diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/mtd/mtd.h | 2 | ||||
| -rw-r--r-- | include/linux/mtd/onfi.h | 41 | ||||
| -rw-r--r-- | include/linux/mtd/rawnand.h | 161 | ||||
| -rw-r--r-- | include/linux/mtd/spi-nor.h | 2 | ||||
| -rw-r--r-- | include/linux/nvmem-provider.h | 2 | ||||
| -rw-r--r-- | include/linux/pl353-smc.h | 30 |
6 files changed, 189 insertions, 49 deletions
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index a89955f3cbc8..88227044fc86 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -380,6 +380,8 @@ struct mtd_info { int usecount; struct mtd_debug_info dbg; struct nvmem_device *nvmem; + struct nvmem_device *otp_user_nvmem; + struct nvmem_device *otp_factory_nvmem; /* * Parent device from the MTD partition point of view. diff --git a/include/linux/mtd/onfi.h b/include/linux/mtd/onfi.h index 339ac798568e..a7376f9beddf 100644 --- a/include/linux/mtd/onfi.h +++ b/include/linux/mtd/onfi.h @@ -11,6 +11,7 @@ #define __LINUX_MTD_ONFI_H #include <linux/types.h> +#include <linux/bitfield.h> /* ONFI version bits */ #define ONFI_VERSION_1_0 BIT(1) @@ -24,17 +25,22 @@ #define ONFI_VERSION_4_0 BIT(9) /* ONFI features */ -#define ONFI_FEATURE_16_BIT_BUS (1 << 0) -#define ONFI_FEATURE_EXT_PARAM_PAGE (1 << 7) +#define ONFI_FEATURE_16_BIT_BUS BIT(0) +#define ONFI_FEATURE_NV_DDR BIT(5) +#define ONFI_FEATURE_EXT_PARAM_PAGE BIT(7) /* ONFI timing mode, used in both asynchronous and synchronous mode */ -#define ONFI_TIMING_MODE_0 (1 << 0) -#define ONFI_TIMING_MODE_1 (1 << 1) -#define ONFI_TIMING_MODE_2 (1 << 2) -#define ONFI_TIMING_MODE_3 (1 << 3) -#define ONFI_TIMING_MODE_4 (1 << 4) -#define ONFI_TIMING_MODE_5 (1 << 5) -#define ONFI_TIMING_MODE_UNKNOWN (1 << 6) +#define ONFI_DATA_INTERFACE_SDR 0 +#define ONFI_DATA_INTERFACE_NVDDR BIT(4) +#define ONFI_DATA_INTERFACE_NVDDR2 BIT(5) +#define ONFI_TIMING_MODE_0 BIT(0) +#define ONFI_TIMING_MODE_1 BIT(1) +#define ONFI_TIMING_MODE_2 BIT(2) +#define ONFI_TIMING_MODE_3 BIT(3) +#define ONFI_TIMING_MODE_4 BIT(4) +#define ONFI_TIMING_MODE_5 BIT(5) +#define ONFI_TIMING_MODE_UNKNOWN BIT(6) +#define ONFI_TIMING_MODE_PARAM(x) FIELD_GET(GENMASK(3, 0), (x)) /* ONFI feature number/address */ #define ONFI_FEATURE_NUMBER 256 @@ -49,7 +55,7 @@ #define ONFI_SUBFEATURE_PARAM_LEN 4 /* ONFI optional commands SET/GET FEATURES supported? */ -#define ONFI_OPT_CMD_SET_GET_FEATURES (1 << 2) +#define ONFI_OPT_CMD_SET_GET_FEATURES BIT(2) struct nand_onfi_params { /* rev info and features block */ @@ -93,14 +99,15 @@ struct nand_onfi_params { /* electrical parameter block */ u8 io_pin_capacitance_max; - __le16 async_timing_mode; + __le16 sdr_timing_modes; __le16 program_cache_timing_mode; __le16 t_prog; __le16 t_bers; __le16 t_r; __le16 t_ccs; - __le16 src_sync_timing_mode; - u8 src_ssync_features; + u8 nvddr_timing_modes; + u8 nvddr2_timing_modes; + u8 nvddr_nvddr2_features; __le16 clk_pin_capacitance_typ; __le16 io_pin_capacitance_typ; __le16 input_pin_capacitance_typ; @@ -160,7 +167,9 @@ struct onfi_ext_param_page { * @tBERS: Block erase time * @tR: Page read time * @tCCS: Change column setup time - * @async_timing_mode: Supported asynchronous timing mode + * @fast_tCAD: Command/Address/Data slow or fast delay (NV-DDR only) + * @sdr_timing_modes: Supported asynchronous/SDR timing modes + * @nvddr_timing_modes: Supported source synchronous/NV-DDR timing modes * @vendor_revision: Vendor specific revision number * @vendor: Vendor specific data */ @@ -170,7 +179,9 @@ struct onfi_params { u16 tBERS; u16 tR; u16 tCCS; - u16 async_timing_mode; + bool fast_tCAD; + u16 sdr_timing_modes; + u16 nvddr_timing_modes; u16 vendor_revision; u8 vendor[88]; }; diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index 29df2f43dcb5..b2f9dd3cbd69 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -24,6 +24,7 @@ #include <linux/types.h> struct nand_chip; +struct gpio_desc; /* The maximum number of NAND chips in an array */ #define NAND_MAX_CHIPS 8 @@ -385,8 +386,8 @@ struct nand_ecc_ctrl { * This struct defines the timing requirements of a SDR NAND chip. * These information can be found in every NAND datasheets and the timings * meaning are described in the ONFI specifications: - * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing - * Parameters) + * https://media-www.micron.com/-/media/client/onfi/specs/onfi_3_1_spec.pdf + * (chapter 4.15 Timing Parameters) * * All these timings are expressed in picoseconds. * @@ -472,11 +473,127 @@ struct nand_sdr_timings { }; /** + * struct nand_nvddr_timings - NV-DDR NAND chip timings + * + * This struct defines the timing requirements of a NV-DDR NAND data interface. + * These information can be found in every NAND datasheets and the timings + * meaning are described in the ONFI specifications: + * https://media-www.micron.com/-/media/client/onfi/specs/onfi_4_1_gold.pdf + * (chapter 4.18.2 NV-DDR) + * + * All these timings are expressed in picoseconds. + * + * @tBERS_max: Block erase time + * @tCCS_min: Change column setup time + * @tPROG_max: Page program time + * @tR_max: Page read time + * @tAC_min: Access window of DQ[7:0] from CLK + * @tAC_max: Access window of DQ[7:0] from CLK + * @tADL_min: ALE to data loading time + * @tCAD_min: Command, Address, Data delay + * @tCAH_min: Command/Address DQ hold time + * @tCALH_min: W/R_n, CLE and ALE hold time + * @tCALS_min: W/R_n, CLE and ALE setup time + * @tCAS_min: Command/address DQ setup time + * @tCEH_min: CE# high hold time + * @tCH_min: CE# hold time + * @tCK_min: Average clock cycle time + * @tCS_min: CE# setup time + * @tDH_min: Data hold time + * @tDQSCK_min: Start of the access window of DQS from CLK + * @tDQSCK_max: End of the access window of DQS from CLK + * @tDQSD_min: Min W/R_n low to DQS/DQ driven by device + * @tDQSD_max: Max W/R_n low to DQS/DQ driven by device + * @tDQSHZ_max: W/R_n high to DQS/DQ tri-state by device + * @tDQSQ_max: DQS-DQ skew, DQS to last DQ valid, per access + * @tDS_min: Data setup time + * @tDSC_min: DQS cycle time + * @tFEAT_max: Busy time for Set Features and Get Features + * @tITC_max: Interface and Timing Mode Change time + * @tQHS_max: Data hold skew factor + * @tRHW_min: Data output cycle to command, address, or data input cycle + * @tRR_min: Ready to RE# low (data only) + * @tRST_max: Device reset time, measured from the falling edge of R/B# to the + * rising edge of R/B#. + * @tWB_max: WE# high to SR[6] low + * @tWHR_min: WE# high to RE# low + * @tWRCK_min: W/R_n low to data output cycle + * @tWW_min: WP# transition to WE# low + */ +struct nand_nvddr_timings { + u64 tBERS_max; + u32 tCCS_min; + u64 tPROG_max; + u64 tR_max; + u32 tAC_min; + u32 tAC_max; + u32 tADL_min; + u32 tCAD_min; + u32 tCAH_min; + u32 tCALH_min; + u32 tCALS_min; + u32 tCAS_min; + u32 tCEH_min; + u32 tCH_min; + u32 tCK_min; + u32 tCS_min; + u32 tDH_min; + u32 tDQSCK_min; + u32 tDQSCK_max; + u32 tDQSD_min; + u32 tDQSD_max; + u32 tDQSHZ_max; + u32 tDQSQ_max; + u32 tDS_min; + u32 tDSC_min; + u32 tFEAT_max; + u32 tITC_max; + u32 tQHS_max; + u32 tRHW_min; + u32 tRR_min; + u32 tRST_max; + u32 tWB_max; + u32 tWHR_min; + u32 tWRCK_min; + u32 tWW_min; +}; + +/* + * While timings related to the data interface itself are mostly different + * between SDR and NV-DDR, timings related to the internal chip behavior are + * common. IOW, the following entries which describe the internal delays have + * the same definition and are shared in both SDR and NV-DDR timing structures: + * - tADL_min + * - tBERS_max + * - tCCS_min + * - tFEAT_max + * - tPROG_max + * - tR_max + * - tRR_min + * - tRST_max + * - tWB_max + * + * The below macros return the value of a given timing, no matter the interface. + */ +#define NAND_COMMON_TIMING_PS(conf, timing_name) \ + nand_interface_is_sdr(conf) ? \ + nand_get_sdr_timings(conf)->timing_name : \ + nand_get_nvddr_timings(conf)->timing_name + +#define NAND_COMMON_TIMING_MS(conf, timing_name) \ + PSEC_TO_MSEC(NAND_COMMON_TIMING_PS((conf), timing_name)) + +#define NAND_COMMON_TIMING_NS(conf, timing_name) \ + PSEC_TO_NSEC(NAND_COMMON_TIMING_PS((conf), timing_name)) + +/** * enum nand_interface_type - NAND interface type * @NAND_SDR_IFACE: Single Data Rate interface + * @NAND_NVDDR_IFACE: Double Data Rate interface */ enum nand_interface_type { NAND_SDR_IFACE, + NAND_NVDDR_IFACE, }; /** @@ -485,6 +602,7 @@ enum nand_interface_type { * @timings: The timing information * @timings.mode: Timing mode as defined in the specification * @timings.sdr: Use it when @type is %NAND_SDR_IFACE. + * @timings.nvddr: Use it when @type is %NAND_NVDDR_IFACE. */ struct nand_interface_config { enum nand_interface_type type; @@ -492,24 +610,56 @@ struct nand_interface_config { unsigned int mode; union { struct nand_sdr_timings sdr; + struct nand_nvddr_timings nvddr; }; } timings; }; /** + * nand_interface_is_sdr - get the interface type + * @conf: The data interface + */ +static bool nand_interface_is_sdr(const struct nand_interface_config *conf) +{ + return conf->type == NAND_SDR_IFACE; +} + +/** + * nand_interface_is_nvddr - get the interface type + * @conf: The data interface + */ +static bool nand_interface_is_nvddr(const struct nand_interface_config *conf) +{ + return conf->type == NAND_NVDDR_IFACE; +} + +/** * nand_get_sdr_timings - get SDR timing from data interface * @conf: The data interface */ static inline const struct nand_sdr_timings * nand_get_sdr_timings(const struct nand_interface_config *conf) { - if (conf->type != NAND_SDR_IFACE) + if (!nand_interface_is_sdr(conf)) return ERR_PTR(-EINVAL); return &conf->timings.sdr; } /** + * nand_get_nvddr_timings - get NV-DDR timing from data interface + * @conf: The data interface + */ +static inline const struct nand_nvddr_timings * +nand_get_nvddr_timings(const struct nand_interface_config *conf) +{ + if (!nand_interface_is_nvddr(conf)) + return ERR_PTR(-EINVAL); + + return &conf->timings.nvddr; +} + +/** * struct nand_op_cmd_instr - Definition of a command instruction * @opcode: the command to issue in one cycle */ @@ -1413,7 +1563,6 @@ void nand_cleanup(struct nand_chip *chip); * instruction and have no physical pin to check it. */ int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms); -struct gpio_desc; int nand_gpio_waitrdy(struct nand_chip *chip, struct gpio_desc *gpiod, unsigned long timeout_ms); @@ -1446,4 +1595,8 @@ static inline void *nand_get_data_buf(struct nand_chip *chip) return chip->data_buf; } +/* Parse the gpio-cs property */ +int rawnand_dt_parse_gpio_cs(struct device *dev, struct gpio_desc ***cs_array, + unsigned int *ncs_array); + #endif /* __LINUX_MTD_RAWNAND_H */ diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 98ed91b529ea..f67457748ed8 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -383,6 +383,7 @@ struct spi_nor_flash_parameter; * @read_proto: the SPI protocol for read operations * @write_proto: the SPI protocol for write operations * @reg_proto: the SPI protocol for read_reg/write_reg/erase operations + * @sfdp: the SFDP data of the flash * @controller_ops: SPI NOR controller driver specific operations. * @params: [FLASH-SPECIFIC] SPI NOR flash parameters and settings. * The structure includes legacy flash parameters and @@ -412,6 +413,7 @@ struct spi_nor { bool sst_write_second; u32 flags; enum spi_nor_cmd_ext cmd_ext_type; + struct sfdp *sfdp; const struct spi_nor_controller_ops *controller_ops; diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h index e162b757b6d5..471cb7b9e896 100644 --- a/include/linux/nvmem-provider.h +++ b/include/linux/nvmem-provider.h @@ -57,6 +57,7 @@ struct nvmem_keepout { * @type: Type of the nvmem storage * @read_only: Device is read-only. * @root_only: Device is accessibly to root only. + * @of_node: If given, this will be used instead of the parent's of_node. * @no_of_node: Device should not use the parent's of_node even if it's !NULL. * @reg_read: Callback to read data. * @reg_write: Callback to write data. @@ -86,6 +87,7 @@ struct nvmem_config { enum nvmem_type type; bool read_only; bool root_only; + struct device_node *of_node; bool no_of_node; nvmem_reg_read_t reg_read; nvmem_reg_write_t reg_write; diff --git a/include/linux/pl353-smc.h b/include/linux/pl353-smc.h deleted file mode 100644 index 0e0d3df9bf72..000000000000 --- a/include/linux/pl353-smc.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * ARM PL353 SMC Driver Header - * - * Copyright (C) 2012 - 2018 Xilinx, Inc - */ - -#ifndef __LINUX_PL353_SMC_H -#define __LINUX_PL353_SMC_H - -enum pl353_smc_ecc_mode { - PL353_SMC_ECCMODE_BYPASS = 0, - PL353_SMC_ECCMODE_APB = 1, - PL353_SMC_ECCMODE_MEM = 2 -}; - -enum pl353_smc_mem_width { - PL353_SMC_MEM_WIDTH_8 = 0, - PL353_SMC_MEM_WIDTH_16 = 1 -}; - -u32 pl353_smc_get_ecc_val(int ecc_reg); -bool pl353_smc_ecc_is_busy(void); -int pl353_smc_get_nand_int_status_raw(void); -void pl353_smc_clr_nand_int(void); -int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode); -int pl353_smc_set_ecc_pg_size(unsigned int pg_sz); -int pl353_smc_set_buswidth(unsigned int bw); -void pl353_smc_set_cycles(u32 timings[]); -#endif |