #include <linux/mm.h> #include <linux/threads.h> #include <linux/nsproxy.h> @@ -32,6 +33,7 @@ struct pid_namespace { #endif gid_t pid_gid; int hide_pid; + int reboot; /* group exit code if this pidns was rebooted */ }; extern struct pid_namespace init_pid_ns; @@ -47,6 +49,7 @@ static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns) extern struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *ns); extern void free_pid_ns(struct kref *kref); extern void zap_pid_ns_processes(struct pid_namespace *pid_ns); +extern int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd); static inline void put_pid_ns(struct pid_namespace *ns) { @@ -74,11 +77,15 @@ static inline void put_pid_ns(struct pid_namespace *ns) { } - static inline void zap_pid_ns_processes(struct pid_namespace *ns) { BUG(); } + +static inline int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd) +{ + return 0; +} #endif /* CONFIG_PID_NS */ extern struct pid_namespace *task_active_pid_ns(struct task_struct *tsk); diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h new file mode 100644 index 000000000000..191e72688481 --- /dev/null +++ b/include/linux/pinctrl/consumer.h @@ -0,0 +1,159 @@ +/* + * Consumer interface the pin control subsystem + * + * Copyright (C) 2012 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * Based on bits of regulator core, gpio core and clk core + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __LINUX_PINCTRL_CONSUMER_H +#define __LINUX_PINCTRL_CONSUMER_H + +#include <linux/err.h> +#include <linux/list.h> +#include <linux/seq_file.h> +#include "pinctrl-state.h" + +/* This struct is private to the core and should be regarded as a cookie */ +struct pinctrl; +struct pinctrl_state; + +#ifdef CONFIG_PINCTRL + +/* External interface to pin control */ +extern int pinctrl_request_gpio(unsigned gpio); +extern void pinctrl_free_gpio(unsigned gpio); +extern int pinctrl_gpio_direction_input(unsigned gpio); +extern int pinctrl_gpio_direction_output(unsigned gpio); + +extern struct pinctrl * __must_check pinctrl_get(struct device *dev); +extern void pinctrl_put(struct pinctrl *p); +extern struct pinctrl_state * __must_check pinctrl_lookup_state( + struct pinctrl *p, + const char *name); +extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s); + +#else /* !CONFIG_PINCTRL */ + +static inline int pinctrl_request_gpio(unsigned gpio) +{ + return 0; +} + +static inline void pinctrl_free_gpio(unsigned gpio) +{ +} + +static inline int pinctrl_gpio_direction_input(unsigned gpio) +{ + return 0; +} + +static inline int pinctrl_gpio_direction_output(unsigned gpio) +{ + return 0; +} + +static inline struct pinctrl * __must_check pinctrl_get(struct device *dev) +{ + return NULL; +} + +static inline void pinctrl_put(struct pinctrl *p) +{ +} + +static inline struct pinctrl_state * __must_check pinctrl_lookup_state( + struct pinctrl *p, + const char *name) +{ + return NULL; +} + +static inline int pinctrl_select_state(struct pinctrl *p, + struct pinctrl_state *s) +{ + return 0; +} + +#endif /* CONFIG_PINCTRL */ + +static inline struct pinctrl * __must_check pinctrl_get_select( + struct device *dev, const char *name) +{ + struct pinctrl *p; + struct pinctrl_state *s; + int ret; + + p = pinctrl_get(dev); + if (IS_ERR(p)) + return p; + + s = pinctrl_lookup_state(p, name); + if (IS_ERR(s)) { + pinctrl_put(p); + return ERR_PTR(PTR_ERR(s)); + } + + ret = pinctrl_select_state(p, s); + if (ret < 0) { + pinctrl_put(p); + return ERR_PTR(ret); + } + + return p; +} + +static inline struct pinctrl * __must_check pinctrl_get_select_default( + struct device *dev) +{ + return pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT); +} + +#ifdef CONFIG_PINCONF + +extern int pin_config_get(const char *dev_name, const char *name, + unsigned long *config); +extern int pin_config_set(const char *dev_name, const char *name, + unsigned long config); +extern int pin_config_group_get(const char *dev_name, + const char *pin_group, + unsigned long *config); +extern int pin_config_group_set(const char *dev_name, + const char *pin_group, + unsigned long config); + +#else + +static inline int pin_config_get(const char *dev_name, const char *name, + unsigned long *config) +{ + return 0; +} + +static inline int pin_config_set(const char *dev_name, const char *name, + unsigned long config) +{ + return 0; +} + +static inline int pin_config_group_get(const char *dev_name, + const char *pin_group, + unsigned long *config) +{ + return 0; +} + +static inline int pin_config_group_set(const char *dev_name, + const char *pin_group, + unsigned long config) +{ + return 0; +} + +#endif + +#endif /* __LINUX_PINCTRL_CONSUMER_H */ diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h index d0aecb7f6fb9..fee4349364f7 100644 --- a/include/linux/pinctrl/machine.h +++ b/include/linux/pinctrl/machine.h @@ -9,87 +9,153 @@ * * License terms: GNU General Public License (GPL) version 2 */ -#ifndef __LINUX_PINMUX_MACHINE_H -#define __LINUX_PINMUX_MACHINE_H +#ifndef __LINUX_PINCTRL_MACHINE_H +#define __LINUX_PINCTRL_MACHINE_H + +#include "pinctrl-state.h" + +enum pinctrl_map_type { + PIN_MAP_TYPE_INVALID, + PIN_MAP_TYPE_DUMMY_STATE, + PIN_MAP_TYPE_MUX_GROUP, + PIN_MAP_TYPE_CONFIGS_PIN, + PIN_MAP_TYPE_CONFIGS_GROUP, +}; + +/** + * struct pinctrl_map_mux - mapping table content for MAP_TYPE_MUX_GROUP + * @group: the name of the group whose mux function is to be configured. This + * field may be left NULL, and the first applicable group for the function + * will be used. + * @function: the mux function to select for the group + */ +struct pinctrl_map_mux { + const char *group; + const char *function; +}; /** - * struct pinmux_map - boards/machines shall provide this map for devices + * struct pinctrl_map_configs - mapping table content for MAP_TYPE_CONFIGS_* + * @group_or_pin: the name of the pin or group whose configuration parameters + * are to be configured. + * @configs: a pointer to an array of config parameters/values to program into + * hardware. Each individual pin controller defines the format and meaning + * of config parameters. + * @num_configs: the number of entries in array @configs + */ +struct pinctrl_map_configs { + const char *group_or_pin; + unsigned long *configs; + unsigned num_configs; +}; + +/** + * struct pinctrl_map - boards/machines shall provide this map for devices + * @dev_name: the name of the device using this specific mapping, the name + * must be the same as in your struct device*. If this name is set to the + * same name as the pin controllers own dev_name(), the map entry will be + * hogged by the driver itself upon registration * @name: the name of this specific map entry for the particular machine. - * This is the second parameter passed to pinmux_get() when you want - * to have several mappings to the same device - * @ctrl_dev: the pin control device to be used by this mapping, may be NULL - * if you provide .ctrl_dev_name instead (this is more common) + * This is the parameter passed to pinmux_lookup_state() + * @type: the type of mapping table entry * @ctrl_dev_name: the name of the device controlling this specific mapping, - * the name must be the same as in your struct device*, may be NULL if - * you provide .ctrl_dev instead - * @function: a function in the driver to use for this mapping, the driver - * will lookup the function referenced by this ID on the specified - * pin control device - * @group: sometimes a function can map to different pin groups, so this - * selects a certain specific pin group to activate for the function, if - * left as NULL, the first applicable group will be used - * @dev: the device using this specific mapping, may be NULL if you provide - * .dev_name instead (this is more common) - * @dev_name: the name of the device using this specific mapping, the name - * must be the same as in your struct device*, may be NULL if you - * provide .dev instead - * @hog_on_boot: if this is set to true, the pin control subsystem will itself - * hog the mappings as the pinmux device drivers are attached, so this is - * typically used with system maps (mux mappings without an assigned - * device) that you want to get hogged and enabled by default as soon as - * a pinmux device supporting it is registered. These maps will not be - * disabled and put until the system shuts down. + * the name must be the same as in your struct device*. This field is not + * used for PIN_MAP_TYPE_DUMMY_STATE + * @data: Data specific to the mapping type */ -struct pinmux_map { +struct pinctrl_map { + const char *dev_name; const char *name; - struct device *ctrl_dev; + enum pinctrl_map_type type; const char *ctrl_dev_name; - const char *function; - const char *group; - struct device *dev; - const char *dev_name; - bool hog_on_boot; + union { + struct pinctrl_map_mux mux; + struct pinctrl_map_configs configs; + } data; }; -/* - * Convenience macro to set a simple map from a certain pin controller and a - * certain function to a named device - */ -#define PINMUX_MAP(a, b, c, d) \ - { .name = a, .ctrl_dev_name = b, .function = c, .dev_name = d } +/* Convenience macros to create mapping table entries */ -/* - * Convenience macro to map a system function onto a certain pinctrl device. - * System functions are not assigned to a particular device. - */ -#define PINMUX_MAP_SYS(a, b, c) \ - { .name = a, .ctrl_dev_name = b, .function = c } +#define PIN_MAP_DUMMY_STATE(dev, state) \ + { \ + .dev_name = dev, \ + .name = state, \ + .type = PIN_MAP_TYPE_DUMMY_STATE, \ + } -/* - * Convenience macro to map a system function onto a certain pinctrl device, - * to be hogged by the pinmux core until the system shuts down. - */ -#define PINMUX_MAP_SYS_HOG(a, b, c) \ - { .name = a, .ctrl_dev_name = b, .function = c, \ - .hog_on_boot = true } +#define PIN_MAP_MUX_GROUP(dev, state, pinctrl, grp, func) \ + { \ + .dev_name = dev, \ + .name = state, \ + .type = PIN_MAP_TYPE_MUX_GROUP, \ + .ctrl_dev_name = pinctrl, \ + .data.mux = { \ + .group = grp, \ + .function = func, \ + }, \ + } -/* - * Convenience macro to map a system function onto a certain pinctrl device - * using a specified group, to be hogged by the pinmux core until the system - * shuts down. - */ -#define PINMUX_MAP_SYS_HOG_GROUP(a, b, c, d) \ - { .name = a, .ctrl_dev_name = b, .function = c, .group = d, \ - .hog_on_boot = true } +#define PIN_MAP_MUX_GROUP_DEFAULT(dev, pinctrl, grp, func) \ + PIN_MAP_MUX_GROUP(dev, PINCTRL_STATE_DEFAULT, pinctrl, grp, func) + +#define PIN_MAP_MUX_GROUP_HOG(dev, state, grp, func) \ + PIN_MAP_MUX_GROUP(dev, state, dev, grp, func) + +#define PIN_MAP_MUX_GROUP_HOG_DEFAULT(dev, grp, func) \ + PIN_MAP_MUX_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, func) + +#define PIN_MAP_CONFIGS_PIN(dev, state, pinctrl, pin, cfgs) \ + { \ + .dev_name = dev, \ + .name = state, \ + .type = PIN_MAP_TYPE_CONFIGS_PIN, \ + .ctrl_dev_name = pinctrl, \ + .data.configs = { \ + .group_or_pin = pin, \ + .configs = cfgs, \ + .num_configs = ARRAY_SIZE(cfgs), \ + }, \ + } + +#define PIN_MAP_CONFIGS_PIN_DEFAULT(dev, pinctrl, pin, cfgs) \ + PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_DEFAULT, pinctrl, pin, cfgs) + +#define PIN_MAP_CONFIGS_PIN_HOG(dev, state, pin, cfgs) \ + PIN_MAP_CONFIGS_PIN(dev, state, dev, pin, cfgs) + +#define PIN_MAP_CONFIGS_PIN_HOG_DEFAULT(dev, pin, cfgs) \ + PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_DEFAULT, dev, pin, cfgs) + +#define PIN_MAP_CONFIGS_GROUP(dev, state, pinctrl, grp, cfgs) \ + { \ + .dev_name = dev, \ + .name = state, \ + .type = PIN_MAP_TYPE_CONFIGS_GROUP, \ + .ctrl_dev_name = pinctrl, \ + .data.configs = { \ + .group_or_pin = grp, \ + .configs = cfgs, \ + .num_configs = ARRAY_SIZE(cfgs), \ + }, \ + } + +#define PIN_MAP_CONFIGS_GROUP_DEFAULT(dev, pinctrl, grp, cfgs) \ + PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, pinctrl, grp, cfgs) + +#define PIN_MAP_CONFIGS_GROUP_HOG(dev, state, grp, cfgs) \ + PIN_MAP_CONFIGS_GROUP(dev, state, dev, grp, cfgs) + +#define PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(dev, grp, cfgs) \ + PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, cfgs) #ifdef CONFIG_PINMUX -extern int pinmux_register_mappings(struct pinmux_map const *map, +extern int pinctrl_register_mappings(struct pinctrl_map const *map, unsigned num_maps); #else -static inline int pinmux_register_mappings(struct pinmux_map const *map, +static inline int pinctrl_register_mappings(struct pinctrl_map const *map, unsigned num_maps) { return 0; diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h new file mode 100644 index 000000000000..4f0abb9f1c09 --- /dev/null +++ b/include/linux/pinctrl/pinconf-generic.h @@ -0,0 +1,114 @@ +/* + * Interface the generic pinconfig portions of the pinctrl subsystem + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * This interface is used in the core to keep track of pins. + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __LINUX_PINCTRL_PINCONF_GENERIC_H +#define __LINUX_PINCTRL_PINCONF_GENERIC_H + +/* + * You shouldn't even be able to compile with these enums etc unless you're + * using generic pin config. That is why this is defined out. + */ +#ifdef CONFIG_GENERIC_PINCONF + +/** + * enum pin_config_param - possible pin configuration parameters + * @PIN_CONFIG_BIAS_DISABLE: disable any pin bias on the pin, a + * transition from say pull-up to pull-down implies that you disable + * pull-up in the process, this setting disables all biasing. + * @PIN_CONFIG_BIAS_HIGH_IMPEDANCE: the pin will be set to a high impedance + * mode, also know as "third-state" (tristate) or "high-Z" or "floating". + * On output pins this effectively disconnects the pin, which is useful + * if for example some other pin is going to drive the signal connected + * to it for a while. Pins used for input are usually always high + * impedance. + * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high + * impedance to VDD). If the argument is != 0 pull-up is enabled, + * if it is 0, pull-up is disabled. + * @PIN_CONFIG_BIAS_PULL_DOWN: the pin will be pulled down (usually with high + * impedance to GROUND). If the argument is != 0 pull-down is enabled, + * if it is 0, pull-down is disabled. + * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and + * low, this is the most typical case and is typically achieved with two + * active transistors on the output. Sending this config will enabale + * push-pull mode, the argument is ignored. + * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open + * collector) which means it is usually wired with other output ports + * which are then pulled up with an external resistor. Sending this + * config will enabale open drain mode, the argument is ignored. + * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source + * (open emitter). Sending this config will enabale open drain mode, the + * argument is ignored. + * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in + * schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis, + * the threshold value is given on a custom format as argument when + * setting pins to this mode. The argument zero turns the schmitt trigger + * off. + * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode, + * which means it will wait for signals to settle when reading inputs. The + * argument gives the debounce time on a custom format. Setting the + * argument to zero turns debouncing off. + * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power + * supplies, the argument to this parameter (on a custom format) tells + * the driver which alternative power source to use. + * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power + * operation, if several modes of operation are supported these can be + * passed in the argument on a custom form, else just use argument 1 + * to indicate low power mode, argument 0 turns low power mode off. + * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if + * you need to pass in custom configurations to the pin controller, use + * PIN_CONFIG_END+1 as the base offset. + */ +enum pin_config_param { + PIN_CONFIG_BIAS_DISABLE, + PIN_CONFIG_BIAS_HIGH_IMPEDANCE, + PIN_CONFIG_BIAS_PULL_UP, + PIN_CONFIG_BIAS_PULL_DOWN, + PIN_CONFIG_DRIVE_PUSH_PULL, + PIN_CONFIG_DRIVE_OPEN_DRAIN, + PIN_CONFIG_DRIVE_OPEN_SOURCE, + PIN_CONFIG_INPUT_SCHMITT, + PIN_CONFIG_INPUT_DEBOUNCE, + PIN_CONFIG_POWER_SOURCE, + PIN_CONFIG_LOW_POWER_MODE, + PIN_CONFIG_END = 0x7FFF, +}; + +/* + * Helpful configuration macro to be used in tables etc. + */ +#define PIN_CONF_PACKED(p, a) ((a << 16) | ((unsigned long) p & 0xffffUL)) + +/* + * The following inlines stuffs a configuration parameter and data value + * into and out of an unsigned long argument, as used by the generic pin config + * system. We put the parameter in the lower 16 bits and the argument in the + * upper 16 bits. + */ + +static inline enum pin_config_param pinconf_to_config_param(unsigned long config) +{ + return (enum pin_config_param) (config & 0xffffUL); +} + +static inline u16 pinconf_to_config_argument(unsigned long config) +{ + return (enum pin_config_param) ((config >> 16) & 0xffffUL); +} + +static inline unsigned long pinconf_to_config_packed(enum pin_config_param param, + u16 argument) +{ + return PIN_CONF_PACKED(param, argument); +} + +#endif /* CONFIG_GENERIC_PINCONF */ + +#endif /* __LINUX_PINCTRL_PINCONF_GENERIC_H */ diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h index 477922cf043a..ec431f03362d 100644 --- a/include/linux/pinctrl/pinconf.h +++ b/include/linux/pinctrl/pinconf.h @@ -20,6 +20,8 @@ struct seq_file; /** * struct pinconf_ops - pin config operations, to be implemented by * pin configuration capable drivers. + * @is_generic: for pin controllers that want to use the generic interface, + * this flag tells the framework that it's generic. * @pin_config_get: get the config of a certain pin, if the requested config * is not available on this controller this should return -ENOTSUPP * and if it is available but disabled it should return -EINVAL @@ -33,6 +35,9 @@ struct seq_file; * per-device info for a certain group in debugfs */ struct pinconf_ops { +#ifdef CONFIG_GENERIC_PINCONF + bool is_generic; +#endif int (*pin_config_get) (struct pinctrl_dev *pctldev, unsigned pin, unsigned long *config); @@ -53,45 +58,6 @@ struct pinconf_ops { unsigned selector); }; -extern int pin_config_get(const char *dev_name, const char *name, - unsigned long *config); -extern int pin_config_set(const char *dev_name, const char *name, - unsigned long config); -extern int pin_config_group_get(const char *dev_name, - const char *pin_group, - unsigned long *config); -extern int pin_config_group_set(const char *dev_name, - const char *pin_group, - unsigned long config); - -#else - -static inline int pin_config_get(const char *dev_name, const char *name, - unsigned long *config) -{ - return 0; -} - -static inline int pin_config_set(const char *dev_name, const char *name, - unsigned long config) -{ - return 0; -} - -static inline int pin_config_group_get(const char *dev_name, - const char *pin_group, - unsigned long *config) -{ - return 0; -} - -static inline int pin_config_group_set(const char *dev_name, - const char *pin_group, - unsigned long config) -{ - return 0; -} - #endif #endif /* __LINUX_PINCTRL_PINCONF_H */ diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h new file mode 100644 index 000000000000..3920e28b4da7 --- /dev/null +++ b/include/linux/pinctrl/pinctrl-state.h @@ -0,0 +1,6 @@ +/* + * Standard pin control state definitions + */ + +#define PINCTRL_STATE_DEFAULT "default" +#define PINCTRL_STATE_IDLE "idle" diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 8bd22ee7aa09..4e9f0788c221 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -15,10 +15,11 @@ #ifdef CONFIG_PINCTRL #include <linux/radix-tree.h> -#include <linux/spinlock.h> #include <linux/list.h> #include <linux/seq_file.h> +#include "pinctrl-state.h" +struct device; struct pinctrl_dev; struct pinmux_ops; struct pinconf_ops; diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h index 937b3e2fa36f..47e9237edd47 100644 --- a/include/linux/pinctrl/pinmux.h +++ b/include/linux/pinctrl/pinmux.h @@ -16,9 +16,6 @@ #include <linux/seq_file.h> #include "pinctrl.h" -/* This struct is private to the core and should be regarded as a cookie */ -struct pinmux; - #ifdef CONFIG_PINMUX struct pinctrl_dev; @@ -88,55 +85,6 @@ struct pinmux_ops { bool input); }; -/* External interface to pinmux */ -extern int pinmux_request_gpio(unsigned gpio); -extern void pinmux_free_gpio(unsigned gpio); -extern int pinmux_gpio_direction_input(unsigned gpio); -extern int pinmux_gpio_direction_output(unsigned gpio); -extern struct pinmux * __must_check pinmux_get(struct device *dev, const char *name); -extern void pinmux_put(struct pinmux *pmx); -extern int pinmux_enable(struct pinmux *pmx); -extern void pinmux_disable(struct pinmux *pmx); - -#else /* !CONFIG_PINMUX */ - -static inline int pinmux_request_gpio(unsigned gpio) -{ - return 0; -} - -static inline void pinmux_free_gpio(unsigned gpio) -{ -} - -static inline int pinmux_gpio_direction_input(unsigned gpio) -{ - return 0; -} - -static inline int pinmux_gpio_direction_output(unsigned gpio) -{ - return 0; -} - -static inline struct pinmux * __must_check pinmux_get(struct device *dev, const char *name) -{ - return NULL; -} - -static inline void pinmux_put(struct pinmux *pmx) -{ -} - -static inline int pinmux_enable(struct pinmux *pmx) -{ - return 0; -} - -static inline void pinmux_disable(struct pinmux *pmx) -{ -} - #endif /* CONFIG_PINMUX */ #endif /* __LINUX_PINCTRL_PINMUX_H */ diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index 77257c92155a..6d626ff0cfd0 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -1,8 +1,6 @@ #ifndef _LINUX_PIPE_FS_I_H #define _LINUX_PIPE_FS_I_H -#define PIPEFS_MAGIC 0x50495045 - #define PIPE_DEF_BUFFERS 16 #define PIPE_BUF_FLAG_LRU 0x01 /* page is on the LRU */ diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h new file mode 100644 index 000000000000..d056263545b1 --- /dev/null +++ b/include/linux/platform_data/atmel.h @@ -0,0 +1,27 @@ +/* + * atmel platform data + * + * GPL v2 Only + */ + +#ifndef __ATMEL_NAND_H__ +#define __ATMEL_NAND_H__ + +#include <linux/mtd/nand.h> + + /* NAND / SmartMedia */ +struct atmel_nand_data { + int enable_pin; /* chip enable */ + int det_pin; /* card detect */ + int rdy_pin; /* ready/busy */ + u8 rdy_pin_active_low; /* rdy_pin value is inverted */ + u8 ale; /* address line number connected to ALE */ + u8 cle; /* address line number connected to CLE */ + u8 bus_width_16; /* buswidth is 16 bit */ + u8 ecc_mode; /* ecc mode */ + u8 on_flash_bbt; /* bbt on flash */ + struct mtd_partition *parts; + unsigned int num_parts; +}; + +#endif /* __ATMEL_NAND_H__ */ diff --git a/include/linux/platform_data/omap-abe-twl6040.h b/include/linux/platform_data/omap-abe-twl6040.h new file mode 100644 index 000000000000..5d298ac10fc2 --- /dev/null +++ b/include/linux/platform_data/omap-abe-twl6040.h @@ -0,0 +1,49 @@ +/** + * omap-abe-twl6040.h - ASoC machine driver OMAP4+ devices, header. + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef _OMAP_ABE_TWL6040_H_ +#define _OMAP_ABE_TWL6040_H_ + +/* To select if only one channel is connected in a stereo port */ +#define ABE_TWL6040_LEFT (1 << 0) +#define ABE_TWL6040_RIGHT (1 << 1) + +struct omap_abe_twl6040_data { + char *card_name; + /* Feature flags for connected audio pins */ + u8 has_hs; + u8 has_hf; + bool has_ep; + u8 has_aux; + u8 has_vibra; + bool has_dmic; + bool has_hsmic; + bool has_mainmic; + bool has_submic; + u8 has_afm; + /* Other features */ + bool jack_detection; /* board can detect jack events */ + int mclk_freq; /* MCLK frequency speed for twl6040 */ +}; + +#endif /* _OMAP_ABE_TWL6040_H_ */ diff --git a/include/linux/platform_data/omap4-keypad.h b/include/linux/platform_data/omap4-keypad.h new file mode 100644 index 000000000000..4eef5fb05a17 --- /dev/null +++ b/include/linux/platform_data/omap4-keypad.h @@ -0,0 +1,13 @@ +#ifndef __LINUX_INPUT_OMAP4_KEYPAD_H +#define __LINUX_INPUT_OMAP4_KEYPAD_H + +#include <linux/input/matrix_keypad.h> + +struct omap4_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; + + u8 rows; + u8 cols; +}; + +#endif /* __LINUX_INPUT_OMAP4_KEYPAD_H */ diff --git a/include/linux/platform_data/tegra_emc.h b/include/linux/platform_data/tegra_emc.h new file mode 100644 index 000000000000..df67505e98f8 --- /dev/null +++ b/include/linux/platform_data/tegra_emc.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2011 Google, Inc. + * + * Author: + * Colin Cross <ccross@android.com> + * Olof Johansson <olof@lixom.net> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __TEGRA_EMC_H_ +#define __TEGRA_EMC_H_ + +#define TEGRA_EMC_NUM_REGS 46 + +struct tegra_emc_table { + unsigned long rate; + u32 regs[TEGRA_EMC_NUM_REGS]; +}; + +struct tegra_emc_pdata { + int num_tables; + struct tegra_emc_table *tables; +}; + +#endif diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 1236d262b3e8..91f8286106ea 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -10,6 +10,8 @@ #define _LINUX_PM_DOMAIN_H #include <linux/device.h> +#include <linux/mutex.h> +#include <linux/pm.h> #include <linux/err.h> #include <linux/of.h> diff --git a/include/linux/poll.h b/include/linux/poll.h index cf40010ce0cd..48fe8bc398d1 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -32,21 +32,46 @@ struct poll_table_struct; */ typedef void (*poll_queue_proc)(struct file *, wait_queue_head_t *, struct poll_table_struct *); +/* + * Do not touch the structure directly, use the access functions + * poll_does_not_wait() and poll_requested_events() instead. + */ typedef struct poll_table_struct { - poll_queue_proc qproc; - unsigned long key; + poll_queue_proc _qproc; + unsigned long _key; } poll_table; static inline void poll_wait(struct file * filp, wait_queue_head_t * wait_address, poll_table *p) { - if (p && wait_address) - p->qproc(filp, wait_address, p); + if (p && p->_qproc && wait_address) + p->_qproc(filp, wait_address, p); +} + +/* + * Return true if it is guaranteed that poll will not wait. This is the case + * if the poll() of another file descriptor in the set got an event, so there + * is no need for waiting. + */ +static inline bool poll_does_not_wait(const poll_table *p) +{ + return p == NULL || p->_qproc == NULL; +} + +/* + * Return the set of events that the application wants to poll for. + * This is useful for drivers that need to know whether a DMA transfer has + * to be started implicitly on poll(). You typically only want to do that + * if the application is actually polling for POLLIN and/or POLLOUT. + */ +static inline unsigned long poll_requested_events(const poll_table *p) +{ + return p ? p->_key : ~0UL; } static inline void init_poll_funcptr(poll_table *pt, poll_queue_proc qproc) { - pt->qproc = qproc; - pt->key = ~0UL; /* all events enabled */ + pt->_qproc = qproc; + pt->_key = ~0UL; /* all events enabled */ } struct poll_table_entry { diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h index b7681102a4b9..11bad91c4433 100644 --- a/include/linux/posix_acl.h +++ b/include/linux/posix_acl.h @@ -8,6 +8,7 @@ #ifndef __LINUX_POSIX_ACL_H #define __LINUX_POSIX_ACL_H +#include <linux/bug.h> #include <linux/slab.h> #include <linux/rcupdate.h> diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index fa9b962aec12..c38c13db8832 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -13,10 +13,11 @@ #ifndef __LINUX_POWER_SUPPLY_H__ #define __LINUX_POWER_SUPPLY_H__ -#include <linux/device.h> #include <linux/workqueue.h> #include <linux/leds.h> +struct device; + /* * All voltages, currents, charges, energies, time and temperatures in uV, * µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise diff --git a/include/linux/prctl.h b/include/linux/prctl.h index a0413ac3abe8..e0cfec2490aa 100644 --- a/include/linux/prctl.h +++ b/include/linux/prctl.h @@ -121,4 +121,7 @@ #define PR_SET_PTRACER 0x59616d61 # define PR_SET_PTRACER_ANY ((unsigned long)-1) +#define PR_SET_CHILD_SUBREAPER 36 +#define PR_GET_CHILD_SUBREAPER 37 + #endif /* _LINUX_PRCTL_H */ diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index c2f1f6a5fcb8..5c719627c2aa 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -51,20 +51,6 @@ #define PTRACE_INTERRUPT 0x4207 #define PTRACE_LISTEN 0x4208 -/* flags in @data for PTRACE_SEIZE */ -#define PTRACE_SEIZE_DEVEL 0x80000000 /* temp flag for development */ - -/* options set using PTRACE_SETOPTIONS */ -#define PTRACE_O_TRACESYSGOOD 0x00000001 -#define PTRACE_O_TRACEFORK 0x00000002 -#define PTRACE_O_TRACEVFORK 0x00000004 -#define PTRACE_O_TRACECLONE 0x00000008 -#define PTRACE_O_TRACEEXEC 0x00000010 -#define PTRACE_O_TRACEVFORKDONE 0x00000020 -#define PTRACE_O_TRACEEXIT 0x00000040 - -#define PTRACE_O_MASK 0x0000007f - /* Wait extended result codes for the above trace options. */ #define PTRACE_EVENT_FORK 1 #define PTRACE_EVENT_VFORK 2 @@ -72,7 +58,19 @@ #define PTRACE_EVENT_EXEC 4 #define PTRACE_EVENT_VFORK_DONE 5 #define PTRACE_EVENT_EXIT 6 -#define PTRACE_EVENT_STOP 7 +/* Extended result codes which enabled by means other than options. */ +#define PTRACE_EVENT_STOP 128 + +/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */ +#define PTRACE_O_TRACESYSGOOD 1 +#define PTRACE_O_TRACEFORK (1 << PTRACE_EVENT_FORK) +#define PTRACE_O_TRACEVFORK (1 << PTRACE_EVENT_VFORK) +#define PTRACE_O_TRACECLONE (1 << PTRACE_EVENT_CLONE) +#define PTRACE_O_TRACEEXEC (1 << PTRACE_EVENT_EXEC) +#define PTRACE_O_TRACEVFORKDONE (1 << PTRACE_EVENT_VFORK_DONE) +#define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT) + +#define PTRACE_O_MASK 0x0000007f #include <asm/ptrace.h> @@ -88,13 +86,12 @@ #define PT_SEIZED 0x00010000 /* SEIZE used, enable new behavior */ #define PT_PTRACED 0x00000001 #define PT_DTRACE 0x00000002 /* delayed trace (used on m68k, i386) */ -#define PT_TRACESYSGOOD 0x00000004 -#define PT_PTRACE_CAP 0x00000008 /* ptracer can follow suid-exec */ +#define PT_PTRACE_CAP 0x00000004 /* ptracer can follow suid-exec */ +#define PT_OPT_FLAG_SHIFT 3 /* PT_TRACE_* event enable flags */ -#define PT_EVENT_FLAG_SHIFT 4 -#define PT_EVENT_FLAG(event) (1 << (PT_EVENT_FLAG_SHIFT + (event) - 1)) - +#define PT_EVENT_FLAG(event) (1 << (PT_OPT_FLAG_SHIFT + (event))) +#define PT_TRACESYSGOOD PT_EVENT_FLAG(0) #define PT_TRACE_FORK PT_EVENT_FLAG(PTRACE_EVENT_FORK) #define PT_TRACE_VFORK PT_EVENT_FLAG(PTRACE_EVENT_VFORK) #define PT_TRACE_CLONE PT_EVENT_FLAG(PTRACE_EVENT_CLONE) @@ -102,8 +99,6 @@ #define PT_TRACE_VFORK_DONE PT_EVENT_FLAG(PTRACE_EVENT_VFORK_DONE) #define PT_TRACE_EXIT PT_EVENT_FLAG(PTRACE_EVENT_EXIT) -#define PT_TRACE_MASK 0x000003f4 - /* single stepping state bits (used on ARM and PA-RISC) */ #define PT_SINGLESTEP_BIT 31 #define PT_SINGLESTEP (1<<PT_SINGLESTEP_BIT) @@ -113,6 +108,7 @@ #include <linux/compiler.h> /* For unlikely. */ #include <linux/sched.h> /* For struct task_struct. */ #include <linux/err.h> /* for IS_ERR_VALUE */ +#include <linux/bug.h> /* For BUG_ON. */ extern long arch_ptrace(struct task_struct *child, long request, @@ -199,9 +195,10 @@ static inline void ptrace_event(int event, unsigned long message) if (unlikely(ptrace_event_enabled(current, event))) { current->ptrace_message = message; ptrace_notify((event << 8) | SIGTRAP); - } else if (event == PTRACE_EVENT_EXEC && unlikely(current->ptrace)) { + } else if (event == PTRACE_EVENT_EXEC) { /* legacy EXEC report via SIGTRAP */ - send_sig(SIGTRAP, current, 0); + if ((current->ptrace & (PT_PTRACED|PT_SEIZED)) == PT_PTRACED) + send_sig(SIGTRAP, current, 0); } } diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h index 07e360b1b282..0d04cd69ab9b 100644 --- a/include/linux/radix-tree.h +++ b/include/linux/radix-tree.h @@ -2,6 +2,7 @@ * Copyright (C) 2001 Momchil Velikov * Portions Copyright (C) 2001 Christoph Hellwig * Copyright (C) 2006 Nick Piggin + * Copyright (C) 2012 Konstantin Khlebnikov * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -22,6 +23,7 @@ #include <linux/preempt.h> #include <linux/types.h> +#include <linux/bug.h> #include <linux/kernel.h> #include <linux/rcupdate.h> @@ -256,4 +258,199 @@ static inline void radix_tree_preload_end(void) preempt_enable(); } +/** + * struct radix_tree_iter - radix tree iterator state + * + * @index: index of current slot + * @next_index: next-to-last index for this chunk + * @tags: bit-mask for tag-iterating + * + * This radix tree iterator works in terms of "chunks" of slots. A chunk is a + * subinterval of slots contained within one radix tree leaf node. It is + * described by a pointer to its first slot and a struct radix_tree_iter + * which holds the chunk's position in the tree and its size. For tagged + * iteration radix_tree_iter also holds the slots' bit-mask for one chosen + * radix tree tag. + */ +struct radix_tree_iter { + unsigned long index; + unsigned long next_index; + unsigned long tags; +}; + +#define RADIX_TREE_ITER_TAG_MASK 0x00FF /* tag index in lower byte */ +#define RADIX_TREE_ITER_TAGGED 0x0100 /* lookup tagged slots */ +#define RADIX_TREE_ITER_CONTIG 0x0200 /* stop at first hole */ + +/** + * radix_tree_iter_init - initialize radix tree iterator + * + * @iter: pointer to iterator state + * @start: iteration starting index + * Returns: NULL + */ +static __always_inline void ** +radix_tree_iter_init(struct radix_tree_iter *iter, unsigned long start) +{ + /* + * Leave iter->tags uninitialized. radix_tree_next_chunk() will fill it + * in the case of a successful tagged chunk lookup. If the lookup was + * unsuccessful or non-tagged then nobody cares about ->tags. + * + * Set index to zero to bypass next_index overflow protection. + * See the comment in radix_tree_next_chunk() for details. + */ + iter->index = 0; + iter->next_index = start; + return NULL; +} + +/** + * radix_tree_next_chunk - find next chunk of slots for iteration + * + * @root: radix tree root + * @iter: iterator state + * @flags: RADIX_TREE_ITER_* flags and tag index + * Returns: pointer to chunk first slot, or NULL if there no more left + * + * This function looks up the next chunk in the radix tree starting from + * @iter->next_index. It returns a pointer to the chunk's first slot. + * Also it fills @iter with data about chunk: position in the tree (index), + * its end (next_index), and constructs a bit mask for tagged iterating (tags). + */ +void **radix_tree_next_chunk(struct radix_tree_root *root, + struct radix_tree_iter *iter, unsigned flags); + +/** + * radix_tree_chunk_size - get current chunk size + * + * @iter: pointer to radix tree iterator + * Returns: current chunk size + */ +static __always_inline unsigned +radix_tree_chunk_size(struct radix_tree_iter *iter) +{ + return iter->next_index - iter->index; +} + +/** + * radix_tree_next_slot - find next slot in chunk + * + * @slot: pointer to current slot + * @iter: pointer to interator state + * @flags: RADIX_TREE_ITER_*, should be constant + * Returns: pointer to next slot, or NULL if there no more left + * + * This function updates @iter->index in the case of a successful lookup. + * For tagged lookup it also eats @iter->tags. + */ +static __always_inline void ** +radix_tree_next_slot(void **slot, struct radix_tree_iter *iter, unsigned flags) +{ + if (flags & RADIX_TREE_ITER_TAGGED) { + iter->tags >>= 1; + if (likely(iter->tags & 1ul)) { + iter->index++; + return slot + 1; + } + if (!(flags & RADIX_TREE_ITER_CONTIG) && likely(iter->tags)) { + unsigned offset = __ffs(iter->tags); + + iter->tags >>= offset; + iter->index += offset + 1; + return slot + offset + 1; + } + } else { + unsigned size = radix_tree_chunk_size(iter) - 1; + + while (size--) { + slot++; + iter->index++; + if (likely(*slot)) + return slot; + if (flags & RADIX_TREE_ITER_CONTIG) + break; + } + } + return NULL; +} + +/** + * radix_tree_for_each_chunk - iterate over chunks + * + * @slot: the void** variable for pointer to chunk first slot + * @root: the struct radix_tree_root pointer + * @iter: the struct radix_tree_iter pointer + * @start: iteration starting index + * @flags: RADIX_TREE_ITER_* and tag index + * + * Locks can be released and reacquired between iterations. + */ +#define radix_tree_for_each_chunk(slot, root, iter, start, flags) \ + for (slot = radix_tree_iter_init(iter, start) ; \ + (slot = radix_tree_next_chunk(root, iter, flags)) ;) + +/** + * radix_tree_for_each_chunk_slot - iterate over slots in one chunk + * + * @slot: the void** variable, at the beginning points to chunk first slot + * @iter: the struct radix_tree_iter pointer + * @flags: RADIX_TREE_ITER_*, should be constant + * + * This macro is designed to be nested inside radix_tree_for_each_chunk(). + * @slot points to the radix tree slot, @iter->index contains its index. + */ +#define radix_tree_for_each_chunk_slot(slot, iter, flags) \ + for (; slot ; slot = radix_tree_next_slot(slot, iter, flags)) + +/** + * radix_tree_for_each_slot - iterate over non-empty slots + * + * @slot: the void** variable for pointer to slot + * @root: the struct radix_tree_root pointer + * @iter: the struct radix_tree_iter pointer + * @start: iteration starting index + * + * @slot points to radix tree slot, @iter->index contains its index. + */ +#define radix_tree_for_each_slot(slot, root, iter, start) \ + for (slot = radix_tree_iter_init(iter, start) ; \ + slot || (slot = radix_tree_next_chunk(root, iter, 0)) ; \ + slot = radix_tree_next_slot(slot, iter, 0)) + +/** + * radix_tree_for_each_contig - iterate over contiguous slots + * + * @slot: the void** variable for pointer to slot + * @root: the struct radix_tree_root pointer + * @iter: the struct radix_tree_iter pointer + * @start: iteration starting index + * + * @slot points to radix tree slot, @iter->index contains its index. + */ +#define radix_tree_for_each_contig(slot, root, iter, start) \ + for (slot = radix_tree_iter_init(iter, start) ; \ + slot || (slot = radix_tree_next_chunk(root, iter, \ + RADIX_TREE_ITER_CONTIG)) ; \ + slot = radix_tree_next_slot(slot, iter, \ + RADIX_TREE_ITER_CONTIG)) + +/** + * radix_tree_for_each_tagged - iterate over tagged slots + * + * @slot: the void** variable for pointer to slot + * @root: the struct radix_tree_root pointer + * @iter: the struct radix_tree_iter pointer + * @start: iteration starting index + * @tag: tag index + * + * @slot points to radix tree slot, @iter->index contains its index. + */ +#define radix_tree_for_each_tagged(slot, root, iter, start, tag) \ + for (slot = radix_tree_iter_init(iter, start) ; \ + slot || (slot = radix_tree_next_chunk(root, iter, \ + RADIX_TREE_ITER_TAGGED | tag)) ; \ + slot = radix_tree_next_slot(slot, iter, \ + RADIX_TREE_ITER_TAGGED)) + #endif /* _LINUX_RADIX_TREE_H */ diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h index 6f6df86f1ae5..8c0a3adc5df5 100644 --- a/include/linux/raid/md_p.h +++ b/include/linux/raid/md_p.h @@ -281,6 +281,10 @@ struct mdp_superblock_1 { * active device with same 'role'. * 'recovery_offset' is also set. */ -#define MD_FEATURE_ALL (1|2|4|8|16) +#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \ + |MD_FEATURE_RECOVERY_OFFSET \ + |MD_FEATURE_RESHAPE_ACTIVE \ + |MD_FEATURE_BAD_BLOCKS \ + |MD_FEATURE_REPLACEMENT) #endif diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 937217425c47..20fb776a1d4a 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -42,6 +42,7 @@ #include <linux/lockdep.h> #include <linux/completion.h> #include <linux/debugobjects.h> +#include <linux/bug.h> #include <linux/compiler.h> #ifdef CONFIG_RCU_TORTURE_TEST @@ -418,7 +419,7 @@ extern int rcu_my_thread_group_empty(void); */ #define rcu_lockdep_assert(c, s) \ do { \ - static bool __warned; \ + static bool __section(.data.unlikely) __warned; \ if (debug_lockdep_rcu_enabled() && !__warned && !(c)) { \ __warned = true; \ lockdep_rcu_suspicious(__FILE__, __LINE__, s); \ diff --git a/include/linux/regmap.h b/include/linux/regmap.h index eb93921cdd30..a90abb6bfa64 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -13,12 +13,13 @@ * published by the Free Software Foundation. */ -#include <linux/device.h> #include <linux/list.h> struct module; +struct device; struct i2c_client; struct spi_device; +struct regmap; /* An enum of all the supported cache types */ enum regcache_type { @@ -40,10 +41,13 @@ struct reg_default { unsigned int def; }; +#ifdef CONFIG_REGMAP + /** * Configuration for the register map of a device. * * @reg_bits: Number of bits in a register address, mandatory. + * @pad_bits: Number of bits of padding between register and value. * @val_bits: Number of bits in a register value, mandatory. * * @writeable_reg: Optional callback returning true if the register @@ -74,6 +78,7 @@ struct reg_default { */ struct regmap_config { int reg_bits; + int pad_bits; int val_bits; bool (*writeable_reg)(struct device *dev, unsigned int reg); @@ -127,12 +132,22 @@ struct regmap *regmap_init_i2c(struct i2c_client *i2c, struct regmap *regmap_init_spi(struct spi_device *dev, const struct regmap_config *config); +struct regmap *devm_regmap_init(struct device *dev, + const struct regmap_bus *bus, + const struct regmap_config *config); +struct regmap *devm_regmap_init_i2c(struct i2c_client *i2c, + const struct regmap_config *config); +struct regmap *devm_regmap_init_spi(struct spi_device *dev, + const struct regmap_config *config); + void regmap_exit(struct regmap *map); int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config); int regmap_write(struct regmap *map, unsigned int reg, unsigned int val); int regmap_raw_write(struct regmap *map, unsigned int reg, const void *val, size_t val_len); +int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val, + size_t val_count); int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val); int regmap_raw_read(struct regmap *map, unsigned int reg, void *val, size_t val_len); @@ -143,12 +158,18 @@ int regmap_update_bits(struct regmap *map, unsigned int reg, int regmap_update_bits_check(struct regmap *map, unsigned int reg, unsigned int mask, unsigned int val, bool *change); +int regmap_get_val_bytes(struct regmap *map); int regcache_sync(struct regmap *map); +int regcache_sync_region(struct regmap *map, unsigned int min, + unsigned int max); void regcache_cache_only(struct regmap *map, bool enable); void regcache_cache_bypass(struct regmap *map, bool enable); void regcache_mark_dirty(struct regmap *map); +int regmap_register_patch(struct regmap *map, const struct reg_default *regs, + int num_regs); + /** * Description of an IRQ for the generic regmap irq_chip. * @@ -197,4 +218,115 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data); int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data); +#else + +/* + * These stubs should only ever be called by generic code which has + * regmap based facilities, if they ever get called at runtime + * something is going wrong and something probably needs to select + * REGMAP. + */ + +static inline int regmap_write(struct regmap *map, unsigned int reg, + unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_raw_write(struct regmap *map, unsigned int reg, + const void *val, size_t val_len) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_bulk_write(struct regmap *map, unsigned int reg, + const void *val, size_t val_count) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_read(struct regmap *map, unsigned int reg, + unsigned int *val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_raw_read(struct regmap *map, unsigned int reg, + void *val, size_t val_len) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_bulk_read(struct regmap *map, unsigned int reg, + void *val, size_t val_count) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_update_bits(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_update_bits_check(struct regmap *map, + unsigned int reg, + unsigned int mask, unsigned int val, + bool *change) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_get_val_bytes(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regcache_sync(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regcache_sync_region(struct regmap *map, unsigned int min, + unsigned int max) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline void regcache_cache_only(struct regmap *map, bool enable) +{ + WARN_ONCE(1, "regmap API is disabled"); +} + +static inline void regcache_cache_bypass(struct regmap *map, bool enable) +{ + WARN_ONCE(1, "regmap API is disabled"); +} + +static inline void regcache_mark_dirty(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); +} + +static inline int regmap_register_patch(struct regmap *map, + const struct reg_default *regs, + int num_regs) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +#endif + #endif diff --git a/include/linux/regset.h b/include/linux/regset.h index 686f37327a49..8e0c9febf495 100644 --- a/include/linux/regset.h +++ b/include/linux/regset.h @@ -15,6 +15,7 @@ #include <linux/compiler.h> #include <linux/types.h> +#include <linux/bug.h> #include <linux/uaccess.h> struct task_struct; struct user_regset; diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h index 76579f964a29..7bd73bbdfd1b 100644 --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -26,7 +26,26 @@ enum ab8500_regulator_id { AB8500_NUM_REGULATORS, }; -/* AB8500 register initialization */ +/* AB9450 regulators */ +enum ab9540_regulator_id { + AB9540_LDO_AUX1, + AB9540_LDO_AUX2, + AB9540_LDO_AUX3, + AB9540_LDO_AUX4, + AB9540_LDO_INTCORE, + AB9540_LDO_TVOUT, + AB9540_LDO_USB, + AB9540_LDO_AUDIO, + AB9540_LDO_ANAMIC1, + AB9540_LDO_ANAMIC2, + AB9540_LDO_DMIC, + AB9540_LDO_ANA, + AB9540_SYSCLKREQ_2, + AB9540_SYSCLKREQ_4, + AB9540_NUM_REGULATORS, +}; + +/* AB8500 and AB9540 register initialization */ struct ab8500_regulator_reg_init { int id; u8 value; @@ -71,4 +90,53 @@ enum ab8500_regulator_reg { AB8500_NUM_REGULATOR_REGISTERS, }; + +/* AB9540 registers */ +enum ab9540_regulator_reg { + AB9540_REGUREQUESTCTRL1, + AB9540_REGUREQUESTCTRL2, + AB9540_REGUREQUESTCTRL3, + AB9540_REGUREQUESTCTRL4, + AB9540_REGUSYSCLKREQ1HPVALID1, + AB9540_REGUSYSCLKREQ1HPVALID2, + AB9540_REGUHWHPREQ1VALID1, + AB9540_REGUHWHPREQ1VALID2, + AB9540_REGUHWHPREQ2VALID1, + AB9540_REGUHWHPREQ2VALID2, + AB9540_REGUSWHPREQVALID1, + AB9540_REGUSWHPREQVALID2, + AB9540_REGUSYSCLKREQVALID1, + AB9540_REGUSYSCLKREQVALID2, + AB9540_REGUVAUX4REQVALID, + AB9540_REGUMISC1, + AB9540_VAUDIOSUPPLY, + AB9540_REGUCTRL1VAMIC, + AB9540_VSMPS1REGU, + AB9540_VSMPS2REGU, + AB9540_VSMPS3REGU, /* NOTE! PRCMU register */ + AB9540_VPLLVANAREGU, + AB9540_EXTSUPPLYREGU, + AB9540_VAUX12REGU, + AB9540_VRF1VAUX3REGU, + AB9540_VSMPS1SEL1, + AB9540_VSMPS1SEL2, + AB9540_VSMPS1SEL3, + AB9540_VSMPS2SEL1, + AB9540_VSMPS2SEL2, + AB9540_VSMPS2SEL3, + AB9540_VSMPS3SEL1, /* NOTE! PRCMU register */ + AB9540_VSMPS3SEL2, /* NOTE! PRCMU register */ + AB9540_VAUX1SEL, + AB9540_VAUX2SEL, + AB9540_VRF1VAUX3SEL, + AB9540_REGUCTRL2SPARE, + AB9540_VAUX4REQCTRL, + AB9540_VAUX4REGU, + AB9540_VAUX4SEL, + AB9540_REGUCTRLDISCH, + AB9540_REGUCTRLDISCH2, + AB9540_REGUCTRLDISCH3, + AB9540_NUM_REGULATOR_REGISTERS, +}; + #endif diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h deleted file mode 100644 index a6d014005d49..000000000000 --- a/include/linux/regulator/bq24022.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater) - * 1-Cell Li-Ion Charger connected via GPIOs. - * - * Copyright (c) 2008 Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -struct regulator_init_data; - -/** - * bq24022_mach_info - platform data for bq24022 - * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging - * @gpio_iset2: GPIO line connected to the ISET2 pin, used to limit charging current to 100 mA / 500 mA - */ -struct bq24022_mach_info { - int gpio_nce; - int gpio_iset2; - struct regulator_init_data *init_data; -}; diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index b6c8d717c7ec..4ed1b30ac5fc 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -35,7 +35,8 @@ #ifndef __LINUX_REGULATOR_CONSUMER_H_ #define __LINUX_REGULATOR_CONSUMER_H_ -#include <linux/device.h> +struct device; +struct notifier_block; /* * Regulator operating modes. diff --git a/include/linux/relay.h b/include/linux/relay.h index a822fd71fd64..91cacc34c159 100644 --- a/include/linux/relay.h +++ b/include/linux/relay.h @@ -15,6 +15,7 @@ #include <linux/timer.h> #include <linux/wait.h> #include <linux/list.h> +#include <linux/bug.h> #include <linux/fs.h> #include <linux/poll.h> #include <linux/kref.h> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h new file mode 100644 index 000000000000..f1ffabb978d3 --- /dev/null +++ b/include/linux/remoteproc.h @@ -0,0 +1,478 @@ +/* + * Remote Processor Framework + * + * Copyright(c) 2011 Texas Instruments, Inc. + * Copyright(c) 2011 Google, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Texas Instruments nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef REMOTEPROC_H +#define REMOTEPROC_H + +#include <linux/types.h> +#include <linux/kref.h> +#include <linux/klist.h> +#include <linux/mutex.h> +#include <linux/virtio.h> +#include <linux/completion.h> +#include <linux/idr.h> + +/** + * struct resource_table - firmware resource table header + * @ver: version number + * @num: number of resource entries + * @reserved: reserved (must be zero) + * @offset: array of offsets pointing at the various resource entries + * + * A resource table is essentially a list of system resources required + * by the remote processor. It may also include configuration entries. + * If needed, the remote processor firmware should contain this table + * as a dedicated ".resource_table" ELF section. + * + * Some resources entries are mere announcements, where the host is informed + * of specific remoteproc configuration. Other entries require the host to + * do something (e.g. allocate a system resource). Sometimes a negotiation + * is expected, where the firmware requests a resource, and once allocated, + * the host should provide back its details (e.g. address of an allocated + * memory region). + * + * The header of the resource table, as expressed by this structure, + * contains a version number (should we need to change this format in the + * future), the number of available resource entries, and their offsets + * in the table. + * + * Immediately following this header are the resource entries themselves, + * each of which begins with a resource entry header (as described below). + */ +struct resource_table { + u32 ver; + u32 num; + u32 reserved[2]; + u32 offset[0]; +} __packed; + +/** + * struct fw_rsc_hdr - firmware resource entry header + * @type: resource type + * @data: resource data + * + * Every resource entry begins with a 'struct fw_rsc_hdr' header providing + * its @type. The content of the entry itself will immediately follow + * this header, and it should be parsed according to the resource type. + */ +struct fw_rsc_hdr { + u32 type; + u8 data[0]; +} __packed; + +/** + * enum fw_resource_type - types of resource entries + * + * @RSC_CARVEOUT: request for allocation of a physically contiguous + * memory region. + * @RSC_DEVMEM: request to iommu_map a memory-based peripheral. + * @RSC_TRACE: announces the availability of a trace buffer into which + * the remote processor will be writing logs. + * @RSC_VDEV: declare support for a virtio device, and serve as its + * virtio header. + * @RSC_LAST: just keep this one at the end + * + * For more details regarding a specific resource type, please see its + * dedicated structure below. + * + * Please note that these values are used as indices to the rproc_handle_rsc + * lookup table, so please keep them sane. Moreover, @RSC_LAST is used to + * check the validity of an index before the lookup table is accessed, so + * please update it as needed. + */ +enum fw_resource_type { + RSC_CARVEOUT = 0, + RSC_DEVMEM = 1, + RSC_TRACE = 2, + RSC_VDEV = 3, + RSC_LAST = 4, +}; + +#define FW_RSC_ADDR_ANY (0xFFFFFFFFFFFFFFFF) + +/** + * struct fw_rsc_carveout - physically contiguous memory request + * @da: device address + * @pa: physical address + * @len: length (in bytes) + * @flags: iommu protection flags + * @reserved: reserved (must be zero) + * @name: human-readable name of the requested memory region + * + * This resource entry requests the host to allocate a physically contiguous + * memory region. + * + * These request entries should precede other firmware resource entries, + * as other entries might request placing other data objects inside + * these memory regions (e.g. data/code segments, trace resource entries, ...). + * + * Allocating memory this way helps utilizing the reserved physical memory + * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries + * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB + * pressure is important; it may have a substantial impact on performance. + * + * If the firmware is compiled with static addresses, then @da should specify + * the expected device address of this memory region. If @da is set to + * FW_RSC_ADDR_ANY, then the host will dynamically allocate it, and then + * overwrite @da with the dynamically allocated address. + * + * We will always use @da to negotiate the device addresses, even if it + * isn't using an iommu. In that case, though, it will obviously contain + * physical addresses. + * + * Some remote processors needs to know the allocated physical address + * even if they do use an iommu. This is needed, e.g., if they control + * hardware accelerators which access the physical memory directly (this + * is the case with OMAP4 for instance). In that case, the host will + * overwrite @pa with the dynamically allocated physical address. + * Generally we don't want to expose physical addresses if we don't have to + * (remote processors are generally _not_ trusted), so we might want to + * change this to happen _only_ when explicitly required by the hardware. + * + * @flags is used to provide IOMMU protection flags, and @name should + * (optionally) contain a human readable name of this carveout region + * (mainly for debugging purposes). + */ +struct fw_rsc_carveout { + u32 da; + u32 pa; + u32 len; + u32 flags; + u32 reserved; + u8 name[32]; +} __packed; + +/** + * struct fw_rsc_devmem - iommu mapping request + * @da: device address + * @pa: physical address + * @len: length (in bytes) + * @flags: iommu protection flags + * @reserved: reserved (must be zero) + * @name: human-readable name of the requested region to be mapped + * + * This resource entry requests the host to iommu map a physically contiguous + * memory region. This is needed in case the remote processor requires + * access to certain memory-based peripherals; _never_ use it to access + * regular memory. + * + * This is obviously only needed if the remote processor is accessing memory + * via an iommu. + * + * @da should specify the required device address, @pa should specify + * the physical address we want to map, @len should specify the size of + * the mapping and @flags is the IOMMU protection flags. As always, @name may + * (optionally) contain a human readable name of this mapping (mainly for + * debugging purposes). + * + * Note: at this point we just "trust" those devmem entries to contain valid + * physical addresses, but this isn't safe and will be changed: eventually we + * want remoteproc implementations to provide us ranges of physical addresses + * the firmware is allowed to request, and not allow firmwares to request + * access to physical addresses that are outside those ranges. + */ +struct fw_rsc_devmem { + u32 da; + u32 pa; + u32 len; + u32 flags; + u32 reserved; + u8 name[32]; +} __packed; + +/** + * struct fw_rsc_trace - trace buffer declaration + * @da: device address + * @len: length (in bytes) + * @reserved: reserved (must be zero) + * @name: human-readable name of the trace buffer + * + * This resource entry provides the host information about a trace buffer + * into which the remote processor will write log messages. + * + * @da specifies the device address of the buffer, @len specifies + * its size, and @name may contain a human readable name of the trace buffer. + * + * After booting the remote processor, the trace buffers are exposed to the + * user via debugfs entries (called trace0, trace1, etc..). + */ +struct fw_rsc_trace { + u32 da; + u32 len; + u32 reserved; + u8 name[32]; +} __packed; + +/** + * struct fw_rsc_vdev_vring - vring descriptor entry + * @da: device address + * @align: the alignment between the consumer and producer parts of the vring + * @num: num of buffers supported by this vring (must be power of two) + * @notifyid is a unique rproc-wide notify index for this vring. This notify + * index is used when kicking a remote processor, to let it know that this + * vring is triggered. + * @reserved: reserved (must be zero) + * + * This descriptor is not a resource entry by itself; it is part of the + * vdev resource type (see below). + * + * Note that @da should either contain the device address where + * the remote processor is expecting the vring, or indicate that + * dynamically allocation of the vring's device address is supported. + */ +struct fw_rsc_vdev_vring { + u32 da; + u32 align; + u32 num; + u32 notifyid; + u32 reserved; +} __packed; + +/** + * struct fw_rsc_vdev - virtio device header + * @id: virtio device id (as in virtio_ids.h) + * @notifyid is a unique rproc-wide notify index for this vdev. This notify + * index is used when kicking a remote processor, to let it know that the + * status/features of this vdev have changes. + * @dfeatures specifies the virtio device features supported by the firmware + * @gfeatures is a place holder used by the host to write back the + * negotiated features that are supported by both sides. + * @config_len is the size of the virtio config space of this vdev. The config + * space lies in the resource table immediate after this vdev header. + * @status is a place holder where the host will indicate its virtio progress. + * @num_of_vrings indicates how many vrings are described in this vdev header + * @reserved: reserved (must be zero) + * @vring is an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'. + * + * This resource is a virtio device header: it provides information about + * the vdev, and is then used by the host and its peer remote processors + * to negotiate and share certain virtio properties. + * + * By providing this resource entry, the firmware essentially asks remoteproc + * to statically allocate a vdev upon registration of the rproc (dynamic vdev + * allocation is not yet supported). + * + * Note: unlike virtualization systems, the term 'host' here means + * the Linux side which is running remoteproc to control the remote + * processors. We use the name 'gfeatures' to comply with virtio's terms, + * though there isn't really any virtualized guest OS here: it's the host + * which is responsible for negotiating the final features. + * Yeah, it's a bit confusing. + * + * Note: immediately following this structure is the virtio config space for + * this vdev (which is specific to the vdev; for more info, read the virtio + * spec). the size of the config space is specified by @config_len. + */ +struct fw_rsc_vdev { + u32 id; + u32 notifyid; + u32 dfeatures; + u32 gfeatures; + u32 config_len; + u8 status; + u8 num_of_vrings; + u8 reserved[2]; + struct fw_rsc_vdev_vring vring[0]; +} __packed; + +/** + * struct rproc_mem_entry - memory entry descriptor + * @va: virtual address + * @dma: dma address + * @len: length, in bytes + * @da: device address + * @priv: associated data + * @node: list node + */ +struct rproc_mem_entry { + void *va; + dma_addr_t dma; + int len; + u32 da; + void *priv; + struct list_head node; +}; + +struct rproc; + +/** + * struct rproc_ops - platform-specific device handlers + * @start: power on the device and boot it + * @stop: power off the device + * @kick: kick a virtqueue (virtqueue id given as a parameter) + */ +struct rproc_ops { + int (*start)(struct rproc *rproc); + int (*stop)(struct rproc *rproc); + void (*kick)(struct rproc *rproc, int vqid); +}; + +/** + * enum rproc_state - remote processor states + * @RPROC_OFFLINE: device is powered off + * @RPROC_SUSPENDED: device is suspended; needs to be woken up to receive + * a message. + * @RPROC_RUNNING: device is up and running + * @RPROC_CRASHED: device has crashed; need to start recovery + * @RPROC_LAST: just keep this one at the end + * + * Please note that the values of these states are used as indices + * to rproc_state_string, a state-to-name lookup table, + * so please keep the two synchronized. @RPROC_LAST is used to check + * the validity of an index before the lookup table is accessed, so + * please update it as needed too. + */ +enum rproc_state { + RPROC_OFFLINE = 0, + RPROC_SUSPENDED = 1, + RPROC_RUNNING = 2, + RPROC_CRASHED = 3, + RPROC_LAST = 4, +}; + +/** + * struct rproc - represents a physical remote processor device + * @node: klist node of this rproc object + * @domain: iommu domain + * @name: human readable name of the rproc + * @firmware: name of firmware file to be loaded + * @priv: private data which belongs to the platform-specific rproc module + * @ops: platform-specific start/stop rproc handlers + * @dev: underlying device + * @refcount: refcount of users that have a valid pointer to this rproc + * @power: refcount of users who need this rproc powered up + * @state: state of the device + * @lock: lock which protects concurrent manipulations of the rproc + * @dbg_dir: debugfs directory of this rproc device + * @traces: list of trace buffers + * @num_traces: number of trace buffers + * @carveouts: list of physically contiguous memory allocations + * @mappings: list of iommu mappings we initiated, needed on shutdown + * @firmware_loading_complete: marks e/o asynchronous firmware loading + * @bootaddr: address of first instruction to boot rproc with (optional) + * @rvdevs: list of remote virtio devices + * @notifyids: idr for dynamically assigning rproc-wide unique notify ids + */ +struct rproc { + struct klist_node node; + struct iommu_domain *domain; + const char *name; + const char *firmware; + void *priv; + const struct rproc_ops *ops; + struct device *dev; + struct kref refcount; + atomic_t power; + unsigned int state; + struct mutex lock; + struct dentry *dbg_dir; + struct list_head traces; + int num_traces; + struct list_head carveouts; + struct list_head mappings; + struct completion firmware_loading_complete; + u32 bootaddr; + struct list_head rvdevs; + struct idr notifyids; +}; + +/* we currently support only two vrings per rvdev */ +#define RVDEV_NUM_VRINGS 2 + +/** + * struct rproc_vring - remoteproc vring state + * @va: virtual address + * @dma: dma address + * @len: length, in bytes + * @da: device address + * @align: vring alignment + * @notifyid: rproc-specific unique vring index + * @rvdev: remote vdev + * @vq: the virtqueue of this vring + */ +struct rproc_vring { + void *va; + dma_addr_t dma; + int len; + u32 da; + u32 align; + int notifyid; + struct rproc_vdev *rvdev; + struct virtqueue *vq; +}; + +/** + * struct rproc_vdev - remoteproc state for a supported virtio device + * @node: list node + * @rproc: the rproc handle + * @vdev: the virio device + * @vring: the vrings for this vdev + * @dfeatures: virtio device features + * @gfeatures: virtio guest features + */ +struct rproc_vdev { + struct list_head node; + struct rproc *rproc; + struct virtio_device vdev; + struct rproc_vring vring[RVDEV_NUM_VRINGS]; + unsigned long dfeatures; + unsigned long gfeatures; +}; + +struct rproc *rproc_get_by_name(const char *name); +void rproc_put(struct rproc *rproc); + +struct rproc *rproc_alloc(struct device *dev, const char *name, + const struct rproc_ops *ops, + const char *firmware, int len); +void rproc_free(struct rproc *rproc); +int rproc_register(struct rproc *rproc); +int rproc_unregister(struct rproc *rproc); + +int rproc_boot(struct rproc *rproc); +void rproc_shutdown(struct rproc *rproc); + +static inline struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev) +{ + return container_of(vdev, struct rproc_vdev, vdev); +} + +static inline struct rproc *vdev_to_rproc(struct virtio_device *vdev) +{ + struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); + + return rvdev->rproc; +} + +#endif /* REMOTEPROC_H */ diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index c6c608482cba..6fdf02737e9d 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -117,10 +117,10 @@ enum rfkill_user_states { #include <linux/kernel.h> #include <linux/list.h> #include <linux/mutex.h> -#include <linux/device.h> #include <linux/leds.h> #include <linux/err.h> +struct device; /* this is opaque */ struct rfkill; diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h index 229b3ca23134..7f07470e1ed9 100644 --- a/include/linux/rio_drv.h +++ b/include/linux/rio_drv.h @@ -17,7 +17,6 @@ #include <linux/ioport.h> #include <linux/list.h> #include <linux/errno.h> -#include <linux/device.h> #include <linux/string.h> #include <linux/rio.h> diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h new file mode 100644 index 000000000000..a8e50e44203c --- /dev/null +++ b/include/linux/rpmsg.h @@ -0,0 +1,326 @@ +/* + * Remote processor messaging + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Texas Instruments nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _LINUX_RPMSG_H +#define _LINUX_RPMSG_H + +#include <linux/types.h> +#include <linux/device.h> +#include <linux/mod_devicetable.h> + +/* The feature bitmap for virtio rpmsg */ +#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */ + +/** + * struct rpmsg_hdr - common header for all rpmsg messages + * @src: source address + * @dst: destination address + * @reserved: reserved for future use + * @len: length of payload (in bytes) + * @flags: message flags + * @data: @len bytes of message payload data + * + * Every message sent(/received) on the rpmsg bus begins with this header. + */ +struct rpmsg_hdr { + u32 src; + u32 dst; + u32 reserved; + u16 len; + u16 flags; + u8 data[0]; +} __packed; + +/** + * struct rpmsg_ns_msg - dynamic name service announcement message + * @name: name of remote service that is published + * @addr: address of remote service that is published + * @flags: indicates whether service is created or destroyed + * + * This message is sent across to publish a new service, or announce + * about its removal. When we receive these messages, an appropriate + * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe() + * or ->remove() handler of the appropriate rpmsg driver will be invoked + * (if/as-soon-as one is registered). + */ +struct rpmsg_ns_msg { + char name[RPMSG_NAME_SIZE]; + u32 addr; + u32 flags; +} __packed; + +/** + * enum rpmsg_ns_flags - dynamic name service announcement flags + * + * @RPMSG_NS_CREATE: a new remote service was just created + * @RPMSG_NS_DESTROY: a known remote service was just destroyed + */ +enum rpmsg_ns_flags { + RPMSG_NS_CREATE = 0, + RPMSG_NS_DESTROY = 1, +}; + +#define RPMSG_ADDR_ANY 0xFFFFFFFF + +struct virtproc_info; + +/** + * rpmsg_channel - devices that belong to the rpmsg bus are called channels + * @vrp: the remote processor this channel belongs to + * @dev: the device struct + * @id: device id (used to match between rpmsg drivers and devices) + * @src: local address + * @dst: destination address + * @ept: the rpmsg endpoint of this channel + * @announce: if set, rpmsg will announce the creation/removal of this channel + */ +struct rpmsg_channel { + struct virtproc_info *vrp; + struct device dev; + struct rpmsg_device_id id; + u32 src; + u32 dst; + struct rpmsg_endpoint *ept; + bool announce; +}; + +typedef void (*rpmsg_rx_cb_t)(struct rpmsg_channel *, void *, int, void *, u32); + +/** + * struct rpmsg_endpoint - binds a local rpmsg address to its user + * @rpdev: rpmsg channel device + * @cb: rx callback handler + * @addr: local rpmsg address + * @priv: private data for the driver's use + * + * In essence, an rpmsg endpoint represents a listener on the rpmsg bus, as + * it binds an rpmsg address with an rx callback handler. + * + * Simple rpmsg drivers shouldn't use this struct directly, because + * things just work: every rpmsg driver provides an rx callback upon + * registering to the bus, and that callback is then bound to its rpmsg + * address when the driver is probed. When relevant inbound messages arrive + * (i.e. messages which their dst address equals to the src address of + * the rpmsg channel), the driver's handler is invoked to process it. + * + * More complicated drivers though, that do need to allocate additional rpmsg + * addresses, and bind them to different rx callbacks, must explicitly + * create additional endpoints by themselves (see rpmsg_create_ept()). + */ +struct rpmsg_endpoint { + struct rpmsg_channel *rpdev; + rpmsg_rx_cb_t cb; + u32 addr; + void *priv; +}; + +/** + * struct rpmsg_driver - rpmsg driver struct + * @drv: underlying device driver + * @id_table: rpmsg ids serviced by this driver + * @probe: invoked when a matching rpmsg channel (i.e. device) is found + * @remove: invoked when the rpmsg channel is removed + * @callback: invoked when an inbound message is received on the channel + */ +struct rpmsg_driver { + struct device_driver drv; + const struct rpmsg_device_id *id_table; + int (*probe)(struct rpmsg_channel *dev); + void (*remove)(struct rpmsg_channel *dev); + void (*callback)(struct rpmsg_channel *, void *, int, void *, u32); +}; + +int register_rpmsg_device(struct rpmsg_channel *dev); +void unregister_rpmsg_device(struct rpmsg_channel *dev); +int register_rpmsg_driver(struct rpmsg_driver *drv); +void unregister_rpmsg_driver(struct rpmsg_driver *drv); +void rpmsg_destroy_ept(struct rpmsg_endpoint *); +struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_channel *, + rpmsg_rx_cb_t cb, void *priv, u32 addr); +int +rpmsg_send_offchannel_raw(struct rpmsg_channel *, u32, u32, void *, int, bool); + +/** + * rpmsg_send() - send a message across to the remote processor + * @rpdev: the rpmsg channel + * @data: payload of message + * @len: length of payload + * + * This function sends @data of length @len on the @rpdev channel. + * The message will be sent to the remote processor which the @rpdev + * channel belongs to, using @rpdev's source and destination addresses. + * In case there are no TX buffers available, the function will block until + * one becomes available, or a timeout of 15 seconds elapses. When the latter + * happens, -ERESTARTSYS is returned. + * + * Can only be called from process context (for now). + * + * Returns 0 on success and an appropriate error value on failure. + */ +static inline int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int len) +{ + u32 src = rpdev->src, dst = rpdev->dst; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); +} + +/** + * rpmsg_sendto() - send a message across to the remote processor, specify dst + * @rpdev: the rpmsg channel + * @data: payload of message + * @len: length of payload + * @dst: destination address + * + * This function sends @data of length @len to the remote @dst address. + * The message will be sent to the remote processor which the @rpdev + * channel belongs to, using @rpdev's source address. + * In case there are no TX buffers available, the function will block until + * one becomes available, or a timeout of 15 seconds elapses. When the latter + * happens, -ERESTARTSYS is returned. + * + * Can only be called from process context (for now). + * + * Returns 0 on success and an appropriate error value on failure. + */ +static inline +int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst) +{ + u32 src = rpdev->src; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); +} + +/** + * rpmsg_send_offchannel() - send a message using explicit src/dst addresses + * @rpdev: the rpmsg channel + * @src: source address + * @dst: destination address + * @data: payload of message + * @len: length of payload + * + * This function sends @data of length @len to the remote @dst address, + * and uses @src as the source address. + * The message will be sent to the remote processor which the @rpdev + * channel belongs to. + * In case there are no TX buffers available, the function will block until + * one becomes available, or a timeout of 15 seconds elapses. When the latter + * happens, -ERESTARTSYS is returned. + * + * Can only be called from process context (for now). + * + * Returns 0 on success and an appropriate error value on failure. + */ +static inline +int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst, + void *data, int len) +{ + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); +} + +/** + * rpmsg_send() - send a message across to the remote processor + * @rpdev: the rpmsg channel + * @data: payload of message + * @len: length of payload + * + * This function sends @data of length @len on the @rpdev channel. + * The message will be sent to the remote processor which the @rpdev + * channel belongs to, using @rpdev's source and destination addresses. + * In case there are no TX buffers available, the function will immediately + * return -ENOMEM without waiting until one becomes available. + * + * Can only be called from process context (for now). + * + * Returns 0 on success and an appropriate error value on failure. + */ +static inline +int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len) +{ + u32 src = rpdev->src, dst = rpdev->dst; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); +} + +/** + * rpmsg_sendto() - send a message across to the remote processor, specify dst + * @rpdev: the rpmsg channel + * @data: payload of message + * @len: length of payload + * @dst: destination address + * + * This function sends @data of length @len to the remote @dst address. + * The message will be sent to the remote processor which the @rpdev + * channel belongs to, using @rpdev's source address. + * In case there are no TX buffers available, the function will immediately + * return -ENOMEM without waiting until one becomes available. + * + * Can only be called from process context (for now). + * + * Returns 0 on success and an appropriate error value on failure. + */ +static inline +int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst) +{ + u32 src = rpdev->src; + + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); +} + +/** + * rpmsg_send_offchannel() - send a message using explicit src/dst addresses + * @rpdev: the rpmsg channel + * @src: source address + * @dst: destination address + * @data: payload of message + * @len: length of payload + * + * This function sends @data of length @len to the remote @dst address, + * and uses @src as the source address. + * The message will be sent to the remote processor which the @rpdev + * channel belongs to. + * In case there are no TX buffers available, the function will immediately + * return -ENOMEM without waiting until one becomes available. + * + * Can only be called from process context (for now). + * + * Returns 0 on success and an appropriate error value on failure. + */ +static inline +int rpmsg_trysend_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst, + void *data, int len) +{ + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); +} + +#endif /* _LINUX_RPMSG_H */ diff --git a/include/linux/rtc.h b/include/linux/rtc.h index 93f4d035076b..fcabfb4873c8 100644 --- a/include/linux/rtc.h +++ b/include/linux/rtc.h @@ -202,7 +202,8 @@ struct rtc_device struct hrtimer pie_timer; /* sub second exp, so needs hrtimer */ int pie_enabled; struct work_struct irqwork; - + /* Some hardware can't support UIE mode */ + int uie_unsupported; #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL struct work_struct uie_task; diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h index 63d406554391..54bd7cd7ecbd 100644 --- a/include/linux/rwsem.h +++ b/include/linux/rwsem.h @@ -14,7 +14,6 @@ #include <linux/list.h> #include <linux/spinlock.h> -#include <asm/system.h> #include <linux/atomic.h> struct rw_semaphore; diff --git a/include/linux/sa11x0-dma.h b/include/linux/sa11x0-dma.h new file mode 100644 index 000000000000..65839a58b8e5 --- /dev/null +++ b/include/linux/sa11x0-dma.h @@ -0,0 +1,24 @@ +/* + * SA11x0 DMA Engine support + * + * Copyright (C) 2012 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_SA11X0_DMA_H +#define __LINUX_SA11X0_DMA_H + +struct dma_chan; + +#if defined(CONFIG_DMA_SA11X0) || defined(CONFIG_DMA_SA11X0_MODULE) +bool sa11x0_dma_filter_fn(struct dma_chan *, void *); +#else +static inline bool sa11x0_dma_filter_fn(struct dma_chan *c, void *d) +{ + return false; +} +#endif + +#endif diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index 9aaf5bfdad1a..ac9586dadfa5 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -1,10 +1,12 @@ #ifndef _LINUX_SCATTERLIST_H #define _LINUX_SCATTERLIST_H +#include <linux/string.h> +#include <linux/bug.h> +#include <linux/mm.h> + #include <asm/types.h> #include <asm/scatterlist.h> -#include <linux/mm.h> -#include <linux/string.h> #include <asm/io.h> struct sg_table { diff --git a/include/linux/sched.h b/include/linux/sched.h index 0c147a4260a5..81a173c0897d 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -63,7 +63,6 @@ struct sched_param { #include <linux/nodemask.h> #include <linux/mm_types.h> -#include <asm/system.h> #include <asm/page.h> #include <asm/ptrace.h> #include <asm/cputime.h> @@ -553,6 +552,18 @@ struct signal_struct { int group_stop_count; unsigned int flags; /* see SIGNAL_* flags below */ + /* + * PR_SET_CHILD_SUBREAPER marks a process, like a service + * manager, to re-parent orphan (double-forking) child processes + * to this process instead of 'init'. The service manager is + * able to receive SIGCHLD signals and is able to investigate + * the process until it calls wait(). All children of this + * process will inherit a flag if they should look for a + * child_subreaper process at exit. + */ + unsigned int is_child_subreaper:1; + unsigned int has_child_subreaper:1; + /* POSIX.1b Interval Timers */ struct list_head posix_timers; diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h index 44f1514b00ba..fc61854f6224 100644 --- a/include/linux/seq_file.h +++ b/include/linux/seq_file.h @@ -3,6 +3,7 @@ #include <linux/types.h> #include <linux/string.h> +#include <linux/bug.h> #include <linux/mutex.h> #include <linux/cpumask.h> #include <linux/nodemask.h> @@ -121,9 +122,12 @@ int single_release(struct inode *, struct file *); void *__seq_open_private(struct file *, const struct seq_operations *, int); int seq_open_private(struct file *, const struct seq_operations *, int); int seq_release_private(struct inode *, struct file *); +int seq_put_decimal_ull(struct seq_file *m, char delimiter, + unsigned long long num); +int seq_put_decimal_ll(struct seq_file *m, char delimiter, + long long num); #define SEQ_START_TOKEN ((void *)1) - /* * Helpers for iteration over list_head-s in seq_files */ diff --git a/include/linux/serial_pnx8xxx.h b/include/linux/serial_pnx8xxx.h index de6c19c7f340..79ad87b0be3e 100644 --- a/include/linux/serial_pnx8xxx.h +++ b/include/linux/serial_pnx8xxx.h @@ -20,7 +20,6 @@ #define _LINUX_SERIAL_PNX8XXX_H #include <linux/serial_core.h> -#include <linux/device.h> #define PNX8XXX_NR_PORTS 2 diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 54341d811685..0a9d8f2ac519 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -18,7 +18,8 @@ struct clk_mapping { struct kref ref; }; -struct clk_ops { + +struct sh_clk_ops { #ifdef CONFIG_SH_CLK_CPG_LEGACY void (*init)(struct clk *clk); #endif @@ -37,7 +38,7 @@ struct clk { unsigned short parent_num; /* choose between */ unsigned char src_shift; /* source clock field in the */ unsigned char src_width; /* configuration register */ - struct clk_ops *ops; + struct sh_clk_ops *ops; struct list_head children; struct list_head sibling; /* node for children */ diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h index b160645f5599..6aed0805927f 100644 --- a/include/linux/sh_intc.h +++ b/include/linux/sh_intc.h @@ -3,6 +3,23 @@ #include <linux/ioport.h> +#ifdef CONFIG_SUPERH +#define INTC_NR_IRQS 512 +#else +#define INTC_NR_IRQS 1024 +#endif + +/* + * Convert back and forth between INTEVT and IRQ values. + */ +#ifdef CONFIG_CPU_HAS_INTEVT +#define evt2irq(evt) (((evt) >> 5) - 16) +#define irq2evt(irq) (((irq) + 16) << 5) +#else +#define evt2irq(evt) (evt) +#define irq2evt(irq) (irq) +#endif + typedef unsigned char intc_enum; struct intc_vect { diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index a2b9953b582d..33370271b8b2 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -18,6 +18,7 @@ #include <linux/kmemcheck.h> #include <linux/compiler.h> #include <linux/time.h> +#include <linux/bug.h> #include <linux/cache.h> #include <linux/atomic.h> @@ -500,7 +501,6 @@ struct sk_buff { */ #include <linux/slab.h> -#include <asm/system.h> /* * skb might have a dst pointer attached, refcounted or not. @@ -1244,7 +1244,7 @@ static inline void skb_fill_page_desc(struct sk_buff *skb, int i, } extern void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, - int off, int size); + int off, int size, unsigned int truesize); #define SKB_PAGE_ASSERT(skb) BUG_ON(skb_shinfo(skb)->nr_frags) #define SKB_FRAG_ASSERT(skb) BUG_ON(skb_has_frag_list(skb)) diff --git a/include/linux/slab.h b/include/linux/slab.h index 573c809c33d9..a595dce6b0c7 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -190,7 +190,7 @@ size_t ksize(const void *); #endif /** - * kcalloc - allocate memory for an array. The memory is set to zero. + * kmalloc_array - allocate memory for an array. * @n: number of elements. * @size: element size. * @flags: the type of memory to allocate. @@ -240,11 +240,22 @@ size_t ksize(const void *); * for general use, and so are not documented here. For a full list of * potential flags, always refer to linux/gfp.h. */ -static inline void *kcalloc(size_t n, size_t size, gfp_t flags) +static inline void *kmalloc_array(size_t n, size_t size, gfp_t flags) { if (size != 0 && n > ULONG_MAX / size) return NULL; - return __kmalloc(n * size, flags | __GFP_ZERO); + return __kmalloc(n * size, flags); +} + +/** + * kcalloc - allocate memory for an array. The memory is set to zero. + * @n: number of elements. + * @size: element size. + * @flags: the type of memory to allocate (see kmalloc). + */ +static inline void *kcalloc(size_t n, size_t size, gfp_t flags) +{ + return kmalloc_array(n, size, flags | __GFP_ZERO); } #if !defined(CONFIG_NUMA) && !defined(CONFIG_SLOB) diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index a32bcfdc7834..c2f8c8bc56ed 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -8,6 +8,7 @@ */ #include <linux/types.h> #include <linux/gfp.h> +#include <linux/bug.h> #include <linux/workqueue.h> #include <linux/kobject.h> @@ -21,7 +22,7 @@ enum stat_item { FREE_FROZEN, /* Freeing to frozen slab */ FREE_ADD_PARTIAL, /* Freeing moves slab to partial list */ FREE_REMOVE_PARTIAL, /* Freeing removes last object */ - ALLOC_FROM_PARTIAL, /* Cpu slab acquired from partial list */ + ALLOC_FROM_PARTIAL, /* Cpu slab acquired from node partial list */ ALLOC_SLAB, /* Cpu slab acquired from page allocator */ ALLOC_REFILL, /* Refill cpu slab from slab freelist */ ALLOC_NODE_MISMATCH, /* Switching cpu slab */ @@ -37,7 +38,9 @@ enum stat_item { CMPXCHG_DOUBLE_CPU_FAIL,/* Failure of this_cpu_cmpxchg_double */ CMPXCHG_DOUBLE_FAIL, /* Number of times that cmpxchg double did not match */ CPU_PARTIAL_ALLOC, /* Used cpu partial on alloc */ - CPU_PARTIAL_FREE, /* USed cpu partial on free */ + CPU_PARTIAL_FREE, /* Refill cpu partial on free */ + CPU_PARTIAL_NODE, /* Refill cpu partial from node partial */ + CPU_PARTIAL_DRAIN, /* Drain cpu partial to node partial */ NR_SLUB_STAT_ITEMS }; struct kmem_cache_cpu { diff --git a/include/linux/smp.h b/include/linux/smp.h index 8cc38d3bab0c..10530d92c04b 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -102,6 +102,22 @@ static inline void call_function_init(void) { } int on_each_cpu(smp_call_func_t func, void *info, int wait); /* + * Call a function on processors specified by mask, which might include + * the local one. + */ +void on_each_cpu_mask(const struct cpumask *mask, smp_call_func_t func, + void *info, bool wait); + +/* + * Call a function on each processor for which the supplied function + * cond_func returns a positive value. This may include the local + * processor. + */ +void on_each_cpu_cond(bool (*cond_func)(int cpu, void *info), + smp_call_func_t func, void *info, bool wait, + gfp_t gfp_flags); + +/* * Mark the boot cpu "online" so that it can call console drivers in * printk() and can access its per-cpu storage. */ @@ -132,6 +148,36 @@ static inline int up_smp_call_function(smp_call_func_t func, void *info) local_irq_enable(); \ 0; \ }) +/* + * Note we still need to test the mask even for UP + * because we actually can get an empty mask from + * code that on SMP might call us without the local + * CPU in the mask. + */ +#define on_each_cpu_mask(mask, func, info, wait) \ + do { \ + if (cpumask_test_cpu(0, (mask))) { \ + local_irq_disable(); \ + (func)(info); \ + local_irq_enable(); \ + } \ + } while (0) +/* + * Preemption is disabled here to make sure the cond_func is called under the + * same condtions in UP and SMP. + */ +#define on_each_cpu_cond(cond_func, func, info, wait, gfp_flags)\ + do { \ + void *__info = (info); \ + preempt_disable(); \ + if ((cond_func)(0, __info)) { \ + local_irq_disable(); \ + (func)(__info); \ + local_irq_enable(); \ + } \ + preempt_enable(); \ + } while (0) + static inline void smp_send_reschedule(int cpu) { } #define num_booting_cpus() 1 #define smp_prepare_boot_cpu() do {} while (0) diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h index 0f4eb165f254..32be8dbdf191 100644 --- a/include/linux/spi/mmc_spi.h +++ b/include/linux/spi/mmc_spi.h @@ -1,10 +1,10 @@ #ifndef __LINUX_SPI_MMC_SPI_H #define __LINUX_SPI_MMC_SPI_H -#include <linux/device.h> #include <linux/spi/spi.h> #include <linux/interrupt.h> +struct device; struct mmc_host; /* Put this in platform_data of a device being used to manage an MMC/SD diff --git a/include/linux/spi/orion_spi.h b/include/linux/spi/orion_spi.h index decf6d8c77b7..b4d9fa6f797c 100644 --- a/include/linux/spi/orion_spi.h +++ b/include/linux/spi/orion_spi.h @@ -11,7 +11,6 @@ struct orion_spi_info { u32 tclk; /* no <linux/clk.h> support yet */ - u32 enable_clock_fix; }; diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h new file mode 100644 index 000000000000..c23b923e493b --- /dev/null +++ b/include/linux/spi/s3c24xx.h @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - SPI Controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __LINUX_SPI_S3C24XX_H +#define __LINUX_SPI_S3C24XX_H __FILE__ + +struct s3c2410_spi_info { + int pin_cs; /* simple gpio cs */ + unsigned int num_cs; /* total chipselects */ + int bus_num; /* bus number to use. */ + + unsigned int use_fiq:1; /* use fiq */ + + void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable); + void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); +}; + +#endif /* __LINUX_SPI_S3C24XX_H */ diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index 7df6c17b0281..7d537ced949a 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -55,8 +55,8 @@ #include <linux/kernel.h> #include <linux/stringify.h> #include <linux/bottom_half.h> +#include <asm/barrier.h> -#include <asm/system.h> /* * Must define these before including other files, inline functions need them @@ -375,10 +375,7 @@ static inline int spin_can_lock(spinlock_t *lock) return raw_spin_can_lock(&lock->rlock); } -static inline void assert_spin_locked(spinlock_t *lock) -{ - assert_raw_spin_locked(&lock->rlock); -} +#define assert_spin_locked(lock) assert_raw_spin_locked(&(lock)->rlock) /* * Pull the atomic_t declaration: diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h index eba52a100533..6b05dcd927ff 100644 --- a/include/linux/ssb/ssb_driver_gige.h +++ b/include/linux/ssb/ssb_driver_gige.h @@ -2,6 +2,7 @@ #define LINUX_SSB_DRIVER_GIGE_H_ #include <linux/ssb/ssb.h> +#include <linux/bug.h> #include <linux/pci.h> #include <linux/spinlock.h> diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h index c170edc3bf5f..3b5e910d14ca 100644 --- a/include/linux/stop_machine.h +++ b/include/linux/stop_machine.h @@ -5,7 +5,6 @@ #include <linux/cpumask.h> #include <linux/smp.h> #include <linux/list.h> -#include <asm/system.h> /* * stop_cpu[s]() is simplistic per-cpu maximum priority cpu diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h index 7874a8a56638..492a36d72829 100644 --- a/include/linux/sunrpc/auth.h +++ b/include/linux/sunrpc/auth.h @@ -99,6 +99,8 @@ struct rpc_authops { struct rpc_cred * (*lookup_cred)(struct rpc_auth *, struct auth_cred *, int); struct rpc_cred * (*crcreate)(struct rpc_auth*, struct auth_cred *, int); + int (*pipes_create)(struct rpc_auth *); + void (*pipes_destroy)(struct rpc_auth *); }; struct rpc_credops { diff --git a/include/linux/sunrpc/bc_xprt.h b/include/linux/sunrpc/bc_xprt.h index f7f3ce340c08..969c0a671dbf 100644 --- a/include/linux/sunrpc/bc_xprt.h +++ b/include/linux/sunrpc/bc_xprt.h @@ -35,7 +35,7 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. struct rpc_rqst *xprt_alloc_bc_request(struct rpc_xprt *xprt); void xprt_free_bc_request(struct rpc_rqst *req); int xprt_setup_backchannel(struct rpc_xprt *, unsigned int min_reqs); -void xprt_destroy_backchannel(struct rpc_xprt *, int max_reqs); +void xprt_destroy_backchannel(struct rpc_xprt *, unsigned int max_reqs); int bc_send(struct rpc_rqst *req); /* diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 57531f8e5956..f5fd6160dbca 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -117,6 +117,7 @@ struct cache_detail { struct cache_detail_procfs procfs; struct cache_detail_pipefs pipefs; } u; + struct net *net; }; @@ -197,11 +198,14 @@ extern void cache_flush(void); extern void cache_purge(struct cache_detail *detail); #define NEVER (0x7FFFFFFF) extern void __init cache_initialize(void); -extern int cache_register(struct cache_detail *cd); extern int cache_register_net(struct cache_detail *cd, struct net *net); -extern void cache_unregister(struct cache_detail *cd); extern void cache_unregister_net(struct cache_detail *cd, struct net *net); +extern struct cache_detail *cache_create_net(struct cache_detail *tmpl, struct net *net); +extern void cache_destroy_net(struct cache_detail *cd, struct net *net); + +extern void sunrpc_init_cache_detail(struct cache_detail *cd); +extern void sunrpc_destroy_cache_detail(struct cache_detail *cd); extern int sunrpc_cache_register_pipefs(struct dentry *parent, const char *, umode_t, struct cache_detail *); extern void sunrpc_cache_unregister_pipefs(struct cache_detail *); diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index 2c5993a17c33..523547ecfee2 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -35,14 +35,13 @@ struct rpc_clnt { struct list_head cl_clients; /* Global list of clients */ struct list_head cl_tasks; /* List of tasks */ spinlock_t cl_lock; /* spinlock */ - struct rpc_xprt * cl_xprt; /* transport */ + struct rpc_xprt __rcu * cl_xprt; /* transport */ struct rpc_procinfo * cl_procinfo; /* procedure info */ u32 cl_prog, /* RPC program number */ cl_vers, /* RPC version number */ cl_maxproc; /* max procedure number */ - char * cl_server; /* server machine name */ - char * cl_protname; /* protocol name */ + const char * cl_protname; /* protocol name */ struct rpc_auth * cl_auth; /* authenticator */ struct rpc_stat * cl_stats; /* per-program statistics */ struct rpc_iostats * cl_metrics; /* per-client statistics */ @@ -57,12 +56,11 @@ struct rpc_clnt { int cl_nodelen; /* nodename length */ char cl_nodename[UNX_MAXNODENAME]; - struct path cl_path; + struct dentry * cl_dentry; struct rpc_clnt * cl_parent; /* Points to parent of clones */ struct rpc_rtt cl_rtt_default; struct rpc_timeout cl_timeout_default; - struct rpc_program * cl_program; - char cl_inline_name[32]; + const struct rpc_program *cl_program; char *cl_principal; /* target to authenticate to */ }; @@ -71,12 +69,12 @@ struct rpc_clnt { */ #define RPC_MAXVERSION 4 struct rpc_program { - char * name; /* protocol name */ + const char * name; /* protocol name */ u32 number; /* program number */ unsigned int nrvers; /* number of versions */ - struct rpc_version ** version; /* version array */ + const struct rpc_version ** version; /* version array */ struct rpc_stat * stats; /* statistics */ - char * pipe_dir_name; /* path to rpc_pipefs dir */ + const char * pipe_dir_name; /* path to rpc_pipefs dir */ }; struct rpc_version { @@ -97,7 +95,7 @@ struct rpc_procinfo { unsigned int p_count; /* call count */ unsigned int p_timer; /* Which RTT timer to use */ u32 p_statidx; /* Which procedure to account */ - char * p_name; /* name of procedure */ + const char * p_name; /* name of procedure */ }; #ifdef __KERNEL__ @@ -109,8 +107,8 @@ struct rpc_create_args { size_t addrsize; struct sockaddr *saddress; const struct rpc_timeout *timeout; - char *servername; - struct rpc_program *program; + const char *servername; + const struct rpc_program *program; u32 prognumber; /* overrides program->number */ u32 version; rpc_authflavor_t authflavor; @@ -129,17 +127,18 @@ struct rpc_create_args { struct rpc_clnt *rpc_create(struct rpc_create_args *args); struct rpc_clnt *rpc_bind_new_program(struct rpc_clnt *, - struct rpc_program *, u32); + const struct rpc_program *, u32); void rpc_task_reset_client(struct rpc_task *task, struct rpc_clnt *clnt); struct rpc_clnt *rpc_clone_client(struct rpc_clnt *); void rpc_shutdown_client(struct rpc_clnt *); void rpc_release_client(struct rpc_clnt *); void rpc_task_release_client(struct rpc_task *); -int rpcb_create_local(void); -void rpcb_put_local(void); -int rpcb_register(u32, u32, int, unsigned short); -int rpcb_v4_register(const u32 program, const u32 version, +int rpcb_create_local(struct net *); +void rpcb_put_local(struct net *); +int rpcb_register(struct net *, u32, u32, int, unsigned short); +int rpcb_v4_register(struct net *net, const u32 program, + const u32 version, const struct sockaddr *address, const char *netid); void rpcb_getport_async(struct rpc_task *); @@ -156,16 +155,19 @@ struct rpc_task *rpc_call_null(struct rpc_clnt *clnt, struct rpc_cred *cred, int rpc_restart_call_prepare(struct rpc_task *); int rpc_restart_call(struct rpc_task *); void rpc_setbufsize(struct rpc_clnt *, unsigned int, unsigned int); +int rpc_protocol(struct rpc_clnt *); +struct net * rpc_net_ns(struct rpc_clnt *); size_t rpc_max_payload(struct rpc_clnt *); void rpc_force_rebind(struct rpc_clnt *); size_t rpc_peeraddr(struct rpc_clnt *, struct sockaddr *, size_t); const char *rpc_peeraddr2str(struct rpc_clnt *, enum rpc_display_format_t); +int rpc_localaddr(struct rpc_clnt *, struct sockaddr *, size_t); size_t rpc_ntop(const struct sockaddr *, char *, const size_t); -size_t rpc_pton(const char *, const size_t, +size_t rpc_pton(struct net *, const char *, const size_t, struct sockaddr *, const size_t); char * rpc_sockaddr2uaddr(const struct sockaddr *, gfp_t); -size_t rpc_uaddr2sockaddr(const char *, const size_t, +size_t rpc_uaddr2sockaddr(struct net *, const char *, const size_t, struct sockaddr *, const size_t); static inline unsigned short rpc_get_port(const struct sockaddr *sap) diff --git a/include/linux/sunrpc/debug.h b/include/linux/sunrpc/debug.h index c2786f20016f..a76cc20d98ce 100644 --- a/include/linux/sunrpc/debug.h +++ b/include/linux/sunrpc/debug.h @@ -31,9 +31,12 @@ /* * Enable RPC debugging/profiling. */ -#ifdef CONFIG_SYSCTL +#ifdef CONFIG_SUNRPC_DEBUG #define RPC_DEBUG #endif +#ifdef CONFIG_TRACEPOINTS +#define RPC_TRACEPOINTS +#endif /* #define RPC_PROFILE */ /* @@ -47,15 +50,32 @@ extern unsigned int nlm_debug; #endif #define dprintk(args...) dfprintk(FACILITY, ## args) +#define dprintk_rcu(args...) dfprintk_rcu(FACILITY, ## args) #undef ifdebug #ifdef RPC_DEBUG # define ifdebug(fac) if (unlikely(rpc_debug & RPCDBG_##fac)) -# define dfprintk(fac, args...) do { ifdebug(fac) printk(args); } while(0) + +# define dfprintk(fac, args...) \ + do { \ + ifdebug(fac) \ + printk(KERN_DEFAULT args); \ + } while (0) + +# define dfprintk_rcu(fac, args...) \ + do { \ + ifdebug(fac) { \ + rcu_read_lock(); \ + printk(KERN_DEFAULT args); \ + rcu_read_unlock(); \ + } \ + } while (0) + # define RPC_IFDEBUG(x) x #else # define ifdebug(fac) if (0) -# define dfprintk(fac, args...) do ; while (0) +# define dfprintk(fac, args...) do {} while (0) +# define dfprintk_rcu(fac, args...) do {} while (0) # define RPC_IFDEBUG(x) #endif diff --git a/include/linux/sunrpc/metrics.h b/include/linux/sunrpc/metrics.h index b6edbc0ea83d..1565bbe86d51 100644 --- a/include/linux/sunrpc/metrics.h +++ b/include/linux/sunrpc/metrics.h @@ -74,14 +74,16 @@ struct rpc_clnt; #ifdef CONFIG_PROC_FS struct rpc_iostats * rpc_alloc_iostats(struct rpc_clnt *); -void rpc_count_iostats(struct rpc_task *); +void rpc_count_iostats(const struct rpc_task *, + struct rpc_iostats *); void rpc_print_iostats(struct seq_file *, struct rpc_clnt *); void rpc_free_iostats(struct rpc_iostats *); #else /* CONFIG_PROC_FS */ static inline struct rpc_iostats *rpc_alloc_iostats(struct rpc_clnt *clnt) { return NULL; } -static inline void rpc_count_iostats(struct rpc_task *task) {} +static inline void rpc_count_iostats(const struct rpc_task *task, + struct rpc_iostats *stats) {} static inline void rpc_print_iostats(struct seq_file *seq, struct rpc_clnt *clnt) {} static inline void rpc_free_iostats(struct rpc_iostats *stats) {} diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index 2bb03d77375a..a7b422b33eda 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -21,21 +21,26 @@ struct rpc_pipe_ops { void (*destroy_msg)(struct rpc_pipe_msg *); }; -struct rpc_inode { - struct inode vfs_inode; - void *private; +struct rpc_pipe { struct list_head pipe; struct list_head in_upcall; struct list_head in_downcall; int pipelen; int nreaders; int nwriters; - int nkern_readwriters; - wait_queue_head_t waitq; #define RPC_PIPE_WAIT_FOR_OPEN 1 int flags; struct delayed_work queue_timeout; const struct rpc_pipe_ops *ops; + spinlock_t lock; + struct dentry *dentry; +}; + +struct rpc_inode { + struct inode vfs_inode; + void *private; + struct rpc_pipe *pipe; + wait_queue_head_t waitq; }; static inline struct rpc_inode * @@ -44,9 +49,28 @@ RPC_I(struct inode *inode) return container_of(inode, struct rpc_inode, vfs_inode); } +enum { + SUNRPC_PIPEFS_NFS_PRIO, + SUNRPC_PIPEFS_RPC_PRIO, +}; + +extern int rpc_pipefs_notifier_register(struct notifier_block *); +extern void rpc_pipefs_notifier_unregister(struct notifier_block *); + +enum { + RPC_PIPEFS_MOUNT, + RPC_PIPEFS_UMOUNT, +}; + +extern struct dentry *rpc_d_lookup_sb(const struct super_block *sb, + const unsigned char *dir_name); +extern void rpc_pipefs_init_net(struct net *net); +extern struct super_block *rpc_get_sb_net(const struct net *net); +extern void rpc_put_sb_net(const struct net *net); + extern ssize_t rpc_pipe_generic_upcall(struct file *, struct rpc_pipe_msg *, char __user *, size_t); -extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *); +extern int rpc_queue_upcall(struct rpc_pipe *, struct rpc_pipe_msg *); struct rpc_clnt; extern struct dentry *rpc_create_client_dir(struct dentry *, struct qstr *, struct rpc_clnt *); @@ -59,11 +83,13 @@ extern struct dentry *rpc_create_cache_dir(struct dentry *, struct cache_detail *); extern void rpc_remove_cache_dir(struct dentry *); -extern struct dentry *rpc_mkpipe(struct dentry *, const char *, void *, - const struct rpc_pipe_ops *, int flags); +extern int rpc_rmdir(struct dentry *dentry); + +struct rpc_pipe *rpc_mkpipe_data(const struct rpc_pipe_ops *ops, int flags); +void rpc_destroy_pipe_data(struct rpc_pipe *pipe); +extern struct dentry *rpc_mkpipe_dentry(struct dentry *, const char *, void *, + struct rpc_pipe *); extern int rpc_unlink(struct dentry *); -extern struct vfsmount *rpc_get_mount(void); -extern void rpc_put_mount(void); extern int register_rpc_pipefs(void); extern void unregister_rpc_pipefs(void); diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index e7756896f3ca..dc0c3cc3ada3 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -103,6 +103,7 @@ typedef void (*rpc_action)(struct rpc_task *); struct rpc_call_ops { void (*rpc_call_prepare)(struct rpc_task *, void *); void (*rpc_call_done)(struct rpc_task *, void *); + void (*rpc_count_stats)(struct rpc_task *, void *); void (*rpc_release)(void *); }; @@ -195,7 +196,7 @@ struct rpc_wait_queue { unsigned char nr; /* # tasks remaining for cookie */ unsigned short qlen; /* total # tasks waiting in queue */ struct rpc_timer timer_list; -#ifdef RPC_DEBUG +#if defined(RPC_DEBUG) || defined(RPC_TRACEPOINTS) const char * name; #endif }; @@ -235,6 +236,9 @@ void rpc_wake_up_queued_task(struct rpc_wait_queue *, struct rpc_task *); void rpc_wake_up(struct rpc_wait_queue *); struct rpc_task *rpc_wake_up_next(struct rpc_wait_queue *); +struct rpc_task *rpc_wake_up_first(struct rpc_wait_queue *, + bool (*)(struct rpc_task *, void *), + void *); void rpc_wake_up_status(struct rpc_wait_queue *, int); int rpc_queue_empty(struct rpc_wait_queue *); void rpc_delay(struct rpc_task *, unsigned long); @@ -244,7 +248,8 @@ int rpciod_up(void); void rpciod_down(void); int __rpc_wait_for_completion_task(struct rpc_task *task, int (*)(void *)); #ifdef RPC_DEBUG -void rpc_show_tasks(void); +struct net; +void rpc_show_tasks(struct net *); #endif int rpc_init_mempool(void); void rpc_destroy_mempool(void); @@ -266,11 +271,22 @@ static inline int rpc_task_has_priority(struct rpc_task *task, unsigned char pri return (task->tk_priority + RPC_PRIORITY_LOW == prio); } -#ifdef RPC_DEBUG -static inline const char * rpc_qname(struct rpc_wait_queue *q) +#if defined(RPC_DEBUG) || defined (RPC_TRACEPOINTS) +static inline const char * rpc_qname(const struct rpc_wait_queue *q) { return ((q && q->name) ? q->name : "unknown"); } + +static inline void rpc_assign_waitqueue_name(struct rpc_wait_queue *q, + const char *name) +{ + q->name = name; +} +#else +static inline void rpc_assign_waitqueue_name(struct rpc_wait_queue *q, + const char *name) +{ +} #endif #endif /* _LINUX_SUNRPC_SCHED_H_ */ diff --git a/include/linux/sunrpc/stats.h b/include/linux/sunrpc/stats.h index 680471d1f28a..edc64219f92b 100644 --- a/include/linux/sunrpc/stats.h +++ b/include/linux/sunrpc/stats.h @@ -12,7 +12,7 @@ #include <linux/proc_fs.h> struct rpc_stat { - struct rpc_program * program; + const struct rpc_program *program; unsigned int netcnt, netudpcnt, @@ -58,24 +58,24 @@ void rpc_modcount(struct inode *, int); #endif #ifdef CONFIG_PROC_FS -struct proc_dir_entry * rpc_proc_register(struct rpc_stat *); -void rpc_proc_unregister(const char *); -void rpc_proc_zero(struct rpc_program *); -struct proc_dir_entry * svc_proc_register(struct svc_stat *, +struct proc_dir_entry * rpc_proc_register(struct net *,struct rpc_stat *); +void rpc_proc_unregister(struct net *,const char *); +void rpc_proc_zero(const struct rpc_program *); +struct proc_dir_entry * svc_proc_register(struct net *, struct svc_stat *, const struct file_operations *); -void svc_proc_unregister(const char *); +void svc_proc_unregister(struct net *, const char *); void svc_seq_show(struct seq_file *, const struct svc_stat *); #else -static inline struct proc_dir_entry *rpc_proc_register(struct rpc_stat *s) { return NULL; } -static inline void rpc_proc_unregister(const char *p) {} -static inline void rpc_proc_zero(struct rpc_program *p) {} +static inline struct proc_dir_entry *rpc_proc_register(struct net *net, struct rpc_stat *s) { return NULL; } +static inline void rpc_proc_unregister(struct net *net, const char *p) {} +static inline void rpc_proc_zero(const struct rpc_program *p) {} -static inline struct proc_dir_entry *svc_proc_register(struct svc_stat *s, +static inline struct proc_dir_entry *svc_proc_register(struct net *net, struct svc_stat *s, const struct file_operations *f) { return NULL; } -static inline void svc_proc_unregister(const char *p) {} +static inline void svc_proc_unregister(struct net *net, const char *p) {} static inline void svc_seq_show(struct seq_file *seq, const struct svc_stat *st) {} diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h index 35b37b1e9299..51b29ac45a8e 100644 --- a/include/linux/sunrpc/svc.h +++ b/include/linux/sunrpc/svc.h @@ -84,7 +84,8 @@ struct svc_serv { unsigned int sv_nrpools; /* number of thread pools */ struct svc_pool * sv_pools; /* array of thread pools */ - void (*sv_shutdown)(struct svc_serv *serv); + void (*sv_shutdown)(struct svc_serv *serv, + struct net *net); /* Callback to use when last thread * exits. */ @@ -413,22 +414,24 @@ struct svc_procedure { /* * Function prototypes. */ -void svc_rpcb_cleanup(struct svc_serv *serv); +int svc_rpcb_setup(struct svc_serv *serv, struct net *net); +void svc_rpcb_cleanup(struct svc_serv *serv, struct net *net); struct svc_serv *svc_create(struct svc_program *, unsigned int, - void (*shutdown)(struct svc_serv *)); + void (*shutdown)(struct svc_serv *, struct net *net)); struct svc_rqst *svc_prepare_thread(struct svc_serv *serv, struct svc_pool *pool, int node); void svc_exit_thread(struct svc_rqst *); struct svc_serv * svc_create_pooled(struct svc_program *, unsigned int, - void (*shutdown)(struct svc_serv *), + void (*shutdown)(struct svc_serv *, struct net *net), svc_thread_fn, struct module *); int svc_set_num_threads(struct svc_serv *, struct svc_pool *, int); int svc_pool_stats_open(struct svc_serv *serv, struct file *file); void svc_destroy(struct svc_serv *); +void svc_shutdown_net(struct svc_serv *, struct net *); int svc_process(struct svc_rqst *); int bc_svc_process(struct svc_serv *, struct rpc_rqst *, struct svc_rqst *); -int svc_register(const struct svc_serv *, const int, +int svc_register(const struct svc_serv *, struct net *, const int, const unsigned short, const unsigned short); void svc_wake_up(struct svc_serv *); diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index c14fe86dac59..0b8e3e6bdacf 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -190,7 +190,7 @@ extern int svc_rdma_xdr_encode_error(struct svcxprt_rdma *, extern void svc_rdma_xdr_encode_write_list(struct rpcrdma_msg *, int); extern void svc_rdma_xdr_encode_reply_array(struct rpcrdma_write_array *, int); extern void svc_rdma_xdr_encode_array_chunk(struct rpcrdma_write_array *, int, - u32, u64, u32); + __be32, __be64, u32); extern void svc_rdma_xdr_encode_reply_header(struct svcxprt_rdma *, struct rpcrdma_msg *, struct rpcrdma_msg *, @@ -292,7 +292,7 @@ svc_rdma_get_reply_array(struct rpcrdma_msg *rmsgp) if (wr_ary) { rp_ary = (struct rpcrdma_write_array *) &wr_ary-> - wc_array[wr_ary->wc_nchunks].wc_target.rs_length; + wc_array[ntohl(wr_ary->wc_nchunks)].wc_target.rs_length; goto found_it; } diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index dfa900948af7..b3f64b12f141 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -121,7 +121,8 @@ void svc_close_xprt(struct svc_xprt *xprt); int svc_port_is_privileged(struct sockaddr *sin); int svc_print_xprts(char *buf, int maxlen); struct svc_xprt *svc_find_xprt(struct svc_serv *serv, const char *xcl_name, - const sa_family_t af, const unsigned short port); + struct net *net, const sa_family_t af, + const unsigned short port); int svc_xprt_names(struct svc_serv *serv, char *buf, const int buflen); static inline void svc_xprt_get(struct svc_xprt *xprt) diff --git a/include/linux/sunrpc/svcauth.h b/include/linux/sunrpc/svcauth.h index 25d333c1b571..548790e9113b 100644 --- a/include/linux/sunrpc/svcauth.h +++ b/include/linux/sunrpc/svcauth.h @@ -135,6 +135,9 @@ extern void svcauth_unix_purge(void); extern void svcauth_unix_info_release(struct svc_xprt *xpt); extern int svcauth_unix_set_client(struct svc_rqst *rqstp); +extern int unix_gid_cache_create(struct net *net); +extern void unix_gid_cache_destroy(struct net *net); + static inline unsigned long hash_str(char *name, int bits) { unsigned long hash = 0; diff --git a/include/linux/sunrpc/svcauth_gss.h b/include/linux/sunrpc/svcauth_gss.h index 83bbee3f089c..7c32daa025eb 100644 --- a/include/linux/sunrpc/svcauth_gss.h +++ b/include/linux/sunrpc/svcauth_gss.h @@ -18,6 +18,8 @@ int gss_svc_init(void); void gss_svc_shutdown(void); +int gss_svc_init_net(struct net *net); +void gss_svc_shutdown_net(struct net *net); int svcauth_gss_register_pseudoflavor(u32 pseudoflavor, char * name); u32 svcauth_gss_flavor(struct auth_domain *dom); char *svc_gss_principal(struct svc_rqst *); diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h index c84e9741cb2a..cb4ac69e1f33 100644 --- a/include/linux/sunrpc/svcsock.h +++ b/include/linux/sunrpc/svcsock.h @@ -34,7 +34,7 @@ struct svc_sock { /* * Function prototypes. */ -void svc_close_all(struct svc_serv *); +void svc_close_net(struct svc_serv *, struct net *); int svc_recv(struct svc_rqst *, long); int svc_send(struct svc_rqst *); void svc_drop(struct svc_rqst *); diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 15518a152ac3..77d278defa70 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -21,8 +21,8 @@ #define RPC_MIN_SLOT_TABLE (2U) #define RPC_DEF_SLOT_TABLE (16U) -#define RPC_MAX_SLOT_TABLE (128U) #define RPC_MAX_SLOT_TABLE_LIMIT (65536U) +#define RPC_MAX_SLOT_TABLE RPC_MAX_SLOT_TABLE_LIMIT /* * This describes a timeout strategy @@ -219,13 +219,17 @@ struct rpc_xprt { connect_time, /* jiffies waiting for connect */ sends, /* how many complete requests */ recvs, /* how many complete requests */ - bad_xids; /* lookup_rqst didn't find XID */ + bad_xids, /* lookup_rqst didn't find XID */ + max_slots; /* max rpc_slots used */ unsigned long long req_u, /* average requests on the wire */ - bklog_u; /* backlog queue utilization */ + bklog_u, /* backlog queue utilization */ + sending_u, /* send q utilization */ + pending_u; /* pend q utilization */ } stat; struct net *xprt_net; + const char *servername; const char *address_strings[RPC_DISPLAY_MAX]; }; @@ -255,6 +259,7 @@ struct xprt_create { struct sockaddr * srcaddr; /* optional local address */ struct sockaddr * dstaddr; /* remote peer address */ size_t addrlen; + const char *servername; struct svc_xprt *bc_xprt; /* NFSv4.1 backchannel */ }; diff --git a/include/linux/sunrpc/xprtsock.h b/include/linux/sunrpc/xprtsock.h index 3f14a02e9cc0..1ad36cc25b2e 100644 --- a/include/linux/sunrpc/xprtsock.h +++ b/include/linux/sunrpc/xprtsock.h @@ -12,18 +12,6 @@ int init_socket_xprt(void); void cleanup_socket_xprt(void); -/* - * RPC slot table sizes for UDP, TCP transports - */ -extern unsigned int xprt_udp_slot_table_entries; -extern unsigned int xprt_tcp_slot_table_entries; - -/* - * Parameters for choosing a free port - */ -extern unsigned int xprt_min_resvport; -extern unsigned int xprt_max_resvport; - #define RPC_MIN_RESVPORT (1U) #define RPC_MAX_RESVPORT (65535U) #define RPC_DEF_MIN_RESVPORT (665U) diff --git a/include/linux/swap.h b/include/linux/swap.h index b86b5c20617d..8dc0ea7caf02 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -21,6 +21,9 @@ struct bio; #define SWAP_FLAG_PRIO_SHIFT 0 #define SWAP_FLAG_DISCARD 0x10000 /* discard swap cluster after use */ +#define SWAP_FLAGS_VALID (SWAP_FLAG_PRIO_MASK | SWAP_FLAG_PREFER | \ + SWAP_FLAG_DISCARD) + static inline int current_is_kswapd(void) { return current->flags & PF_KSWAPD; diff --git a/include/linux/swapops.h b/include/linux/swapops.h index 2189d3ffc85d..792d16d9cbc7 100644 --- a/include/linux/swapops.h +++ b/include/linux/swapops.h @@ -2,6 +2,7 @@ #define _LINUX_SWAPOPS_H #include <linux/radix-tree.h> +#include <linux/bug.h> /* * swapcache pages are stored in the swapper_space radix tree. We want to diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 8ec1153ff57b..3de3acb84a95 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -68,6 +68,7 @@ struct file_handle; #include <linux/aio_abi.h> #include <linux/capability.h> #include <linux/list.h> +#include <linux/bug.h> #include <linux/sem.h> #include <asm/siginfo.h> #include <asm/signal.h> diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index bb9127dd814b..c34b4c82b0dc 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -932,34 +932,14 @@ enum #include <linux/list.h> #include <linux/rcupdate.h> #include <linux/wait.h> +#include <linux/rbtree.h> /* For the /proc/sys support */ struct ctl_table; struct nsproxy; struct ctl_table_root; - -struct ctl_table_set { - struct list_head list; - struct ctl_table_set *parent; - int (*is_seen)(struct ctl_table_set *); -}; - -extern void setup_sysctl_set(struct ctl_table_set *p, - struct ctl_table_set *parent, - int (*is_seen)(struct ctl_table_set *)); - struct ctl_table_header; - -extern void sysctl_head_get(struct ctl_table_header *); -extern void sysctl_head_put(struct ctl_table_header *); -extern int sysctl_is_seen(struct ctl_table_header *); -extern struct ctl_table_header *sysctl_head_grab(struct ctl_table_header *); -extern struct ctl_table_header *sysctl_head_next(struct ctl_table_header *prev); -extern struct ctl_table_header *__sysctl_head_next(struct nsproxy *namespaces, - struct ctl_table_header *prev); -extern void sysctl_head_finish(struct ctl_table_header *prev); -extern int sysctl_perm(struct ctl_table_root *root, - struct ctl_table *table, int op); +struct ctl_dir; typedef struct ctl_table ctl_table; @@ -1023,8 +1003,6 @@ static inline void *proc_sys_poll_event(struct ctl_table_poll *poll) return (void *)(unsigned long)atomic_read(&poll->event); } -void proc_sys_poll_notify(struct ctl_table_poll *poll); - #define __CTL_TABLE_POLL_INITIALIZER(name) { \ .event = ATOMIC_INIT(0), \ .wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait) } @@ -1039,21 +1017,16 @@ struct ctl_table void *data; int maxlen; umode_t mode; - struct ctl_table *child; - struct ctl_table *parent; /* Automatically set */ + struct ctl_table *child; /* Deprecated */ proc_handler *proc_handler; /* Callback for text formatting */ struct ctl_table_poll *poll; void *extra1; void *extra2; }; -struct ctl_table_root { - struct list_head root_list; - struct ctl_table_set default_set; - struct ctl_table_set *(*lookup)(struct ctl_table_root *root, - struct nsproxy *namespaces); - int (*permissions)(struct ctl_table_root *root, - struct nsproxy *namespaces, struct ctl_table *table); +struct ctl_node { + struct rb_node node; + struct ctl_table_header *header; }; /* struct ctl_table_header is used to maintain dynamic lists of @@ -1063,9 +1036,9 @@ struct ctl_table_header union { struct { struct ctl_table *ctl_table; - struct list_head ctl_entry; int used; int count; + int nreg; }; struct rcu_head rcu; }; @@ -1073,9 +1046,27 @@ struct ctl_table_header struct ctl_table *ctl_table_arg; struct ctl_table_root *root; struct ctl_table_set *set; - struct ctl_table *attached_by; - struct ctl_table *attached_to; - struct ctl_table_header *parent; + struct ctl_dir *parent; + struct ctl_node *node; +}; + +struct ctl_dir { + /* Header must be at the start of ctl_dir */ + struct ctl_table_header header; + struct rb_root root; +}; + +struct ctl_table_set { + int (*is_seen)(struct ctl_table_set *); + struct ctl_dir dir; +}; + +struct ctl_table_root { + struct ctl_table_set default_set; + struct ctl_table_set *(*lookup)(struct ctl_table_root *root, + struct nsproxy *namespaces); + int (*permissions)(struct ctl_table_root *root, + struct nsproxy *namespaces, struct ctl_table *table); }; /* struct ctl_path describes where in the hierarchy a table is added */ @@ -1083,16 +1074,53 @@ struct ctl_path { const char *procname; }; +#ifdef CONFIG_SYSCTL + +void proc_sys_poll_notify(struct ctl_table_poll *poll); + +extern void setup_sysctl_set(struct ctl_table_set *p, + struct ctl_table_root *root, + int (*is_seen)(struct ctl_table_set *)); +extern void retire_sysctl_set(struct ctl_table_set *set); + void register_sysctl_root(struct ctl_table_root *root); +struct ctl_table_header *__register_sysctl_table( + struct ctl_table_set *set, + const char *path, struct ctl_table *table); struct ctl_table_header *__register_sysctl_paths( - struct ctl_table_root *root, struct nsproxy *namespaces, + struct ctl_table_set *set, const struct ctl_path *path, struct ctl_table *table); +struct ctl_table_header *register_sysctl(const char *path, struct ctl_table *table); struct ctl_table_header *register_sysctl_table(struct ctl_table * table); struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path, struct ctl_table *table); void unregister_sysctl_table(struct ctl_table_header * table); -int sysctl_check_table(struct nsproxy *namespaces, struct ctl_table *table); + +extern int sysctl_init(void); +#else /* CONFIG_SYSCTL */ +static inline struct ctl_table_header *register_sysctl_table(struct ctl_table * table) +{ + return NULL; +} + +static inline struct ctl_table_header *register_sysctl_paths( + const struct ctl_path *path, struct ctl_table *table) +{ + return NULL; +} + +static inline void unregister_sysctl_table(struct ctl_table_header * table) +{ +} + +static inline void setup_sysctl_set(struct ctl_table_set *p, + struct ctl_table_root *root, + int (*is_seen)(struct ctl_table_set *)) +{ +} + +#endif /* CONFIG_SYSCTL */ #endif /* __KERNEL__ */ diff --git a/include/linux/sysinfo.h b/include/linux/sysinfo.h new file mode 100644 index 000000000000..934335a22522 --- /dev/null +++ b/include/linux/sysinfo.h @@ -0,0 +1,24 @@ +#ifndef _LINUX_SYSINFO_H +#define _LINUX_SYSINFO_H + +#include <linux/types.h> + +#define SI_LOAD_SHIFT 16 +struct sysinfo { + __kernel_long_t uptime; /* Seconds since boot */ + __kernel_ulong_t loads[3]; /* 1, 5, and 15 minute load averages */ + __kernel_ulong_t totalram; /* Total usable main memory size */ + __kernel_ulong_t freeram; /* Available memory size */ + __kernel_ulong_t sharedram; /* Amount of shared memory */ + __kernel_ulong_t bufferram; /* Memory used by buffers */ + __kernel_ulong_t totalswap; /* Total swap space size */ + __kernel_ulong_t freeswap; /* swap space still available */ + __u16 procs; /* Number of current processes */ + __u16 pad; /* Explicit padding for m68k */ + __kernel_ulong_t totalhigh; /* Total high memory size */ + __kernel_ulong_t freehigh; /* Available high memory size */ + __u32 mem_unit; /* Memory unit size in bytes */ + char _f[20-2*sizeof(__kernel_ulong_t)-sizeof(__u32)]; /* Padding: libc5 uses this.. */ +}; + +#endif /* _LINUX_SYSINFO_H */ diff --git a/include/linux/time.h b/include/linux/time.h index b3061782dec3..33a92ead4d88 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -116,7 +116,6 @@ static inline struct timespec timespec_sub(struct timespec lhs, extern void read_persistent_clock(struct timespec *ts); extern void read_boot_clock(struct timespec *ts); extern int update_persistent_clock(struct timespec now); -extern int no_sync_cmos_clock __read_mostly; void timekeeping_init(void); extern int timekeeping_suspended; @@ -256,6 +255,7 @@ static __always_inline void timespec_add_ns(struct timespec *a, u64 ns) a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns); a->tv_nsec = ns; } + #endif /* __KERNEL__ */ #define NFDBITS __NFDBITS diff --git a/include/linux/timex.h b/include/linux/timex.h index b75e1864ed19..99bc88b1fc02 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -252,7 +252,7 @@ extern void ntp_clear(void); /* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */ extern u64 ntp_tick_length(void); -extern void second_overflow(void); +extern int second_overflow(unsigned long secs); extern int do_adjtimex(struct timex *); extern void hardpps(const struct timespec *, const struct timespec *); diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index a71a2927a6a0..51bd91d911c3 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -54,12 +54,12 @@ struct linux_binprm; /* * ptrace report for syscall entry and exit looks identical. */ -static inline void ptrace_report_syscall(struct pt_regs *regs) +static inline int ptrace_report_syscall(struct pt_regs *regs) { int ptrace = current->ptrace; if (!(ptrace & PT_PTRACED)) - return; + return 0; ptrace_notify(SIGTRAP | ((ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); @@ -72,6 +72,8 @@ static inline void ptrace_report_syscall(struct pt_regs *regs) send_sig(current->exit_code, current, 1); current->exit_code = 0; } + + return fatal_signal_pending(current); } /** @@ -96,8 +98,7 @@ static inline void ptrace_report_syscall(struct pt_regs *regs) static inline __must_check int tracehook_report_syscall_entry( struct pt_regs *regs) { - ptrace_report_syscall(regs); - return 0; + return ptrace_report_syscall(regs); } /** diff --git a/include/linux/transport_class.h b/include/linux/transport_class.h index 9ae8da3e6407..11087cdd4ad3 100644 --- a/include/linux/transport_class.h +++ b/include/linux/transport_class.h @@ -10,6 +10,7 @@ #define _TRANSPORT_CLASS_H_ #include <linux/device.h> +#include <linux/bug.h> #include <linux/attribute_container.h> struct transport_container; diff --git a/include/linux/tty.h b/include/linux/tty.h index a91ff403b3bf..9f47ab540f65 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -44,7 +44,6 @@ #include <linux/tty_ldisc.h> #include <linux/mutex.h> -#include <asm/system.h> /* diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 5e11f8a1f867..c9c9a4680cc5 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -235,16 +235,25 @@ struct v4l2_fract { __u32 denominator; }; -/* - * D R I V E R C A P A B I L I T I E S - */ +/** + * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP + * + * @driver: name of the driver module (e.g. "bttv") + * @card: name of the card (e.g. "Hauppauge WinTV") + * @bus_info: name of the bus (e.g. "PCI:" + pci_name(pci_dev) ) + * @version: KERNEL_VERSION + * @capabilities: capabilities of the physical device as a whole + * @device_caps: capabilities accessed via this particular device (node) + * @reserved: reserved fields for future extensions + */ struct v4l2_capability { - __u8 driver[16]; /* i.e. "bttv" */ - __u8 card[32]; /* i.e. "Hauppauge WinTV" */ - __u8 bus_info[32]; /* "PCI:" + pci_name(pci_dev) */ - __u32 version; /* should use KERNEL_VERSION() */ - __u32 capabilities; /* Device capabilities */ - __u32 reserved[4]; + __u8 driver[16]; + __u8 card[32]; + __u8 bus_info[32]; + __u32 version; + __u32 capabilities; + __u32 device_caps; + __u32 reserved[3]; }; /* Values for 'capabilities' field */ @@ -274,6 +283,8 @@ struct v4l2_capability { #define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ #define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ +#define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */ + /* * V I D E O I M A G E F O R M A T */ @@ -751,20 +762,20 @@ struct v4l2_crop { /* Selection targets */ -/* current cropping area */ -#define V4L2_SEL_TGT_CROP_ACTIVE 0 -/* default cropping area */ -#define V4L2_SEL_TGT_CROP_DEFAULT 1 -/* cropping bounds */ -#define V4L2_SEL_TGT_CROP_BOUNDS 2 -/* current composing area */ -#define V4L2_SEL_TGT_COMPOSE_ACTIVE 256 -/* default composing area */ -#define V4L2_SEL_TGT_COMPOSE_DEFAULT 257 -/* composing bounds */ -#define V4L2_SEL_TGT_COMPOSE_BOUNDS 258 -/* current composing area plus all padding pixels */ -#define V4L2_SEL_TGT_COMPOSE_PADDED 259 +/* Current cropping area */ +#define V4L2_SEL_TGT_CROP_ACTIVE 0x0000 +/* Default cropping area */ +#define V4L2_SEL_TGT_CROP_DEFAULT 0x0001 +/* Cropping bounds */ +#define V4L2_SEL_TGT_CROP_BOUNDS 0x0002 +/* Current composing area */ +#define V4L2_SEL_TGT_COMPOSE_ACTIVE 0x0100 +/* Default composing area */ +#define V4L2_SEL_TGT_COMPOSE_DEFAULT 0x0101 +/* Composing bounds */ +#define V4L2_SEL_TGT_COMPOSE_BOUNDS 0x0102 +/* Current composing area plus all padding pixels */ +#define V4L2_SEL_TGT_COMPOSE_PADDED 0x0103 /** * struct v4l2_selection - selection info @@ -774,7 +785,7 @@ struct v4l2_crop { * @r: coordinates of selection window * @reserved: for future use, rounds structure size to 64 bytes, set to zero * - * Hardware may use multiple helper window to process a video stream. + * Hardware may use multiple helper windows to process a video stream. * The structure is used to exchange this selection areas between * an application and a driver. */ @@ -1125,6 +1136,7 @@ struct v4l2_ext_controls { #define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */ #define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator control class */ #define V4L2_CTRL_CLASS_FLASH 0x009c0000 /* Camera flash controls */ +#define V4L2_CTRL_CLASS_JPEG 0x009d0000 /* JPEG-compression controls */ #define V4L2_CTRL_ID_MASK (0x0fffffff) #define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) @@ -1396,6 +1408,16 @@ enum v4l2_mpeg_audio_ac3_bitrate { V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17, V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18, }; +#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK (V4L2_CID_MPEG_BASE+112) +enum v4l2_mpeg_audio_dec_playback { + V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO = 0, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO = 1, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT = 2, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT = 3, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO = 4, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5, +}; +#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_MPEG_BASE+113) /* MPEG video controls specific to multiplexed streams */ #define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_MPEG_BASE+200) @@ -1446,6 +1468,9 @@ enum v4l2_mpeg_video_multi_slice_mode { V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES = 2, }; #define V4L2_CID_MPEG_VIDEO_VBV_SIZE (V4L2_CID_MPEG_BASE+222) +#define V4L2_CID_MPEG_VIDEO_DEC_PTS (V4L2_CID_MPEG_BASE+223) +#define V4L2_CID_MPEG_VIDEO_DEC_FRAME (V4L2_CID_MPEG_BASE+224) + #define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300) #define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301) #define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (V4L2_CID_MPEG_BASE+302) @@ -1734,6 +1759,29 @@ enum v4l2_flash_strobe_source { #define V4L2_CID_FLASH_CHARGE (V4L2_CID_FLASH_CLASS_BASE + 11) #define V4L2_CID_FLASH_READY (V4L2_CID_FLASH_CLASS_BASE + 12) +/* JPEG-class control IDs defined by V4L2 */ +#define V4L2_CID_JPEG_CLASS_BASE (V4L2_CTRL_CLASS_JPEG | 0x900) +#define V4L2_CID_JPEG_CLASS (V4L2_CTRL_CLASS_JPEG | 1) + +#define V4L2_CID_JPEG_CHROMA_SUBSAMPLING (V4L2_CID_JPEG_CLASS_BASE + 1) +enum v4l2_jpeg_chroma_subsampling { + V4L2_JPEG_CHROMA_SUBSAMPLING_444 = 0, + V4L2_JPEG_CHROMA_SUBSAMPLING_422 = 1, + V4L2_JPEG_CHROMA_SUBSAMPLING_420 = 2, + V4L2_JPEG_CHROMA_SUBSAMPLING_411 = 3, + V4L2_JPEG_CHROMA_SUBSAMPLING_410 = 4, + V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY = 5, +}; +#define V4L2_CID_JPEG_RESTART_INTERVAL (V4L2_CID_JPEG_CLASS_BASE + 2) +#define V4L2_CID_JPEG_COMPRESSION_QUALITY (V4L2_CID_JPEG_CLASS_BASE + 3) + +#define V4L2_CID_JPEG_ACTIVE_MARKER (V4L2_CID_JPEG_CLASS_BASE + 4) +#define V4L2_JPEG_ACTIVE_MARKER_APP0 (1 << 0) +#define V4L2_JPEG_ACTIVE_MARKER_APP1 (1 << 1) +#define V4L2_JPEG_ACTIVE_MARKER_COM (1 << 16) +#define V4L2_JPEG_ACTIVE_MARKER_DQT (1 << 17) +#define V4L2_JPEG_ACTIVE_MARKER_DHT (1 << 18) + /* * T U N I N G */ @@ -1897,6 +1945,54 @@ struct v4l2_encoder_cmd { }; }; +/* Decoder commands */ +#define V4L2_DEC_CMD_START (0) +#define V4L2_DEC_CMD_STOP (1) +#define V4L2_DEC_CMD_PAUSE (2) +#define V4L2_DEC_CMD_RESUME (3) + +/* Flags for V4L2_DEC_CMD_START */ +#define V4L2_DEC_CMD_START_MUTE_AUDIO (1 << 0) + +/* Flags for V4L2_DEC_CMD_PAUSE */ +#define V4L2_DEC_CMD_PAUSE_TO_BLACK (1 << 0) + +/* Flags for V4L2_DEC_CMD_STOP */ +#define V4L2_DEC_CMD_STOP_TO_BLACK (1 << 0) +#define V4L2_DEC_CMD_STOP_IMMEDIATELY (1 << 1) + +/* Play format requirements (returned by the driver): */ + +/* The decoder has no special format requirements */ +#define V4L2_DEC_START_FMT_NONE (0) +/* The decoder requires full GOPs */ +#define V4L2_DEC_START_FMT_GOP (1) + +/* The structure must be zeroed before use by the application + This ensures it can be extended safely in the future. */ +struct v4l2_decoder_cmd { + __u32 cmd; + __u32 flags; + union { + struct { + __u64 pts; + } stop; + + struct { + /* 0 or 1000 specifies normal speed, + 1 specifies forward single stepping, + -1 specifies backward single stepping, + >1: playback at speed/1000 of the normal speed, + <-1: reverse playback at (-speed/1000) of the normal speed. */ + __s32 speed; + __u32 format; + } start; + + struct { + __u32 data[16]; + } raw; + }; +}; #endif @@ -2307,6 +2403,11 @@ struct v4l2_create_buffers { #define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection) #define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection) +/* Experimental, these two ioctls may change over the next couple of kernel + versions. */ +#define VIDIOC_DECODER_CMD _IOWR('V', 96, struct v4l2_decoder_cmd) +#define VIDIOC_TRY_DECODER_CMD _IOWR('V', 97, struct v4l2_decoder_cmd) + /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 5206d6541da5..7323a3390206 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -53,6 +53,7 @@ #ifdef __KERNEL__ #include <linux/err.h> +#include <linux/bug.h> #include <linux/virtio.h> /** diff --git a/include/linux/virtio_ids.h b/include/linux/virtio_ids.h index 85bb0bb66ffc..7529b854b7fd 100644 --- a/include/linux/virtio_ids.h +++ b/include/linux/virtio_ids.h @@ -34,6 +34,8 @@ #define VIRTIO_ID_CONSOLE 3 /* virtio console */ #define VIRTIO_ID_RNG 4 /* virtio ring */ #define VIRTIO_ID_BALLOON 5 /* virtio balloon */ +#define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */ +#define VIRTIO_ID_SCSI 8 /* virtio scsi */ #define VIRTIO_ID_9P 9 /* 9p virtio console */ #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h new file mode 100644 index 000000000000..8ddeafdc0546 --- /dev/null +++ b/include/linux/virtio_scsi.h @@ -0,0 +1,114 @@ +#ifndef _LINUX_VIRTIO_SCSI_H +#define _LINUX_VIRTIO_SCSI_H +/* This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. */ + +#define VIRTIO_SCSI_CDB_SIZE 32 +#define VIRTIO_SCSI_SENSE_SIZE 96 + +/* SCSI command request, followed by data-out */ +struct virtio_scsi_cmd_req { + u8 lun[8]; /* Logical Unit Number */ + u64 tag; /* Command identifier */ + u8 task_attr; /* Task attribute */ + u8 prio; + u8 crn; + u8 cdb[VIRTIO_SCSI_CDB_SIZE]; +} __packed; + +/* Response, followed by sense data and data-in */ +struct virtio_scsi_cmd_resp { + u32 sense_len; /* Sense data length */ + u32 resid; /* Residual bytes in data buffer */ + u16 status_qualifier; /* Status qualifier */ + u8 status; /* Command completion status */ + u8 response; /* Response values */ + u8 sense[VIRTIO_SCSI_SENSE_SIZE]; +} __packed; + +/* Task Management Request */ +struct virtio_scsi_ctrl_tmf_req { + u32 type; + u32 subtype; + u8 lun[8]; + u64 tag; +} __packed; + +struct virtio_scsi_ctrl_tmf_resp { + u8 response; +} __packed; + +/* Asynchronous notification query/subscription */ +struct virtio_scsi_ctrl_an_req { + u32 type; + u8 lun[8]; + u32 event_requested; +} __packed; + +struct virtio_scsi_ctrl_an_resp { + u32 event_actual; + u8 response; +} __packed; + +struct virtio_scsi_event { + u32 event; + u8 lun[8]; + u32 reason; +} __packed; + +struct virtio_scsi_config { + u32 num_queues; + u32 seg_max; + u32 max_sectors; + u32 cmd_per_lun; + u32 event_info_size; + u32 sense_size; + u32 cdb_size; + u16 max_channel; + u16 max_target; + u32 max_lun; +} __packed; + +/* Response codes */ +#define VIRTIO_SCSI_S_OK 0 +#define VIRTIO_SCSI_S_OVERRUN 1 +#define VIRTIO_SCSI_S_ABORTED 2 +#define VIRTIO_SCSI_S_BAD_TARGET 3 +#define VIRTIO_SCSI_S_RESET 4 +#define VIRTIO_SCSI_S_BUSY 5 +#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6 +#define VIRTIO_SCSI_S_TARGET_FAILURE 7 +#define VIRTIO_SCSI_S_NEXUS_FAILURE 8 +#define VIRTIO_SCSI_S_FAILURE 9 +#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED 10 +#define VIRTIO_SCSI_S_FUNCTION_REJECTED 11 +#define VIRTIO_SCSI_S_INCORRECT_LUN 12 + +/* Controlq type codes. */ +#define VIRTIO_SCSI_T_TMF 0 +#define VIRTIO_SCSI_T_AN_QUERY 1 +#define VIRTIO_SCSI_T_AN_SUBSCRIBE 2 + +/* Valid TMF subtypes. */ +#define VIRTIO_SCSI_T_TMF_ABORT_TASK 0 +#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET 1 +#define VIRTIO_SCSI_T_TMF_CLEAR_ACA 2 +#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET 3 +#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET 4 +#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET 5 +#define VIRTIO_SCSI_T_TMF_QUERY_TASK 6 +#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET 7 + +/* Events. */ +#define VIRTIO_SCSI_T_EVENTS_MISSED 0x80000000 +#define VIRTIO_SCSI_T_NO_EVENT 0 +#define VIRTIO_SCSI_T_TRANSPORT_RESET 1 +#define VIRTIO_SCSI_T_ASYNC_NOTIFY 2 + +#define VIRTIO_SCSI_S_SIMPLE 0 +#define VIRTIO_SCSI_S_ORDERED 1 +#define VIRTIO_SCSI_S_HEAD 2 +#define VIRTIO_SCSI_S_ACA 3 + + +#endif /* _LINUX_VIRTIO_SCSI_H */ diff --git a/include/linux/wait.h b/include/linux/wait.h index 7d9a9e990ce6..1dee81c41ff1 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -22,7 +22,6 @@ #include <linux/list.h> #include <linux/stddef.h> #include <linux/spinlock.h> -#include <asm/system.h> #include <asm/current.h> typedef struct __wait_queue wait_queue_t; diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index 43ba5b3ce2a3..ac40716b44e9 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -66,6 +66,7 @@ struct watchdog_device; * @ping: The routine that sends a keepalive ping to the watchdog device. * @status: The routine that shows the status of the watchdog device. * @set_timeout:The routine for setting the watchdog devices timeout value. + * @get_timeleft:The routine that get's the time that's left before a reset. * @ioctl: The routines that handles extra ioctl calls. * * The watchdog_ops structure contains a list of low-level operations @@ -82,6 +83,7 @@ struct watchdog_ops { int (*ping)(struct watchdog_device *); unsigned int (*status)(struct watchdog_device *); int (*set_timeout)(struct watchdog_device *, unsigned int); + unsigned int (*get_timeleft)(struct watchdog_device *); long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long); }; @@ -127,7 +129,7 @@ struct watchdog_device { #endif /* Use the following function to set the nowayout feature */ -static inline void watchdog_set_nowayout(struct watchdog_device *wdd, int nowayout) +static inline void watchdog_set_nowayout(struct watchdog_device *wdd, bool nowayout) { if (nowayout) set_bit(WDOG_NO_WAY_OUT, &wdd->status); diff --git a/include/linux/wimax/debug.h b/include/linux/wimax/debug.h index 57031b4d12f2..aaf24ba12c4d 100644 --- a/include/linux/wimax/debug.h +++ b/include/linux/wimax/debug.h @@ -154,9 +154,9 @@ #define __debug__h__ #include <linux/types.h> -#include <linux/device.h> #include <linux/slab.h> +struct device; /* Backend stuff */ |