diff options
Diffstat (limited to 'include/linux/slimbus.h')
| -rw-r--r-- | include/linux/slimbus.h | 164 |
1 files changed, 164 insertions, 0 deletions
diff --git a/include/linux/slimbus.h b/include/linux/slimbus.h new file mode 100644 index 000000000000..c36cf121d2cd --- /dev/null +++ b/include/linux/slimbus.h @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#ifndef _LINUX_SLIMBUS_H +#define _LINUX_SLIMBUS_H +#include <linux/device.h> +#include <linux/module.h> +#include <linux/completion.h> +#include <linux/mod_devicetable.h> + +extern struct bus_type slimbus_bus; + +/** + * struct slim_eaddr - Enumeration address for a SLIMbus device + * @manf_id: Manufacturer Id for the device + * @prod_code: Product code + * @dev_index: Device index + * @instance: Instance value + */ +struct slim_eaddr { + u16 manf_id; + u16 prod_code; + u8 dev_index; + u8 instance; +} __packed; + +/** + * enum slim_device_status - slim device status + * @SLIM_DEVICE_STATUS_DOWN: Slim device is absent or not reported yet. + * @SLIM_DEVICE_STATUS_UP: Slim device is announced on the bus. + * @SLIM_DEVICE_STATUS_RESERVED: Reserved for future use. + */ +enum slim_device_status { + SLIM_DEVICE_STATUS_DOWN = 0, + SLIM_DEVICE_STATUS_UP, + SLIM_DEVICE_STATUS_RESERVED, +}; + +struct slim_controller; + +/** + * struct slim_device - Slim device handle. + * @dev: Driver model representation of the device. + * @e_addr: Enumeration address of this device. + * @status: slim device status + * @ctrl: slim controller instance. + * @laddr: 1-byte Logical address of this device. + * @is_laddr_valid: indicates if the laddr is valid or not + * + * This is the client/device handle returned when a SLIMbus + * device is registered with a controller. + * Pointer to this structure is used by client-driver as a handle. + */ +struct slim_device { + struct device dev; + struct slim_eaddr e_addr; + struct slim_controller *ctrl; + enum slim_device_status status; + u8 laddr; + bool is_laddr_valid; +}; + +#define to_slim_device(d) container_of(d, struct slim_device, dev) + +/** + * struct slim_driver - SLIMbus 'generic device' (slave) device driver + * (similar to 'spi_device' on SPI) + * @probe: Binds this driver to a SLIMbus device. + * @remove: Unbinds this driver from the SLIMbus device. + * @shutdown: Standard shutdown callback used during powerdown/halt. + * @device_status: This callback is called when + * - The device reports present and gets a laddr assigned + * - The device reports absent, or the bus goes down. + * @driver: SLIMbus device drivers should initialize name and owner field of + * this structure + * @id_table: List of SLIMbus devices supported by this driver + */ + +struct slim_driver { + int (*probe)(struct slim_device *sl); + void (*remove)(struct slim_device *sl); + void (*shutdown)(struct slim_device *sl); + int (*device_status)(struct slim_device *sl, + enum slim_device_status s); + struct device_driver driver; + const struct slim_device_id *id_table; +}; +#define to_slim_driver(d) container_of(d, struct slim_driver, driver) + +/** + * struct slim_val_inf - Slimbus value or information element + * @start_offset: Specifies starting offset in information/value element map + * @rbuf: buffer to read the values + * @wbuf: buffer to write + * @num_bytes: upto 16. This ensures that the message will fit the slicesize + * per SLIMbus spec + * @comp: completion for asynchronous operations, valid only if TID is + * required for transaction, like REQUEST operations. + * Rest of the transactions are synchronous anyway. + */ +struct slim_val_inf { + u16 start_offset; + u8 num_bytes; + u8 *rbuf; + const u8 *wbuf; + struct completion *comp; +}; + +/* + * use a macro to avoid include chaining to get THIS_MODULE + */ +#define slim_driver_register(drv) \ + __slim_driver_register(drv, THIS_MODULE) +int __slim_driver_register(struct slim_driver *drv, struct module *owner); +void slim_driver_unregister(struct slim_driver *drv); + +/** + * module_slim_driver() - Helper macro for registering a SLIMbus driver + * @__slim_driver: slimbus_driver struct + * + * Helper macro for SLIMbus drivers which do not do anything special in module + * init/exit. This eliminates a lot of boilerplate. Each module may only + * use this macro once, and calling it replaces module_init() and module_exit() + */ +#define module_slim_driver(__slim_driver) \ + module_driver(__slim_driver, slim_driver_register, \ + slim_driver_unregister) + +static inline void *slim_get_devicedata(const struct slim_device *dev) +{ + return dev_get_drvdata(&dev->dev); +} + +static inline void slim_set_devicedata(struct slim_device *dev, void *data) +{ + dev_set_drvdata(&dev->dev, data); +} + +struct slim_device *slim_get_device(struct slim_controller *ctrl, + struct slim_eaddr *e_addr); +int slim_get_logical_addr(struct slim_device *sbdev); + +/* Information Element management messages */ +#define SLIM_MSG_MC_REQUEST_INFORMATION 0x20 +#define SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION 0x21 +#define SLIM_MSG_MC_REPLY_INFORMATION 0x24 +#define SLIM_MSG_MC_CLEAR_INFORMATION 0x28 +#define SLIM_MSG_MC_REPORT_INFORMATION 0x29 + +/* Value Element management messages */ +#define SLIM_MSG_MC_REQUEST_VALUE 0x60 +#define SLIM_MSG_MC_REQUEST_CHANGE_VALUE 0x61 +#define SLIM_MSG_MC_REPLY_VALUE 0x64 +#define SLIM_MSG_MC_CHANGE_VALUE 0x68 + +int slim_xfer_msg(struct slim_device *sbdev, struct slim_val_inf *msg, + u8 mc); +int slim_readb(struct slim_device *sdev, u32 addr); +int slim_writeb(struct slim_device *sdev, u32 addr, u8 value); +int slim_read(struct slim_device *sdev, u32 addr, size_t count, u8 *val); +int slim_write(struct slim_device *sdev, u32 addr, size_t count, u8 *val); +#endif /* _LINUX_SLIMBUS_H */ |