diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/ceph/osd_client.h | 8 | ||||
| -rw-r--r-- | include/linux/clocksource.h | 3 | ||||
| -rw-r--r-- | include/linux/device.h | 2 | ||||
| -rw-r--r-- | include/linux/i2c.h | 3 | ||||
| -rw-r--r-- | include/linux/init_task.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/tps65910.h | 3 | ||||
| -rw-r--r-- | include/linux/netdevice.h | 2 | ||||
| -rw-r--r-- | include/linux/nfs_fs.h | 3 | ||||
| -rw-r--r-- | include/linux/nfs_xdr.h | 1 | ||||
| -rw-r--r-- | include/linux/pci-ats.h | 6 | ||||
| -rw-r--r-- | include/linux/pci.h | 2 | ||||
| -rw-r--r-- | include/linux/pm.h | 229 | ||||
| -rw-r--r-- | include/linux/pstore.h | 4 | ||||
| -rw-r--r-- | include/linux/sched.h | 1 | ||||
| -rw-r--r-- | include/linux/serial.h | 14 | ||||
| -rw-r--r-- | include/linux/virtio_config.h | 2 | ||||
| -rw-r--r-- | include/linux/virtio_mmio.h | 2 |
17 files changed, 170 insertions, 116 deletions
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index f88eacb111d4..7c05ac202d90 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -10,6 +10,12 @@ #include "osdmap.h" #include "messenger.h" +/* + * Maximum object name size + * (must be at least as big as RBD_MAX_MD_NAME_LEN -- currently 100) + */ +#define MAX_OBJ_NAME_SIZE 100 + struct ceph_msg; struct ceph_snap_context; struct ceph_osd_request; @@ -75,7 +81,7 @@ struct ceph_osd_request { struct inode *r_inode; /* for use by callbacks */ void *r_priv; /* ditto */ - char r_oid[40]; /* object name */ + char r_oid[MAX_OBJ_NAME_SIZE]; /* object name */ int r_oid_len; unsigned long r_stamp; /* send OR check time */ diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 139c4db55f17..c86c940d1de3 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -156,6 +156,7 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * @mult: cycle to nanosecond multiplier * @shift: cycle to nanosecond divisor (power of two) * @max_idle_ns: max idle time permitted by the clocksource (nsecs) + * @maxadj maximum adjustment value to mult (~11%) * @flags: flags describing special properties * @archdata: arch-specific data * @suspend: suspend function for the clocksource, if necessary @@ -172,7 +173,7 @@ struct clocksource { u32 mult; u32 shift; u64 max_idle_ns; - + u32 maxadj; #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA struct arch_clocksource_data archdata; #endif diff --git a/include/linux/device.h b/include/linux/device.h index 52b3a4111df9..3136ede5a1e1 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -69,7 +69,7 @@ extern void bus_remove_file(struct bus_type *, struct bus_attribute *); * @resume: Called to bring a device on this bus out of sleep mode. * @pm: Power management operations of this bus, callback the specific * device driver's pm-ops. - * @iommu_ops IOMMU specific operations for this bus, used to attach IOMMU + * @iommu_ops: IOMMU specific operations for this bus, used to attach IOMMU * driver implementations to a bus and allow the driver to do * bus-specific setup * @p: The private data of the driver core, only the driver core can diff --git a/include/linux/i2c.h b/include/linux/i2c.h index a81bf6d23b3e..07d103a06d64 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -432,9 +432,6 @@ void i2c_unlock_adapter(struct i2c_adapter *); /* Internal numbers to terminate lists */ #define I2C_CLIENT_END 0xfffeU -/* The numbers to use to set I2C bus address */ -#define ANY_I2C_BUS 0xffff - /* Construct an I2C_CLIENT_END-terminated array of i2c addresses */ #define I2C_ADDRS(addr, addrs...) \ ((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END }) diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 08ffab01e76c..94b1e356c02a 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -184,7 +184,6 @@ extern struct cred init_cred; [PIDTYPE_SID] = INIT_PID_LINK(PIDTYPE_SID), \ }, \ .thread_group = LIST_HEAD_INIT(tsk.thread_group), \ - .dirties = INIT_PROP_LOCAL_SINGLE(dirties), \ INIT_IDS \ INIT_PERF_EVENTS(tsk) \ INIT_TRACE_IRQFLAGS \ diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 82b4c8801a4f..8bf2cb9502dd 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -243,7 +243,8 @@ /*Registers VDD1, VDD2 voltage values definitions */ -#define VDD1_2_NUM_VOLTS 73 +#define VDD1_2_NUM_VOLT_FINE 73 +#define VDD1_2_NUM_VOLT_COARSE 3 #define VDD1_2_MIN_VOLT 6000 #define VDD1_2_OFFSET 125 diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 21440e31fdab..eef257c76a40 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2552,6 +2552,8 @@ extern void net_disable_timestamp(void); extern void *dev_seq_start(struct seq_file *seq, loff_t *pos); extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos); extern void dev_seq_stop(struct seq_file *seq, void *v); +extern int dev_seq_open_ops(struct inode *inode, struct file *file, + const struct seq_operations *ops); #endif extern int netdev_class_create_file(struct class_attribute *class_attr); diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index ab2c6343361a..92ecf5585fac 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -410,6 +410,9 @@ extern const struct inode_operations nfs_file_inode_operations; extern const struct inode_operations nfs3_file_inode_operations; #endif /* CONFIG_NFS_V3 */ extern const struct file_operations nfs_file_operations; +#ifdef CONFIG_NFS_V4 +extern const struct file_operations nfs4_file_operations; +#endif /* CONFIG_NFS_V4 */ extern const struct address_space_operations nfs_file_aops; extern const struct address_space_operations nfs_dir_aops; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index c74595ba7094..2a7c533be5dd 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1192,6 +1192,7 @@ struct nfs_rpc_ops { const struct dentry_operations *dentry_ops; const struct inode_operations *dir_inode_ops; const struct inode_operations *file_inode_ops; + const struct file_operations *file_ops; int (*getroot) (struct nfs_server *, struct nfs_fh *, struct nfs_fsinfo *); diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h index e3d0b3890249..7ef68724f0f0 100644 --- a/include/linux/pci-ats.h +++ b/include/linux/pci-ats.h @@ -12,7 +12,7 @@ struct pci_ats { unsigned int is_enabled:1; /* Enable bit is set */ }; -#ifdef CONFIG_PCI_IOV +#ifdef CONFIG_PCI_ATS extern int pci_enable_ats(struct pci_dev *dev, int ps); extern void pci_disable_ats(struct pci_dev *dev); @@ -29,7 +29,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev) return dev->ats && dev->ats->is_enabled; } -#else /* CONFIG_PCI_IOV */ +#else /* CONFIG_PCI_ATS */ static inline int pci_enable_ats(struct pci_dev *dev, int ps) { @@ -50,7 +50,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev) return 0; } -#endif /* CONFIG_PCI_IOV */ +#endif /* CONFIG_PCI_ATS */ #ifdef CONFIG_PCI_PRI diff --git a/include/linux/pci.h b/include/linux/pci.h index 337df0d5d5f7..7cda65b5f798 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -338,7 +338,7 @@ struct pci_dev { struct list_head msi_list; #endif struct pci_vpd *vpd; -#ifdef CONFIG_PCI_IOV +#ifdef CONFIG_PCI_ATS union { struct pci_sriov *sriov; /* SR-IOV capability related */ struct pci_dev *physfn; /* the PF this VF is associated with */ diff --git a/include/linux/pm.h b/include/linux/pm.h index 5c4c8b18c8b7..3f3ed83a9aa5 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -54,118 +54,145 @@ typedef struct pm_message { /** * struct dev_pm_ops - device PM callbacks * - * Several driver power state transitions are externally visible, affecting + * Several device power state transitions are externally visible, affecting * the state of pending I/O queues and (for drivers that touch hardware) * interrupts, wakeups, DMA, and other hardware state. There may also be - * internal transitions to various low power modes, which are transparent + * internal transitions to various low-power modes which are transparent * to the rest of the driver stack (such as a driver that's ON gating off * clocks which are not in active use). * - * The externally visible transitions are handled with the help of the following - * callbacks included in this structure: - * - * @prepare: Prepare the device for the upcoming transition, but do NOT change - * its hardware state. Prevent new children of the device from being - * registered after @prepare() returns (the driver's subsystem and - * generally the rest of the kernel is supposed to prevent new calls to the - * probe method from being made too once @prepare() has succeeded). If - * @prepare() detects a situation it cannot handle (e.g. registration of a - * child already in progress), it may return -EAGAIN, so that the PM core - * can execute it once again (e.g. after the new child has been registered) - * to recover from the race condition. This method is executed for all - * kinds of suspend transitions and is followed by one of the suspend - * callbacks: @suspend(), @freeze(), or @poweroff(). - * The PM core executes @prepare() for all devices before starting to - * execute suspend callbacks for any of them, so drivers may assume all of - * the other devices to be present and functional while @prepare() is being - * executed. In particular, it is safe to make GFP_KERNEL memory - * allocations from within @prepare(). However, drivers may NOT assume - * anything about the availability of the user space at that time and it - * is not correct to request firmware from within @prepare() (it's too - * late to do that). [To work around this limitation, drivers may - * register suspend and hibernation notifiers that are executed before the - * freezing of tasks.] + * The externally visible transitions are handled with the help of callbacks + * included in this structure in such a way that two levels of callbacks are + * involved. First, the PM core executes callbacks provided by PM domains, + * device types, classes and bus types. They are the subsystem-level callbacks + * supposed to execute callbacks provided by device drivers, although they may + * choose not to do that. If the driver callbacks are executed, they have to + * collaborate with the subsystem-level callbacks to achieve the goals + * appropriate for the given system transition, given transition phase and the + * subsystem the device belongs to. + * + * @prepare: The principal role of this callback is to prevent new children of + * the device from being registered after it has returned (the driver's + * subsystem and generally the rest of the kernel is supposed to prevent + * new calls to the probe method from being made too once @prepare() has + * succeeded). If @prepare() detects a situation it cannot handle (e.g. + * registration of a child already in progress), it may return -EAGAIN, so + * that the PM core can execute it once again (e.g. after a new child has + * been registered) to recover from the race condition. + * This method is executed for all kinds of suspend transitions and is + * followed by one of the suspend callbacks: @suspend(), @freeze(), or + * @poweroff(). The PM core executes subsystem-level @prepare() for all + * devices before starting to invoke suspend callbacks for any of them, so + * generally devices may be assumed to be functional or to respond to + * runtime resume requests while @prepare() is being executed. However, + * device drivers may NOT assume anything about the availability of user + * space at that time and it is NOT valid to request firmware from within + * @prepare() (it's too late to do that). It also is NOT valid to allocate + * substantial amounts of memory from @prepare() in the GFP_KERNEL mode. + * [To work around these limitations, drivers may register suspend and + * hibernation notifiers to be executed before the freezing of tasks.] * * @complete: Undo the changes made by @prepare(). This method is executed for * all kinds of resume transitions, following one of the resume callbacks: * @resume(), @thaw(), @restore(). Also called if the state transition - * fails before the driver's suspend callback (@suspend(), @freeze(), - * @poweroff()) can be executed (e.g. if the suspend callback fails for one + * fails before the driver's suspend callback: @suspend(), @freeze() or + * @poweroff(), can be executed (e.g. if the suspend callback fails for one * of the other devices that the PM core has unsuccessfully attempted to * suspend earlier). - * The PM core executes @complete() after it has executed the appropriate - * resume callback for all devices. + * The PM core executes subsystem-level @complete() after it has executed + * the appropriate resume callbacks for all devices. * * @suspend: Executed before putting the system into a sleep state in which the - * contents of main memory are preserved. Quiesce the device, put it into - * a low power state appropriate for the upcoming system state (such as - * PCI_D3hot), and enable wakeup events as appropriate. + * contents of main memory are preserved. The exact action to perform + * depends on the device's subsystem (PM domain, device type, class or bus + * type), but generally the device must be quiescent after subsystem-level + * @suspend() has returned, so that it doesn't do any I/O or DMA. + * Subsystem-level @suspend() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * * @resume: Executed after waking the system up from a sleep state in which the - * contents of main memory were preserved. Put the device into the - * appropriate state, according to the information saved in memory by the - * preceding @suspend(). The driver starts working again, responding to - * hardware events and software requests. The hardware may have gone - * through a power-off reset, or it may have maintained state from the - * previous suspend() which the driver may rely on while resuming. On most - * platforms, there are no restrictions on availability of resources like - * clocks during @resume(). + * contents of main memory were preserved. The exact action to perform + * depends on the device's subsystem, but generally the driver is expected + * to start working again, responding to hardware events and software + * requests (the device itself may be left in a low-power state, waiting + * for a runtime resume to occur). The state of the device at the time its + * driver's @resume() callback is run depends on the platform and subsystem + * the device belongs to. On most platforms, there are no restrictions on + * availability of resources like clocks during @resume(). + * Subsystem-level @resume() is executed for all devices after invoking + * subsystem-level @resume_noirq() for all of them. * * @freeze: Hibernation-specific, executed before creating a hibernation image. - * Quiesce operations so that a consistent image can be created, but do NOT - * otherwise put the device into a low power device state and do NOT emit - * system wakeup events. Save in main memory the device settings to be - * used by @restore() during the subsequent resume from hibernation or by - * the subsequent @thaw(), if the creation of the image or the restoration - * of main memory contents from it fails. + * Analogous to @suspend(), but it should not enable the device to signal + * wakeup events or change its power state. The majority of subsystems + * (with the notable exception of the PCI bus type) expect the driver-level + * @freeze() to save the device settings in memory to be used by @restore() + * during the subsequent resume from hibernation. + * Subsystem-level @freeze() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * * @thaw: Hibernation-specific, executed after creating a hibernation image OR - * if the creation of the image fails. Also executed after a failing + * if the creation of an image has failed. Also executed after a failing * attempt to restore the contents of main memory from such an image. * Undo the changes made by the preceding @freeze(), so the device can be * operated in the same way as immediately before the call to @freeze(). + * Subsystem-level @thaw() is executed for all devices after invoking + * subsystem-level @thaw_noirq() for all of them. It also may be executed + * directly after @freeze() in case of a transition error. * * @poweroff: Hibernation-specific, executed after saving a hibernation image. - * Quiesce the device, put it into a low power state appropriate for the - * upcoming system state (such as PCI_D3hot), and enable wakeup events as - * appropriate. + * Analogous to @suspend(), but it need not save the device's settings in + * memory. + * Subsystem-level @poweroff() is executed for all devices after invoking + * subsystem-level @prepare() for all of them. * * @restore: Hibernation-specific, executed after restoring the contents of main - * memory from a hibernation image. Driver starts working again, - * responding to hardware events and software requests. Drivers may NOT - * make ANY assumptions about the hardware state right prior to @restore(). - * On most platforms, there are no restrictions on availability of - * resources like clocks during @restore(). - * - * @suspend_noirq: Complete the operations of ->suspend() by carrying out any - * actions required for suspending the device that need interrupts to be - * disabled - * - * @resume_noirq: Prepare for the execution of ->resume() by carrying out any - * actions required for resuming the device that need interrupts to be - * disabled - * - * @freeze_noirq: Complete the operations of ->freeze() by carrying out any - * actions required for freezing the device that need interrupts to be - * disabled - * - * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any - * actions required for thawing the device that need interrupts to be - * disabled - * - * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any - * actions required for handling the device that need interrupts to be - * disabled - * - * @restore_noirq: Prepare for the execution of ->restore() by carrying out any - * actions required for restoring the operations of the device that need - * interrupts to be disabled + * memory from a hibernation image, analogous to @resume(). + * + * @suspend_noirq: Complete the actions started by @suspend(). Carry out any + * additional operations required for suspending the device that might be + * racing with its driver's interrupt handler, which is guaranteed not to + * run while @suspend_noirq() is being executed. + * It generally is expected that the device will be in a low-power state + * (appropriate for the target system sleep state) after subsystem-level + * @suspend_noirq() has returned successfully. If the device can generate + * system wakeup signals and is enabled to wake up the system, it should be + * configured to do so at that time. However, depending on the platform + * and device's subsystem, @suspend() may be allowed to put the device into + * the low-power state and configure it to generate wakeup signals, in + * which case it generally is not necessary to define @suspend_noirq(). + * + * @resume_noirq: Prepare for the execution of @resume() by carrying out any + * operations required for resuming the device that might be racing with + * its driver's interrupt handler, which is guaranteed not to run while + * @resume_noirq() is being executed. + * + * @freeze_noirq: Complete the actions started by @freeze(). Carry out any + * additional operations required for freezing the device that might be + * racing with its driver's interrupt handler, which is guaranteed not to + * run while @freeze_noirq() is being executed. + * The power state of the device should not be changed by either @freeze() + * or @freeze_noirq() and it should not be configured to signal system + * wakeup by any of these callbacks. + * + * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any + * operations required for thawing the device that might be racing with its + * driver's interrupt handler, which is guaranteed not to run while + * @thaw_noirq() is being executed. + * + * @poweroff_noirq: Complete the actions started by @poweroff(). Analogous to + * @suspend_noirq(), but it need not save the device's settings in memory. + * + * @restore_noirq: Prepare for the execution of @restore() by carrying out any + * operations required for thawing the device that might be racing with its + * driver's interrupt handler, which is guaranteed not to run while + * @restore_noirq() is being executed. Analogous to @resume_noirq(). * * All of the above callbacks, except for @complete(), return error codes. * However, the error codes returned by the resume operations, @resume(), - * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq() do + * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do * not cause the PM core to abort the resume transition during which they are - * returned. The error codes returned in that cases are only printed by the PM + * returned. The error codes returned in those cases are only printed by the PM * core to the system logs for debugging purposes. Still, it is recommended * that drivers only return error codes from their resume methods in case of an * unrecoverable failure (i.e. when the device being handled refuses to resume @@ -174,31 +201,43 @@ typedef struct pm_message { * their children. * * It is allowed to unregister devices while the above callbacks are being - * executed. However, it is not allowed to unregister a device from within any - * of its own callbacks. + * executed. However, a callback routine must NOT try to unregister the device + * it was called for, although it may unregister children of that device (for + * example, if it detects that a child was unplugged while the system was + * asleep). + * + * Refer to Documentation/power/devices.txt for more information about the role + * of the above callbacks in the system suspend process. * - * There also are the following callbacks related to run-time power management - * of devices: + * There also are callbacks related to runtime power management of devices. + * Again, these callbacks are executed by the PM core only for subsystems + * (PM domains, device types, classes and bus types) and the subsystem-level + * callbacks are supposed to invoke the driver callbacks. Moreover, the exact + * actions to be performed by a device driver's callbacks generally depend on + * the platform and subsystem the device belongs to. * * @runtime_suspend: Prepare the device for a condition in which it won't be * able to communicate with the CPU(s) and RAM due to power management. - * This need not mean that the device should be put into a low power state. + * This need not mean that the device should be put into a low-power state. * For example, if the device is behind a link which is about to be turned * off, the device may remain at full power. If the device does go to low - * power and is capable of generating run-time wake-up events, remote - * wake-up (i.e., a hardware mechanism allowing the device to request a - * change of its power state via a wake-up event, such as PCI PME) should - * be enabled for it. + * power and is capable of generating runtime wakeup events, remote wakeup + * (i.e., a hardware mechanism allowing the device to request a change of + * its power state via an interrupt) should be enabled for it. * * @runtime_resume: Put the device into the fully active state in response to a - * wake-up event generated by hardware or at the request of software. If - * necessary, put the device into the full power state and restore its + * wakeup event generated by hardware or at the request of software. If + * necessary, put the device into the full-power state and restore its * registers, so that it is fully operational. * - * @runtime_idle: Device appears to be inactive and it might be put into a low - * power state if all of the necessary conditions are satisfied. Check + * @runtime_idle: Device appears to be inactive and it might be put into a + * low-power state if all of the necessary conditions are satisfied. Check * these conditions and handle the device as appropriate, possibly queueing * a suspend request for it. The return value is ignored by the PM core. + * + * Refer to Documentation/power/runtime_pm.txt for more information about the + * role of the above callbacks in device runtime power management. + * */ struct dev_pm_ops { diff --git a/include/linux/pstore.h b/include/linux/pstore.h index ea567321ae3c..2ca8cde5459d 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -35,10 +35,12 @@ struct pstore_info { spinlock_t buf_lock; /* serialize access to 'buf' */ char *buf; size_t bufsize; + struct mutex read_mutex; /* serialize open/read/close */ int (*open)(struct pstore_info *psi); int (*close)(struct pstore_info *psi); ssize_t (*read)(u64 *id, enum pstore_type_id *type, - struct timespec *time, struct pstore_info *psi); + struct timespec *time, char **buf, + struct pstore_info *psi); int (*write)(enum pstore_type_id type, u64 *id, unsigned int part, size_t size, struct pstore_info *psi); int (*erase)(enum pstore_type_id type, u64 id, diff --git a/include/linux/sched.h b/include/linux/sched.h index 68daf4f27e2c..1c4f3e9b9bc5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1521,7 +1521,6 @@ struct task_struct { #ifdef CONFIG_FAULT_INJECTION int make_it_fail; #endif - struct prop_local_single dirties; /* * when (nr_dirtied >= nr_dirtied_pause), it's time to call * balance_dirty_pages() for some dirty throttling pause diff --git a/include/linux/serial.h b/include/linux/serial.h index 97ff8e27a6cc..3d86517fe7d5 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -207,13 +207,15 @@ struct serial_icounter_struct { struct serial_rs485 { __u32 flags; /* RS485 feature flags */ -#define SER_RS485_ENABLED (1 << 0) -#define SER_RS485_RTS_ON_SEND (1 << 1) -#define SER_RS485_RTS_AFTER_SEND (1 << 2) -#define SER_RS485_RTS_BEFORE_SEND (1 << 3) +#define SER_RS485_ENABLED (1 << 0) /* If enabled */ +#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for + RTS pin when + sending */ +#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for + RTS pin after sent*/ #define SER_RS485_RX_DURING_TX (1 << 4) - __u32 delay_rts_before_send; /* Milliseconds */ - __u32 delay_rts_after_send; /* Milliseconds */ + __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ + __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ __u32 padding[5]; /* Memory is cheap, new structs are a royal PITA .. */ }; diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 63f98d0a8efa..5206d6541da5 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -85,6 +85,8 @@ * @reset: reset the device * vdev: the virtio device * After this, status and feature negotiation must be done again + * Device must not be reset from its vq/config callbacks, or in + * parallel with being added/removed. * @find_vqs: find virtqueues and instantiate them. * vdev: the virtio_device * nvqs: the number of virtqueues to find diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h index 27c7edefbc86..5c7b6f0daef8 100644 --- a/include/linux/virtio_mmio.h +++ b/include/linux/virtio_mmio.h @@ -63,7 +63,7 @@ #define VIRTIO_MMIO_GUEST_FEATURES 0x020 /* Activated features set selector - Write Only */ -#define VIRTIO_MMIO_GUEST_FEATURES_SET 0x024 +#define VIRTIO_MMIO_GUEST_FEATURES_SEL 0x024 /* Guest's memory page size in bytes - Write Only */ #define VIRTIO_MMIO_GUEST_PAGE_SIZE 0x028 |