diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/mtd/nand.h | 103 |
1 files changed, 34 insertions, 69 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 05c6ecc07036..014ceefbec0e 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -11,47 +11,11 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Info: - * Contains standard defines and IDs for NAND flash devices + * Info: + * Contains standard defines and IDs for NAND flash devices * - * Changelog: - * 01-31-2000 DMW Created - * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers - * so it can be used by other NAND flash device - * drivers. I also changed the copyright since none - * of the original contents of this file are specific - * to DoC devices. David can whack me with a baseball - * bat later if I did something naughty. - * 10-11-2000 SJH Added private NAND flash structure for driver - * 10-24-2000 SJH Added prototype for 'nand_scan' function - * 10-29-2001 TG changed nand_chip structure to support - * hardwarespecific function for accessing control lines - * 02-21-2002 TG added support for different read/write adress and - * ready/busy line access function - * 02-26-2002 TG added chip_delay to nand_chip structure to optimize - * command delay times for different chips - * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate - * defines in jffs2/wbuf.c - * 08-07-2002 TG forced bad block location to byte 5 of OOB, even if - * CONFIG_MTD_NAND_ECC_JFFS2 is not set - * 08-10-2002 TG extensions to nand_chip structure to support HW-ECC - * - * 08-29-2002 tglx nand_chip structure: data_poi for selecting - * internal / fs-driver buffer - * support for 6byte/512byte hardware ECC - * read_ecc, write_ecc extended for different oob-layout - * oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB, - * NAND_YAFFS_OOB - * 11-25-2002 tglx Added Manufacturer code FUJITSU, NATIONAL - * Split manufacturer and device ID structures - * - * 02-08-2004 tglx added option field to nand structure for chip anomalities - * 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id - * update of nand_chip structure description - * 01-17-2005 dmarlin added extended commands for AG-AND device and added option - * for BBT_AUTO_REFRESH. - * 01-20-2005 dmarlin added optional pointer to hardware specific callback for - * extra error status checks. + * Changelog: + * See git changelog. */ #ifndef __LINUX_MTD_NAND_H #define __LINUX_MTD_NAND_H @@ -68,7 +32,8 @@ extern int nand_scan (struct mtd_info *mtd, int max_chips); extern void nand_release (struct mtd_info *mtd); /* Read raw data from the device without ECC */ -extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen); +extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, + size_t len, size_t ooblen); /* The maximum number of NAND chips in an array */ @@ -84,7 +49,7 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_ * Constants for hardware specific CLE/ALE/NCE function */ /* Select the chip by setting nCE to low */ -#define NAND_CTL_SETNCE 1 +#define NAND_CTL_SETNCE 1 /* Deselect the chip by setting nCE to high */ #define NAND_CTL_CLRNCE 2 /* Select the command latch by setting CLE to high */ @@ -285,19 +250,19 @@ struct nand_hw_control { * is read from the chip status register * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready - * @calculate_ecc: [REPLACEABLE] function for ecc calculation or readback from ecc hardware + * @calculate_ecc: [REPLACEABLE] function for ecc calculation or readback from ecc hardware * @correct_data: [REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw) * @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only * be provided if a hardware ECC is available * @erase_cmd: [INTERN] erase command write function, selectable due to AND support * @scan_bbt: [REPLACEABLE] function to scan bad block table * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines - * @eccsize: [INTERN] databytes used per ecc-calculation - * @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step + * @eccsize: [INTERN] databytes used per ecc-calculation + * @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step * @eccsteps: [INTERN] number of ecc calculation steps per page * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR) * @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress - * @state: [INTERN] the current state of the NAND device + * @state: [INTERN] the current state of the NAND device * @page_shift: [INTERN] number of address bits in a page (column address bits) * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry @@ -327,7 +292,7 @@ struct nand_hw_control { struct nand_chip { void __iomem *IO_ADDR_R; - void __iomem *IO_ADDR_W; + void __iomem *IO_ADDR_W; u_char (*read_byte)(struct mtd_info *mtd); void (*write_byte)(struct mtd_info *mtd, u_char byte); @@ -340,12 +305,12 @@ struct nand_chip { void (*select_chip)(struct mtd_info *mtd, int chip); int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); - void (*hwcontrol)(struct mtd_info *mtd, int cmd); - int (*dev_ready)(struct mtd_info *mtd); - void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); - int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state); + void (*hwcontrol)(struct mtd_info *mtd, int cmd); + int (*dev_ready)(struct mtd_info *mtd); + void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); + int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state); int (*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); - int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); + int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); void (*enable_hwecc)(struct mtd_info *mtd, int mode); void (*erase_cmd)(struct mtd_info *mtd, int page); int (*scan_bbt)(struct mtd_info *mtd); @@ -353,14 +318,14 @@ struct nand_chip { int eccsize; int eccbytes; int eccsteps; - int chip_delay; + int chip_delay; wait_queue_head_t wq; - nand_state_t state; - int page_shift; + nand_state_t state; + int page_shift; int phys_erase_shift; int bbt_erase_shift; int chip_shift; - u_char *data_buf; + u_char *data_buf; u_char *oob_buf; int oobdirty; u_char *data_poi; @@ -389,19 +354,19 @@ struct nand_chip { #define NAND_MFR_NATIONAL 0x8f #define NAND_MFR_RENESAS 0x07 #define NAND_MFR_STMICRO 0x20 -#define NAND_MFR_HYNIX 0xad +#define NAND_MFR_HYNIX 0xad /** * struct nand_flash_dev - NAND Flash Device ID Structure * - * @name: Identify the device type - * @id: device ID code - * @pagesize: Pagesize in bytes. Either 256 or 512 or 0 + * @name: Identify the device type + * @id: device ID code + * @pagesize: Pagesize in bytes. Either 256 or 512 or 0 * If the pagesize is 0, then the real pagesize * and the eraseize are determined from the * extended id bytes in the chip - * @erasesize: Size of an erase block in the flash device. - * @chipsize: Total chipsize in Mega Bytes + * @erasesize: Size of an erase block in the flash device. + * @chipsize: Total chipsize in Mega Bytes * @options: Bitfield to store chip relevant options */ struct nand_flash_dev { @@ -416,7 +381,7 @@ struct nand_flash_dev { /** * struct nand_manufacturers - NAND Flash Manufacturer ID Structure * @name: Manufacturer name - * @id: manufacturer ID code of device. + * @id: manufacturer ID code of device. */ struct nand_manufacturers { int id; @@ -456,7 +421,7 @@ struct nand_bbt_descr { int veroffs; uint8_t version[NAND_MAX_CHIPS]; int len; - int maxblocks; + int maxblocks; int reserved_block_code; uint8_t *pattern; }; @@ -501,8 +466,8 @@ extern int nand_default_bbt (struct mtd_info *mtd); extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt); extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt); extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf, u_char * oob_buf, - struct nand_oobinfo *oobsel, int flags); + size_t * retlen, u_char * buf, u_char * oob_buf, + struct nand_oobinfo *oobsel, int flags); /* * Constants for oob configuration @@ -526,7 +491,7 @@ struct platform_nand_chip { int chip_offset; int nr_partitions; struct mtd_partition *partitions; - int chip_delay; + int chip_delay; unsigned int options; void *priv; }; @@ -542,8 +507,8 @@ struct platform_nand_chip { * All fields are optional and depend on the hardware driver requirements */ struct platform_nand_ctrl { - void (*hwcontrol)(struct mtd_info *mtd, int cmd); - int (*dev_ready)(struct mtd_info *mtd); + void (*hwcontrol)(struct mtd_info *mtd, int cmd); + int (*dev_ready)(struct mtd_info *mtd); void (*select_chip)(struct mtd_info *mtd, int chip); void *priv; }; |